Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- openmediavault 5.5.23-1 (Usul) openmediavault ttyS2
- Copyright (C) 2009-2021 by Volker Theile. All rights reserved.
- To manage the system visit the openmediavault web control panel:
- eth0: 192.168.1.230
- eth0: fe80::872:3b74:d55b:c24e
- By default the web control panel administrator account has the
- username 'admin' and password 'openmediavault'.
- It is recommended that you change the password for this account
- within the web control panel or using the 'omv-firstaid' CLI
- command.
- For more information regarding this appliance, please visit the
- web site: https://www.openmediavault.org
- openmediavault login: DDR Version 1.24 20191016
- In
- channel 0
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 416MHz 0,1
- Channel 0: LPDDR4,416MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,416MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- channel 0, cs 0, advanced training done
- channel 1, cs 0, advanced training done
- change freq to 856MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x40
- ch 1 ddrconfig = 0x101, ddrsize = 0x40
- pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
- ddr_set_rate to 328MHZ
- ddr_set_rate to 666MHZ
- ddr_set_rate to 928MHZ
- channel 0, cs 0, advanced training done
- channel 1, cs 0, advanced training done
- ddr_set_rate to 416MHZ, ctl_index 0
- ddr_set_rate to 856MHZ, ctl_index 1
- support 416 856 328 666 928 MHz, current 856MHz
- OUT
- Boot1: 2019-03-14, version: 1.19
- CPUId = 0x0
- ChipType = 0x10, 254
- SdmmcInit=2 0
- BootCapSize=100000
- UserCapSize=14910MB
- FwPartOffset=2000 , 100000
- mmc0:cmd5,20
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=29844MB
- FwPartOffset=2000 , 0
- StorageInit ok = 66750
- SecureMode = 0
- SecureInit read PBA: 0x4
- SecureInit read PBA: 0x404
- SecureInit read PBA: 0x804
- SecureInit read PBA: 0xc04
- SecureInit read PBA: 0x1004
- SecureInit read PBA: 0x1404
- SecureInit read PBA: 0x1804
- SecureInit read PBA: 0x1c04
- SecureInit ret = 0, SecureMode = 0
- atags_set_bootdev: ret:(0)
- GPT 0x3380ec0 signature is wrong
- recovery gpt...
- GPT 0x3380ec0 signature is wrong
- recovery gpt fail!
- LoadTrust Addr:0x4000
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xe5674
- RunBL31 0x40000
- NOTICE: BL31: v1.3(debug):42583b6
- NOTICE: BL31: Built : 07:55:13, Oct 15 2019
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1190): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2020.10-armbian (Jan 05 2021 - 00:07:57 +0100)
- SoC: Rockchip rk3399
- Reset cause: POR
- DRAM: 3.9 GiB
- PMIC: RK808
- SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- MMC: mmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Model: Helios64
- Revision: 1.2 - 4GB non ECC
- Net: eth0: ethernet@fe300000
- scanning bus for devices...
- starting USB...
- Bus usb@fe380000: USB EHCI 1.00
- Bus dwc3: usb maximum-speed not found
- Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus usb@fe380000 for devices... 1 USB Device(s) found
- scanning bus dwc3 for devices... cannot reset port 4!?
- 4 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found U-Boot script /boot/boot.scr
- 3185 bytes read in 7 ms (444.3 KiB/s)
- ## Executing script at 00500000
- Boot script loaded from mmc 1
- 219 bytes read in 6 ms (35.2 KiB/s)
- 16185267 bytes read in 693 ms (22.3 MiB/s)
- 27507200 bytes read in 1176 ms (22.3 MiB/s)
- 81968 bytes read in 16 ms (4.9 MiB/s)
- 2698 bytes read in 12 ms (218.8 KiB/s)
- Applying kernel provided DT fixup script (rockchip-fixup.scr)
- ## Executing script at 09000000
- Moving Image from 0x2080000 to 0x2200000, end=3cd0000
- ## Loading init Ramdisk from Legacy Image at 06000000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 16185203 Bytes = 15.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f4f80000, end f5eef773 ... OK
- Loading Device Tree to 00000000f4f03000, end 00000000f4f7ffff ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.9.14-rockchip64 (root@desktop) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020
- [ 0.000000] Machine model: Helios64
- [ 0.000000] printk: debug: ignoring loglevel setting.
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 128 MiB at 0x00000000ecc00000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf77d9100-0xf77dafff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
- [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] On node 0 totalpages: 1015296
- [ 0.000000] DMA zone: 4088 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 261632 pages, LIFO batch:63
- [ 0.000000] DMA32 zone: 11776 pages used for memmap
- [ 0.000000] DMA32 zone: 753664 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 32 pages/cpu s93784 r8192 d29096 u131072
- [ 0.000000] pcpu-alloc: s93784 r8192 d29096 u131072 alloc=32*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: root=UUID=ccb6ee8d-ef6f-4c67-a119-42c2331b5c00 rootwait rootfstype=ext4 console=ttyS2,1500000 consoleblank=0 loglevel=7 ubootpart=e950b4fc-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u earlyprintk ignore_loglevel cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
- [ 0.000000] Memory: 3740028K/4061184K available (14464K kernel code, 2094K rwdata, 5980K rodata, 4224K init, 573K bss, 190084K reserved, 131072K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6d00000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000000f6cb0000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6cc0000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] random: get_random_bytes called from start_kernel+0x698/0x850 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.001499] Console: colour dummy device 80x25
- [ 0.001637] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.001656] pid_max: default: 32768 minimum: 301
- [ 0.001812] LSM: Security Framework initializing
- [ 0.001860] Yama: becoming mindful.
- [ 0.002015] AppArmor: AppArmor initialized
- [ 0.002110] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.002145] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.005449] rcu: Hierarchical SRCU implementation.
- [ 0.006631] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.007255] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.009773] EFI services will not be available.
- [ 0.010479] smp: Bringing up secondary CPUs ...
- [ 0.011528] Detected VIPT I-cache on CPU1
- [ 0.011577] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.011596] GICv3: CPU1: using allocated LPI pending table @0x00000000f6cd0000
- [ 0.011657] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.013053] Detected VIPT I-cache on CPU2
- [ 0.013102] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.013120] GICv3: CPU2: using allocated LPI pending table @0x00000000f6ce0000
- [ 0.013178] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.014537] Detected VIPT I-cache on CPU3
- [ 0.014582] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.014601] GICv3: CPU3: using allocated LPI pending table @0x00000000f6cf0000
- [ 0.014658] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.016136] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.016146] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.016153] Detected PIPT I-cache on CPU4
- [ 0.016188] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.016202] GICv3: CPU4: using allocated LPI pending table @0x00000000f6d80000
- [ 0.016240] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.017449] Detected PIPT I-cache on CPU5
- [ 0.017487] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.017501] GICv3: CPU5: using allocated LPI pending table @0x00000000f6d90000
- [ 0.017540] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.017709] smp: Brought up 1 node, 6 CPUs
- [ 0.017792] SMP: Total of 6 processors activated.
- [ 0.017805] CPU features: detected: 32-bit EL0 Support
- [ 0.017817] CPU features: detected: CRC32 instructions
- [ 0.017829] CPU features: detected: 32-bit EL1 Support
- [ 0.044933] CPU: All CPU(s) started at EL2
- [ 0.045007] alternatives: patching kernel code
- [ 0.048832] devtmpfs: initialized
- [ 0.065297] Registered cp15_barrier emulation handler
- [ 0.065322] Registered setend emulation handler
- [ 0.066186] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.066260] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.069508] xor: measuring software checksum speed
- [ 0.107944] 8regs : 2345.000 MB/sec
- [ 0.148034] 32regs : 2757.000 MB/sec
- [ 0.188125] arm64_neon: 2278.000 MB/sec
- [ 0.188133] xor: using function: 32regs (2757.000 MB/sec)
- [ 0.188191] pinctrl core: initialized pinctrl subsystem
- [ 0.188875] DMI not present or invalid.
- [ 0.189478] NET: Registered protocol family 16
- [ 0.192559] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
- [ 0.194021] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.194801] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.194911] audit: initializing netlink subsys (disabled)
- [ 0.195212] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
- [ 0.196454] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.196458] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.196468] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.196477] thermal_sys: Registered thermal governor 'user_space'
- [ 0.197003] cpuidle: using governor menu
- [ 0.197351] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.197579] ASID allocator initialised with 65536 entries
- [ 0.198854] Serial: AMBA PL011 UART driver
- [ 0.266240] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.266255] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.266265] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.266275] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.272305] cryptd: max_cpu_qlen set to 1000
- [ 0.348570] raid6: neonx8 gen() 1667 MB/s
- [ 0.416728] raid6: neonx8 xor() 1225 MB/s
- [ 0.484893] raid6: neonx4 gen() 1684 MB/s
- [ 0.553051] raid6: neonx4 xor() 1266 MB/s
- [ 0.621211] raid6: neonx2 gen() 1507 MB/s
- [ 0.689370] raid6: neonx2 xor() 1161 MB/s
- [ 0.757534] raid6: neonx1 gen() 1175 MB/s
- [ 0.825699] raid6: neonx1 xor() 933 MB/s
- [ 0.893902] raid6: int64x8 gen() 997 MB/s
- [ 0.962108] raid6: int64x8 xor() 392 MB/s
- [ 1.030233] raid6: int64x4 gen() 986 MB/s
- [ 1.098393] raid6: int64x4 xor() 589 MB/s
- [ 1.166550] raid6: int64x2 gen() 927 MB/s
- [ 1.234709] raid6: int64x2 xor() 522 MB/s
- [ 1.302866] raid6: int64x1 gen() 723 MB/s
- [ 1.371009] raid6: int64x1 xor() 389 MB/s
- [ 1.371018] raid6: using algorithm neonx4 gen() 1684 MB/s
- [ 1.371025] raid6: .... xor() 1266 MB/s, rmw enabled
- [ 1.371032] raid6: using neon recovery algorithm
- [ 1.372586] vcc12v_dcin_bkup: supplied by vcc12v_dcin
- [ 1.373025] vcc12v_hdd: supplied by vcc12v_dcin_bkup
- [ 1.389523] vcc5v0_perdev: supplied by vcc12v_dcin_bkup
- [ 1.390002] pcie_power: supplied by vcc5v0_perdev
- [ 1.390115] vcc5v0_usb: supplied by vcc5v0_perdev
- [ 1.390192] vcc5v0_typec: supplied by vcc5v0_usb
- [ 1.390273] vcc5v0_hdd: supplied by vcc12v_dcin_bkup
- [ 1.390904] vcc5v0_sys: supplied by vcc12v_dcin_bkup
- [ 1.391435] vcc3v3_sys_s3: supplied by vcc5v0_sys
- [ 1.391517] vcc0v9_s3: supplied by vcc3v3_sys_s3
- [ 1.391605] avdd_1v8_s0: supplied by vcc3v3_sys_s3
- [ 1.391675] vcc3v0_sd: supplied by vcc3v3_sys_s3
- [ 1.392672] usblan_power: supplied by vcc5v0_usb
- [ 1.393270] iommu: Default domain type: Translated
- [ 1.396715] vgaarb: loaded
- [ 1.397259] SCSI subsystem initialized
- [ 1.397517] libata version 3.00 loaded.
- [ 1.397782] usbcore: registered new interface driver usbfs
- [ 1.397831] usbcore: registered new interface driver hub
- [ 1.397934] usbcore: registered new device driver usb
- [ 1.398661] pps_core: LinuxPPS API ver. 1 registered
- [ 1.398670] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.398688] PTP clock support registered
- [ 1.399020] EDAC MC: Ver: 3.0.0
- [ 1.400238] NetLabel: Initializing
- [ 1.400248] NetLabel: domain hash size = 128
- [ 1.400255] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.400324] NetLabel: unlabeled traffic allowed by default
- [ 1.400867] clocksource: Switched to clocksource arch_sys_counter
- [ 1.526621] VFS: Disk quotas dquot_6.6.0
- [ 1.526703] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.527575] AppArmor: AppArmor Filesystem Enabled
- [ 1.536413] NET: Registered protocol family 2
- [ 1.537333] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 1.537513] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 1.538047] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 1.538715] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.538912] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.539089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.539436] NET: Registered protocol family 1
- [ 1.539470] NET: Registered protocol family 44
- [ 1.539486] PCI: CLS 0 bytes, default 64
- [ 1.539732] Trying to unpack rootfs image as initramfs...
- [ 2.700612] Freeing initrd memory: 15804K
- [ 2.701970] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 2.702416] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 2.703116] kvm [1]: IPA Size Limit: 40bits
- [ 2.703904] kvm [1]: vgic-v2@fff20000
- [ 2.703942] kvm [1]: GIC system register CPU interface enabled
- [ 2.704187] kvm [1]: vgic interrupt IRQ10
- [ 2.704479] kvm [1]: Hyp mode initialized successfully
- [ 2.715823] Initialise system trusted keyrings
- [ 2.715878] Key type blacklist registered
- [ 2.716086] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 2.722744] zbud: loaded
- [ 2.724402] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.725364] fuse: init (API version 7.31)
- [ 2.726751] integrity: Platform Keyring initialized
- [ 2.789049] Key type asymmetric registered
- [ 2.789060] Asymmetric key parser 'x509' registered
- [ 2.789112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 2.789330] io scheduler mq-deadline registered
- [ 2.789340] io scheduler kyber registered
- [ 2.789482] io scheduler bfq registered
- [ 2.807886] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
- [ 2.807919] OF: /pcie@f8000000: Missing device_type
- [ 2.807953] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
- [ 2.807978] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
- [ 2.816959] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 2.816976] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
- [ 2.818461] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 2.818475] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- [ 2.823201] vdd_log: supplied by regulator-dummy
- [ 2.824595] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 2.827779] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
- [ 2.828833] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
- [ 2.949476] printk: console [ttyS2] enabled
- [ 2.951207] Serial: AMBA driver
- [ 2.953031] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 2.965658] loop: module loaded
- [ 2.974782] libphy: Fixed MDIO Bus: probed
- [ 2.975493] tun: Universal TUN/TAP device driver, 1.6
- [ 2.977112] thunder_xcv, ver 1.0
- [ 2.977443] thunder_bgx, ver 1.0
- [ 2.977770] nicpf, ver 1.0
- [ 2.979177] e1000e: Intel(R) PRO/1000 Network Driver
- [ 2.979617] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 2.980181] igb: Intel(R) Gigabit Ethernet Network Driver
- [ 2.980656] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 2.981208] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- [ 2.981758] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 2.982572] sky2: driver version 1.30
- [ 2.983634] VFIO - User Level meta-driver version: 0.3
- [ 3.003502] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.004097] ehci-pci: EHCI PCI platform driver
- [ 3.004525] ehci-platform: EHCI generic platform driver
- [ 3.007454] ehci-platform fe380000.usb: EHCI Host Controller
- [ 3.007974] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
- [ 3.009033] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
- [ 3.024889] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 3.025694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
- [ 3.026423] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.027060] usb usb1: Product: EHCI Host Controller
- [ 3.027493] usb usb1: Manufacturer: Linux 5.9.14-rockchip64 ehci_hcd
- [ 3.028054] usb usb1: SerialNumber: fe380000.usb
- [ 3.029056] hub 1-0:1.0: USB hub found
- [ 3.029428] hub 1-0:1.0: 1 port detected
- [ 3.030559] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.031119] ohci-pci: OHCI PCI platform driver
- [ 3.031563] ohci-platform: OHCI generic platform driver
- [ 3.032379] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 3.033012] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 2
- [ 3.033821] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
- [ 3.097100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.09
- [ 3.097829] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.098466] usb usb2: Product: Generic Platform OHCI controller
- [ 3.098989] usb usb2: Manufacturer: Linux 5.9.14-rockchip64 ohci_hcd
- [ 3.099550] usb usb2: SerialNumber: fe3a0000.usb
- [ 3.100465] hub 2-0:1.0: USB hub found
- [ 3.100836] hub 2-0:1.0: 1 port detected
- [ 3.102756] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.103258] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
- [ 3.104101] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 3.105011] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe900000
- [ 3.105961] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
- [ 3.106690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.107326] usb usb3: Product: xHCI Host Controller
- [ 3.107761] usb usb3: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
- [ 3.108322] usb usb3: SerialNumber: xhci-hcd.0.auto
- [ 3.109327] hub 3-0:1.0: USB hub found
- [ 3.109697] hub 3-0:1.0: 1 port detected
- [ 3.110387] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.110882] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
- [ 3.111565] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 3.112216] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.113099] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
- [ 3.113826] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.114462] usb usb4: Product: xHCI Host Controller
- [ 3.114894] usb usb4: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
- [ 3.115455] usb usb4: SerialNumber: xhci-hcd.0.auto
- [ 3.116387] hub 4-0:1.0: USB hub found
- [ 3.116754] hub 4-0:1.0: 1 port detected
- [ 3.117664] usbcore: registered new interface driver usb-storage
- [ 3.120780] mousedev: PS/2 mouse device common for all mice
- [ 3.122705] i2c /dev entries driver
- [ 3.126979] pca953x 2-0020: using no AI
- [ 3.137678] rk808 0-001b: chip id: 0x0
- [ 3.141978] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 3.142550] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 3.144225] vdd_center: supplied by vcc5v0_sys
- [ 3.145289] vdd_cpu_l: supplied by vcc5v0_sys
- [ 3.146016] vcc_ddr_s3: supplied by vcc5v0_sys
- [ 3.147089] vcc1v8_sys_s3: supplied by vcc5v0_sys
- [ 3.147997] vcc1v8_dvp: supplied by vcc5v0_sys
- [ 3.148907] vcc3v0_touch: supplied by vcc5v0_sys
- [ 3.150812] vcc1v8_s3: supplied by vcc5v0_sys
- [ 3.151487] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
- [ 3.153189] vcc_sdio_s0: supplied by vcc5v0_sys
- [ 3.154085] vcca3v0_codec: supplied by vcc5v0_sys
- [ 3.155726] vcc1v5_s3: supplied by vcc5v0_sys
- [ 3.156617] vcca1v8_codec: supplied by vcc5v0_sys
- [ 3.158270] vcc3v0_s3: supplied by vcc5v0_sys
- [ 3.158807] vcc3v3_sys_s0: failed to get the current voltage(-517)
- [ 3.159366] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3
- [ 3.160340] vcc3v3_s0: supplied by vcc3v3_sys_s3
- [ 3.164427] rk808-rtc rk808-rtc: registered as rtc0
- [ 3.165443] rk808-rtc rk808-rtc: setting system clock to 2021-02-04T15:17:04 UTC (1612451824)
- [ 3.169273] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 3.171007] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
- [ 3.171535] avdd_0v9_s0: supplied by vcc1v8_sys_s3
- [ 3.172066] vdd_cpu_b: supplied by vcc5v0_sys
- [ 3.175505] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- [ 3.177255] vdd_gpu: supplied by vcc5v0_sys
- [ 3.187005] dw_wdt ff848000.watchdog: No valid TOPs array specified
- [ 3.189494] sdhci: Secure Digital Host Controller Interface driver
- [ 3.190040] sdhci: Copyright(c) Pierre Ossman
- [ 3.190448] Synopsys Designware Multimedia Card Interface Driver
- [ 3.192678] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
- [ 3.193421] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
- [ 3.194014] dwmmc_rockchip fe320000.mmc: Version ID is 270a
- [ 3.194564] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
- [ 3.195879] dwmmc_rockchip fe320000.mmc: Got CD GPIO
- [ 3.209044] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 3.222028] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.224396] mmc1: CQHCI version 5.10
- [ 3.228835] random: fast init done
- [ 3.249527] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
- [ 3.254847] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.256638] hid: raw HID events driver (C) Jiri Kosina
- [ 3.257337] usbcore: registered new interface driver usbhid
- [ 3.257856] usbhid: USB HID core driver
- [ 3.264176] drop_monitor: Initializing network drop monitor service
- [ 3.265748] NET: Registered protocol family 10
- [ 3.272743] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
- [ 3.322026] mmc1: Command Queue Engine enabled
- [ 3.322436] mmc1: new HS200 MMC card at address 0001
- [ 3.323596] Segment Routing with IPv6
- [ 3.323677] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
- [ 3.324029] NET: Registered protocol family 17
- [ 3.324566] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
- [ 3.324967] 8021q: 802.1Q VLAN Support v1.8
- [ 3.325501] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
- [ 3.325733] Key type dns_resolver registered
- [ 3.326318] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB, chardev (243:0)
- [ 3.327624] registered taskstats version 1
- [ 3.328006] Loading compiled-in X.509 certificates
- [ 3.334498] Loaded X.509 cert 'Build time autogenerated kernel key: dccf44bd6a6a6c80c8ebb43ecbfc03e645b516d0'
- [ 3.335612] zswap: loaded using pool lzo/zbud
- [ 3.336489] Key type ._fscrypt registered
- [ 3.336881] Key type .fscrypt registered
- [ 3.337233] Key type fscrypt-provisioning registered
- [ 3.340896] Btrfs loaded, crc32c=crc32c-generic
- [ 3.367874] Key type encrypted registered
- [ 3.368265] AppArmor: AppArmor sha1 policy hashing enabled
- [ 3.430906] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
- [ 3.431567] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
- [ 3.432323] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
- [ 3.444902] usb 3-1: new high-speed USB device number 2 using xhci-hcd
- [ 3.490171] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
- [ 3.490762] pci_bus 0000:00: root bus resource [bus 00-1f]
- [ 3.491251] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
- [ 3.491861] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
- [ 3.492747] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
- [ 3.493440] pci 0000:00:00.0: supports D1
- [ 3.493801] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 3.499850] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 3.500801] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
- [ 3.501414] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
- [ 3.502036] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
- [ 3.502542] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
- [ 3.503163] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
- [ 3.503669] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
- [ 3.504291] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
- [ 3.504796] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
- [ 3.505430] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
- [ 3.505936] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
- [ 3.506557] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
- [ 3.507062] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
- [ 3.507644] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 3.508265] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
- [ 3.509212] pci 0000:01:00.0: PME# supported from D3hot
- [ 3.509917] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
- [ 3.516568] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
- [ 3.517190] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
- [ 3.517805] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
- [ 3.518443] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
- [ 3.519055] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
- [ 3.519610] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
- [ 3.520193] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
- [ 3.520746] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
- [ 3.521344] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
- [ 3.521896] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
- [ 3.522480] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
- [ 3.523033] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
- [ 3.523616] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
- [ 3.524169] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
- [ 3.524754] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.525212] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
- [ 3.526053] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
- [ 3.526896] pcieport 0000:00:00.0: PME: Signaling with IRQ 239
- [ 3.527779] pcieport 0000:00:00.0: AER: enabled with IRQ 239
- [ 3.528606] ahci 0000:01:00.0: version 3.0
- [ 3.529016] ahci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 3.530106] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 3.530782] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
- [ 3.531505] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
- [ 3.536163] scsi host0: ahci
- [ 3.537176] scsi host1: ahci
- [ 3.538038] scsi host2: ahci
- [ 3.538901] scsi host3: ahci
- [ 3.539759] scsi host4: ahci
- [ 3.540239] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 240
- [ 3.540929] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 241
- [ 3.541587] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 242
- [ 3.542246] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 243
- [ 3.542905] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 244
- [ 3.549929] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 3.552899] of_cfs_init
- [ 3.553158] of_cfs_init: OK
- [ 3.554796] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
- [ 3.594927] usb 3-1: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04
- [ 3.595650] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.596281] usb 3-1: Product: USB2.0 Hub
- [ 3.596729] usb 3-1: Manufacturer: VIA Labs, Inc.
- [ 3.647585] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 153
- [ 3.648197] mmc0: new ultra high speed SDR104 SDHC card at address 0001
- [ 3.649922] mmcblk0: mmc0:0001 SD 29.1 GiB
- [ 3.653718] mmcblk0: p1
- [ 3.656530] hub 3-1:1.0: USB hub found
- [ 3.657089] hub 3-1:1.0: 4 ports detected
- [ 3.721090] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 3.870129] usb 4-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
- [ 3.870853] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.871483] usb 4-1: Product: USB3.0 Hub
- [ 3.871932] usb 4-1: Manufacturer: VIA Labs, Inc.
- [ 3.896504] hub 4-1:1.0: USB hub found
- [ 3.896990] hub 4-1:1.0: 4 ports detected
- [ 4.536968] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 4.557914] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
- [ 4.558652] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
- [ 4.559297] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
- [ 4.559754] usb 4-1.4: Manufacturer: Realtek
- [ 4.560134] usb 4-1.4: SerialNumber: 000000001
- [ 5.152923] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.155280] ata1.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133
- [ 5.155900] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 5.158073] ata1.00: configured for UDMA/133
- [ 5.158997] scsi 0:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5
- [ 5.161702] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [ 5.162477] sd 0:0:0:0: [sda] Write Protect is off
- [ 5.162911] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 5.163493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.177952] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 5.636922] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.638998] ata2.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133
- [ 5.639617] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 5.641798] ata2.00: configured for UDMA/133
- [ 5.642763] scsi 1:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5
- [ 5.644775] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [ 5.645637] sd 1:0:0:0: [sdb] Write Protect is off
- [ 5.646073] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 5.646636] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.656954] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 6.120921] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 6.123011] ata3.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133
- [ 6.123631] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 6.125816] ata3.00: configured for UDMA/133
- [ 6.126766] scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5
- [ 6.128840] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [ 6.129622] sd 2:0:0:0: [sdc] Write Protect is off
- [ 6.130058] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 6.130623] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.146188] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 6.604921] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 6.607009] ata4.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133
- [ 6.607628] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 6.609793] ata4.00: configured for UDMA/133
- [ 6.610704] scsi 3:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5
- [ 6.612811] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [ 6.613599] sd 3:0:0:0: [sdd] Write Protect is off
- [ 6.614035] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 6.614597] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.625484] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 7.088921] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 7.090986] ata5.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133
- [ 7.091604] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 7.093743] ata5.00: configured for UDMA/133
- [ 7.094716] scsi 4:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5
- [ 7.096819] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [ 7.097659] sd 4:0:0:0: [sde] Write Protect is off
- [ 7.098095] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
- [ 7.098657] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.108015] sd 4:0:0:0: [sde] Attached SCSI disk
- [ 7.111321] Freeing unused kernel memory: 4224K
- [ 7.125032] Run /init as init process
- [ 7.125363] with arguments:
- [ 7.125629] /init
- [ 7.125836] earlyprintk
- [ 7.126087] with environment:
- [ 7.126368] HOME=/
- [ 7.126582] TERM=linux
- [ 7.126825] ubootpart=e950b4fc-01
- [ 7.127150] cgroup_enable=memory
- [ 7.127467] cgroup_memory=1
- Loading, please wait...
- Starting version 241
- [ 7.735621] input: adc-keys as /devices/platform/adc-keys/input/input1
- [ 7.846689] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
- [ 7.847284] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
- [ 7.849385] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 7.850164] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 7.850792] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 7.851295] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 7.851804] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 7.852435] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
- [ 7.853337] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 7.858906] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 7.859771] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 7.860433] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 7.860925] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
- [ 7.861585] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
- [ 7.862243] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 7.862705] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 7.863325] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 7.864002] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 7.864531] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 7.865098] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 7.998032] async_tx: api initialized (async)
- [ 8.023675] libphy: stmmac: probed
- [ 8.024027] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
- [ 8.025222] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
- [ 8.047397] md/raid:md127: device sda operational as raid disk 0
- [ 8.047944] md/raid:md127: device sdd operational as raid disk 3
- [ 8.048478] md/raid:md127: device sdc operational as raid disk 2
- [ 8.049052] md/raid:md127: device sde operational as raid disk 4
- [ 8.049589] md/raid:md127: device sdb operational as raid disk 1
- [ 8.074820] md/raid:md127: raid level 5 active with 5 out of 5 devices, algorithm 2
- [ 8.075954] random: crng init done
- [ 8.094350] md127: detected capacity change from 0 to 8001054310400
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.33.1
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
- /dev/mmcblk0p1: recovering journal
- /dev/mmcblk0p1 contains a file system with errors, check forced.
- /dev/mmcblk0p1: 70377/1848000 files (0.2% non-contiguous), 663890/7559564 blocks
- fsck exited with status code 1
- done.
- [ 20.125814] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... /scripts/local-bottom/mdadm: 2: /scripts/local-bottom/mdadm: rm: not found
- done.
- Begin: Running /scripts/init-bottom ... done.
- [ 20.793340] systemd[1]: Inserted module 'autofs4'
- [ 20.839292] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 20.842182] systemd[1]: Detected architecture arm64.
- Welcome to Armbian 20.11.6 Buster!
- [ 20.871058] systemd[1]: Set hostname to <openmediavault>.
- [ 21.648100] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
- [ 21.675417] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
- [ 21.709450] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
- [ 21.742817] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
- [ 21.873858] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ 21.885848] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 21.897944] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ OK ] Listening on udev Control Socket.
- Mounting Kernel Debug File System...
- [ OK ] Created slice User and Session Slice.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on Network Service Netlink Socket.
- [ OK ] Reached target Swap.
- [ OK ] Listening on Journal Socket (/dev/log).
- Starting Create list of re…odes for the current kernel...
- Starting Nameserver information manager...
- Starting Load Kernel Modules...
- Mounting NFSD configuration filesystem...
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ OK ] Reached target Paths.
- [ 22.102521] lm75 2-004c: hwmon2: sensor 'lm75'
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Listening on LVM2 poll daemon socket.
- [ OK ] Created slice system-systemd\x2dfsck.slice.
- [ OK ] Created slice system-getty.slice.
- Starting Availability of block devices...
- [ OK ] Reached target Slices.
- [ 22.197861] RPC: Registered named UNIX socket transport module.
- [ 22.198391] RPC: Registered udp transport module.
- [ 22.198808] RPC: Registered tcp transport module.
- [ 22.199225] RPC: Registered tcp NFSv4.1 backchannel transport module.
- Mounting POSIX Message Queue File System...
- [ OK ] Listening on initctl Compatibility Named Pipe.
- Starting udev Coldplug all Devices...
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Listening on Device-mapper event daemon FIFOs.
- [ 22.281275] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ OK ] Listening on RPCbind Server Activation Socket.
- Starting Monitoring of LVM…meventd or progress polling...
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting Remount Root and Kernel File Systems...
- Mounting RPC Pipe File System...
- Mounting Huge Pages File System...
- Starting Set the console keyboard layout...
- [ OK ] Mounted Kernel Debug File System.
- [ 22.394043] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
- [ OK ] Started Create list of req… nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Mounted NFSD configuration filesystem.
- [ OK ] Started Availability of block devices.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Monitoring of LVM2… dmeventd or progress polling.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Mounted RPC Pipe File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Nameserver information manager.
- Starting pNFS block layout mapping daemon...
- Starting Create System Users...
- Starting Load/Save Random Seed...
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- Mounting FUSE Control File System...
- [ OK ] Started pNFS block layout mapping daemon.
- [ OK ] Started Create System Users.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Mounted FUSE Control File System.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- Mounting Mount /tmp as tmp…e access to the root device...
- [ OK ] Mounted Mount /tmp as tmpf…ite access to the root device.
- [ OK ] Reached target Local File Systems.
- Starting Preprocess NFS configuration...
- Starting Cleanup PHP session files...
- Starting Cleanup monit state file...
- Starting Set console font and keymap...
- Starting Armbian ZRAM config...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Preprocess NFS configuration.
- [ OK ] Started Cleanup PHP session files.
- [ OK ] Started Cleanup monit state file.
- [ OK ] Started Set console font and keymap.
- Starting NFSv4 ID-name mapping service...
- [ OK ] Reached target NFS client services.
- Starting Helper to synchronize boot up for ifupdown...
- Starting Network Service...
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- [ OK ] Started NFSv4 ID-name mapping service.
- Starting Raise network interfaces...
- [ 23.413433] zram: Added device: zram0
- [ 23.414402] zram: Added device: zram1
- [ 23.415346] zram: Added device: zram2
- [ OK ] Started Network Service.
- [ 23.468775] input: beeper as /devices/platform/beeper/input/input2
- Starting Wait for Network to be Configured...
- [ OK ] Found device /dev/ttyS2.
- [ 23.575155] zram0: detected capacity change from 0 to 1992257536
- [ 23.579689] mc: Linux media interface: v0.10
- [ 23.613202] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 23.613971] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 23.614709] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 23.615426] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 23.616092] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 23.669565] Adding 1945560k swap on /dev/zram0. Priority:5 extents:1 across:1945560k SSFS
- [ 23.688501] videodev: Linux video capture interface: v2.00
- [ 23.733237] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
- [ 23.745669] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
- [ 23.758856] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 23.759385] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
- [ 23.760304] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 23.761206] xhci-hcd xhci-hcd.2.auto: irq 227, io mem 0xfe800000
- [ 23.762640] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
- [ 23.763457] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 23.764157] usb usb5: Product: xHCI Host Controller
- [ 23.764595] usb usb5: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
- [ 23.765208] usb usb5: SerialNumber: xhci-hcd.2.auto
- [ 23.772261] hub 5-0:1.0: USB hub found
- [ 23.772632] hub 5-0:1.0: 1 port detected
- [ 23.773413] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 23.773966] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
- [ 23.774672] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
- [ 23.777563] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 23.778096] rockchip-vop ff8f0000.vop: Adding to iommu group 2
- [ 23.778456] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
- [ 23.779515] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 23.780148] usb usb6: Product: xHCI Host Controller
- [ 23.780576] usb usb6: Manufacturer: Linux 5.9.14-rockchip64 xhci-hcd
- [ 23.783217] usb usb6: SerialNumber: xhci-hcd.2.auto
- [ 23.785270] hub 6-0:1.0: USB hub found
- [ 23.790738] hub 6-0:1.0: 1 port detected
- [ 23.796646] panfrost ff9a0000.gpu: clock rate = 500000000
- [ 23.798709] rockchip-vop ff900000.vop: Adding to iommu group 3
- [ 23.826221] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
- [ 23.826914] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
- [ 23.845102] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
- [ 23.846146] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
- [ 23.856230] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
- [ 23.857277] [drm] unsupported AFBC format[3231564e]
- [ 23.859842] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
- [ OK ] Started Raise network interfaces.
- [ 23.863580] rkvdec ff660000.video-codec: Adding to iommu group 1
- [ 23.870286] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
- [ 23.871820] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
- [ 23.872315] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 23.873740] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
- [ 23.874120] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
- [ 23.877386] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
- [ 23.889236] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
- [ 23.893053] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video1
- [ 23.907706] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
- [ 23.911368] hantro-vpu ff650000.video-codec: Adding to iommu group 0
- [ 23.917848] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
- [ 23.920785] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
- [ 23.930608] zram1: detected capacity change from 0 to 52428800
- [ OK ] Started Armbian ZRAM config.
- [ 24.057813] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
- [ 24.136459] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- Starting Armbian memory supported logging...
- [ OK ] Found device /dev/disk/by-…c-c39e-45d2-845d-5107f237f6a9.
- [ 24.277471] r8152 4-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
- [ 24.279940] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
- [ 24.280605] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
- [ OK ] Started MD array monitor.
- [ 24.301022] r8152 4-1.4:1.0 eth1: v2.14.0 (2020/09/24)
- [ 24.301480] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
- [ 24.301480] US6,570,884, US6,115,776, and US6,327,625.
- [ 24.301480]
- [ 24.302971] usbcore: registered new interface driver r8152
- [ 24.305083] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
- Starting File System Check…c39e-45d2-845d-5107f237f6a9...
- [ OK ] Started File System Check Daemon to report status.
- [ 24.897020] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
- [ OK ] Started File System Check …c-c39e-45d2-845d-5107f237f6a9.
- Mounting /srv/dev-disk-by-…c39e-45d2-845d-5107f237f6a9...
- [ 25.206738] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
- [ 25.220036] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
- [ OK ] Mounted /srv/dev-disk-by-u…c-c39e-45d2-845d-5107f237f6a9.
- Starting File System Quota Check...
- [ OK ] Started File System Quota Check.
- Starting Enable File System Quotas...
- [ OK ] Started Enable File System Quotas.
- [ 26.689490] systemd[1]: Started Armbian memory supported logging.
- [ OK ] Started Armbian memory supported logging.
- [ 26.710358] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ 26.874858] systemd[1]: Started Journal Service.
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ 26.942424] systemd-journald[802]: Received request to flush runtime journal from PID 1
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Reached target System Time Synchronized.
- Starting RPC bind portmap service...
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- [ OK ] Started RPC bind portmap service.
- [ OK ] Reached target RPC Port Mapper.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Clean PHP session files every 30 mins.
- Starting Armbian hardware optimization...
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started Daily man-db regeneration.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Started Trigger anacron every hour.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started Discard unused blocks once a week.
- [ OK ] Reached target Timers.
- Starting Armbian hardware monitoring...
- [ OK ] Started Armbian hardware optimization.
- [ OK ] Started Armbian hardware monitoring.
- [ OK ] Reached target Basic System.
- [ OK ] Started Run anacron jobs.
- Starting Clean php session files...
- [ OK ] Started Self Monitoring an…ing Technology (SMART) Daemon.
- Starting Login Service...
- [ OK ] Started D-Bus System Message Bus.
- Starting WPA supplicant...
- Starting fan speed regulator...
- Starting Resets System Activity Data Collector...
- Starting Network Manager...
- Starting System Logging Service...
- Starting Dispatcher daemon for systemd-networkd...
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Started System Logging Service.
- [ OK ] Started fan speed regulator.
- [ OK ] Started Login Service.
- [ OK ] Started WPA supplicant.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- [ OK ] Started Unattended Upgrades Shutdown.
- Starting The OpenMediaVaul…t processes the RPC request...
- Starting NFS Mount Daemon...
- Starting OpenBSD Secure Shell server...
- Starting The PHP 7.3 FastCGI Process Manager...
- Starting Hostname Service...
- [ OK ] Started NFS Mount Daemon.
- [FAILED] Failed to start The OpenMe…hat processes the RPC request.
- See 'systemctl status openmediavault-engined.service' for details.
- Starting NFS server and services...
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Hostname Service.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
- [ OK ] Started Clean php session files.
- [ OK ] Started The PHP 7.3 FastCGI Process Manager.
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ 28.959702] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
- [ 28.964629] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
- [ 28.965441] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
- [ 28.966620] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
- [ OK ] Started Dispatcher daemon for systemd-networkd.
- Starting Network Name Resolution...
- Starting Authorization Manager...
- [ OK ] Started Authorization Manager.
- [ OK ] Started Network Name Resolution.
- [ OK ] Reached target Host and Network Name Lookups.
- [ 29.795569] NFSD: Using UMH upcall client tracking operations.
- [ 29.796095] NFSD: starting 90-second grace period (net f00000a1)
- [ OK ] Started NFS server and services.
- [ OK ] Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems.
- Starting LSB: service and resource monitoring daemon...
- Starting LSB: Load kernel …d to enable cpufreq scaling...
- [ OK ] Started Regular background program processing daemon.
- Starting rng-tools.service...
- Starting Permit User Sessions...
- [ OK ] Started rng-tools.service.
- [ OK ] Started Permit User Sessions.
- [FAILED] Failed to start LSB: servi…nd resource monitoring daemon.
- See 'systemctl status monit.service' for details.
- [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- [ 33.057730] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 33.058528] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ OK ] Started Wait for Network to be Configured.
- [ OK ] Reached target Network is Online.
- Starting LSB: start or stop rrdcached...
- Starting Samba NMB Daemon...
- Starting LSB: Starts ProFTPD daemon...
- [ OK ] Started Web Services Dynamic Discovery host daemon.
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting /etc/rc.local Compatibility...
- Starting Generate the prelogin message...
- [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyS2.
- [ 33.760936] vcc5v0_typec: disabling
- [ OK ] Started LSB: start or stop rrdcached.
- Starting Statistics collection and monitoring daemon...
- [ OK ] Started Statistics collection and monitoring daemon.
- [ OK ] Started Samba NMB Daemon.
- Starting Samba SMB Daemon...
- [ OK ] Started Samba SMB Daemon.
- [ OK ] Started LSB: Starts ProFTPD daemon.
- openmediavault 5.5.23-1 (Usul) openmediavault ttyS2
- Copyright (C) 2009-2021 by Volker Theile. All rights reserved.
- To manage the system visit the openmediavault web control panel:
- eth0: 192.168.1.230
- eth0: fe80::872:3b74:d55b:c24e
- By default the web control panel administrator account has the
- username 'admin' and password 'openmediavault'.
- It is recommended that you change the password for this account
- within the web control panel or using the 'omv-firstaid' CLI
- command.
- For more information regarding this appliance, please visit the
- web site: https://www.openmediavault.org
- openmediavault login: [ 48.862066] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 48.862815] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
Add Comment
Please, Sign In to add comment