API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 29th, 2019
381
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.73 KB | None | 0 0
raw download clone embed print report
  1. Base: 4.16_02A
  2. CFE version 1.0.38-116.140-S for BCM963381 (32bit,SP,BE) generic
  3. Build Date: Tue Feb 6 12:15:08 CET 2018 (m.delazzari@quelo) v1
  4. Copyright (C) 2000-2013 Broadcom Corporation.
  5.  
  6. Chip ID: BCM63381B0, MIPS: 600MHz, DDR: 400MHz, Bus: 300MHz
  7. Main Thread: TP0
  8. Total Memory: 134217728 bytes (128MB)
  9. Boot Address: 0xb8000000
  10.  
  11. SPI NAND flash device: GigaDevice GD5F1GQ4UB, id 0xc8d1 block 128KB size 131072K B
  12. pmc_init:PMC using DQM mode
  13. Board IP address : 192.168.1.1:ffffff00
  14. Host IP address : 192.168.1.100
  15. Gateway IP address :
  16. Run from flash/host/tftp (f/h/c) : f
  17. Default host run file name : vmlinux
  18. Default host flash file name : bcm963xx_fs_kernel
  19. Boot delay (0-9 seconds) : 1
  20. Boot image (0=latest, 1=previous) : 1
  21. Default host ramdisk file name :
  22. Default ramdisk store address :
  23. Board Id (0-13) : 963381VV3220
  24. Number of MAC Addresses (1-32) : 10
  25. Base MAC Address : 00:10:18:00:00:00
  26. PSI Size (1-64) KBytes : 24
  27. Enable Backup PSI [0|1] : 0
  28. System Log Size (0-256) KBytes : 0
  29. Auxillary File System Size Percent: 0
  30. Main Thread Number [0|1] : 0
  31. WLan Feature : 0x00
  32. Voice Board Configuration (0-2) : LE9642_ZSI_BB
  33.  
  34. *** Press any key to stop auto run (1 seconds) ***
  35. Auto run second count down: 0
  36. Booting from previous image (address 0xb8020000, flash offset 0x00020000) ...
  37. Verifying kernel signature...
  38. Signature OK
  39. Decompression OK!
  40. Entry at 0x802df760
  41. Starting program at 0x802df760
  42. [ 0.000000] Linux version 3.4.11-rt19 (m.delazzari@quelo) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Tue Feb 6 12:41:49 CET 2018
  43. [ 0.000000] 963381VV3220 prom init
  44. [ 0.000000] CPU revision is: 0002a081 (Broadcom BMIPS4350)
  45. [ 0.000000] DSL SDRAM reserved: 0x132000
  46. [ 0.000000] Determined physical RAM map:
  47. [ 0.000000] memory: 07ece000 @ 00000000 (usable)
  48. [ 0.000000] Zone PFN ranges:
  49. [ 0.000000] DMA 0x00000000 -> 0x00001000
  50. [ 0.000000] Normal 0x00001000 -> 0x00007ece
  51. [ 0.000000] Movable zone start PFN for each node
  52. [ 0.000000] Early memory PFN ranges
  53. [ 0.000000] 0: 0x00000000 -> 0x00007ece
  54. [ 0.000000] On node 0 totalpages: 32462
  55. [ 0.000000] free_area_init_node: node 0, pgdat 8039e340, node_mem_map 8100000 0
  56. [ 0.000000] DMA zone: 32 pages used for memmap
  57. [ 0.000000] DMA zone: 0 pages reserved
  58. [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
  59. [ 0.000000] Normal zone: 222 pages used for memmap
  60. [ 0.000000] Normal zone: 28144 pages, LIFO batch:7
  61. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81103000 s5088 r8192 d15392 u32768
  62. [ 0.000000] pcpu-alloc: s5088 r8192 d15392 u32768 alloc=8*4096
  63. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  64. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 32208
  65. [ 0.000000] Kernel command line: root=mtd:rootfs_1 rw rootfstype=jffs2 irqaf finity=0
  66. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  67. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  69. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  70. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  71. [ 0.000000] Memory: 124520k/129848k available (2919k kernel code, 5328k reser ved, 723k data, 196k init, 0k highmem)
  72. [ 0.000000] Preemptible hierarchical RCU implementation.
  73. [ 0.000000] NR_IRQS:128
  74. [ 0.000000] console [ttyS0] enabled
  75. [ 0.000000] Allocating memory for DSP module core and initialization code
  76. [ 0.000000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0
  77. [ 0.004000] Calibrating delay loop... 598.01 BogoMIPS (lpj=299008)
  78. [ 0.014000] pid_max: default: 32768 minimum: 301
  79. [ 0.015000] Mount-cache hash table entries: 512
  80. [ 0.017000] --Kernel Config--
  81. [ 0.018000] SMP=1
  82. [ 0.019000] PREEMPT=1
  83. [ 0.020000] DEBUG_SPINLOCK=0
  84. [ 0.021000] DEBUG_MUTEXES=0
  85. [ 0.022000] Broadcom Logger v0.1 Feb 6 2018 12:38:13
  86. [ 0.033000] CPU revision is: 0002a081 (Broadcom BMIPS4350)
  87. [ 0.033000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  88. [ 0.033000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  89. [ 0.043000] Brought up 2 CPUs
  90. [ 0.047000] devtmpfs: initialized
  91. [ 0.057000] NET: Registered protocol family 16
  92. [ 0.066000] pmc_init:PMC using DQM mode
  93. [ 0.101000] registering PCI controller with io_map_base unset
  94. [ 0.123000] bcm63xx_pcie: setting resistor calibration value to 0x0
  95. [ 0.128000] bcm63xx_pcie: applying serdes parameters
  96. [ 0.384000] registering PCI controller with io_map_base unset
  97. [ 0.424000] bio: create slab <bio-0> at 0
  98. [ 0.432000] usbcore: registered new interface driver usbfs
  99. [ 0.437000] usbcore: registered new interface driver hub
  100. [ 0.439000] usbcore: registered new device driver usb
  101. [ 0.441000] bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
  102. [ 0.443000] PCI host bridge to bus 0000:00
  103. [ 0.444000] pci_bus 0000:00: root bus resource [mem 0x10600000-0x106fffff]
  104. [ 0.445000] pci_bus 0000:00: root bus resource [io 0x11700000-0x1170ffff]
  105. [ 0.446000] pci 0000:00:09.0: [14e4:6300] type 00 class 0x0c0310
  106. [ 0.447000] pci 0000:00:09.0: reg 10: [mem 0x1000c400-0x1000c4ff]
  107. [ 0.448000] pci 0000:00:0a.0: [14e4:6300] type 00 class 0x0c0320
  108. [ 0.449000] pci 0000:00:0a.0: reg 10: [mem 0x1000c300-0x1000c3ff]
  109. [ 0.452000] PCI host bridge to bus 0000:01
  110. [ 0.453000] pci_bus 0000:01: root bus resource [mem 0xa0000000-0xbfffffff]
  111. [ 0.454000] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
  112. [ 0.455000] pci 0000:01:00.0: [14e4:6338] type 01 class 0x060400
  113. [ 0.456000] pci 0000:01:00.0: PME# supported from D0 D3hot
  114. [ 0.457000] pci 0000:02:00.0: [14e4:a8db] type 00 class 0x028000
  115. [ 0.458000] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
  116. [ 0.459000] pci 0000:02:00.0: supports D1 D2
  117. [ 0.464000] pci 0000:01:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
  118. [ 0.465000] pci 0000:02:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bi t]
  119. [ 0.466000] pci 0000:01:00.0: PCI bridge to [bus 02-02]
  120. [ 0.467000] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xa00fffff]
  121. [ 0.468000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  122. [ 0.473000] skbFreeTask created successfully
  123. [ 0.474000] Broadcom IQoS v0.1 Feb 6 2018 12:40:26 initialized
  124. [ 0.475000] Broadcom GBPM v0.1 Feb 6 2018 12:40:27 initialized
  125. [ 0.476000] NET: Registered protocol family 8
  126. [ 0.477000] NET: Registered protocol family 20
  127. [ 0.478000] Switching to clocksource MIPS
  128. [ 0.494000] NET: Registered protocol family 2
  129. [ 0.499000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  130. [ 0.508000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  131. [ 0.515000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  132. [ 0.522000] TCP: Hash tables configured (established 4096 bind 4096)
  133. [ 0.528000] TCP: reno registered
  134. [ 0.531000] UDP hash table entries: 128 (order: 0, 4096 bytes)
  135. [ 0.537000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  136. [ 0.545000] NET: Registered protocol family 1
  137. [ 0.549000] PCI: CLS 16 bytes, default 16
  138. [ 0.553000] init_bcm_tstamp: unhandled mips_hpt_freq=300000000, adjust consta nts in bcm_tstamp.c
  139. [ 0.562000] bcm_tstamp initialized, (hpt_freq=300000000 2us_div=300 2ns_mult= 0 2ns_shift=0)
  140. [ 0.578000] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (c) 200 1-2006 Red Hat, Inc.
  141. [ 0.588000] msgmni has been set to 243
  142. [ 0.612000] io scheduler noop registered (default)
  143. [ 0.667000] brd: module loaded
  144. [ 0.682000] loop: module loaded
  145. [ 0.689000] SPI NAND Device Linux Registration
  146. [ 0.696000] SPI NAND Linux Registration
  147. [ 0.699000] SPI NAND device reset
  148. [ 0.708000] Found SPI NAND device GigaDevice GD5F1GQ4UB
  149. [ 0.718000] SPI NAND device GigaDevice GD5F1GQ4UB
  150. [ 0.722000] device id = 0xc8d1
  151. [ 0.726000] page size = 0x800 (2048) bytes
  152. [ 0.731000] block size = 0x20000 (131072) bytes
  153. [ 0.736000] total blocks = 0x400 (1024)
  154. [ 0.740000] total size = 0x8000000 (134217728) bytes
  155. [ 0.745000] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (Gigadevice NAN D 128MiB 3,3V 8-bit)
  156. [ 0.755000] NAND_ECC_NONE selected by board driver. This is not recommended!
  157. [ 0.977000] Creating 8 MTD partitions on "GigaDevice GD5F1GQ4UB":
  158. [ 0.983000] 0x000000000000-0x000000020000 : "CFE"
  159. [ 0.995000] 0x000000020000-0x000000220000 : "bootfs_1"
  160. [ 1.008000] 0x000000220000-0x000001ee0000 : "rootfs_1"
  161. [ 1.042000] 0x000003f00000-0x000007dc0000 : "upgrade"
  162. [ 1.104000] 0x000007dc0000-0x000007ec0000 : "conf_fs"
  163. [ 1.117000] 0x000007ec0000-0x000007f00000 : "conf_factory"
  164. [ 1.129000] 0x000007f00000-0x000008000000 : "bbt"
  165. [ 1.134000] Bad Block 0x3ff found (address 0x7fe0000)
  166. [ 1.146000] 0x000000000000-0x000008000000 : "flash"
  167. [ 1.253000] Bad Block 0x3ff found (address 0x7fe0000)
  168. [ 1.265000] mtd_init:307 force g_nand_nop=0
  169. [ 1.269000] PPP generic driver version 2.4.2
  170. [ 1.275000] PPP BSD Compression module registered
  171. [ 1.279000] PPP Deflate Compression module registered
  172. [ 1.285000] NET: Registered protocol family 24
  173. [ 1.289000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [ 1.296000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
  175. [ 1.302000] ehci_hcd 0000:00:0a.0: setting latency timer to 64
  176. [ 1.308000] ehci_hcd 0000:00:0a.0: EHCI Host Controller
  177. [ 1.314000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus numbe r 1
  178. [ 1.321000] ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM
  179. [ 1.348000] ehci_hcd 0000:00:0a.0: irq 113, io mem 0x1000c300
  180. [ 1.360000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00
  181. [ 1.369000] hub 1-0:1.0: USB hub found
  182. [ 1.372000] hub 1-0:1.0: 1 port detected
  183. [ 1.378000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  184. [ 1.384000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
  185. [ 1.390000] ohci_hcd 0000:00:09.0: setting latency timer to 64
  186. [ 1.396000] ohci_hcd 0000:00:09.0: OHCI Host Controller
  187. [ 1.401000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus numbe r 2
  188. [ 1.409000] ohci_hcd 0000:00:09.0: irq 112, io mem 0x1000c400
  189. [ 1.474000] hub 2-0:1.0: USB hub found
  190. [ 1.478000] hub 2-0:1.0: 1 port detected
  191. [ 1.484000] brcmboard: brcm_board_init entry
  192. [ 1.488000] SES: Button Interrupt 0x1 is enabled
  193. [ 1.492000] WIFI: Button Interrupt 0x4 is enabled
  194. [ 1.497000] DYING GASP IRQ initialized
  195. [ 1.501000] bcm963xx-flash.0: failed to claim resource 0
  196. [ 1.507000] Serial: BCM63XX driver $Revision: 3.00 $
  197. [ 1.512000] Magic SysRq with Auxilliary trigger char enabled (type ^ h for li st of supported commands)
  198. [ 1.522000] ttyS0 at MMIO 0xb0000280 (irq = 8) is a BCM63XX
  199. [ 1.529000] ttyS1 at MMIO 0xb00002a0 (irq = 9) is a BCM63XX
  200. [ 1.536000] Total # RxBds=2904
  201. [ 1.538000] bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
  202. [ 1.538000]
  203. [ 1.546000] bcmxtmrt: Broadcom BCM3381B0 ATM/PTM Network Device v0.6 Feb 6 2 018 12:39:46
  204. [ 1.558000] TCP: cubic registered
  205. [ 1.561000] Initializing XFRM netlink socket
  206. [ 1.565000] NET: Registered protocol family 17
  207. [ 1.570000] NET: Registered protocol family 15
  208. [ 1.574000] 8021q: 802.1Q VLAN Support v1.8
  209. [ 1.687000] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  210. [ 1.821000] hub 1-1:1.0: USB hub found
  211. [ 1.825000] hub 1-1:1.0: 4 ports detected
  212. [ 2.479000] VFS: Mounted root (jffs2 filesystem) on device 31:2.
  213. [ 2.487000] Freeing unused kernel memory: 196k freed
  214. init started: BusyBox v1.17.3 (2018-02-06 12:35:09 CET)
  215. init: setting virtual memory limit 8388608 -1
  216.  
  217. starting pid 242, tty '': '/etc/init.d/rcS S boot'
  218. Starting boot.sh ...
  219. Restore passwd ....
  220. Restore group ....
  221. mount virtual fs...
  222. starting pid 262, tty '/dev/ttyS0': '/bin/login'
  223.  
  224. Please press Enter to activate this console. [ 5.504000] udevd (269): /proc/2 69/oom_adj is deprecated, please use /proc/269/oom_score_adj instead.
  225. Tue Feb 6 11:22:25 UTC 2018
  226. Starting /etc/rc.d/S11services.sh ...
  227. starting pid 275, tty '/dev/null': 'logd'
  228. reporting service status with 'cmclient SET -u boot Device.X_ADB_SystemLog.[Ena ble=true].Enable true'
  229.  
  230.  
  231. -- Base System Init [6.33]
  232.  
  233. [*] Starting Event Controller
  234. [*] Loading Drivers and Kernel Modules
  235. starting pid 290, tty '/dev/null': 'ec'
  236. [*] Starting Configuration Load
  237. [ 9.311000] Bridge firewalling registered
  238. [ 9.620000] ip_tables: (C) 2000-2006 Netfilter Core Team
  239. [ 10.746000] bcm_bpm: module license 'unspecified' taints kernel.
  240. [ 10.754000] Disabling lock debugging due to kernel taint
  241. [ 10.773000] BPM: tot_mem_size=134217728B (128MB), buf_mem_size <10%> =1342177 0B (12MB), num of buffers=5178, buf size=2592
  242. [ 10.784000] Broadcom BPM Module Char Driver v0.1 Feb 6 2018 12:13:17 Registe red<244>
  243. [*] Starting Configuration Manager (B)
  244. [ 11.390000] nf_conntrack version 0.5.0 (1948 buckets, 7792 max)
  245. [ 12.322000] bcmxtmcfg: bcmxtmcfg_init entry
  246. [ 13.219000] Broadcom BCM63381B0 Ethernet Network Device v0.1 Feb 6 2018 12:2 2:27
  247. [ 13.236000] ETH Init: Ch:0 - 200 tx BDs at 0xa70d1000
  248. [ 13.243000] ETH Init: Ch:0 - 2071 rx BDs at 0xa60f8000
  249. [ 13.310000] enet: allocating 3107 skbs
  250. [ 13.383000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
  251. [ 13.492000] eth0: <Int sw port: 0> <Logical : 00> PHY_ID <0x00000001 : 0x01> MAC : 00:10:18:00:00:00
  252. [ 13.561000] eth1: <Int sw port: 1> <Logical : 01> PHY_ID <0x00000002 : 0x02> MAC : 00:10:18:00:00:00
  253. [ 13.671000] eth2: <Int sw port: 2> <Logical : 02> PHY_ID <0x00000003 : 0x03> MAC : 00:10:18:00:00:00
  254. [ 13.752000] eth3: <Int sw port: 3> <Logical : 03> PHY_ID <0x00000004 : 0x04> MAC : 00:10:18:00:00:00
  255. [ 13.846000] eth4: <Int sw port: 4> <Logical : 04> PHY_ID <0x02980018 : 0x18> MAC : 00:10:18:00:00:00
  256. [ 13.968000] Ethernet Auto Power Down and Sleep: Enabled
  257. [ 13.999000] Energy Efficient Ethernet: Enabled
  258. - CM TR-181 ready
  259. - CM TR-98 ready
  260. [Configuration Load ready]
  261. [*] Starting System Log
  262. [ 23.850000] --SMP support
  263. [ 23.854000] wl: dsl_tx_pkt_flush_len=338
  264. [ 23.858000] wl: norm_wmark_tot=1478, pktc_wmark_tot=1478 bk_wm=369 be_wm=739 vi_wm=1108 vo_wm=1478
  265. [ 23.878000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
  266. [ 23.885000] wl: passivemode=1
  267. [ 23.891000] wl0: creating kthread wl0-kthrd
  268. [ 23.960000] wl: napimode=0
  269. [ 23.983000] initvars_cis_pci: Not CIS format
  270. [ 23.989000] Neither SPROM nor OTP has valid image
  271. [ 23.993000] wl:srom/otp not programmed, using main memory mapped srom info(wo mbo board)
  272. [ 24.008000] wl: ID=pci/2/0/
  273. [ 24.012000] wl: ID=pci/2/0/
  274. [ 24.022000] wl: loading /etc/wlan/bcm43217_map.bin
  275. [ 24.028000] srom rev:8
  276. [ 24.041000] wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
  277. [ 24.103000] wl0: pqc 16 - size tot 1368
  278. [ 24.108000] * pkt queue base: 128
  279. [ 24.108000] * data HI watermark: 50
  280. [ 24.108000] * PS queue: 1140
  281. [ 24.121000] wl0: allocskbmode=1 currallocskbsz=1024
  282. [ 24.167000] wl0: Broadcom BCM43227 802.11 Wireless Controller 7.14.89.3303.cp e4.16L02A.0-kdb
  283. [ 24.178000] dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
  284. [ 25.558000] NET: Registered protocol family 10
  285. [ 25.588000] ADDRCONF(NETDEV_UP): bcmsw: link is not ready
  286. [ 26.293000] SCSI subsystem initialized
  287. [ 27.831000] IPv6 over IPv4 tunneling driver
  288. [ 28.277000] zram: num_devices not specified. Using default: 1
  289. [ 28.284000] zram: Creating 1 devices ...
  290. [ 29.565000] Loading independent TCP/IPv6 endpoint filter target
  291. [System Log ready]
  292. [*] Starting LEDs (B)
  293. [ 32.773000] xt_time: kernel timezone is -0000
  294. [*] Probing for usb devices...
  295. [*] Cleaning dynamic entries...
  296. [*] Epicentro Software Version: 5.3.2.0019
  297. [*] Epicentro Platform Version: 5.3.2.0019
  298. [LEDs (B) ready]
  299. [ 37.540000] Ebtables v2.0 registered
  300. [ 40.958000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  301. [ 41.458000] wl_add_if 84445c00:wl0.1 bits 0
  302. [*] Starting PowerManagement
  303. [ 42.157000] wl_add_if 844aa600:wl0.2 bits 0
  304. [ 42.415000] Host MIPS Clock divider pwrsaving is enabled
  305. [PowerManagement ready]
  306. [ 42.977000] wl_add_if 84431a00:wl0.3 bits 0
  307. [*] Starting Swap Disk (RAM)
  308. [Swap Disk (RAM) ready]
  309. [*] Starting Yatta Transport Fast Forwarding
  310. [ 43.816000] Adding 3068k swap on /dev/zram0. Priority:-1 extents:1 across:30 68k SS
  311. [ 43.930000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  312. [ 43.952000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  313. [Yatta Transport Fast Forwarding ready]
  314. [ 44.600000] Loading modules backported from Linux version v4.2-rc1-0-gd770e55
  315. [ 44.608000] Backport generated by backports.git v4.2-rc1-1-0-g83a2518
  316. [ 45.024000] usbcore: registered new interface driver cdc_wdm
  317. [ 45.213000] usbcore: registered new interface driver usblp
  318. [ 45.645000] usbcore: registered new interface driver usbserial
  319. [ 45.669000] usbcore: registered new interface driver usbserial_generic
  320. [ 45.695000] USB Serial support registered for generic
  321. [ 45.700000] usbserial: USB Serial Driver core
  322. [ 45.823000] usbcore: registered new interface driver cdc_ether
  323. [ 46.041000] usbcore: registered new interface driver cdc_ncm
  324. [ 46.198000] usbcore: registered new interface driver qmi_wwan
  325. [ 46.365000] usbcore: registered new interface driver cdc_mbim
  326. [ 46.502000] usbcore: registered new interface driver huawei_cdc_ncm
  327. [ 48.055000] adsl: adsl_init entry
  328. - Init DSL Line
  329. [ 48.334000] bcmxtmcfg: DS xDSL G.inp Mode = DISABLED
  330. [ 48.339000] XTM Init: Ch:0 - 517 rx BDs at 0xa44ee000
  331. [ 48.345000] XTM Init: Ch:1 - 16 rx BDs at 0xa4cf8480
  332. [ 48.354000] bcmxtmrt: PTM/ATM Non-Bonding Mode configured in system
  333. [ 48.360000] bcmxtmcfg: Out of sequence call to XTM_ASM_HANDLER::Uninitialize( ). Recovering.
  334. [ 48.369000] bcmxtmcfg: ATM Bonding configured in system. Fallback mode = Enab led
  335. [ 48.377000] bcmxtmcfg: Bonding State is DATA_IDLE
  336. [ 48.382000] bcmxtmcfg: SID MODE SET to 12 BIT MODE
  337. [ 48.387000] bcmxtmcfg: ATM Bonding Mgmt Log Area = 87a31504
  338. [ 48.835000] *** dslThread dslPid=1312
  339. [ 48.839000] BcmAdsl_Initialize=0xC323108C, g_pFnNotifyCallback=0xC32659C4
  340. [ 50.247000] ***BcmDiagsMgrRegisterClient: 0 ***
  341. [ 50.251000] dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
  342. [*] InterfaceMonitor Init
  343. [*] Starting Firewall
  344. [*] WAN Ethernet Interfaces - Power UP! (B)
  345. [eth4] up
  346. [Firewall ready]
  347. [*] Starting NAT
  348. [*] Starting Port Mapping
  349. [Port Mapping ready]
  350. [NAT ready]
  351. [*] Starting QoS
  352. [QoS ready]
  353. [ 55.277000] Initializing USB Mass Storage driver...
  354. [ 55.292000] usbcore: registered new interface driver usb-storage
  355. [ 55.299000] USB Mass Storage support registered.
  356.  
  357.  
  358. -- Prepare Networking [55.30]
  359.  
  360. - Init USB Interfaces
  361. - Init Bridges (0)
  362. [ 56.278000] device eth0 entered promiscuous mode
  363. [ 56.360000] device eth1 entered promiscuous mode
  364. [ 56.432000] device eth2 entered promiscuous mode
  365. [ 56.502000] device eth3 entered promiscuous mode
  366. [ 56.573000] device wl0 entered promiscuous mode
  367. [ 56.615000] device wl0.1 entered promiscuous mode
  368. [ 56.664000] device wl0.2 entered promiscuous mode
  369. [ 56.706000] device wl0.3 entered promiscuous mode
  370. ==[br0]== 802.1D-2004 -(eth0)--(eth1)--(eth2)--(eth3)--(wl0)--(wl0.1)--(wl0.2)- -(wl0.3)-
  371. [ 60.769000] device br0 entered promiscuous mode
  372. [ 61.423000] ADDRCONF(NETDEV_UP): br0: link is not ready
  373.  
  374.  
  375. -- Start Networking [61.89]
  376.  
  377. starting pid 1677, tty '/dev/null': 'dns'
  378. [*] Starting DNS client
  379. [DNS client ready]
  380. [*] Starting DHCP server
  381. [*] LAN Ethernet Interfaces - Power UP! (B)
  382. [eth0] up
  383. [eth1] up
  384. [eth2] up
  385. [eth3] up
  386. [*] Starting Filtering
  387. [Filtering ready]
  388. [*] Starting TR-069 agent (B)
  389. starting pid 1776, tty '/dev/null': 'cwmp'
  390. starting pid 1820, tty '/dev/null': 'dhcps /tmp/dhcps.conf'
  391. [TR-069 agent (B) ready]
  392. [*] Starting Public Pool
  393. [Public Pool ready]
  394. [*] Starting IPv6 services
  395. - DHCPv6 init
  396. [DHCP server ready]
  397. [ 65.419000] eth1 Link UP 100 mbps full duplex
  398.  
  399.  
  400. -- Start Network Services [65.54]
  401.  
  402. starting pid 1852, tty '/dev/null': 'inetd -f'
  403. [*] Starting DNS forwarder
  404. [DNS forwarder ready]
  405. [*] Starting IGMP proxy
  406. [ 67.789000] 8021q: adding VLAN 0 to HW filter on device eth1
  407. [ 67.802000] br0: port 2(eth1) entered forwarding state
  408. [ 67.807000] br0: port 2(eth1) entered forwarding state
  409. [ 67.821000] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
  410. starting pid 1993, tty '/dev/null': 'yamp -c /tmp/yamp.conf -p /tmp/yamp.pid'
  411. [IGMP proxy ready]
  412. [*] Starting License Manager
  413. [License Manager ready]
  414. [*] Starting WPS/WLAN button service (B)
  415. [*] Startup Software Execution Environments
  416. [*] Starting WiFi Radio (B)
  417. starting pid 2071, tty '/dev/null': 'httpd -u nobody'
  418. [ 72.150000] br0: port 5(wl0) entered forwarding state
  419. [ 72.154000] br0: port 5(wl0) entered forwarding state
  420. starting pid 2185, tty '/dev/null': 'hostapd -B /tmp/wlan/config/hostapd.conf.wl 0 -P /var/run/hostapd_wl0.pid'
  421. [ 74.655000] br0: port 5(wl0) entered disabled state
  422. [WiFi Radio ready[ 75.592000] br0: port 5(wl0) entered forwarding state
  423. [ 75.598000] br0: port 5(wl0) entered forwarding state
  424. ]
  425. [*] Starting VOIP services (B)
  426. - Init Iperf Service
  427.  
  428.  
  429. -- System Ready [76.59]
  430.  
  431. Starting /etc/rc.d/S20voip.sh ...
  432. [ 77.360000] Loading PCM shim driver
  433. [ 79.375000] Endpoint: endpoint_init entry
  434. [ 79.381000] Endpoint: endpoint_init COMPLETED
  435. Starting /etc/rc.d/S60dbus ...
  436. Starting /etc/rc.d/S60ipsec.sh ...
  437. Starting /etc/rc.d/S70vpn.sh ...
  438. Starting /etc/rc.d/S95done ...
  439. [ 82.610000] dropMcastPkt = 0
  440. starting pid 2438, tty '/dev/null': 'voip >/dev/console'
  441. 1517916233:483810 : 2438 : AEP ENDPT - Open Broadcom Endopoint Driver
  442. [ 94.480000] BOS: Enter bosInit
  443. [ 94.483000] BOS: Exit bosInit
  444. [ 94.534000] ******* DSP: Found BCM63381 *******
  445. [ 94.538000] ******* DSP: In PCM Mode *******
  446. [ 94.543000] ******* DSP: PCM running in 16 bit mode *******
  447. [ 94.549000] gInterruptCounter = 0xC16534E4
  448. [ 94.553000] gInterruptErrors = 0xC16534E0
  449. [ 94.558000] gNextRxDesc = 0xC1653618
  450. [ 94.562000] gNextTxDesc = 0xC165361C
  451. [ 94.567000] 32 ms ECAN tail-length
  452. [ 94.570000] *** gStartRxDesc[0] = 0xA70C2000
  453. [ 94.575000] *** gBufferSizeBytes = 640
  454. [ 94.579000] *** gStartTxDesc[0] = 0xA70C27D0
  455. [ 94.583000] halPcmInit 367 nextTxDesc = 0xA70C27D0
  456. [ 94.588000] halPcmInit 367 nextTxDesc = 0xA70C27D8
  457. [ 94.594000] halPcmInit 371 Ownership for TX desc not set. Use this buffer.
  458. [ 94.601000] Binding 0x8790b680
  459. [ 96.700000] boardHalInit completed
  460. [ 96.712000] DSP: Interrupt Ids
  461. [ 96.715000] ---------------
  462. [ 96.718000] InterruptId/Location = 20/HIGH
  463. [ 96.723000]
  464. [ 96.723000] DSP: Interrupt Masks
  465. [ 96.729000] ---------------
  466. [ 96.731000] IrqMask = 0x00000003
  467. [ 96.736000] IrqMaskLow = 0x00026300
  468. [ 96.741000] IrqMask1 = 0x00100000
  469. [ 96.747000] IrqMaskLow1 = 0x00000000
  470. [ 96.751000]
  471. [ 96.751000] DSP: Interrupt Status
  472. [ 96.757000] -----------------
  473. [ 96.759000] IrqStatus = 0x00000000
  474. [ 96.765000] IrqStatusLow = 0x00000000
  475. [ 96.770000] IrqStatus1 = 0x00000000
  476. [ 96.775000] IrqStatusLow1 = 0x00000000
  477. [ 97.062000] EndpointInit completed
  478. [ 97.065000] dgasp: kerSysRegisterDyingGaspHandler: endpoint registered
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!