#!/bin/bash

if [ -z "$1" ]; then
	PORT="ttyUSB0"
else
	PORT=$1
fi

echo "Make sure the Arduino IDE Serial monitor is closed"

echo "Erasing old image"
sudo esptool.py --port /dev/$PORT --baud 115200 erase_flash

if [ $? != 0 ]; then
    echo "Failed!";

    exit 1;
fi

echo "Flashing Firmware"
sudo  esptool.py --port /dev/$PORT  --baud 115200 write_flash \
	--flash_size=detect \
	0xFB000 blank.bin \
	0xFC000 esp_init_data_default.bin \
	0x7E000 blank.bin \
	0xFE000 blank.bin \
	0x00000 boot_v1.6.bin \
	0x01000 at/512+512/user1.1024.new.2.bin