API tools faq
paste
Latrina

Untitled

Latrina
Nov 26th, 2021
68
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.80 KB | None | 0 0
raw download clone embed print report
  1. +
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  3. [ 0.000000] Linux version 5.10.79-v8+ (root@localhost) (gcc (Alpine 10.3.1_git20210424) 10.3.1 20210424, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Mon Nov 22 16:48:15 UTC 2021
  4. [ 0.000000] random: fast init done
  5. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
  6. [ 0.000000] efi: UEFI not found.
  7. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
  8. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  9. [ 0.000000] Zone ranges:
  10. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  11. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
  12. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
  16. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  17. [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
  18. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
  19. [ 0.000000] percpu: Embedded 32 pages/cpu s91416 r8192 d31464 u131072
  20. [ 0.000000] Detected PIPT I-cache on CPU0
  21. [ 0.000000] CPU features: detected: Spectre-v2
  22. [ 0.000000] CPU features: detected: Spectre-v4
  23. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  24. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
  25. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:D5:B2:DE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 fsck.repair=yes cgroup_memory=1 cgroup_enable=memory
  26. [ 0.000000] cgroup: Enabling memory control group subsystem
  27. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  28. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  29. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  30. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
  31. [ 0.000000] Memory: 7931080K/8245248K available (11392K kernel code, 1948K rwdata, 3960K rodata, 3648K init, 1255K bss, 248632K reserved, 65536K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  33. [ 0.000000] ftrace: allocating 35683 entries in 140 pages
  34. [ 0.000000] ftrace: allocated 140 pages with 3 groups
  35. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  36. [ 0.000000] rcu: RCU event tracing is enabled.
  37. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  38. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  39. [ 0.000000] Rude variant of Tasks RCU enabled.
  40. [ 0.000000] Tracing variant of Tasks RCU enabled.
  41. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  42. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  43. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  44. [ 0.000000] GIC: Using split EOI/Deactivate mode
  45. [ 0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=1
  46. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  47. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  48. [ 0.000002] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  49. [ 0.000116] Console: colour dummy device 80x25
  50. [ 0.000335] printk: console [tty1] enabled
  51. [ 0.000368] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  52. [ 0.000385] pid_max: default: 32768 minimum: 301
  53. [ 0.000454] LSM: Security Framework initializing
  54. [ 0.000591] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  55. [ 0.000656] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  56. [ 0.002046] rcu: Hierarchical SRCU implementation.
  57. [ 0.002547] EFI services will not be available.
  58. [ 0.002784] smp: Bringing up secondary CPUs ...
  59. [ 0.003212] Detected PIPT I-cache on CPU1
  60. [ 0.003254] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  61. [ 0.003713] Detected PIPT I-cache on CPU2
  62. [ 0.003733] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  63. [ 0.004252] Detected PIPT I-cache on CPU3
  64. [ 0.004271] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  65. [ 0.004333] smp: Brought up 1 node, 4 CPUs
  66. [ 0.004351] SMP: Total of 4 processors activated.
  67. [ 0.004361] CPU features: detected: 32-bit EL0 Support
  68. [ 0.004370] CPU features: detected: CRC32 instructions
  69. [ 0.004379] CPU features: detected: 32-bit EL1 Support
  70. [ 0.018432] CPU: All CPU(s) started at EL2
  71. [ 0.018472] alternatives: patching kernel code
  72. [ 0.019509] devtmpfs: initialized
  73. [ 0.023953] Enabled cp15_barrier support
  74. [ 0.023988] Enabled setend support
  75. [ 0.024109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  76. [ 0.024129] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  77. [ 0.025445] pinctrl core: initialized pinctrl subsystem
  78. [ 0.025856] DMI not present or invalid.
  79. [ 0.026049] NET: Registered protocol family 16
  80. [ 0.027372] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  81. [ 0.027488] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  82. [ 0.027863] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  83. [ 0.027912] audit: initializing netlink subsys (disabled)
  84. [ 0.028139] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1
  85. [ 0.028354] thermal_sys: Registered thermal governor 'step_wise'
  86. [ 0.028559] cpuidle: using governor menu
  87. [ 0.028664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  88. [ 0.028740] ASID allocator initialised with 65536 entries
  89. [ 0.028803] Serial: AMBA PL011 UART driver
  90. [ 0.039535] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  91. [ 0.044092] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-03T18:14:56, variant start
  92. [ 0.048094] raspberrypi-firmware soc:firmware: Firmware hash is 40787ee5905644f639a2a0f6e00ae12e517a2211
  93. [ 0.064341] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  94. [ 0.065948] vgaarb: loaded
  95. [ 0.066145] SCSI subsystem initialized
  96. [ 0.066245] usbcore: registered new interface driver usbfs
  97. [ 0.066272] usbcore: registered new interface driver hub
  98. [ 0.066305] usbcore: registered new device driver usb
  99. [ 0.066438] usb_phy_generic phy: supply vcc not found, using dummy regulator
  100. [ 0.067187] clocksource: Switched to clocksource arch_sys_counter
  101. [ 0.478306] VFS: Disk quotas dquot_6.6.0
  102. [ 0.478364] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  103. [ 0.478442] FS-Cache: Loaded
  104. [ 0.478574] CacheFiles: Loaded
  105. [ 0.482798] NET: Registered protocol family 2
  106. [ 0.483384] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  107. [ 0.485884] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  108. [ 0.485940] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  109. [ 0.486130] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
  110. [ 0.487059] TCP: Hash tables configured (established 65536 bind 65536)
  111. [ 0.487318] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  112. [ 0.487387] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  113. [ 0.487616] NET: Registered protocol family 1
  114. [ 0.488111] RPC: Registered named UNIX socket transport module.
  115. [ 0.488124] RPC: Registered udp transport module.
  116. [ 0.488132] RPC: Registered tcp transport module.
  117. [ 0.488140] RPC: Registered tcp NFSv4.1 backchannel transport module.
  118. [ 0.488155] PCI: CLS 0 bytes, default 64
  119. [ 0.489158] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  120. [ 0.489286] kvm [1]: IPA Size Limit: 44 bits
  121. [ 0.489770] kvm [1]: vgic interrupt IRQ9
  122. [ 0.489897] kvm [1]: Hyp mode initialized successfully
  123. [ 0.490824] Initialise system trusted keyrings
  124. [ 0.490988] workingset: timestamp_bits=46 max_order=21 bucket_order=0
  125. [ 0.493681] zbud: loaded
  126. [ 0.494415] FS-Cache: Netfs 'nfs' registered for caching
  127. [ 0.494743] NFS: Registering the id_resolver key type
  128. [ 0.494765] Key type id_resolver registered
  129. [ 0.494774] Key type id_legacy registered
  130. [ 0.494823] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  131. [ 0.494833] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  132. [ 0.495372] Key type asymmetric registered
  133. [ 0.495383] Asymmetric key parser 'x509' registered
  134. [ 0.495409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  135. [ 0.495528] io scheduler mq-deadline registered
  136. [ 0.495539] io scheduler kyber registered
  137. [ 0.497204] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  138. [ 0.497224] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  139. [ 0.497257] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  140. [ 0.497294] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  141. [ 0.561250] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  142. [ 0.561417] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  143. [ 0.561430] pci_bus 0000:00: root bus resource [bus 00-ff]
  144. [ 0.561442] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  145. [ 0.561488] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  146. [ 0.561598] pci 0000:00:00.0: PME# supported from D0 D3hot
  147. [ 0.563016] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  148. [ 0.563260] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  149. [ 0.563352] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  150. [ 0.563631] pci 0000:01:00.0: PME# supported from D0 D3hot
  151. [ 0.576434] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  152. [ 0.576460] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  153. [ 0.576474] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  154. [ 0.576498] pci 0000:00:00.0: PCI bridge to [bus 01]
  155. [ 0.576511] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  156. [ 0.576805] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
  157. [ 0.576823] bcm2708_fb: probe of soc:fb failed with error -2
  158. [ 0.578767] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  159. [ 0.579876] iproc-rng200 fe104000.rng: hwrng registered
  160. [ 0.580016] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  161. [ 0.580533] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  162. [ 0.580698] cacheinfo: Unable to detect cache hierarchy for CPU 0
  163. [ 0.585430] brd: module loaded
  164. [ 0.591329] loop: module loaded
  165. [ 0.592122] Loading iSCSI transport class v2.0-870.
  166. [ 0.593488] libphy: Fixed MDIO Bus: probed
  167. [ 0.594132] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  168. [ 0.603220] libphy: bcmgenet MII bus: probed
  169. [ 0.655247] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  170. [ 0.655765] usbcore: registered new interface driver r8152
  171. [ 0.655800] usbcore: registered new interface driver lan78xx
  172. [ 0.655827] usbcore: registered new interface driver smsc95xx
  173. [ 0.701400] pci 0000:00:00.0: enabling device (0000 -> 0002)
  174. [ 0.701518] xhci_hcd 0000:01:00.0: xHCI Host Controller
  175. [ 0.701538] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  176. [ 0.701911] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  177. [ 0.702469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  178. [ 0.702482] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  179. [ 0.702493] usb usb1: Product: xHCI Host Controller
  180. [ 0.702502] usb usb1: Manufacturer: Linux 5.10.79-v8+ xhci-hcd
  181. [ 0.702511] usb usb1: SerialNumber: 0000:01:00.0
  182. [ 0.702825] hub 1-0:1.0: USB hub found
  183. [ 0.702885] hub 1-0:1.0: 1 port detected
  184. [ 0.703247] xhci_hcd 0000:01:00.0: xHCI Host Controller
  185. [ 0.703262] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  186. [ 0.703277] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  187. [ 0.703487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  188. [ 0.703500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  189. [ 0.703510] usb usb2: Product: xHCI Host Controller
  190. [ 0.703519] usb usb2: Manufacturer: Linux 5.10.79-v8+ xhci-hcd
  191. [ 0.703528] usb usb2: SerialNumber: 0000:01:00.0
  192. [ 0.703791] hub 2-0:1.0: USB hub found
  193. [ 0.703824] hub 2-0:1.0: 4 ports detected
  194. [ 0.704433] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  195. [ 0.704788] usbcore: registered new interface driver uas
  196. [ 0.704832] usbcore: registered new interface driver usb-storage
  197. [ 0.704927] mousedev: PS/2 mouse device common for all mice
  198. [ 0.705723] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  199. [ 0.707036] sdhci: Secure Digital Host Controller Interface driver
  200. [ 0.707049] sdhci: Copyright(c) Pierre Ossman
  201. [ 0.707357] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  202. [ 0.707568] sdhci-pltfm: SDHCI platform and OF driver helper
  203. [ 0.709924] ledtrig-cpu: registered to indicate activity on CPUs
  204. [ 0.710063] hid: raw HID events driver (C) Jiri Kosina
  205. [ 0.710144] usbcore: registered new interface driver usbhid
  206. [ 0.710153] usbhid: USB HID core driver
  207. [ 0.710300] ashmem: initialized
  208. [ 0.713913] Initializing XFRM netlink socket
  209. [ 0.713943] NET: Registered protocol family 17
  210. [ 0.714005] Key type dns_resolver registered
  211. [ 0.714225] registered taskstats version 1
  212. [ 0.714245] Loading compiled-in X.509 certificates
  213. [ 0.714475] Key type ._fscrypt registered
  214. [ 0.714485] Key type .fscrypt registered
  215. [ 0.714493] Key type fscrypt-provisioning registered
  216. [ 0.719379] uart-pl011 fe201000.serial: there is not valid maps for state default
  217. [ 0.719504] uart-pl011 fe201000.serial: cts_event_workaround enabled
  218. [ 0.719566] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
  219. [ 2.020691] printk: console [ttyAMA0] enabled
  220. [ 2.032815] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  221. [ 2.041029] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  222. [ 2.047070] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  223. [ 2.082969] of_cfs_init
  224. [ 2.085614] of_cfs_init: OK
  225. [ 2.104685] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  226. [ 2.111859] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  227. [ 2.117406] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  228. [ 2.125759] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6
  229. [ 2.126286] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  230. [ 2.133567] Please append a correct "root=" boot option; here are the available partitions:
  231. [ 2.142434] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  232. [ 2.147516] 0100 4096 ram0
  233. [ 2.153030] (driver?)
  234. [ 2.155306] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  235. [ 2.156821] 0101 4096 ram1
  236. [ 2.164705] (driver?)
  237. [ 2.170852] 0102 4096 ram2
  238. [ 2.170861] (driver?)
  239. [ 2.176999] 0103 4096 ram3
  240. [ 2.177008] (driver?)
  241. [ 2.183135] 0104 4096 ram4
  242. [ 2.183144] (driver?)
  243. [ 2.189294] 0105 4096 ram5
  244. [ 2.189302] (driver?)
  245. [ 2.195438] 0106 4096 ram6
  246. [ 2.195447] (driver?)
  247. [ 2.201577] 0107 4096 ram7
  248. [ 2.201585] (driver?)
  249. [ 2.207724] 0108 4096 ram8
  250. [ 2.207732] (driver?)
  251. [ 2.213861] 0109 4096 ram9
  252. [ 2.213870] (driver?)
  253. [ 2.220005] 010a 4096 ram10
  254. [ 2.220013] (driver?)
  255. [ 2.226226] 010b 4096 ram11
  256. [ 2.226235] (driver?)
  257. [ 2.232143] mmc1: new high speed SDIO card at address 0001
  258. [ 2.232460] 010c 4096 ram12
  259. [ 2.237944] (driver?)
  260. [ 2.244170] 010d 4096 ram13
  261. [ 2.244179] (driver?)
  262. [ 2.250393] 010e 4096 ram14
  263. [ 2.250401] (driver?)
  264. [ 2.256626] 010f 4096 ram15
  265. [ 2.256635] (driver?)
  266. [ 2.262866] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  267. [ 2.264141] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
  268. [ 2.271141] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.79-v8+ #1
  269. [ 2.271150] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
  270. [ 2.278567] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  271. [ 2.284030] Call trace:
  272. [ 2.284052] dump_backtrace+0x0/0x1c0
  273. [ 2.284062] show_stack+0x24/0x30
  274. [ 2.284074] dump_stack+0xec/0x154
  275. [ 2.284085] panic+0x188/0x388
  276. [ 2.289957] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  277. [ 2.294277] mount_block_root+0x1d4/0x264
  278. [ 2.294289] mount_root+0x110/0x144
  279. [ 2.302076] mmcblk0: p1 p2 p3
  280. [ 2.303704] prepare_namespace+0x13c/0x17c
  281. [ 2.303713] kernel_init_freeable+0x2a0/0x2e4
  282. [ 2.303722] kernel_init+0x20/0x130
  283. [ 2.303731] ret_from_fork+0x10/0x38
  284. [ 2.303740] SMP: stopping secondary CPUs
  285. [ 2.346676] Kernel Offset: disabled
  286. [ 2.350168] CPU features: 0x0240022,61002000
  287. [ 2.354439] Memory Limit: none
  288. [ 2.357510] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
  289.  
  290.  
  291.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!