Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.6-arch1-1] (local build)
- Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST1000DM003-1SB102
- Serial Number: Z9A6XVXP
- LU WWN Device Id: 5 000c50 092bc778f
- Firmware Version: CC43
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5528
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Tue Feb 27 10:13:16 2024 CST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 106) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x1085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 078 063 006 Pre-fail Always - 68019014
- 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1215
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 084 060 045 Pre-fail Always - 295293906
- 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14985
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1204
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 067 049 040 Old_age Always - 33 (Min/Max 23/37)
- 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1764
- 194 Temperature_Celsius 0x0022 033 013 000 Old_age Always - 33 (0 13 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 006 001 000 Old_age Always - 68019014
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 14933h+17m+06.537s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25434085641
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 35412667108
- SMART Error Log Version: 1
- ATA Error Count: 2
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 78 b5 b9 06 Error: WP at LBA = 0x06b9b578 = 112833912
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 18 d8 13 6f 40 00 00:00:27.295 WRITE FPDMA QUEUED
- 60 00 08 78 b5 b9 46 00 00:00:26.842 READ FPDMA QUEUED
- 61 00 08 08 a8 73 40 00 00:00:26.842 WRITE FPDMA QUEUED
- 2f 00 01 10 00 00 20 00 00:00:26.693 READ LOG EXT
- 60 00 08 78 b5 b9 46 00 00:00:24.364 READ FPDMA QUEUED
- Error 1 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 78 b5 b9 06 Error: UNC at LBA = 0x06b9b578 = 112833912
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 78 b5 b9 46 00 00:00:24.364 READ FPDMA QUEUED
- 60 00 08 08 b6 b9 46 00 00:00:24.364 READ FPDMA QUEUED
- 60 00 08 00 b6 b9 46 00 00:00:24.363 READ FPDMA QUEUED
- 60 00 08 f8 b5 b9 46 00 00:00:24.347 READ FPDMA QUEUED
- 60 00 08 78 b6 b9 46 00 00:00:24.332 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 14984 -
- # 2 Extended offline Interrupted (host reset) 00% 14982 -
- # 3 Short offline Completed without error 00% 14925 -
- # 4 Short offline Completed without error 00% 14734 -
- # 5 Short offline Completed without error 00% 13670 -
- # 6 Short offline Completed without error 00% 12781 -
- # 7 Short offline Completed without error 00% 11293 -
- # 8 Short offline Completed without error 00% 4445 -
- # 9 Short offline Completed without error 00% 3391 -
- #10 Short offline Completed without error 00% 0 -
- #11 Short offline Completed without error 00% 0 -
- #12 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- The above only provides legacy SMART information - try 'smartctl -x' for more
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
