[2019-08-23 18:54:29] [Output] : ★ Alex Harold walks towards nismo's driver door as he extends his right arm towards his pocket as he-
[2019-08-23 18:54:46] [Output] : ★ -reaches for the nismo key as he grabs it out as he presses the unlock button as he pockets-      ((Alex Harold))
[2019-08-23 18:55:08] [Output] : ★ -the key back to his pocket as he extends right arm towards the door handle bar as he-      ((Alex Harold))
[2019-08-23 18:55:38] [Output] : ★ -opens the door, as he carefully extends right arm towards the hood releaser as he-      ((Alex Harold))
[2019-08-23 18:56:07] [Output] : Payslip
[2019-08-23 18:56:07] [Output] :
[2019-08-23 18:56:07] [Output] :   Wage Paid: $650
[2019-08-23 18:56:07] [Output] :   Bank Interest: $745 (≈0.54%)
[2019-08-23 18:56:07] [Output] :   Income Tax of 10%: $65
[2019-08-23 18:56:07] [Output] :   Vehicle Tax: $187
[2019-08-23 18:56:07] [Output] :   Property Expenses: $70
[2019-08-23 18:56:07] [Output] :   Gross Income: $1,073
[2019-08-23 18:56:07] [Output] :   Remark(s): Transferred to your bank account.
[2019-08-23 18:56:42] [Output] : ★ -pulls it to the back, ' hood release sound would be heared ', carefully closes the door as-      ((Alex Harold))
[2019-08-23 18:56:58] [Output] : ★ -makes his way towards the hood as he gently insterts his right hand under the hood-      ((Alex Harold))
[2019-08-23 18:57:18] [Output] : ★ -as he pulls it up, then extends left hand towards the hood bar as he grabs it then stables-      ((Alex Harold))
[2019-08-23 18:57:48] [Output] : ★ -the hood with it, as he walks towards his mechanic tool kit as he extends right arm-      ((Alex Harold))
[2019-08-23 18:58:21] [Output] : ★ -towards the top shelf as he pulls it to the back 'alot of tools would be visible'-      ((Alex Harold))
[2019-08-23 18:58:59] [Output] : ★ Alex Harold extends right arm towards the 10mm socket then the ratchet as he places them on the top-
[2019-08-23 18:59:18] [Output] : ★ -of the mechanic tool kit as he then places both arms onto the tool kit as he wheels-      ((Alex Harold))
[2019-08-23 18:59:42] [Output] : ★ -it towards the nismo, as he stops it there, then grabs the ratchet and the 10mm socket once      ((Alex Harold))
[2019-08-23 19:00:11] [Output] : ADVERT: Yellow Cab Co is now taking fares! Call us today! - #8294
[2019-08-23 19:00:50] [Output] : ★ -again as he connects the socket to the ratchet then grabs it closer to the nismo passenger-      ((Alex Harold))
[2019-08-23 19:01:19] [Output] : ★ -side where the battery located, Alex would extends left arm towards the battery cover-      ((Alex Harold))
[2019-08-23 19:02:12] [Output] : ★ -then would slowly raise it by clicking the two buttons as he places it in a safe location-      ((Alex Harold))
[2019-08-23 19:02:45] [Output] : ★ -near the tool kit, ' the battery would be clearly visible', Alex would places the ratchet-      ((Alex Harold))
[2019-08-23 19:03:42] [Output] : ★ -onto the bolt connecting the negative cable to the battery as he turns it to the left,-      ((Alex Harold))
[2019-08-23 19:04:09] [Output] : ★ -as he makes sure to loosen it at the very end then disconnecting the negative cable.      ((Alex Harold))
[2019-08-23 19:06:58] [Output] : ★ Alex Harold places the ratchet with the 10mm socket near the tool kit as he reaches for 45degree pliers-
[2019-08-23 19:07:36] [Output] : ★ -as he grabs it then heads towards the gtr engine as he places it onto the engine grounding-      ((Alex Harold))
[2019-08-23 19:08:03] [Output] : ★ -that goes from the body to the engine as he makes sure to remove it as he then-      ((Alex Harold))
[2019-08-23 19:08:54] [Output] : ★ -places the 45degree pliers to it original location as he reaches for the 12mm ratchet as he      ((Alex Harold))
[2019-08-23 19:09:23] [Output] : ★ -grabs it then places it onto the the 12mm bolt as he turns it to the left then disengages -      ((Alex Harold))
[2019-08-23 19:10:11] [Output] : ADVERT: Yellow Cab Co is now taking fares! Call us today! - #8294
[2019-08-23 19:10:33] [Output] : ★ -the plastic locating tab, as he then places it to it original location, as he reaches for-      ((Alex Harold))
[2019-08-23 19:11:31] [Output] : ★ -the MAF Sensor connector as he uses right hand to disconnect it then disconnects the -      ((Alex Harold))
[2019-08-23 19:12:13] [Output] : ★ -harness locating tab, as he then extends right arm towards the tool kit as he reaches for-      ((Alex Harold))
[2019-08-23 19:12:50] [Output] : ★ -a flatscrewdriver as he grabs it then places it onto the hose that goes from the turbo-      ((Alex Harold))
[2019-08-23 19:13:51] [Output] : ★ - as he makes sure to loosen it at the very end as he slides it downward away from the -      ((Alex Harold))
[2019-08-23 19:14:05] [Output] : ★ -airbox.      ((Alex Harold))
[2019-08-23 19:14:40] [Output] : ★ Alex Harold places the flat screwdriver back to the tool kit as he reaches for a 10mm ratchet as he-
[2019-08-23 19:15:02] [Output] : ★ -grabs it then places it onto one of the 2 bolts that hold the air box to the radiator core-      ((Alex Harold))
[2019-08-23 19:15:36] [Output] : ★ -support as he loosen them by turning the ratchet to the left as he removes them then-      ((Alex Harold))
[2019-08-23 19:16:12] [Output] : ★ -places them in a small case to prevent loosing them, as he then places the ratchet down-      ((Alex Harold))
[2019-08-23 19:17:19] [Output] : ★ -then lifts the air box gently out of the engine bay using both arms as he places it-      ((Alex Harold))
[2019-08-23 19:18:36] [Output] : ★ near the wall in a safe location as he then reaches for the 10mm ratchet as he grabs it-      ((Alex Harold))
[2019-08-23 19:19:29] [Output] : ★ -then bends down on his knees as he places the ratchet onto one of the 2 bolts concealed-      ((Alex Harold))
[2019-08-23 19:19:57] [Output] : ★ -by the rubber covers then removes the plastic clips using clips tool as he gently-      ((Alex Harold))
[2019-08-23 19:20:38] [Output] : ★ -removes the front lip under cover, as he then places the 10mm ratchet onto one of the 10mm-      ((Alex Harold))
[2019-08-23 19:21:24] [Output] : ★ -bots and the plastic clips as he removes the center under cover then.      ((Alex Harold))
[2019-08-23 19:21:56] [Output] : ★ Alex Harold grabs the 10mm bolts and the plastic clips then places them into the small case-
[2019-08-23 19:22:12] [Output] : ★ -as he makes his way towards the tool kit as he reaches for the tire tool as he grabs it-      ((Alex Harold))
[2019-08-23 19:23:05] [Output] : ★ - then places it onto one of the 5 lug nuts as he turns it to the left as he loosens them at      ((Alex Harold))
[2019-08-23 19:23:35] [Output] : ★ -the very end as he slowly pulls the front right wheel slowly as he places it near the wall-      ((Alex Harold))
[2019-08-23 19:24:03] [Output] : ★ -as he grabs the tire tool once again then bends down near the front left wheel as he-      ((Alex Harold))
[2019-08-23 19:24:37] [Output] : ★ -places it onto one of the 5lugs as he turns it to the left as he loosens them at the very -      ((Alex Harold))
[2019-08-23 19:24:58] [Output] : ★ -end as he gently pulls of the wheel as he places it near the wall as he makes his way-      ((Alex Harold))
[2019-08-23 19:25:50] [Output] : ★ -towards the tool kit as he reaches for his philips screwdriver as he places it onto the-      ((Alex Harold))
[2019-08-23 19:26:32] [Output] : ★ -screw then uses the clips tool to remove the 12 clips as he then bends the liner slightly-      ((Alex Harold))
[2019-08-23 19:27:16] [Output] : ★ -to clearance the axel and brakes lines, as he then places the tools back as he reaches for-      ((Alex Harold))
[2019-08-23 19:27:49] [Output] : ★ -plastic pry tool as he grabs it towards the front side markers as he removes them-      ((Alex Harold))
[2019-08-23 19:28:03] [Output] : ADVERT: For sale big farm house on interstate 27 looking 200k | #713104
[2019-08-23 19:28:23] [Output] : ★ -one by one by gently pressing the inward on the metal lock clip.      ((Alex Harold))
[2019-08-23 19:28:39] [Output] :  [English] Alex Harold says: Ah shit this thing is hard.
[2019-08-23 19:29:40] [Output] : ADVERT: [Auction] River Ranch, Red County, San Andreas - Owl.pm/108088 [ENDS: 01/09/2019]
[2019-08-23 19:30:11] [Output] : ★ Alex Harold places the tool back to it original location as he reaches for the clips tool as he places-
[2019-08-23 19:30:41] [Output] : ★ -it onto one of the 3 clips on the radiator panel as he removes them one by one-      ((Alex Harold))
[2019-08-23 19:31:16] [Output] : ★ -as he removes the 5 bumper clips afterthat one by one, as he then places the tool back-      ((Alex Harold))
[2019-08-23 19:31:38] [Output] : ★ -then reaches for 10mm ratchet as he grabs it then places it onto one of the 4 bolts that -      ((Alex Harold))
[2019-08-23 19:32:27] [Output] : ★ -the bumper, as then carefully uses both arms to pull the front bumper froward-      ((Alex Harold))
[2019-08-23 19:32:56] [Output] : ★ -and away from the vehicle as he places it near the wall, as he then disconnects the-      ((Alex Harold))
[2019-08-23 19:33:26] [Output] : ★ - electrical connectors from the headlights, also the locating tabs for the headlights.      ((Alex Harold))
[2019-08-23 19:33:56] [Output] : ★ Alex Harold grabs the 10mm ratchet using right hand then places it onto the 10mm bolts that are holding-
[2019-08-23 19:34:58] [Output] : ★ -the bumper locating bracket as he loosens them which directly beneath the headlights-      ((Alex Harold))
[2019-08-23 19:35:33] [Output] : ADVERT: For sale big farm house on interstate 27 looking 200k | #713104
[2019-08-23 19:35:40] [Output] : ★ Alex Harold places the 10mm ratchet onto one of the 10mm bolts that secure the headlights to the car as-
[2019-08-23 19:36:01] [Output] : ★ -carefully lift it away from the car as he places it near the wall.      ((Alex Harold))
[2019-08-23 19:42:07] [Output] : ★ Alex Harold uses the clips tool to remove the wiring harness from the front support beam, ashe-
[2019-08-23 19:42:42] [Output] : ★ -disconnects the horns, the ac high presure switch also the hood latch cable retaining clips      ((Alex Harold))
[2019-08-23 19:43:50] [Output] : ★ -as he removes the air snorkels then by removing the plastic lock clip as he disconnects-      ((Alex Harold))
[2019-08-23 19:44:14] [Output] : ★ -the hood latch cable from the latches by pushing inwards towards the engine-      ((Alex Harold))
[2019-08-23 19:45:33] [Output] : ★ -on the plastic lock that holds the cable to the latch,as he then grabs the 10mm ratchet as-      ((Alex Harold))
[2019-08-23 19:45:59] [Output] : ★ -he places it onto the lower lip support from the crash beam as he gently bends the support-      ((Alex Harold))
[2019-08-23 19:46:37] [Output] : ★ -away from the stud as he then removes the crash beam by removing the 8 12mm bolts one by-      ((Alex Harold))
[2019-08-23 19:47:00] [Output] : ★ -one as he pulls it outwards then places it near the wall, as he removes the 10mm bolts that      ((Alex Harold))
[2019-08-23 19:47:54] [Output] : ★ -holds the support also the bolt behind the A/C condenser pping and the 2 bolts holding-      ((Alex Harold))
[2019-08-23 19:48:49] [Output] : ★ -the power steering cooler, as he removes the intercooler piping from the intercooler by-      ((Alex Harold))
[2019-08-23 19:49:13] [Output] : ★ -disconnecting the clamps holding it and a flat screw driver as he removes then the intercoo      ((Alex Harold))
[2019-08-23 19:49:58] [Output] : ★ -assembly from the vehicle by first pulling the right outwards beside the oil cooler, as he-      ((Alex Harold))
[2019-08-23 19:50:23] [Output] : ★ -removes the air shroud by removing the 4 plastic lock connectors as he removes the wire-      ((Alex Harold))
[2019-08-23 19:50:53] [Output] : ★ -harness locating that connect the oil cooler brakets., as he then loosen the oil lines-      ((Alex Harold))
[2019-08-23 19:51:26] [Output] : ★ - by removing the 4 10mm nuts from the base of the cooler after placing a bucket under it-      ((Alex Harold))
[2019-08-23 19:51:57] [Output] : ★ - ' the oil will leak into the bucket', Alex removes the 2 10mm bolts that holds the oil-      ((Alex Harold))
[2019-08-23 19:52:19] [Output] : ★ -oil lines in place then would remove the 3 10mm bolts that attach the lower support-      ((Alex Harold))
[2019-08-23 19:52:45] [Output] : ★ -to the body as he removes the 2 10mm bolts from the upper bracket then removes*      ((Alex Harold))
[2019-08-23 19:53:16] [Output] : ★ -the cooler from the vehicle, as he recovers the refrigerant in the A/C system with approved      ((Alex Harold))
[2019-08-23 19:53:46] [Output] : ★ - recivery machine, as he disconnects the 2AC condenser lines using the special service tool      ((Alex Harold))
[2019-08-23 19:54:37] [Output] : ★ -as he removes the 2 12mm bolts and one 10mm bolt from cach side of the AC condenser support      ((Alex Harold))
[2019-08-23 19:55:10] [Output] : ★ -bracket hood support bracket as he removes the 2 10mm bolts that secure the condenser-      ((Alex Harold))
[2019-08-23 19:55:48] [Output] : ★ -to the radiator as he pulls the top of the condenser outwards, and then up, as he drain the      ((Alex Harold))
[2019-08-23 19:56:23] [Output] : ★ -engine coolant by removing the drain plug as he removes the upper radiator and lower -      ((Alex Harold))
[2019-08-23 19:57:21] [Output] : ★ -radiator hose as he removes the right side air filter box to allow clearence to move the -      ((Alex Harold))
[2019-08-23 19:57:45] [Output] : ★ -steering cooler as he removes the 10mm bolt that secures the power steering cooler*      ((Alex Harold))
[2019-08-23 19:58:18] [Output] : ★ -lines as he pushes the rubber insulator from the front radiator core support, as tuurns the      ((Alex Harold))
[2019-08-23 19:58:44] [Output] : ★ -upper radiator locks as show on each one to release the top of the radiator, as he*      ((Alex Harold))
[2019-08-23 19:59:05] [Output] : ★ -tilt the top of the radiator outward and the lift free from the vehicle as he follows-      ((Alex Harold))
[2019-08-23 19:59:29] [Output] : ★ -wire harness and disconnects all locating tabs, as he removes the upper fill adapter for-      ((Alex Harold))
[2019-08-23 20:00:05] [Output] : ★ -the window washer jug by removing the plastic lock clip and lifting upwards.      ((Alex Harold))
[2019-08-23 20:00:29] [Output] : ★ -as he removes the two electrical from the pump fluid level sensor also the locating tabs.      ((Alex Harold))
[2019-08-23 20:00:51] [Output] : ★ as he removes the hose from the pump then uses a catch can as the fluid will drain-      ((Alex Harold))
[2019-08-23 20:01:08] [Output] : ★ - as he removes the 10mm bolts and removes the washer jug from the vehicle as he-      ((Alex Harold))
[2019-08-23 20:01:29] [Output] : ★ -removes the 4 10mm bolts from the frame support bracket that goes to the radiaotr core-      ((Alex Harold))
[2019-08-23 20:02:04] [Output] : ★ -support, as removes the radiator overflow bottle by removing the hoses and the 2 10mm -      ((Alex Harold))
[2019-08-23 20:02:31] [Output] : ★ -bolts on each side, as he disconnects the electrical connectors and locating tabs on the *      ((Alex Harold))
[2019-08-23 20:03:11] [Output] : ★ - cooling fan shourd as he removes the 2 10mm nuts from the air bag sensor, as he unbolts-      ((Alex Harold))
[2019-08-23 20:03:37] [Output] : ★ --the power steering cooler lines from the radiator support and then the power steering cool      ((Alex Harold))
[2019-08-23 20:04:02] [Output] : ★ -line coming from the steering rack, as he then disconnects the power steering feed line-      ((Alex Harold))
[2019-08-23 20:04:47] [Output] : ★ -from the pump as he removes the front impact mounting 4 12mm bolts as he then removes-      ((Alex Harold))
[2019-08-23 20:05:15] [Output] : ★ -the 3 14mm bolts at each shock tower as he removes the final 12mm bolts holding the support      ((Alex Harold))
[2019-08-23 20:05:36] [Output] : ★ -to the frame rail, as he carefully slide the support forwards and away from the vehicle-      ((Alex Harold))
[2019-08-23 20:06:01] [Output] : ★ -as he removes the engine plastic civers by removing the plastic locking tabs then*      ((Alex Harold))
[2019-08-23 20:06:18] [Output] : ★ -removes the wiper arms by removing the decorative cap and then the 14mm nut.      ((Alex Harold))
[2019-08-23 20:06:44] [Output] : ★ then removes the large hose going to the emissions air pump then pulls into the engine bay.      ((Alex Harold))
[2019-08-23 20:07:50] [Output] : ★ as he disconnects the engine harness as he disengage the lock tabs from the fire wall then-      ((Alex Harold))
[2019-08-23 20:08:15] [Output] : ★ -removes the 4 10mm bolts nuts from the wire harness plate at the engine firewall-      ((Alex Harold))
[2019-08-23 20:08:46] [Output] : ★ - as he places the harness into the engine bay as he then removes the fuel lines by squeezin      ((Alex Harold))
[2019-08-23 20:09:21] [Output] : ★ -the tabs gently and pulling away from the metal line as he removes the purge evaporative-      ((Alex Harold))
[2019-08-23 20:09:44] [Output] : ★ -emissions line as he disconnects the shock electronic adjustement wires as he removes-      ((Alex Harold))
[2019-08-23 20:10:12] [Output] : ★ -the power harnesses from the battery as he removes the 2 12mm nuts then slowly works around      ((Alex Harold))
[2019-08-23 20:10:49] [Output] : ★ -the cowl removing the locking tabs from the body as he removes the 10mm bolt on the other      ((Alex Harold))
[2019-08-23 20:11:11] [Output] : ★ -AC line as he makes sure to wrap these lines with the tap to prevent contamination-      ((Alex Harold))
[2019-08-23 20:11:45] [Output] : ★ as he then removes the two heater core hoses then the ABS speed sensor harness from the body      ((Alex Harold))
[2019-08-23 20:12:06] [Output] : ★ as he disconnects the rubber brake line from the body where the hard line meets it-      ((Alex Harold))
[2019-08-23 20:12:26] [Output] : ★ -as he removes the mid pipe then removes the fram support by removing 6 12mm bolts-      ((Alex Harold))
[2019-08-23 20:12:53] [Output] : ★ ashe locks the steering wheel in place inside the vehicle so that it can not turn-      ((Alex Harold))
[2019-08-23 20:13:31] [Output] : ★ -as he reaches for the lift remote then presses the up button as he lifts the car from the-      ((Alex Harold))
[2019-08-23 20:13:57] [Output] : ★ -ground as he removes the 12mm lock bolt on the steering shaft where it connects to the powe      ((Alex Harold))
[2019-08-23 20:14:28] [Output] : ★ -steering rack as he disconnects transmission cooler lines then removes the engine drive*      ((Alex Harold))
[2019-08-23 20:15:07] [Output] : ★ -shaft going to the transmission and the driveshaft going to the front differential as he-      ((Alex Harold))
[2019-08-23 20:15:29] [Output] : ★ -loosen the upper coilover bolts from the body then the upper ball joint by removing-      ((Alex Harold))
[2019-08-23 20:15:57] [Output] : ★ -14mm bolt and nut then removes the sway bar end links to allow the front sway bar to swing      ((Alex Harold))
[2019-08-23 20:16:29] [Output] : ★ -clear of the front cradle bolts, then support the engine cradle on either several high -      ((Alex Harold))
[2019-08-23 20:17:04] [Output] : ★ -strength jack stands.      ((Alex Harold))
[2019-08-23 20:17:31] [Output] : ★ uses the lift remote to slowly lift the vehicle free of the engine, paying close attention      ((Alex Harold))
[2019-08-23 20:17:47] [Output] : ★ -that nothing has gotten caught.      ((Alex Harold))
[2019-08-24 12:20:30] [Output] :  [English] Alex Harold says: I'm back to ya baby.
[2019-08-24 12:20:49] [Output] : ★ Alex Harold walks towards the mechanic tool kit as he extends right arm as he reaches for his gloves
[2019-08-24 12:21:10] [Output] : ★ -as he starts wearing them one by one as he reaches for the 10mm ratchet as hegrabs it then-      ((Alex Harold))
[2019-08-24 12:21:37] [Output] : ★ -heads towards the nismo's hood as he places the ratchet onto one of 2 10mm bolts-      ((Alex Harold))
[2019-08-24 12:22:12] [Output] : ★ - from the pipe as he loosens them as he removes the hose from the valve cover then removes-      ((Alex Harold))
[2019-08-24 12:23:52] [Output] : ★ Alex Harold as he places it onto the bolt on the stay as he unbolts it then loosen the hose clamps-
[2019-08-24 12:24:25] [Output] : ★ -from the turbo as he then removes the 10mm nut from the wire harness stay using a 10mm -      ((Alex Harold))
[2019-08-24 12:24:53] [Output] : ★ -ratchet, as he then removes the turbo suction pipe by removing the 2 12mm nuts one by one-      ((Alex Harold))
[2019-08-24 12:25:33] [Output] : ★ -and the actuator reference hose from the plastic retaining clip, as he then removes the hea      ((Alex Harold))
[2019-08-24 12:25:59] [Output] : ★ -head shields from the turbos by unbolting 9 10mm bolts on each side using a 10mm      ((Alex Harold))
[2019-08-24 12:26:31] [Output] : ★ -ratchet as he unbolts them one by one as he then removes the A/F sensor connectors from-      ((Alex Harold))
[2019-08-24 12:27:07] [Output] : ★ -the wire harness, then uses 14mmratchet to unbolt the 5 exhaust bolts one by one-      ((Alex Harold))
[2019-08-24 12:27:29] [Output] : ★ -as he then removes the 14mm nut from the down pipe stay, then removes the downpipes from -      ((Alex Harold))
[2019-08-24 12:27:59] [Output] : ★ -turbos as he then removes the actuator boost reference lines from the actuators, then -      ((Alex Harold))
[2019-08-24 12:28:23] [Output] : ★ -removes the oil return lines by loosening the clamp using a flat screw driver and removing-      ((Alex Harold))
[2019-08-24 12:29:03] [Output] : ★ -10mm bolt from stay using 10mm ratchet as he then removes the 17mm coolant banjo bolt-      ((Alex Harold))
[2019-08-24 12:29:32] [Output] : ★ -from the block using 17mm ratchet as he tremoves the coolant return by disconnecting the 2-      ((Alex Harold))
[2019-08-24 12:30:14] [Output] : ★ - rubber lines and 1 10mm bolt on stay, then removes the 17mm oil pressure feed bolt using-      ((Alex Harold))
[2019-08-24 12:31:10] [Output] : ★ -17mm ratchet from the back of the cylinder head as he removes the 6 14mm nuts using-      ((Alex Harold))
[2019-08-24 12:31:39] [Output] : ★ -17mm ratchet to release the manifold as he gently uses both arms to slowly lift it-      ((Alex Harold))
[2019-08-24 12:32:01] [Output] : ★ -away from the engine as he places it near the wall as he then reaches for his E8 torx-      ((Alex Harold))
[2019-08-24 12:32:23] [Output] : ★ -bit as he places it onto the OEM studs from the cylinder head as he starts to loosen them+      ((Alex Harold))
[2019-08-24 12:33:20] [Output] : ★ -one by one as he then grabs the new stainless steel studs inhead by threading one nut onto*      ((Alex Harold))
[2019-08-24 12:33:49] [Output] : ★ -the stud using right finger and then threadingthe second nut onto the stud so that they-      ((Alex Harold))
[2019-08-24 12:34:25] [Output] : ★ -will lock and allow to install the studs, as he then uses M12 bolt and cooper washer -      ((Alex Harold))
[2019-08-24 12:35:06] [Output] : ★ -plugs the old coolant feed on the block then install the oil feed line into the pressure fe      ((Alex Harold))
[2019-08-24 12:35:51] [Output] : ★ -feed at the back of the engine as he uses a light coating of liquid thread scaler to -      ((Alex Harold))
[2019-08-24 12:36:15] [Output] : ★ -prevent leaks as he then walks towards the box near the desk where the turbo kit located-      ((Alex Harold))
[2019-08-24 12:36:42] [Output] : ★ -as he grabs the new manifold then pulls it towards the engine as he sets it there then uses      ((Alex Harold))
[2019-08-24 12:38:52] [Output] : ★ -right hand finger to tighten the bolts, as he walks towards the turbo kit as he installs-      ((Alex Harold))
[2019-08-24 12:39:14] [Output] : ★ -the down pipe to the turbo and the waste gate by unbolting the 4 bolts for the waste gate-      ((Alex Harold))
[2019-08-24 12:39:49] [Output] : ★ -then tightening to the turbo, as he then installs the stay for the waste gate and down pipe      ((Alex Harold))
[2019-08-24 12:40:18] [Output] : ★ -to the bell housing as he installs the discharge pipe with smallest reducer hose with the-      ((Alex Harold))
[2019-08-24 12:40:38] [Output] : ★ -clamp as he tightens it using flat screw driver as he then installs the crank case fitting      ((Alex Harold))
[2019-08-24 12:41:06] [Output] : ★ -to the turbo inlet pipe, then the turbo inlet pipe using the larger reducer coupler with 2-      ((Alex Harold))
[2019-08-24 12:41:59] [Output] : ★ -clmaps as he tightens them at the end using flat screwdriver, as he then install the turbo-      ((Alex Harold))
[2019-08-24 12:42:25] [Output] : ★ -breather using small clamps then installs the o2 sensor back to the downpipesas he makes -      ((Alex Harold))
[2019-08-24 12:42:57] [Output] : ★ -sure to use anti seize on the o2 sensor thread as he he wraps the o2 sensor wire-      ((Alex Harold))
[2019-08-24 12:43:14] [Output] : ★ -to prevent melting.      ((Alex Harold))