API tools faq
paste
Advertisement
tieuvinhlong

Armbian_5.24_S9xxx_mate_Ubuntu_xenial_3.14.29_desktop_201702

tieuvinhlong
Feb 24th, 2017
532
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 52.72 KB | None | 0 0
raw download clone embed print report
  1. Welcome to minicom 2.7
  2.  
  3. OPTIONS: I18n
  4. Compiled on Feb  7 2016, 13:37:27.
  5. Port /dev/ttyUSB0, 17:42:18
  6.  
  7. Press CTRL-A Z for help on special keys
  8.  
  9. GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:800;NAND:0;READ:0;0.0;CHK:0;
  10. TE: 22387
  11.  
  12. BL2 Built : 13:48:56, Sep 23 2016.
  13. gxl g7459bd4 - jianxin.pan@droid06
  14.  
  15. set vcck to 1120 mv
  16. set vddee to 1000 mv
  17. Board ID = 2
  18. CPU clk: 1200MHz
  19. DQS-corr enabled
  20. DDR scramble enabled
  21. DDR3 chl: Rank0+1 @ 720MHz - FAIL
  22. DDR3 chl: Rank0 @ 720MHz - PASS
  23. Rank0: 1024MB-2T-11
  24. DataBus test pass!
  25. AddrBus test pass!
  26. NAND init
  27. Load fip header from NAND, src: 0x0000c000, des: 0x01400000, size: 0x00004000
  28. New fip structure!
  29. Load bl30 from NAND, src: 0x00010000, des: 0x01100000, size: 0x0000d600
  30. Load bl31 from NAND, src: 0x00020000, des: 0x10100000, size: 0x00015400
  31. Load bl33 from NAND, src: 0x00038000, des: 0x01000000, size: 0x000a9a00
  32. NOTICE:  BL3-1: v1.0(debug):2e39a99
  33. NOTICE:  BL3-1: Built : 16:36:21, Sep 20 2016
  34. aml log : bl31 normal boot !
  35. [Image: gxl_v1.1.3154-065f772 2016-09-29 14:08:54 yan.wang@droid05]
  36. OPS=0x82
  37. ca 82 37 63 c7 8c 4d 8c d2 e3 1e 65 [0.414512 Inits done]
  38. secure task start!
  39. high task start!
  40. low task start!
  41. INFO:    BL3-1: Initializing runtime services
  42. WARNING: No OPTEE provided by BL2 boot loader
  43. ERROR:   Error initializing runtime service opteed_fast
  44. INFO:    BL3-1: Preparing for EL3 exit to normal world
  45. INFO:    BL3-1: Next image address = 0x1000000
  46. INFO:    BL3-1: Next image spsr = 0x3c9
  47.  
  48.  
  49. U-Boot 2015.01 (Oct 29 2016 - 14:03:28)
  50.  
  51. DRAM:  1 GiB
  52. Relocation Offset is: 36ec9000
  53. register usb cfg[0][1] = 0000000037f5f4f8
  54. vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
  55. vpu: clk_level = 7
  56. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  57. vpp: vpp_init
  58. boot_device_flag : 1
  59. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  60. init bus_cycle=6, bus_timing=7, system=5.0ns
  61. NAND device id: 45 de 94 93 76 50 8 4
  62. detect NAND device: A serials NAND 8GiB SDTNRGAMA-008G
  63. bus_c=6,bus_t=8,sys=5.0ns,T_REA=20,T_RHOH=25
  64. new oob mode
  65. show_phydev_list
  66. 0: nfboot
  67. detect new nand here and new_type:42
  68. NAND CKECK:arg nbbt: valid=1, blk=11, page=0
  69. NAND CKECK:arg fbbt: valid=1, blk=5, page=0
  70. outside dtb: 0000000000000000
  71. using dtb on nand
  72. amlnf_dtb_init_partitions: probe.
  73. NAND CKECK:arg ndtb: valid=1, blk=9, page=17
  74.       Amlogic multi-dtb tool
  75.       Multi dtb detected
  76.       Multi dtb tool version: v2 .
  77.       Support 2 dtbs.
  78.         aml_dt soc: gxl platform: p212 variant: 1g
  79.         dtb 0 soc: gxl   plat: p212   vari: 1g
  80.         dtb 1 soc: gxl   plat: p212   vari: 2g
  81.       Find match dtb: 0
  82. start dts,buffer=0000000033ef68c0,dt_addr=0000000033ef70c0
  83. parts: 11
  84. 00:      logo   0000000002000000 1
  85. 01:  recovery   0000000002000000 1
  86. 02:       rsv   0000000000800000 1
  87. 03:       tee   0000000000800000 1
  88. 04:     crypt   0000000002000000 1
  89. 05:      misc   0000000002000000 1
  90. 06: instaboot   0000000020000000 1
  91. 07:      boot   0000000002000000 1
  92. 08:    system   0000000040000000 1
  93. 09:     cache   0000000020000000 2
  94. 10:      data   ffffffffffffffff 4
  95. cache !!!
  96. NAND CKECK:arg ncnf: valid=1, blk=7, page=0
  97. aml_key_init probe.
  98. NAND CKECK:arg nkey: valid=1, blk=6, page=51
  99. boot_device_flag 1
  100. NAND CKECK:arg nenv: valid=1, blk=10, page=55
  101. NAND CKECK:arg phyp: valid=1, blk=8, page=1
  102. amlnand_phydev_init,1422,phydev->offset=0,phydev->size=1000000
  103. amlnand_phydev_init,1422,phydev->offset=d000000,phydev->size=26000000
  104. amlnand_phydev_init,1422,phydev->offset=33000000,phydev->size=7d000000
  105. amlnand_phydev_init,1422,phydev->offset=b0000000,phydev->size=150000000
  106. nfboot    : 0x000000000000-0x000001000000 :partn=0:single_chip single_plane
  107. nfcache   : 0x00000d000000-0x000026000000 :partn=1:single_chip multi_plane
  108. nfcode    : 0x000033000000-0x00007d000000 :partn=9:single_chip multi_plane
  109. nfdata    : 0x0000b0000000-0x000150000000 :partn=1:single_chip multi_plane
  110. amlnf_logic_init() start
  111. (nfcache), size:26000000
  112. nftl version 1.01.001
  113. size_in_blk 76; total_block 75;
  114. nftl start: size 75, free 12
  115. -blks(75), total_blocks(63)
  116. all block full!!
  117. current block: 69
  118.  (nfcode), size:7d000000
  119. nftl version 1.01.001
  120. size_in_blk 250; total_block 241;
  121. nftl start: size 241, free 26
  122. -blks(240), total_blocks(215)
  123. recover_current_block_mapping invalid page data!!
  124. recover_current_block_mapping invalid page data!!
  125. recover_current_block_mapping invalid page data!!
  126. recover_current_block_mapping invalid page data!!
  127. recover_current_block_mapping invalid page data!!
  128. recover_current_block_mapping invalid page data!!
  129. amlnf_logic_init() done
  130. MMC:   aml_priv->desc_buf = 0x0000000033f26050
  131. aml_priv->desc_buf = 0x0000000033f28370
  132. SDIO Port B: 0, SDIO Port C: 1
  133. uboot env amlnf_env_read : ####
  134. In:    serial
  135. Out:   serial
  136. Err:   serial
  137. reboot_mode=cold_boot
  138. hpd_state=1
  139. [1080p60hz] is invalid for cvbs.
  140. set hdmitx VIC = 16
  141. config HPLL = 2970
  142. HPLL: 0xc000027b
  143. config HPLL done
  144. j = 4  vid_clk_div = 1
  145. hdmitx phy setting done
  146. hdmitx: set enc for VIC: 16
  147. rx version is 1.4 or below  div=10
  148. hdmtix: set audio
  149. [store]To run cmd[amlnf dtb_read 0x1000000 0x40000]
  150. cmd dtb_read:
  151. amlnf_dtb_read: ####
  152. 262144 bytes dtd_read : OK
  153.       Amlogic multi-dtb tool
  154.       Multi dtb detected
  155.       Multi dtb tool version: v2 .
  156.       Support 2 dtbs.
  157.         aml_dt soc: gxl platform: p212 variant: 1g
  158.         dtb 0 soc: gxl   plat: p212   vari: 1g
  159.         dtb 1 soc: gxl   plat: p212   vari: 2g
  160.       Find match dtb: 0
  161. Net:   dwmac.c9410000
  162. wipe_data=successful
  163. wipe_cache=successful
  164. upgrade_step=2
  165. [OSD]load fb addr from dts
  166. [OSD]failed to get fb addr for logo
  167. [OSD]use default fb_addr parameters
  168. [OSD]fb_addr for logo: 0x3d800000
  169. [OSD]load fb addr from dts
  170. [OSD]failed to get fb addr for logo
  171. [OSD]use default fb_addr parameters
  172. [OSD]fb_addr for logo: 0x3d800000
  173. [CANVAS]canvas init
  174. [CANVAS]addr=0x3d800000 width=3840, height=2160
  175. amlkey_init() enter!
  176. amlnf_key_read key data len too much
  177. [EFUSE_MSG]keynum is 4
  178. [BL31]: tee size: 0
  179. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  180. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  181. gpio: pin GPIOAO_2 (gpio 102) value is 1
  182. get_cpu_id flag_12bit=1
  183. saradc - saradc sub-system
  184.  
  185. Usage:
  186. saradc saradc open <channel>            - open a SARADC channel
  187. saradc close    - close the SARADC
  188. saradc getval   - get the value in current channel
  189. saradc get_in_range <min> <max> - return 0 if current value in the range of current channel
  190.  
  191. get_cpu_id flag_12bit=1
  192. Hit Enter or space or Ctrl+C key to stop autoboot -- :  0
  193. (Re)start USB...
  194. USB0:   USB3.0 XHCI init start
  195. Register 2000140 NbrPorts 2
  196. Starting the controller
  197. USB XHCI 1.00
  198. scanning bus 0 for devices... 4 USB Device(s) found
  199.        scanning usb for storage devices... 0 Storage Device(s) found
  200. ** Bad device usb 0 **
  201. card out
  202. emmc/sd response timeout, cmd8, status=0x1ff2800
  203. emmc/sd response timeout, cmd55, status=0x1ff2800
  204. emmc/sd response timeout, cmd1, status=0x1ff2800
  205. ee_gate_off ...
  206. ## Booting Android Image at 0x01080000 ...
  207.       Amlogic multi-dtb tool
  208.       Single dtb detected
  209. load dtb from 0x1000000 ......
  210.    Loading Kernel Image(COMP_NONE) ... OK
  211.    kernel loaded at 0x01080000, end = 0x020204b8
  212.    Loading Ramdisk to 339e9000, end 33eb7049 ... OK
  213.    Loading Device Tree to 000000001fff3000, end 000000001ffff549 ... OK
  214. signature: ����������
  215. fdt_instaboot: no instaboot image
  216.  
  217. Starting kernel ...
  218.  
  219. uboot time: 8181935 us
  220. domain-0 init dvfs: 4
  221. [    0.000000@0] Initializing cgroup subsys cpu
  222. [    0.000000@0] Initializing cgroup subsys cpuacct
  223. [    0.000000@0] Linux version 3.14.29-amlogics905x-gb9b6bc9-dirty (root@user-VirtualBox) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-201
  224. 6.02) ) #11 SMP PREEMPT Fri Feb 3 18:15:25 MSK 2017
  225. [    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  226. [    0.000000@0] no prop version_code
  227. [    0.000000@0] fdt Reserved memory table:
  228. [    0.000000@0]            linux,meson-fb: 0x000000003d100000 - 0x000000003f100000  (32 MiB)
  229. [    0.000000@0]                  linux,di: 0x000000003b300000 - 0x000000003d100000  (30 MiB)
  230. [    0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000003b300000, size 30 MiB
  231. [    0.000000@0]             linux,ion-dev: 0x0000000039300000 - 0x000000003b300000  (32 MiB)
  232. [    0.000000@0]               linux,ppmgr: 0x0000000039300000 - 0x0000000039300000  (0 MiB)
  233. [    0.000000@0]        linux,codec_mm_cma: 0x0000000027800000 - 0x0000000033800000  (192 MiB)
  234. [    0.000000@0]              linux,picdec: 0x0000000039300000 - 0x0000000039300000  (0 MiB)
  235. [    0.000000@0] Reserved memory: incorrect alignment of CMA region
  236. [    0.000000@0]   linux,codec_mm_reserved: 0x0000000035200000 - 0x0000000039300000  (65 MiB)
  237. [    0.000000@0] fdt Reserved memory total:  354 MiB
  238. [    0.000000@0] cma: Reserved 8 MiB at 34800000
  239. [    0.000000@0] psci: probing function IDs from device-tree
  240. [    0.000000@0] PERCPU: Embedded 13 pages/cpu @ffffffc0351a3000 s20928 r8192 d24128 u53248
  241. [    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 244696
  242. [    0.000000@0] Kernel command line: root=/dev/data rootflags=data=writeback rw console=ttyS0,115200n8 console=tty0 no_console_suspend consoleblank=0
  243.  fsck.repair=yes net.ifnames=0 mac=${mac} androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimod
  244. e=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=a8:16:04:c8:43:c6 androidboot.mac=a8
  245. :16:04:c8:43:c6  
  246. [    0.000000@0] logo: osd1
  247. [    0.000000@0] logo: loaded
  248. [    0.000000@0] logo: 0x3d800000
  249. [    0.000000@0] logo: 1080p60hz
  250. [    0.000000@0] vout_serve: 1080p60hz
  251. [    0.000000@0] vout_serve: enable: 1
  252. [    0.000000@0] logo: get hdmimode: 1080p60hz
  253. [    0.000000@0] logo: get cvbsmode: 576cvbs
  254. [    0.000000@0] tv_vout: cvbs performance line = 0
  255. [    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  256. [    0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  257. [    0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  258. [    0.000000@0] Memory: 612308K/996352K available (10146K kernel code, 897K rwdata, 3768K rodata, 1180K init, 5779K bss, 384044K reserved)
  259. [    0.000000@0] Virtual kernel memory layout:
  260. [    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
  261. [    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff804113c800   (    17 MB)
  262. [    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
  263. [    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc03d100000   (   977 MB)
  264. [    0.000000@0]       .init : 0xffffffc001e18000 - 0xffffffc001f3f1c0   (  1181 kB)
  265. [    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001e17a24   ( 13919 kB)
  266. [    0.000000@0]       .data : 0xffffffc001f40000 - 0xffffffc0020204b8   (   898 kB)
  267. [    0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01e16fff]
  268. [    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  269. [    0.000000@0] arch_multi_cluster:0
  270. [    0.000000@0] Preemptible hierarchical RCU implementation.
  271. [    0.000000@0]        RCU debugfs-based tracing is enabled.
  272. [    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  273. [    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  274. [    0.000000@0] NR_IRQS:64 nr_irqs:64 0
  275. [    0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  276. [    0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  277. [    0.000033@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
  278. [    0.000344@0] Console: colour dummy device 80x25
  279. [    0.000989@0] console [tty0] enabled
  280. [    0.001009@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  281. [    0.001033@0] pid_max: default: 32768 minimum: 301
  282. [    0.001138@0] Security Framework initialized
  283. [    0.001169@0] AppArmor: AppArmor initialized
  284. [    0.001219@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  285. [    0.001236@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  286. [    0.003268@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
  287. [    0.003298@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
  288. [    0.003316@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
  289. [    0.003333@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
  290. [    0.006094@0] Initializing cgroup subsys debug
  291. [    0.006115@0] Initializing cgroup subsys freezer
  292. [    0.006160@0] ftrace: allocating 35154 entries in 138 pages
  293. [    0.043579@0] /cpus/cpu@0: Missing clock-frequency property
  294. [    0.043612@0] /cpus/cpu@1: Missing clock-frequency property
  295. [    0.043627@0] /cpus/cpu@2: Missing clock-frequency property
  296. [    0.043643@0] /cpus/cpu@3: Missing clock-frequency property
  297. [    0.043659@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  298. [    0.083467@0] Meson chip version = RevA (21:A - 82:0)
  299. [    0.103546@1] CPU1: Booted secondary processor
  300. [    0.123528@2] CPU2: Booted secondary processor
  301. [    0.143549@3] CPU3: Booted secondary processor
  302. [    0.143620@0] Brought up 4 CPUs
  303. [    0.143668@0] SMP: Total of 4 processors activated.
  304. [    0.144169@0] devtmpfs: initialized
  305. [    0.151258@0] sched: registering cpufreq notifiers for scale-invariant loads
  306. [    0.151344@0] instabooting: 0
  307. [    0.157393@0] xor: measuring software checksum speed
  308. [    0.253414@0]    8regs     :  2291.600 MB/sec
  309. [    0.353426@0]    8regs_prefetch:  2158.800 MB/sec
  310. [    0.453455@0]    32regs    :  2615.200 MB/sec
  311. [    0.553485@0]    32regs_prefetch:  2364.400 MB/sec
  312. [    0.553496@0] xor: using function: 32regs (2615.200 MB/sec)
  313. [    0.553515@0] pinctrl core: initialized pinctrl subsystem
  314. [    0.554113@0] regulator-dummy: no parameters
  315. [    0.554811@0] NET: Registered protocol family 16
  316. [    0.557443@0] cpuidle: using governor menu
  317. [    0.557696@0] aml_vdac_init: module init
  318. [    0.557858@0] register canvas platform driver
  319. [    0.557943@0] register rdma platform driver
  320. [    0.559604@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001f48000
  321. [    0.559649@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  322. [    0.559940@0] DMA: preallocated 256 KiB pool for atomic allocations
  323. [    0.560918@0] software IO TLB [mem 0x25800000-0x25c00000] (4MB) mapped at [ffffffc025800000-ffffffc025bfffff]
  324. [    0.561398@0] aml_i2c version: 20140813
  325. [    0.561619@0] i2c-core: driver [pmu4] using legacy resume method
  326. [    0.561708@0] codec_mm:codec_mm_module_init
  327. [    0.561943@0] aml_watch_point_probe, in
  328. [    0.562293@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  329. [    0.562315@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  330. [    0.562330@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  331. [    0.562529@0] clk_sys: register PLL sys_pll success done
  332. [    0.562549@0] gxl_clk: [ xtal        ] ->clockrate: 24000000Hz
  333. [    0.562562@0] gxl_clk: [ 32Khz       ] ->clockrate: 32000Hz
  334. [    0.562574@0] gxl_clk: [ clk81       ] ->clockrate: 166666666Hz
  335. [    0.562586@0] gxl_clk: [ fixed_pll   ] ->clockrate: 2000000000Hz
  336. [    0.562598@0] gxl_clk: [ fclk_div2   ] ->clockrate: 1000000000Hz
  337. [    0.562610@0] gxl_clk: [ fclk_div3   ] ->clockrate: 666666666Hz
  338. [    0.562622@0] gxl_clk: [ fclk_div4   ] ->clockrate: 500000000Hz
  339. [    0.562634@0] gxl_clk: [ fclk_div5   ] ->clockrate: 400000000Hz
  340. [    0.562646@0] gxl_clk: [ fclk_div7   ] ->clockrate: 285714285Hz
  341. [    0.562680@0] gxl_clk: clock initialization complete
  342. [    0.562882@0] clkmsr: Gxl msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
  343. [    0.565336@0] aml_iomap: amlogic iomap probe done
  344. [    0.566005@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
  345. [    0.567166@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  346. [    0.567628@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  347. [    0.567664@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  348. [    0.567850@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  349. [    0.567878@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  350. [    0.572396@0] codec_mm has 2 memory regions
  351. [    0.572447@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_cma ok
  352. [    0.572470@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_reserved ok
  353. [    0.572586@0] codec_mm has 2 memory regions
  354. [    0.572610@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_cma ok
  355. [    0.572630@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_reserved ok
  356. [    0.574501@0] vpu: driver version: v02
  357. [    0.574544@0] vpu: load vpu_clk: 666667000Hz(7)
  358. [    0.574640@0] vpu: vpu_probe OK
  359. [    0.576381@0] tv_vout: tvout_probe
  360. [    0.576409@0] tv_vout: major number 254 for disp
  361. [    0.576421@0] vout_notify: vout_register_server
  362. [    0.576432@0] tv_vout: register tv module server ok
  363. [    0.576528@0] tv_vout: tvout_probe OK
  364. [    0.577137@0] canvas_probe reg=00000000c8838000,size=400
  365. [    0.577171@0] canvas maped reg_base =ffffff800007e000
  366. [    0.581018@0] rdma_probe
  367. [    0.842007@0] bio: create slab <bio-0> at 0
  368. [    1.004205@0] raid6: int64x1    485 MB/s
  369. [    1.174223@0] raid6: int64x2    717 MB/s
  370. [    1.344283@0] raid6: int64x4   1035 MB/s
  371. [    1.514331@0] raid6: int64x8   1196 MB/s
  372. [    1.684471@0] raid6: neonx1     771 MB/s
  373. [    1.854467@0] raid6: neonx2    1203 MB/s
  374. [    2.024535@0] raid6: neonx4    1567 MB/s
  375. [    2.194602@0] raid6: neonx8    1729 MB/s
  376. [    2.194613@0] raid6: using algorithm neonx8 (1729 MB/s)
  377. [    2.194624@0] raid6: using intx1 recovery algorithm
  378. [    2.195429@0] SCSI subsystem initialized
  379. [    2.195928@0] usbcore: registered new interface driver usbfs
  380. [    2.196041@0] usbcore: registered new interface driver hub
  381. [    2.196170@0] usbcore: registered new device driver usb
  382. [    2.197087@0] i2c-gpio i2c_gpio.38: using pins 172 (SDA) and 173 (SCL)
  383. [    2.197227@0] Linux video capture interface: v2.00
  384. [    2.197428@0] pps_core: LinuxPPS API ver. 1 registered
  385. [    2.197442@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  386. [    2.197521@0] PTP clock support registered
  387. [    2.198126@0] hdmitx: system: amhdmitx_init
  388. [    2.198145@0] hdmitx: system: Ver: 2014May6
  389. [    2.198316@0] hdmitx: system: amhdmitx_probe
  390. [    2.198673@0] hdmitx: system: not find match init-data
  391. [    2.198691@0] hdmitx: system: not find match pwr-ctl
  392. [    2.198703@0] hdmitx hpd irq = 89
  393. [    2.199162@0] hdmitx20: Mapped PHY: 0xc0800000
  394. [    2.199185@0] hdmitx20: Mapped PHY: 0xc1104400
  395. [    2.199212@0] hdmitx20: Mapped PHY: 0xc8100000
  396. [    2.199224@0] hdmitx20: Mapped PHY: 0xc8834000
  397. [    2.199235@0] hdmitx20: Mapped PHY: 0xc883a000
  398. [    2.199247@0] hdmitx20: Mapped PHY: 0xc883c000
  399. [    2.199261@0] hdmitx20: Mapped PHY: 0xd0100000
  400. [    2.199272@0] hdmitx20: Mapped PHY: 0xda83a000
  401. [    2.199290@0] hdmitx: alread display in uboot 0x10
  402. [    2.199319@0] avmute set to 1
  403. [    2.199762@0] vout_serve: vout_init_module
  404. [    2.199904@0] tv_vout: tv_set_current_vmode[759]fps_target_mode=16
  405. [    2.199920@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  406. [    2.199939@0] tv_vout: already display in uboot
  407. [    2.199950@0] vout_serve: vinfo mode is: 1080p60hz
  408. [    2.199960@0] vout_serve: init mode 1080p60hz
  409. [    2.200057@0] vout_serve: create vout attribute OK
  410. [    2.200071@0] vout_serve: meson_vout_probe OK
  411. [    2.200257@0] logo: logo_init
  412. [    2.200518@0] osd_rdma: osd_rdma_init: rdma_table p=0x34841000,op=0x34841000 , v=0xffffff8000199000
  413. [    2.200539@0] osd_rdma: osd rdma request irq as second interrput function!
  414. [    2.200715@0] Advanced Linux Sound Architecture Driver Initialized.
  415. [    2.201353@0] NetLabel: Initializing
  416. [    2.201372@0] NetLabel:  domain hash size = 128
  417. [    2.201383@0] NetLabel:  protocols = UNLABELED CIPSOv4
  418. [    2.201435@0] NetLabel:  unlabeled traffic allowed by default
  419. [    2.203412@0] Switched to clocksource arch_sys_counter
  420. [    2.206419@0] hdmitx: system: irq 80000002
  421. [    2.216418@0] FS-Cache: Loaded
  422. [    2.216573@0] AppArmor: AppArmor Filesystem Enabled
  423. [    2.227508@0] NET: Registered protocol family 2
  424. [    2.228006@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  425. [    2.228097@0] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  426. [    2.228235@0] TCP: Hash tables configured (established 8192 bind 8192)
  427. [    2.228306@0] TCP: reno registered
  428. [    2.228322@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  429. [    2.228355@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  430. [    2.228523@0] NET: Registered protocol family 1
  431. [    2.228774@0] RPC: Registered named UNIX socket transport module.
  432. [    2.228791@0] RPC: Registered udp transport module.
  433. [    2.228802@0] RPC: Registered tcp transport module.
  434. [    2.228812@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  435. [    2.229027@0] aml_wifi wifi.33: [wifi_dev_probe] no power_on_pin2
  436. [    2.229043@0] aml_wifi wifi.33: [wifi_dev_probe] set pwm as 32k output
  437. [    2.229098@0] aml_wifi wifi.33: [wifi_dev_probe] interrupt_pin=241
  438. [    2.229113@0] aml_wifi wifi.33: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  439. [    2.229130@0] aml_wifi wifi.33: [wifi_dev_probe] power_on_pin=240
  440. [    2.229143@0] aml_wifi wifi.33: [wifi_dev_probe] clock_32k_pin=0
  441. [    2.229543@0] aml_wifi wifi.33: [wifi_setup_dt] wifi_setup_dt
  442. [    2.229592@0] aml_wifi wifi.33: [wifi_setup_dt] interrupt_pin(241)
  443. [    2.229615@0] aml_wifi wifi.33: [wifi_setup_dt] power_on_pin(240)
  444. [    2.229925@0] Unpacking initramfs...
  445. [    2.439269@0] Freeing initrd memory: 4920K (ffffffc0339e9000 - ffffffc033eb7000)
  446. [    2.442660@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  447. [    2.442738@0] audit: initializing netlink subsys (disabled)
  448. [    2.442791@0] audit: type=2000 audit(2.410:1): initialized
  449. [    2.443686@0] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  450. [    2.450515@0] VFS: Disk quotas dquot_6.5.2
  451. [    2.450768@0] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  452. [    2.453823@0] NFS: Registering the id_resolver key type
  453. [    2.453872@0] Key type id_resolver registered
  454. [    2.453884@0] Key type id_legacy registered
  455. [    2.453902@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  456. [    2.454581@0] msgmni has been set to 1605
  457. [    2.455858@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  458. [    2.455890@0] io scheduler noop registered (default)
  459. [    2.455902@0] io scheduler deadline registered
  460. [    2.456085@0] io scheduler cfq registered
  461. [    2.457657@0] meson-rng c8834000.rng: hwrng registered
  462. [    2.461479@0] loop: module loaded
  463. [    2.462428@0] mtdoops: mtd device (mtddev=name/number) must be supplied
  464. [    2.463816@0] tun: Universal TUN/TAP device driver, 1.6
  465. [    2.463841@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  466. [    2.471109@0] libphy: stmmac: probed
  467. [    2.471136@0] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
  468. [    2.471589@0] PPP generic driver version 2.4.2
  469. [    2.471876@0] NET: Registered protocol family 24
  470. [    2.472027@0] usbcore: registered new interface driver cdc_ether
  471. [    2.472142@0] usbcore: registered new interface driver net1080
  472. [    2.472243@0] usbcore: registered new interface driver cdc_subset
  473. [    2.472342@0] usbcore: registered new interface driver zaurus
  474. [    2.472468@0] usbcore: registered new interface driver cdc_ncm
  475. [    2.472979@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  476. [    2.473132@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  477. [    2.473150@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  478. [    2.473378@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  479. [    2.473816@0] usbcore: registered new interface driver cdc_acm
  480. [    2.473839@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  481. [    2.473957@0] usbcore: registered new interface driver usb-storage
  482. [    2.474197@0] usbcore: registered new interface driver usbserial
  483. [    2.474305@0] usbcore: registered new interface driver usbserial_generic
  484. [    2.474396@0] usbserial: USB Serial support registered for generic
  485. [    2.474504@0] usbcore: registered new interface driver pl2303
  486. [    2.474593@0] usbserial: USB Serial support registered for pl2303
  487. [    2.475196@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001ec000
  488. [    2.475457@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  489. [    2.475494@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001ee080
  490. [    2.475995@0] mousedev: PS/2 mouse device common for all mice
  491. [    2.476428@0] usbcore: registered new interface driver xpad
  492. [    2.476697@0] i2c /dev entries driver
  493. [    2.477070@0] usbcore: registered new interface driver uvcvideo
  494. [    2.477090@0] USB Video Class driver (1.1.1)
  495. [    2.477959@0] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  496. [    2.478536@0] CPUidle arm64: cpuidle init start!!
  497. [    2.478977@0] ledtrig-cpu: registered to indicate activity on CPUs
  498. [    2.479152@0] hidraw: raw HID events driver (C) Jiri Kosina
  499. [    2.479416@0] usbcore: registered new interface driver usbhid
  500. [    2.479433@0] usbhid: USB HID core driver
  501. [    2.480256@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001f04c0
  502. [    2.480302@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  503. [    2.480332@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  504. [    2.547059@0] hdmitx: plugin
  505. [    2.679428@0] hdmitx: edid: check sum valid
  506. [    2.679430@0] hdmitx: edid: check sum valid
  507. [    2.679434@0] hdmitx: edid: blk0 raw data
  508. [    2.679474@0] 00ffffffffffff0036743000010000000a160103807341780acf74a3574cb023
  509. [    2.679474@0] 09484c21080081804540614095000101010101010101023a801871382d40582c
  510. [    2.679474@0] 4500c48e2100001e662150b051001b3040703600c48e2100001e000000fc004d
  511. [    2.679474@0] 537461722044656d6f0a2020000000fd00324b1e5017000a20202020202001f1
  512. [    2.679474@0]
  513. [    2.679474@0]
  514. [    2.679476@0] hdmitx: edid: blk1 raw data
  515. [    2.679514@0] 02032cf24d010304050790121314169f202226090707111750830100006e030c
  516. [    2.679514@0] 002000b82d20c004014100008c0ad08a20e02d10103e9600c48e210000188c0a
  517. [    2.679514@0] d090204031200c405500c48e21000018011d00bc52d01e20b8285540c48e2100
  518. [    2.679514@0] 001e011d80d0721c1620102c2580c48e2100009e000000000000000000000008
  519. [    2.679514@0]
  520. [    2.679514@0]
  521. [    2.679518@0] EDID Parser:
  522. [    2.679587@0] hdmitx: edid: find IEEEOUT
  523. [    2.679591@0] hdmitx: edid: check sum valid
  524. [    2.679592@0] hdmitx: edid: check sum valid
  525. [    2.679597@0] hdmitx: update RX hdr info 0
  526. [    2.681623@0] hdmitx: ddc rd8b error 0x3a 0x00 0x00
  527. [    2.683666@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
  528. [    2.683673@0] hdmitx: video: get current mode: 1080p60hz
  529. [    2.683674@0] hdmitx: update rx hdr info 0
  530. [    2.683694@0] hdmitx: get ext_name (null)
  531. [    2.683702@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  532. [    2.683708@0] hdmtix: set audio
  533. [    2.683718@0] hdmitx tx_aud_src = 0
  534. [    2.683744@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
  535. [    2.683747@0] hdmitx aud_n_para = 6144
  536. [    2.683765@0] hdmitx set channel status
  537. [    4.217977@2] console [ttyS0] enabled
  538. [    4.222067@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f24c0
  539. [    4.228702@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  540. [    4.238707@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  541. [    4.246605@0] dwc_otg_driver_probe host only, not probe usb_otg!!!
  542. [    4.253154@0] hdmitx: system: hdmitx_hdcp_init
  543. [    4.257327@0] ESM HLD: Initializing...
  544. [    4.260836@0] ESM HLD: Registering device range 'esm'...
  545. [    4.266113@0] ESM HLD: Device range 'esm' has been registered.
  546. [    4.271904@0] ESM HLD: Creating class /sys/class/elliptic...
  547. [    4.277583@0] ESM HLD: The class /sys/class/elliptic has been created.
  548. [    4.283958@0] ESM HLD: Creating device 'esm'...
  549. [    4.288672@0] ESM HLD: Device 'esm' has been created.
  550. [    4.293446@0] ESM HLD: Done initializing the HLD driver.
  551. INFO:    HDCP22 key read fail!
  552. INFO:    p1d 0
  553. INFO:    pd1 0
  554. [    4.314764@0] aml_vrtc rtc.32: rtc core: registered aml_vrtc as rtc0
  555. [    4.316191@0] secmon has 1 memory regions
  556. [    4.319516@0] secmon: share in base: 0xffffff80001fc000, share out base: 0xffffff80001fe000
  557. [    4.327751@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
  558. [    4.334742@0] secmon: probe done
  559. [    4.338249@0] storage: storage in base: 0xffffff8001600000
  560. [    4.343342@0] storage: storage out base: 0xffffff8001680000
  561. [    4.348871@0] storage: storage block base: 0xffffff8001700000
  562. [    4.354584@0] storage: probe done!
  563. [    4.358471@0] aml_sd_emmc_probe: line 3558
  564. [    4.361974@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  565. [    4.371830@0] aml_sd_emmc_reg_init 1146
  566. [    4.375265@0] get property:                ocr_avail, value:0x00200080
  567. [    4.381637@0] get property:                    f_min, value:300000
  568. [    4.387795@0] get property:                    f_max, value:100000000
  569. [    4.394150@0] get property:             max_req_size, value:0x00020000
  570. [    4.400616@0] get property:                  pinname, str:emmc
  571. [    4.406415@0] get property:                card_type, value:1
  572. [    4.412094@0] get property:                gpio_dat3, str:
  573. [    4.417525@0] get property:                 hw_reset, str:
  574. [    4.423002@0] emmc:pdata->caps = c0000d47
  575. [    4.426930@0] emmc:pdata->caps2 = 18060
  576. [    4.430723@0] storage 2, boot 2
  577. [    4.433824@0] get_storage_dev return 2
  578. [    4.437620@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() fail!
  579. [    4.443075@2] aml_sd_emmc_probe: line 3558
  580. [    4.447379@2] aml_sd_emmc_reg_init 1146
  581. [    4.450975@2] get property:                ocr_avail, value:0x00200080
  582. [    4.457376@2] get property:                    f_min, value:400000
  583. [    4.463515@2] get property:                    f_max, value:100000000
  584. [    4.469872@2] get property:             max_req_size, value:0x00020000
  585. [    4.476346@2] get property:                   irq_in, value:3
  586. [    4.482033@2] get property:                  irq_out, value:5
  587. [    4.487740@2] get property:                  gpio_cd, str:
  588. [    4.493160@2] get property:                  pinname, str:sd
  589. [    4.498780@2] get property:                 jtag_pin, str:
  590. [    4.504211@2] get property:                card_type, value:5
  591. [    4.509893@2] get property:                gpio_dat3, str:
  592. [    4.515347@2] sd:pdata->caps = 7
  593. [    4.518516@2] sd:pdata->caps2 = 0
  594. [    4.554608@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  595. [    4.554617@2] [aml_is_card_insert] card OUT
  596. [    4.554678@1] [aml_is_card_insert] card OUT
  597. [    4.563119@0] aml_sd_emmc_probe: line 3558
  598. [    4.567386@0] aml_sd_emmc_reg_init 1146
  599. [    4.571019@0] get property:                ocr_avail, value:0x00200080
  600. [    4.577418@0] get property:                    f_min, value:400000
  601. [    4.583538@0] get property:                    f_max, value:200000000
  602. [    4.589930@0] get property:             max_req_size, value:0x00020000
  603. [    4.596392@0] get property:                  pinname, str:sdio
  604. [    4.602178@0] get property:                card_type, value:3
  605. [    4.607905@0] sdio:pdata->caps = 7810f
  606. [    4.611562@0] sdio:pdata->caps2 = 0
  607. [    4.653422@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  608. [    4.653935@0] ion_dev has 1 memory regions
  609. [    4.660527@0] fb: osd_init_module
  610. [    4.661066@0] fb: viu vsync irq: 35
  611. [    4.664416@0] meson-fb has 1 memory regions
  612. [    4.668597@0] meson-fb meson-fb.17: assigned reserved memory node linux,meson-fb ok
  613. [    4.676147@0] fb: osd_probe vinfo:ffffffc001fc1cf8
  614. [    4.680884@0] fb: init fbdev bpp is:32
  615. [    4.685243@0] fb: Frame buffer memory assigned at
  616. [    4.685243@0] fb:  0, phy: 0x000000003d100000, vir:0xffffff8001900000, size=24576K
  617. [    4.685243@0]
  618. [    4.685246@0] fb: ---------------clear fb0 memory ffffff8001900000
  619. [    4.696243@0] fb: osd[0] canvas.idx =0x40
  620. [    4.696245@0] fb: osd[0] canvas.addr=0x3d100000
  621. [    4.696246@0] fb: osd[0] canvas.width=7680
  622. [    4.696248@0] fb: osd[0] canvas.height=3240
  623. [    4.696249@0] fb: osd[0] frame.width=1920
  624. [    4.696251@0] fb: osd[0] frame.height=1080
  625. [    4.744067@0] Console: switching to colour frame buffer device 240x67
  626. [    4.817981@0] fb: osd probe OK
  627. [    4.818755@0] ge2d: ge2d_init_module
  628. [    4.822073@0] ge2d: ge2d_dev major:243
  629. [    4.826207@0] ge2d: ge2d clock is 400 MHZ
  630. [    4.829744@0] ge2d: ge2d: pdev=ffffffc0265cf000, irq=182, rstc=0xffffffc0265867c0, clk=ffffffc0264bbd00
  631. [    4.839139@0] ge2d: mapped phy: 0xd0160000
  632. [    4.843113@0] ge2d: ge2d start monitor
  633. [    4.846900@2] ge2d: ge2d workqueue monitor start
  634. [    4.847336@0] codec:Amlogic A/V streaming port init
  635. [    4.849517@0] codec:get gate demux control ok ffffffc025492e80
  636. [    4.849523@0] codec:get gate parser_top control ok ffffffc025492840
  637. [    4.849529@0] codec:get gate vpu_intr control ok ffffffc02491d340
  638. [    4.849535@0] codec:get gate vdec control ok ffffffc02491df00
  639. [    4.850313@0] codec:[tsync_pcr_init]init success.
  640. [    4.850317@0] codec:amvideocap_init_module
  641. [    4.850488@0] codec:amvideocap_probe,amvideocap
  642. [    4.850492@0] codec:use cma buf.
  643. [    4.850495@0] codec:amvideocap_dev_register
  644. [    4.852642@0] amvenc_avc_probe -- reserved memory config fail.
  645. [    4.852647@0] amvenc_avc - cma memory pool size: 40 MB
  646. [    4.852670@0] encode_wq_init.
  647. [    4.852675@0] encode start monitor.
  648. [    4.852760@3] encode workqueue monitor start.
  649. [    4.853445@0] jpegenc module init
  650. [    4.853915@0] codec:picdec_driver_probe called.
  651. [    4.853919@0] picdec has 1 memory regions
  652. [    4.853956@0] codec:picdec_driver_probe done.
  653. [    4.855326@0] codec:create_ge2d_work_queue video task ok
  654. [    4.855849@0] codec:used fix clk for vdec clk source!
  655. [    4.855858@0] codec:register clk_set_setting cpu[33]
  656. [    4.856244@0] vpu_init
  657. [    4.856247@0] The chip is not support hevc encoder
  658. [    4.856250@0] DI: di_module_init ok.
  659. [    4.856256@0] DI: di_module_init: major 237
  660. [    4.856747@0] DI: di_probe
  661. [    4.857029@0] deinterlace has 1 memory regions
  662. [    4.857081@0] deinterlace deinterlace.27: assigned reserved memory node linux,di ok
  663. [    4.857109@0] di_irq:78,timerc_irq:38
  664. [    4.857276@0] rdma_register, rdma_table_addr ffffff8000431000 rdma_table_addr_phy 34848000 reg_buf ffffffc026510000
  665. [    4.857279@0] rdma_register success, handle 1 table_size 8192
  666. [    4.857280@0] DI: di_probe allocate rdma channel 1.
  667. [    4.857285@0] DI: DI hw version 2.
  668. [    4.857298@0] 0x000000db:Y=db,U=0,V=0
  669. [    4.857301@0] 0x000000dc:Y=dc,U=0,V=0
  670. [    4.857303@0] 0x000000dd:Y=dd,U=0,V=0
  671. [    4.857304@0] 0x000000de:Y=de,U=0,V=0
  672. [    4.857306@0] 0x000000df:Y=df,U=0,V=0
  673. [    4.857309@0] 0x000000e0:Y=e0,U=0,V=0
  674. [    4.857310@0] 0x000000e1:Y=e1,U=0,V=0
  675. [    4.857312@0] 0x000000e2:Y=e2,U=0,V=0
  676. [    4.857314@0] 0x000000e3:Y=e3,U=0,V=0
  677. [    4.857316@0] 0x000000f0:Y=f0,U=0,V=0
  678. [    4.857320@0] 0x000000f1:Y=f1,U=0,V=0
  679. [    4.857321@0] 0x000000f2:Y=f2,U=0,V=0
  680. [    4.857323@0] 0x000000f3:Y=f3,U=0,V=0
  681. [    4.857325@0] 0x000000f4:Y=f4,U=0,V=0
  682. [    4.857327@0] 0x000000f5:Y=f5,U=0,V=0
  683. [    4.857329@0] 0x000000f6:Y=f6,U=0,V=0
  684. [    4.857332@0] 0x000000f7:Y=f7,U=0,V=0
  685. [    4.857334@0] 0x000000f8:Y=f8,U=0,V=0
  686. [    4.857336@0] 0x000000f9:Y=f9,U=0,V=0
  687. [    4.857338@0] 0x000000fa:Y=fa,U=0,V=0
  688. [    4.857340@0] 0x000000fb:Y=fb,U=0,V=0
  689. [    4.857341@0] 0x000000fc:Y=fc,U=0,V=0
  690. [    4.857512@0] DI: di_probe here.
  691. [    4.857981@0] efusekeynum: 4
  692. [    4.857991@0] efusekeyname:             mac  offset:     0   size:     6
  693. [    4.857997@0] efusekeyname:          mac_bt  offset:     6   size:     6
  694. [    4.858002@0] efusekeyname:        mac_wifi  offset:    12   size:     6
  695. [    4.858008@0] efusekeyname:            usid  offset:    18   size:    16
  696. [    4.858366@0] efuse efuse.10: probe OK!
  697. [    4.858804@0] key unify config unifykey-num is 14
  698. [    4.858853@0] key unify fact unifykey-num is 14
  699. [    4.858859@0] aml_unifykeys_probe:1273=============unifykey_devno:eb00000
  700. [    4.859212@0] 6unifykey: device unifykeys created ok
  701. [    4.859356@0] 6aml_unifykeys_init done!
  702. [    4.859360@0] PPMGRDRV: warn: ppmgr module init func called
  703. [    4.859518@0] PPMGRDRV: err: ppmgr_driver_probe called
  704. [    4.859522@0] ppmgr has 1 memory regions
  705. [    4.859566@0] PPMGRDRV: info: ppmgr_dev major:234
  706. [    4.859910@0] PPMGRDRV: info: ppmgr_probe done
  707. [    4.860395@0] amlogic rfkill init
  708. [    4.860515@0] enter bt_probe of_node
  709. [    4.860536@0] not get gpio_en
  710. [    5.273986@0] power on valid level is high
  711. [    5.273986@0] ionvideo-000: V4L2 device registered as video13
  712. [    5.281511@0] ionvid: info: Video Technology Magazine Ion Video
  713. [    5.287472@0] ionvid: info: Capture Board ver 1.0 successfully loaded
  714. [    5.293799@0] audio_dsp: [dsp]register dsp to char divece(257)
  715. [    5.300451@0] amaudio: amaudio: driver amaudio succuess!
  716. [    5.305266@0] amlvid:err: amlvideo_init called
  717. [    5.309024@0] amlvid:err: amlvideo_create_instance called
  718. [    5.316000@0] amlvid:err: v4l2_dev.name=:amlvideo-000
  719. [    5.321006@0] amlvideo-000: V4L2 device registered as video10
  720. [    5.326916@0] [RX]-hdmirx: hdmirx_init.
  721. [    5.330464@0] ESM HLD: Initializing...
  722. [    5.334002@0] ESM HLD: Registering device range 'esm_rx'...
  723. [    5.339449@0] ESM HLD: Device range 'esm_rx' has been registered.
  724. [    5.345456@0] ESM HLD: Creating class /sys/class/elliptic_rx...
  725. [    5.351470@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
  726. [    5.358064@0] ESM HLD: Creating device 'esm_rx'...
  727. [    5.363030@0] ESM HLD: Device 'esm_rx' has been created.
  728. [    5.368116@0] ESM HLD: Done initializing the HLD driver.
  729. [    5.373289@0] [viuin..]viuin_init_module viuin module init
  730. [    5.379263@0] [viuin..]viuin_probe probe ok.
  731. [    5.383041@0] module init
  732. [    5.386658@0]
  733. [    5.386658@0]  VECM probe start
  734. [    5.393705@0] aml_vecm_probe: ok
  735. [    5.397437@0] nandphy: storage 2, boot 2
  736. [    5.397437@0]
  737. [    5.404190@0] nandphy: get_storage_dev return 2
  738. [    5.404190@0]
  739. [    5.411498@0] nandphy: Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  740. [    5.418262@0] nandphy: ######STS IRQ mode for nand driver
  741. [    5.423477@0] nandphy: NAND device id: 45 de 94 93 76 50 8 4
  742. [    5.429009@0] nandphy: detect NAND device: A serials NAND 8GiB SDTNRGAMA-008G
  743. [    5.487785@0] nandphy: clk_reg = 81000245
  744. [    5.491653@0] nandphy: bus_c=6,bus_t=7,sys=5.0ns,T_REA=20,T_RHOH=25
  745. [    5.496267@0] nandphy: new oob mode
  746. [    5.505621@0] nandphy: NAND CKECK:arg nbbt:arg_valid=1,blk_addr=11,page_addr=0
  747. [    5.517353@0] nandphy: NAND CKECK:arg ncnf:arg_valid=1,blk_addr=7,page_addr=0
  748. [    5.554669@0] nandphy: NAND CKECK:arg phyp:arg_valid=1,blk_addr=8,page_addr=1
  749. [    5.593265@0] nandphy: NAND CKECK:arg nkey:arg_valid=1,blk_addr=6,page_addr=51
  750. [    5.639828@0] nandphy: NAND CKECK:arg ndtb:arg_valid=1,blk_addr=9,page_addr=17
  751. [    5.692721@0] nandphy: NAND CKECK:arg nenv:arg_valid=1,blk_addr=10,page_addr=55
  752. [    5.701616@0] nandphy: nfboot    :
  753. [    5.705984@0] nandphy: off:0x000000000000-0x000001000000 :partn=0:single_chip single_plane
  754. [    5.713018@0] nandphy: nfcache   :
  755. [    5.717497@0] nandphy: off:0x00000d000000-0x000026000000 :partn=1:single_chip multi_plane
  756. [    5.724713@0] nandphy: nfcode    :
  757. [    5.729338@0] nandphy: off:0x000033000000-0x00007d000000 :partn=9:single_chip multi_plane
  758. [    5.736676@0] nandphy: nfdata    :
  759. [    5.741448@0] nandphy: off:0x0000b0000000-0x000150000000 :partn=1:single_chip multi_plane
  760. [    5.751610@0] saradc c1108680.saradc: initialized by BL30
  761. [    5.756766@0] saradc c1108680.saradc: calibration start:
  762. [    5.761851@0] saradc c1108680.saradc: nominal=0, value=4
  763. [    5.767018@0] saradc c1108680.saradc: nominal=256, value=250
  764. [    5.772652@0] saradc c1108680.saradc: nominal=512, value=498
  765. [    5.778228@0] saradc c1108680.saradc: nominal=768, value=748
  766. [    5.783833@0] saradc c1108680.saradc: nominal=1023, value=995
  767. [    5.789494@0] saradc c1108680.saradc: calibration end: coef=4211
  768. [    5.795742@0] remote: Driver init
  769. [    5.800650@0] remote: platform_data g_remote_ao_offset=580
  770. [    5.805561@0] remote: platform_data irq =228
  771. [    5.810350@0] remote: set drvdata completed
  772. [    5.816392@0] remote: device_create_file completed
  773. [    5.821584@0] input: aml_keypad as /devices/meson-remote.12/input/input0
  774. [    5.827950@0] remote: input_register_device completed
  775. [    5.834603@0] remote: set_remote_mode[74]
  776. [    5.839730@0] remote: remote config major:228
  777. [    5.844994@0] remote: physical address:0x2653a000
  778. [    5.850572@0] gpio-key gpio_keypad.48: gpio_key: 0 name(power) pin()
  779. [    5.856346@0] gpio-key gpio_keypad.48: amlogic_gpio_name_map_num pin 0!::
  780. [    5.862970@0] gpio-key gpio_keypad.48: gpio_key: 0 power(147)
  781. [    5.868747@0] gpio-key gpio_keypad.48: start setup_timer
  782. [    5.873939@0] gpio-key gpio_keypad.48: power key(116) registed.
  783. [    5.880068@0] input: gpio_keypad as /devices/gpio_keypad.48/input/input1
  784. [    5.886791@0] gpio-key gpio_keypad.48: gpio keypad register input device completed.
  785. [    5.894073@0] input input1: gpio keypad major:227
  786. [    5.900002@0] Sensor: lsm303d_init
  787. [    5.905343@0] Sensor: stk8313_init
  788. [    5.910359@0] Sensor: stk831x_init
  789. [    5.915369@0] Sensor: mxc622x_acc_init
  790. [    5.920369@0] Sensor: mxc6255xc_acc_init
  791. [    5.925311@0] Sensor: l3gd20_gyr_init
  792. [    5.931805@0] cpuinfo: probe done
  793. [    5.937045@0] defendkey c8834500.defendkey: defendkey_devno:e100000
  794. [    5.942764@0] defendkey c8834500.defendkey: defendkey: device defendkey created ok
  795. [    5.950254@0] defendkey: driver init
  796. [    5.955925@0] input: cec_input as /devices/virtual/input/input2
  797. [    5.961326@0] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  798. [    5.967189@0] cectx aocec: aml_cec_probe(): no hhi reg resource
  799. [    5.973143@0] cectx aocec: aml_cec_probe(): can't find hdmirx
  800. [    5.978720@0] input input1: key 116 up
  801. [    5.984750@0] cec: wake up flag:0
  802. [    5.990182@0] aml_aes_dma c883e000.aml_aes: Aml AES_dma
  803. [    5.995856@0] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma
  804. [    6.001629@0] aml_sha_dma c883e000.aml_sha: Aml SHA1/SHA224/SHA256 dma
  805. [    6.009453@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  806. [    6.018024@0] aml_pcm_dai: pcm mode detection =1
  807. [    6.023571@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
  808. [    6.030139@0] aml_spdif_dai: set normal 512 fs /4 fs
  809. [    6.035240@0] aml_audio_hw: IEC958 16bit
  810. [    6.040171@0] hdmitx: audio: aout notify rate 48000
  811. [    6.045122@0] hdmitx: audio: aout notify size 16
  812. [    6.049982@0] hdmitx: audio: aout notify format CT_PCM
  813. [    6.054905@0] hdmtix: set audio
  814. [    6.059699@0] hdmitx tx_aud_src = 0
  815. [    6.064569@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
  816. [    6.069489@0] hdmitx aud_n_para = 6144
  817. [    6.074412@0] hdmitx set channel status
  818. [    6.079357@0] hdmitx: audio: Audio Type: PCM
  819. [    6.084242@0] hdmitx: audio: set audio param
  820. [    6.293644@0] aml_snd_card: headphone detection disable=1
  821. [    6.298924@0] aml_snd_m8_card aml_m8_snd.47: T9015-audio-hifi <-> I2S.40 mapping ok
  822. [    6.306398@0] aml_snd_m8_card aml_m8_snd.47: dit-hifi <-> SPDIF.41 mapping ok
  823. [    6.312974@0] aml_pcm: enter aml_pcm_new dai->name: PCM.42 dai->id: 0
  824. [    6.319508@0] aml_snd_m8_card aml_m8_snd.47: pcm2bt-pcm <-> PCM.42 mapping ok
  825. [    6.326393@0] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTL
  826. [    6.333949@0] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  827. [    6.342756@0] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTR
  828. [    6.350318@0] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  829. [BL31]: tee size: 0
  830. [BL31]: tee size: 0
  831. [BL31]: tee size: 0
  832. [BL31]: tee size: 0
  833. [    6.465113@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
  834. WARNING: Unimplemented Sip Call: 0x82000036
  835. [    6.476688@0] GACT probability NOT on
  836. [    6.481568@0] Mirror/redirect action on
  837. [    6.486526@0] u32 classifier
  838. [    6.491355@0]     Actions configured
  839. [    6.496222@0] Netfilter messages via NETLINK v0.30.
  840. [    6.501120@0] nf_conntrack version 0.5.0 (6422 buckets, 25688 max)
  841. [    6.507077@0] ctnetlink v0.93: registering with nfnetlink.
  842. [    6.512644@0] xt_time: kernel timezone is -0000
  843. [    6.517805@0] ipip: IPv4 over IPv4 tunneling driver
  844. [    6.523744@0] ip_tables: (C) 2000-2006 Netfilter Core Team
  845. [    6.528907@0] arp_tables: (C) 2002 David S. Miller
  846. [    6.533952@0] TCP: cubic registered
  847. [    6.538893@0] Initializing XFRM netlink socket
  848. [    6.544753@0] NET: Registered protocol family 10
  849. [    6.550834@0] mip6: Mobile IPv6
  850. [    6.555908@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
  851. [    6.561108@0] sit: IPv6 over IPv4 tunneling driver
  852. [    6.567534@0] NET: Registered protocol family 17
  853. [    6.572659@0] NET: Registered protocol family 15
  854. [    6.577797@0] Bridge firewalling registered
  855. [    6.582776@0] l2tp_core: L2TP core driver, V2.0
  856. [    6.587709@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  857. [    6.592629@0] l2tp_netlink: L2TP netlink interface
  858. [    6.597501@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  859. [    6.603496@0] l2tp_debugfs: L2TP debugfs support
  860. [    6.608432@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  861. [    6.614610@0] NET: Registered protocol family 35
  862. [    6.619772@0] Key type dns_resolver registered
  863. [    6.626572@0] Registering SWP/SWPB emulation handler
  864. [    6.633996@0] bio: create slab <bio-1> at 1
  865. [    6.640187@0] Btrfs loaded
  866. [    6.645440@0] BTRFS: selftest: Running btrfs free space cache tests
  867. [    6.651169@0] BTRFS: selftest: Running extent only tests
  868. [    6.656532@0] BTRFS: selftest: Running bitmap only tests
  869. [    6.661709@0] BTRFS: selftest: Running bitmap and extent tests
  870. [    6.667533@0] BTRFS: selftest: Free space cache tests finished
  871. [    6.673282@0] BTRFS: selftest: Running extent buffer operation tests
  872. [    6.679401@0] BTRFS: selftest: Running btrfs_split_item tests
  873. [    6.689419@0] BTRFS: selftest: Running find delalloc tests
  874. [    6.903696@0] BTRFS: selftest: Running btrfs_get_extent tests
  875. [    6.908969@0] BTRFS: selftest: Running hole first btrfs_get_extent test
  876. [    6.993505@0] AppArmor: AppArmor sha1 policy hashing enabled
  877. [    6.998506@0] regulator-dummy: disabling
  878. [    7.705473@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  879. [    7.710434@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  880. [    7.718602@2] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  881. [    7.724343@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  882. [    7.731107@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  883. [    7.738450@2] usb usb1: Product: xHCI Host Controller
  884. [    7.743502@2] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  885. [    7.749046@2] usb usb1: SerialNumber: xhci-hcd.0.auto
  886. [    7.754812@1] hub 1-0:1.0: USB hub found
  887. [    7.759967@1] hub 1-0:1.0: 2 ports detected
  888. [    7.765309@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  889. [    7.770447@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  890. [    7.778350@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  891. [    7.785103@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  892. [    7.792421@1] usb usb2: Product: xHCI Host Controller
  893. [    7.797635@1] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  894. [    7.803030@1] usb usb2: SerialNumber: xhci-hcd.0.auto
  895. [    7.808823@0] hub 2-0:1.0: USB hub found
  896. [    7.814085@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  897. [    7.821597@0] console [netcon0] enabled
  898. [    7.826875@0] netconsole: network logging started
  899. [    7.832071@0] aml_vrtc rtc.32: setting system clock to 2015-01-01 00:00:16 UTC (1420070416)
  900. [    7.840993@0] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
  901. [    7.846394@0] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
  902. [    7.854300@0] gxbb_pm: enter meson_pm_probe!
  903. [    7.858780@0] gxbb_pm: meson_pm_probe done
  904. [    7.864100@0] cpucore_cooling_register, max_cpu_core_num:4
  905. [    7.883877@0] aml_istbt_dev_ready NULL
  906. [    7.888420@0] ALSA device list:
  907. [    7.892773@0]   #0: AML-M8AUDIO
  908. [    7.897724@0] Freeing unused kernel memory: 1180K (ffffffc001e18000 - ffffffc001f3f000)
  909. [    7.915266@3] vout_serve: vmode set to 720p60hz
  910. [    7.915266@3]
  911. [    7.924741@3] fb: current vmode=1080p60hz
  912. [    7.929129@3] tv_vout: tv_set_current_vmode[759]fps_target_mode=10
  913. [    7.934720@3] tv_vout: mode is 10,sync_duration_den=1,sync_duration_num=60
  914. [    7.941517@3] tv_vout: TV mode 720p60hz selected.
  915. [    7.946196@3]
  916. [    7.946196@3] vdac_enable: on:0,module_sel:8
  917. [    7.956982@3]
  918. [    7.956982@3] vdac_enable: on:0,module_sel:8
  919. [    7.975845@3] tv_vout: new mode =720p60hz set ok
  920. [    7.985329@3] vout_serve: vinfo mode is: 720p60hz
  921. [    7.994808@3] vout_serve: new mode 720p60hz
  922. [    7.994808@3]  set ok
  923. [    8.014206@3] hdmitx: video: get current mode: 720p60hz
  924. [    8.023569@3] hdmitx: update rx hdr info 0
  925. [    8.032854@3] hdmitx: get ext_name 1080p60hz
  926. [    8.042109@3] hdmitx: system: already init VIC = 0  Now VIC = 4
  927. [    8.051590@3] hdmitx: rx no SCDC present indicator
  928. [    8.060015@3] hdmitx: ddc rd8b error 0x54 0x01
  929. [    8.066328@3] hdmitx: ddc rd8b error 0x54 0x01
  930. [    8.070579@3] hdmirx version is 1.4 or below
  931. [    8.074815@3] hdmitx div40: 0
  932. [    8.103417@3] hdmitx: system: set mode VIC 4 (cd0,cs0,pm1,vd0,1)
  933. [    8.103454@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  934. [    8.116666@3] hdmitx: ddc w1b error 0x54 0x20 0x00
  935. [    8.123010@3] hdmitx: ddc w1b error 0x54 0x20 0x00
  936. [    8.129338@3] hdmitx: ddc rd8b error 0x54 0x21
  937. [    8.133660@3] hdmitx: system: set pll
  938. [    8.137928@3] hdmitx: system: param->VIC:4
  939. [    8.142181@3] hdmitx: set clk: VIC = 4  cd = 4
  940. [    8.146450@3] config HPLL = 2970000
  941. [    8.150718@3] HPLL: 0xc000027b
  942. [    8.155712@3] config HPLL done
  943. [    8.160639@3] set_hpll_od3_clk_div[441] div = 6
  944. [    8.165589@3] j = 2  vid_clk_div = 1
  945. [    8.170485@3] hdmitx: set enc for VIC: 4
  946. [    8.175377@3] hdmitx_set_hw[4867] set VIC = 4
  947. [    8.244032@0] usb 1-1: New USB device found, idVendor=14cd, idProduct=8608
  948. [    8.250171@0] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  949. [    8.257547@0] usb 1-1: Product: USB 2.0 Hub            
  950. [    8.266501@0] usb 1-1: Manufacturer: USB Device  
  951. [    8.290691@0] hub 1-1:1.0: USB hub found
  952. [    8.299701@0] hub 1-1:1.0: 4 ports detected
  953. [    8.315438@3] hdmitx: system: phy setting done
  954. [    8.324249@0] hdmitx: system: irq 80000001
  955. [    8.328244@3] Sink is HDMI device
  956. [    8.328257@3] hdmitx: system: packet: can't get vendor data
  957. [    8.328262@3] hdmtix: set audio
  958. [    8.328276@3] hdmitx tx_aud_src = 0
  959. [    8.328316@3] hdmitx: fs = 3, cd = 4, tmds_clk = 74250
  960. [    8.328319@3] hdmitx aud_n_para = 6144
  961. [    8.328346@3] hdmitx set channel status
  962. [    8.328430@3] hdmitx: audio: Audio Type: PCM
  963. [    8.328438@3] fb: current vmode=720p60hz
  964. [    8.407369@0] Start = 0x10000100   End = 0x100001ff
  965. [    8.407383@0] [0x10000104]: 0x00000001
  966. [    8.407634@0] [0x10000180]: 0x000000ff
  967. [    8.407639@0] [0x10000181]: 0x000000ff
  968. [    8.407644@0] [0x10000182]: 0x00000003
  969. [    8.407649@0] [0x10000183]: 0x00000007
  970. [    8.407654@0] [0x10000184]: 0x0000003f
  971. [    8.407658@0] [0x10000185]: 0x00000002
  972. [    8.407665@0] [0x10000187]: 0x000000ff
  973. [    8.407670@0] [0x10000188]: 0x00000003
  974. [    8.456970@0] vout_serve: vmode set to 720p60hz
  975. [    8.456970@0]
  976. [    8.464138@0] vout_serve: don't set the same mode as current
  977. [    8.492027@0] fb: osd[0] enable: 1 (s905.sh)
  978. [    8.555450@2] random: systemd-udevd urandom read with 20 bits of entropy available
  979. [    8.583602@0] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
  980. [    8.686253@0] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534
  981. [    8.691879@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  982. [    8.699681@0] usb 1-1.1: Product: USB Receiver
  983. [    8.704765@0] usb 1-1.1: Manufacturer: Logitech
  984. [    8.742346@0] input: Logitech USB Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input3
  985. [    8.754754@0] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
  986. [    8.772440@0] input: Logitech USB Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input4
  987. [    8.784257@0] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
  988. [    8.873588@0] usb 1-1.4: new high-speed USB device number 4 using xhci-hcd
  989. [    8.984655@0] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8179
  990. [    9.009575@0] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  991. [    9.034942@0] usb 1-1.4: Product: 802.11n WLAN NIC
  992. [    9.058862@0] usb 1-1.4: Manufacturer: Realtek
  993. [   39.273964@0] random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!