API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 23rd, 2017
81
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 6.38 KB | None | 0 0
raw download clone embed print report
  1. Uncompressing Linux... done, booting the kernel.
  2. Linux version 2.6.36 (kelly@speedy) (gcc version 4.4.3 (Sourcery G++ Lite er) )
  3. #1 PREEMPT Mon Oct 25 01:36:25 MDT 2010
  4. CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
  5. CPU: VIVT data cache, VIVT instruction cache
  6. Machine: Marvell SheevaPlug Reference Board
  7. Memory policy: ECC disabled, Data cache writeback
  8. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
  9. Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0
  10. x1ff00000@0x100000(root) root=/dev/nfs rw nfsroot=10.4.50.5:/mnt/ARM_FS/ ip=10.4
  11. .50.165:10.4.50.5:::DB88FXX81:eth0:none mv_net_config=(00:11:88:0f:62:81,0:1:2:3
  12. ),mtu=1500 mv_phone_config=dev0:fxs,dev1:fxs
  13. PID hash table entries: 2048 (order: 1, 8192 bytes)
  14. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  15. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. Memory: 256MB 256MB = 512MB total
  17. Memory: 513144k/513144k available, 11144k reserved, 0K highmem
  18. Virtual kernel memory layout:
  19.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  20.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  21.     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  22.     vmalloc : 0xe0800000 - 0xfe800000   ( 480 MB)
  23.     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  24.     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  25.       .init : 0xc0008000 - 0xc002e000   ( 152 kB)
  26.       .text : 0xc002e000 - 0xc055d000   (5308 kB)
  27.       .data : 0xc0582000 - 0xc05b1840   ( 191 kB)
  28. SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  29. Hierarchical RCU implementation.
  30.         RCU-based detection of stalled CPUs is disabled.
  31.         Verbose stalled-CPUs detection is disabled.
  32. NR_IRQS:114
  33. Console: colour dummy device 80x30
  34. Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
  35. pid_max: default: 32768 minimum: 301
  36. Mount-cache hash table entries: 512
  37. CPU: Testing write buffer coherency: ok
  38. NET: Registered protocol family 16
  39. Kirkwood: MV88F6281-A0, TCLK=200000000.
  40. Feroceon L2: Enabling L2
  41. Feroceon L2: Cache support initialised.
  42. bio: create slab <bio-0> at 0
  43. vgaarb: loaded
  44. SCSI subsystem initialized
  45. usbcore: registered new interface driver usbfs
  46. usbcore: registered new interface driver hub
  47. usbcore: registered new device driver usb
  48. cfg80211: Calling CRDA to update world regulatory domain
  49. Switching to clocksource orion_clocksource
  50. NET: Registered protocol family 2
  51. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  52. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  53. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  54. TCP: Hash tables configured (established 16384 bind 16384)
  55. TCP reno registered
  56. UDP hash table entries: 256 (order: 0, 4096 bytes)
  57. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  58. NET: Registered protocol family 1
  59. RPC: Registered udp transport module.
  60. RPC: Registered tcp transport module.
  61. RPC: Registered tcp NFSv4.1 backchannel transport module.
  62. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  63. JFS: nTxBlock = 4008, nTxLock = 32071
  64. msgmni has been set to 1002
  65. io scheduler noop registered
  66. io scheduler deadline registered
  67. io scheduler cfq registered (default)
  68. Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  69. serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
  70. console [ttyS0] enabled
  71. brd: module loaded
  72. loop: module loaded
  73. NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
  74.  
  75. Scanning device for bad blocks
  76. Creating 3 MTD partitions on "orion_nand":
  77. 0x000000000000-0x000000100000 : "u-boot"
  78. 0x000000100000-0x000000500000 : "uImage"
  79. 0x000000500000-0x000020000000 : "root"
  80. MV-643xx 10/100/1000 ethernet driver version 1.4
  81. mv643xx_eth smi: probed
  82. net eth0: port 0 with MAC address 00:50:43:00:02:35
  83. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  84. orion-ehci orion-ehci.0: Marvell Orion EHCI
  85. orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
  86. orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
  87. orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
  88. hub 1-0:1.0: USB hub found
  89. hub 1-0:1.0: 1 port detected
  90. Initializing USB Mass Storage driver...
  91. usbcore: registered new interface driver usb-storage
  92. USB Mass Storage support registered.
  93. usbcore: registered new interface driver ums-datafab
  94. usbcore: registered new interface driver ums-freecom
  95. usbcore: registered new interface driver ums-jumpshot
  96. usbcore: registered new interface driver ums-sddr09
  97. usbcore: registered new interface driver ums-sddr55
  98. mice: PS/2 mouse device common for all mice
  99. rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
  100. i2c /dev entries driver
  101. cpuidle: using governor ladder
  102. cpuidle: using governor menu
  103. sdhci: Secure Digital Host Controller Interface driver
  104. sdhci: Copyright(c) Pierre Ossman
  105. mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
  106. mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
  107. mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
  108. mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
  109. mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
  110. mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
  111. mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
  112. usbcore: registered new interface driver hiddev
  113. usbcore: registered new interface driver usbhid
  114. usbhid: USB HID core driver
  115. oprofile: hardware counters not available
  116. oprofile: using timer interrupt.
  117. TCP cubic registered
  118. NET: Registered protocol family 17
  119. lib80211: common routines for IEEE802.11 drivers
  120. Registering the dns_resolver key type
  121. registered taskstats version 1
  122. rtc-mv rtc-mv: setting system clock to 2010-10-28 11:03:02 UTC (1288263782)
  123. usb 1-1: new high speed USB device using orion-ehci and address 2
  124. scsi0 : usb-storage 1-1:1.0
  125. scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
  126. sd 0:0:0:0: Attached scsi generic sg0 type 0
  127. sd 0:0:0:0: [sda] 15646656 512-byte logical blocks: (8.01 GB/7.45 GiB)
  128. sd 0:0:0:0: [sda] Write Protect is off
  129. sd 0:0:0:0: [sda] Assuming drive cache: write through
  130. sd 0:0:0:0: [sda] Assuming drive cache: write through
  131.  sda: sda1
  132. sd 0:0:0:0: [sda] Assuming drive cache: write through
  133. sd 0:0:0:0: [sda] Attached SCSI removable disk
  134. IP-Config: Guessing netmask 255.0.0.0
  135. IP-Config: Complete:
  136.      device=eth0, addr=10.4.50.165, mask=255.0.0.0, gw=255.255.255.255,
  137.      host=DB88FXX81, domain=, nis-domain=(none),
  138.      bootserver=10.4.50.5, rootserver=10.4.50.5, rootpath=
  139. Looking up port of RPC 100003/2 on 10.4.50.5
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!