SHARE
TWEET

osmo-trx trace

a guest Jan 3rd, 2018 147 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ---------osmo-trx trace-----------------------------------------------------------------------------------
  2. [INFO] [MULTI_USRP] Setting master clock rate selection to 'manual'.
  3. -- Setting B200/B210 EDGE mode (4 SPS TX/RX) (offset 0.0618462 ms = 16.75 samples)
  4. ERR 140699087988544 19:41:56.3 UHDDevice.cpp:871:open: TS_OFFSET = 67 rx_rate = 1.08333e+06
  5. ERR 140699087988544 19:41:56.3 UHDDevice.cpp:871:open: TS_OFFSET = 67 rx_rate = 1.08333e+06
  6. INFO 140699087988544 19:41:56.3 UHDDevice.cpp:445:init_gains: Supported Tx gain range [0; 89.8]
  7. INFO 140699087988544 19:41:56.3 UHDDevice.cpp:450:init_gains: Supported Rx gain range [0; 76]
  8. INFO 140699087988544 19:41:56.3 UHDDevice.cpp:454:init_gains: Default setting Tx gain for channel 0 to 44.9
  9. INFO 140699087988544 19:41:56.4 UHDDevice.cpp:461:init_gains: Default setting Rx gain for channel 0 to 38
  10. INFO 140699087988544 19:41:56.4 UHDDevice.cpp:878:open:
  11. Single USRP:
  12.   Device: B-Series Device
  13.   Mboard 0: B210
  14.   RX Channel: 0
  15.     RX DSP: 0
  16.     RX Dboard: A
  17.     RX Subdev: FE-RX1
  18.   RX Channel: 1
  19.     RX DSP: 1
  20.     RX Dboard: A
  21.     RX Subdev: FE-RX2
  22.   TX Channel: 0
  23.     TX DSP: 0
  24.     TX Dboard: A
  25.     TX Subdev: FE-TX1
  26.   TX Channel: 1
  27.     TX DSP: 1
  28.     TX Dboard: A
  29.     TX Subdev: FE-TX2
  30. ALERT 140699087988544 19:41:57.4 UHDDevice.cpp:937:flush_recv: Device timed out
  31. ALERT 140699087988544 19:41:57.4 UHDDevice.cpp:937:flush_recv: Device timed out
  32. -- Transceiver active with 1 channel(s)
  33. INFO 140699088361216 19:42:23.0 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  34. INFO 140699088361216 19:42:23.0 Transceiver.cpp:732:driveControl: command is CMD POWEROFF
  35. INFO 140699088361216 19:42:23.1 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  36. INFO 140699088361216 19:42:23.1 Transceiver.cpp:732:driveControl: command is CMD POWEROFF
  37. INFO 140699088361216 19:42:23.4 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  38. INFO 140699088361216 19:42:23.4 Transceiver.cpp:732:driveControl: command is CMD RXTUNE 880200
  39. [INFO] SetFrequency using cache values vco:2, csw:141
  40. INFO 140699088361216 19:42:23.4 UHDDevice.cpp:1301:set_freq:
  41. Tune Result:
  42.     Target RF  Freq: 880.200000 (MHz)
  43.     Actual RF  Freq: 880.200000 (MHz)
  44.     Target DSP Freq: 0.000000 (MHz)
  45.     Actual DSP Freq: 0.000000 (MHz)
  46.  
  47. INFO 140699088361216 19:42:23.4 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  48. INFO 140699088361216 19:42:23.4 Transceiver.cpp:732:driveControl: command is CMD TXTUNE 925200
  49. [INFO] SetFrequency using cache values vco:2, csw:202
  50. INFO 140699088361216 19:42:23.4 UHDDevice.cpp:1301:set_freq:
  51. Tune Result:
  52.     Target RF  Freq: 925.200000 (MHz)
  53.     Actual RF  Freq: 925.200000 (MHz)
  54.     Target DSP Freq: -0.000000 (MHz)
  55.     Actual DSP Freq: 0.000000 (MHz)
  56.  
  57. INFO 140699088361216 19:42:23.4 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  58. INFO 140699088361216 19:42:23.4 Transceiver.cpp:732:driveControl: command is CMD SETTSC 7
  59. INFO 140699088361216 19:42:23.4 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  60. INFO 140699088361216 19:42:23.4 Transceiver.cpp:732:driveControl: command is CMD POWERON
  61. NOTICE 140699088361216 19:42:23.4 Transceiver.cpp:254:start: Starting the transceiver
  62. INFO 140699088361216 19:42:23.4 radioInterface.cpp:182:start: Starting radio device
  63. INFO 140699088361216 19:42:23.4 UHDDevice.cpp:972:start: Starting USRP...
  64. INFO 140699088361216 19:42:23.4 UHDDevice.cpp:947:flush_recv: Initial timestamp 22440
  65. INFO 140699088361216 19:42:23.4 UHDDevice.cpp:992:start: The current time is 0.0216554 seconds
  66. INFO 140699088361216 19:42:23.4 radioInterface.cpp:201:start: Radio started
  67. INFO 140699088361216 19:42:23.4 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  68. INFO 140699088361216 19:42:23.4 Transceiver.cpp:1040:writeClockInterface: ClockInterface: sending IND CLOCK 2513128
  69. INFO 140699088361216 19:42:23.4 Transceiver.cpp:732:driveControl: command is CMD SETPOWER 0
  70. ERR 140699088295680 19:42:23.5 UHDDevice.cpp:1027:check_rx_md_err: No packet received, implementation timed-out
  71. ERR 140699088295680 19:42:23.5 UHDDevice.cpp:1027:check_rx_md_err: No packet received, implementation timed-out
  72. ALERT 140699088295680 19:42:23.5 UHDDevice.cpp:1031:check_rx_md_err: UHD: Receive timed out
  73. ALERT 140699088295680 19:42:23.5 UHDDevice.cpp:1031:check_rx_md_err: UHD: Receive timed out
  74. ALERT 140699088295680 19:42:23.5 radioInterface.cpp:374:pullBuffer: Receive error 0
  75. ALERT 140699088295680 19:42:23.5 radioInterface.cpp:374:pullBuffer: Receive error 0
  76. ERR 140699088295680 19:42:23.6 UHDDevice.cpp:1027:check_rx_md_err: No packet received, implementation timed-out
  77. ERR 140699088295680 19:42:23.6 UHDDevice.cpp:1027:check_rx_md_err: No packet received, implementation timed-out
  78. ALERT 140699088295680 19:42:23.6 UHDDevice.cpp:1031:check_rx_md_err: UHD: Receive timed out
  79. ALERT 140699088295680 19:42:23.6 UHDDevice.cpp:1031:check_rx_md_err: UHD: Receive timed out
  80. ALERT 140699088295680 19:42:23.6 radioInterface.cpp:374:pullBuffer: Receive error 0
  81. ALERT 140699088295680 19:42:23.6 radioInterface.cpp:374:pullBuffer: Receive error 0
  82. ERR 140699088295680 19:42:23.7 UHDDevice.cpp:1027:check_rx_md_err: No packet received, implementation timed-out
  83. ERR 140699088295680 19:42:23.7 UHDDevice.cpp:1027:check_rx_md_err: No packet received, implementation timed-out
  84. ALERT 140699088295680 19:42:23.7 UHDDevice.cpp:1031:check_rx_md_err: UHD: Receive timed out
  85. ALERT 140699088295680 19:42:23.7 UHDDevice.cpp:1031:check_rx_md_err: UHD: Receive timed out
  86. ALERT 140699088295680 19:42:23.7 radioInterface.cpp:374:pullBuffer: Receive error 0
  87. ALERT 140699088295680 19:42:23.7 radioInterface.cpp:374:pullBuffer: Receive error 0
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top