API tools faq
paste
Advertisement
YorkLTx

S14

YorkLTx
Oct 28th, 2017
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.33 KB | None | 0 0
raw download clone embed print report
  1. [2017-10-27 19:10:25] [Output] : ★ Lukas Ruiz reaches for the toolbox, grasping a torque wrench, along with a few more tools.
  2. [2017-10-27 19:11:00] [Output] : ★ Lukas Ruiz presses on the lift's button, lifting the car, as he would proceed to untighten the-
  3. [2017-10-27 19:11:15] [Output] : ★ 5 nuts holding the wheel in place, with the torque wrench. ((Lukas Ruiz))
  4. [2017-10-27 19:11:45] [Output] : ★ As the nuts would be out and the wheel loose, he would pull it off with a few wiggles. ((Lukas Ruiz))
  5. [2017-10-27 19:12:23] [Output] : ★ Lukas Ruiz slides the torque wrench behind the caliper, untightening the 2 nuts holding it onto-
  6. [2017-10-27 19:12:31] [Output] : ★ the disk. ((Lukas Ruiz))
  7. [2017-10-27 19:13:03] [Output] : ★ Lukas Ruiz pulls the caliper off, along with the mid-wear brake pads, storing them next to him.
  8. [2017-10-27 19:13:32] [Output] : ★ Lukas Ruiz then reaches for the brake disk, carefully dragging it off of the hub, storing it-
  9. [2017-10-27 19:13:37] [Output] : ★ next to the caliper & pads. ((Lukas Ruiz))
  10. [2017-10-27 19:14:03] [Output] : ★ Lukas Ruiz then grasps back the torque wrench, sliding it on the center of the hub,
  11. [2017-10-27 19:14:26] [Output] : ★ proceeding to pull it outwards, off of it's mount. ((Lukas Ruiz))
  12. [2017-10-27 19:14:59] [Output] : ★ As the hub would be off of the knuckle, Lukas grasps the torque back, sliding it- ((Lukas Ruiz))
  13. [2017-10-27 19:15:18] [Output] : ★ under the coilover, as he would untighten the lower part of it. ((Lukas Ruiz))
  14. [2017-10-27 19:15:37] [Output] : ★ Lukas Ruiz quickly slides his hand over the lift's control panel, lowering it a little.
  15. [2017-10-27 19:15:58] [Output] : ★ Lukas Ruiz drags himself inside the car, pulling the hood lever.
  16. [2017-10-27 19:16:39] [Output] : ★ Lukas Ruiz reaches for the hood, sliding his hand between it and the grill, popping it open.
  17. [2017-10-27 19:17:19] [Output] : ★ Lukas Ruiz grasps a wrench from the toolbox, untightening the coilover's top mounts, loosening it.
  18. [2017-10-27 19:17:38] [Output] : ★ Lukas Ruiz then slides himself under the car, pulling the coilover out completely.
  19. [2017-10-27 19:18:31] [Output] : ★ Stores the coilover on the workbench next to the car, next to the other stuff. ((Lukas Ruiz))
  20. [2017-10-27 19:19:02] [Output] : ★ Lukas Ruiz lifts the car back up, as he would quickly inspect the steering knuckle.
  21. [2017-10-27 19:19:38] [Output] : ★ Lukas Ruiz grasps a wrench back from the toolbox, untightening the top mount of the-
  22. [2017-10-27 19:19:50] [Output] : ★ knuckle, which would be holding it together with the upper control arm. ((Lukas Ruiz))
  23. [2017-10-27 19:20:11] [Output] : ★ Lukas Ruiz then moves towards the spot where the knuckle would meet with the lower-
  24. [2017-10-27 19:20:23] [Output] : ★ control arm, untightening the nut carefully. ((Lukas Ruiz))
  25. [2017-10-27 19:20:59] [Output] : ★ Lukas Ruiz pulls the knuckle off, storing it away as it wouldn't be used from now on.
  26. [2017-10-27 19:21:32] [Output] : ★ With the wrench, he would then proceed to fully remove both upper and lower- ((Lukas Ruiz))
  27. [2017-10-27 19:21:46] [Output] : ★ control arms from the sub-frame, untightening the nuts holding them tight, as he would- ((Lukas Ruiz))
  28. [2017-10-27 19:21:55] [Output] : ★ also store these away, next to the knuckle. ((Lukas Ruiz))
  29.  
  30. [2017-10-27 19:22:22] [Output] : ★ Lukas Ruiz finally reaches onto the outer tie rod, wrapping around his hands a special tool he-
  31. [2017-10-27 19:22:42] [Output] : ★ had bought a few weeks back for another project, which he would remove the- ((Lukas Ruiz))
  32. [2017-10-27 19:22:45] [Output] : ★ rod with. ((Lukas Ruiz))
  33. [2017-10-27 19:23:00] [Output] : ★ Lukas Ruiz wraps it around the far end of the outer tie rod, twisting it counter-clockwise, loosening it.
  34. [2017-10-27 19:23:30] [Output] : ★ Lukas Ruiz stores it on the workbench, to be re-used just in a few minutes, next to the coilover etc.
  35. [2017-10-27 19:23:50] [Output] : ★ As the car would be free from the old steering parts, Lukas would start assembling- ((Lukas Ruiz))
  36. [2017-10-27 19:23:57] [Output] : ★ te new wisefab kit. ((Lukas Ruiz))
  37. [2017-10-27 19:24:20] [Output] : ★ Lukas Ruiz takes ahold of the cardboard box standing ontop of the workbench, ripping the tape off-
  38. [2017-10-27 19:24:32] [Output] : ★ on the top of it, revealing the steering kit inside. ((Lukas Ruiz))
  39. [2017-10-27 19:25:49] [Output] : ★ Lukas Ruiz takes the components out of the box, displaying them on the workbench, as he would-
  40. [2017-10-27 19:25:55] [Output] : ★ throw the cardboard box away. ((Lukas Ruiz))
  41. [2017-10-27 19:26:11] [Output] : ★ Lukas Ruiz grasps the used wheel hub, giving it a quick clean with a brush and degreasent.
  42. [2017-10-27 19:26:32] [Output] : ★ Lukas Ruiz slides it on the new blue wisefab stering knuckle, grasping a set of screws,
  43. [2017-10-27 19:26:39] [Output] : ★ tightely securing both onto eachother. ((Lukas Ruiz))
  44. [2017-10-27 19:27:15] [Output] : ★ Lukas Ruiz previously applies a bit of Lactite on them.
  45. [2017-10-27 19:27:34] [Output] : ★ Lukas Ruiz grabs the jib assembly, as he would drag it towards the car, along with a few screws,
  46. [2017-10-27 19:27:38] [Output] : ★ and a wrench. ((Lukas Ruiz))
  47. [2017-10-27 19:27:58] [Output] : ★ Lukas Ruiz places it onto the sub-frame, securing it with a screws, and tightening it with the-
  48. [2017-10-27 19:28:01] [Output] : ★ wrench. ((Lukas Ruiz))
  49. [2017-10-27 19:28:18] [Output] : ★ Lukas Ruiz drags himself back to the workbench, grasping the outer tie rod back, along with it's mounting-
  50. [2017-10-27 19:28:24] [Output] : ★ tool he had previously used. ((Lukas Ruiz))
  51. [2017-10-27 19:28:48] [Output] : ★ Lukas Ruiz slides it onto the inner tie rod, quickly tightening with the tool, quickly aligning it-
  52. [2017-10-27 19:28:49] [Output] : ★ by eye. ((Lukas Ruiz))
  53. [2017-10-27 19:29:09] [Output] : ★ Lukas Ruiz then grasps the new wisefab lower control arm, mounting it under the outer tie rod
  54. [2017-10-27 19:29:31] [Output] : ★ and onto the sub-frame, as he would secure it with a couple of screws and a wrench. ((Lukas Ruiz))
  55. [2017-10-27 19:30:05] [Output] : ★ Lukas Ruiz proceeds to do the same with the upper control arm from the kit, sliding it on-
  56. [2017-10-27 19:30:34] [Output] : ★ the sub-frame, upon tightening it with a couple of screws, gradually, so it's- ((Lukas Ruiz))
  57. [2017-10-27 19:30:37] [Output] : ★ perfectly aligned. ((Lukas Ruiz))
  58. [2017-10-27 19:30:55] [Output] : ★ Lukas Ruiz checks the both arms' clearence, checking it they're moving accordingly and freely.
  59. [2017-10-27 19:31:37] [Output] : ★ iding it between the lower and upper control arms, and just infront of the tie rod, a few, ((Lukas Ruiz))
  60. [2017-10-27 19:31:41] [Output] : Lukas Ruiz: (( -* ))
  61. [2017-10-27 19:31:57] [Output] : ★ centimers away, due to the rod being hanging. ((Lukas Ruiz))
  62. [2017-10-27 19:32:25] [Output] : ★ As he would secure it onto the control arms, he would slide in the nuts, ((Lukas Ruiz))
  63. [2017-10-27 19:32:32] [Output] : ★ upon securing them with the wrench. ((Lukas Ruiz))
  64. [2017-10-27 19:33:00] [Output] : ★ Lukas Ruiz slides the tie rod into the knuckle, as he would tighten the single nut holding these-
  65. [2017-10-27 19:33:06] [Output] : ★ together with a regular wrench. ((Lukas Ruiz))
  66. [2017-10-27 19:33:36] [Output] : ★ Lukas Ruiz adjusts the hub's position correctly, facing outside at 90º.
  67. [2017-10-27 19:34:12] [Output] : ★ Lukas Ruiz lowers the lift back, as he would take ahold of the waiting moment-
  68. [2017-10-27 19:34:26] [Output] : ★ to take a sip of a water bottle standing on the workbench. ((Lukas Ruiz))
  69. [2017-10-27 19:34:57] [Output] : ★ Lukas Ruiz grasps the brake disk back, sliding it onto it's position in the car, tightly
  70. [2017-10-27 19:35:30] [Output] : ★ Lukas Ruiz slides the pads inside the caliper, mounting this one onto the brake disk.
  71. [2017-10-27 19:35:56] [Output] : ★ Lukas Ruiz grasps a couple of nuts from the workbench, sliding them on the hub, as he would-
  72. [2017-10-27 19:36:12] [Output] : ★ give them a slight twist with hsi hand, before fully tightening them with the torque. ((Lukas Ruiz))
  73. [2017-10-27 19:37:42] [Output] : ★ Lukas Ruiz connects all the braking lines, making sure everything around the hub-
  74. [2017-10-27 19:37:48] [Output] : ★ is fully tightened. ((Lukas Ruiz))
  75. [2017-10-27 19:37:58] [Output] : ★ Lukas Ruiz grasps the wheel from where he had left it next to the car, sliding it onto the hub.
  76. [2017-10-27 19:38:25] [Output] : ★ Lukas Ruiz grasps the set of 5 nuts, sliding them on the wheel, as he would fully tighten these-
  77. [2017-10-27 19:38:51] [Output] : ★ following a star pattern, making sure it's correctly tighten, finish the left front side.
  78. ------------------------------------------------------------------------------------------------------------------
  79. [2017-10-29 01:20:55] [Output] : ★ Lukas Ruiz drags all the tools towards the front right side of the car, along with the toolbox,
  80. [2017-10-29 01:21:04] [Output] : ★ displaying them next to the wheel, on the ground. ((Lukas Ruiz))
  81. [2017-10-29 01:21:38] [Output] : ★ Lukas Ruiz grasps the torque wrench, as he would start to untighten the 5 nuts holding the-
  82. [2017-10-29 01:21:42] [Output] : ★ wheel in place. ((Lukas Ruiz))
  83. [2017-10-29 01:22:06] [Output] : ★ 1 by 1, he would remove the nuts and store them on the floor, also where he would- ((Lukas Ruiz))
  84. [2017-10-29 01:22:14] [Output] : ★ keep the wheel leaning onto the passenger door. ((Lukas Ruiz))
  85. [2017-10-29 01:22:39] [Output] : ★ Lukas Ruiz slides the torque behind the caliper, as he would start to untighten the two nuts-
  86. [2017-10-29 01:22:47] [Output] : ★ holding it onto the disk. ((Lukas Ruiz))
  87. [2017-10-29 01:23:02] [Output] : ★ Lukas Ruiz pulls it off, aswell as the pads, storing them on the workbench behind him.
  88. [2017-10-29 01:23:25] [Output] : ★ Lukas Ruiz then kindly unconnects the brake lines, pulling the disk off, trying not to scratch it-
  89. [2017-10-29 01:23:36] [Output] : ★ or put dirt on the braking surface. ((Lukas Ruiz))
  90. [2017-10-29 01:23:57] [Output] : ★ then grasps back the torque wrench, as he would slide it on the hub, twisting it- ((Lukas Ruiz))
  91. [2017-10-29 01:24:16] [Output] : ★ counter clockwise, untightening the central nut, and loosening the hub; stores it on- ((Lukas Ruiz))
  92. [2017-10-29 01:24:24] [Output] : ★ the workbench aswell. ((Lukas Ruiz))
  93. [2017-10-29 01:24:58] [Output] : ★ As the hub would be off the knuckle, Lukas would slide the torque under the coilover, ((Lukas Ruiz))
  94. [2017-10-29 01:25:09] [Output] : ★ untightening the lower mount holding it onto the lower control arm. ((Lukas Ruiz))
  95. [2017-10-29 01:25:43] [Output] : ★ Lukas Ruiz then reaches for the hood, grasping a ratchet with a 13mm end, untigthening the 3-
  96. [2017-10-29 01:25:55] [Output] : ★ top mounts with his right hand, as he would be holding the coilover with his left one. ((Lukas Ruiz))
  97. [2017-10-29 01:26:16] [Output] : ★ Lukas Ruiz pulls the coilover out, storing it away, safely.
  98. [2017-10-29 01:27:01] [Output] : ★ Lukas Ruiz then proceeds to grasp the tie rod removal tool, as he would mount it onto the outer-
  99. [2017-10-29 01:27:03] [Output] : ★ one ((Lukas Ruiz))
  100. [2017-10-29 01:27:20] [Output] : ★ Lukas Ruiz twists it counter-clockwise, loosening it; pulls it off afterwards.
  101. [2017-10-29 01:27:50] [Output] : ★ Lukas Ruiz then grasps a wrench, untightening the two screws holding the upper control arm-
  102. [2017-10-29 01:28:11] [Output] : ★ onto the sub-frame, as the knuckle, upper and lower control arms would be left- ((Lukas Ruiz))
  103. [2017-10-29 01:28:34] [Output] : ★ hanging by the screws supporting the lower control arm to the frame. ((Lukas Ruiz))
  104. [2017-10-29 01:28:58] [Output] : ★ Lukas Ruiz pulls this duo of screws out, with the help of his wrench, keeping this trio away from-
  105. [2017-10-29 01:29:11] [Output] : ★ the car, onto a pile of old parts he had previously started. ((Lukas Ruiz))
  106. [2017-10-29 01:29:34] [Output] : ★ As the car would be left with pretty much no steering system on the right side, Lukas would ((Lukas Ruiz))
  107. [2017-10-29 01:29:52] [Output] : ★ Lukas Ruiz turn himself over to the workbench, starting to rip the cardboard box open, with an-
  108. [2017-10-29 01:29:57] [Output] : ★ utility knife on the toolbox. ((Lukas Ruiz))
  109. [2017-10-29 01:30:20] [Output] : ★ As he would cut it open, the Wisefab kit would be revealed. ((Lukas Ruiz))
  110. [2017-10-29 01:30:35] [Output] : ★ Lukas Ruiz grasps the knuckle from the inside, as he would lay it on the workbench,
  111. [2017-10-29 01:30:44] [Output] : ★ upon stacking the hub ontop of it. ((Lukas Ruiz))
  112. [2017-10-29 01:31:00] [Output] : ★ Lukas Ruiz tightens these two together with a nut, as he would store them away.
  113. [2017-10-29 01:31:56] [Output] : ★ Lukas Ruiz then takes ahold of the new control arms, dragging them over towards the car.
  114. [2017-10-29 01:32:19] [Output] : ★ Lukas Ruiz slides the lower one in place, as he would secure it with a couple of screws onto-
  115. [2017-10-29 01:32:24] [Output] : ★ the sub-frame. ((Lukas Ruiz))
  116. [2017-10-29 01:33:01] [Output] : ★ Lukas Ruiz then proceeds to do the same with the upper control arm, as he would clean a stack-
  117. [2017-10-29 01:33:44] [Output] : ★ of dirt standing in the way of the control arm's screw holes. ((Lukas Ruiz))
  118. [2017-10-29 01:34:03] [Output] : ★ Lukas Ruiz then slides this one in place, upon tightening it up against the sub-frame with the help-
  119. [2017-10-29 01:34:09] [Output] : ★ of a duo of screws and a wrench. ((Lukas Ruiz))
  120. [2017-10-29 01:35:29] [Output] : ★ Lukas Ruiz then grasps the used outer tie rod, sliding this one in place, as he would give it a few-
  121. [2017-10-29 01:35:57] [Output] : ★ twists with the special tool, clockwise, ligning it up, with the screw on the end facing- ((Lukas Ruiz))
  122. [2017-10-29 01:36:01] [Output] : ★ downwards. ((Lukas Ruiz))
  123. [2017-10-29 01:36:29] [Output] : ★ Lukas Ruiz then stands back up, taking ahold of the coilover on the table, wrapping it around his hands
  124. [2017-10-29 01:36:52] [Output] : ★ Lukas Ruiz slides the top mounts in, on the engine bay, just kindly tightening these 3 ones with his-
  125. [2017-10-29 01:36:54] [Output] : ★ hand. ((Lukas Ruiz))
  126. [2017-10-29 01:37:19] [Output] : ★ Lukas Ruiz then ligns up the lower mount with the lower control arm, fixing this one completly, with-
  127. [2017-10-29 01:37:21] [Output] : ★ the wrench. ((Lukas Ruiz))
  128. [2017-10-29 01:37:51] [Output] : ★ Lukas Ruiz gives the wrench a few clockwise twirls on the top mount's screws, fully securing the-
  129. [2017-10-29 01:37:53] [Output] : ★ coilover. ((Lukas Ruiz))
  130. [2017-10-29 01:38:29] [Output] : ★ As the coilover would be mounted, he would mount the outer tie rod onto it, ((Lukas Ruiz))
  131. [2017-10-29 01:38:42] [Output] : ★ tightening it with a small nut. ((Lukas Ruiz))
  132. [2017-10-29 01:39:02] [Output] : ★ Lukas Ruiz then grasps back the big blue wisefab knuckle from the table, sliding it in place,
  133. [2017-10-29 01:39:08] [Output] : ★ between the control arms. ((Lukas Ruiz))
  134. [2017-10-29 01:39:28] [Output] : ★ Lukas Ruiz slides the screws in place, both top and bottom of the knuckle, as he would secure-
  135. [2017-10-29 01:39:36] [Output] : ★ these ones with a nut and a wrench. ((Lukas Ruiz))
  136. [2017-10-29 01:40:08] [Output] : ★ Lukas Ruiz rotates the wheel hub in place, making it face outwards.
  137. [2017-10-29 01:40:36] [Output] : ★ Lukas Ruiz grasps the brake disk from the workbench, giving it a fast swipe with his shirt,
  138. [2017-10-29 01:40:42] [Output] : ★ upon sliding it into the hub. ((Lukas Ruiz))
  139. [2017-10-29 01:41:01] [Output] : ★ Lukas Ruiz then mounts the caliper onto this one, with the pads inside, quickly securing it with-
  140. [2017-10-29 01:41:09] [Output] : ★ the duo of nuts on the back of it. ((Lukas Ruiz))
  141. [2017-10-29 01:41:31] [Output] : ★ Lukas Ruiz gives it a strong tighten with the torque wrench, upon plugging in the brake fluid lines.
  142. [2017-10-29 01:41:47] [Output] : ★ As he would be done with the brakes, Lukas would grasp back the wheel by the rim, ((Lukas Ruiz))
  143. [2017-10-29 01:41:55] [Output] : ★ sliding it onto the hub. ((Lukas Ruiz))
  144. [2017-10-29 01:42:13] [Output] : ★ Lukas Ruiz pushes the bottom of it inside, so it's moreless aligned, sliding the 5 nuts in place-
  145. [2017-10-29 01:42:18] [Output] : ★ afterwards. ((Lukas Ruiz))
  146. [2017-10-29 01:42:37] [Output] : ★ Lukas Ruiz gives these ones a fast twirl clockwise, just to secure the wheel in place.
  147. [2017-10-29 01:43:30] [Output] : ★ Lukas Ruiz then finishes it off with the torque wrench, following a star pattern for an even-
  148. [2017-10-29 01:43:33] [Output] : ★ clamping. ((Lukas Ruiz))
  149. [2017-10-29 01:43:46] [Output] : ★ Lukas Ruiz reaches for the lifts control panel, lowering the car completely.
  150. [2017-10-29 01:44:12] [Output] : ★ Lukas Ruiz slides himself into the driver's seat, quickly testing the steering for any noises.
  151. [2017-10-29 01:44:32] [Output] : ★ As he would take a positive conclusion, Lukas would drive the car off the ramp, ((Lukas Ruiz))
  152. [2017-10-29 01:44:47] [Output] : ★ doing som mad skids around the garage to test the steering kit. ((Lukas Ruiz))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!