Advertisement
Guest User

Untitled

a guest
Feb 23rd, 2013
73
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.61 KB | None | 0 0
  1. anthony@anthony-PecanCM ~/android/workspace/Cyanogenmod-9-Weeklies/ics/kernel/lge/p350/drivers/staging $ adb shell cat /proc/kmsg
  2. <5>Linux version 2.6.32.9-PecanCM-cm10.1 (PecanCM@Jessie) (/home/anthony/android/workspace/Cyanogenmod-9-Weeklies/ics/kernel/lge/p350/scripts/mkcompile_h: line 90: /home/anthony/android/workspace/*9*/ics/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc: No such file or directory) #1 PREEMPT Sat Feb 23 14:53:04 GMT 2013
  3. <4>CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
  4. <4>CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
  5. <4>Machine: PECAN board (LGE LGP350)
  6. <6>Partition (from atag) boot -- Offset:130 Size:22
  7. <6>Partition (from atag) system -- Offset:152 Size:640
  8. <6>Partition (from atag) recovery -- Offset:792 Size:28
  9. <6>Partition (from atag) lgdrm -- Offset:7ba Size:16
  10. <6>Partition (from atag) splash -- Offset:7d0 Size:8
  11. <6>Partition (from atag) FOTABIN -- Offset:7d8 Size:8
  12. <6>Partition (from atag) FOTA -- Offset:7e0 Size:32
  13. <6>Partition (from atag) misc -- Offset:812 Size:2
  14. <6>Partition (from atag) cache -- Offset:814 Size:200
  15. <6>Partition (from atag) userdata -- Offset:a14 Size:5ec
  16. <4>Memory policy: ECC disabled, Data cache writeback
  17. <7>On node 0 totalpages: 55040
  18. <7>free_area_init_node: node 0, pgdat c071dc94, node_mem_map c0812000
  19. <7> Normal zone: 430 pages used for memmap
  20. <7> Normal zone: 0 pages reserved
  21. <7> Normal zone: 54610 pages, LIFO batch:15
  22. <6>allocating 17260544 bytes at c1032000 (3832000 physical) for mdp pmem arena
  23. <6>allocating 10346496 bytes at c20a8000 (48a8000 physical) for adsp pmem arena
  24. <6>allocating 614400 bytes at c2a86000 (5286000 physical) for fb
  25. <6>allocating 114688 bytes at c2c00000 (5400000 physical) for kernel ebi1 pmem arena
  26. <6>L210 cache controller enabled
  27. <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54610
  28. <5>Kernel command line: mem=215M console=ttyMSM2,115200n8 androidboot.hardware=pecan uart_console=disable lge.rev=rev_10 lge.hreset=off lge.reboot=reboot lge.lcd=on
  29. <6>UART CONSOLE : disable
  30. <6>BOARD: LGE rev_10
  31. <6>PID hash table entries: 1024 (order: 0, 4096 bytes)
  32. <6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  33. <6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  34. <6>Memory: 215MB = 215MB total
  35. <5>Memory: 181820KB available (6628K code, 1260K data, 156K init, 0K highmem)
  36. <6>NR_IRQS:261
  37. <4>Console: colour dummy device 80x30
  38. <6>Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
  39. <4>Mount-cache hash table entries: 512
  40. <6>CPU: Testing write buffer coherency:
  41. <1>Initialized Zero page successfully
  42. <4>ok
  43. <6>NET: Registered protocol family 16
  44. <3>smem_find(137, 64): wrong size 56
  45. <6>socinfo_init: v3, id=43, ver=1.2, raw_id=960, raw_ver=2, hw_plat=8
  46. <6>acpu_clock_init()
  47. <6>Shared PLL control available.
  48. <6>L val: PLL0: 50, PLL1: 12, PLL2: 62
  49. <6>ACPU running at 600000 KHz
  50. <6>Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
  51. <6> 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
  52. <6> 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
  53. <6> 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
  54. <6> 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
  55. <6> 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
  56. <6> 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
  57. <6> 6 400000 2 3 133333 3 160000 5 4 3 9 -1 8
  58. <6> 7 480000 0 2 160000 3 160000 5 4 6 13 -1 8
  59. <6> 8 600000 2 2 200000 3 200000 7 -1 6 19 -1 -1
  60. <6> 9 652800 0 1 326400 2 200000 7 -1 6 19 -1 -1
  61. <6>10 672000 0 1 336000 2 200000 7 -1 8 19 -1 -1
  62. <6>11 691200 0 1 345600 2 200000 7 -1 8 19 -1 -1
  63. <6>12 710400 0 1 355200 2 200000 7 -1 8 19 -1 -1
  64. <6>13 729600 0 1 364800 2 200000 7 -1 8 19 -1 -1
  65. <6>14 748800 0 1 374400 2 200000 9 -1 8 19 -1 -1
  66. <6>15 768000 0 1 384000 2 200000 9 -1 8 19 -1 -1
  67. <6>16 787200 0 1 393600 2 200000 9 -1 8 19 -1 -1
  68. <6>17 806400 0 1 403200 2 200000 9 -1 8 19 -1 -1
  69. <6>18 825600 0 1 412800 2 200000 9 -1 8 19 -1 -1
  70. <6>19 844800 0 1 422400 2 200000 9 -1 8 -1 -1 -1
  71. <6>16 scaling frequencies supported.
  72. <4>FB START PHYS ADDR : ff40000
  73. <4>FB START VIRT ADDR : cd840000
  74. <4>FB SIZE : 25800
  75. <4>RAM CONSOLE START ADDR : 267386880
  76. <4>RAM CONSOLE END ADDR : 267649023
  77. <6>ram_console: got buffer at ff00000, size 40000
  78. <6>ram_console: found existing buffer, size 30550, start 30550
  79. <6>console [ram-1] enabled
  80. <4>bio: create slab <bio-0> at 0
  81. <5>SCSI subsystem initialized
  82. <6>msm_i2c_probe
  83. <6>msm_i2c_probe: clk_ctl 315, 400000 Hz
  84. <6>Bluetooth: Core ver 2.15
  85. <6>NET: Registered protocol family 31
  86. <6>Bluetooth: HCI device and connection manager initialized
  87. <6>Bluetooth: HCI socket layer initialized
  88. <6>Switching to clocksource dg_timer
  89. <6>NET: Registered protocol family 2
  90. <6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  91. <6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  92. <6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  93. <6>TCP: Hash tables configured (established 8192 bind 8192)
  94. <6>TCP reno registered
  95. <6>NET: Registered protocol family 1
  96. <6>RPC: Registered udp transport module.
  97. <6>RPC: Registered tcp transport module.
  98. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  99. <6>Trying to unpack rootfs image as initramfs...
  100. <6>Freeing initrd memory: 164K
  101. <6>smd probe
  102. <6>smd_core_init()
  103. <6>smd_core_init() done
  104. <6>smd_alloc_loopback_channel: 'local_loopback' cid=100
  105. <6>smd_alloc_channel() 'DS' cid=0
  106. <3>Notify: smsm init
  107. <6>smd_alloc_channel() 'DIAG' cid=1
  108. <6>smd_alloc_channel() 'RPCCALL' cid=2
  109. <6>smd_alloc_channel() 'DATA1' cid=7
  110. <6>smd_alloc_channel() 'DATA2' cid=8
  111. <6>smd_alloc_channel() 'DATA3' cid=9
  112. <6>smd_alloc_channel() 'DATA4' cid=10
  113. <6>smd_alloc_channel() 'DATA5' cid=11
  114. <6>smd_alloc_channel() 'DATA6' cid=12
  115. <6>smd_alloc_channel() 'DATA7' cid=13
  116. <6>smd_alloc_channel() 'DATA11' cid=17
  117. <6>smd_alloc_channel() 'DAL00' cid=38
  118. <6>smd_alloc_channel() 'DATA5_CNTL' cid=39
  119. <6>smd_alloc_channel() 'DATA6_CNTL' cid=40
  120. <6>smd_alloc_channel() 'DATA7_CNTL' cid=41
  121. <6>SMD Packet Port Driver Initialized.
  122. <6>SMD: ch 2 0 -> 1
  123. <6>SMD: ch 2 1 -> 2
  124. <6>[adsp.c:adsp_init] rs3000000a -- 0
  125. <6>[audpp.c:audpp_probe] Number of decoder supported 5
  126. <6>[audpp.c:audpp_probe] Number of concurrency supported 7
  127. <6>[audpp.c:audpp_probe] module_name:AUDPLAY0TASK
  128. <6>[audpp.c:audpp_probe] queueid:13
  129. <6>[audpp.c:audpp_probe] decid:0
  130. <6>[audpp.c:audpp_probe] nr_codec_support:11
  131. <6>[audpp.c:audpp_probe] module_name:AUDPLAY1TASK
  132. <6>[audpp.c:audpp_probe] queueid:14
  133. <6>[audpp.c:audpp_probe] decid:1
  134. <6>[audpp.c:audpp_probe] nr_codec_support:5
  135. <6>[audpp.c:audpp_probe] module_name:AUDPLAY2TASK
  136. <6>[audpp.c:audpp_probe] queueid:15
  137. <6>[audpp.c:audpp_probe] decid:2
  138. <6>[audpp.c:audpp_probe] nr_codec_support:5
  139. <6>[audpp.c:audpp_probe] module_name:AUDPLAY3TASK
  140. <6>[audpp.c:audpp_probe] queueid:16
  141. <6>[audpp.c:audpp_probe] decid:3
  142. <6>[audpp.c:audpp_probe] nr_codec_support:4
  143. <6>[audpp.c:audpp_probe] module_name:AUDPLAY4TASK
  144. <6>[audpp.c:audpp_probe] queueid:17
  145. <6>[audpp.c:audpp_probe] decid:4
  146. <6>[audpp.c:audpp_probe] nr_codec_support:1
  147. <6>pecan_gpio_earsense_work_func: ear sense detected : ejected
  148. <6>__msm_rpc_connect: server not found 30000061:30001
  149. <6>__msm_rpc_connect: server not found 30000061:20001
  150. <6>RPC_TIME_TOD_SET_APPS_BASES:
  151. <6> tick = 117729
  152. <6> stamp = 808464432
  153. <4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  154. <4>send success
  155. <4>[Blue Debug] lge_error_handler_init
  156. <4>lge_tempdevice_init
  157. <6>lge_mtd_direct_access_init: finished
  158. <6>LGE Power Sink Driver Init
  159. <6>lge_pwrsink_probe: setting driver data
  160. <6>ashmem: initialized
  161. <5>VFS: Disk quotas dquot_6.5.2
  162. <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  163. <7>yaffs built Feb 23 2013 14:52:30 Installing.
  164. <6>msgmni has been set to 356
  165. <6>pecan_gpio_earsense_work_func: ear sense detected : ejected
  166. <4>send success
  167. <6>alg: No test for stdrng (krng)
  168. <6>io scheduler noop registered
  169. <6>io scheduler cfq registered
  170. <6>io scheduler bfq registered
  171. <6>io scheduler anticipatory registered
  172. <6>io scheduler deadline registered
  173. <6>io scheduler sio registered (default)
  174. <6>io scheduler vr registered
  175. <4>AAT28XX init start
  176. <3>msm_ion_client_create() return error, val ffffffed
  177. <3>mdp request_irq() failed!
  178. <4>mdp: probe of mdp.0 failed with error -22
  179. <4>kurze-LCD is Ilitek (No END Key Pressed!)
  180. <6>setting pdata->panel_info.fb_num to 3. type: 2
  181. <4>mdp: probe of mdp.131073 failed with error -1
  182. <6>diagfwd initializing ..
  183. <6>SMD: ch 1 0 -> 1
  184. <6>diag opened SMD port ; r = 0
  185. <6>SMD: ch 1 1 -> 2
  186. <6>diagchar initializing ..
  187. <6>diagchar initialized
  188. <6>kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  189. <6>msm_serial: driver initialized
  190. <6>msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
  191. <6>msm_serial_hs module loaded
  192. <6>brd: module loaded
  193. <6>loop: module loaded
  194. <6>pmem: Initializing pmem_kernel_ebi1 (in-kernel)
  195. <6>pmem: Initializing pmem (user-space) as cached
  196. <6>pmem: Initializing pmem_adsp (user-space) as non-cached
  197. <6>LGE: Android Vibrator Driver Init
  198. <6>LGE: Android Vibrator Initialization was done
  199. <4>atcmd_probe:alohag_atcmd
  200. <6>SCSI Media Changer driver v0.25
  201. <6>msm_nand_probe: phys addr 0xa0a00000
  202. <6>msm_nand_probe: dmac 0x7
  203. <6>msm_nand_probe: allocated dma buffer at ffc56000, dma_addr faa4000
  204. <6>status: c00020
  205. <6>nandid: 5590bc2c maker 2c device bc
  206. <6>ONFI probe : Found an ONFI compliant device MT29F4G16ABBDA3W ,
  207. <6>Found a supported NAND device
  208. <6>NAND Id : 0x5590bc2c
  209. <6>Buswidth : 16 Bits
  210. <6>Density : 512 MByte
  211. <6>Pagesize : 2048 Bytes
  212. <6>Erasesize: 131072 Bytes
  213. <6>Oobsize : 64 Bytes
  214. <6>CFG0 Init : 0xa85408c0
  215. <6>CFG1 Init : 0x0004745e
  216. <6>ECCBUFCFG : 0x00000203
  217. <5>Creating 10 MTD partitions on "msm_nand":
  218. <5>0x000002600000-0x000002a40000 : "boot"
  219. <5>0x000002a40000-0x00000f240000 : "system"
  220. <5>0x00000f240000-0x00000f740000 : "recovery"
  221. <5>0x00000f740000-0x00000fa00000 : "lgdrm"
  222. <5>0x00000fa00000-0x00000fb00000 : "splash"
  223. <5>0x00000fb00000-0x00000fc00000 : "FOTABIN"
  224. <5>0x00000fc00000-0x000010240000 : "FOTA"
  225. <5>0x000010240000-0x000010280000 : "misc"
  226. <5>0x000010280000-0x000014280000 : "cache"
  227. <5>0x000014280000-0x000020000000 : "userdata"
  228. <6>PPP generic driver version 2.4.2
  229. <6>PPP Deflate Compression module registered
  230. <6>PPP BSD Compression module registered
  231. <6>PPP MPPE Compression module registered
  232. <6>NET: Registered protocol family 24
  233. <6>PPPoL2TP kernel driver, V1.0
  234. <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  235. <6>CSLIP: code copyright 1989 Regents of the University of California.
  236. <4>brcm_static_buf_init: initialize wifi_alloc_data
  237. <4>Section [3] initial allocation success size[139264]!!!
  238. <4>Section [2] initial allocation success size[32768]!!!
  239. <4>Section [1] initial allocation success size[12288]!!!
  240. <4>Section [0] initial allocation success size[12288]!!!
  241. <4>rmnet_init
  242. <6>msm_hsusb_rpc_connect: rpc connect success vers = 10001
  243. <6>msm_otg_probe: rpc_connect(0)
  244. <6>msm_hsusb_phy_reset
  245. <6>msm72k_probe
  246. <6>__msm_rpc_connect: server not found 3000001a:20001
  247. <6>peripheral driver registered w/ tranceiver
  248. <6>android init
  249. <6>adb_function_init
  250. <6>android_probe pdata: c06ea42c
  251. <6>android_probe : serial_number is LG_ANDROID_P350****
  252. <6>init : LGE Android Gadget USB - INIT PID is 618e
  253. <6>do_detect_factory_cable : Using PIF ZIG (0)
  254. <6>msm_nv_imei_get: msm_rpc_call success. ver = 0x60001
  255. <6>do_get_usb_serial_number : IMEI 80A356525049826379
  256. <6>do_detect_factory_cable : Using PIF ZIG (0)
  257. <6>msm_nv_imei_get: msm_rpc_call success. ver = 0x60001
  258. <6>do_get_usb_serial_number : IMEI 80A356525049826379
  259. <4>android_usb gadget: using random self ethernet address
  260. <4>android_usb gadget: using random host ethernet address
  261. <6>usb0: MAC 22:c7:f4:e1:39:9d
  262. <6>usb0: HOST MAC 52:89:60:ac:0a:8c
  263. <6>diag_function_add
  264. <6>mass_storage_function_add
  265. <6>android_usb gadget: Number of LUNs=1
  266. <6>android_usb gadget: android_usb ready
  267. <6>msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
  268. <6>msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
  269. <6>input: touch_mcs7000 as /devices/virtual/input/input0
  270. <6>GPIO Matrix Keypad Driver: Start keypad matrix for pecan_keypad in interrupt mode
  271. <6>input: pecan_keypad as /devices/virtual/input/input1
  272. <6>KR3DM accelerometer driver
  273. <6>KR3DH accelerometer driver
  274. <6>msm_hsusb_phy_reset
  275. <7>RTC Registering with rs30000048
  276. <3>msm_rpc_client_req: RPC call was not successful (3)
  277. <7>msmrtc_setup_cb: RPC client registration for PROC:12 failed
  278. <7>msmrtc_probe: Could not initialize RPC callback
  279. <6>using rtc device, msm_rtc, for alarms
  280. <7>msm_rtc: dev (254:0)
  281. <6>rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
  282. <7>msm_rtc_secure: dev (254:1)
  283. <6>rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
  284. <6>i2c /dev entries driver
  285. <6>Registered led device: lcd-backlight
  286. <3>aat2870bl:aat28xx_probe: Registering led class dev successfully.
  287. <3>aat2870bl:aat28xx_probe: done
  288. <6>i2c-gpio i2c-gpio.2: using pins 89 (SDA) and 88 (SCL)
  289. <4>[Touch] ts_set_vreg() onoff:0
  290. <4>[Touch] ts_set_vreg() onoff:1
  291. <6>msm_hsusb msm_hsusb: suspend
  292. <6>msm_hsusb msm_hsusb: reset
  293. <6>msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  294. <6>MCS7000 F/W Version [0xf]
  295. <6>MCS7000 H/W Revision [0x11]
  296. <6>i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
  297. <4>[Ecompass] ecom_power_set() : Power On
  298. <6>ami304_sensor 4-000f: force operating mode
  299. <6>Register input device!
  300. <6>input: Acompass as /devices/virtual/input/input2
  301. <6>i2c-gpio i2c-gpio.4: using pins 108 (SDA) and 107 (SCL)
  302. <4>[Accelerometer] accel_power_on() : Power On
  303. <6>input: accelerometer as /devices/virtual/input/input3
  304. <6>input: lge_gesture as /devices/virtual/input/input4
  305. <6>KR3DH 5-0019: KR3DH kr3dh: Accelerometer chip found
  306. <6>i2c-gpio i2c-gpio.5: using pins 3 (SDA) and 2 (SCL)
  307. <6>Linux video capture interface: v2.00
  308. <7>msm_batt_init: enter
  309. <6>__msm_rpc_connect: server not found 3000001a:20002
  310. <7>msm_batt_get_charger_api_version: num_of_chg_api_versions = 3. The chg api version = 0x00010003
  311. <6>__msm_rpc_connect: server not found 30000089:20001
  312. <7>msm_batt_register: got handle = 2
  313. <7>msm_batt_enable_filter: enable vbatt filter: OK
  314. <6>msm-battery msm-battery: msm_batt_probe : Using PIF ZIG (0)
  315. <6>msm_batt_init: Charger/Battery = 0x00010003/0x00010001 (RPC version)
  316. <6>device-mapper: uevent: version 1.0.3
  317. <6>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  318. <6>Bluetooth: HCI UART driver ver 2.2
  319. <6>Bluetooth: HCI H4 protocol initialized
  320. <6>Bluetooth: HCI BCSP protocol initialized
  321. <6>Bluetooth: MSM Sleep Mode Driver Ver 1.1
  322. <7>bluetooth_power_init
  323. <7>bt_power_probe
  324. <6>[imoseyon] ondemandx enter
  325. <6>[imoseyon] interactiveX enter
  326. <6>[imoseyon] brazilianwax enter
  327. <6>cpuidle: using governor ladder
  328. <6>cpuidle: using governor menu
  329. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  330. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  331. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  332. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  333. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  334. <6>[LGE] msmsdcc_check_status (last status): old status - 1, current status - 1
  335. <6>mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
  336. <6>mmc0: 8 bit data mode disabled
  337. <6>mmc0: 4 bit data mode enabled
  338. <6>mmc0: polling status mode disabled
  339. <6>mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
  340. <6>mmc0: Slot eject status = 0
  341. <6>mmc0: Power save feature enable = 1
  342. <6>mmc0: DM non-cached buffer at ffc5a000, dma_addr 0x0fb98000
  343. <6>mmc0: DM cmd busaddr 0x0fb98000, cmdptr busaddr 0x0fb98300
  344. <3>bcm432x_sdcc_wlan_slot_status: 93 0
  345. <6>[LGE] mmc1 - wifi is detected
  346. <3>bcm432x_sdcc_wlan_slot_status: 93 0
  347. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  348. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  349. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  350. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  351. <6>[LGE] msmsdcc_check_status: old status - 1, current status - 1
  352. <6>[LGE] msmsdcc_check_status (last status): old status - 1, current status - 1
  353. <6>msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  354. <6>msm_hsusb msm_hsusb: reset
  355. <6>mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,157 dma 8
  356. <6>mmc1: 8 bit data mode disabled
  357. <6>mmc1: 4 bit data mode enabled
  358. <6>mmc1: polling status mode disabled
  359. <6>mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
  360. <6>mmc1: Slot eject status = 1
  361. <6>mmc1: Power save feature enable = 1
  362. <6>mmc1: DM non-cached buffer at ffc5b000, dma_addr 0x0fb9a000
  363. <6>mmc1: DM cmd busaddr 0x0fb9a000, cmdptr busaddr 0x0fb9a300
  364. <6>Registered led device: button-backlight
  365. <6>logger: created 256K log 'log_main'
  366. <6>logger: created 256K log 'log_events'
  367. <6>logger: created 256K log 'log_radio'
  368. <6>logger: created 256K log 'log_system'
  369. <6>zram: Creating 1 devices ...
  370. <6>Advanced Linux Sound Architecture Driver Version 1.0.21.
  371. <4>No device for DAI CODEC_DAI
  372. <4>No device for DAI CPU_DAI
  373. <3>msm_soc: create pcms
  374. <6>asoc: CODEC_DAI <-> CPU_DAI mapping ok
  375. <3>msm_soc: ALSA MSM Mixer Setting
  376. <6>ALSA device list:
  377. <6> #0: msm-audio (MSM-CARD)
  378. <4>u32 classifier
  379. <4>Netfilter messages via NETLINK v0.30.
  380. <4>nf_conntrack version 0.5.0 (2848 buckets, 11392 max)
  381. <4>ctnetlink v0.93: registering with nfnetlink.
  382. <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  383. <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  384. <6>xt_time: kernel timezone is -0000
  385. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  386. <6>arp_tables: (C) 2002 David S. Miller
  387. <6>TCP cubic registered
  388. <6>Initializing XFRM netlink socket
  389. <6>NET: Registered protocol family 10
  390. <6>lo: Disabled Privacy Extensions
  391. <6>Mobile IPv6
  392. <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  393. <6>IPv6 over IPv4 tunneling driver
  394. <6>sit0: Disabled Privacy Extensions
  395. <6>ip6tnl0: Disabled Privacy Extensions
  396. <6>NET: Registered protocol family 17
  397. <6>NET: Registered protocol family 15
  398. <6>Bluetooth: L2CAP ver 2.14
  399. <6>Bluetooth: L2CAP socket layer initialized
  400. <6>Bluetooth: SCO (Voice Link) ver 0.6
  401. <6>Bluetooth: SCO socket layer initialized
  402. <6>Bluetooth: RFCOMM TTY layer initialized
  403. <6>Bluetooth: RFCOMM socket layer initialized
  404. <6>Bluetooth: RFCOMM ver 1.11
  405. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  406. <6>Bluetooth: BNEP filters: protocol multicast
  407. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  408. <6>clock_late_init() disabled 17 unused clocks
  409. <6>input: 7k_handset as /devices/virtual/input/input5
  410. <6>__msm_rpc_connect: server not found 30000091:30001
  411. <3>msm_rpc_client_req: RPC call was not successful (4)
  412. <3>hs_rpc_cb_init: RPC client request failed for pwr key delay cmd, using normal mode
  413. <6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  414. <7>msmrtc_tod_proc_result: 02/23/2013 15:12:24 (05)
  415. <6>rs30000048 rs30000048.65536: setting system clock to 2013-02-23 15:12:24 UTC (1361632344)
  416. <6>msm_v4l2: msm_v4l2_init
  417. <6>Freeing init memory: 156K
  418. <6>CFS CPU scheduler.
  419. <4>Warning: unable to open an initial console.
  420. <6>android_usb gadget: high speed config #1: android
  421. <7>diag: USB connected
  422. <3>init: could not import file /system/etc/init.local.rc
  423. <4>mmc0: host does not support reading read-only switch. assuming write-enable.
  424. <6>mmc0: new high speed SDHC card at address 1234
  425. <6>mmcblk0: mmc0:1234 SA08G 7.28 GiB
  426. <6>mmcblk0: detected capacity change from 0 to 7822376960
  427. <6> mmcblk0: p1
  428. <6>[LGE] mmc1 - wifi is detected
  429. <3>bcm432x_sdcc_wlan_slot_status: 93 0
  430. <6>keychord: using input dev touch_mcs7000 for fevent
  431. <6>keychord: using input dev pecan_keypad for fevent
  432. <6>keychord: using input dev 7k_handset for fevent
  433. <6>android_set_pid : Requested product id is same(618e), ignore it
  434. <6>yaffs: dev is 32505857 name is "mtdblock1" rw
  435. <6>yaffs: passed flags ""
  436. <7>yaffs: Attempting MTD mount of 31.1,"mtdblock1"
  437. <6>do_detect_factory_cable : Using PIF ZIG (0)
  438. <6>
  439. <6>Charger Type: STD DOWNSTREAM PORT
  440. <7>yaffs_read_super: isCheckpointed 0
  441. <7>save exit: isCheckpointed 1
  442. <6>yaffs: dev is 32505865 name is "mtdblock9" rw
  443. <6>yaffs: passed flags ""
  444. <7>yaffs: Attempting MTD mount of 31.9,"mtdblock9"
  445. <7>yaffs_read_super: isCheckpointed 0
  446. <6>yaffs: dev is 32505864 name is "mtdblock8" rw
  447. <6>yaffs: passed flags ""
  448. <7>yaffs: Attempting MTD mount of 31.8,"mtdblock8"
  449. <7>yaffs_read_super: isCheckpointed 0
  450. <6>SMD: ch 39 0 -> 1
  451. <6>SMD: ch 39 1 -> 2
  452. <6>SMD: ch 40 0 -> 1
  453. <6>SMD: ch 40 1 -> 2
  454. <6>SMD: ch 41 0 -> 1
  455. <6>SMD: ch 41 1 -> 2
  456. <6>adb_enable_open: enabling adb - 618e
  457. <4>freeing IRQ
  458. <7>pecan_bluetooth_power
  459. <4>pecan_bluetooth_power 0
  460. <3>init: service 'console' requires console
  461. <6>diag_function_disable
  462. <7>diag: USB disconnected
  463. <3>Packet dropped due to bad HDLC coding/CRC errors or partial packet received, packet length = 0
  464. <6>msm_hsusb msm_hsusb: unregistered gadget driver 'android_usb'
  465. <6>do_detect_factory_cable : Using PIF ZIG (0)
  466. <6>msm_nv_imei_get: msm_rpc_call success. ver = 0x60001
  467. <6>do_get_usb_serial_number : IMEI 80A356525049826379
  468. <6>diag_function_add
  469. <6>mass_storage_function_add
  470. <6>android_usb gadget: Number of LUNs=1
  471. <6>android_usb gadget: adb_function_add
  472. <6>android_usb gadget: android_usb ready
  473. <6>msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
  474. <6>msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
  475. <6>msm_hsusb_phy_reset
  476. <6>msm_hsusb msm_hsusb: suspend
  477. <6>msm_hsusb msm_hsusb: reset
  478. <6>msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  479. <6>msm_hsusb msm_hsusb: reset
  480. <6>msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  481. <6>android_usb gadget: high speed config #1: android
  482. <7>diag: USB connected
  483. <6>do_detect_factory_cable : Using PIF ZIG (0)
  484. <6>
  485. <6>Charger Type: STD DOWNSTREAM PORT
  486. <6>request_suspend_state: wakeup (3->0) at 22690533381 (2013-02-23 15:12:46.198551692 UTC)
  487. <6>request_suspend_state: wakeup (0->0) at 26555018366 (2013-02-23 15:12:50.063035010 UTC)
  488. <6>request_suspend_state: wakeup (0->0) at 31796723368 (2013-02-23 15:12:55.304741679 UTC)
  489. <6>request_suspend_state: wakeup (0->0) at 36688171697 (2013-02-23 15:13:00.196188342 UTC)
  490. <6>request_suspend_state: wakeup (0->0) at 41587893361 (2013-02-23 15:13:05.095910005 UTC)
  491. <6>request_suspend_state: wakeup (0->0) at 46478591693 (2013-02-23 15:13:09.986608337 UTC)
  492. <6>request_suspend_state: wakeup (0->0) at 51359831694 (2013-02-23 15:13:14.867848338 UTC)
  493. <6>request_suspend_state: wakeup (0->0) at 56257110026 (2013-02-23 15:13:19.765128337 UTC)
  494. <6>request_suspend_state: wakeup (0->0) at 61155935023 (2013-02-23 15:13:24.663951667 UTC)
  495. <6>request_suspend_state: wakeup (0->0) at 66038405018 (2013-02-23 15:13:29.546421662 UTC)
  496. <6>request_suspend_state: wakeup (0->0) at 70911858353 (2013-02-23 15:13:34.419874997 UTC)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement