Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Mar 25 14:35:13 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bb780000 (usable)
 BIOS-e820: 00000000bb780000 - 00000000bb78e000 (ACPI data)
 BIOS-e820: 00000000bb78e000 - 00000000bb7d0000 (ACPI NVS)
 BIOS-e820: 00000000bb7d0000 - 00000000bb7e0000 (reserved)
 BIOS-e820: 00000000bb7ed000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
DMI: MSI MS-7635/H55M-ED55 (MS-7635) , BIOS V1.2 01/11/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xbb780 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-E3FFF write-protect
  E4000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 13C000000 mask FFC000000 uncachable
  1 base 000000000 mask F00000000 write-back
  2 base 100000000 mask FC0000000 write-back
  3 base 0C0000000 mask FC0000000 uncachable
  4 base 0BC000000 mask FFC000000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
RAMDISK: 7fe62000 - 7fff0000
Allocated new RAMDISK: 37670000 - 377fde7d
Move RAMDISK from 000000007fe62000 - 000000007ffefe7c to 37670000 - 377fde7c
ACPI: RSDP 000fa280 00014 (v00 ACPIAM)
ACPI: RSDT bb780000 00040 (v01 7635MS A7635100 20100111 MSFT 00000097)
ACPI: FACP bb780200 00084 (v01 7635MS A7635100 20100111 MSFT 00000097)
ACPI: DSDT bb7805e0 0776A (v01  A7635 A7635100 00000100 INTL 20051117)
ACPI: FACS bb78e000 00040
ACPI: APIC bb780390 0008C (v01 7635MS A7635100 20100111 MSFT 00000097)
ACPI: MCFG bb780420 0003C (v01 7635MS OEMMCFG  20100111 MSFT 00000097)
ACPI: OEMB bb78e040 00082 (v01 7635MS A7635100 20100111 MSFT 00000097)
ACPI: HPET bb78a5e0 00038 (v01 7635MS OEMHPET  20100111 MSFT 00000097)
ACPI: GSCI bb78e0d0 02024 (v01 7635MS GMCHSCI  20100111 MSFT 00000097)
ACPI: SSDT bb791840 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
2111MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000bb780
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000bb780
On node 0 totalpages: 767757
free_area_init_node: node 0, pgdat c1445880, node_mem_map f5eff200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 4224 pages used for memmap
  HighMem zone: 536322 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5800000 s27264 r0 d21888 u524288
pcpu-alloc: s27264 r0 d21888 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 761757
Kernel command line: root=/dev/sda1 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 15357120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:000bb780)
Memory: 3023372k/3071488k available (3165k kernel code, 47656k reserved, 1243k data, 424k init, 2162184k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc144f000 - 0xc14b9000   ( 424 kB)
      .data : 0xc1317758 - 0xc144e5a0   (1243 kB)
      .text : 0xc1000000 - 0xc1317758   (3165 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptable hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
CPU 0 irqstacks, hard=f440a000 soft=f440c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2940.496 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5883.03 BogoMIPS (lpj=9801653)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
ACPI: Core revision 20101013
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz stepping 02
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f4522000 soft=f4524000
Booting Node   0, Processors  #1
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
CPU 2 irqstacks, hard=f4530000 soft=f4532000
 #2
Initializing CPU#2
NMI watchdog enabled, takes one hw-pmu counter.
CPU 3 irqstacks, hard=f4542000 soft=f4544000
 #3
Initializing CPU#3
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (23533.48 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT bb790100 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT bb791340 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xbc000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci_root PNP0A08:00: host bridge window [mem 0x00000000-0xffffffff]
pci_root PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xffffffff]; [mem 0x00000000-0xffffffff] ignored
pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000ce800-0x000d45ff]
pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0041] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xbc00-0xbc07]
pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfb9fa000-0xfb9fa00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfb9f8000-0xfb9f83ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfb9f6000-0xfb9f63ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0xb880-0xb887]
pci 0000:00:1f.2: reg 14: [io  0xb800-0xb803]
pci 0000:00:1f.2: reg 18: [io  0xb480-0xb487]
pci 0000:00:1f.2: reg 1c: [io  0xb400-0xb403]
pci 0000:00:1f.2: reg 20: [io  0xb080-0xb09f]
pci 0000:00:1f.2: reg 24: [mem 0xfb9f4000-0xfb9f47ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfb9f2000-0xfb9f20ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:01:00.0: [1000:0058] type 0 class 0x000100
pci 0000:01:00.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:01:00.0: reg 14: [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xfbce0000-0xfbceffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfba00000-0xfbbfffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbcfffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:04:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.5:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:05:00.0: [1131:7146] type 0 class 0x000480
pci 0000:05:00.0: reg 10: [mem 0xfbfffc00-0xfbfffdff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xbc000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:01.0: address space collision: [mem 0xfba00000-0xfbcfffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1c.5: address space collision: [mem 0xfbe00000-0xfbefffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1c.5: address space collision: [mem 0xfaf00000-0xfaffffff 64bit pref] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1e.0: address space collision: [mem 0xfbf00000-0xfbffffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:02.0: address space collision: [mem 0xfb400000-0xfb7fffff 64bit] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:02.0: address space collision: [mem 0xd0000000-0xdfffffff 64bit pref] conflicts with PCI Bus 0000:00 [mem 0xbc000000-0xdfffffff]
pci 0000:00:16.0: address space collision: [mem 0xfb9fa000-0xfb9fa00f 64bit] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1a.0: address space collision: [mem 0xfb9f8000-0xfb9f83ff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1d.0: address space collision: [mem 0xfb9f6000-0xfb9f63ff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1f.2: address space collision: [mem 0xfb9f4000-0xfb9f47ff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:00:1f.3: address space collision: [mem 0xfb9f2000-0xfb9f20ff 64bit] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
pci 0000:01:00.0: no compatible bridge window for [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:01:00.0: no compatible bridge window for [mem 0xfbce0000-0xfbceffff 64bit]
pci 0000:04:00.0: no compatible bridge window for [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:04:00.0: no compatible bridge window for [mem 0xfaff8000-0xfaffbfff 64bit pref]
pci 0000:05:00.0: address space collision: [mem 0xfbfffc00-0xfbfffdff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xfed8ffff]
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bb780000 - 00000000bbffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xbc000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: [mem 0x00000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0060]
pnp 00:06: [io  0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: [io  0x0000-0xffffffff disabled]
pnp 00:07: [io  0x0a00-0x0adf]
pnp 00:07: [io  0x0ae0-0x0aef]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x002d]
pnp 00:08: [io  0x0030-0x003f]
pnp 00:08: [io  0x0044-0x005f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [io  0x0800-0x087f]
pnp 00:08: [io  0x0000-0xffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed45000-0xfed89fff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed40000-0xfed8ffff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xbbffffff]
pnp 00:0c: [mem 0xfed90000-0xffffffff]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:02.0 BAR 0 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 0 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:02.0 BAR 0 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0xbbffffff] because it overlaps 0000:00:02.0 BAR 0 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:00:02.0 BAR 2 [mem 0x00000000-0x0fffffff 64bit pref]
pnp 00:0c: disabling [mem 0x000c0000-0x000cffff disabled] because it overlaps 0000:00:02.0 BAR 2 [mem 0x00000000-0x0fffffff 64bit pref]
pnp 00:0c: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:00:02.0 BAR 2 [mem 0x00000000-0x0fffffff 64bit pref]
pnp 00:0c: disabling [mem 0x00100000-0xbbffffff disabled] because it overlaps 0000:00:02.0 BAR 2 [mem 0x00000000-0x0fffffff 64bit pref]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io  0x0a00-0x0adf] has been reserved
system 00:07: [io  0x0ae0-0x0aef] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfba00000-0xfbbfffff pref]
pci 0000:04:00.0: no compatible bridge window for [mem 0xfbee0000-0xfbefffff pref]
pci 0000:00:02.0: BAR 2: assigned [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: BAR 2: set to [mem 0xc0000000-0xcfffffff 64bit pref] (PCI address [0xc0000000-0xcfffffff])
pci 0000:00:02.0: BAR 0: assigned [mem 0xff000000-0xff3fffff 64bit]
pci 0000:00:02.0: BAR 0: set to [mem 0xff000000-0xff3fffff 64bit] (PCI address [0xff000000-0xff3fffff])
pci 0000:00:01.0: BAR 15: assigned [mem 0xff400000-0xff5fffff pref]
pci 0000:00:01.0: BAR 14: assigned [mem 0xfef00000-0xfeffffff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xff600000-0xff7fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xff800000-0xff9fffff 64bit pref]
pci 0000:00:1c.5: BAR 14: assigned [mem 0xffa00000-0xffbfffff]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xffc00000-0xffdfffff pref]
pci 0000:00:1e.0: BAR 14: assigned [mem 0xd0000000-0xd00fffff]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1f.2: BAR 5: assigned [mem 0xfed90000-0xfed907ff]
pci 0000:00:1f.2: BAR 5: set to [mem 0xfed90000-0xfed907ff] (PCI address [0xfed90000-0xfed907ff])
pci 0000:00:1a.0: BAR 0: assigned [mem 0xfed90800-0xfed90bff]
pci 0000:00:1a.0: BAR 0: set to [mem 0xfed90800-0xfed90bff] (PCI address [0xfed90800-0xfed90bff])
pci 0000:00:1d.0: BAR 0: assigned [mem 0xfed90c00-0xfed90fff]
pci 0000:00:1d.0: BAR 0: set to [mem 0xfed90c00-0xfed90fff] (PCI address [0xfed90c00-0xfed90fff])
pci 0000:00:1f.3: BAR 0: assigned [mem 0xfed91000-0xfed910ff 64bit]
pci 0000:00:1f.3: BAR 0: set to [mem 0xfed91000-0xfed910ff 64bit] (PCI address [0xfed91000-0xfed910ff])
pci 0000:00:16.0: BAR 0: assigned [mem 0xfed91100-0xfed9110f 64bit]
pci 0000:00:16.0: BAR 0: set to [mem 0xfed91100-0xfed9110f 64bit] (PCI address [0xfed91100-0xfed9110f])
pci 0000:01:00.0: BAR 6: assigned [mem 0xff400000-0xff5fffff pref]
pci 0000:01:00.0: BAR 3: assigned [mem 0xfef00000-0xfef0ffff 64bit]
pci 0000:01:00.0: BAR 3: set to [mem 0xfef00000-0xfef0ffff 64bit] (PCI address [0xfef00000-0xfef0ffff])
pci 0000:01:00.0: BAR 1: assigned [mem 0xfef10000-0xfef13fff 64bit]
pci 0000:01:00.0: BAR 1: set to [mem 0xfef10000-0xfef13fff 64bit] (PCI address [0xfef10000-0xfef13fff])
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfef00000-0xfeffffff]
pci 0000:00:01.0:   bridge window [mem 0xff400000-0xff5fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xff600000-0xff7fffff]
pci 0000:00:1c.0:   bridge window [mem 0xff800000-0xff9fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xffc00000-0xffc1ffff pref]
pci 0000:04:00.0: BAR 4: assigned [mem 0xffc20000-0xffc23fff 64bit pref]
pci 0000:04:00.0: BAR 4: set to [mem 0xffc20000-0xffc23fff 64bit pref] (PCI address [0xffc20000-0xffc23fff])
pci 0000:04:00.0: BAR 2: assigned [mem 0xffc24000-0xffc24fff 64bit pref]
pci 0000:04:00.0: BAR 2: set to [mem 0xffc24000-0xffc24fff 64bit pref] (PCI address [0xffc24000-0xffc24fff])
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xffa00000-0xffbfffff]
pci 0000:00:1c.5:   bridge window [mem 0xffc00000-0xffdfffff pref]
pci 0000:05:00.0: BAR 0: assigned [mem 0xd0000000-0xd00001ff]
pci 0000:05:00.0: BAR 0: set to [mem 0xd0000000-0xd00001ff] (PCI address [0xd0000000-0xd00001ff])
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x00000000-0xffffffff]
pci_bus 0000:00: resource 7 [mem 0xbc000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfef00000-0xfeffffff]
pci_bus 0000:01: resource 2 [mem 0xff400000-0xff5fffff pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xff600000-0xff7fffff]
pci_bus 0000:02: resource 2 [mem 0xff800000-0xff9fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xffa00000-0xffbfffff]
pci_bus 0000:04: resource 2 [mem 0xffc00000-0xffdfffff pref]
pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x00000000-0xffffffff]
pci_bus 0000:05: resource 7 [mem 0xbc000000-0xdfffffff]
pci_bus 0000:05: resource 8 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1592k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1302734971.493:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1685
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:03: setting system clock to 2011-04-13 22:49:32 UTC (1302734972)
Initalizing network drop monitor service
Freeing unused kernel memory: 424k freed
udev[44]: starting version 166
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
Fusion MPT base driver 3.04.17
Copyright (c) 1999-2008 LSI Corporation
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
Fusion MPT SAS Host driver 3.04.17
mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mptbase: ioc0: Initiating bringup
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfed90000 port 0xfed90100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xfed90000 port 0xfed90180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xfed90000 port 0xfed90200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfed90000 port 0xfed90280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xfed90000 port 0xfed90300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xfed90000 port 0xfed90380 irq 40
ata1: SATA link down (SStatus 0 SControl 300)
ioc0: LSISAS1068E B3: Capabilities={Initiator}
mptsas 0000:01:00.0: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: INTEL SSDSA2MH080G1GC, 045C8820, max UDMA/133
ata2.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
scsi6 : ioc0: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
scsi 6:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
scsi 6:0:1:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 73 00 00 08
sd 6:0:1:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x1221000002000000
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:2:0: Direct-Access     ATA      WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 6:0:2:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000
scsi 6:0:3:0: Direct-Access     ATA      WDC WD20EARS-00M AB50 PQ: 0 ANSI: 5
sd 6:0:2:0: [sde] Write Protect is off
sd 6:0:2:0: [sde] Mode Sense: 73 00 00 08
sd 6:0:3:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x1221000004000000
sd 6:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:1:0: [sdd] Write Protect is off
sd 6:0:1:0: [sdd] Mode Sense: 73 00 00 08
scsi 6:0:4:0: Direct-Access     ATA      WDC WD20EARS-00M AB50 PQ: 0 ANSI: 5
sd 6:0:4:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 5, phy 5, sas_addr 0x1221000005000000
sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:5:0: Direct-Access     ATA      WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 6:0:5:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x1221000006000000
 sdc: sdc1
sd 6:0:3:0: [sdf] Write Protect is off
sd 6:0:3:0: [sdf] Mode Sense: 73 00 00 08
 sde: sde1
sd 6:0:5:0: [sdh] Write Protect is off
sd 6:0:5:0: [sdh] Mode Sense: 73 00 00 08
sd 6:0:5:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:6:0: Direct-Access     ATA      WDC WD20EARS-00S 0A80 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] Attached SCSI disk
sd 6:0:6:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 7, phy 7, sas_addr 0x1221000007000000
sd 6:0:4:0: [sdg] Write Protect is off
sd 6:0:4:0: [sdg] Mode Sense: 73 00 00 08
scsi 6:0:7:0: Direct-Access     ATA      WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 6:0:2:0: [sde] Attached SCSI disk
sd 6:0:7:0: [sdj] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:4:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:7:0: [sdj] Write Protect is off
sd 6:0:7:0: [sdj] Mode Sense: 73 00 00 08
sd 6:0:7:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdh: sdh1
 sdd: sdd1
sd 6:0:6:0: [sdi] Write Protect is off
sd 6:0:6:0: [sdi] Mode Sense: 73 00 00 08
 sdf: sdf1
sd 6:0:6:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:5:0: [sdh] Attached SCSI disk
 sdg: sdg1
 sdj: sdj1
sd 6:0:1:0: [sdd] Attached SCSI disk
sd 6:0:7:0: [sdj] Attached SCSI disk
sd 6:0:3:0: [sdf] Attached SCSI disk
sd 6:0:4:0: [sdg] Attached SCSI disk
 sdi: sdi1
sd 6:0:6:0: [sdi] Attached SCSI disk
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
udev[574]: starting version 166
iTCO_vendor_support: vendor-support=0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
ACPI: acpi_idle yielding to intel_idle
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:1:0: Attached scsi generic sg3 type 0
sd 6:0:2:0: Attached scsi generic sg4 type 0
sd 6:0:3:0: Attached scsi generic sg5 type 0
sd 6:0:4:0: Attached scsi generic sg6 type 0
sd 6:0:5:0: Attached scsi generic sg7 type 0
sd 6:0:6:0: Attached scsi generic sg8 type 0
sd 6:0:7:0: Attached scsi generic sg9 type 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 41 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xf85c2000, 40:61:86:98:f8:35, XID 081000c0 IRQ 41
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfed90800
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfed90c00
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Linux video capture interface: v2.00
[drm] Initialized drm 1.1.0 20060810
saa7146: register extension 'budget_av'.
budget_av 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
saa7146: found saa7146 @ mem f8036000 (revision 1, irq 16) (0x1894,0x0022).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (KNC1 DVB-C MK3)
adapter failed MAC signature check
encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] MTRR allocation failed.  Graphics performance may suffer.
i915 0000:00:02.0: irq 42 for MSI/MSI-X
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-1: new high speed USB device using ehci_hcd and address 2
KNC1-0: MAC addr = 00:09:d6:6d:a5:f4
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
budget-av: ci interface initialised.
usb 2-1: new high speed USB device using ehci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
EXT3-fs (sda1): using internal journal
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdf1): using internal journal
EXT3-fs (sdf1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sde1): using internal journal
EXT3-fs (sde1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdh1): using internal journal
EXT3-fs (sdh1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdg1): using internal journal
EXT3-fs (sdg1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdd1): using internal journal
EXT3-fs (sdd1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdi1): using internal journal
EXT3-fs (sdi1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdj1): using internal journal
EXT3-fs (sdj1): mounted filesystem with ordered data mode
r8169 0000:04:00.0: eth0: link up
r8169 0000:04:00.0: eth0: link up
budget-av: cam inserted A
dvb_ca adapter 0: DVB CAM detected and initialised successfully
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
f71882fg: Found f71889fg chip at 0xa00, revision 17
f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
coretemp coretemp.0: TjMax is 105 C.
coretemp coretemp.1: TjMax is 105 C.