API tools faq
paste
remim

smartctl-a-ST4000VN000-1H4168-W300QPNC

remim
Aug 31st, 2018
64
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.43 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.52-gentoo] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate NAS HDD
  6. Device Model: ST4000VN000-1H4168
  7. Serial Number: W300QPNC
  8. LU WWN Device Id: 5 000c50 06deb2658
  9. Firmware Version: SC43
  10. User Capacity: 4 000 787 030 016 bytes [4,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5900 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Fri Aug 31 09:57:28 2018 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 107) seconds.
  33. Offline data collection
  34. capabilities: (0x73) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. No Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 539) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x10bd) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 117 082 006 Pre-fail Always - 166723160
  62. 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 259
  64. 5 Reallocated_Sector_Ct 0x0033 083 083 010 Pre-fail Always - 21952
  65. 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 4502037663
  66. 9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 33446
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 257
  69. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1063
  71. 188 Command_Timeout 0x0032 100 074 000 Old_age Always - 141739819098
  72. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 2093
  73. 190 Airflow_Temperature_Cel 0x0022 072 050 045 Old_age Always - 28 (Min/Max 17/28)
  74. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  75. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 52
  76. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 742
  77. 194 Temperature_Celsius 0x0022 028 050 000 Old_age Always - 28 (0 16 0 0 0)
  78. 197 Current_Pending_Sector 0x0012 100 085 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0010 100 085 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81.  
  82. SMART Error Log Version: 1
  83. ATA Error Count: 1065 (device log contains only the most recent five errors)
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 1065 occurred at disk power-on lifetime: 33423 hours (1392 days + 15 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. 60 00 00 ff ff ff 4f 00 1d+13:55:37.796 READ FPDMA QUEUED
  110. 61 00 00 ff ff ff 4f 00 1d+13:55:37.794 WRITE FPDMA QUEUED
  111. 60 00 00 ff ff ff 4f 00 1d+13:55:37.792 READ FPDMA QUEUED
  112. 61 00 00 ff ff ff 4f 00 1d+13:55:37.762 WRITE FPDMA QUEUED
  113. 60 00 00 ff ff ff 4f 00 1d+13:55:37.402 READ FPDMA QUEUED
  114.  
  115. Error 1064 occurred at disk power-on lifetime: 33372 hours (1390 days + 12 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 40 51 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. 25 00 00 ff ff ff 4f 00 15:59:56.582 READ DMA EXT
  127. 25 00 20 ff ff ff 4f 00 15:59:53.638 READ DMA EXT
  128. 25 00 08 ff ff ff 4f 00 15:59:53.598 READ DMA EXT
  129. 25 00 20 ff ff ff 4f 00 15:59:53.595 READ DMA EXT
  130. 25 00 08 ff ff ff 4f 00 15:59:53.586 READ DMA EXT
  131.  
  132. Error 1063 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. 25 00 08 ff ff ff ef 00 3d+04:40:01.067 READ DMA EXT
  144. 25 00 08 ff ff ff ef 00 3d+04:39:59.623 READ DMA EXT
  145. 25 00 08 ff ff ff ef 00 3d+04:39:58.677 READ DMA EXT
  146. 25 00 08 ff ff ff ef 00 3d+04:39:58.676 READ DMA EXT
  147. 25 00 08 ff ff ff ef 00 3d+04:39:58.095 READ DMA EXT
  148.  
  149. Error 1062 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. 25 00 08 ff ff ff ef 00 3d+04:39:52.394 READ DMA EXT
  161. 25 00 08 ff ff ff ef 00 3d+04:39:48.604 READ DMA EXT
  162. 25 00 08 ff ff ff ef 00 3d+04:39:47.742 READ DMA EXT
  163. 25 00 08 ff ff ff ef 00 3d+04:39:46.836 READ DMA EXT
  164. ef 10 02 00 00 00 a0 00 3d+04:39:46.835 SET FEATURES [Enable SATA feature]
  165.  
  166. Error 1061 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  167. When the command that caused the error occurred, the device was active or idle.
  168.  
  169. After command completion occurred, registers were:
  170. ER ST SC SN CL CH DH
  171. -- -- -- -- -- -- --
  172. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  173.  
  174. Commands leading to the command that caused the error were:
  175. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  176. -- -- -- -- -- -- -- -- ---------------- --------------------
  177. 25 00 08 ff ff ff ef 00 3d+04:39:42.879 READ DMA EXT
  178. 25 00 08 ff ff ff ef 00 3d+04:39:39.220 READ DMA EXT
  179. 25 00 08 ff ff ff ef 00 3d+04:39:37.582 READ DMA EXT
  180. ef 10 02 00 00 00 a0 00 3d+04:39:37.582 SET FEATURES [Enable SATA feature]
  181. 27 00 00 00 00 00 e0 00 3d+04:39:37.581 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  182.  
  183. SMART Self-test log structure revision number 1
  184. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!