TomTom Start 50 UART u-boot

U-Boot SPL 2011.09-p4-1971382 (Jun 22 2015 - 12:22:30)
Texas Instruments Revision detection unimplemented
SPDL version 0.3 format 1 ddr_type 1 ddr_freq 1
SPDL architecture_id 1 machine_id 9 pcb_id 9 mpu_maxfeq 0
Configuring for DDR3 K4B4G1646B-HIH9 running @ 390 MHz on a nav4-b6 board
OMAP SD/MMC: 1
[/APTS SPL]


U-Boot 2011.09-p4-1971382 (Jun 22 2015 - 12:22:30)

I2C:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
UBOOT: machine id: 9 pcb_id: 9
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

Enabling watchdog timer with a timeout of 60 seconds
Data (writethrough) Cache is ON
mmc1(part 0) is current device
Loading file "uboot.conf" from mmc device 1:4 (xxb4)
** File not found uboot.conf
bootconf: loading default values

MMC read: dev # 1, block # 1792, count 16 ... 16 blocks read: OK
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
AUTOTEST: SPLASH SCREEN
Hit any key to stop autoboot:  0
Loading file "/fdt/nav4-b6.dtb" from mmc device 1:4 (xxb4)
13787 bytes read
Loading file "uImage" from mmc device 1:4 (xxb4)
4031232 bytes read
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:
   Image Type:   ARM Linux Multi-File Image (uncompressed)
   Data Size:    4031124 Bytes = 3.8 MiB
   Load Address: ffffffff
   Entry Point:  80008000
   Contents:
      Image 0: 4029536 Bytes = 3.8 MiB
      Image 1: 1576 Bytes = 1.5 KiB
## Flattened Device Tree blob at 82000000
   Booting using the fdt blob at 0x82000000
   XIP Multi-File Image ... OK
OK
   reserving fdt memory region: addr=8fff0000 size=2000
   reserving fdt memory region: addr=9ffff000 size=c00
   Loading Device Tree to 9fff8000, end 9fffec7a ... OK

Starting kernel ...
[/APTS U-Boot]

[    0.508552] [APTS InitRamFS]
[    0.512170] initramfs: AUTOTEST: BOOTMODE: cold
[    0.596944] initramfs: AUTOTEST: COLD BOOT
[    0.699132] initramfs: AUTOTEST: root=/dev/mmcblk1p4
/dev/mmcblk1p4 contains a file system with errors, check forced.
Inode 6411 has EXTENTS_FL flag set on filesystem without extents support.


/dev/mmcblk1p4: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
        (i.e., without -a or -p options)
[    1.357193] initramfs: AUTOTEST: PLAYING TOMTOM SOUND
[    1.564035] Restarting system.

U-Boot SPL 2011.09-p4-1971382 (Jun 22 2015 - 12:22:30)
Texas Instruments Revision detection unimplemented
SPDL version 0.3 format 1 ddr_type 1 ddr_freq 1
SPDL architecture_id 1 machine_id 9 pcb_id 9 mpu_maxfeq 0
Configuring for DDR3 K4B4G1646B-HIH9 running @ 390 MHz on a nav4-b6 board
OMAP SD/MMC: 1
[/APTS SPL]


U-Boot 2011.09-p4-1971382 (Jun 22 2015 - 12:22:30)

I2C:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
UBOOT: machine id: 9 pcb_id: 9
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

Enabling watchdog timer with a timeout of 60 seconds
Data (writethrough) Cache is ON
mmc1(part 0) is current device
Loading file "uboot.conf" from mmc device 1:4 (xxb4)
** File not found uboot.conf
bootconf: loading default values

MMC read: dev # 1, block # 1792, count 16 ... 16 blocks read: OK
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
AUTOTEST: SPLASH SCREEN
Warning: Bootlimit (1) exceeded. Using altbootcmd.
Hit any key to stop autoboot:  0
** Bad partition 3 **
Loading file "/fdt/nav4-b6.dtb" from mmc device 1:3 (xxb3)
13787 bytes read
Entering recovery mode ...
Loading file "uImage" from mmc device 1:3 (xxb3)
4111544 bytes read
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:
   Image Type:   ARM Linux Multi-File Image (uncompressed)
   Data Size:    4111436 Bytes = 3.9 MiB
   Load Address: ffffffff
   Entry Point:  80008000
   Contents:
      Image 0: 4109848 Bytes = 3.9 MiB
      Image 1: 1576 Bytes = 1.5 KiB
## Flattened Device Tree blob at 82000000
   Booting using the fdt blob at 0x82000000
   XIP Multi-File Image ... OK
OK
   reserving fdt memory region: addr=8fff0000 size=2000
   reserving fdt memory region: addr=9ffff000 size=c00
   Loading Device Tree to 9fff8000, end 9fffec7a ... OK

Starting kernel ...
[/APTS U-Boot]

[    0.511106] [APTS InitRamFS]
[    0.514686] initramfs: AUTOTEST: BOOTMODE: warm
[    0.578537] initramfs: AUTOTEST: WARM BOOT
[    0.745723] EXT3-fs (loop0): error: no journal found. mounting ext3 over ext2?
[    0.766768] initramfs: AUTOTEST: starting BackupFS init
[    0.826531] Hash check failed on read of sector 9440 on device loop0
[    0.833178] loop: transfer error block 1180
[    0.837780] Hash check failed on read of sector 9440 on device loop0
[    0.844412] loop: transfer error block 1180
[    0.858756] Hash check failed on read of sector 9440 on device loop0
[    0.865438] loop: transfer error block 1180
[    1.027753] Hash check failed on read of sector 9440 on device loop0
[    1.034407] loop: transfer error block 1180
mount: cannot read /etc/fstab: No such file or directory
**WARN: Not all filesystems could be mounted
cp: cannot create '/dev/acc0_aux': Read-only file system
cp: cannot create '/dev/acc0_x': Read-only file system
cp: cannot create '/dev/acc0_y': Read-only file system
cp: cannot create '/dev/acc0_z': Read-only file system
cp: cannot create '/dev/aloadC0': Read-only file system
cp: cannot create '/dev/aloadC1': Read-only file system
cp: cannot create '/dev/aloadC2': Read-only file system
cp: cannot create '/dev/aloadC3': Read-only file system
cp: cannot create '/dev/aloadSEQ': Read-only file system
cp: cannot create '/dev/apm_bios': Read-only file system
cp: cannot create '/dev/baro0': Read-only file system
cp: cannot create '/dev/console': File exists
cp: cannot create '/dev/controlC0': Read-only file system
cp: cannot create '/dev/controlC1': Read-only file system
cp: cannot create '/dev/dsp': Read-only file system
cp: cannot create symlink '/dev/fb': Read-only file system
cp: cannot create '/dev/fb0': Read-only file system
cp: cannot create '/dev/fb1': Read-only file system
cp: cannot create '/dev/fb2': Read-only file system
cp: cannot create '/dev/fmt': Read-only file system
cp: cannot create '/dev/gadc0': Read-only file system
cp: cannot create '/dev/gadc1': Read-only file system
cp: cannot create '/dev/gadc2': Read-only file system
cp: cannot create '/dev/gadc3': Read-only file system
cp: cannot create '/dev/gadc4': Read-only file system
cp: cannot create symlink '/dev/gyro0_x': Read-only file system
cp: cannot create symlink '/dev/gyro0_y': Read-only file system
cp: cannot create '/dev/i2c-0': Read-only file system
cp: cannot create '/dev/i2c-1': Read-only file system
cp: cannot create directory '/dev/input': Read-only file system
cp: cannot create '/dev/kmem': Read-only file system
cp: cannot create '/dev/loop0': Read-only file system
cp: cannot create '/dev/loop1': Read-only file system
cp: cannot create '/dev/loop2': Read-only file system
cp: cannot create '/dev/loop3': Read-only file system
cp: cannot create '/dev/loop4': Read-only file system
cp: cannot create '/dev/loop5': Read-only file system
cp: cannot create '/dev/loop6': Read-only file system
cp: cannot create '/dev/loop7': Read-only file system
cp: cannot create '/dev/mem': Read-only file system
cp: cannot create directory '/dev/misc': Read-only file system
cp: cannot create '/dev/mmcblk0': Read-only file system
cp: cannot create '/dev/mmcblk0p1': Read-only file system
cp: cannot create '/dev/mmcblk0p2': Read-only file system
cp: cannot create '/dev/mmcblk0p3': Read-only file system
cp: cannot create '/dev/mmcblk0p4': Read-only file system
cp: cannot create '/dev/mmcblk0p5': Read-only file system
cp: cannot create '/dev/mmcblk0p6': Read-only file system
cp: cannot create '/dev/mmcblk0p7': Read-only file system
cp: cannot create '/dev/mmcblk1': Read-only file system
cp: cannot create '/dev/mmcblk1p1': Read-only file system
cp: cannot create '/dev/mmcblk1p2': Read-only file system
cp: cannot create '/dev/mmcblk1p3': Read-only file system
cp: cannot create '/dev/mmcblk1p4': Read-only file system
cp: cannot create '/dev/mmcblk1p5': Read-only file system
cp: cannot create '/dev/mmcblk1p6': Read-only file system
cp: cannot create '/dev/mmcblk1p7': Read-only file system
cp: cannot create '/dev/null': Read-only file system
cp: cannot create '/dev/pcmC0D0c': Read-only file system
cp: cannot create '/dev/pcmC0D0p': Read-only file system
cp: cannot create '/dev/pcmC1D0c': Read-only file system
cp: cannot create '/dev/pcmC1D0p': Read-only file system
cp: cannot create '/dev/ppp': Read-only file system
cp: cannot create '/dev/ptmx': Read-only file system
cp: cannot create directory '/dev/pts': Read-only file system
cp: cannot create '/dev/radio0': Read-only file system
cp: cannot create '/dev/radio1': Read-only file system
cp: cannot create '/dev/ram0': Read-only file system
cp: cannot create '/dev/ram1': Read-only file system
cp: cannot create '/dev/ram2': Read-only file system
cp: cannot create '/dev/ram3': Read-only file system
cp: cannot create '/dev/random': Read-only file system
cp: cannot create '/dev/rf[    1.417874] Hash check failed on read of sector 9440 on device loop0
comm0': Read-onl[    1.425522] loop: transfer error block 1180
y file system
cp: cannot create '/dev/rfcomm1': Read-only file system
cp: cannot create '/dev/rfcomm2': Read-only file system
cp: cannot create '/dev/rfcomm3': Read-only file system
cp: cannot create '/dev/rfkill': Read-only file system
cp: cannot create '/dev/rtc': Read-only file system
cp: cannot create symlink '/dev/rtc0': Read-only file system
cp: cannot create directory '/dev/shm': Read-only file system
cp: cannot create directory '/dev/snd': Read-only file system
cp: cannot create '/dev/spichar': Read-only file system
cp: cannot create '/dev/spidev1.0': Read-only file system
cp: cannot create '/dev/temp0': Read-only[    1.487227] Hash check failed on read of sector 9440 on device loop0
 file system
cp[    1.494274] loop: transfer error block 1180
: cannot create '/dev/timer': Read-only file system
cp: cannot create '/dev/tty': Read-only file system
cp: cannot create '/dev/tty0': Read-only file system
cp: cannot create '/dev/tty1': Read-only file system
cp: cannot create '/dev/tty2': Read-only file system
cp: cannot create '/dev/tty3': Read-only file system[    1.527961] Hash check failed on read of sector 8536 on device loop0

cp: cannot cre[    1.534862] loop: transfer error block 1067
ate '/dev/tty4':[    1.540863] Hash check failed on read of sector 8536 on device loop0
 Read-only file [    1.548684] loop: transfer error block 1067
system
cp: cannot create '/dev/tty5': Read-only file system
cp: cannot create '/dev/tty6': Read-only file system
cp: cannot create '/dev/tty7': Read-only file system
cp: cannot create '/dev/ttyS0': Read-only file system
cp: cannot create '/dev/ttyS1': Read-only file system
cp: cannot create '/dev/ttyS2': Read-only file system
cp: cannot create '/dev/ttyS3': Read-only file system
cp: cannot create '/dev/ttySAC0': Read-only file system
cp: cannot create '/dev/ttySAC1': Read-only file system
cp: cannot create '/dev/ttySAC2': Read-only file system
cp: cannot create '/dev/ttySAC3': Read-only file system
cp: cannot create '/dev/ttySAC4': Read-only file system
cp: cannot create '/dev/ttySAC5': Read-only file system
cp: cannot create '/dev/ttyUSB0': Read-only file system
cp: cannot create '/dev/urandom': Read-only file system
cp: cannot create directory '/dev/usb': Read-only file system
cp: cannot create '/dev/watchdog': Read-only file system
cp: cannot create '/dev/zero': Read-only file system
ln: /dev/uboot_part: Read-only file system
ln: /dev/fdt_part: Read-only file system
ln: /dev/rescue_part: Read-only file system
ln: /dev/content_part: Read-only file system
mount: cannot read /etc/fstab: No such file or directory
**WARN: Mounting /dev/pts FAILED
mkdir: cannot create directory '/var/lock': Read-only file system
mkdir: cannot create directory '/var/log': Read-only file system
mkdir: cannot create directory '/var/gprs/': Read-only file system
chmod: /var/run: Read-only file system
chown: unknown group name: daemon
mount: cannot read /etc/fstab: No such file or directory
**WARN: Mounting /var/log FAILED
touch: /var/gprs/resolv.conf: No such file or directory
mount: cannot read /etc/fstab: No such file or directory
**WARN: Mounting /mnt/flash FAILED
/sbin/init: line 51: can't create /dev/null: Read-only file system
/sbin/init: exec: line 54: /sbin/upstart: Input/output error
[    1.735367] Kernel panic - not syncing: Attempted to kill init!
[    1.741553] Backtrace:
[    1.744142] [<c0019a98>] (dump_backtrace+0x0/0x140) from [<c04649f0>] (dump_stack+0x20/0x24)
[    1.752977]  r6:c0558128 r5:c0738a7c r4:c0009774 r3:c0703700
[    1.758924] [<c04649d0>] (dump_stack+0x0/0x24) from [<c0464c74>] (panic+0x84/0x1d4)
[    1.766937] [<c0464bf0>] (panic+0x0/0x1d4) from [<c00518bc>] (do_exit+0x600/0x6e8)
[    1.774832]  r3:ffffeb18 r2:df069810 r1:df06bf60 r0:c0558128
[    1.780762]  r7:000000f8
[    1.783417] [<c00512bc>] (do_exit+0x0/0x6e8) from [<c0051c44>] (do_group_exit+0x4c/0xac)
[    1.791866]  r7:000000f8
[    1.794517] [<c0051bf8>] (do_group_exit+0x0/0xac) from [<c0051cc4>] (sys_exit_group+0x20/0x28)
[    1.803512]  r4:00094084 r3:00000000
[    1.807278] [<c0051ca4>] (sys_exit_group+0x0/0x28) from [<c00154c0>] (ret_fast_syscall+0x0/0x30)