dep-mtasst-titansim-569584c84b-tnjng system_test/eSIPp# at4st genscripts MMT MTAS-CBA-32-6 sekilxc1234_eth0 sekilxc1235_eth0 sekilxc1236_eth0

Setup file ./setup.pl is ready!
HINT: if you need special configuration, you can always open the setup file, do the change and create the scripts manually by running the command again or '> perl createScripts.pl setup.pl' !

Continue to create scripts now? [y/n] : y
[STFW][INFO][2019-10-15 09:34:24] Loading configuration file '/local/scratch/root/st/system_test/eSIPp/setup_template/common_setup.pl'...
[STFW][INFO][2019-10-15 09:34:24] Loading configuration file '/local/scratch/root/st/system_test/eSIPp/setup.pl'...
[STFW][INFO][2019-10-15 09:34:24] Checking common configuration...
[STFW][INFO][2019-10-15 09:34:24] Using profile 'ESipp::Profiles::MMT::Profile'
[STFW][INFO][2019-10-15 09:34:25] Parsing Node information
[STFW][INFO][2019-10-15 09:34:25] Architecture: MTAS/Cloud CBA/BSP
[STFW][INFO][2019-10-15 09:34:25] Node: MTAS-CBA-32-6
[STFW][INFO][2019-10-15 09:34:25] Node Type: vBSP_2SC_2PL_4vCPU/PL
[STFW][INFO][2019-10-15 09:34:25] NSP Type: vBSP-GEP5-OS_KVM
[STFW][INFO][2019-10-15 09:34:25] Traffic VIP: 10.80.100.185
[STFW][INFO][2019-10-15 09:34:25] OAM VIP: 10.80.100.184
[STFW][INFO][2019-10-15 09:34:25] Traffic VIP6: 2001:1b70:8294:3d00::3261
[STFW][INFO][2019-10-15 09:34:25] OAM VIP6: 2001:1b70:8294:3d00::3260
[STFW][INFO][2019-10-15 09:34:25] io1: 10.80.68.101
[STFW][INFO][2019-10-15 09:34:25] io2: 10.80.68.102
[STFW][INFO][2019-10-15 09:34:25] Extra VIP1: 10.80.100.186
[STFW][INFO][2019-10-15 09:34:25] Extra VIP2: 10.80.100.187
[STFW][INFO][2019-10-15 09:34:25] Extra VIP3: 10.80.100.188
[STFW][INFO][2019-10-15 09:34:25] Extra VIP4: 10.80.100.189
[STFW][INFO][2019-10-15 09:34:26] Traffic Separation Profile: profile1
[STFW][INFO][2019-10-15 09:34:26] Parsing IP addresses for LoadPCs
Device "eth1" does not exist.
[STFW][ERROR][2019-10-15 09:34:26] Halt is called: LoadPC 192.168.6.18 does NOT have IPV6 address (Scope: Global)!
[STFW][ERROR][2019-10-15 09:34:26] 4: eth0@if18: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue state UP
[STFW][ERROR][2019-10-15 09:34:26] link/ether 4e:72:cd:81:dd:b1 brd ff:ff:ff:ff:ff:ff
[STFW][ERROR][2019-10-15 09:34:26] inet 192.168.6.18/32 scope global eth0
[STFW][ERROR][2019-10-15 09:34:26] valid_lft forever preferred_lft forever
[STFW][ERROR][2019-10-15 09:34:26]
[STFW][ERROR][2019-10-15 09:34:26]
[STFW][ERROR][2019-10-15 09:34:26] *** Script generation FAILED!! Please fix the problem and run the command again! ***
Internal state is dumped into 'dump.txt'
Stopping: LoadPC 192.168.6.18 does NOT have IPV6 address (Scope: Global)!
4: eth0@if18: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue state UP
link/ether 4e:72:cd:81:dd:b1 brd ff:ff:ff:ff:ff:ff
inet 192.168.6.18/32 scope global eth0
valid_lft forever preferred_lft forever