Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2016.03 (Sep 13 2016 - 20:27:44 -0700)
- Model: Digilent-Zybo-Linux-BD-v2015.4
- Board: Xilinx Zynq
- I2C: ready
- DRAM: ECC disabled 512 MiB
- MMC: sdhci@e0100000: 0
- SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: ZYNQ GEM: e000b000, phyaddr 1, interface rgmii-id
- Warning: ethernet@e000b000 using MAC address from ROM
- eth0: ethernet@e000b000
- U-BOOT for Digilent-Zybo-Linux-BD-v2015_4
- ethernet@e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
- ethernet@e000b000: No link.
- Hit any key to stop autoboot: 0
- Device: sdhci@e0100000
- Manufacturer ID: 1b
- OEM: 534d
- Name: 00000
- Tran Speed: 50000000
- Rd Block Len: 512
- SD version 3.0
- High Capacity: Yes
- Capacity: 29.8 GiB
- Bus Width: 4-bit
- Erase Group Size: 512 Bytes
- reading image.ub
- 6438464 bytes read in 556 ms (11 MiB/s)
- ## Loading kernel from FIT Image at 04000000 ...
- Using 'conf@1' configuration
- Verifying Hash Integrity ... OK
- Trying 'kernel@1' kernel subimage
- Description: PetaLinux Kernel
- Type: Kernel Image
- Compression: gzip compressed
- Data Start: 0x040000f0
- Data Size: 6411586 Bytes = 6.1 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x00008000
- Entry Point: 0x00008000
- Hash algo: crc32
- Hash value: 88f6573f
- Verifying Hash Integrity ... crc32+ OK
- ## Loading fdt from FIT Image at 04000000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
- Description: Flattened Device Tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x0461d718
- Data Size: 25580 Bytes = 25 KiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: a822c6d9
- Verifying Hash Integrity ... crc32+ OK
- Booting using the fdt blob at 0x461d718
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 07ff6000, end 07fff3eb ... OK
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Linux version 4.0.0-xilinx (zynq@Zynq) (gcc version 4.9.2 (Sourcery CodeBench Lite 2015.05-17) ) #11 SMP PREEMPT Tue Sep 13 20:28:06 PDT 2016
- CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Digilent-Zybo-Linux-BD-v2015.4
- bootconsole [earlycon0] enabled
- cma: Reserved 40 MiB at 0x1d800000
- Memory policy: Data cache writealloc
- PERCPU: Embedded 11 pages/cpu @dd3bc000 s12672 r8192 d24192 u45056
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- Kernel command line: console=ttyPS0,115200 earlyprintk
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Memory: 468548K/524288K available (4767K kernel code, 223K rwdata, 1720K rodata, 3044K init, 208K bss, 14780K reserved, 40960K cma-reserved, 0K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc065e0ec (6489 kB)
- .init : 0xc065f000 - 0xc0958000 (3044 kB)
- .data : 0xc0958000 - 0xc098ff60 ( 224 kB)
- .bss : 0xc098ff60 - 0xc09c42f4 ( 209 kB)
- Preemptible hierarchical RCU implementation.
- Additional per-CPU info printed with stalls.
- RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- NR_IRQS:16 nr_irqs:16 16
- L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
- L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
- L2C-310 erratum 769419 enabled
- L2C-310 enabling early BRESP for Cortex-A9
- L2C-310 full line of zeros enabled for Cortex-A9
- L2C-310 ID prefetch enabled, offset 1 lines
- L2C-310 dynamic clock gating enabled, standby mode enabled
- L2C-310 cache controller enabled, 8 ways, 512 kB
- L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
- slcr mapped to e0804000
- zynq_clock_init: clkc starts at e0804100
- Zynq clock init
- sched_clock: 64 bits at 325MHz, resolution 3ns, wraps every 3383112499200ns
- timer #0 at e0808000, irq=17
- Console: colour dummy device 80x30
- Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x483ab0 - 0x483b08
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- Brought up 2 CPUs
- SMP: Total of 2 processors activated (2591.94 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41210000: registered, base is 902
- XGpio: /amba_pl/gpio@41230000: registered, base is 901
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41250000: registered, base is 899
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41250000: dual channel registered, base is 897
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41200000: registered, base is 893
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41260000: registered, base is 889
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41220000: registered, base is 885
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41240000: registered, base is 883
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41240000: dual channel registered, base is 879
- vgaarb: loaded
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- usb_phy@0 supply vcc not found, using dummy regulator
- media: Linux media interface: v0.10
- Linux video capture interface: v2.00
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- EDAC MC: Ver: 3.0.0
- Advanced Linux Sound Architecture Driver Initialized.
- Switched to clocksource arm_global_timer
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- futex hash table entries: 512 (order: 3, 32768 bytes)
- jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
- dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
- dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
- xilinx-vdma 43000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
- e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 145, base_baud = 6250000) is a xuartps
- console [ttyPS0] enabled
- bootconsole [earlycon0] disabled
- Built with PetaLinux v2015.4 (Yocto 1.8) Digilent-Zybo-Linux-BD-v2015_4 /dev/ttyPS1
- Digilent-Zybo-Linux-BD-v2015_4 login: root
- Password:
- root@Digilent-Zybo-Linux-BD-v2015_4:~# cat /proc/interrupts
- CPU0 CPU1
- 16: 0 0 GIC 27 gt
- 17: 0 0 GIC 43 ttc_clockevent
- 18: 426 372 GIC 29 twd
- 21: 43 0 GIC 39 f8007100.adc
- 141: 8 0 GIC 57 cdns-i2c
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41210000: registered, base is 902
- XGpio: /amba_pl/gpio@41230000: registered, base is 901
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41250000: registered, base is 899
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41250000: dual channel registered, base is 897
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41200000: registered, base is 893
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41260000: registered, base is 889
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41220000: registered, base is 885
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41240000: registered, base is 883
- GPIO IRQ not connected
- XGpio: /amba_pl/gpio@41240000: dual channel registered, base is 879
- vgaarb: loaded
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- usb_phy@0 supply vcc not found, using dummy regulator
- media: Linux media interface: v0.10
- Linux video capture interface: v2.00
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- EDAC MC: Ver: 3.0.0
- Advanced Linux Sound Architecture Driver Initialized.
- Switched to clocksource arm_global_timer
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- futex hash table entries: 512 (order: 3, 32768 bytes)
- jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
- dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
- dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
- xilinx-vdma 43000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
- e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 145, base_baud = 6250000) is a xuartps
- console [ttyPS0] enabled
- bootconsole [earlycon0] disabled
- Built with PetaLinux v2015.4 (Yocto 1.8) Digilent-Zybo-Linux-BD-v2015_4 /dev/ttyPS1
- Digilent-Zybo-Linux-BD-v2015_4 login: root
- Password:
- root@Digilent-Zybo-Linux-BD-v2015_4:~# cat /proc/interrupts
- CPU0 CPU1
- 16: 0 0 GIC 27 gt
- 17: 0 0 GIC 43 ttc_clockevent
- 18: 426 372 GIC 29 twd
- 21: 43 0 GIC 39 f8007100.adc
- 141: 8 0 GIC 57 cdns-i2c
- 142: 5 0 GIC 80 cdns-i2c
- 144: 0 0 GIC 35 f800c000.ocmc
- 145: 28 0 GIC 59 xuartps
- 146: 50 0 GIC 82 xuartps
- 147: 0 0 GIC 58 e0006000.spi
- 148: 0 0 GIC 81 e0007000.spi
- 149: 3 0 GIC 51 e000d000.spi
- 150: 0 0 GIC 54 eth0
- 151: 81 0 GIC 56 mmc0
- 152: 0 0 GIC 45 f8003000.dmac
- 153: 0 0 GIC 46 f8003000.dmac
- 154: 0 0 GIC 47 f8003000.dmac
- 155: 0 0 GIC 48 f8003000.dmac
- 156: 0 0 GIC 49 f8003000.dmac
- 157: 0 0 GIC 72 f8003000.dmac
- 158: 0 0 GIC 73 f8003000.dmac
- 159: 0 0 GIC 74 f8003000.dmac
- 160: 0 0 GIC 75 f8003000.dmac
- 161: 0 0 GIC 40 f8007000.devcfg
- 167: 0 0 GIC 53 e0002000.usb
- 168: 0 0 GIC 41 f8005000.watchdog
- 172: 0 0 GIC 62 xilinx-vdma-controller
- 173: 0 0 GIC 63 xilinx_vtc
- IPI1: 0 0 Timer broadcast interrupts
- IPI2: 939 698 Rescheduling interrupts
- IPI3: 0 0 Function call interrupts
- IPI4: 11 40 Single function call interrupts
- IPI5: 0 0 CPU stop interrupts
- IPI6: 0 0 IRQ work interrupts
- IPI7: 0 0 completion interrupts
- Err: 0
- root@Digilent-Zybo-Linux-BD-v2015_4:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement