Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 1641.653890] PM: Syncing filesystems ... done.
- [ 1641.691573] PM: Preparing system for mem sleep
- [ 1641.691754] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 1641.693427] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 1641.694562] PM: Entering mem sleep
- [ 1641.694619] Suspending console(s) (use no_console_suspend to debug)
- [ 1641.694732] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 1641.704743] cfg80211: Calling CRDA to update world regulatory domain
- [ 1641.704841] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 1641.705567] sd 1:0:0:0: [sda] Stopping disk
- [ 1642.039272] PM: suspend of devices complete after 344.269 msecs
- [ 1642.054181] PM: late suspend of devices complete after 14.894 msecs
- [ 1642.054642] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 1642.054799] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 1642.070513] PM: noirq suspend of devices complete after 16.316 msecs
- [ 1642.070805] ACPI: Preparing to enter system sleep state S3
- [ 1642.071105] PM: Saving platform NVS memory
- [ 1642.071714] Disabling non-boot CPUs ...
- [ 1642.071745] intel_pstate CPU 1 exiting
- [ 1642.072968] kvm: disabling virtualization on CPU1
- [ 1642.174220] smpboot: CPU 1 is now offline
- [ 1642.174461] intel_pstate CPU 2 exiting
- [ 1642.175659] kvm: disabling virtualization on CPU2
- [ 1642.278306] smpboot: CPU 2 is now offline
- [ 1642.278521] intel_pstate CPU 3 exiting
- [ 1642.279692] kvm: disabling virtualization on CPU3
- [ 1642.382388] smpboot: CPU 3 is now offline
- [ 1642.385571] ACPI: Low-level resume complete
- [ 1642.385727] PM: Restoring platform NVS memory
- [ 1642.386617] Enabling non-boot CPUs ...
- [ 1642.386688] x86: Booting SMP configuration:
- [ 1642.386690] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 1642.399758] kvm: enabling virtualization on CPU1
- [ 1642.402049] Intel pstate controlling: cpu 1
- [ 1642.402119] CPU1 is up
- [ 1642.402149] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 1642.414663] kvm: enabling virtualization on CPU2
- [ 1642.416901] Intel pstate controlling: cpu 2
- [ 1642.416955] CPU2 is up
- [ 1642.416981] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 1642.429329] kvm: enabling virtualization on CPU3
- [ 1642.431577] Intel pstate controlling: cpu 3
- [ 1642.431619] CPU3 is up
- [ 1642.437345] ACPI: Waking up from system sleep state S3
- [ 1642.454669] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 1642.566469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 1642.566579] PM: noirq resume of devices complete after 124.693 msecs
- [ 1642.566925] PM: early resume of devices complete after 0.318 msecs
- [ 1642.567132] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
- [ 1642.569820] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
- [ 1642.570441] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 1642.570833] sd 1:0:0:0: [sda] Starting disk
- [ 1642.890689] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1642.891452] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1642.891668] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1642.897066] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1642.897276] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1642.897345] ata2.00: configured for UDMA/133
- [ 1642.938890] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1642.938901] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1642.938903] usb 2-8: hub failed to enable device, error -22
- [ 1643.050863] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1643.050873] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1643.050874] usb 2-8: hub failed to enable device, error -22
- [ 1643.162953] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1643.184810] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 1643.347320] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1643.347419] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1643.347435] usb 2-4: hub failed to enable device, error -22
- [ 1643.459351] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1643.459362] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1643.459363] usb 2-4: hub failed to enable device, error -22
- [ 1643.571344] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1643.588115] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 1643.588117] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 1643.588119] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 1643.588120] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 1643.588121] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 1643.699602] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1643.699701] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1643.699718] usb 2-6: hub failed to enable device, error -22
- [ 1643.811520] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1643.811619] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1643.811636] usb 2-6: hub failed to enable device, error -22
- [ 1643.923727] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1643.941192] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 1643.941194] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 1643.941198] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1643.941201] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1644.051894] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1644.051961] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1644.051963] usb 2-7: hub failed to enable device, error -22
- [ 1644.163922] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1644.163932] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1644.163933] usb 2-7: hub failed to enable device, error -22
- [ 1644.275964] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1644.292478] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 1644.292480] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 1644.292485] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1644.297784] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1644.298001] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1644.310946] PM: resume of devices complete after 1742.610 msecs
- [ 1644.311591] PM: Finishing wakeup.
- [ 1644.311593] Restarting tasks ...
- [ 1644.312027] pci_bus 0000:01: Allocating resources
- [ 1644.312048] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1644.318079] done.
- [ 1644.320593] pci_bus 0000:01: Allocating resources
- [ 1644.320617] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1644.324835] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 1644.324844] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 1644.342457] cfg80211: World regulatory domain updated:
- [ 1644.342463] cfg80211: DFS Master region: unset
- [ 1644.342465] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 1644.342470] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1644.342474] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1644.342477] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1644.342480] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1644.342484] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1644.443960] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 1644.479992] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 1645.135642] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 1645.137017] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 1645.141318] wlan0: authenticated
- [ 1645.144516] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 1645.146642] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 1645.148589] wlan0: associated
- [ 1650.449498] PM: Syncing filesystems ... done.
- [ 1650.496526] PM: Preparing system for mem sleep
- [ 1650.496652] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 1650.498363] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 1650.499486] PM: Entering mem sleep
- [ 1650.499544] Suspending console(s) (use no_console_suspend to debug)
- [ 1650.499657] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 1650.507528] cfg80211: Calling CRDA to update world regulatory domain
- [ 1650.507656] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 1650.508355] sd 1:0:0:0: [sda] Stopping disk
- [ 1650.859015] PM: suspend of devices complete after 359.074 msecs
- [ 1650.873199] PM: late suspend of devices complete after 14.169 msecs
- [ 1650.873622] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 1650.873728] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 1650.889529] PM: noirq suspend of devices complete after 16.314 msecs
- [ 1650.889821] ACPI: Preparing to enter system sleep state S3
- [ 1650.890116] PM: Saving platform NVS memory
- [ 1650.890717] Disabling non-boot CPUs ...
- [ 1650.890758] intel_pstate CPU 1 exiting
- [ 1650.891973] kvm: disabling virtualization on CPU1
- [ 1650.993224] smpboot: CPU 1 is now offline
- [ 1650.993458] intel_pstate CPU 2 exiting
- [ 1650.994654] kvm: disabling virtualization on CPU2
- [ 1651.097318] smpboot: CPU 2 is now offline
- [ 1651.097540] intel_pstate CPU 3 exiting
- [ 1651.098714] kvm: disabling virtualization on CPU3
- [ 1651.201387] smpboot: CPU 3 is now offline
- [ 1651.204571] ACPI: Low-level resume complete
- [ 1651.204662] PM: Restoring platform NVS memory
- [ 1651.205410] Enabling non-boot CPUs ...
- [ 1651.205483] x86: Booting SMP configuration:
- [ 1651.205485] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 1651.218628] kvm: enabling virtualization on CPU1
- [ 1651.220947] Intel pstate controlling: cpu 1
- [ 1651.221020] CPU1 is up
- [ 1651.221050] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 1651.233613] kvm: enabling virtualization on CPU2
- [ 1651.235873] Intel pstate controlling: cpu 2
- [ 1651.235924] CPU2 is up
- [ 1651.235947] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 1651.248289] kvm: enabling virtualization on CPU3
- [ 1651.250588] Intel pstate controlling: cpu 3
- [ 1651.250634] CPU3 is up
- [ 1651.256401] ACPI: Waking up from system sleep state S3
- [ 1651.273415] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 1651.381264] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 1651.381360] PM: noirq resume of devices complete after 121.382 msecs
- [ 1651.381711] PM: early resume of devices complete after 0.324 msecs
- [ 1651.381844] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
- [ 1651.382006] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
- [ 1651.382254] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 1651.397286] sd 1:0:0:0: [sda] Starting disk
- [ 1651.725531] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1651.726592] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1651.726915] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1651.732332] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1651.732825] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1651.732923] ata2.00: configured for UDMA/133
- [ 1651.749849] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1651.749861] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1651.749863] usb 2-4: hub failed to enable device, error -22
- [ 1651.861710] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1651.861809] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1651.861825] usb 2-4: hub failed to enable device, error -22
- [ 1651.973801] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1651.990575] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 1651.990577] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 1651.990579] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 1651.990580] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 1651.990581] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 1652.102039] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1652.102139] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1652.102155] usb 2-6: hub failed to enable device, error -22
- [ 1652.214099] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1652.214110] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1652.214111] usb 2-6: hub failed to enable device, error -22
- [ 1652.326075] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1652.343892] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 1652.343895] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 1652.343899] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1652.343901] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1652.502176] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 1652.510447] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1652.510459] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1652.510460] usb 2-8: hub failed to enable device, error -22
- [ 1652.622333] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1652.622400] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1652.622403] usb 2-8: hub failed to enable device, error -22
- [ 1652.734449] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1652.756333] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 1652.918811] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1652.918851] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1652.918853] usb 2-7: hub failed to enable device, error -22
- [ 1653.030692] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1653.030798] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1653.030801] usb 2-7: hub failed to enable device, error -22
- [ 1653.142778] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1653.159487] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 1653.159489] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 1653.159497] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1653.164935] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1653.165153] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1653.178313] PM: resume of devices complete after 1795.146 msecs
- [ 1653.178961] PM: Finishing wakeup.
- [ 1653.178963] Restarting tasks ...
- [ 1653.179344] pci_bus 0000:01: Allocating resources
- [ 1653.179366] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1653.179817] pci_bus 0000:01: Allocating resources
- [ 1653.179835] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1653.181345] done.
- [ 1653.191747] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 1653.191756] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 1653.209612] cfg80211: World regulatory domain updated:
- [ 1653.209618] cfg80211: DFS Master region: unset
- [ 1653.209620] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 1653.209625] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1653.209629] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1653.209632] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1653.209635] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1653.209638] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1653.314839] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 1654.028365] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 1654.031065] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 1654.034490] wlan0: authenticated
- [ 1654.035396] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 1654.037599] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 1654.039654] wlan0: associated
- [ 1659.147971] PM: Syncing filesystems ... done.
- [ 1659.195853] PM: Preparing system for mem sleep
- [ 1659.195966] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 1659.197649] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 1659.198766] PM: Entering mem sleep
- [ 1659.198819] Suspending console(s) (use no_console_suspend to debug)
- [ 1659.198931] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 1659.205715] cfg80211: Calling CRDA to update world regulatory domain
- [ 1659.205834] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 1659.206529] sd 1:0:0:0: [sda] Stopping disk
- [ 1659.549052] PM: suspend of devices complete after 349.846 msecs
- [ 1659.563881] PM: late suspend of devices complete after 14.814 msecs
- [ 1659.564326] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 1659.564472] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 1659.580167] PM: noirq suspend of devices complete after 16.270 msecs
- [ 1659.580458] ACPI: Preparing to enter system sleep state S3
- [ 1659.580760] PM: Saving platform NVS memory
- [ 1659.581358] Disabling non-boot CPUs ...
- [ 1659.581400] intel_pstate CPU 1 exiting
- [ 1659.582617] kvm: disabling virtualization on CPU1
- [ 1659.683916] smpboot: CPU 1 is now offline
- [ 1659.684146] intel_pstate CPU 2 exiting
- [ 1659.685351] kvm: disabling virtualization on CPU2
- [ 1659.788010] smpboot: CPU 2 is now offline
- [ 1659.788231] intel_pstate CPU 3 exiting
- [ 1659.789402] kvm: disabling virtualization on CPU3
- [ 1659.892082] smpboot: CPU 3 is now offline
- [ 1659.895259] ACPI: Low-level resume complete
- [ 1659.895413] PM: Restoring platform NVS memory
- [ 1659.896299] Enabling non-boot CPUs ...
- [ 1659.896370] x86: Booting SMP configuration:
- [ 1659.896373] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 1659.909580] kvm: enabling virtualization on CPU1
- [ 1659.911926] Intel pstate controlling: cpu 1
- [ 1659.912033] CPU1 is up
- [ 1659.912064] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 1659.924550] kvm: enabling virtualization on CPU2
- [ 1659.926795] Intel pstate controlling: cpu 2
- [ 1659.926845] CPU2 is up
- [ 1659.926866] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 1659.939099] kvm: enabling virtualization on CPU3
- [ 1659.941400] Intel pstate controlling: cpu 3
- [ 1659.941445] CPU3 is up
- [ 1659.947175] ACPI: Waking up from system sleep state S3
- [ 1659.968176] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 1660.076157] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 1660.076247] PM: noirq resume of devices complete after 124.026 msecs
- [ 1660.076578] PM: early resume of devices complete after 0.303 msecs
- [ 1660.076712] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
- [ 1660.076877] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
- [ 1660.077098] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 1660.092186] sd 1:0:0:0: [sda] Starting disk
- [ 1660.412427] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1660.413313] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1660.413635] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1660.419081] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1660.419400] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1660.419497] ata2.00: configured for UDMA/133
- [ 1660.444658] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1660.444758] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1660.444774] usb 2-4: hub failed to enable device, error -22
- [ 1660.556634] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1660.556701] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1660.556704] usb 2-4: hub failed to enable device, error -22
- [ 1660.668680] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1660.685337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 1660.685338] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 1660.685340] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 1660.685341] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 1660.685343] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 1660.796949] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1660.797016] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1660.797018] usb 2-6: hub failed to enable device, error -22
- [ 1660.908855] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1660.908921] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1660.908924] usb 2-6: hub failed to enable device, error -22
- [ 1661.020960] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1661.038536] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 1661.038537] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 1661.038542] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1661.038544] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1661.149248] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1661.149316] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1661.149318] usb 2-7: hub failed to enable device, error -22
- [ 1661.261162] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1661.261261] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1661.261277] usb 2-7: hub failed to enable device, error -22
- [ 1661.373369] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1661.389847] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 1661.389849] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 1661.389855] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1661.501540] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1661.501607] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1661.501609] usb 2-8: hub failed to enable device, error -22
- [ 1661.513326] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 1661.613498] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1661.613537] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1661.613539] usb 2-8: hub failed to enable device, error -22
- [ 1661.725641] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1661.747394] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 1661.750457] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1661.750674] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1661.763415] PM: resume of devices complete after 1685.471 msecs
- [ 1661.763994] PM: Finishing wakeup.
- [ 1661.763996] Restarting tasks ...
- [ 1661.764390] pci_bus 0000:01: Allocating resources
- [ 1661.764410] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1661.767546] pci_bus 0000:01: Allocating resources
- [ 1661.767569] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1661.773521] done.
- [ 1661.776758] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 1661.776783] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 1661.791817] cfg80211: World regulatory domain updated:
- [ 1661.791822] cfg80211: DFS Master region: unset
- [ 1661.791825] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 1661.791830] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1661.791834] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1661.791837] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1661.791841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1661.791844] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1661.897718] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 1662.616105] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 1662.617928] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 1662.618985] wlan0: authenticated
- [ 1662.622167] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 1662.624222] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 1662.626191] wlan0: associated
- [ 1875.694239] mce: [Hardware Error]: Machine check events logged
- [ 1989.647851] systemd-logind[1125]: Lid closed.
- [ 1989.648035] systemd-logind[1125]: Suspending...
- [ 1989.649564] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.649833] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.650648] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.650799] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.651006] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
- [ 1989.651011] acpi INT33C2:00: Cannot transition to non-D0 state from D3
- [ 1989.651015] acpi INT33C3:00: Cannot transition to non-D0 state from D3
- [ 1989.651019] acpi INT33C0:00: Cannot transition to non-D0 state from D3
- [ 1989.651023] acpi INT33C5:00: Cannot transition to non-D0 state from D3
- [ 1989.651043] acpi device:31: Cannot transition to power state D3cold for parent in (unknown)
- [ 1989.651047] acpi INT33C6:00: Cannot transition to non-D0 state from D3
- [ 1989.651633] pci_bus 0000:01: Allocating resources
- [ 1989.651663] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.652104] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.652439] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.654860] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1989.852427] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 1989.861290] cfg80211: Calling CRDA to update world regulatory domain
- [ 1989.867360] cfg80211: World regulatory domain updated:
- [ 1989.867366] cfg80211: DFS Master region: unset
- [ 1989.867369] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 1989.867373] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1989.867376] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1989.867379] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1989.867381] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1989.867384] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1990.129167] PM: Syncing filesystems ... done.
- [ 1990.139542] PM: Preparing system for mem sleep
- [ 1990.139745] Freezing user space processes ... (elapsed 0.537 seconds) done.
- [ 1990.677719] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 1990.678854] PM: Entering mem sleep
- [ 1990.678900] Suspending console(s) (use no_console_suspend to debug)
- [ 1990.679134] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 1990.680481] sd 1:0:0:0: [sda] Stopping disk
- [ 1990.795165] PM: suspend of devices complete after 116.056 msecs
- [ 1990.811120] PM: late suspend of devices complete after 15.939 msecs
- [ 1990.811533] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 1990.811629] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 1990.827424] PM: noirq suspend of devices complete after 16.288 msecs
- [ 1990.827716] ACPI: Preparing to enter system sleep state S3
- [ 1990.828010] PM: Saving platform NVS memory
- [ 1990.828621] Disabling non-boot CPUs ...
- [ 1990.828652] intel_pstate CPU 1 exiting
- [ 1990.829867] kvm: disabling virtualization on CPU1
- [ 1990.931156] smpboot: CPU 1 is now offline
- [ 1990.931386] intel_pstate CPU 2 exiting
- [ 1990.932581] kvm: disabling virtualization on CPU2
- [ 1991.035256] smpboot: CPU 2 is now offline
- [ 1991.035475] intel_pstate CPU 3 exiting
- [ 1991.036646] kvm: disabling virtualization on CPU3
- [ 1991.139319] smpboot: CPU 3 is now offline
- [ 1991.142504] ACPI: Low-level resume complete
- [ 1991.142658] PM: Restoring platform NVS memory
- [ 1991.143549] Enabling non-boot CPUs ...
- [ 1991.143622] x86: Booting SMP configuration:
- [ 1991.143624] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 1991.156818] kvm: enabling virtualization on CPU1
- [ 1991.159157] Intel pstate controlling: cpu 1
- [ 1991.159251] CPU1 is up
- [ 1991.159283] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 1991.171768] kvm: enabling virtualization on CPU2
- [ 1991.174031] Intel pstate controlling: cpu 2
- [ 1991.174084] CPU2 is up
- [ 1991.174109] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 1991.186437] kvm: enabling virtualization on CPU3
- [ 1991.188712] Intel pstate controlling: cpu 3
- [ 1991.188752] CPU3 is up
- [ 1991.194426] ACPI: Waking up from system sleep state S3
- [ 1991.215438] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 1991.323399] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 1991.323514] PM: noirq resume of devices complete after 124.398 msecs
- [ 1991.323825] PM: early resume of devices complete after 0.284 msecs
- [ 1991.323945] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
- [ 1991.324014] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
- [ 1991.324130] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 1991.339435] sd 1:0:0:0: [sda] Starting disk
- [ 1991.663675] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1991.664737] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1991.665060] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1991.670948] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 1991.671172] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1991.671240] ata2.00: configured for UDMA/133
- [ 1991.695934] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1991.696033] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1991.696050] usb 2-4: hub failed to enable device, error -22
- [ 1991.807955] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1991.807966] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 1991.807967] usb 2-4: hub failed to enable device, error -22
- [ 1991.920046] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1991.936620] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 1991.936622] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 1991.936623] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 1991.936624] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 1991.936625] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 1992.048256] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1992.048265] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1992.048267] usb 2-7: hub failed to enable device, error -22
- [ 1992.160126] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1992.160224] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 1992.160241] usb 2-7: hub failed to enable device, error -22
- [ 1992.272214] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 1992.289108] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 1992.289110] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 1992.289115] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1992.400490] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1992.400588] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1992.400604] usb 2-6: hub failed to enable device, error -22
- [ 1992.512524] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1992.512535] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 1992.512536] usb 2-6: hub failed to enable device, error -22
- [ 1992.624477] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 1992.641988] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 1992.641990] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 1992.641994] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1992.641997] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 1992.752773] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1992.752839] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1992.752842] usb 2-8: hub failed to enable device, error -22
- [ 1992.772583] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 1992.864736] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1992.864826] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 1992.864840] usb 2-8: hub failed to enable device, error -22
- [ 1992.976825] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 1992.998756] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 1993.002360] PM: resume of devices complete after 1677.174 msecs
- [ 1993.002995] PM: Finishing wakeup.
- [ 1993.002997] Restarting tasks ...
- [ 1993.004669] pci_bus 0000:01: Allocating resources
- [ 1993.004690] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1993.005154] pci_bus 0000:01: Allocating resources
- [ 1993.005173] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 1993.006149] done.
- [ 1993.015853] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 1993.016003] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 1993.138952] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 1993.196889] systemd-logind[1125]: Operation finished.
- [ 1993.196908] systemd-logind[1125]: Lid opened.
- [ 1993.197834] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1993.198053] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 1993.209346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 1994.646585] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 1994.648478] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 1994.649557] wlan0: authenticated
- [ 1994.650044] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 1994.652163] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 1994.652950] wlan0: associated
- [ 1994.652967] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 1995.166460] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
- [ 1995.176028] cfg80211: Calling CRDA to update world regulatory domain
- [ 1995.176142] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 1995.177885] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 1995.178014] cfg80211: World regulatory domain updated:
- [ 1995.178016] cfg80211: DFS Master region: unset
- [ 1995.178018] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 1995.178021] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1995.178023] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1995.178025] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1995.178027] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1995.178029] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 1995.179412] wlan0: authenticated
- [ 1995.182502] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 1995.184681] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 1995.186874] wlan0: associated
- [ 1996.102622] IPv6: wlan0: IPv6 duplicate address fe80::7e7a:91ff:fe8d:5f86 detected!
- [ 2012.153817] systemd-logind[1125]: New session c3 of user tech.
- [ 2025.808220] mce: [Hardware Error]: Machine check events logged
- [ 2130.937554] PM: Syncing filesystems ... done.
- [ 2130.951382] PM: Preparing system for mem sleep
- [ 2130.951613] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 2130.953270] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 2130.954392] PM: Entering mem sleep
- [ 2130.954441] Suspending console(s) (use no_console_suspend to debug)
- [ 2130.954550] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 2130.963465] cfg80211: Calling CRDA to update world regulatory domain
- [ 2130.963589] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 2130.964357] sd 1:0:0:0: [sda] Stopping disk
- [ 2131.313754] PM: suspend of devices complete after 359.100 msecs
- [ 2131.328638] PM: late suspend of devices complete after 14.876 msecs
- [ 2131.329055] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 2131.329176] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 2131.344924] PM: noirq suspend of devices complete after 16.278 msecs
- [ 2131.345215] ACPI: Preparing to enter system sleep state S3
- [ 2131.345512] PM: Saving platform NVS memory
- [ 2131.346123] Disabling non-boot CPUs ...
- [ 2131.346163] intel_pstate CPU 1 exiting
- [ 2131.347385] kvm: disabling virtualization on CPU1
- [ 2131.448645] smpboot: CPU 1 is now offline
- [ 2131.448893] intel_pstate CPU 2 exiting
- [ 2131.450086] kvm: disabling virtualization on CPU2
- [ 2131.552682] smpboot: CPU 2 is now offline
- [ 2131.552923] intel_pstate CPU 3 exiting
- [ 2131.554105] kvm: disabling virtualization on CPU3
- [ 2131.656704] smpboot: CPU 3 is now offline
- [ 2131.659900] ACPI: Low-level resume complete
- [ 2131.660055] PM: Restoring platform NVS memory
- [ 2131.660940] Enabling non-boot CPUs ...
- [ 2131.661011] x86: Booting SMP configuration:
- [ 2131.661013] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 2131.673871] kvm: enabling virtualization on CPU1
- [ 2131.676233] Intel pstate controlling: cpu 1
- [ 2131.676301] CPU1 is up
- [ 2131.676332] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 2131.688819] kvm: enabling virtualization on CPU2
- [ 2131.691091] Intel pstate controlling: cpu 2
- [ 2131.691145] CPU2 is up
- [ 2131.691171] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 2131.703501] kvm: enabling virtualization on CPU3
- [ 2131.705778] Intel pstate controlling: cpu 3
- [ 2131.705819] CPU3 is up
- [ 2131.711551] ACPI: Waking up from system sleep state S3
- [ 2131.728916] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 2131.836671] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 2131.836767] PM: noirq resume of devices complete after 121.298 msecs
- [ 2131.837119] PM: early resume of devices complete after 0.325 msecs
- [ 2131.837252] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
- [ 2131.837336] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
- [ 2131.837492] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 2131.852685] sd 1:0:0:0: [sda] Starting disk
- [ 2132.172752] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2132.173616] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 2132.173924] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 2132.179257] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 2132.179420] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 2132.179475] ata2.00: configured for UDMA/133
- [ 2132.205054] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2132.205065] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 2132.205067] usb 2-4: hub failed to enable device, error -22
- [ 2132.316868] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2132.316966] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 2132.316983] usb 2-4: hub failed to enable device, error -22
- [ 2132.429009] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2132.445534] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 2132.445536] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 2132.445537] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 2132.445539] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 2132.445540] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 2132.557182] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2132.557192] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 2132.557194] usb 2-6: hub failed to enable device, error -22
- [ 2132.668983] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2132.669082] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 2132.669099] usb 2-6: hub failed to enable device, error -22
- [ 2132.781141] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2132.798470] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 2132.798472] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 2132.798476] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 2132.798479] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 2132.909226] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2132.909325] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 2132.909342] usb 2-7: hub failed to enable device, error -22
- [ 2133.021216] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2133.021227] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 2133.021228] usb 2-7: hub failed to enable device, error -22
- [ 2133.133250] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2133.149677] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 2133.149679] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 2133.149684] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2133.261388] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2133.261398] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 2133.261400] usb 2-8: hub failed to enable device, error -22
- [ 2133.373324] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2133.373341] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 2133.373343] usb 2-8: hub failed to enable device, error -22
- [ 2133.485222] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2133.507070] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 2133.510020] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 2133.510238] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 2133.523536] PM: resume of devices complete after 1685.894 msecs
- [ 2133.536947] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 2133.536951] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 2133.561131] PM: Finishing wakeup.
- [ 2133.561137] Restarting tasks ...
- [ 2133.561504] pci_bus 0000:01: Allocating resources
- [ 2133.561524] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2133.562698] done.
- [ 2133.563314] pci_bus 0000:01: Allocating resources
- [ 2133.563337] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2133.583299] cfg80211: World regulatory domain updated:
- [ 2133.583302] cfg80211: DFS Master region: unset
- [ 2133.583302] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 2133.583305] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2133.583308] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2133.583310] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2133.583312] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2133.583314] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2133.671042] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 2133.813279] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 2134.396184] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 2134.398222] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 2134.399450] wlan0: authenticated
- [ 2134.401425] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 2134.403497] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 2134.405499] wlan0: associated
- [ 2197.393890] systemd-logind[1125]: Lid closed.
- [ 2197.394024] systemd-logind[1125]: Suspending...
- [ 2197.395917] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.396203] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.396986] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.397197] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.397518] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
- [ 2197.397529] acpi INT33C2:00: Cannot transition to non-D0 state from D3
- [ 2197.397537] acpi INT33C3:00: Cannot transition to non-D0 state from D3
- [ 2197.397544] acpi INT33C0:00: Cannot transition to non-D0 state from D3
- [ 2197.397551] acpi INT33C5:00: Cannot transition to non-D0 state from D3
- [ 2197.397587] acpi device:31: Cannot transition to power state D3cold for parent in (unknown)
- [ 2197.397593] acpi INT33C6:00: Cannot transition to non-D0 state from D3
- [ 2197.398375] pci_bus 0000:01: Allocating resources
- [ 2197.398409] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.398735] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.398951] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.399355] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2197.597058] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 2197.607505] cfg80211: Calling CRDA to update world regulatory domain
- [ 2197.637548] cfg80211: World regulatory domain updated:
- [ 2197.637554] cfg80211: DFS Master region: unset
- [ 2197.637556] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 2197.637561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2197.637564] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2197.637567] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2197.637569] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2197.637572] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2197.874331] PM: Syncing filesystems ... done.
- [ 2197.888665] PM: Preparing system for mem sleep
- [ 2197.888883] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 2197.890560] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 2197.891684] PM: Entering mem sleep
- [ 2197.891735] Suspending console(s) (use no_console_suspend to debug)
- [ 2197.891963] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 2197.892669] sd 1:0:0:0: [sda] Stopping disk
- [ 2198.226213] PM: suspend of devices complete after 334.267 msecs
- [ 2198.241103] PM: late suspend of devices complete after 14.883 msecs
- [ 2198.241531] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 2198.241628] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 2198.257380] PM: noirq suspend of devices complete after 16.269 msecs
- [ 2198.257671] ACPI: Preparing to enter system sleep state S3
- [ 2198.257966] PM: Saving platform NVS memory
- [ 2198.258587] Disabling non-boot CPUs ...
- [ 2198.258619] intel_pstate CPU 1 exiting
- [ 2198.259838] kvm: disabling virtualization on CPU1
- [ 2198.361123] smpboot: CPU 1 is now offline
- [ 2198.361355] intel_pstate CPU 2 exiting
- [ 2198.362553] kvm: disabling virtualization on CPU2
- [ 2198.465122] smpboot: CPU 2 is now offline
- [ 2198.465349] intel_pstate CPU 3 exiting
- [ 2198.466519] kvm: disabling virtualization on CPU3
- [ 2198.569181] smpboot: CPU 3 is now offline
- [ 2198.572403] ACPI: Low-level resume complete
- [ 2198.572559] PM: Restoring platform NVS memory
- [ 2198.573445] Enabling non-boot CPUs ...
- [ 2198.573517] x86: Booting SMP configuration:
- [ 2198.573520] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 2198.586550] kvm: enabling virtualization on CPU1
- [ 2198.588899] Intel pstate controlling: cpu 1
- [ 2198.588970] CPU1 is up
- [ 2198.589001] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 2198.601490] kvm: enabling virtualization on CPU2
- [ 2198.603760] Intel pstate controlling: cpu 2
- [ 2198.603812] CPU2 is up
- [ 2198.603838] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 2198.616178] kvm: enabling virtualization on CPU3
- [ 2198.618436] Intel pstate controlling: cpu 3
- [ 2198.618483] CPU3 is up
- [ 2198.624171] ACPI: Waking up from system sleep state S3
- [ 2198.645265] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 2198.753163] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 2198.753261] PM: noirq resume of devices complete after 124.374 msecs
- [ 2198.753628] PM: early resume of devices complete after 0.341 msecs
- [ 2198.753765] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
- [ 2198.753873] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
- [ 2198.754021] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 2198.769213] sd 1:0:0:0: [sda] Starting disk
- [ 2199.089225] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2199.089947] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 2199.090156] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 2199.095449] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 2199.095677] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 2199.095756] ata2.00: configured for UDMA/133
- [ 2199.129450] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2199.129485] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 2199.129487] usb 2-4: hub failed to enable device, error -22
- [ 2199.241321] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2199.241367] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 2199.241369] usb 2-4: hub failed to enable device, error -22
- [ 2199.353307] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2199.370056] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 2199.370058] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 2199.370059] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 2199.370061] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 2199.370062] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 2199.481669] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2199.481679] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 2199.481681] usb 2-7: hub failed to enable device, error -22
- [ 2199.593479] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2199.593577] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 2199.593593] usb 2-7: hub failed to enable device, error -22
- [ 2199.705638] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2199.722092] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 2199.722094] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 2199.722100] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2199.833640] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 2199.833679] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2199.833696] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 2199.833698] usb 2-6: hub failed to enable device, error -22
- [ 2199.945593] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2199.945695] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 2199.945698] usb 2-6: hub failed to enable device, error -22
- [ 2200.057674] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2200.075580] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 2200.075582] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 2200.075590] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 2200.075593] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 2200.241989] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2200.242002] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 2200.242004] usb 2-8: hub failed to enable device, error -22
- [ 2200.353763] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2200.353802] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 2200.353805] usb 2-8: hub failed to enable device, error -22
- [ 2200.465865] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2200.487647] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 2200.490661] PM: resume of devices complete after 1736.493 msecs
- [ 2200.507068] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 2200.507074] ------------[ cut here ]------------
- [ 2200.507082] WARNING: CPU: 3 PID: 22578 at /build/buildd/linux-3.16.0/drivers/base/firmware_class.c:1108 _request_firmware+0x4f1/0xb60()
- [ 2200.507112] Modules linked in: ctr ccm rfcomm bnep arc4 hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_accel_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep uvcvideo snd_pcm videobuf2_vmalloc videobuf2_memops videobuf2_core intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm snd_rawmidi joydev iwlmvm v4l2_common mac80211 serio_raw hid_multitouch videodev media hid_sensor_hub snd_seq iwlwifi cfg80211 snd_seq_device lpc_ich btusb mei_me bluetooth snd_timer 6lowpan_iphc snd shpchp dw_dmac mei nls_iso8859_1 dw_dmac_core soundcore
- [ 2200.507130] ideapad_laptop sparse_keymap int3403_thermal spi_pxa2xx_platform i2c_hid 8250_dw parport_pc soc_button_array i2c_designware_platform i2c_designware_core intel_smartconnect ppdev mac_hid lp parport dm_crypt usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 i915 lrw gf128mul glue_helper ablk_helper cryptd i2c_algo_bit drm_kms_helper drm psmouse ahci libahci video sdhci_acpi sdhci
- [ 2200.507132] CPU: 3 PID: 22578 Comm: kworker/u17:0 Not tainted 3.16.0-29-generic #39-Ubuntu
- [ 2200.507133] Hardware name: LENOVO 20266/Yoga2, BIOS 76CN38WW 06/27/2014
- [ 2200.507147] Workqueue: hci0 hci_power_on [bluetooth]
- [ 2200.507150] 0000000000000009 ffff8802328a3bb0 ffffffff8178218a 0000000000000000
- [ 2200.507151] ffff8802328a3be8 ffffffff8106fedd ffff8802328a3d10 ffff88024fd757c0
- [ 2200.507153] ffff88008c791d80 00000000fffffff5 0000000000000220 ffff8802328a3bf8
- [ 2200.507154] Call Trace:
- [ 2200.507160] [<ffffffff8178218a>] dump_stack+0x45/0x56
- [ 2200.507164] [<ffffffff8106fedd>] warn_slowpath_common+0x7d/0xa0
- [ 2200.507166] [<ffffffff8106ffba>] warn_slowpath_null+0x1a/0x20
- [ 2200.507169] [<ffffffff814e48f1>] _request_firmware+0x4f1/0xb60
- [ 2200.507172] [<ffffffff814e4f91>] request_firmware+0x31/0x50
- [ 2200.507176] [<ffffffffc0518130>] btusb_setup_intel+0x1c0/0x830 [btusb]
- [ 2200.507178] [<ffffffff814db816>] ? rpm_idle+0xd6/0x2b0
- [ 2200.507188] [<ffffffffc04a7145>] hci_dev_do_open+0x235/0x930 [bluetooth]
- [ 2200.507191] [<ffffffff810a2869>] ? ttwu_do_wakeup+0x19/0xd0
- [ 2200.507200] [<ffffffffc04a7e20>] hci_power_on+0x40/0x180 [bluetooth]
- [ 2200.507202] [<ffffffff810a547f>] ? try_to_wake_up+0x1ff/0x370
- [ 2200.507204] [<ffffffff8108da32>] process_one_work+0x182/0x4e0
- [ 2200.507206] [<ffffffff8108ddfb>] worker_thread+0x6b/0x6a0
- [ 2200.507208] [<ffffffff8108dd90>] ? process_one_work+0x4e0/0x4e0
- [ 2200.507210] [<ffffffff81094c6b>] kthread+0xdb/0x100
- [ 2200.507213] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2200.507216] [<ffffffff8178a0fc>] ret_from_fork+0x7c/0xb0
- [ 2200.507219] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2200.507220] ---[ end trace fd958139dc9cf5c1 ]---
- [ 2200.507222] bluetooth hci0: firmware: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq will not be loaded
- [ 2200.507224] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-11)
- [ 2200.507226] ------------[ cut here ]------------
- [ 2200.507229] WARNING: CPU: 3 PID: 22578 at /build/buildd/linux-3.16.0/drivers/base/firmware_class.c:1108 _request_firmware+0x4f1/0xb60()
- [ 2200.507249] Modules linked in: ctr ccm rfcomm bnep arc4 hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_accel_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep uvcvideo snd_pcm videobuf2_vmalloc videobuf2_memops videobuf2_core intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm snd_rawmidi joydev iwlmvm v4l2_common mac80211 serio_raw hid_multitouch videodev media hid_sensor_hub snd_seq iwlwifi cfg80211 snd_seq_device lpc_ich btusb mei_me bluetooth snd_timer 6lowpan_iphc snd shpchp dw_dmac mei nls_iso8859_1 dw_dmac_core soundcore
- [ 2200.507261] ideapad_laptop sparse_keymap int3403_thermal spi_pxa2xx_platform i2c_hid 8250_dw parport_pc soc_button_array i2c_designware_platform i2c_designware_core intel_smartconnect ppdev mac_hid lp parport dm_crypt usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 i915 lrw gf128mul glue_helper ablk_helper cryptd i2c_algo_bit drm_kms_helper drm psmouse ahci libahci video sdhci_acpi sdhci
- [ 2200.507263] CPU: 3 PID: 22578 Comm: kworker/u17:0 Tainted: G W 3.16.0-29-generic #39-Ubuntu
- [ 2200.507263] Hardware name: LENOVO 20266/Yoga2, BIOS 76CN38WW 06/27/2014
- [ 2200.507271] Workqueue: hci0 hci_power_on [bluetooth]
- [ 2200.507273] 0000000000000009 ffff8802328a3bb0 ffffffff8178218a 0000000000000000
- [ 2200.507274] ffff8802328a3be8 ffffffff8106fedd ffff8802328a3d10 ffff88024fd757c0
- [ 2200.507276] ffff88008c791d80 00000000fffffff5 0000000000000220 ffff8802328a3bf8
- [ 2200.507276] Call Trace:
- [ 2200.507279] [<ffffffff8178218a>] dump_stack+0x45/0x56
- [ 2200.507282] [<ffffffff8106fedd>] warn_slowpath_common+0x7d/0xa0
- [ 2200.507284] [<ffffffff8106ffba>] warn_slowpath_null+0x1a/0x20
- [ 2200.507286] [<ffffffff814e48f1>] _request_firmware+0x4f1/0xb60
- [ 2200.507289] [<ffffffff814e4f91>] request_firmware+0x31/0x50
- [ 2200.507293] [<ffffffffc05183ed>] btusb_setup_intel+0x47d/0x830 [btusb]
- [ 2200.507295] [<ffffffff814db816>] ? rpm_idle+0xd6/0x2b0
- [ 2200.507303] [<ffffffffc04a7145>] hci_dev_do_open+0x235/0x930 [bluetooth]
- [ 2200.507305] [<ffffffff810a2869>] ? ttwu_do_wakeup+0x19/0xd0
- [ 2200.507313] [<ffffffffc04a7e20>] hci_power_on+0x40/0x180 [bluetooth]
- [ 2200.507315] [<ffffffff810a547f>] ? try_to_wake_up+0x1ff/0x370
- [ 2200.507317] [<ffffffff8108da32>] process_one_work+0x182/0x4e0
- [ 2200.507319] [<ffffffff8108ddfb>] worker_thread+0x6b/0x6a0
- [ 2200.507320] [<ffffffff8108dd90>] ? process_one_work+0x4e0/0x4e0
- [ 2200.507323] [<ffffffff81094c6b>] kthread+0xdb/0x100
- [ 2200.507325] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2200.507328] [<ffffffff8178a0fc>] ret_from_fork+0x7c/0xb0
- [ 2200.507330] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2200.507331] ---[ end trace fd958139dc9cf5c2 ]---
- [ 2200.507332] bluetooth hci0: firmware: intel/ibt-hw-37.7.bseq will not be loaded
- [ 2200.507333] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq
- [ 2200.537773] PM: Finishing wakeup.
- [ 2200.537776] Restarting tasks ...
- [ 2200.538149] pci_bus 0000:01: Allocating resources
- [ 2200.538169] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2200.538548] done.
- [ 2200.540075] pci_bus 0000:01: Allocating resources
- [ 2200.540095] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2200.740108] systemd-logind[1125]: Operation finished.
- [ 2200.740144] systemd-logind[1125]: Lid opened.
- [ 2200.741178] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 2200.741395] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 2200.752763] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 2202.186374] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 2202.188920] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 2202.190143] wlan0: authenticated
- [ 2202.194201] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 2202.196373] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 2202.198412] wlan0: associated
- [ 2202.198443] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 2202.410939] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
- [ 2202.420142] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 2202.422338] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 2202.422648] cfg80211: Calling CRDA to update world regulatory domain
- [ 2202.423368] wlan0: authenticated
- [ 2202.426254] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 2202.428537] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 2202.430563] wlan0: associated
- [ 2202.432726] cfg80211: World regulatory domain updated:
- [ 2202.432729] cfg80211: DFS Master region: unset
- [ 2202.432730] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 2202.432732] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2202.432733] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2202.432734] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2202.432735] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2202.432736] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2203.982589] IPv6: wlan0: IPv6 duplicate address fe80::7e7a:91ff:fe8d:5f86 detected!
- [ 2246.125825] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.126097] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.126724] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.126804] systemd-logind[1125]: Lid closed.
- [ 2246.126910] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.126993] systemd-logind[1125]: Suspending...
- [ 2246.127223] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
- [ 2246.127233] acpi INT33C2:00: Cannot transition to non-D0 state from D3
- [ 2246.127241] acpi INT33C3:00: Cannot transition to non-D0 state from D3
- [ 2246.127248] acpi INT33C0:00: Cannot transition to non-D0 state from D3
- [ 2246.127254] acpi INT33C5:00: Cannot transition to non-D0 state from D3
- [ 2246.127292] acpi device:31: Cannot transition to power state D3cold for parent in (unknown)
- [ 2246.127299] acpi INT33C6:00: Cannot transition to non-D0 state from D3
- [ 2246.128095] pci_bus 0000:01: Allocating resources
- [ 2246.128127] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.128573] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.128896] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.129475] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2246.330775] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 2246.341754] cfg80211: Calling CRDA to update world regulatory domain
- [ 2246.370899] cfg80211: World regulatory domain updated:
- [ 2246.370906] cfg80211: DFS Master region: unset
- [ 2246.370909] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 2246.370915] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2246.370920] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2246.370925] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2246.370929] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2246.370933] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2246.610617] PM: Syncing filesystems ... done.
- [ 2246.625192] PM: Preparing system for mem sleep
- [ 2246.625380] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 2246.627039] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 2246.628161] PM: Entering mem sleep
- [ 2246.628216] Suspending console(s) (use no_console_suspend to debug)
- [ 2246.628448] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 2246.629243] sd 1:0:0:0: [sda] Stopping disk
- [ 2246.964940] PM: suspend of devices complete after 336.174 msecs
- [ 2246.979869] PM: late suspend of devices complete after 14.907 msecs
- [ 2246.980277] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 2246.980379] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
- [ 2246.996150] PM: noirq suspend of devices complete after 16.258 msecs
- [ 2246.996442] ACPI: Preparing to enter system sleep state S3
- [ 2246.996739] PM: Saving platform NVS memory
- [ 2246.997357] Disabling non-boot CPUs ...
- [ 2246.997396] intel_pstate CPU 1 exiting
- [ 2246.998620] kvm: disabling virtualization on CPU1
- [ 2247.099962] smpboot: CPU 1 is now offline
- [ 2247.100200] intel_pstate CPU 2 exiting
- [ 2247.101396] kvm: disabling virtualization on CPU2
- [ 2247.204099] smpboot: CPU 2 is now offline
- [ 2247.204317] intel_pstate CPU 3 exiting
- [ 2247.205484] kvm: disabling virtualization on CPU3
- [ 2247.205487] smpboot: CPU 3 is now offline
- [ 2247.208701] ACPI: Low-level resume complete
- [ 2247.208857] PM: Restoring platform NVS memory
- [ 2247.209741] Enabling non-boot CPUs ...
- [ 2247.209809] x86: Booting SMP configuration:
- [ 2247.209811] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 2247.222977] kvm: enabling virtualization on CPU1
- [ 2247.225334] Intel pstate controlling: cpu 1
- [ 2247.225403] CPU1 is up
- [ 2247.225432] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 2247.237917] kvm: enabling virtualization on CPU2
- [ 2247.240201] Intel pstate controlling: cpu 2
- [ 2247.240255] CPU2 is up
- [ 2247.240281] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 2247.252611] kvm: enabling virtualization on CPU3
- [ 2247.254880] Intel pstate controlling: cpu 3
- [ 2247.254921] CPU3 is up
- [ 2247.260603] ACPI: Waking up from system sleep state S3
- [ 2247.280282] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 2247.388287] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
- [ 2247.388397] PM: noirq resume of devices complete after 122.848 msecs
- [ 2247.388697] PM: early resume of devices complete after 0.273 msecs
- [ 2247.388835] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
- [ 2247.388888] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
- [ 2247.389039] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 2247.404336] sd 1:0:0:0: [sda] Starting disk
- [ 2247.724702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2247.725670] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 2247.725987] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 2247.731432] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
- [ 2247.731772] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 2247.731870] ata2.00: configured for UDMA/133
- [ 2247.756964] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2247.756974] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 2247.756976] usb 2-6: hub failed to enable device, error -22
- [ 2247.868906] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2247.868932] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
- [ 2247.868934] usb 2-6: hub failed to enable device, error -22
- [ 2247.981040] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
- [ 2247.998684] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f48
- [ 2247.998686] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f275f00
- [ 2247.998691] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 2247.998693] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
- [ 2248.109487] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2248.109497] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 2248.109499] usb 2-7: hub failed to enable device, error -22
- [ 2248.221369] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2248.221434] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
- [ 2248.221436] usb 2-7: hub failed to enable device, error -22
- [ 2248.333533] usb 2-7: reset full-speed USB device number 8 using xhci_hcd
- [ 2248.350435] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef00
- [ 2248.350437] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e57ef48
- [ 2248.350443] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2248.461822] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2248.461836] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 2248.461838] usb 2-4: hub failed to enable device, error -22
- [ 2248.573829] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2248.573843] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
- [ 2248.573845] usb 2-4: hub failed to enable device, error -22
- [ 2248.685988] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
- [ 2248.702631] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff600
- [ 2248.702632] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff648
- [ 2248.702634] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f1ff690
- [ 2248.702635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec53c0
- [ 2248.702636] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024eec5408
- [ 2248.814350] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2248.814417] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 2248.814419] usb 2-8: hub failed to enable device, error -22
- [ 2248.918277] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 2248.926406] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2248.926420] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
- [ 2248.926421] usb 2-8: hub failed to enable device, error -22
- [ 2249.038534] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
- [ 2249.060482] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880251776960
- [ 2249.064079] PM: resume of devices complete after 1673.187 msecs
- [ 2249.082433] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 2249.082438] ------------[ cut here ]------------
- [ 2249.082446] WARNING: CPU: 3 PID: 23199 at /build/buildd/linux-3.16.0/drivers/base/firmware_class.c:1108 _request_firmware+0x4f1/0xb60()
- [ 2249.082483] Modules linked in: ctr ccm rfcomm bnep arc4 hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_accel_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep uvcvideo snd_pcm videobuf2_vmalloc videobuf2_memops videobuf2_core intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm snd_rawmidi joydev iwlmvm v4l2_common mac80211 serio_raw hid_multitouch videodev media hid_sensor_hub snd_seq iwlwifi cfg80211 snd_seq_device lpc_ich btusb mei_me bluetooth snd_timer 6lowpan_iphc snd shpchp dw_dmac mei nls_iso8859_1 dw_dmac_core soundcore
- [ 2249.082500] ideapad_laptop sparse_keymap int3403_thermal spi_pxa2xx_platform i2c_hid 8250_dw parport_pc soc_button_array i2c_designware_platform i2c_designware_core intel_smartconnect ppdev mac_hid lp parport dm_crypt usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 i915 lrw gf128mul glue_helper ablk_helper cryptd i2c_algo_bit drm_kms_helper drm psmouse ahci libahci video sdhci_acpi sdhci
- [ 2249.082503] CPU: 3 PID: 23199 Comm: kworker/u17:0 Tainted: G W 3.16.0-29-generic #39-Ubuntu
- [ 2249.082504] Hardware name: LENOVO 20266/Yoga2, BIOS 76CN38WW 06/27/2014
- [ 2249.082517] Workqueue: hci0 hci_power_on [bluetooth]
- [ 2249.082520] 0000000000000009 ffff8802328a3bb0 ffffffff8178218a 0000000000000000
- [ 2249.082521] ffff8802328a3be8 ffffffff8106fedd ffff8802328a3d10 ffff8802234c6ec0
- [ 2249.082523] ffff8802237e1b40 00000000fffffff5 0000000000000220 ffff8802328a3bf8
- [ 2249.082524] Call Trace:
- [ 2249.082529] [<ffffffff8178218a>] dump_stack+0x45/0x56
- [ 2249.082532] [<ffffffff8106fedd>] warn_slowpath_common+0x7d/0xa0
- [ 2249.082535] [<ffffffff8106ffba>] warn_slowpath_null+0x1a/0x20
- [ 2249.082537] [<ffffffff814e48f1>] _request_firmware+0x4f1/0xb60
- [ 2249.082540] [<ffffffff814e4f91>] request_firmware+0x31/0x50
- [ 2249.082544] [<ffffffffc0518130>] btusb_setup_intel+0x1c0/0x830 [btusb]
- [ 2249.082547] [<ffffffff814db816>] ? rpm_idle+0xd6/0x2b0
- [ 2249.082556] [<ffffffffc04a7145>] hci_dev_do_open+0x235/0x930 [bluetooth]
- [ 2249.082559] [<ffffffff810a2869>] ? ttwu_do_wakeup+0x19/0xd0
- [ 2249.082568] [<ffffffffc04a7e20>] hci_power_on+0x40/0x180 [bluetooth]
- [ 2249.082570] [<ffffffff810a547f>] ? try_to_wake_up+0x1ff/0x370
- [ 2249.082573] [<ffffffff8108da32>] process_one_work+0x182/0x4e0
- [ 2249.082575] [<ffffffff8108ddfb>] worker_thread+0x6b/0x6a0
- [ 2249.082576] [<ffffffff8108dd90>] ? process_one_work+0x4e0/0x4e0
- [ 2249.082579] [<ffffffff81094c6b>] kthread+0xdb/0x100
- [ 2249.082582] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2249.082585] [<ffffffff8178a0fc>] ret_from_fork+0x7c/0xb0
- [ 2249.082588] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2249.082589] ---[ end trace fd958139dc9cf5c3 ]---
- [ 2249.082591] bluetooth hci0: firmware: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq will not be loaded
- [ 2249.082594] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-11)
- [ 2249.082595] ------------[ cut here ]------------
- [ 2249.082598] WARNING: CPU: 3 PID: 23199 at /build/buildd/linux-3.16.0/drivers/base/firmware_class.c:1108 _request_firmware+0x4f1/0xb60()
- [ 2249.082617] Modules linked in: ctr ccm rfcomm bnep arc4 hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_accel_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep uvcvideo snd_pcm videobuf2_vmalloc videobuf2_memops videobuf2_core intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm snd_rawmidi joydev iwlmvm v4l2_common mac80211 serio_raw hid_multitouch videodev media hid_sensor_hub snd_seq iwlwifi cfg80211 snd_seq_device lpc_ich btusb mei_me bluetooth snd_timer 6lowpan_iphc snd shpchp dw_dmac mei nls_iso8859_1 dw_dmac_core soundcore
- [ 2249.082628] ideapad_laptop sparse_keymap int3403_thermal spi_pxa2xx_platform i2c_hid 8250_dw parport_pc soc_button_array i2c_designware_platform i2c_designware_core intel_smartconnect ppdev mac_hid lp parport dm_crypt usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 i915 lrw gf128mul glue_helper ablk_helper cryptd i2c_algo_bit drm_kms_helper drm psmouse ahci libahci video sdhci_acpi sdhci
- [ 2249.082630] CPU: 3 PID: 23199 Comm: kworker/u17:0 Tainted: G W 3.16.0-29-generic #39-Ubuntu
- [ 2249.082631] Hardware name: LENOVO 20266/Yoga2, BIOS 76CN38WW 06/27/2014
- [ 2249.082638] Workqueue: hci0 hci_power_on [bluetooth]
- [ 2249.082640] 0000000000000009 ffff8802328a3bb0 ffffffff8178218a 0000000000000000
- [ 2249.082642] ffff8802328a3be8 ffffffff8106fedd ffff8802328a3d10 ffff8802234c6ec0
- [ 2249.082644] ffff8802237e1b40 00000000fffffff5 0000000000000220 ffff8802328a3bf8
- [ 2249.082644] Call Trace:
- [ 2249.082647] [<ffffffff8178218a>] dump_stack+0x45/0x56
- [ 2249.082649] [<ffffffff8106fedd>] warn_slowpath_common+0x7d/0xa0
- [ 2249.082651] [<ffffffff8106ffba>] warn_slowpath_null+0x1a/0x20
- [ 2249.082654] [<ffffffff814e48f1>] _request_firmware+0x4f1/0xb60
- [ 2249.082656] [<ffffffff814e4f91>] request_firmware+0x31/0x50
- [ 2249.082660] [<ffffffffc05183ed>] btusb_setup_intel+0x47d/0x830 [btusb]
- [ 2249.082662] [<ffffffff814db816>] ? rpm_idle+0xd6/0x2b0
- [ 2249.082670] [<ffffffffc04a7145>] hci_dev_do_open+0x235/0x930 [bluetooth]
- [ 2249.082672] [<ffffffff810a2869>] ? ttwu_do_wakeup+0x19/0xd0
- [ 2249.082680] [<ffffffffc04a7e20>] hci_power_on+0x40/0x180 [bluetooth]
- [ 2249.082682] [<ffffffff810a547f>] ? try_to_wake_up+0x1ff/0x370
- [ 2249.082684] [<ffffffff8108da32>] process_one_work+0x182/0x4e0
- [ 2249.082686] [<ffffffff8108ddfb>] worker_thread+0x6b/0x6a0
- [ 2249.082687] [<ffffffff8108dd90>] ? process_one_work+0x4e0/0x4e0
- [ 2249.082690] [<ffffffff81094c6b>] kthread+0xdb/0x100
- [ 2249.082693] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2249.082695] [<ffffffff8178a0fc>] ret_from_fork+0x7c/0xb0
- [ 2249.082697] [<ffffffff81094b90>] ? kthread_create_on_node+0x1c0/0x1c0
- [ 2249.082698] ---[ end trace fd958139dc9cf5c4 ]---
- [ 2249.082700] bluetooth hci0: firmware: intel/ibt-hw-37.7.bseq will not be loaded
- [ 2249.082700] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq
- [ 2249.122211] PM: Finishing wakeup.
- [ 2249.122214] Restarting tasks ...
- [ 2249.122610] pci_bus 0000:01: Allocating resources
- [ 2249.122630] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2249.124702] pci_bus 0000:01: Allocating resources
- [ 2249.124721] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 2249.126871] done.
- [ 2249.326996] systemd-logind[1125]: Operation finished.
- [ 2249.327016] systemd-logind[1125]: Lid opened.
- [ 2249.328133] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 2249.328352] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
- [ 2249.339474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 2250.670532] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 2250.672593] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 2250.673810] wlan0: authenticated
- [ 2250.676604] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 2250.678776] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 2250.683191] wlan0: associated
- [ 2250.683260] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 2250.928923] mce: [Hardware Error]: Machine check events logged
- [ 2251.860842] wlan0: deauthenticating from 00:02:6f:62:ce:48 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
- [ 2251.867561] wlan0: authenticate with 00:02:6f:62:ce:48
- [ 2251.868456] wlan0: send auth to 00:02:6f:62:ce:48 (try 1/3)
- [ 2251.868507] cfg80211: Calling CRDA to update world regulatory domain
- [ 2251.870004] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 2251.872553] wlan0: authenticated
- [ 2251.874263] wlan0: associate with 00:02:6f:62:ce:48 (try 1/3)
- [ 2251.876323] wlan0: RX AssocResp from 00:02:6f:62:ce:48 (capab=0xc31 status=0 aid=2)
- [ 2251.878285] wlan0: associated
- [ 2251.878326] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 2251.881923] cfg80211: World regulatory domain updated:
- [ 2251.881926] cfg80211: DFS Master region: unset
- [ 2251.881927] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 2251.881929] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2251.881930] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2251.881931] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2251.881932] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 2251.881933] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement