Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ##### release ###########################
- Distributor ID: Debian
- Description: Debian GNU/Linux 9.5 (stretch)
- Release: 9.5
- Codename: stretch
- ##### kernel ############################
- Linux 4.9.0-7-amd64 #1 SMP Debian 4.9.110-1 (2018-07-05) x86_64 unknown unknown GNU/Linux
- Parameters: ro, quiet
- ##### lsusb #############################
- Bus 002 Device 004: ID 0b05:17ab ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter (rev. B1) [Realtek RTL8192CU]
- ##### lsmod #############################
- rtl8192cu 69632 0
- rtl_usb 20480 1 rtl8192cu
- asus_nb_wmi 28672 0
- ath3k 20480 0
- asus_wmi 28672 1 asus_nb_wmi
- rtl8192c_common 53248 1 rtl8192cu
- rtlwifi 77824 3 rtl_usb,rtl8192c_common,rtl8192cu
- ath9k 94208 0
- sparse_keymap 16384 1 asus_wmi
- ath9k_common 32768 1 ath9k
- bluetooth 552960 32 btrtl,btintel,bnep,btbcm,rfcomm,ath3k,btusb
- ath9k_hw 458752 2 ath9k,ath9k_common
- ath 32768 3 ath9k_hw,ath9k,ath9k_common
- mxm_wmi 16384 1 nouveau
- mac80211 671744 4 rtl_usb,ath9k,rtlwifi,rtl8192cu
- cfg80211 589824 5 mac80211,ath9k,ath,rtlwifi,ath9k_common
- rfkill 24576 8 asus_wmi,bluetooth,cfg80211
- video 40960 2 asus_wmi,nouveau
- wmi 16384 3 asus_wmi,mxm_wmi,nouveau
- usbcore 253952 13 uvcvideo,usbhid,usb_storage,ehci_hcd,rtl_usb,xhci_pci,rtsx_usb,ath3k,btusb,uas,rtl8192cu,xhci_hcd,ehci_pci
- ##### interfaces ########################
- [/etc/network/interfaces]
- source /etc/network/interfaces.d/*
- allow-hotplug eth0
- iface eth0 inet dhcp
- ##### ifconfig ##########################
- 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
- link/loopback <MAC address> brd 00:00:00:00:00:00
- inet 127.0.0.1/8 scope host lo
- valid_lft forever preferred_lft forever
- inet6 ::1/128 scope host
- valid_lft forever preferred_lft forever
- 2: enp5s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
- link/ether <MAC 'enp5s0' [IF1]> brd <MAC address>
- 3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
- link/ether <MAC 'wlp3s0' [IF2]> brd <MAC address>
- 4: wlx<IF from MAC [IF3]>: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
- link/ether <MAC 'wlx<IF from MAC [IF3]>' [IF3]> brd <MAC address>
- inet 192.168.1.150/24 brd 192.168.1.255 scope global dynamic wlx<IF from MAC [IF3]>
- valid_lft 84057sec preferred_lft 84057sec
- inet6 fe80::809a:562:7f61:da1e/64 scope link
- valid_lft forever preferred_lft forever
- ##### route #############################
- default via 192.168.1.1 dev wlx<IF from MAC [IF3]> proto static metric 600
- 169.254.0.0/16 dev wlx<IF from MAC [IF3]> scope link metric 1000
- 192.168.1.0/24 dev wlx<IF from MAC [IF3]> proto kernel scope link src 192.168.1.150 metric 600
- ##### NetworkManager.state ##############
- [main]
- NetworkingEnabled=true
- WirelessEnabled=true
- WWANEnabled=true
- ##### NetworkManager.conf ###############
- [main]
- plugins=ifupdown,keyfile
- [ifupdown]
- managed=true
- [device]
- wifi.scan-rand-mac-address=no
- ##### module infos ######################
- [rtl8192cu]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko
- firmware: rtlwifi/rtl8192cufw_TMSC.bin
- firmware: rtlwifi/rtl8192cufw_B.bin
- firmware: rtlwifi/rtl8192cufw_A.bin
- firmware: rtlwifi/rtl8192cufw.bin
- description: Realtek 8192C/8188C 802.11n USB wireless
- license: GPL
- author: Larry Finger <Larry.Finger@lwfinger.net>
- author: Ziv Huang <ziv_huang@realtek.com>
- author: Georgia <georgia@realtek.com>
- depends: mac80211,rtlwifi,rtl8192c-common,rtl_usb,usbcore
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- parm: swenc:Set to 1 for software crypto (default 0)
- (bool)
- parm: debug:Set debug level (0-5) (default 0) (int)
- [rtl_usb]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko
- description: USB basic driver for rtlwifi
- license: GPL
- author: Larry Finger <Larry.FInger@lwfinger.net>
- author: Realtek WlanFAE <wlanfae@realtek.com>
- author: lizhaoming <chaoming_li@realsil.com.cn>
- depends: mac80211,rtlwifi,usbcore
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- [rtl8192c_common]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko
- description: Realtek 8192C/8188C 802.11n PCI wireless
- license: GPL
- author: Larry Finger <Larry.Finger@lwfinger.net>
- author: Ziv Huang <ziv_huang@realtek.com>
- author: Georgia <georgia@realtek.com>
- author: Realtek WlanFAE <wlanfae@realtek.com>
- author: lizhaoming <chaoming_li@realsil.com.cn>
- depends: rtlwifi
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- [ath9k]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
- license: Dual BSD/GPL
- description: Support for Atheros 802.11n wireless LAN cards.
- author: Atheros Communications
- depends: mac80211,ath9k_hw,ath9k_common,cfg80211,ath
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- parm: debug:Debugging mask (uint)
- parm: nohwcrypt:Disable hardware encryption (int)
- parm: blink:Enable LED blink on activity (int)
- parm: led_active_high:Invert LED polarity (int)
- parm: btcoex_enable:Enable wifi-BT coexistence (int)
- parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int)
- parm: ps_enable:Enable WLAN PowerSave (int)
- [ath9k_common]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko
- license: Dual BSD/GPL
- description: Shared library for Atheros wireless 802.11n LAN cards.
- author: Atheros Communications
- depends: ath9k_hw,cfg80211,ath
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- [rtlwifi]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko
- description: Realtek 802.11n PCI wireless core
- license: GPL
- author: Larry Finger <Larry.FInger@lwfinger.net>
- author: Realtek WlanFAE <wlanfae@realtek.com>
- author: lizhaoming <chaoming_li@realsil.com.cn>
- depends: mac80211,cfg80211
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- [ath9k_hw]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
- license: Dual BSD/GPL
- description: Support for Atheros 802.11n wireless LAN cards.
- author: Atheros Communications
- depends: ath
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- [ath]
- filename: /lib/modules/4.9.0-7-amd64/kernel/drivers/net/wireless/ath/ath.ko
- license: Dual BSD/GPL
- description: Shared library for Atheros wireless LAN cards.
- author: Atheros Communications
- depends: cfg80211
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- [mac80211]
- filename: /lib/modules/4.9.0-7-amd64/kernel/net/mac80211/mac80211.ko
- license: GPL
- description: IEEE 802.11 subsystem
- depends: cfg80211
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
- parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
- parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
- parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
- parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
- [cfg80211]
- filename: /lib/modules/4.9.0-7-amd64/kernel/net/wireless/cfg80211.ko
- description: wireless configuration support
- license: GPL
- author: Johannes Berg
- depends: rfkill
- retpoline: Y
- intree: Y
- vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
- parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
- parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
- parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
- ##### module parameters #################
- [rtl8192cu]
- debug: 0
- swenc: Y
- [ath9k]
- blink: 0
- bt_ant_diversity: 0
- btcoex_enable: 0
- led_active_high: -1
- nohwcrypt: 0
- ps_enable: 0
- [mac80211]
- beacon_loss_count: 7
- ieee80211_default_rc_algo: minstrel_ht
- max_nullfunc_tries: 2
- max_probe_tries: 5
- probe_wait_ms: 500
- [cfg80211]
- bss_entries_limit: 1000
- cfg80211_disable_40mhz_24ghz: N
- ieee80211_regdom: 00
- ##### dmesg #############################
- [ 10.854522] ath: phy0: Set BT/WLAN RX diversity capability
- [ 10.904685] ath: phy0: ASPM enabled: 0x42
- [ 10.904687] ath: EEPROM regdomain: 0x60
- [ 10.904688] ath: EEPROM indicates we should expect a direct regpair map
- [ 10.904689] ath: Country alpha2 being used: 00
- [ 10.904689] ath: Regpair used: 0x60
- [ 11.643349] rtl8192cu: Chip version 0x11
- [ 11.682674] rtl8192cu: Board Type 0
- [ 11.682751] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
- [ 11.682790] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
- [ 11.682976] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
- [ 11.779509] usb 2-1.2: firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin
- [ 13.531997] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
- [ 13.650523] rtl8192cu 2-1.2:1.0 wlx<IF from MAC [IF3]>: renamed from wlan1
- [ 20.134461] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- [ 20.170173] r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
- [ 20.339150] r8169 0000:05:00.0 enp5s0: link down
- [ 20.339240] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- [ 20.349366] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready (repeated 2 times)
- [ 20.370662] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF3]>: link is not ready
- [ 20.372310] rtl8192cu: MAC auto ON okay!
- [ 20.387260] rtl8192cu: Tx queue select: 0x05
- [ 20.799878] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF3]>: link is not ready (repeated 2 times)
- [ 21.328980] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 23.245027] wlx<IF from MAC [IF3]>: authenticate with <MAC 'MEDIACOM' [AC1]>
- [ 23.263190] wlx<IF from MAC [IF3]>: send auth to <MAC 'MEDIACOM' [AC1]> (try 1/3)
- [ 23.322407] wlx<IF from MAC [IF3]>: authenticated
- [ 23.324120] wlx<IF from MAC [IF3]>: associate with <MAC 'MEDIACOM' [AC1]> (try 1/3)
- [ 23.342955] wlx<IF from MAC [IF3]>: RX AssocResp from <MAC 'MEDIACOM' [AC1]> (capab=0x401 status=0 aid=1)
- [ 23.347789] wlx<IF from MAC [IF3]>: associated
- [ 23.347982] IPv6: ADDRCONF(NETDEV_CHANGE): wlx<IF from MAC [IF3]>: link becomes ready
- ########## wireless info END ############
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement