# ##################################
# Martin Jerry Dimmer MJ-SD01
# ##################################
# D3 GPIO0: up button (inverted, input_pullup)
# TX GPIO1: down button (inverted, input_pullup)
# RX GPIO3: led5 (inverted)
# D2 GPIO4: red led (inverted)
# D1 GPIO5: led4 (inverted)
# D6 GPIO12: led3 (inverted)
# D7 GPIO13: pwm
# D5 GPIO14: led2 (inverted)
# D8 GPIO15: main button (input_pullup)
# D0 GPIO16: blue led + relay + led1 (inverted)
# ##################################


esphome:
  name: mj_dimmer1_2
  platform: ESP8266
  board: esp01_1m

wifi:
  # https://esphome.io/components/wifi
  ssid: "YOUR_WIFI"
  password: "YOUR_PASSWORD"
  manual_ip:
    static_ip: 192.168.0.122
    gateway: 192.168.0.1
    subnet: 255.255.255.0
    #dns1:
  ap:
    ssid: mj_dimmer1_2

web_server:


#captive_portal:

# Enable logging
logger:
  level: verbose

# Enable Home Assistant API
api:

ota:


status_led:
  # https://esphome.io/components/status_led
  pin:
    number: GPIO4   # Red LED
    inverted: True


switch:
  - platform: restart
    name: "mj_dimmer_1"

binary_sensor:
  - platform: gpio
    # https://esphome.io/components/binary_sensor/gpio.html
    pin:
      number: GPIO0
      inverted: True
      mode: INPUT_PULLUP
    name: "MJ Dimmer 1 Up Button"
    id: up_button
  - platform: gpio
    # https://esphome.io/components/binary_sensor/gpio.html
    pin:
      number: GPIO1
      inverted: True
      mode: INPUT_PULLUP
    name: "MJ Dimmer 1 Down Button"
    id: down_button
  - platform: gpio
    # https://esphome.io/components/binary_sensor/gpio.html
    pin:
      number: GPIO15
      inverted: False
      mode: INPUT_PULLUP
    name: "MJ Dimmer 1 Power Button"
    id: power_button