U-Boot 2020.01 (Jan 06 2020 - 20:56:31 +0000) for ODROID-XU3/XU4/HC1/HC2

CPU:   Exynos5422 @ 800 MHz
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Odroid XU3 based on EXYNOS5422
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc2 is current device
Scanning mmc 2:1...
MMC Device 1 not found
no mmc device at slot 1
Card did not respond to voltage select!
starting USB...
Bus ehci@12110000: USB EHCI 1.00
Bus xhci@12000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
Bus xhci@12400000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus ehci@12110000 for devices... 1 USB Device(s) found
scanning bus xhci@12000000 for devices... cannot reset port 1!?
1 USB Device(s) found
scanning bus xhci@12400000 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Waiting for Ethernet connection... done.
BOOTP broadcast 1
DHCP client bound to address 192.168.0.184 (4 ms)
*** Warning: no boot file name; using 'C0A800B8.img'
Using r8152#0 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.184
Filename 'C0A800B8.img'.
Load address: 0x43e00000
Loading: T