API tools faq
paste
Advertisement
Guest User

Error LOG OAI

a guest
Mar 20th, 2020
504
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 33.24 KB | None | 0 0
raw download clone embed print report
  1. oai@oai-ran:~/openairinterface5g$ sudo ./targets/bin/lte-softmodem.Rel15 -O ~/opencells-mods/enb.10MHz.b200 --rf-config-file ./targets/ARCH/LMSSDR/LimeSDR.ini
  2. [CONFIG] get parameters from libconfig /home/oai/opencells-mods/enb.10MHz.b200 , debug flags: 0x00000000
  3. [CONFIG] function config_libconfig_init returned 0
  4. [CONFIG] config module libconfig loaded
  5. [LIBCONFIG] config: 1/1 parameters successfully set, (1 to default value)
  6. # /dev/cpu_dma_latency set to 0us
  7. [LIBCONFIG] log_config: 3/3 parameters successfully set, (1 to default value)
  8. [LIBCONFIG] log_config: 52/52 parameters successfully set, (46 to default value)
  9. [LIBCONFIG] log_config: 52/52 parameters successfully set, (52 to default value)
  10. [LIBCONFIG] log_config: 15/15 parameters successfully set, (15 to default value)
  11. [LIBCONFIG] log_config: 15/15 parameters successfully set, (15 to default value)
  12. log init done
  13. Reading in command-line options
  14. [LIBCONFIG] (root): 19/19 parameters successfully set, (16 to default value)
  15. [LIBCONFIG] (root): 5/5 parameters successfully set, (4 to default value)
  16. Getting ENBSParams
  17. [LIBCONFIG] (root): 3/3 parameters successfully set, (1 to default value)
  18. [LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default value)
  19. [CONFIG] parallel_conf is set to 0
  20. [LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default value)
  21. [CONFIG] worker_conf is set to 0
  22. Configuration: nb_rrc_inst 1, nb_L1_inst 1, nb_ru 1
  23. [LIBCONFIG] loader: 2/2 parameters successfully set, (2 to default value)
  24. [LIBCONFIG] loader.NB_IoT: 2/2 parameters successfully set, (1 to default value)
  25. [LOADER] library libNB_IoT.so is not loaded: libNB_IoT.so: cannot open shared object file: No such file or directory
  26.                nb_nbiot_rrc_inst 0, nb_nbiot_L1_inst 0, nb_nbiot_macrlc_inst 0
  27. [LIBCONFIG] TTracer: 4/4 parameters successfully set, (4 to default value)
  28. configuring for RAU/RRU
  29. CPU Freq is 1.992076
  30. ITTI init, useMME: 1
  31. [TMR]   Starting itti queue: TASK_UNKNOWN as task 0
  32. [TMR]   Starting itti queue: TASK_TIMER as task 1
  33. [TMR]   Starting itti queue: TASK_L2L1 as task 2
  34. [TMR]   Starting itti queue: TASK_BM as task 3
  35. [TMR]   Starting itti queue: TASK_PHY_ENB as task 4
  36. [TMR]   Starting itti queue: TASK_MAC_ENB as task 5
  37. [TMR]   Starting itti queue: TASK_RLC_ENB as task 6
  38. [TMR]   Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7
  39. [TMR]   Starting itti queue: TASK_PDCP_ENB as task 8
  40. [TMR]   Starting itti queue: TASK_DATA_FORWARDING as task 9
  41. [TMR]   Starting itti queue: TASK_END_MARKER as task 10
  42. [TMR]   Starting itti queue: TASK_RRC_ENB as task 11
  43. [TMR]   Starting itti queue: TASK_RRC_GNB as task 12
  44. [TMR]   Starting itti queue: TASK_RAL_ENB as task 13
  45. [TMR]   Starting itti queue: TASK_S1AP as task 14
  46. [TMR]   Starting itti queue: TASK_X2AP as task 15
  47. [TMR]   Starting itti queue: TASK_M2AP_ENB as task 16
  48. [TMR]   Starting itti queue: TASK_M2AP_MCE as task 17
  49. [TMR]   Starting itti queue: TASK_M3AP as task 18
  50. [TMR]   Starting itti queue: TASK_M3AP_MME as task 19
  51. [TMR]   Starting itti queue: TASK_M3AP_MCE as task 20
  52. [TMR]   Starting itti queue: TASK_SCTP as task 21
  53. [TMR]   Starting itti queue: TASK_ENB_APP as task 22
  54. [TMR]   Starting itti queue: TASK_GNB_APP as task 23
  55. [TMR]   Starting itti queue: TASK_MCE_APP as task 24
  56. [TMR]   Starting itti queue: TASK_MME_APP as task 25
  57. [TMR]   Starting itti queue: TASK_FLEXRAN_AGENT as task 26
  58. [TMR]   Starting itti queue: TASK_PHY_UE as task 27
  59. [TMR]   Starting itti queue: TASK_MAC_UE as task 28
  60. [TMR]   Starting itti queue: TASK_RLC_UE as task 29
  61. [TMR]   Starting itti queue: TASK_PDCP_UE as task 30
  62. [TMR]   Starting itti queue: TASK_RRC_UE as task 31
  63. [TMR]   Starting itti queue: TASK_NAS_UE as task 32
  64. [TMR]   Starting itti queue: TASK_RAL_UE as task 33
  65. [TMR]   Starting itti queue: TASK_MSC as task 34
  66. [TMR]   Starting itti queue: TASK_GTPV1_U as task 35
  67. [TMR]   Starting itti queue: TASK_UDP as task 36
  68. [TMR]   Starting itti queue: TASK_CU_F1 as task 37
  69. [TMR]   Starting itti queue: TASK_DU_F1 as task 38
  70. [LIBCONFIG] opt: 3/3 parameters successfully set, (3 to default value)
  71. [OPT]   OPT disabled
  72. Send signal 35 to display resource usage...
  73. reported resolution = 1 ns
  74. [HW]   Version: Branch: develop Abrev. Hash: 82e97fc Date: Sun Mar 15 12:10:33 2020 +0100
  75. Runtime table
  76. [PHY]   RC.eNB = 0x2838aa0
  77. [LIBCONFIG] L1s.[0]: 24/24 parameters successfully set, (22 to default value)
  78. [PHY]   RC.eNB[0] = 0x2838b50
  79. [PHY]   RC.eNB[0][0] = 0x7f6a2f30a010
  80. [ENB_APP]   Initializing northbound interface for L1
  81. [PHY]   l1_north_init_eNB() RC.nb_L1_inst:1
  82. [PHY]   l1_north_init_eNB() RC.nb_L1_CC[0]:1
  83. [PHY]   l1_north_init_eNB() RC.eNB[0][0] installing callbacks
  84. [PHY]   read_config_and_init() RC.nb_L1_inst: 1
  85. [LIBCONFIG] MACRLCs.[0]: 20/20 parameters successfully set, (15 to default value)
  86. [LIBCONFIG] MACRLCs.[0]: 20/20 parameters successfully set, (15 to default value)
  87. [MAC]   [MAIN] Init function start:nb_macrlc_inst=1
  88. [PDCP]   PDCP layer has been initialized
  89. Configuring local RRC for MACRLC
  90. [ENB_APP]   sched mode = default 0 [default]
  91. [MAC]   read_config_and_init() RC.nb_macrlc_inst: 1
  92. [PHY]   l1_north_init_eNB() RC.nb_L1_inst:1
  93. [PHY]   l1_north_init_eNB() RC.nb_L1_CC[0]:1
  94. [PHY]   l1_north_init_eNB() RC.eNB[0][0] installing callbacks
  95. [LIBCONFIG] (root): 3/3 parameters successfully set, (1 to default value)
  96. [LIBCONFIG] eNBs.[0]: 20/20 parameters successfully set, (11 to default value)
  97. [RRC]   Instance 0: Southbound Transport local_mac
  98. [RRC]   Setting node_type to ngran_eNB
  99. [LIBCONFIG] eNBs.[0].plmn_list.[0]: 3/3 parameters successfully set, (0 to default value)
  100. [RRC]   num component carriers 1
  101. [RRC]   enb_config::RCconfig_RRC() parameter number: 0, total number of parameters: 78, ccspath: eNBs.[0].component_carriers.[0]
  102.  
  103. [LIBCONFIG] eNBs.[0].component_carriers.[0]: 78/78 parameters successfully set, (9 to default value)
  104. phich.resource 0 (ONESIXTH), phich.duration 0 (NORMAL)
  105. No eMBMS configuration, skipping it
  106. [LIBCONFIG] eNBs.[0].component_carriers.[0].emtc_parameters: 88/88 parameters successfully set, (88 to default value)
  107. No eMTC configuration, skipping it
  108. [LIBCONFIG] eNBs.[0].component_carriers.[0].SLparameters: 39/39 parameters successfully set, (39 to default value)
  109. No SL configuration skipping it
  110. [LIBCONFIG] eNBs.[0].srb1_parameters: 6/6 parameters successfully set, (0 to default value)
  111. [RRC]   Node type 0
  112.  [LIBCONFIG] (root): 3/3 parameters successfully set, (1 to default value)
  113. [LIBCONFIG] NETWORK_CONTROLLER: 6/6 parameters successfully set, (0 to default value)
  114. [LIBCONFIG] RUs.[0]: 25/25 parameters successfully set, (16 to default value)
  115. Creating RC.ru[0]:0x2869a30
  116. Setting function for RU 0 to eNodeB_3GPP
  117. [PHY]   number of L1 instances 1, number of RU 1, number of CPU cores 8
  118. [FLEXRAN_AGENT]   FlexRAN Agent for eNB 0 is DISABLED
  119. [PDCP]   PDCP layer has been initialized
  120. [PDCP]   pdcp init,usegtp
  121. [PDCP]   ENB pdcp will use tun interface for MBMS
  122. [NETLINK]Opened socket oaitun_enm1 with fd 84
  123. returnValue 0
  124. returnValue 0
  125. returnValue 0
  126. [OIP]   Interface oaitun_enm1 successfully configured, ip address 10.0.2.1, mask 255.255.255.0 broadcast address 10.0.2.255
  127. [ENB_APP]   Creating ENB_APP eNB Task
  128. [TMR]   Created Posix thread TASK_ENB_APP
  129. [RRC]   Creating RRC eNB Task
  130. [TMR]   Created Posix thread TASK_RRC_ENB
  131. [RRC]   Entering main loop of RRC message task
  132. [LIBCONFIG] (root): 3/3 parameters successfully set, (1 to default value)
  133. [SCTP]   Starting SCTP layer
  134. [TMR]   Created Posix thread TASK_SCTP
  135. [LIBCONFIG] eNBs.[0]: 20/20 parameters successfully set, (11 to default value)
  136. [S1AP]   Starting S1AP layer
  137. [TMR]   Created Posix thread TASK_S1AP
  138. [LIBCONFIG] eNBs.[0].plmn_list.[0]: 3/3 parameters successfully set, (0 to default value)
  139. [UDP]   Initializing UDP task interface
  140. [UDP]   Initializing UDP task interface: DONE
  141. [TMR]   Created Posix thread TASK_UDP
  142. [LIBCONFIG] eNBs.[0].component_carriers.[0]: 78/78 parameters successfully set, (9 to default value)
  143. [LIBCONFIG] eNBs.[0].mme_ip_address.[0]: 5/5 parameters successfully set, (0 to default value)
  144. [TMR]   Created Posix thread TASK_GTPV1_U
  145. [GTPV1U]   Initializing GTPU stack 0x176b2f8
  146. [LIBCONFIG] eNBs.[0]: 1/1 parameters successfully set, (0 to default value)
  147. [LIBCONFIG] eNBs.[0].SCTP: 2/2 parameters successfully set, (0 to default value)
  148. [X2AP]   X2AP is disabled.
  149. [MAC]   Creating MAC eNB Task
  150. [LIBCONFIG] eNBs.[0].NETWORK_INTERFACES: 11/11 parameters successfully set, (2 to default value)
  151. [MAC]   Starting main loop of MAC message task
  152. [TMR]   Created Posix thread TASK_MAC_ENB
  153. [GTPV1U]   Configuring GTPu
  154. [LIBCONFIG] (root): 3/3 parameters successfully set, (1 to default value)
  155. [LIBCONFIG] eNBs.[0].NETWORK_INTERFACES: 3/3 parameters successfully set, (0 to default value)
  156. [RRC]   [eNB 0] Received RRC_CONFIGURATION_REQ : 0x28714ec
  157. [GTPV1U]   Configuring GTPu address : 192.168.1.53 -> 3501a8c0
  158. [RRC]   [FRAME 00000][eNB][MOD 00][RNTI 0] Init...
  159. [ENB_APP]   default drx 2
  160. [ENB_APP]   [eNB 0] eNB_app_register via S1AP for instance 0
  161. [RRC]   [FRAME 00000][eNB][MOD 00][RNTI 0] Checking release
  162. [GTPV1U]   Tx UDP_INIT IP addr 192.168.1.53 (868)
  163. [LIBCONFIG] eNBs.[0]: 1/1 parameters successfully set, (1 to default value)
  164. [RRC]   [FRAME 00000][eNB][MOD 00][RNTI 0] Rel14 RRC detected, MBMS flag 0
  165. [S1AP]   Registered new eNB[0] and macro eNB id 3584
  166. [S1AP]   [eNB 0] check the mme registration state
  167. [UDP]   Initializing UDP for local address 192.168.1.53 with port 2152
  168. [RRC]   [eNB 0] Node type 0
  169.  [RRC]   configuration->schedulingInfoSIB1_BR_r13[CC_id] 0
  170. [RRC]   Configuring MIB (N_RB_DL 50,phich_Resource 0,phich_Duration 0)
  171. [RRC]   [MIB] systemBandwidth 3, phich_duration 0, phich_resource 0, sfn 0
  172. [RRC]   [MIB] schedulingInfoSIB1 0
  173. [UDP]   Inserting new descriptor for task 35, sd 86
  174. [UDP]   Initializing UDP for local address 192.168.1.53 with port 2152: DONE
  175. [SCTP]   sctp_bindx SCTP_BINDX_ADD_ADDR socket bound to : 192.168.1.53
  176. [SCTP]   Converted ipv4 address 192.168.1.54 to network type
  177. [SCTP]   connectx assoc_id  44 in progress..., used 1 addresses
  178. [SCTP]   Inserted new descriptor for sd 85 in list, nb elements 1, assoc_id 44
  179. [RRC]   [eNB 0] Configuration SIB2/3, eMBMS = 0
  180. [RRC]   do_SIB23, size 38
  181.  [MAC]   Configuring MIB for instance 0, CCid 0 : (band 18,N_RB_DL 50,Nid_cell 0,p 1,DL freq 860000000,phich_config.resource 0, phich_config.duration 0)
  182. [MAC]   config_mib() NFAPI_CONFIG_REQUEST(num_tlv:16) DL_BW:50 UL_BW:50 Ncp 0,p_eNB 1,earfcn 5850,band 18,phich_resource 0 phich_duration 0 phich_power_offset 6000 PSS 6000 SSS 6000 PCI 0 PBCH repetition 0
  183. [MAC]   [CONFIG]SIB2/3 Contents (partial)
  184. [MAC]   [CONFIG]pusch_config_common.n_SB = 1
  185. [MAC]   [CONFIG]pusch_config_common.hoppingMode = 0
  186. [MAC]   [CONFIG]pusch_config_common.pusch_HoppingOffset = 0
  187. [MAC]   [CONFIG]pusch_config_common.enable64QAM = 0
  188. [MAC]   [CONFIG]pusch_config_common.groupHoppingEnabled = 1
  189. [MAC]   [CONFIG]pusch_config_common.groupAssignmentPUSCH = 0
  190. [MAC]   [CONFIG]pusch_config_common.sequenceHoppingEnabled = 0
  191. [MAC]   [CONFIG]pusch_config_common.cyclicShift  = 1
  192. [PHY]   Configuring MIB for instance 0, CCid 0 : (band 18,N_RB_DL 50, N_RB_UL 50, Nid_cell 0,eNB_tx_antenna_ports 1,Ncp 0,DL freq 5850,phich_config.resource 0, phich_config.duration 0)
  193. [PHY]   Initializing frame parms for N_RB_DL 50, Ncp 0, osf 1
  194. [PHY]   lte_parms.c: Setting N_RB_DL to 50, ofdm_symbol_size 1024
  195. [LIBCONFIG] loader.coding: 2/2 parameters successfully set, (1 to default value)
  196. [LOADER] library libcoding.so successfully loaded
  197. [SCTP]   Found data for descriptor 85
  198. [SCTP]   Received notification for sd 85, type 32769
  199. [SCTP]   Client association changed: 0
  200. [SCTP]   ----------------------
  201. [SCTP]   Peer addresses:
  202. [SCTP]       - [192.168.1.54]
  203. [SCTP]   ----------------------
  204. [SCTP]   ----------------------
  205. [SCTP]   SCTP Status:
  206. [SCTP]   assoc id .....: 44
  207. [SCTP]   state ........: 4
  208. [SCTP]   instrms ......: 2
  209. [SCTP]   outstrms .....: 2
  210. [SCTP]   fragmentation : 1452
  211. [SCTP]   pending data .: 0
  212. [SCTP]   unack data ...: 0
  213. [SCTP]   rwnd .........: 106496
  214. [SCTP]   peer info     :
  215. [SCTP]       state ....: 2
  216. [SCTP]       cwnd .....: 4380
  217. [SCTP]       srtt .....: 0
  218. [SCTP]       rto ......: 3000
  219. [SCTP]       mtu ......: 1500
  220. [SCTP]   ----------------------
  221. [SCTP]   Comm up notified for sd 85, assigned assoc_id 44
  222. [S1AP]   3584 -> 00e000
  223. [SCTP]   Successfully sent 59 bytes on stream 0 for assoc_id 44
  224. [SCTP]   Found data for descriptor 85
  225. [SCTP]   Received notification for sd 85, type 32777
  226. [SCTP]   Found data for descriptor 85
  227. [SCTP]   [44][85] Msg of length 27 received from port 36412, on stream 0, PPID 18
  228. [S1AP]   servedGUMMEIs.list.count 1
  229. [S1AP]   servedPLMNs.list.count 1
  230. [S1AP]   S1AP_FIND_PROTOCOLIE_BY_ID: /home/oai/openairinterface5g/openair3/S1AP/s1ap_eNB_handlers.c 372: ie is NULL
  231. [ENB_APP]   [eNB 0] Received S1AP_REGISTER_ENB_CNF: associated MME 1
  232. [PHY]   prach_config_common.rootSequenceIndex = 0
  233. [PHY]   prach_config_common.prach_ConfigInfo.prach_ConfigIndex = 0
  234. [PHY]   prach_config_common.prach_ConfigInfo.highSpeedFlag = 0
  235. [PHY]   prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig = 1
  236. [PHY]   prach_config_common.prach_ConfigInfo.prach_FreqOffset = 2
  237. [PHY]   pusch_config_common.n_SB = 1
  238. [PHY]   pusch_config_common.hoppingMode = 0
  239. [PHY]   pusch_config_common.pusch_HoppingOffset = 0
  240. [PHY]   pusch_config_common.enable64QAM = 0
  241. [PHY]   pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 1
  242. [PHY]   pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0
  243. [PHY]   pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0
  244. [PHY]   pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 2
  245. [PHY]   eNB 0/0 configured
  246. [RRC]   [eNB] handover active state is 0
  247. [RRC]   [eNB] eMBMS active state is 0
  248. [RRC]   [FRAME 00000][eNB][MOD 00][RNTI 0] ENB:OPENAIR RRC IN....
  249. [ENB_APP]   START MAIN THREADS
  250. RC.nb_L1_inst:1
  251. Initializing eNB threads single_thread_flag:0 wait_for_sync:0
  252. [PHY]   [lte-softmodem.c] eNB structure about to allocated RC.nb_L1_inst:1 RC.nb_L1_CC[0]:1
  253. [PHY]   [lte-softmodem.c] eNB structure RC.eNB allocated
  254. [PHY]   Initializing eNB 0 CC_id 0 single_thread_flag:0
  255. [PHY]   Initializing eNB 0 CC_id 0
  256. [PHY]   Registering with MAC interface module
  257. [PHY]   Setting indication lists
  258. [PHY]   [lte-softmodem.c] eNB structure allocated
  259. wait_eNBs()
  260. Waiting for eNB L1 instances to all get configured ... sleeping 50ms (nb_L1_inst 1)
  261. RC.nb_L1_CC[0]:1
  262. eNB L1 are configured
  263. About to Init RU threads RC.nb_RU:1
  264. Initializing RU threads
  265. [PHY]   DJP - delete code above this /home/oai/openairinterface5g/targets/RT/USER/lte-ru.c:2744
  266. [PHY]   Copying frame parms from eNB 0 to ru 0
  267. [PHY]   Initializing RRU descriptor 0 : (local RF,synch_to_ext_device,0)
  268. configuring ru_id 0 (start_rf 0x5b21d0)
  269. [PHY]   Starting ru_thread 0, is_slave 0, send_dmrs 0
  270. [PHY]   Initializing RU proc 0 (eNodeB_3GPP,synch_to_ext_device),
  271. [PHY]   init_RU_proc() DJP - added creation of pthread_prach
  272. [HW]   thread_top_init() called with affinity>0, but overruled by #ifndef CPU_AFFINITY.
  273. [HW]   [SCHED][eNB] ru_thread started on CPU 6, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  274. channel 0, Setting tx_gain offset 0.000000, rx_gain offset 110.000000, tx_freq 860000000.000000, rx_freq 815000000.000000
  275. [PHY]   Initializing frame parms for N_RB_DL 50, Ncp 0, osf 1
  276. [PHY]   lte_parms.c: Setting N_RB_DL to 50, ofdm_symbol_size 1024
  277. [PHY]   thread ru created id=2145
  278. [PHY]   Starting RU 0 (eNodeB_3GPP,synch_to_ext_device),
  279. waiting for sync (ru_thread,-1/0x10949a8,0x1883f60,0x1769ce0)
  280. [HW]   thread_top_init() called with affinity>0, but overruled by #ifndef CPU_AFFINITY.
  281. [HW]   [SCHED][eNB] ru_thread_prach started on CPU 6, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  282. [PHY]   Initializing RU signal buffers (if_south local RF) nb_tx 1
  283. [PHY]   ru_thread_prach() RU configured - RACH processing thread running
  284. [PHY]   [INIT] common.txdata[0] = 0x7f6a31e26040 (614400 bytes)
  285. [PHY]   nb_tx 1
  286. [PHY]   rxdata_7_5kHz[0] 0x7f6a2c41e040 for RU 0
  287. [PHY]   [INIT] common.txdata_BF= 0x2871860 (8 bytes)
  288. [PHY]   txdataF_BF[0] 0x28c2520 for RU 0
  289. [PHY]   rxdataF[0] 0x28d05a0 for RU 0
  290. [LIBCONFIG] device.recplay: 7/7 parameters successfully set, (7 to default value)
  291. [LIBCONFIG] device: 1/1 parameters successfully set, (1 to default value)
  292. [LIBCONFIG] loader.oai_device: 2/2 parameters successfully set, (1 to default value)
  293. [LOADER] library liboai_device.so successfully loaded
  294. LMSSDR: Initializing openair0_device for RAU ...
  295. cal 0: freq 3500000000.000000, offset 44.000000, diff 2685000000.000000
  296. cal 1: freq 2660000000.000000, offset 55.000000, diff 1845000000.000000
  297. cal 2: freq 2300000000.000000, offset 54.000000, diff 1485000000.000000
  298. cal 3: freq 1880000000.000000, offset 54.000000, diff 1065000000.000000
  299. cal 4: freq 816000000.000000, offset 79.000000, diff 1000000.000000
  300. [HW]   [RAU] has loaded LMSSDR device.
  301. setup_RU_buffers: frame_parms = 0x7f6a2f30aca8
  302. [PHY]   Signaling main thread that RU 0 (is_slave 0,send_dmrs 0) is ready in state RU_RUN
  303. wait RUs
  304. [ENB_APP]   Waiting for RUs to be configured ... RC.ru_mask:00
  305. [PHY]   RUs configured
  306. [ENB_APP]   RC.nb_RU:1
  307. ALL RUs ready - init eNBs
  308. [ENB_APP]   Not NFAPI mode - call init_eNB_afterRU()
  309. [PHY]   init_eNB_afterRU() RC.nb_inst:1
  310. [PHY]   RC.nb_CC[inst]:1
  311. [PHY]   RC.nb_CC[inst:0][CC_id:0]:0x7f6a2f30a010
  312. [PHY]   [eNB 0] phy_init_lte_eNB() About to wait for eNB to be configured[PHY]   [eNB 0] Initializing DL_FRAME_PARMS : N_RB_DL 50, PHICH Resource 1, PHICH Duration 0 nb_antennas_tx:0 nb_antennas_rx:1 nb_antenna_ports_eNB:1 PRACH[rootSequenceIndex:0 prach_Config_enabled:1 configIndex:0 highSpeed:0 zeroCorrelationZoneConfig:1 freqOffset:2]
  313. [PHY]   [eNB 0] Initializing DL_FRAME_PARMS : N_RB_DL 50, PHICH Resource 1, PHICH Duration 0
  314. pcfich_reg : 0,25,50,75
  315. [PHY]   [INIT] NB_ANTENNA_PORTS_ENB:6 fp->nb_antenna_ports_eNB:1
  316. [PHY]   [INIT] common_vars->txdataF[0] = 0x7f6a2c0d6040 (573440 bytes)
  317. [PHY]   [INIT] common_vars->txdataF[5] = 0x7f6a2c049040 (573440 bytes)
  318. [PHY]   Mapping RX ports from 1 RUs to eNB 0
  319. [PHY]   Overwriting eNB->prach_vars.rxsigF[0]:0x30fb100
  320. [PHY]   Overwriting eNB->prach_vars_br.rxsigF.rxsigF[0]:(nil)
  321. [PHY]   Overwriting eNB->prach_vars_br.rxsigF.rxsigF[0]:(nil)
  322. [PHY]   Overwriting eNB->prach_vars_br.rxsigF.rxsigF[0]:(nil)
  323. [PHY]   Overwriting eNB->prach_vars_br.rxsigF.rxsigF[0]:(nil)
  324. [PHY]   eNB->num_RU:1
  325. [PHY]   Attaching RU 0 antenna 0 to eNB antenna 0
  326. [PHY]   init_eNB_afterRU() ************* DJP ***** eNB->frame_parms.nb_antennas_tx:0 - GOING TO HARD CODE TO 1[PHY]   inst 0, CC_id 0 : nb_antennas_rx 1
  327. [PHY]   Initialise transport
  328. [PHY]   init_eNB_proc(inst:0) RC.nb_CC[inst]:1
  329. [PHY]   Initializing eNB processes instance:0 CC_id 0
  330. [PHY]   eNB->single_thread_flag:0
  331. [HW]   thread_top_init() called with affinity>0, but overruled by #ifndef CPU_AFFINITY.
  332. [HW]   [SCHED][eNB] eNB_thread_prach started on CPU 6, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  333. [ENB_APP]   ALL RUs ready - ALL eNBs ready
  334. [HW]   thread_top_init() called with affinity>0, but overruled by #ifndef CPU_AFFINITY.
  335. [HW]   [SCHED][eNB] eNB_thread_prach_br started on CPU 5, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  336. [ENB_APP]   Sending sync to all threads
  337. [MME_APP]   Creating MME_APP eNB Task
  338. got sync (ru_thread)
  339. [TMR]   Created Posix thread TASK_MME_APP
  340. [LIBCONFIG] MMEs.[0]: 1/1 parameters successfully set, (1 to default value)
  341. [MCE_APP]   Creating MCE_APP eNB Task
  342. [TMR]   Created Posix thread TASK_MCE_APP
  343. [LIBCONFIG] MCEs.[0]: 1/1 parameters successfully set, (1 to default value)
  344. [LIBCONFIG] MCEs.[0]: 1/1 parameters successfully set, (1 to default value)
  345. [ENB_APP]   TYPE <CTRL-C> TO TERMINATE
  346. [ENB_APP]   [MCE 0] MCE_app_register via M3AP for instance 0
  347. Connecting to device: LimeSDR Mini, media=USB 3.0, module=FT601, addr=24607:1027, serial=1D538AB1512349
  348. Reference clock 40.00 MHz
  349. SetFrequencySXR(1755 MHz) - cannot deliver frequency
  350. SetFrequencySXT(1850 MHz) - cannot deliver frequency
  351. TuneVCO(CGEN) - failed to lock (cmphl!=0)
  352. SetPllFrequency: error configuring phase
  353. SetPllFrequency: error configuring phase
  354. SetPllFrequency: error configuring phase
  355. SetPllFrequency: error configuring phase
  356. SetPllFrequency: error configuring phase
  357. SetPllFrequency: error configuring phase
  358. Set sample rate 15.360000 MHz
  359. SetFrequencySXR(815 MHz) - cannot deliver frequency
  360. Failed to Set Rx frequency: SetFrequencySXR(815 MHz) - cannot deliver frequency
  361. [HW]   Could not start the RF device
  362. [PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  363. [PHY]   problem receiving samples[MAC]   SCHED_MODE = 0
  364. [PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  365. [PHY]   rx_rf: rfdevice timing drift of 4294951936 samples (ts_off 0)
  366. [PHY]   problem receiving samples[PHY]   prach_I0 = 0.0 dB
  367. [PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  368. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294951936)
  369. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  370. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294936576)
  371. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  372. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294921216)
  373. [PHY]   problem receiving samples[PHY]   max_I0 0, min_I0 0
  374. [PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  375. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294905856)
  376. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  377. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294890496)
  378. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  379. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294875136)
  380. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  381. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294859776)
  382. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  383. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294844416)
  384. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  385. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294829056)
  386. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  387. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294813696)
  388. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  389. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294798336)
  390. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  391. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294782976)
  392. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  393. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294767616)
  394. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  395. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294752256)
  396. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  397. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294736896)
  398. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  399. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294721536)
  400. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  401. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294706176)
  402. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  403. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294690816)
  404. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  405. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294675456)
  406. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  407. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294660096)
  408. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  409. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294644736)
  410. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  411. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294629376)
  412. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  413. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294614016)
  414. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  415. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294598656)
  416. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  417. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294583296)
  418. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  419. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294567936)
  420. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  421. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294552576)
  422. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  423. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294537216)
  424. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  425. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294521856)
  426. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  427. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294506496)
  428. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  429. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294491136)
  430. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  431. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294475776)
  432. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  433. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294460416)
  434. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  435. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294445056)
  436. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  437. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294429696)
  438. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  439. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294414336)
  440. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  441. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294398976)
  442. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  443. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294383616)
  444. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  445. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294368256)
  446. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  447. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294352896)
  448. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  449. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294337536)
  450. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  451. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294322176)
  452. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  453. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294306816)
  454. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  455. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294291456)
  456. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  457. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294276096)
  458. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  459. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294260736)
  460. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  461. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294245376)
  462. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  463. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294230016)
  464. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  465. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294214656)
  466. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  467. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294199296)
  468. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  469. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294183936)
  470. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  471. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294168576)
  472. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  473. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294153216)
  474. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  475. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294137856)
  476. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  477. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294122496)
  478. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  479. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294107136)
  480. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  481. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294091776)
  482. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  483. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294076416)
  484. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  485. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294061056)
  486. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  487. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294045696)
  488. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  489. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294030336)
  490. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  491. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4294014976)
  492. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  493. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293999616)
  494. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  495. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293984256)
  496. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  497. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293968896)
  498. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  499. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293953536)
  500. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  501. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293938176)
  502. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  503. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293922816)
  504. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  505. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293907456)
  506. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  507. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293892096)
  508. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  509. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293876736)
  510. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  511. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293861376)
  512. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  513. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293846016)
  514. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  515. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293830656)
  516. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  517. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293815296)
  518. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  519. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293799936)
  520. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
  521. [PHY]   rx_rf: rfdevice timing drift of -15360 samples (ts_off 4293784576)
  522. [PHY]   problem receiving samples[PHY]   rx_rf: Asked for 15360 samples, got -1 from SDR
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!