Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Blue (SATA)
- Device Model: WDC WD5000AAKS-75A7B2
- Serial Number: WD-WCASY7835964
- LU WWN Device Id: 5 0014ee 1acb275dc
- Firmware Version: 01.03B01
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database 7.3/5319
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.5, 3.0 Gb/s
- Local Time is: Fri Sep 23 18:22:07 2022 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM level is: 128 (quiet), recommended: 128
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (11160) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 131) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 12
- 3 Spin_Up_Time POS--K 212 160 021 - 2358
- 4 Start_Stop_Count -O--CK 095 095 000 - 5542
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 064 064 000 - 26397
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 096 096 000 - 4672
- 192 Power-Off_Retract_Count -O--CK 198 198 000 - 1573
- 193 Load_Cycle_Count -O--CK 199 199 000 - 5392
- 194 Temperature_Celsius -O---K 116 096 000 - 31
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 15
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 4
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- 240 Head_Flying_Hours -O--CK 065 065 000 - 25713
- 241 Total_LBAs_Written -O--CK 200 200 000 - 200386287727
- 242 Total_LBAs_Read -O--CK 200 200 000 - 87347902661
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 6102 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 6102 [5] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 28 00 00 02 41 0d 28 40 08 00:00:06.185 READ FPDMA QUEUED
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:00:06.184 SET FEATURES [Enable SATA feature]
- ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:00:06.184 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:06.184 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:06.183 IDENTIFY DEVICE
- Error 6101 [4] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 68 00 00 02 41 0d 28 40 08 00:00:11.441 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:11.440 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:11.440 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:11.440 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:11.439 SET FEATURES [Set transfer mode]
- Error 6100 [3] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 b8 00 00 02 41 0d 28 40 08 00:00:09.098 READ FPDMA QUEUED
- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.062 FLUSH CACHE EXT
- 61 00 08 00 b0 00 00 00 00 08 00 40 08 00:00:09.061 WRITE FPDMA QUEUED
- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.055 FLUSH CACHE EXT
- 61 00 08 00 a8 00 00 00 00 08 00 40 08 00:00:09.055 WRITE FPDMA QUEUED
- Error 6099 [2] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 38 00 00 02 41 0d 28 40 08 00:00:06.247 READ FPDMA QUEUED
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:00:06.246 SET FEATURES [Enable SATA feature]
- ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:00:06.246 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:06.246 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:06.246 IDENTIFY DEVICE
- Error 6098 [1] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 10 00 00 02 41 0d 28 40 08 00:25:50.868 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:25:50.868 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:25:50.868 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:25:50.867 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:25:50.867 SET FEATURES [Set transfer mode]
- Error 6097 [0] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 90 00 00 02 41 0d 28 40 08 00:25:48.227 READ FPDMA QUEUED
- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:25:48.194 FLUSH CACHE EXT
- 61 00 08 00 00 00 00 00 00 08 00 40 08 00:25:48.194 WRITE FPDMA QUEUED
- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:25:48.186 FLUSH CACHE EXT
- 61 00 08 00 88 00 00 00 00 08 00 40 08 00:25:48.186 WRITE FPDMA QUEUED
- Error 6096 [23] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 b0 00 00 0f 84 1f a8 40 08 00:24:16.969 READ FPDMA QUEUED
- 60 00 08 00 40 00 00 02 41 0d 28 40 08 00:24:16.956 READ FPDMA QUEUED
- 60 00 08 00 e0 00 00 0a fc 0e f8 40 08 00:24:16.956 READ FPDMA QUEUED
- 60 00 08 00 38 00 00 0e d8 e7 f8 40 08 00:24:16.933 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:24:16.933 SET FEATURES [Enable SATA feature]
- Error 6095 [22] occurred at disk power-on lifetime: 26396 hours (1099 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 02 0d 00 41 2e 40 00 Error: UNC at LBA = 0x20d00412e = 8808055086
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 20 00 00 02 41 0d 28 40 08 00:24:14.553 READ FPDMA QUEUED
- 60 00 08 00 b8 00 00 0a 20 1e f8 40 08 00:24:14.551 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:24:14.551 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:24:14.551 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:24:14.550 IDENTIFY DEVICE
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 31 Celsius
- Power Cycle Min/Max Temperature: 31/31 Celsius
- Lifetime Min/Max Temperature: 20/51 Celsius
- Specified Max Operating Temperature: 30 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 128 (43)
- Index Estimated Time Temperature Celsius
- 44 2022-09-23 16:15 ? -
- 45 2022-09-23 16:16 32 *************
- 46 2022-09-23 16:17 ? -
- 47 2022-09-23 16:18 32 *************
- 48 2022-09-23 16:19 ? -
- 49 2022-09-23 16:20 32 *************
- 50 2022-09-23 16:21 ? -
- 51 2022-09-23 16:22 32 *************
- 52 2022-09-23 16:23 ? -
- 53 2022-09-23 16:24 32 *************
- 54 2022-09-23 16:25 ? -
- 55 2022-09-23 16:26 32 *************
- 56 2022-09-23 16:27 ? -
- 57 2022-09-23 16:28 32 *************
- 58 2022-09-23 16:29 ? -
- 59 2022-09-23 16:30 32 *************
- 60 2022-09-23 16:31 ? -
- 61 2022-09-23 16:32 32 *************
- 62 2022-09-23 16:33 ? -
- 63 2022-09-23 16:34 32 *************
- 64 2022-09-23 16:35 ? -
- 65 2022-09-23 16:36 32 *************
- 66 2022-09-23 16:37 ? -
- 67 2022-09-23 16:38 32 *************
- 68 2022-09-23 16:39 ? -
- 69 2022-09-23 16:40 32 *************
- 70 2022-09-23 16:41 ? -
- 71 2022-09-23 16:42 32 *************
- 72 2022-09-23 16:43 ? -
- 73 2022-09-23 16:44 32 *************
- 74 2022-09-23 16:45 ? -
- 75 2022-09-23 16:46 32 *************
- 76 2022-09-23 16:47 ? -
- 77 2022-09-23 16:48 32 *************
- 78 2022-09-23 16:49 ? -
- 79 2022-09-23 16:50 32 *************
- 80 2022-09-23 16:51 ? -
- 81 2022-09-23 16:52 32 *************
- 82 2022-09-23 16:53 ? -
- 83 2022-09-23 16:54 32 *************
- 84 2022-09-23 16:55 ? -
- 85 2022-09-23 16:56 32 *************
- 86 2022-09-23 16:57 ? -
- 87 2022-09-23 16:58 32 *************
- 88 2022-09-23 16:59 ? -
- 89 2022-09-23 17:00 32 *************
- 90 2022-09-23 17:01 ? -
- 91 2022-09-23 17:02 32 *************
- 92 2022-09-23 17:03 ? -
- 93 2022-09-23 17:04 32 *************
- 94 2022-09-23 17:05 ? -
- 95 2022-09-23 17:06 32 *************
- 96 2022-09-23 17:07 ? -
- 97 2022-09-23 17:08 32 *************
- 98 2022-09-23 17:09 ? -
- 99 2022-09-23 17:10 32 *************
- 100 2022-09-23 17:11 ? -
- 101 2022-09-23 17:12 32 *************
- 102 2022-09-23 17:13 ? -
- 103 2022-09-23 17:14 32 *************
- 104 2022-09-23 17:15 ? -
- 105 2022-09-23 17:16 32 *************
- 106 2022-09-23 17:17 ? -
- 107 2022-09-23 17:18 32 *************
- 108 2022-09-23 17:19 ? -
- 109 2022-09-23 17:20 32 *************
- 110 2022-09-23 17:21 ? -
- 111 2022-09-23 17:22 32 *************
- 112 2022-09-23 17:23 ? -
- 113 2022-09-23 17:24 31 ************
- 114 2022-09-23 17:25 ? -
- 115 2022-09-23 17:26 31 ************
- 116 2022-09-23 17:27 ? -
- 117 2022-09-23 17:28 31 ************
- 118 2022-09-23 17:29 ? -
- 119 2022-09-23 17:30 31 ************
- 120 2022-09-23 17:31 ? -
- 121 2022-09-23 17:32 31 ************
- 122 2022-09-23 17:33 31 ************
- 123 2022-09-23 17:34 ? -
- 124 2022-09-23 17:35 31 ************
- 125 2022-09-23 17:36 ? -
- 126 2022-09-23 17:37 31 ************
- 127 2022-09-23 17:38 ? -
- 0 2022-09-23 17:39 31 ************
- 1 2022-09-23 17:40 ? -
- 2 2022-09-23 17:41 31 ************
- 3 2022-09-23 17:42 ? -
- 4 2022-09-23 17:43 31 ************
- 5 2022-09-23 17:44 ? -
- 6 2022-09-23 17:45 31 ************
- 7 2022-09-23 17:46 ? -
- 8 2022-09-23 17:47 31 ************
- 9 2022-09-23 17:48 ? -
- 10 2022-09-23 17:49 31 ************
- 11 2022-09-23 17:50 ? -
- 12 2022-09-23 17:51 31 ************
- 13 2022-09-23 17:52 ? -
- 14 2022-09-23 17:53 31 ************
- 15 2022-09-23 17:54 ? -
- 16 2022-09-23 17:55 31 ************
- 17 2022-09-23 17:56 ? -
- 18 2022-09-23 17:57 31 ************
- 19 2022-09-23 17:58 ? -
- 20 2022-09-23 17:59 31 ************
- 21 2022-09-23 18:00 ? -
- 22 2022-09-23 18:01 31 ************
- 23 2022-09-23 18:02 ? -
- 24 2022-09-23 18:03 31 ************
- 25 2022-09-23 18:04 ? -
- 26 2022-09-23 18:05 31 ************
- 27 2022-09-23 18:06 ? -
- 28 2022-09-23 18:07 31 ************
- 29 2022-09-23 18:08 ? -
- 30 2022-09-23 18:09 31 ************
- 31 2022-09-23 18:10 ? -
- 32 2022-09-23 18:11 31 ************
- 33 2022-09-23 18:12 ? -
- 34 2022-09-23 18:13 31 ************
- 35 2022-09-23 18:14 ? -
- 36 2022-09-23 18:15 31 ************
- 37 2022-09-23 18:16 ? -
- 38 2022-09-23 18:17 31 ************
- 39 2022-09-23 18:18 ? -
- 40 2022-09-23 18:19 31 ************
- 41 2022-09-23 18:20 31 ************
- 42 2022-09-23 18:21 ? -
- 43 2022-09-23 18:22 31 ************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
- 0x8000 4 23 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement