Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [INFO] [Environ]: SET_SUBSYSTEM_INFO.
- [INFO] [CONTENT LOAD]: Updating firmware status for: /home/studio/.config/retroarch/cores/fbneo_libretro.so on /home/studio/.config/retroarch/system
- [INFO] [CORE]: Using content: /home/studio/Downloads/Emulation stuff/New Zealand Story (E).zip.
- [INFO] Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
- [INFO] [CORE]: Unloading core..
- [INFO] [CORE]: Unloading core symbols..
- [INFO] [XINERAMA]: Xinerama version: 1.1.
- [INFO] [XINERAMA]: Xinerama screens: 1.
- [INFO] [XINERAMA]: Saved monitor #0.
- [INFO] [Video]: Average monitor Hz: 59.998800 Hz. (1.974 % frame time deviation, based on 2048 last samples).
- [INFO] RetroArch 1.9.0 (Git 5e551dd92b)
- [INFO] [Overrides]: Redirecting save file to "/home/studio/.config/retroarch/saves/New Zealand Story (E).srm".
- [INFO] [Overrides]: Redirecting save state to "/home/studio/.config/retroarch/states/New Zealand Story (E).state".
- [INFO] === Build =======================================
- [INFO] CPU Model Name: AMD Ryzen 5 3600 6-Core Processor
- [INFO] Capabilities: MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES AVX AVX2
- [INFO] Built: Aug 10 2020
- [INFO] Version: 1.9.0
- [INFO] Git: 5e551dd92b
- [INFO] =================================================
- [INFO] [CORE]: Loading dynamic libretro core from: "/home/studio/.config/retroarch/cores/fbneo_libretro.so"
- [INFO] [Overrides]: No core-specific overrides found at /home/studio/.config/retroarch/config/FinalBurn Neo/FinalBurn Neo.cfg.
- [INFO] [Overrides]: No content-dir-specific overrides found at /home/studio/.config/retroarch/config/FinalBurn Neo/Emulation stuff.cfg.
- [INFO] [Overrides]: No game-specific overrides found at /home/studio/.config/retroarch/config/FinalBurn Neo/New Zealand Story (E).cfg.
- [INFO] [Remaps]: remap directory: /home/studio/.config/retroarch/config/remaps
- [INFO] [Overrides]: Redirecting save file to "/home/studio/.config/retroarch/saves/New Zealand Story (E).srm".
- [INFO] [Overrides]: Redirecting save state to "/home/studio/.config/retroarch/states/New Zealand Story (E).state".
- [INFO] [Environ]: GET_LOG_INTERFACE.
- [INFO] [Environ]: GET_MESSAGE_INTERFACE_VERSION.
- [INFO] [CONTENT LOAD]: Content loading skipped. Implementation will load it on its own.
- [INFO] [Environ]: GET_SAVE_DIRECTORY.
- [libretro INFO] Setting save dir to /home/studio/.config/retroarch/saves
- [INFO] [Environ]: SYSTEM_DIRECTORY: "/home/studio/.config/retroarch/system".
- [libretro INFO] Setting system dir to /home/studio/.config/retroarch/system
- [libretro ERROR] [FBNeo] Romset New Zealand Story (E) is unknown, aborting
- [ERROR] [CONTENT LOAD]: Failed to load content
- [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
- [INFO] [Overrides]: Redirecting save file to "/home/studio/.config/retroarch/saves/New Zealand Story (E).srm".
- [INFO] [Overrides]: Redirecting save state to "/home/studio/.config/retroarch/states/New Zealand Story (E).state".
- [INFO] Version of libretro API: 1
- [INFO] Compiled against API: 1
- [INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
- [INFO] [Video]: Video @ 960x720
- [ERROR] [Wayland]: Failed to connect to Wayland server.
- [INFO] [GL]: Found GL context: x
- [INFO] [GL]: Detecting screen resolution 1920x1080.
- [INFO] [GLX]: Window manager is Metacity (Marco).
- [INFO] [GLX]: X = 0, Y = 0, W = 960, H = 720.
- [INFO] [GLX]: Found swap function: glXSwapIntervalEXT.
- [INFO] [GLX]: glXSwapInterval(1)
- [INFO] [GL]: Vendor: X.Org, Renderer: Radeon RX 580 Series (POLARIS10, DRM 3.38.0, 5.8.1-050801-generic, LLVM 10.0.0).
- [INFO] [GL]: Version: 4.6 (Compatibility Profile) Mesa 20.0.8.
- [INFO] [GL]: Using resolution 960x720
- [INFO] [GL]: Default shader backend found: glsl.
- [INFO] [Shader driver]: Using GLSL shader backend.
- [INFO] [GLSL]: Checking GLSL shader support ...
- [WARN] [GL]: Stock GLSL shaders will be used.
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] Setting up menu pipeline shaders for XMB ...
- [INFO] [GLSL]: Compiling ribbon shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling simple ribbon shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling snow shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling modern snow shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling bokeh shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling snowflake shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GL]: Using 4 textures.
- [INFO] [GL]: Loaded 1 program(s).
- [INFO] [GL]: Using GL_RGB565 for texture uploads.
- [INFO] [udev]: Pad #0 (/dev/input/event8) supports force feedback.
- [INFO] [udev]: Pad #0 (/dev/input/event8) supports 16 force feedback effects.
- [INFO] [Joypad]: Found joypad driver: "udev".
- [INFO] [Font]: Using font rendering backend: freetype.
- [ERROR] [DBus]: Failed to suspend screensaver via DBus.
- [INFO] [X11]: Suspending screensaver (X11, xdg-screensaver).
- [INFO] [Video]: Found display server: x11
- [INFO] [PulseAudio]: Requested 24576 bytes buffer, got 50744.
- [INFO] [Display]: Found display driver: "gl".
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Environ]: SET_SUBSYSTEM_INFO.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [MIDI]: Input disabled.
- [INFO] [MIDI]: Output disabled.
- [INFO] [MIDI]: Initialized "alsa" driver.
- [INFO] Disconnecting device from port 6.
- [INFO] Disconnecting device from port 7.
- [INFO] Disconnecting device from port 8.
- [INFO] Disconnecting device from port 9.
- [INFO] Disconnecting device from port 10.
- [INFO] Disconnecting device from port 11.
- [INFO] Disconnecting device from port 12.
- [INFO] Disconnecting device from port 13.
- [INFO] Disconnecting device from port 14.
- [INFO] Disconnecting device from port 15.
- [INFO] Disconnecting device from port 16.
- [INFO] [SRAM]: SRAM will not be saved.
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_history.lpl].
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_music_history.lpl].
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_video_history.lpl].
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_image_history.lpl].
- [INFO] [Playlist]: Loading favorites file: [/home/studio/.config/retroarch/content_favorites.lpl].
- [INFO] [GL]: VSync => on
- [INFO] [GLX]: glXSwapInterval(1)
- [INFO] [GL]: VSync => on
- [INFO] [GLX]: glXSwapInterval(1)
- [INFO] [PulseAudio]: Pausing.
- [INFO] [CORE]: Using content: /home/studio/Downloads/Emulation stuff/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.zip.
- [INFO] Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
- [INFO] [CORE]: Unloading core..
- [INFO] [CORE]: Unloading core symbols..
- [INFO] [XINERAMA]: Xinerama version: 1.1.
- [INFO] [XINERAMA]: Xinerama screens: 1.
- [INFO] [XINERAMA]: Saved monitor #0.
- [INFO] [Video]: Average monitor Hz: 59.984404 Hz. (4.854 % frame time deviation, based on 2048 last samples).
- [INFO] RetroArch 1.9.0 (Git 5e551dd92b)
- [INFO] [Overrides]: Redirecting save file to "/home/studio/.config/retroarch/saves/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.srm".
- [INFO] [Overrides]: Redirecting save state to "/home/studio/.config/retroarch/states/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.state".
- [INFO] === Build =======================================
- [INFO] CPU Model Name: AMD Ryzen 5 3600 6-Core Processor
- [INFO] Capabilities: MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES AVX AVX2
- [INFO] Built: Aug 10 2020
- [INFO] Version: 1.9.0
- [INFO] Git: 5e551dd92b
- [INFO] =================================================
- [INFO] [CORE]: Loading dynamic libretro core from: "/home/studio/.config/retroarch/cores/px68k_libretro.so"
- [INFO] [Overrides]: No core-specific overrides found at /home/studio/.config/retroarch/config/PX68K/PX68K.cfg.
- [INFO] [Overrides]: No content-dir-specific overrides found at /home/studio/.config/retroarch/config/PX68K/Emulation stuff.cfg.
- [INFO] [Overrides]: No game-specific overrides found at /home/studio/.config/retroarch/config/PX68K/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.cfg.
- [INFO] [Environ]: SET_CONTROLLER_INFO.
- [INFO] [Environ]: SET_SUPPORT_NO_GAME: yes.
- [INFO] [Environ]: GET_CORE_OPTIONS_VERSION.
- [INFO] [Environ]: GET_LANGUAGE: "0".
- [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL.
- [INFO] [Remaps]: remap directory: /home/studio/.config/retroarch/config/remaps
- [INFO] [Overrides]: Redirecting save file to "/home/studio/.config/retroarch/saves/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.srm".
- [INFO] [Overrides]: Redirecting save state to "/home/studio/.config/retroarch/states/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.state".
- [INFO] [Environ]: GET_LOG_INTERFACE.
- [INFO] [Environ]: SYSTEM_DIRECTORY: "/home/studio/.config/retroarch/system".
- [INFO] [Environ]: CORE_ASSETS_DIRECTORY: "/home/studio/.config/retroarch/downloads".
- [INFO] [Environ]: GET_SAVE_DIRECTORY.
- [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
- [INFO] [Environ]: GET_DISK_CONTROL_INTERFACE_VERSION.
- [INFO] [Environ]: SET_DISK_CONTROL_EXT_INTERFACE.
- [INFO] [CONTENT LOAD]: Content loading skipped. Implementation will load it on its own.
- [libretro INFO] LOAD EMU
- [INFO] Version of libretro API: 1
- [INFO] Compiled against API: 1
- [INFO] [Cheats]: Load game-specific cheatfile: /home/studio/.config/retroarch/cheats/PX68K/new_zealand_story,_the_(1989)(sharp_-_sps)(disk_1_of_2)(disk_a)[a2]_usa.cht
- [INFO] [Audio]: Set audio input rate to: 44144.14 Hz.
- [INFO] [Video]: Video @ 2400x1800
- [ERROR] [Wayland]: Failed to connect to Wayland server.
- [INFO] [GL]: Found GL context: x
- [INFO] [GL]: Detecting screen resolution 1920x1080.
- [INFO] [GLX]: Window manager is Metacity (Marco).
- [INFO] [GLX]: X = 0, Y = 0, W = 2400, H = 1800.
- [INFO] [GLX]: Found swap function: glXSwapIntervalEXT.
- [INFO] [GLX]: glXSwapInterval(1)
- [INFO] [GL]: Vendor: X.Org, Renderer: Radeon RX 580 Series (POLARIS10, DRM 3.38.0, 5.8.1-050801-generic, LLVM 10.0.0).
- [INFO] [GL]: Version: 4.6 (Compatibility Profile) Mesa 20.0.8.
- [INFO] [GL]: Using resolution 1918x1029
- [INFO] [GL]: Default shader backend found: glsl.
- [INFO] [Shader driver]: Using GLSL shader backend.
- [INFO] [GLSL]: Checking GLSL shader support ...
- [WARN] [GL]: Stock GLSL shaders will be used.
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] Setting up menu pipeline shaders for XMB ...
- [INFO] [GLSL]: Compiling ribbon shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling simple ribbon shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling snow shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling modern snow shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling bokeh shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GLSL]: Compiling snowflake shader..
- [INFO] [GLSL]: Found GLSL vertex shader.
- [INFO] [GLSL]: Found GLSL fragment shader.
- [INFO] [GLSL]: Linking GLSL program.
- [INFO] [GL]: Using 4 textures.
- [INFO] [GL]: Loaded 1 program(s).
- [INFO] [GL]: Using GL_RGB565 for texture uploads.
- [INFO] [udev]: Pad #0 (/dev/input/event8) supports force feedback.
- [INFO] [udev]: Pad #0 (/dev/input/event8) supports 16 force feedback effects.
- [INFO] [Joypad]: Found joypad driver: "udev".
- [INFO] [Font]: Using font rendering backend: freetype.
- [ERROR] [DBus]: Failed to suspend screensaver via DBus.
- [INFO] [X11]: Suspending screensaver (X11, xdg-screensaver).
- [INFO] [Video]: Found display server: x11
- [INFO] [PulseAudio]: Requested 24576 bytes buffer, got 50744.
- [INFO] [Display]: Found display driver: "gl".
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [MIDI]: Input disabled.
- [INFO] [MIDI]: Output disabled.
- [INFO] [MIDI]: Initialized "alsa" driver.
- [libretro INFO] Set Controller Device: 1, Port: 0 1 0
- [INFO] [Environ]: SET_INPUT_DESCRIPTORS:
- [libretro INFO] Set Controller Device: 1, Port: 1 1 1
- [INFO] [Environ]: SET_INPUT_DESCRIPTORS:
- [INFO] Disconnecting device from port 6.
- [INFO] Disconnecting device from port 7.
- [INFO] Disconnecting device from port 8.
- [INFO] Disconnecting device from port 9.
- [INFO] Disconnecting device from port 10.
- [INFO] Disconnecting device from port 11.
- [INFO] Disconnecting device from port 12.
- [INFO] Disconnecting device from port 13.
- [INFO] Disconnecting device from port 14.
- [INFO] Disconnecting device from port 15.
- [INFO] Disconnecting device from port 16.
- [INFO] [SRAM]: SRAM will not be saved.
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_history.lpl].
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_music_history.lpl].
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_video_history.lpl].
- [INFO] [Playlist]: Loading history file: [/home/studio/.config/retroarch/content_image_history.lpl].
- [INFO] [Playlist]: Loading favorites file: [/home/studio/.config/retroarch/content_favorites.lpl].
- [INFO] [GL]: VSync => on
- [INFO] [GLX]: glXSwapInterval(1)
- [INFO] [Playlist]: Written to playlist file: /home/studio/.config/retroarch/content_history.lpl
- [INFO] [Font]: Using font rendering backend: freetype.
- [INFO] [Font]: Using font rendering backend: freetype.
- [libretro INFO] Parsing arguments ...
- [libretro INFO] 0 : px68k
- [libretro INFO] 1 : /tmp/New Zealand Story, The (1989)(Sharp - SPS)(Disk 1 of 2)(Disk A)[a2].dim
- [libretro INFO] PX68K Ver."0.15+"
- [libretro INFO] Libretro...
- [libretro INFO] /home/studio/.config/retroarch/system/keropi
- [libretro INFO] cur_dir_str / 1
- [libretro INFO] fp:0 (iplrom.dat)
- [libretro INFO] fp:0 (iplrom30.dat)
- [libretro INFO] fp:0 (iplromco.dat)
- [libretro INFO] fp:0 (iplromxv.dat)
Add Comment
Please, Sign In to add comment