>
>
>
>
>
>
>
U-Boot SPL 2021.10-gc2b239f7 (Dec 17 2021 - 16:57:21 +0000)
Trying to boot from MMC2


U-Boot 2021.10-gc2b239f7 (Dec 17 2021 - 16:57:21 +0000)

CPU  : AM335X-GP rev 2.1
Model: TI AM335x BeagleBone Black
DRAM:  512 MiB
Reset Source: Global external warm reset has occurred.
Reset Source: Power-on reset has occurred.
RTC 32KCLK Source: External.
WDT:   Started with servicing (60s timeout)
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **

** Unable to read "/boot/uboot.env" from mmc0:1 **
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
Model: BeagleBone Black Industrial:
BeagleBone Cape EEPROM: no EEPROM at address: 0x54
BeagleBone Cape EEPROM: no EEPROM at address: 0x55
BeagleBone Cape EEPROM: no EEPROM at address: 0x56
BeagleBone Cape EEPROM: no EEPROM at address: 0x57
Net:   eth2: ethernet@4a100000, eth3: usb_ether
Press SPACE to abort autoboot in 0 seconds
board_name=[A335BNLT] ...
board_rev=[EIA0] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Couldn't find partition 0:2 0x82000000
Can't set block device
Couldn't find partition 0:2 0x82000000
Can't set block device
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Scanning disk mmc@48060000.blk...
Scanning disk mmc@481d8000.blk...
Found 4 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
switch to partitions #0, OK
mmc0 is current device
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
2072 bytes read in 3 ms (673.8 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
Running uname_boot ...
loading /boot/vmlinuz-4.19.94-ti-r42 ...
10095592 bytes read in 638 ms (15.1 MiB/s)
debug: [enable_uboot_overlays=1] ...
debug: [enable_uboot_cape_universal=] ...
debug: [uboot_base_dtb_univ=am335x-boneblack-uboot.dtb] ...
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.19.94-ti-r42/am335x-boneblack-uboot.dtb ...
57419 bytes read in 8 ms (6.8 MiB/s)
Found 0 extension board(s).
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
654 bytes read in 5 ms (127 KiB/s)
uboot_overlays: loading /lib/firmware/shutter_steppers.dtbo ...
1471 bytes read in 26 ms (54.7 KiB/s)
failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND
uboot_overlays: loading /lib/firmware/pru-pins.dtbo ...
2138 bytes read in 15 ms (138.7 KiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC
base fdt does did not have a /__symbols__ node
make sure you've compiled with -@
uboot_overlays: uboot loading of [BB-BONE-eMMC1-01-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_emmc=1]...
uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]...
uboot_overlays: loading /lib/firmware/uio-pruss.dtbo ...
652 bytes read in 26 ms (24.4 KiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC
base fdt does did not have a /__symbols__ node
make sure you've compiled with -@
loading /boot/initrd.img-4.19.94-ti-r42 ...
7050694 bytes read in 452 ms (14.9 MiB/s)
debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ...
debug: [bootz 0x82000000 0x88080000:6b95c6 88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x9a0be8 ]
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
** Invalid partition 2 **
Couldn't find partition mmc 0:2
** Invalid partition 3 **
Couldn't find partition mmc 0:3
** Invalid partition 4 **
Couldn't find partition mmc 0:4
** Invalid partition 5 **
Couldn't find partition mmc 0:5
** Invalid partition 6 **
Couldn't find partition mmc 0:6
** Invalid partition 7 **
Couldn't find partition mmc 0:7
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
BootOrder not defined
EFI boot manager: Cannot load any image
switch to partitions #0, OK
mmc1(part 0) is current device
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
1713 bytes read in 2 ms (835.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
Running uname_boot ...
loading /boot/vmlinuz-5.10.106-ti-r41 ...
10355200 bytes read in 663 ms (14.9 MiB/s)
debug: [enable_uboot_overlays=1] ...
debug: [enable_uboot_cape_universal=1] ...
debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ...
loading /boot/dtbs/5.10.106-ti-r41/am335x-boneblack-uboot-univ.dtb ...
215402 bytes read in 17 ms (12.1 MiB/s)
Found 0 extension board(s).
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /boot/dtbs/5.10.106-ti-r41/overlays/BB-ADC-00A0.dtbo ...
645 bytes read in 4 ms (157.2 KiB/s)
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/shutter_steppers.dtbo]...
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/pru-pins.dtbo]...
uboot_overlays: uboot loading of [BB-BONE-eMMC1-01-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_emmc=1]...
uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]...
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/uio-pruss.dtbo]...
loading /boot/initrd.img-5.10.106-ti-r41 ...
7484893 bytes read in 480 ms (14.9 MiB/s)
debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ...
debug: [bootz 0x82000000 0x88080000:7235dd 88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x9e0200 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f8dc000, end 8ffff5dd ... OK
   Loading Device Tree to 8f844000, end 8f8dbfff ... OK

Starting kernel ...

[    0.149103] l3-aon-clkctrl:0000:0: failed to disable
[   11.243220] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!
[   11.275634] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P8_03'
[   11.275667] gpio-of-helper ocp:cape-universal: Failed to create gpio entry
[   11.888730] omap_voltage_late_init: Voltage driver support not added
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!


BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) >

U-sh: syntax error: unexpected newline
Bo(initramfs) >
sh: syntax error: unexpected newline
(initramfs) >
sh: syntax error: unexpected newline
(initramfs) U-Boot SPL 2021.10-gc2b239f7 (Dec 17 2021 - 16:57:21 +0000)
sh: syntax error: unexpected "("
(initramfs) Trying to boot from MMC2
sh: Trying: not found
(initramfs)
(initramfs)
(initramfs) U-Boot 2021.10-gc2b239f7 (Dec 17 2021 - 16:57:21 +0000)
sh: syntax error: unexpected "("
(initramfs)
(initramfs) CPU  : AM335X-GP rev 2.1
sh: CPU: not found
(initramfs) Model: TI AM335x BeagleBone Black
sh: Model:: not found
(initramfs) DRAM:  512 MiB
sh: DRAM:: not found
(initramfs) Reset Source: Global external warm reset has occurred.
sh: Reset: not found
(initramfs) Reset Source: Power-on reset has occurred.
sh: Reset: not found
(initramfs) RTC 32KCLK Source: External.
sh: RTC: not found
(initramfs) WDT:   Started with servicing (60s timeout)
sh: syntax error: unexpected "("
(initramfs) MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
sh: MMC:: not found
(initramfs) Loading Environment from EXT4... ** File not found /boot/uboot.env *
*
sh: Loading: not found
(initramfs)
(initramfs) ** Unable to read "/boot/uboot.env" from mmc0:1 **
sh: bin: not found
(initramfs) Board: BeagleBone Black
sh: Board:: not found
(initramfs) <ethaddr> not set. Validating first E-fuse MAC
sh: can't open ethaddr: no such file
sh: set.: not found
(initramfs) BeagleBone Black:
sh: BeagleBone: not found
(initramfs) Model: BeagleBone Black Industrial:
sh: Model:: not found
gleBone Cape EEPR(initramfs) BeagleBone Cape EEPROM: no EEPROM at address: 0x54
sh: BeagleBone: not found
(initramfs) BeagleBone Cape EEPROM: no EEPROM at address: 0x55
sh: BeagleBone: not found
(initramfs) BeagleBone Cape EEPROM: no EEPROM at address: 0x56
sh: BeagleBone: not found
(initramfs) BeagleBone Cape EEPROM: no EEPROM at address: 0x57
sh: BeagleBone: not found
(initramfs) Net:   eth2: ethernet@4a100000, eth3: usb_ether
sh: Net:: not found
(initramfs) Press SPACE to abort autoboot in 0 seconds
sh: Press: not found
(initramfs) board_name=[A335BNLT] ...
sh: ...: not found
(initramfs) board_rev=[EIA0] ...
sh: ...: not found
(initramfs) switch to partitions #0, OK
sh: switch: not found
(initramfs) mmc0 is current device
SD/MMC found on dsh: mmc0: not found
(initramfs) SD/MMC found on device 0
an't set block desh: SD/MMC: not found
(initramfs) Couldn't find partition 0:2 0x82000000
> Can't set block device
sh: Couldnt find partition 0:2 0x82000000
Cant: not found
(initramfs) Couldn't find partition 0:2 0x82000000
> Can't set block device
sh: Couldnt find partition 0:2 0x82000000
Cant: not found
(initramfs) switch to partitions #0, OK
sh: vice
Scanning mmcswitch: not found
(initramfs) mmc0 is current device
sh: mmc0: not found
(initramfs) Scanning mmc 0:1...
sh: Scanning: not found
(initramfs) Scanning disk mmc@48060000.blk...
sh: Scanning: not found
ng disk mmc@481d8(initramfs) Scanning disk mmc@481d8000.blk...
sh: Scanning: not found
(initramfs) Found 4 disks
sh: Found: not found
(initramfs) No EFI system partition
sh: No: not found
(initramfs) BootOrder not defined
sh: BootOrder: not found
(initramfs) EFI boot manager: Cannot load any image
itch to partitionsh: EFI: not found
(initramfs) switch to partitions #0, OK
sh: switch: not found
(initramfs) mmc0 is current device
sh: mmc0: not found
(initramfs) Checking for: /uEnv.txt ...
sh: Checking: not found
(initramfs) Checking for: /boot/uEnv.txt ...
sh: Checking: not found
(initramfs) 2072 bytes read in 3 ms (673.8 KiB/s)
sh: syntax error: unexpected "("
(initramfs) Loaded environment from /boot/uEnv.txt
sh: Loaded: not found
(initramfs) Checking if uname_r is set in /boot/uEnv.txt...
sh: Checking: not found
(initramfs) Running uname_boot ...
sh: Running: not found
oading /boot/vmli(initramfs) loading /boot/vmlinuz-4.19.94-ti-r42 ...
sh: loading: not found
(initramfs) 10095592 bytes read in 638 ms (15.1 MiB/s)
sh: syntax error: unexpected "("
(initramfs) debug: [enable_uboot_overlays=1] ...
sh: debug:: not found
able_uboot_cape_u(initramfs) debug: [enable_uboot_cape_universal=] ...
sh: debug:: not found
(initramfs) debug: [uboot_base_dtb_univ=am335x-boneblack-uboot.dtb] ...
sh: debug:: not found
(initramfs) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
sh: uboot_overlays:: not found
(initramfs) loading /boot/dtbs/4.19.94-ti-r42/am335x-boneblack-uboot.dtb ...
sh: loading: not found
(initramfs) 57419 bytes read in 8 ms (6.8 MiB/s)
sh: syntax error: unexpected "("
ound 0 extension (initramfs) Found 0 extension board(s).
sh: syntax error: unexpected "("
(initramfs) uboot_overlays: [fdt_buffer=0x60000] ...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
sh: uboot_overlays:: not found
(initramfs) 654 bytes read in 5 ms (127 KiB/s)
sh: syntax error: unexpected "("
(initramfs) uboot_overlays: loading /lib/firmware/shutter_steppers.dtbo ...
sh: uboot_overlays:: not found
(initramfs) 1471 bytes read in 26 ms (54.7 KiB/s)
sh: syntax error: unexpected "("
(initramfs) failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND
sh: syntax error: unexpected "("
(initramfs) uboot_overlays: loading /lib/firmware/pru-pins.dtbo ...
sh: uboot_overlays:: not found
(initramfs) 2138 bytes read in 15 ms (138.7 KiB/s)
sh: syntax error: unexpected "("
(initramfs) libfdt fdt_check_header(): FDT_ERR_BADMAGIC
sh: syntax error: unexpected "("
(initramfs) failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC
sh: syntax error: unexpected "("
(initramfs) base fdt does did not have a /__symbols__ node
sh: base: not found
(initramfs) make sure you've compiled with -@
> uboot_overlays: uboot loading of [BB-BONE-eMMC1-01-00A0.dtbo] disabled by /boo
t/uEnv.txt [disable_uboot_overlay_emmc=1]...
> uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot
/uEnv.txt [disable_uboot_overlay_video=1]...
> uboot_overlays: loading /lib/firmware/uio-pruss.dtbo ...
> 652 bytes read in 26 ms (24.4 KiB/s)
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC
> base fdt does did not have a /__symbols__ node
> make sure you've compiled with -@
sh: make: not found
(initramfs) loading /boot/initrd.img-4.19.94-ti-r42 ...
sh: loading: not found
(initramfs) 7050694 bytes read in 452 ms (14.9 MiB/s)
sh: syntax error: unexpected "("
(initramfs) debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext
4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=1
00 quiet] ...
sh: debug:: not found
(initramfs) debug: [bootz 0x82000000 0x88080000:6b95c6 88000000] ...
sh: debug:: not found
(initramfs) Kernel image @ 0x82000000 [ 0x000000 - 0x9a0be8 ]
sh: Kernel: not found
(initramfs) ERROR: Did not find a cmdline Flattened Device Tree
sh: ERROR:: not found
(initramfs) Could not find a valid device tree
sh: Could: not found
(initramfs) ** Invalid partition 2 **
sh: bin: not found
(initramfs) Couldn't find partition mmc 0:2
> ** Invalid partition 3 **
> Couldn't find partition mmc 0:3
sh: Couldnt find partition mmc 0:2
** Invalid partition 3 **
Couldnt: not found
(initramfs) ** Invalid partition 4 **
ind partition mmsh: bin: not found
(initramfs) Couldn't find partition mmc 0:4
> ** Invalid partition 5 **
> Couldn't find partition mmc 0:5
sh: Couldnt find partition mmc 0:4
** Invalid partition 5 **
Couldnt: not found
(initramfs) ** Invalid partition 6 **
sh: bin: not found
(initramfs) Couldn't find partition mmc 0:6
> ** Invalid partition 7 **
> Couldn't find partition mmc 0:7
sh: Couldnt find partition mmc 0:6
** Invalid partition 7 **
Couldnt: not found
(initramfs) switch to partitions #0, OK
sh: switch: not found
(initramfs) mmc1(part 0) is current device
sh: syntax error: unexpected word (expecting ")")
(initramfs) Scanning mmc 1:1...
sh: Scanning: not found
(initramfs) libfdt fdt_check_header(): FDT_ERR_BADMAGIC
sh: syntax error: unexpected "(rder not defined
EFI boot manager: Cannot load any image
switch to partitions #0, OK
mmc1(part 0) is current device
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
1713 bytes read in 2 ms (835.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
Running uname_boot ...
loading /boot/vmlinuz-5.10.106-ti-r41 ...
10355200 bytes read in 663 ms (14.9 MiB/s)
debug: [enable_uboot_overlays=1] ...
debug: [enable_uboot_cape_universal=1] ...
debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ...
loading /boot/dtbs/5.10.106-ti-r41/am335x-boneblack-uboot-univ.dtb ...
215402 bytes read in 17 ms (12.1 MiB/s)
Found 0 extension board(s).
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /boot/dtbs/5.10.106-ti-r41/overlays/BB-ADC-00A0.dtbo ...
645 bytes read in 4 ms (157.2 KiB/s)
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/shutter_steppers.dtbo]...
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/pru-pins.dtbo]...
uboot_overlays: uboot loading of [BB-BONE-eMMC1-01-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_emmc=1]...
uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]...
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/uio-pruss.dtbo]...
loading /boot/initrd.img-5.10.106-ti-r41 ...
7484893 bytes read in 480 ms (14.9 MiB/s)
debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ...
debug: [bootz 0x82000000 0x88080000:7235dd 88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x9e0200 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f8dc000, end 8ffff5dd ... OK
   Loading Device Tree to 8f844000, end 8f8dbfff ... OK

Starting kernel ...

[    0.149103] l3-aon-clkctrl:0000:0: failed to disable
[   11.243220] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!
[   11.275634] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P8_03'
[   11.275667] gpio-of-helper ocp:cape-universal: Failed to create gpio entry
[   11.888730] omap_voltage_late_init: Voltage driver support not added
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!


BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs)
"
(initramfs) BootOrder not defined
sh: BootOrder: not found
(initramfs) EFI boot manager: Cannot load any image
sh: EFI: not found
(initramfs) switch to partitions #0, OK
sh: switch: not found
(initramfs) mmc1(part 0) is current device
sh: syntax error: unexpected word (expecting ")")
(initramfs) Checking for: /uEnv.txt ...
sh: Checking: not found
(initramfs) Checking for: /boot/uEnv.txt ...
sh: Checking: not found
(initramfs) 1713 bytes read in 2 ms (835.9 KiB/s)
sh: syntax error: unexpected "("
(initramfs) Loaded environment from /boot/uEnv.txt
sh: Loaded: not found
(initramfs) Checking if uname_r is set in /boot/uEnv.txt...
sh: Checking: not found
(initramfs) Running uname_boot ...
sh: Running: not found
(initramfs) loading /boot/vmlinuz-5.10.106-ti-r41 ...
sh: loading: not found
(initramfs) 10355200 bytes read in 663 ms (14.9 MiB/s)
sh: syntax error: unexpected "("
(initramfs) debug: [enable_uboot_overlays=1] ...
sh: debug:: not found
(initramfs) debug: [enable_uboot_cape_universal=1] ...
sh: debug:: not found
(initramfs) debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
sh: debug:: not found
(initramfs) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb .
..
sh: uboot_overlays:: not found
(initramfs) loading /boot/dtbs/5.10.106-ti-r41/am335x-boneblack-uboot-univ.dtb .
..
sh: loading: not found
(initramfs) 215402 bytes read in 17 ms (12.1 MiB/s)
sh: syntax error: unexpected "("
(initramfs) Found 0 extension board(s).
sh: syntax error: unexpected "("
(initramfs) uboot_overlays: [fdt_buffer=0x60000] ...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: loading /boot/dtbs/5.10.106-ti-r41/overlays/BB-ADC-0
0A0.dtbo ...
sh: uboot_overlays:: not found
(initramfs) 645 bytes read in 4 ms (157.2 KiB/s)
sh: syntax error: unexpected "("
(initramfs) uboot_overlays: unable to find [mmc 1:1 /lib/firmware/shutter_steppe
rs.dtbo]...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: unable to find [mmc 1:1 /lib/firmware/pru-pins.dtbo]
...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: uboot loading of [BB-BONE-eMMC1-01-00A0.dtbo] disabl
ed by /boot/uEnv.txt [disable_uboot_overlay_emmc=1]...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disable
d by /boot/uEnv.txt [disable_uboot_overlay_video=1]...
sh: uboot_overlays:: not found
(initramfs) uboot_overlays: unable to find [mmc 1:1 /lib/firmware/uio-pruss.dtbo
]...
sh: uboot_overlays:: not found
(initramfs) loading /boot/initrd.img-5.10.106-ti-r41 ...
sh: loading: not found
(initramfs) 7484893 bytes read in 480 ms (14.9 MiB/s)
sh: syntax error: unexpected "("
(initramfs) debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 l
pj=1990656 rng_core.default_quality=100 quiet] ...
sh: debug:: not found
(initramfs) debug: [bootz 0x82000000 0x88080000:7235dd 88000000] ...
sh: debug:: not found
(initramfs) Kernel image @ 0x82000000 [ 0x000000 - 0x9e0200 ]
sh: Kernel: not found
(initramfs) ## Flattened Device Tree blob at 88000000
(initramfs)    Booting using the fdt blob at 0x88000000
sh: Booting: not found
(initramfs)    Loading Ramdisk to 8f8dc000, end 8ffff5dd ... OK
sh: Loading: not found
(initramfs)    Loading Device Tree to 8f844000, end 8f8dbfff ... OK
sh: Loading: not found
(initramfs)
(initramfs) Starting kernel ...
sh: Starting: not found
(initramfs)
(initramfs) [    0.149103] l3-aon-clkctrl:0000:0: failed to disable
sh: missing ]
(initramfs) [   11.243220] debugfs: Directory '49000000.dma' with parent 'dmaeng
ine' already present!
sh: missing ]
(initramfs) [   11.275634] gpio-of-helper ocp:cape-universal: Failed to get gpio
 property of 'P8_03'
sh: missing ]
(initramfs) [   11.275667] gpio-of-helper ocp:cape-universal: Failed to create g
pio entry
sh: missing ]
(initramfs) [   11.888730] omap_voltage_late_init: Voltage driver support not ad
ded
sh: missing ]
(initramfs) Gave up waiting for root file system device.  Common problems:
sh: Gave: not found
(initramfs)  - Boot args (cat /proc/cmdline)
sh: syntax error: unexpected "("
(initramfs)    - Check rootdelay= (did the system wait long enough?)
sh: syntax error: unexpected "("
(initramfs)  - Missing modules (cat /proc/modules; ls /dev)
sh: syntax error: unexpected "("
(initramfs) ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!
sh: ALERT!: not found
(initramfs)
(initramfs)
(initramfs) BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
sh: syntax error: unexpected "("
(initramfs) Enter 'help' for a list of built-in commands.
sh: Enter: not found
(initramfs)
(initramfs) (initramfs)
sh: initramfs: not found
(initramfs) e