API tools faq
paste
Advertisement
aat596

dmesg-twrp-arubaslim_and_uname-a

aat596
Jun 3rd, 2022
44
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 55.87 KB | None | 0 0
raw download clone embed print report
  1. antonialoy@MPad14:~/Baixades$ adb shell
  2. ~ # dmesg
  3. <6>[ 0.000000] c0 Booting Linux on physical CPU 0
  4. <6>[ 0.000000] c0 Initializing cgroup subsys cpu
  5. <5>[ 0.000000] c0 Linux version 3.4.0-novafusion (marcin@mint) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 Sun Jun 29 14:29:09 CEST 2014
  6. <4>[ 0.000000] c0 CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  7. <4>[ 0.000000] c0 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. <4>[ 0.000000] c0 Machine: QCT MSM8625 FFA
  9. <4>[ 0.000000] c0 ARUBA-SLIM OPEN H/W revision : 0x08
  10. <6>[ 0.000000] c0 memory pool 3 (start 36d00000 size 6000000) initialized
  11. <4>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
  12. <1>[ 0.000000] c0 Initialized strongly ordered page successfully
  13. <3>[ 0.000000] c0 smem_find(137, 80): wrong size 64
  14. <3>[ 0.000000] c0 smem_find(137, 72): wrong size 64
  15. <6>[ 0.000000] c0 socinfo_init: v4, id=127, ver=2.0, raw_id=1907, raw_ver=1, hw_plat=2, hw_plat_ver=65536
  16. <6>[ 0.000000] c0 L310 cache controller enabled
  17. <6>[ 0.000000] c0 l2x0: 8 ways, CACHE_ID 0x410054c8, AUX_CTRL 0x30d60000, Cache size: 524288 B
  18. <6>[ 0.000000] c0 Prfetch Ctrl: 0x74800003
  19. <7>[ 0.000000] c0 On node 0 totalpages: 222973
  20. <7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c08c8300, node_mem_map c15b6000
  21. <7>[ 0.000000] c0 Normal zone: 1528 pages used for memmap
  22. <7>[ 0.000000] c0 Normal zone: 0 pages reserved
  23. <7>[ 0.000000] c0 Normal zone: 193029 pages, LIFO batch:31
  24. <7>[ 0.000000] c0 HighMem zone: 414 pages used for memmap
  25. <7>[ 0.000000] c0 HighMem zone: 28002 pages, LIFO batch:7
  26. <6>[ 0.000000] c0 allocating 4976640 bytes at c1d56000 (1f56000 physical) for fb
  27. <6>[ 0.000000] c0 PERCPU: Embedded 9 pages/cpu @c2218000 s15040 r8192 d13632 u36864
  28. <7>[ 0.000000] c0 pcpu-alloc: s15040 r8192 d13632 u36864 alloc=9*4096
  29. <7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
  30. <4>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 221031
  31. <5>[ 0.000000] c0 Kernel command line: console=null loglevel=4 androidboot.hardware=qcom hw=8 recovery=1 LCDID=55C090 36 pwron_reason=0x1 usb=0 r_m=0x77665502 s_r=0x0 sec_log=0x80000@0x1fc8000c sec_dbg=0x80000@0x1fc00004 sec_subsys=0xd6c@0x1fd0000c androidboot.emmc_checksum=3 cordon=a16589aa53804bda30b829bfa09cfbbe androidboot.bootloader=I8260XXAML3 androidboot.debug_level=0x4f4c androidboot.emmc=true androidboot.serialno=b8488ae1 androidboot.baseband=msm
  32. <6>[ 0.000000] c0 [LCD] BOE
  33. <0>[ 0.000000] c0 sec_dbg_setup: str=@0x1fc00004
  34. <0>[ 0.000000] c0 sec_dbg_setup: secdbg_paddr = 0x1fc00004
  35. <0>[ 0.000000] c0 sec_dbg_setup: secdbg_size = 0x80000
  36. <6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
  37. <6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  38. <6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  39. <6>[ 0.000000] c0 Memory: 250MB 0MB 0MB 253MB 365MB = 870MB total
  40. <5>[ 0.000000] c0 Memory: 859884k/859884k available, 130324k reserved, 113664K highmem
  41. <5>[ 0.000000] c0 Virtual kernel memory layout:
  42. <5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  43. <5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  44. <5>[ 0.000000] c0 vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  45. <5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  46. <5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  47. <5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  48. <5>[ 0.000000] c0 .text : 0xc0008000 - 0xc08053ec (8181 kB)
  49. <5>[ 0.000000] c0 .init : 0xc0806000 - 0xc083cac0 ( 219 kB)
  50. <5>[ 0.000000] c0 .data : 0xc083e000 - 0xc08ca8f8 ( 563 kB)
  51. <5>[ 0.000000] c0 .bss : 0xc08ca91c - 0xc0f51f9c (6686 kB)
  52. <6>[ 0.000000] c0 SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  53. <6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
  54. <6>[ 0.000000] c0 Dump stacks of tasks blocking RCU-preempt GP.
  55. <6>[ 0.000000] c0 NR_IRQS:645
  56. <6>[ 0.000000] c0 sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
  57. <6>[ 0.000000] c0 Console: colour dummy device 80x30
  58. <6>[ 0.000241] c0 Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
  59. <6>[ 0.070086] c0 pid_max: default: 32768 minimum: 301
  60. <6>[ 0.070591] c0 Mount-cache hash table entries: 512
  61. <6>[ 0.072304] c0 Initializing cgroup subsys cpuacct
  62. <6>[ 0.072328] c0 Initializing cgroup subsys devices
  63. <6>[ 0.072346] c0 Initializing cgroup subsys freezer
  64. <6>[ 0.072403] c0 CPU: Testing write buffer coherency: ok
  65. <6>[ 0.072678] c0 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  66. <6>[ 0.072759] c0 hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available
  67. <6>[ 0.072893] c0 Setting up static identity map for 0x7923f0 - 0x792454
  68. <6>[ 0.074198] c1 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  69. <6>[ 0.074274] c0 Brought up 2 CPUs
  70. <6>[ 0.074298] c0 SMP: Total of 2 processors activated (597.19 BogoMIPS).
  71. <6>[ 0.082249] c0 dummy:
  72. <6>[ 0.082738] c0 NET: Registered protocol family 16
  73. <6>[ 0.085074] c0 gpiochip_add: registered GPIOs 0 to 15 on device: generic
  74. <6>[ 0.085189] c0 gpiochip_add: registered GPIOs 16 to 42 on device: generic
  75. <6>[ 0.085291] c0 gpiochip_add: registered GPIOs 43 to 67 on device: generic
  76. <6>[ 0.085401] c0 gpiochip_add: registered GPIOs 68 to 94 on device: generic
  77. <6>[ 0.085499] c0 gpiochip_add: registered GPIOs 95 to 106 on device: generic
  78. <6>[ 0.085619] c0 gpiochip_add: registered GPIOs 107 to 132 on device: generic
  79. <6>[ 0.087434] c0 Shared PLL control available.
  80. <6>[ 0.090964] c0 acpuclk_7627_probe()
  81. <6>[ 0.091019] c0 Dynamic reprogramming is ON
  82. <6>[ 0.092233] c0 ACPU running at 600000 KHz
  83. <6>[ 0.092259] c0 Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
  84. <6>[ 0.092293] c0 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 6 3 7 -1
  85. <6>[ 0.092326] c0 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 6 3 7 -1
  86. <6>[ 0.092359] c0 2 122880 1 2 15360 4 61440 -1 1 -1 -1 6 3 7 8
  87. <6>[ 0.092391] c0 3 245760 1 1 30720 4 61440 -1 1 -1 -1 6 -1 7 8
  88. <6>[ 0.092423] c0 4 300000 2 4 37500 4 122880 -1 1 -1 -1 6 -1 7 8
  89. <6>[ 0.092456] c0 5 320000 0 3 40000 4 122880 -1 1 4 -1 6 -1 7 8
  90. <6>[ 0.092488] c0 6 480000 0 2 60000 4 122880 5 1 4 -1 -1 -1 7 9
  91. <6>[ 0.092521] c0 7 600000 2 2 75000 4 160000 5 1 4 -1 -1 -1 -1 9
  92. <6>[ 0.092553] c0 8 700800 4 1 87500 4 160000 5 2 4 -1 -1 -1 -1 10
  93. <6>[ 0.092586] c0 9 1008000 4 1 126000 4 200000 6 -1 7 8 -1 -1 -1 10
  94. <6>[ 0.092619] c0 10 1209600 4 1 151200 4 200000 -1 -1 -1 8 -1 -1 -1 -1
  95. <6>[ 0.092643] c0 CPU0: 6 scaling frequencies supported.
  96. <6>[ 0.092661] c0 CPU1: 6 scaling frequencies supported.
  97. <6>[ 0.092716] c0 msm_cpr_init: cpr: ori_turbo_quot: 0x39
  98. <6>[ 0.092738] c0 msm_cpr_init: cpr: ring_osc: 0x2
  99. <6>[ 0.092754] c0 msm_cpr_init: cpr: turbo_quot: 0x3e
  100. <6>[ 0.092773] c0 msm_cpr_init: cpr: pvs_fuse: 0x9
  101. <6>[ 0.092789] c0 msm_cpr_init: cpr: floor_fuse: 0x0
  102. <6>[ 0.092809] c0 msm_cpr_init: cpr: nom_Vmin: 1050000, turbo_Vmin: 1125000
  103. <6>[ 0.092833] c0 msm_cpr_init: cpr: nom_Vmax: 1350000, turbo_Vmax: 1350000
  104. <6>[ 0.093043] c0 vddx_c2: 750 <--> 1500 mV at 1175 mV normal
  105. <3>[ 0.093148] c0 Error-Bad Function Input
  106. <6>[ 0.093558] c0 smps1: 1100 mV normal
  107. <6>[ 0.093838] c0 smps2: 1100 mV normal
  108. <6>[ 0.094108] c0 smps3: 1800 mV normal
  109. <6>[ 0.094369] c0 smps4: 2100 mV normal
  110. <6>[ 0.094651] c0 ldo01: 3000 <--> 3300 mV normal
  111. <6>[ 0.094923] c0 ldo02: 2850 mV normal
  112. <6>[ 0.095198] c0 ldo03: 1200 mV normal
  113. <6>[ 0.095469] c0 ldo04: 1100 mV normal
  114. <6>[ 0.095756] c0 ldo05: 1300 <--> 1350 mV normal
  115. <6>[ 0.096009] c0 ldo06: 1200 mV normal
  116. <6>[ 0.096296] c0 ldo07: 2600 mV normal
  117. <6>[ 0.096566] c0 ldo08: 2850 mV normal
  118. <6>[ 0.096848] c0 ldo09: 1800 mV normal
  119. <6>[ 0.097129] c0 ldo10: 1800 <--> 3000 mV normal
  120. <6>[ 0.097414] c0 ldo11: 1800 mV normal
  121. <6>[ 0.097686] c0 ldo12: 2850 mV normal
  122. <6>[ 0.097996] c0 ldo13: 2850 mV normal
  123. <6>[ 0.098278] c0 ldo14: 3300 mV normal
  124. <6>[ 0.098576] c0 ldo15: 1800 <--> 2850 mV normal
  125. <6>[ 0.098861] c0 ldo16: 1800 <--> 2850 mV normal
  126. <6>[ 0.099139] c0 ldo17: 2700 <--> 2900 mV normal
  127. <6>[ 0.099424] c0 ldo18: 2700 mV normal
  128. <6>[ 0.099706] c0 ldo19: 3000 mV normal
  129. <6>[ 0.100011] c0 ncp: 1800 mV normal
  130. <0>[ 0.100549] c0 (sec_debug_init)
  131. <6>[ 0.100599] c0 sec_debug_init: vaddr=0xf0100004 paddr=0x1fc00004 size=0x80000 sizeof(struct sec_debug_log)=0x3c020
  132. <6>[ 0.100626] c0 sec_debug_init: init done
  133. <7>[ 0.100698] c0 gpio_request: gpio-48 (h2w_detect) status -16
  134. <3>[ 0.100714] c0 sec_jack:gpio_request fail
  135. <4>[ 0.100791] c0 ------------[ cut here ]------------
  136. <4>[ 0.100831] c0 WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x44/0xa4()
  137. <4>[ 0.100851] c0 autorequest GPIO-57
  138. <4>[ 0.100864] c0 Modules linked in:
  139. <4>[ 0.100919] c0 [<c0012bbc>] (unwind_backtrace+0x0/0xe0) from [<c00864c0>] (warn_slowpath_common+0x4c/0x64)
  140. <4>[ 0.100961] c0 [<c00864c0>] (warn_slowpath_common+0x4c/0x64) from [<c0086558>] (warn_slowpath_fmt+0x2c/0x3c)
  141. <4>[ 0.101003] c0 [<c0086558>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0251348>] (gpio_ensure_requested+0x44/0xa4)
  142. <4>[ 0.101044] c0 [<c0251348>] (gpio_ensure_requested+0x44/0xa4) from [<c02516dc>] (gpio_direction_output+0x94/0x288)
  143. <4>[ 0.101091] c0 [<c02516dc>] (gpio_direction_output+0x94/0x288) from [<c007e72c>] (sec_jack_gpio_init+0x6c/0x90)
  144. <4>[ 0.101139] c0 [<c007e72c>] (sec_jack_gpio_init+0x6c/0x90) from [<c0812588>] (msm7x2x_init+0x164/0x4e0)
  145. <4>[ 0.101184] c0 [<c0812588>] (msm7x2x_init+0x164/0x4e0) from [<c0808970>] (customize_machine+0x1c/0x28)
  146. <4>[ 0.101226] c0 [<c0808970>] (customize_machine+0x1c/0x28) from [<c00085e4>] (do_one_initcall+0x90/0x160)
  147. <4>[ 0.101266] c0 [<c00085e4>] (do_one_initcall+0x90/0x160) from [<c0806c04>] (kernel_init+0xe8/0x1a4)
  148. <4>[ 0.101309] c0 [<c0806c04>] (kernel_init+0xe8/0x1a4) from [<c000df44>] (kernel_thread_exit+0x0/0x8)
  149. <4>[ 0.101368] c0 ---[ end trace 1b75b31a2719ed1c ]---
  150. <4>[ 0.101394] c0 sensor gpio init!!
  151. <6>[ 0.101664] c0 samsung sys class init.
  152. <4>[ 0.105359] c0 smps3: Failed to create debugfs directory
  153. <4>[ 0.105956] c0 smps3: Failed to create debugfs directory
  154. <6>[ 0.106823] c0 bt_power_init
  155. <6>[ 0.106839] c0 bt_gpio_init : low
  156. <6>[ 0.112179] c0 fs_gfx3d: normal
  157. <6>[ 0.141219] c0 bio: create slab <bio-0> at 0
  158. <3>[ 0.146414] c0 qup_i2c qup_i2c.1: QUP: I2C status flags :0x1321d0, irq:75
  159. <4>[ 0.146484] c0 sx150x 1-003e: i2c write fail: can't write 01 to 1f: -1253840
  160. <4>[ 0.146526] c0 sx150x: probe of 1-003e failed with error -1253840
  161. <6>[ 0.146963] c0 ION heap vmalloc created
  162. <6>[ 0.147071] c0 ION heap camera_preview created at 36d00000 with size 3c00000
  163. <6>[ 0.147138] c0 ION heap audio created at 3a900000 with size 3a000
  164. <6>[ 0.147233] c0 ION heap sf created at 3a93a000 with size 2300000
  165. <6>[ 0.147269] c0 ION heap bl_mem_audio created at 10000 with size f0000
  166. <5>[ 0.147808] c0 SCSI subsystem initialized
  167. <6>[ 0.148179] c0 usbcore: registered new interface driver usbfs
  168. <6>[ 0.148306] c0 usbcore: registered new interface driver hub
  169. <6>[ 0.148504] c0 usbcore: registered new device driver usb
  170. <6>[ 0.149054] c0 i2c-gpio i2c-gpio.2: using pins 40 (SDA) and 35 (SCL)
  171. <6>[ 0.149588] c0 i2c-gpio i2c-gpio.4: using pins 17 (SDA) and 16 (SCL)
  172. <6>[ 0.149891] c0 i2c-gpio i2c-gpio.3: using pins 122 (SDA) and 123 (SCL)
  173. <6>[ 0.150199] c0 i2c-gpio i2c-gpio.6: using pins 79 (SDA) and 78 (SCL)
  174. <6>[ 0.150564] c0 i2c-gpio i2c-gpio.7: using pins 125 (SDA) and 116 (SCL)
  175. <6>[ 0.150664] c0 Linux media interface: v0.10
  176. <6>[ 0.150749] c0 Linux video capture interface: v2.00
  177. <6>[ 0.151129] c0 [SENSORS CORE] sensors_class_init
  178. <6>[ 0.151253] c0 Advanced Linux Sound Architecture Driver Version 1.0.25.
  179. <6>[ 0.152086] c0 Bluetooth: Core ver 2.16
  180. <6>[ 0.152166] c0 NET: Registered protocol family 31
  181. <6>[ 0.152186] c0 Bluetooth: HCI device and connection manager initialized
  182. <6>[ 0.152213] c0 Bluetooth: HCI socket layer initialized
  183. <6>[ 0.152233] c0 Bluetooth: L2CAP socket layer initialized
  184. <6>[ 0.152299] c0 Bluetooth: SCO socket layer initialized
  185. <6>[ 0.153954] c0 msm_setup_fiq_handler : msm7k fiq setup--done
  186. <6>[ 0.153979] c0 Switching to clocksource dg_timer
  187. <6>[ 0.187951] c0 NET: Registered protocol family 2
  188. <6>[ 0.188393] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  189. <6>[ 0.189298] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  190. <6>[ 0.192549] c0 TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  191. <6>[ 0.194443] c0 TCP: Hash tables configured (established 131072 bind 65536)
  192. <6>[ 0.194473] c0 TCP: reno registered
  193. <6>[ 0.194513] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
  194. <6>[ 0.194594] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  195. <6>[ 0.195256] c0 NET: Registered protocol family 1
  196. <6>[ 0.195619] c0 Unpacking initramfs...
  197. <6>[ 0.500981] c0 Freeing initrd memory: 2756K
  198. <3>[ 0.506754] c0 Notify: smsm init
  199. <4>[ 0.507071] c0 get_nand_partitions: no flash partition table in shared memory
  200. <6>[ 0.512939] c0 rpcrouter_smd_remote_notify: smd opened 0x (null)
  201. <6>[ 0.513249] c0 [adsp.c:adsp_init] msm_adsp -- 0
  202. <6>[ 0.515043] c0 [audpp.c:audpp_probe] Number of decoder supported 5
  203. <6>[ 0.515083] c0 [audpp.c:audpp_probe] Number of concurrency supported 8
  204. <6>[ 0.515106] c0 [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
  205. <6>[ 0.515126] c0 [audpp.c:audpp_probe] queueid:13
  206. <6>[ 0.515159] c0 [audpp.c:audpp_probe] decid:0
  207. <6>[ 0.515178] c0 [audpp.c:audpp_probe] nr_codec_support:11
  208. <6>[ 0.515198] c0 [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
  209. <6>[ 0.515218] c0 [audpp.c:audpp_probe] queueid:14
  210. <6>[ 0.515249] c0 [audpp.c:audpp_probe] decid:1
  211. <6>[ 0.515268] c0 [audpp.c:audpp_probe] nr_codec_support:11
  212. <6>[ 0.515288] c0 [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
  213. <6>[ 0.515321] c0 [audpp.c:audpp_probe] queueid:15
  214. <6>[ 0.515339] c0 [audpp.c:audpp_probe] decid:2
  215. <6>[ 0.515358] c0 [audpp.c:audpp_probe] nr_codec_support:11
  216. <6>[ 0.515378] c0 [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
  217. <6>[ 0.515409] c0 [audpp.c:audpp_probe] queueid:16
  218. <6>[ 0.515429] c0 [audpp.c:audpp_probe] decid:3
  219. <6>[ 0.515446] c0 [audpp.c:audpp_probe] nr_codec_support:11
  220. <6>[ 0.515466] c0 [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
  221. <6>[ 0.515486] c0 [audpp.c:audpp_probe] queueid:17
  222. <6>[ 0.515518] c0 [audpp.c:audpp_probe] decid:4
  223. <6>[ 0.515536] c0 [audpp.c:audpp_probe] nr_codec_support:1
  224. <3>[ 0.516228] c1 rpcrouter: Server create rejected, version = 0, program = 3000003b
  225. <1>[ 0.518644] c0 dma_test_init, minor number 97
  226. <4>[ 0.518666] c0 [VIB] Init
  227. <4>[ 0.518739] c0 [VIB] Prob
  228. <3>[ 0.519779] c1 [adsp.c:msm_adsp_probe] Entering in probe
  229. <3>[ 0.519804] c1 [adsp.c:msm_adsp_probe] adsp probe platform_get_irq returned
  230. <3>[ 0.520059] c1 [adsp.c:msm_adsp_probe] adsp probe rpc_register_server done
  231. <3>[ 0.520096] c1 BUG: scheduling while atomic: kworker/u:1/21/0x00000002
  232. <4>[ 0.520116] c1 Modules linked in:
  233. <4>[ 0.520193] c1 [<c0012bbc>] (unwind_backtrace+0x0/0xe0) from [<c058bf10>] (__schedule+0x78/0x614)
  234. <4>[ 0.520236] c1 [<c058bf10>] (__schedule+0x78/0x614) from [<c058ab24>] (schedule_timeout+0x1c/0x30c)
  235. <4>[ 0.520276] c1 [<c058ab24>] (schedule_timeout+0x1c/0x30c) from [<c058caa8>] (wait_for_common+0xec/0x180)
  236. <4>[ 0.520326] c1 [<c058caa8>] (wait_for_common+0xec/0x180) from [<c00a2e20>] (kthread_create_on_node+0x70/0xd8)
  237. <4>[ 0.520378] c1 [<c00a2e20>] (kthread_create_on_node+0x70/0xd8) from [<c003d45c>] (msm_adsp_probe+0x200/0x3d4)
  238. <4>[ 0.520428] c1 [<c003d45c>] (msm_adsp_probe+0x200/0x3d4) from [<c02d124c>] (platform_drv_probe+0x14/0x18)
  239. <4>[ 0.520471] c1 [<c02d124c>] (platform_drv_probe+0x14/0x18) from [<c02d012c>] (driver_probe_device+0xc8/0x210)
  240. <4>[ 0.520513] c1 [<c02d012c>] (driver_probe_device+0xc8/0x210) from [<c02cea34>] (bus_for_each_drv+0x4c/0x84)
  241. <4>[ 0.520553] c1 [<c02cea34>] (bus_for_each_drv+0x4c/0x84) from [<c02d001c>] (device_attach+0x74/0xa0)
  242. <4>[ 0.520591] c1 [<c02d001c>] (device_attach+0x74/0xa0) from [<c02cf694>] (bus_probe_device+0x28/0x98)
  243. <4>[ 0.520629] c1 [<c02cf694>] (bus_probe_device+0x28/0x98) from [<c02ce05c>] (device_add+0x414/0x57c)
  244. <4>[ 0.520669] c1 [<c02ce05c>] (device_add+0x414/0x57c) from [<c02d16f8>] (platform_device_add+0x108/0x164)
  245. <4>[ 0.520711] c1 [<c02d16f8>] (platform_device_add+0x108/0x164) from [<c0034e78>] (do_read_data+0x544/0xd28)
  246. <4>[ 0.520754] c1 [<c0034e78>] (do_read_data+0x544/0xd28) from [<c009e95c>] (process_one_work+0x280/0x488)
  247. <4>[ 0.520794] c1 [<c009e95c>] (process_one_work+0x280/0x488) from [<c009ed78>] (worker_thread+0x214/0x3b4)
  248. <4>[ 0.520836] c1 [<c009ed78>] (worker_thread+0x214/0x3b4) from [<c00a2c04>] (kthread+0x84/0x90)
  249. <4>[ 0.520879] c1 [<c00a2c04>] (kthread+0x84/0x90) from [<c000df44>] (kernel_thread_exit+0x0/0x8)
  250. <3>[ 0.521034] c0 printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x1fc8000c
  251. <3>[ 0.521064] c0 printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x1fc80004
  252. <6>[ 0.531981] c1 __msm_rpc_connect: server not found 30000002:20001
  253. <6>[ 0.532549] c0 audit: initializing netlink socket (disabled)
  254. <5>[ 0.532656] c0 type=2000 audit(0.530:1): initialized
  255. <3>[ 0.537506] c1 [adsp.c:msm_adsp_probe] adsp probe completed successfully
  256. <6>[ 0.541534] c1 rmt_storage_get_ramfs: RAMFS entry: addr = 0x3cec0000, size = 0x00300000
  257. <6>[ 0.541618] c1 rmt_storage_get_ramfs: RAMFS entry: addr = 0x3cdc0000, size = 0x00100000
  258. <6>[ 0.541993] c1 rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
  259. <4>[ 0.547479] c1 rmt_storage_reg_callbacks: Callbacks (re)registered for 0x300000a7
  260. <4>[ 0.547541] c1
  261. <4>[ 0.547571] c1 rmt_storage_probe registered all the call back
  262. <4>[ 0.723249] c0 highmem bounce pool size: 64 pages
  263. <6>[ 0.733644] c0 fuse init (API version 7.18)
  264. <7>[ 0.734038] c0 yaffs: yaffs built Jun 29 2014 14:24:44 Installing.
  265. <6>[ 0.734204] c0 msgmni has been set to 1462
  266. <6>[ 0.736179] c0 io scheduler noop registered
  267. <6>[ 0.736463] c0 io scheduler cfq registered (default)
  268. <6>[ 0.738603] c0 mipi_dsi base phy_addr = 0xa1100000 virt = 0xf0400000
  269. <6>[ 0.738696] c0 [LCD] LCD GPIO Init.
  270. <4>[ 0.738994] c0 [LCD] ID=0x55C090, HBP=135, HFP=150, HPW=32, VBP=22, VFP=20, VPW=2
  271. <6>[ 0.739063] c0 [LCD] mipi_hx8369b_device_register
  272. <6>[ 0.739109] c0 [LCD] mipi_hx8369b_lcd_init
  273. <6>[ 0.739244] c0 [LCD] mipi_hx8369b_lcd_probe
  274. <6>[ 0.739586] c0 [LCD] mipi_hx8369b_lcd_probe
  275. <6>[ 0.739633] c0 setting pdata->panel_info.fb_num to 3. type: 8
  276. <6>[ 0.739859] c0 DSI_TWO_LANES
  277. <6>[ 0.744286] c0 FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  278. <7>[ 0.744791] c0 Registered led device: lcd-backlight
  279. <6>[ 0.774191] c0 [LCD] mipi_dsi_panel_msm_power : ON
  280. <6>[ 0.776523] c0 [LCD] LCD RESET : 23
  281. <6>[ 0.974114] c0 [LCD] mipi_hx8369b_lcd_on +
  282. <6>[ 0.974161] c0 [LCD] Temperature ADC : 360
  283. <6>[ 0.974204] c0 [LCD] Setting +
  284. <6>[ 0.974694] c0 [LCD] ID : BOE 0x55C090
  285. <6>[ 1.294104] c0 [LCD] Setting -
  286. <6>[ 1.295174] c0 [LCD] mipi_hx8369b_lcd_on -
  287. <6>[ 1.302344] c0 msm_serial: detected port #0
  288. <6>[ 1.302521] c0 msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 41) is a MSM
  289. <6>[ 1.303266] c0 msm_serial: driver initialized
  290. <6>[ 1.303989] c0 msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 77) is a MSM HS UART
  291. <6>[ 1.304476] c0 msm_serial_hs module loaded
  292. <6>[ 1.304739] c0 msm_serial_hsl: driver initialized
  293. <6>[ 1.306653] c0 diagchar initialized now
  294. <6>[ 1.309728] c0 kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  295. <6>[ 1.317001] c0 loop: module loaded
  296. <1>[ 1.317159] c0 pmem: pmem_setup: unable to register pmem driver(pmem) - zero size passed in!
  297. <4>[ 1.317259] c0 android_pmem: probe of android_pmem.0 failed with error -1
  298. <1>[ 1.317364] c0 pmem: pmem_setup: unable to register pmem driver(pmem_adsp) - zero size passed in!
  299. <4>[ 1.317456] c0 android_pmem: probe of android_pmem.1 failed with error -1
  300. <1>[ 1.317549] c0 pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!
  301. <4>[ 1.317641] c0 android_pmem: probe of android_pmem.2 failed with error -1
  302. <6>[ 1.317941] c0 fsa_microusb 3-0025: [FSA9480 micro usb] PROBE ...
  303. <6>[ 1.318006] c0 fsa_microusb 3-0025: fsa9480 id : 0
  304. <4>[ 1.319114] c0 KBJ TEST : fsa9480_write_reg , register = 5 , values = 0
  305. <4>[ 1.319578] c0 KBJ TEST : fsa9480_write_reg , register = 6 , values = 0
  306. <4>[ 1.320558] c0 KBJ TEST : fsa9480_write_reg , register = 2 , values = 1e
  307. <6>[ 1.321021] c0 fsa_microusb 3-0025: [fsa9480_irq_init] set ctrl=0x1e
  308. <6>[ 1.321338] c0 fsa_microusb 3-0025: [fsa9480_probe] 1563
  309. <4>[ 1.321394] c0 KBJ TEST : fsa9480_write_reg , register = 8 , values = 6
  310. <6>[ 1.323931] c0 fsa_microusb 3-0025: intr: 0x1, dev1: 0x20, dev2: 0x0, adc: 0x1f
  311. <4>[ 1.324001] c0 fsa9480_detect_dev : REG_CTRL = 1e , usbsw->mansw : 0
  312. <6>[ 1.324131] c0 fsa_microusb 3-0025: usb attached
  313. <6>[ 1.324181] c0 [BATT] [jena_usb_cb] Board file [fsa9480]: USB Callback
  314. <7>[ 1.324266] c0 pmic_rpc_req_reply: successfully connected to 0x60001 rpc version
  315. <4>[ 1.325128] c0 (null) : chg_valid enabled !!!
  316. <3>[ 1.325179] c0 touch_ta_noti; enable = 1
  317. <3>[ 1.325221] c0 [TSP] noti not yet 1,0.
  318. <6>[ 1.325266] c0 fsa_microusb 3-0025: [FSA9480] PROBE Done.
  319. <4>[ 1.325378] c0 i2c-core: driver [fsa_microusb] using legacy resume method
  320. <4>[ 1.325741] c0 [DUMP] secdump_init 283
  321. <6>[ 1.326148] c0 secdump_probe:144 - secdump_probe
  322. <6>[ 1.326246] c0 secdump_init:306 - smem_vendor1 = 0xFA306BF8
  323. <4>[ 1.326299] c0 [Silent Value] : 0
  324. <6>[ 1.327258] c0 SCSI Media Changer driver v0.25
  325. <6>[ 1.328534] c0 msm_nand_probe: phys addr 0xa0a00000
  326. <6>[ 1.328598] c0 msm_nand_probe: Dual Nand Ctrl in ping-pong mode
  327. <6>[ 1.328658] c0 msm_nand_probe: dmac 0x7
  328. <6>[ 1.328739] c0 msm_nand_probe: allocated dma buffer at ffdec000, dma_addr 2edd0000
  329. <3>[ 1.329076] c1 flash_onfi_probe: No partition info available
  330. <6>[ 1.329316] c1 status: 20
  331. <6>[ 1.329353] c1 nandid: 20202020 maker 20 device 20
  332. <3>[ 1.329409] c1 ERROR: unknown nand device manuf=20 devid=20
  333. <6>[ 1.329551] c1 SFLASHC Async Mode bit: 0
  334. <6>[ 1.329688] c1 =================================================================
  335. <6>[ 1.329761] c1 flash_onenand_probe: manufacturer_id = 0xf000
  336. <6>[ 1.329818] c1 flash_onenand_probe: device_id = 0xf001
  337. <6>[ 1.329869] c1 flash_onenand_probe: version_id = 0xf002
  338. <6>[ 1.329923] c1 flash_onenand_probe: data_buf_size = 0xf003
  339. <6>[ 1.329978] c1 flash_onenand_probe: boot_buf_size = 0xf004
  340. <6>[ 1.330031] c1 flash_onenand_probe: num_of_buffers = 0xf005
  341. <6>[ 1.330086] c1 flash_onenand_probe: technology = 0xf006
  342. <6>[ 1.330138] c1 =================================================================
  343. <6>[ 1.330204] c1 flash_onenand_probe: Detected an unsupported device
  344. <3>[ 1.330266] c1 msm_nand_probe: No nand device found
  345. <6>[ 1.330521] c1 tun: Universal TUN/TAP device driver, 1.6
  346. <6>[ 1.330576] c1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  347. <6>[ 1.330799] c1 rmnet_init: SMD devices[8]
  348. <6>[ 1.338564] c1 PPP generic driver version 2.4.2
  349. <6>[ 1.338814] c1 PPP BSD Compression module registered
  350. <6>[ 1.338868] c1 PPP Deflate Compression module registered
  351. <6>[ 1.342221] c1 PPP MPPE Compression module registered
  352. <6>[ 1.342281] c1 NET: Registered protocol family 24
  353. <7>[ 1.342456] c1 gpio_request: gpio-141 (i2c_host_vbus_en) status -22
  354. <3>[ 1.342516] c1 failed to request 141 GPIO
  355. <3>[ 1.342714] c1 clk_set_rate failed (-22)
  356. <3>[ 1.342854] c1 clk_set_rate failed (-22)
  357. <6>[ 1.343719] c1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  358. <6>[ 1.343963] c1 host driver registered w/ tranceiver
  359. <6>[ 1.344378] c1 usbcore: registered new interface driver cdc_acm
  360. <6>[ 1.344439] c1 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  361. <6>[ 1.344514] c1 Initializing USB Mass Storage driver...
  362. <6>[ 1.344679] c1 usbcore: registered new interface driver usb-storage
  363. <6>[ 1.344739] c1 USB Mass Storage support registered.
  364. <6>[ 1.344846] c1 usbcore: registered new interface driver ums-alauda
  365. <6>[ 1.344959] c1 usbcore: registered new interface driver ums-cypress
  366. <6>[ 1.345071] c1 usbcore: registered new interface driver ums-datafab
  367. <6>[ 1.345183] c1 usbcore: registered new interface driver ums-freecom
  368. <6>[ 1.345304] c1 usbcore: registered new interface driver ums-isd200
  369. <6>[ 1.345416] c1 usbcore: registered new interface driver ums-jumpshot
  370. <6>[ 1.345538] c1 usbcore: registered new interface driver ums-karma
  371. <6>[ 1.345649] c1 usbcore: registered new interface driver ums-onetouch
  372. <6>[ 1.345776] c1 usbcore: registered new interface driver ums-sddr09
  373. <6>[ 1.345888] c1 usbcore: registered new interface driver ums-sddr55
  374. <6>[ 1.345999] c1 usbcore: registered new interface driver ums-usbat
  375. <6>[ 1.346119] c1 usbcore: registered new interface driver usb_ehset_test
  376. <6>[ 1.346764] c1 peripheral driver registered w/ tranceiver
  377. <4>[ 1.347518] c1 msm72k_pullup: ui->usb_state = 0.
  378. <6>[ 1.347664] c1 mbim_init: initialize 1 instances
  379. <6>[ 1.347861] c1 mbim_init: Initialized 1 ports
  380. <7>[ 1.349714] c1 [mtp_setup] line = [1613]
  381. <6>[ 1.350551] c1 android_usb gadget: Mass Storage Function, version: 2009/09/11
  382. <6>[ 1.350628] c1 android_usb gadget: Number of LUNs=1
  383. <6>[ 1.350688] c1 lun0: LUN: removable read only CD-ROM file: (no medium)
  384. <6>[ 1.351173] c1 android_usb gadget: android_usb ready
  385. <6>[ 1.351601] c1 DUN is registerd
  386. <3>[ 1.352139] c1 melfas_ts_probe start.
  387. <3>[ 1.352186] c1 ts_power_enable off
  388. <3>[ 1.414093] c1 ts_power_enable on
  389. <3>[ 1.684501] c1 melfas_ts_probe: i2c_master_send() [0], Add[72]
  390. <6>[ 1.684659] c1 [TSP ISC] mms100_ISC_download_mbinary
  391. <6>[ 1.684713] c1 [TSP ISC] mms100_reset
  392. <6>[ 1.684751] c1 [TSP ISC] mms100_check_operating_mode
  393. <6>[ 1.687078] c1 End mms100_check_operating_mode()
  394. <6>[ 1.687126] c1 [TSP ISC] mms100_check_hwversion_mode
  395. <6>[ 1.689444] c1 [TSP ISC] mms100_open_mbinary
  396. <6>[ 1.689501] c1 End mms100_open_mbinary(), 0
  397. <6>[ 1.689544] c1 [TSP ISC] mms100_compare_version_info
  398. <6>[ 1.689594] c1 [TSP ISC] mms100_get_version_info
  399. <6>[ 1.694719] c1 TS : Section(0) version: 0x05
  400. <6>[ 1.694768] c1 TS : Section(0) Start Address: 0x00
  401. <6>[ 1.694818] c1 TS : Section(0) End Address: 0x00
  402. <6>[ 1.694866] c1 TS : Section(0) Compatibility: 0x00
  403. <6>[ 1.694916] c1 TS : Section(1) version: 0x54
  404. <6>[ 1.694961] c1 TS : Section(1) Start Address: 0x01
  405. <6>[ 1.695011] c1 TS : Section(1) End Address: 0x14
  406. <6>[ 1.695059] c1 TS : Section(1) Compatibility: 0x05
  407. <6>[ 1.695109] c1 TS : Section(2) version: 0x15
  408. <6>[ 1.695156] c1 TS : Section(2) Start Address: 0x15
  409. <6>[ 1.695204] c1 TS : Section(2) End Address: 0x1E
  410. <6>[ 1.695253] c1 TS : Section(2) Compatibility: 0x54
  411. <6>[ 1.695301] c1 End mms100_get_version_info()
  412. <6>[ 1.695346] c1 [TSP ISC] mms100_seek_section_info
  413. <6>[ 1.695508] c1 MBin : Section(0) Version: 0x05
  414. <6>[ 1.695556] c1 MBin : Section(0) Start Address: 0x00
  415. <6>[ 1.695608] c1 MBin : Section(0) End Address: 0x00
  416. <6>[ 1.695656] c1 MBin : Section(0) Compatibility: 0x05
  417. <6>[ 1.695708] c1 MBin : Section(1) Version: 0x54
  418. <6>[ 1.695756] c1 MBin : Section(1) Start Address: 0x01
  419. <6>[ 1.695806] c1 MBin : Section(1) End Address: 0x14
  420. <6>[ 1.695856] c1 MBin : Section(1) Compatibility: 0x05
  421. <6>[ 1.695908] c1 MBin : Section(2) Version: 0x15
  422. <6>[ 1.695954] c1 MBin : Section(2) Start Address: 0x15
  423. <6>[ 1.696006] c1 MBin : Section(2) End Address: 0x1E
  424. <6>[ 1.696054] c1 MBin : Section(2) Compatibility: 0x54
  425. <6>[ 1.696104] c1 End mms100_seek_section_info()
  426. <4>[ 1.696149] c1 [TSP] BOOT update section_update_flag[0] = 0
  427. <4>[ 1.696203] c1 [TSP] CORE update section_update_flag[1] = 0
  428. <4>[ 1.696256] c1 [TSP] CONF update section_update_flag[2] = 0
  429. <6>[ 1.696313] c1 !section_update_flag(1), 0x05, 0x05
  430. <6>[ 1.696359] c1 End mms100_compare_version_info()
  431. <6>[ 1.696408] c1 [TSP ISC] mms100_enter_ISC_mode
  432. <6>[ 1.747546] c1 End mms100_enter_ISC_mode()
  433. <6>[ 1.747593] c1 [TSP ISC] mms100_enter_config_update
  434. <6>[ 1.751573] c1 End mms100_enter_config_update()
  435. <6>[ 1.751621] c1 [TSP ISC] mms100_ISC_clear_validate_markers
  436. <6>[ 1.751674] c1 End mms100_ISC_clear_validate_markers()
  437. <6>[ 1.751724] c1 [TSP ISC] mms100_update_section_data
  438. <6>[ 1.751773] c1 update flag (0)
  439. <6>[ 1.751806] c1 update flag (0)
  440. <6>[ 1.751839] c1 update flag (0)
  441. <6>[ 1.751873] c1 End mms100_update_section_data()
  442. <6>[ 1.751919] c1 [TSP ISC] mms100_reset
  443. <6>[ 1.751956] c1 FIRMWARE_UPDATE_FINISHED!!!
  444. <6>[ 1.751999] c1 [TSP ISC] mms100_reset
  445. <6>[ 1.752038] c1 [TSP ISC] mms100_close_mbinary
  446. <6>[ 1.752086] c1 End mms100_close_mbinary()
  447. <3>[ 1.752128] c1 ts_power_enable off
  448. <6>[ 1.804291] c1 android_work: android_work: did not send uevent (0 0 (null))
  449. <3>[ 1.814093] c1 ts_power_enable on
  450. <3>[ 2.024143] c1 mcsdl_download_binary_data : [0]
  451. <6>[ 2.024633] c1 input: sec_touchscreen as /devices/virtual/input/input0
  452. <3>[ 2.024851] c1 melfas_ts_probe: trying to request irq: sec_touch-283
  453. <3>[ 2.025216] c1 touch_ta_noti; enable = 1
  454. <3>[ 2.025261] c1 mms_set_noise_mode ts_status = 1, 0
  455. <3>[ 2.025311] c1 melfas_ts_probe: succeed to register input device
  456. <3>[ 2.025368] c1 melfas_ts_probe: register earlysuspend.
  457. <6>[ 2.026331] c1 GPIO Matrix Keypad Driver: Start keypad matrix for 7x27a_kp in interrupt mode
  458. <6>[ 2.026801] c1 input: 7x27a_kp as /devices/virtual/input/input1
  459. <6>[ 2.031019] c1 using rtc device, msm_rtc, for alarms
  460. <6>[ 2.031113] c1 rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
  461. <6>[ 2.032091] c1 rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
  462. <6>[ 2.032223] c1 i2c /dev entries driver
  463. <3>[ 2.034984] c1 msm_sensor_i2c_probe s5k4ecgx_i2c_probe called
  464. <3>[ 2.035141] c1 msm_eeprom_probe probe_fail
  465. <6>[ 2.035688] c1 msm_sensor_register mctl_node_name[0] = video1
  466. <3>[ 2.035871] c1 [sr030pc50_i2c_probe:1292] sr030pc50_i2c_probe called
  467. <3>[ 2.035936] c1 [sr030pc50_i2c_probe:1335] sr030pc50_probe succeeded!
  468. <3>[ 2.036006] c1 msm_eeprom_probe probe_fail
  469. <6>[ 2.036533] c1 msm_sensor_register mctl_node_name[1] = video3
  470. <6>[ 2.038054] c1 I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  471. <6>[ 2.038326] c1 [FAN54013] fan54013_init
  472. <6>[ 2.038423] c1 +++++++++++++++ fan54013_probe +++++++++++++++
  473. <6>[ 2.039889] c1 [fan54013_get_ic_info] FAN54013 - REV 1.0
  474. <6>[ 2.046698] c1 /FAN54013/ 0xD2 0x40 0xAA 0x94 0x8B 0x00 0x47 0xCF
  475. <4>[ 2.046811] c1 i2c-core: driver [fan54013] using legacy resume method
  476. <6>[ 2.046891] c1 fan54013_init[FAN54013] added driver fan54013, (err: 0)
  477. <6>[ 2.046953] c1 bq27425_init[bq27425]bq27425_init entry
  478. <6>[ 2.047069] c1 bq27425_probe[BATT] bq27425 probe: fuel_gauge_probe
  479. <3>[ 2.047761] c1 i2c i2c-6: sendbytes: NAK bailout.
  480. <3>[ 2.047839] c1 bq27425 6-0055: bq27425_write_reg: err -5
  481. <6>[ 2.050684] c1 [BATT] seal read cfg code data0 0x8
  482. <6>[ 2.050734] c1 [BATT]seal read cfg code data1 0x0
  483. <6>[ 2.050783] c1 bq27425_probe [BATT] CFG Write Sucess :8
  484. <6>[ 2.050893] c1 bq27425_init[bq27425] added driver bq27425, (err: 0)
  485. <6>[ 2.052239] c1 msm_adc successfully registered
  486. <6>[ 2.052288] c1 msm_adc successfully registered
  487. <6>[ 2.053116] c1 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  488. <6>[ 2.053403] c1 Bluetooth: HCI UART driver ver 2.2
  489. <6>[ 2.053456] c1 Bluetooth: HCI H4 protocol initialized
  490. <6>[ 2.053506] c1 Bluetooth: HCI BCSP protocol initialized
  491. <6>[ 2.053559] c1 Bluetooth: HCI_IBS protocol initialized
  492. <6>[ 2.053988] c1 Bluetooth: MSM Sleep Mode Driver Ver 1.1
  493. <6>[ 2.054579] c1 Bluetooth: BT_HOST_WAKE IRQ registered
  494. <6>[ 2.055844] c1 mmc0: SDCC Version: 0x00000000
  495. <3>[ 2.056066] c1 mmc0: No card detect facilities available
  496. <6>[ 2.057421] c1 mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 80,0 dma 7 dmacrcri 12
  497. <6>[ 2.057499] c0 mmc0 : mmc_rescan(): start
  498. <6>[ 2.057549] c1 mmc0: Controller capabilities: 0x00000001
  499. <6>[ 2.057601] c0 mmc0: mmc_rescan_try_freq: trying to init card at 144000 Hz
  500. <6>[ 2.057669] c1 mmc0: 8 bit data mode enabled
  501. <6>[ 2.057718] c1 mmc0: 4 bit data mode disabled
  502. <6>[ 2.057766] c1 mmc0: polling status mode disabled
  503. <6>[ 2.057819] c1 mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  504. <6>[ 2.057884] c1 mmc0: Slot eject status = 0
  505. <6>[ 2.057929] c1 mmc0: Power save feature enable = 1
  506. <6>[ 2.057984] c1 mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x2ef20000
  507. <6>[ 2.058058] c1 mmc0: DM cmd busaddr 0x2ef20000, cmdptr busaddr 0x2ef37f40
  508. <6>[ 2.058831] c1 mmc1: SDCC Version: 0x00000000
  509. <3>[ 2.059446] c1 MAKE SYSFS
  510. <7>[ 2.059479] c1 msmsdcc_probe : Change sysfs Card Detect
  511. <6>[ 2.061048] c1 mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 56,350 dma 8 dmacrcri 6
  512. <6>[ 2.061131] c1 mmc1: Controller capabilities: 0x00000001
  513. <6>[ 2.061184] c1 mmc1: 8 bit data mode disabled
  514. <6>[ 2.061228] c1 mmc1: 4 bit data mode enabled
  515. <6>[ 2.061273] c1 mmc1: polling status mode disabled
  516. <6>[ 2.061323] c1 mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  517. <6>[ 2.061384] c1 mmc1: Slot eject status = 1
  518. <6>[ 2.061428] c1 mmc1: Power save feature enable = 1
  519. <6>[ 2.061479] c1 mmc1: DM non-cached buffer at ffd60000, dma_addr 0x2ef60000
  520. <6>[ 2.061548] c1 mmc1: DM cmd busaddr 0x2ef60000, cmdptr busaddr 0x2ef77f40
  521. <6>[ 2.062264] c1 mmc2: SDCC Version: 0x00000000
  522. <4>[ 2.062468] c1 wlan_status entered
  523. <4>[ 2.062509] c1 register_wlan_status_notify --enter
  524. <6>[ 2.063898] c1 mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 58,0 dma 8 dmacrcri 7
  525. <6>[ 2.063976] c1 mmc2: Controller capabilities: 0x00000001
  526. <6>[ 2.064029] c1 mmc2: 8 bit data mode disabled
  527. <6>[ 2.064131] c1 mmc2: 4 bit data mode enabled
  528. <6>[ 2.064178] c1 mmc2: polling status mode disabled
  529. <6>[ 2.064228] c1 mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  530. <6>[ 2.064289] c1 mmc2: Slot eject status = 1
  531. <6>[ 2.064333] c1 mmc2: Power save feature enable = 1
  532. <6>[ 2.064384] c1 mmc2: DM non-cached buffer at ffd40000, dma_addr 0x2ef80000
  533. <6>[ 2.064449] c1 mmc2: DM cmd busaddr 0x2ef80000, cmdptr busaddr 0x2ef97f40
  534. <6>[ 2.068663] c1 usbcore: registered new interface driver usbhid
  535. <6>[ 2.068723] c1 usbhid: USB HID core driver
  536. <6>[ 2.069903] c1 ashmem: initialized
  537. <4>[ 2.174096] c1
  538. <4>[ 2.174118] c1 ========== kernel thread : gaf-proc ==========
  539. <4>[ 2.174178] c1 task_struct at ee918d00
  540. <4>[ 2.174218] c1 thread_info at ee94e000
  541. <4>[ 2.174251] c1
  542. <4>[ 2.174278] c1 saved_cpu_context at ee94e01c
  543. <4>[ 2.174328] c1 ee94e01c r4 :c2224440 r5 :ee918d00 r6 :ee94e000 r7 :00000000
  544. <4>[ 2.174396] c1 ee94e02c r8 :ef240000 r9 :00000000 r10:ee81a1c0 r11:ee94ff2c
  545. <4>[ 2.174463] c1 ee94e03c sp :ee94fea0 pc :c058c3bc
  546. <4>[ 2.174503] c1
  547. <4>[ 2.174531] c1 searching saved pc which is stopped in down_interruptible() from ee94fea0 to ee950000
  548. <4>[ 2.174611] c1 down_interruptible() is from c00a7ed4 to c00a7e98
  549. <4>[ 2.174659] c1
  550. <4>[ 2.174686] c1 pc is not found
  551. <4>[ 2.174719] c1 ===================
  552. <4>[ 2.174749] c1
  553. <4>[ 2.174919] c1 logger: created 2048K log 'log_main'
  554. <4>[ 2.175089] c1 logger: created 256K log 'log_events'
  555. <4>[ 2.175251] c1 logger: created 2048K log 'log_radio'
  556. <4>[ 2.175436] c1 logger: created 256K log 'log_system'
  557. <6>[ 2.175493] c1 [TMP] gp2a_init, 838
  558. <6>[ 2.175596] c1 [TMP] gp2a_i2c_probe, 659
  559. <6>[ 2.175641] c1 gp2a_i2c_probe: 2f 0c
  560. <6>[ 2.175966] c1 input: Unspecified device as /devices/virtual/input/input2
  561. <6>[ 2.176879] c1 gp2a_setup_irq: request_irq(285) success for gpio 29
  562. <6>[ 2.178931] c1 Thanks to into sensors_register
  563. <6>[ 2.178978] c1 The Class is created
  564. <6>[ 2.179178] c1 [TMP] gp2a_i2c_probe, 746
  565. <6>[ 2.179219] c1 done
  566. <6>[ 2.180003] c1 Bosch Sensortec Device detected!
  567. <6>[ 2.180044] c1 BMA255 registered I2C driver!
  568. <6>[ 2.182231] c1 input: bma2x2 as /devices/virtual/input/input3
  569. <6>[ 2.182731] c1 bma2x2 place of bma in bmc150: 3
  570. <6>[ 2.182779] c1 bma2x2_setup_irq
  571. <6>[ 2.183574] c1 bma2x2_get_motion_interrupt: ACC_INT_STATUS 0
  572. <6>[ 2.183728] c1 bma2x2_setup_irq: irq = 342
  573. <6>[ 2.183774] c1 Thanks to into sensors_register
  574. <6>[ 2.183819] c1 The Class is created
  575. <6>[ 2.184443] c1
  576. <6>[ 2.184464] c1 [I]<6><><bmm_probe><1289>function entrance
  577. <6>[ 2.200334] c0 mmc0: ext_csd[EXT_CSD_BKOPS_EN] = 0
  578. <6>[ 2.214553] c1
  579. <6>[ 2.214573] c1 [I]<6><><bmm_wakeup><242>waking up the chip...
  580. <6>[ 2.224449] c0 mmc0: new high speed MMC card at address 0001
  581. <6>[ 2.225276] c0 mmcblk0: mmc0:0001 L7U00M 7.28 GiB
  582. <6>[ 2.232943] c0 mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 >
  583. <6>[ 2.236106] c1
  584. <6>[ 2.236126] c1 [I]<6><><bmm_wakeup><259>wake up result: succeed, tried times: 1
  585. <6>[ 2.236199] c1
  586. <6>[ 2.236218] c1 [I]<6><><bmm_probe><1315>register dump after waking up
  587. <7>[ 2.236299] c1 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
  588. <7>[ 2.236351] c1
  589. <4>[ 2.237341] c0 mmcblk0: p24 size 56032448 extends beyond EOD, truncated
  590. <6>[ 2.238771] c0 mmc_rescan(): end
  591. <6>[ 2.238826] c0 mmc1 : mmc_rescan(): start
  592. <6>[ 2.238886] c0 mmc1: mmc_rescan_try_freq: trying to init card at 144000 Hz
  593. <7>[ 2.243954] c1 32 05 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
  594. <7>[ 2.244004] c1 00 00 00 ff 00 00 b2 42 00 90 46 63 d9 00 00 00
  595. <7>[ 2.244058] c1 68 41 00 00 1e 1e 14 00 c3 02 65 5d 35 19 00 00
  596. <7>[ 2.244111] c1 fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  597. <7>[ 2.244159] c1
  598. <6>[ 2.244756] c1
  599. <6>[ 2.244776] c1 [I]<6><><bmm_check_chip_id><193>read chip id result: 0x32
  600. <5>[ 2.244844] c1
  601. <5>[ 2.244863] c1 [N]<5><><bmm_probe><1321>Bosch Sensortec Device bmm050 detected: 0x12
  602. <6>[ 2.245258] c1 input: bmm050 as /devices/virtual/input/input4
  603. <6>[ 2.245551] c1
  604. <6>[ 2.245569] c1 [I]<6><><bmm_probe><1370>platform data of bmm bmc150: place: 3, irq: 0
  605. <6>[ 2.245643] c1 Thanks to into sensors_register
  606. <6>[ 2.245689] c1 The Class is created
  607. <7>[ 2.257376] c1 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
  608. <7>[ 2.257426] c1
  609. <7>[ 2.264946] c1 32 05 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
  610. <7>[ 2.264994] c1 00 04 0f ff 00 00 b2 42 00 90 46 63 d9 00 00 00
  611. <7>[ 2.265044] c1 68 41 00 00 1e 1e 14 00 c3 02 65 5d 35 19 00 00
  612. <7>[ 2.265093] c1 fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  613. <7>[ 2.265141] c1
  614. <5>[ 2.266093] c1
  615. <5>[ 2.266111] c1 [N]<5><><bmm_probe><1437>sensor bmm050 probed successfully
  616. <6>[ 2.267529] c1 msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  617. <3>[ 2.268543] c1 msm_soc: ALSA MSM Mixer Setting
  618. <6>[ 2.268989] c1 asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  619. <6>[ 2.270133] c1 __msm_rpc_connect: server not found 30000002:20001
  620. <7>[ 2.270199] c1 msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
  621. <6>[ 2.270761] c1 oprofile: using arm/armv7
  622. <6>[ 2.270993] c1 Netfilter messages via NETLINK v0.30.
  623. <6>[ 2.271139] c1 nf_conntrack version 0.5.0 (13478 buckets, 53912 max)
  624. <6>[ 2.272324] c1 ctnetlink v0.93: registering with nfnetlink.
  625. <6>[ 2.272444] c1 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  626. <6>[ 2.272513] c1 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  627. <6>[ 2.272898] c1 xt_time: kernel timezone is -0000
  628. <6>[ 2.273688] c1 ip_tables: (C) 2000-2006 Netfilter Core Team
  629. <6>[ 2.274183] c1 arp_tables: (C) 2002 David S. Miller
  630. <6>[ 2.274336] c1 TCP: cubic registered
  631. <6>[ 2.275211] c1 NET: Registered protocol family 10
  632. <6>[ 2.278533] c1 Mobile IPv6
  633. <6>[ 2.278634] c1 ip6_tables: (C) 2000-2006 Netfilter Core Team
  634. <6>[ 2.278986] c1 IPv6 over IPv4 tunneling driver
  635. <6>[ 2.281001] c1 NET: Registered protocol family 17
  636. <6>[ 2.281098] c1 NET: Registered protocol family 15
  637. <6>[ 2.281548] c1 Bluetooth: RFCOMM TTY layer initialized
  638. <6>[ 2.281621] c1 Bluetooth: RFCOMM socket layer initialized
  639. <6>[ 2.281674] c1 Bluetooth: RFCOMM ver 1.11
  640. <6>[ 2.281721] c1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  641. <6>[ 2.281776] c1 Bluetooth: BNEP filters: protocol multicast
  642. <6>[ 2.281833] c1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  643. <6>[ 2.283466] c1 VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  644. <6>[ 2.283583] c1 ThumbEE CPU extension supported.
  645. <5>[ 2.283641] c1 Registering SWP/SWPB emulation handler
  646. <6>[ 2.287709] c1 clock_late_init: Removing enables held for handed-off clocks
  647. <6>[ 2.289281] c1 cpufreq: cpu0 init at 600000 switching to 480000
  648. <6>[ 2.292288] c1 input: 7k_handset as /devices/virtual/input/input5
  649. <6>[ 2.294854] c1 msm_cpr_probe: CPR: driver registered successfully
  650. <6>[ 2.295614] c1 sec_jack:sec_jack_probe : Registering jack driver
  651. <6>[ 2.295813] c1 input: sec_jack as /devices/virtual/input/input6
  652. <6>[ 2.296384] c1 sec_jack:sec_jack_send_key_irq_thread : ignored button (0 1 1)
  653. <7>[ 2.296641] c1 gpio_set_debounce: gpio-37 status -22
  654. <6>[ 2.296889] c1 input: gpio-keys as /devices/platform/gpio-keys/input/input7
  655. <6>[ 2.297014] c1 [KEY] keycode, 0
  656. <6>[ 2.297806] c1 rs30000048 rs30000048.262144: setting system clock to 2022-05-23 22:49:41 UTC (1653346181)
  657. <6>[ 2.297883] c1 msm_batt_init: enter
  658. <6>[ 2.298096] c1 __msm_rpc_connect: server not found 30000089:40001
  659. <6>[ 2.298153] c1 __msm_rpc_connect: server not found 30000089:10001
  660. <6>[ 2.298201] c1 __msm_rpc_connect: server not found 30000089:20001
  661. <6>[ 2.299439] c1 msm_batt_register: got handle = 0
  662. <6>[ 2.299913] c1 msm_batt_enable_filter: enable vbatt filter: OK
  663. <6>[ 2.302311] c1 [BATTERY] get bat leel and voltage from fuelgauge
  664. <6>[ 2.302354] c1 [BATT] msm_battery_register_callback start
  665. <6>[ 2.302393] c1 msm_set_acc_type : [BATT] acc_status = 1
  666. <6>[ 2.302434] c1 msm_set_cable : [BATT] cable_status(1)
  667. <6>[ 2.302483] c1 msm_batt_set_cable_bt : [BATT] cable_status(1)
  668. <6>[ 2.302526] c1 [BATT] msm_batt_chg_en: Start charging! (USB)
  669. <6>[ 2.303019] c1 _fan54013_set_iocharge: IOCHARGE = 550mA with 68m Rsense
  670. <6>[ 2.303856] c1 _fan54013_set_iocharge: INLIM = 500mA
  671. <6>[ 2.304168] c0 [KEY] keycode, 0
  672. <6>[ 2.304749] c1 _fan54013_set_iterm: ITERM 194mA
  673. <6>[ 2.304901] c0 mmc_rescan(): end
  674. <6>[ 2.304938] c0 mmc2 : mmc_rescan(): start
  675. <6>[ 2.304984] c0 mmc2: mmc_rescan_try_freq: trying to init card at 144000 Hz
  676. <6>[ 2.305453] c0 [BATT] msm_batt_probe : success!
  677. <6>[ 2.305609] c0 msm_batt_update_psy_status: enter
  678. <6>[ 2.305789] c0 msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
  679. <6>[ 2.306219] c0 [BATT] msm_batt_get_batt_chg_status: [v1p->] charger_status= 3, charger_type= 0, battery_status= 0, battery_level= 2, battery_voltage= 4200, battery_temp= 25, battery_temp_adc= 474, chg_current= 0,batt_id= 0
  680. <6>[ 2.309998] c1 /FAN54013/ 0xD0 0x48 0xAA 0x94 0x8B 0x00 0x47 0xCB
  681. <6>[ 2.310048] c1 [BATT] msm_batt_chg_en: Start charging! (0x4, full_check = 0, full_rechg = 0)
  682. <6>[ 2.310213] c1 msm_batt_set_cable_bt : [BATT] batt_status(1) charger_type(2) source(4)
  683. <6>[ 2.310273] c1 [BATT] timer setting enable
  684. <6>[ 2.311171] c0 msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4354, temp_ap 23 temp_cp : 0, current_fg : 133 cur_cp :0 status 1battery_temp_adc
  685. <6>[ 2.313744] c0 [BATT] msm_batt_update_psy_status: charger_status= 1, charger_type= 2,battery_status=0, battery_temp_adc=36,chg_current=0, battery_temp=360, health=1, status=1, soc=100, full_check=0, back_charging=0, FAN54013_status=2,
  686. <6>[ 2.314204] c0 ALSA device list:
  687. <6>[ 2.314238] c0 #0: msm-audio
  688. <4>[ 2.314334] c0 Warning: unable to open an initial console.
  689. <6>[ 2.314631] c0 Freeing init memory: 216K
  690. <6>[ 2.314719] c0 msm_batt_update_psy_status: exit
  691. <6>[ 2.314771] c0 msm_batt_update_psy_status: enter
  692. <6>[ 2.315573] c0 [BATT] msm_batt_get_batt_chg_status: [v1p->] charger_status= 3, charger_type= 0, battery_status= 0, battery_level= 2, battery_voltage= 4200, battery_temp= 25, battery_temp_adc= 474, chg_current= 0,batt_id= 0
  693. <6>[ 2.320808] c0 msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4354, temp_ap 360 temp_cp : 360, current_fg : 133 cur_cp :0 status 1battery_temp_adc
  694. <6>[ 2.323474] c0 [BATT] msm_batt_update_psy_status: charger_status= 1, charger_type= 2,battery_status=0, battery_temp_adc=36,chg_current=0, battery_temp=360, health=1, status=1, soc=100, full_check=0, back_charging=0, FAN54013_status=2,
  695. <6>[ 2.324204] c0 msm_batt_update_psy_status: exit
  696. <3>[ 2.330696] c1 healthd: wakealarm_init: timerfd_create failed
  697. <6>[ 2.357578] c0 mmc_rescan(): end
  698. <3>[ 2.431054] c1 init: /dev/hw_random not found
  699. <7>[ 2.431629] c1 usb: enable_store enabled:0 dev->enabled:0
  700. <3>[ 2.431673] c1 enable_store: android_usb: already disabled
  701. <3>[ 2.432159] c1 init: /dev/hw_random not found
  702. <3>[ 2.432251] c1 init: Unable to open persistent property directory /data/property errno: 2
  703. <7>[ 2.436418] c1 usb: enable_store enabled:0 dev->enabled:0
  704. <3>[ 2.436466] c0 healthd: wakealarm_init: timerfd_create failed
  705. <3>[ 2.436516] c1 enable_store: android_usb: already disabled
  706. <7>[ 2.437118] c1 usb: enable_store enabled:1 dev->enabled:0
  707. <7>[ 2.437169] c1 usb: enable_store f:adb
  708. <4>[ 2.437208] c1 android_disable: current disable_depth = 1.
  709. <4>[ 2.437249] c1 android_enable: current disable_depth = 2.
  710. <6>[ 2.442239] c0 adb_open
  711. <4>[ 2.442279] c0 android_enable: current disable_depth = 1.
  712. <6>[ 2.442359] c0 adb_bind_config
  713. <4>[ 2.442819] c0 msm72k_pullup_internal: is_active = 1 , pullup_internal is changed as high!!
  714. <6>[ 2.452559] c0 mdp_block_power_cnt[block=3] multiple power-off request
  715. <6>[ 2.544571] c1 _fan54013_handle_stat: charging
  716. <6>[ 2.578111] c1 EXT4-fs (mmcblk0p22): recovery complete
  717. <6>[ 2.578978] c1 EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:
  718. <6>[ 2.757143] c0 android_work: android_work: sent uevent USB_STATE=CONNECTED
  719. <7>[ 2.846141] c1 EXT4-fs (mmcblk0p24): ext4_orphan_cleanup: deleting unreferenced inode 120080
  720. <7>[ 2.846468] c1 EXT4-fs (mmcblk0p24): ext4_orphan_cleanup: deleting unreferenced inode 120072
  721. <6>[ 2.846663] c1 EXT4-fs (mmcblk0p24): 2 orphan inodes deleted
  722. <6>[ 2.846706] c1 EXT4-fs (mmcblk0p24): recovery complete
  723. <6>[ 2.855234] c1 EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
  724. <6>[ 2.880589] c1 EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  725. <7>[ 3.206224] c0 usb: set_config_number single config
  726. <7>[ 3.206269] c0 usb: set_interface_count next_interface_id=1
  727. <7>[ 3.206693] c0 usb: set_config_number single config
  728. <7>[ 3.206731] c0 usb: set_interface_count next_interface_id=1
  729. <6>[ 3.209198] c0 android_usb gadget: high-speed config #1: android
  730. <6>[ 3.264194] c0 android_work: android_work: sent uevent USB_STATE=CONFIGURED
  731. <6>[ 3.302163] c1 EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
  732. <6>[ 3.401853] c1 EXT4-fs (mmcblk0p12): recovery complete
  733. <6>[ 3.402659] c1 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
  734. <4>[ 3.434078] c0 usb_get_chg_type : return USB_CHG_TYPE__SDP
  735. <6>[ 3.434123] c0
  736. <6>[ 3.434136] c0 Charger Type: STD DOWNSTREAM PORT
  737. <6>[ 3.436171] c1 [BATT] msm_batt_cb_func: RPC_ACCEPTSTAT_SUCCESS !!
  738. <6>[ 3.436238] c0 msm_batt_update_psy_status: enter
  739. <6>[ 3.436776] c0 [BATT] msm_batt_get_batt_chg_status: [v1p->] charger_status= 0, charger_type= 2, battery_status= 0, battery_level= 2, battery_voltage= 4361, battery_temp= 25, battery_temp_adc= 0, chg_current= 0,batt_id= 0
  740. <6>[ 3.441446] c0 msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4354, temp_ap 360 temp_cp : 360, current_fg : 113 cur_cp :0 status 1battery_temp_adc
  741. <6>[ 3.444026] c0 [BATT] msm_batt_update_psy_status: charger_status= 1, charger_type= 2,battery_status=0, battery_temp_adc=36,chg_current=0, battery_temp=360, health=1, status=1, soc=100, full_check=0, back_charging=0, FAN54013_status=2,
  742. <6>[ 3.444326] c0 msm_batt_update_psy_status: exit
  743. <6>[ 3.503626] c1 EXT4-fs (mmcblk0p16): recovery complete
  744. <6>[ 3.504441] c1 EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  745. <6>[ 4.024081] c0 BL : 255, lcd_on : 1
  746. <6>[ 4.054071] c0 Bluetooth: [BT] bluesleep_tx_timer_expire jiffies=4294937702
  747. <4>[ 4.334099] c0 [PARAM] sec_open_param 127
  748. <6>[ 7.364073] c0 SDCC CH 2 : msmsdcc_runtime_suspend WLAN SKIP Suspend
  749. <3>[ 7.558076] c0 [DOG_KEEPALIVE] read xid : 0x1
  750. <3>[ 7.558184] c1 [DOG_KEEPALIVE] write xid : 1000000
  751. <3>[ 7.863876] c1 [TSP] ID: 0, State : 1
  752. <6>[ 7.863919] c1 set_freq_limit: 0x1 1209600, min 1209600, max 1209600
  753. <6>[ 7.863969] c1 [TSP] DVFS On![VIB] ON
  754. <4>[ 7.868949] c0 [VIB] Duration : 0 sec
  755. <4>[ 7.868978] c0 [VIB] timed_vibrator_on
  756. <4>[ 7.869024] c0 board_vibrator_ctrl on = 1 vib_status = 0
  757. <3>[ 7.885336] c1 [TSP] ID: 0, State : 1
  758. <3>[ 7.918601] c1 [TSP] ID: 0, State : 1
  759. <3>[ 7.940346] c1 [TSP] ID: 0, State : 0
  760. <6>[ 7.940383] c1 [TSP] DVFS_touch_release[VIB] vibrator_timer_func
  761. <4>[ 7.949096] c0 [VIB] timed_vibrator_off
  762. <4>[ 7.949153] c0 board_vibrator_ctrl on = 0 vib_status = 1
  763. <6>[ 8.034091] c1 set_freq_limit: 0x1 -1, min 245760, max 1209600
  764. <6>[ 8.034139] c1 [TSP] DVFS Off!
  765. <3>[ 8.954671] c0 gpio_tlmm_config(0x00064581, GPIO_CFG_DISABLE) <sdc3_clk> failed: 0
  766. <3>[ 8.954726] c0 pin 88 func 1 dir 1 pull 0 drvstr 3
  767. <3>[ 9.320344] c1 [TSP] ID: 0, State : 1
  768. <6>[ 9.320388] c1 set_freq_limit: 0x1 1209600, min 1209600, max 1209600
  769. <6>[ 9.320438] c1 [TSP] DVFS On!
  770. <3>[ 9.330866] c1 [TSP] ID: 0, State : 1
  771. <3>[ 9.352621] c0 wait_for_file: waiting for param block.
  772. <3>[ 9.419473] c1 [TSP] ID: 0, State : 0
  773. <6>[ 9.419513] c1 [TSP] DVFS_touch_release[VIB] ON
  774. <4>[ 9.420818] c1 [VIB] Duration : 0 sec
  775. <4>[ 9.420848] c1 [VIB] timed_vibrator_on
  776. <4>[ 9.420894] c1 board_vibrator_ctrl on = 1 vib_status = 0
  777. <4>[ 9.500951] c1 [VIB] vibrator_timer_func
  778. <4>[ 9.500986] c1 [VIB] timed_vibrator_off
  779. <4>[ 9.501036] c1 board_vibrator_ctrl on = 0 vib_status = 1
  780. <6>[ 9.514074] c1 set_freq_limit: 0x1 -1, min 245760, max 1209600
  781. <6>[ 9.514121] c1 [TSP] DVFS Off!
  782. <3>[ 9.997508] c1 [TSP] ID: 0, State : 1
  783. <6>[ 9.997549] c1 set_freq_limit: 0x1 1209600, min 1209600, max 1209600
  784. <6>[ 9.997594] c1 [TSP] DVFS On!
  785. <3>[ 10.030264] c1 [TSP] ID: 0, State : 1
  786. <3>[ 10.052586] c1 [TSP] ID: 0, State : 1
  787. <3>[ 10.063604] c1 [TSP] ID: 0, State : 1
  788. <3>[ 10.085566] c1 [TSP] ID: 0, State : 0
  789. <6>[ 10.085606] c1 [TSP] DVFS_touch_release[VIB] ON
  790. <4>[ 10.087614] c0 [VIB] Duration : 0 sec
  791. <4>[ 10.087644] c0 [VIB] timed_vibrator_on
  792. <4>[ 10.088433] c0 board_vibrator_ctrl on = 1 vib_status = 0
  793. <4>[ 10.167689] c0 [VIB] vibrator_timer_func
  794. <4>[ 10.167724] c0 [VIB] timed_vibrator_off
  795. <4>[ 10.167769] c0 board_vibrator_ctrl on = 0 vib_status = 1
  796. <6>[ 10.184084] c1 set_freq_limit: 0x1 -1, min 245760, max 1209600
  797. <6>[ 10.184129] c1 [TSP] DVFS Off!
  798. <3>[ 10.552359] c1 [TSP] ID: 0, State : 1
  799. <6>[ 10.552399] c1 set_freq_limit: 0x1 1209600, min 1209600, max 1209600
  800. <6>[ 10.552446] c1 [TSP] DVFS On!
  801. <3>[ 10.585103] c1 [TSP] ID: 0, State : 1
  802. <3>[ 10.607484] c1 [TSP] ID: 0, State : 1
  803. <3>[ 10.618663] c1 [TSP] ID: 0, State : 1
  804. <3>[ 10.640401] c1 [TSP] ID: 0, State : 0
  805. <6>[ 10.640469] c1 [TSP] DVFS_touch_release[VIB] ON
  806. <4>[ 10.642733] c0 [VIB] Duration : 0 sec
  807. <4>[ 10.642763] c0 [VIB] timed_vibrator_on
  808. <4>[ 10.643588] c0 board_vibrator_ctrl on = 1 vib_status = 0
  809. <4>[ 10.722816] c0 [VIB] vibrator_timer_func
  810. <4>[ 10.722849] c0 [VIB] timed_vibrator_off
  811. <4>[ 10.722896] c0 board_vibrator_ctrl on = 0 vib_status = 1
  812. <6>[ 10.734084] c1 set_freq_limit: 0x1 -1, min 245760, max 1209600
  813. <6>[ 10.734131] c1 [TSP] DVFS Off!
  814. <6>[ 11.054629] c1 [BATT] msm_batt_cb_func: RPC_ACCEPTSTAT_SUCCESS !!
  815. <6>[ 11.054699] c0 msm_batt_update_psy_status: enter
  816. <6>[ 11.055276] c0 [BATT] msm_batt_get_batt_chg_status: [v1p->] charger_status= 0, charger_type= 2, battery_status= 0, battery_level= 2, battery_voltage= 4361, battery_temp= 80, battery_temp_adc= 569, chg_current= 0,batt_id= 33
  817. <6>[ 11.059984] c0 msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4353, temp_ap 360 temp_cp : 360, current_fg : 119 cur_cp :0 status 1battery_temp_adc
  818. <6>[ 11.062566] c0 [BATT] msm_batt_update_psy_status: charger_status= 1, charger_type= 2,battery_status=0, battery_temp_adc=36,chg_current=0, battery_temp=360, health=1, status=1, soc=100, full_check=0, back_charging=0, FAN54013_status=2,
  819. <6>[ 11.062923] c0 msm_batt_update_psy_status: exit
  820. <3>[ 14.366166] c0 wait_for_file: waiting for param block.
  821. <3>[ 19.378804] c0 wait_for_file: waiting for param block.
  822. <3>[ 20.024658] c0 gpio_tlmm_config(0x00064581, GPIO_CFG_DISABLE) <sdc3_clk> failed: 0
  823. <3>[ 20.024714] c0 pin 88 func 1 dir 1 pull 0 drvstr 3
  824. <6>[ 21.074084] c0 msm_batt_update_psy_status: enter
  825. <6>[ 21.074749] c0 [BATT] msm_batt_get_batt_chg_status: [v1p->] charger_status= 0, charger_type= 2, battery_status= 0, battery_level= 2, battery_voltage= 4361, battery_temp= 80, battery_temp_adc= 558, chg_current= 0,batt_id= 33
  826. <6>[ 21.079419] c0 msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4353, temp_ap 360 temp_cp : 360, current_fg : 130 cur_cp :0 status 1battery_temp_adc
  827. <6>[ 21.081999] c0 [BATT] msm_batt_update_psy_status: charger_status= 1, charger_type= 2,battery_status=0, battery_temp_adc=36,chg_current=0, battery_temp=360, health=1, status=1, soc=100, full_check=0, back_charging=0, FAN54013_status=2,
  828. <6>[ 21.082364] c0 msm_batt_update_psy_status: exit
  829. <3>[ 24.391563] c0 wait_for_file: waiting for param block.
  830. <3>[ 24.576311] c0 [DOG_KEEPALIVE] read xid : 0x3
  831. <3>[ 24.576414] c1 [DOG_KEEPALIVE] write xid : 3000000
  832. <3>[ 29.404143] c0 wait_for_file: waiting for param block.
  833. <4>[ 29.504506] c1 adbd (128): /proc/128/oom_adj is deprecated, please use /proc/128/oom_score_adj instead.
  834. <6>[ 31.094124] c0 msm_batt_update_psy_status: enter
  835. <6>[ 31.094948] c0 [BATT] msm_batt_get_batt_chg_status: [v1p->] charger_status= 0, charger_type= 2, battery_status= 0, battery_level= 2, battery_voltage= 4361, battery_temp= 80, battery_temp_adc= 547, chg_current= 0,batt_id= 33
  836. <6>[ 31.100026] c0 msm_batt_update_psy_status [BATTERY] Rev05 level : 100, voltage : 4353, temp_ap 360 temp_cp : 360, current_fg : 120 cur_cp :0 status 1battery_temp_adc
  837. <6>[ 31.103426] c0 [BATT] msm_batt_update_psy_status: charger_status= 1, charger_type= 2,battery_status=0, battery_temp_adc=36,chg_current=0, battery_temp=360, health=1, status=1, soc=100, full_check=0, back_charging=0, FAN54013_status=2,
  838. <6>[ 31.103896] c0 msm_batt_update_psy_status: exit
  839. <3>[ 34.424141] c0 wait_for_file: waiting for param block.
  840. <3>[ 34.474964] c1 [TSP] keyID : 1, touchstate : 128
  841. <3>[ 34.576746] c1 [TSP] keyID : 1, touchstate : 0
  842. ~ # uname -a
  843. Linux localhost 3.4.0-novafusion #1 Sun Jun 29 14:29:09 CEST 2014 armv7l GNU/Linux
  844. ~ #
  845.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!