API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 4th, 2020
198
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.25 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] sec_dbg_setup: str=@0x3ff00008
  2. [ 0.000000] sec_dbg_setup: secdbg_paddr = 0x3ff00008
  3. [ 0.000000] sec_dbg_setup: secdbg_size = 0x80000
  4. [ 0.004909] set_dload_mode <0> ( c0e0d928 )
  5. [ 0.004933] set_dload_mode <1> ( c0e0d934 )
  6. [ 0.049347] sec_debug_init: restart_reason_ddr_address : 0x0
  7. [ 0.049378] sec_debug_init: enable=0
  8. [ 0.049397] sec_debug_init:__raw_readl restart_reason=0
  9. [ 0.049420] sec_debug_init: restart_reason : 0xfa00a65c
  10. [ 0.201733] qup_i2c f9924000.i2c: Missing 'qcom,master-id' DT entry
  11. [ 0.203135] qup_i2c f9926000.i2c: Missing 'qcom,i2c-src-freq' DT entry
  12. [ 0.210225] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  13. [ 0.242394] ION-heap mm: Cannot specify alignment for this type of heap
  14. [ 0.242785] ION-heap adsp: Cannot specify alignment for this type of heap
  15. [ 0.638244] sec_therm_probe:ret=-517
  16. [ 0.638499] sec_therm_probe:ret=-19
  17. [ 0.638659] vadc property missing
  18. [ 0.638802] printk_remap_nocache: sec_log_save_size 1048576 at sec_log_save_base 0x3fe00008
  19. [ 0.638973] printk_remap_nocache: sec_log_reserve_size 1048584 at sec_log_reserve_base 0x3fe00000
  20. [ 0.639443] Failed to remap nocache log region
  21. [ 0.768787] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc2 incorrect owner 2
  22. [ 0.769040] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc3 incorrect owner 2
  23. [ 0.769438] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xc7 incorrect owner 2
  24. [ 0.770010] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa0 incorrect owner 4
  25. [ 0.770408] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa4 incorrect owner 2
  26. [ 0.770807] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa7 incorrect owner 2
  27. [ 0.771953] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
  28. [ 0.773696] [ on state : 0, off state : 1
  29. [ 0.774386] dsi_panel_device_register:1666, Disp_en_gpio (73)
  30. [ 0.774482] dsi_panel_device_register:1832, Disp_te gpio not specified
  31. [ 0.774735] dsi_panel_device_register:1838, Disp_rst_gpio (25)
  32. [ 0.807118] mdss_dsi_event_handler: unhandled event=1
  33. [ 0.842039] sps: BAM device 0xf9904000 is not registered yet.
  34. [ 0.872310] cypress_request_gpio: unable to request touchkey_scl [66]
  35. [ 0.955733] cypress_touchkey 21-0020: Touchkey FW Version: 0x06
  36. [ 1.016714] mms_ts_probe: [TSP] probe START!!
  37. [ 1.125539] qup_i2c f9927000.i2c: QUP: I2C status flags :0xc1300c8, irq:131
  38. [ 1.125653] qup_i2c f9927000.i2c: I2C slave addr:0x48 not connected
  39. [ 1.125865] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  40. [ 1.126044] qup_i2c f9927000.i2c: I2C slave addr:0x48 not connected
  41. [ 1.126181] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  42. [ 1.126360] qup_i2c f9927000.i2c: I2C slave addr:0x48 not connected
  43. [ 1.545864] mms144_ts 5-0048: [TSP] ISC Ver [0xc7] [0x23] [0x23]
  44. [ 1.546029] mms144_ts 5-0048: [TSP] fw is latest. Do not update.
  45. [ 1.546232] mms_ts_probe: tsp : gpio_to_irq : 339
  46. [ 1.546691] mms_ts_probe: [TSP] probe END!!
  47. [ 1.553329] cam_dummy_init_module:182
  48. [ 1.553455] cam_dummy_platform_probe:87
  49. [ 1.555597] csiphy_probe: device id = 0
  50. [ 1.555866] csiphy_probe: device id = 1
  51. [ 1.559124] msm_camera_request_gpio_table:529 invalid gpio_tbl (null) / size 0
  52. [ 1.575128] msm_camera_request_gpio_table:529 invalid gpio_tbl (null) / size 0
  53. [ 1.577943] __msm_jpeg_init:895] Jpeg Device id 0
  54. [ 1.579755] stream_cnt:0
  55. [ 1.579928] cpp_dbg: end of cpp_init_hardware
  56. [ 1.581682] iris_radio: Cannot open the command channel
  57. [ 1.582070] qpnp_charger_read_dt_props: read EXT_OVP gpio (438)
  58. [ 1.636365] qcom,leds-qpnp qpnp-charger-e8a33000: Unable to get LED base address
  59. [ 1.636892] qcom,leds-qpnp leds-qpnp-e8a63400: Regulator get failed(-517)
  60. [ 1.637061] qcom,leds-qpnp leds-qpnp-e8a63400: Unable to read flash config data
  61. [ 1.637299] i2c i2c-23: an30259a_probe
  62. [ 1.646235] QCE50: __qce_init_clk: Unable to get CE core clk
  63. [ 1.646334] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
  64. [ 1.650205] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  65. [ 1.651112] cm36651_parse_dt complete, vdd_en:110 p_out:65 /efs/prox_cal
  66. [ 1.756278] cm36651_setup_reg: initial proximity value = 3
  67. [ 1.758025] mpu6500_parse_dt complete, SCL:7 SDA:6 IRQ:64
  68. [ 1.758232] mpu6500_vdd_on: error vreg_2p8 setting voltage ret=-22
  69. [ 1.927714] msm8226-asoc-tapan sound-9302.46: Property 'qcom,audio-routing' does not exist or its length is not even
  70. [ 1.946604] **** secdbg_log or secdbg_paddr is not initialized ****
  71. [ 1.958103] sec_jack_probe - defer as codec_probe_done is false
  72. [ 1.959163] gpio-keys gpio_keys.82: [Keys] no regulator: ignoring
  73. [ 1.961002] qcom,leds-qpnp leds-qpnp-e8a63400: Regulator get failed(-517)
  74. [ 1.961177] qcom,leds-qpnp leds-qpnp-e8a63400: Unable to read flash config data
  75. [ 1.961434] qpnp_charger_read_dt_props: read EXT_OVP gpio (438)
  76. [ 1.961757] qpnp_chg_ibatterm_set: bad mA=70 asked to set, setting 100mA instead
  77. [ 1.961952] qpnp_chg_ibatterm_set: REG IBAT_TERM_CHGR(105b) : 8
  78. [ 1.963361] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
  79. [ 1.963586] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
  80. [ 1.963693] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
  81. [ 1.984979] get_prop_batt_temp: get_bat_temp: adc_code(32937) physical (276)
  82. [ 1.985842] sec_bat_read_dt_props: sec_bat_read_dt_props:parsing device tree for SEC dt parameters
  83. [ 1.986019] qpnp_charger_probe: SEC battery device tree read SUCCESS : rc(0)
  84. [ 1.986209] qpnp_charger_probe: qpnp_charger_probe: initialize battery status(2) & health(1)
  85. [ 1.986414] qpnp_chg_charge_en: qpnp_chg_charge_en called with enable=0
  86. [ 1.986729] qpnp_batt_power_set_property: qpnp_batt_power_set_property: same cable, no change in cable type (0)
  87. [ 1.986920] qpnp_charger_probe: normal boot with cable_type(0)
  88. [ 1.995506] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  89. [ 2.017258] get_prop_batt_temp: get_bat_temp: adc_code(32936) physical (277)
  90. [ 2.018022] qpnp_chg_usb_usbin_valid_irq_handler: EXT_OVP disabled
  91. [ 2.018205] qpnp_chg_usb_usbin_valid_irq_handler: USB-IN triggered : usbin UNDER VOLTAGE
  92. [ 2.018314] qpnp_chg_usb_usbin_valid_irq_handler: Under Voltage - EXT_OVP disabled
  93. [ 2.018700] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  94. [ 2.019522] BMS: set_battery_data: battery capacity: 2100 mA
  95. [ 2.059950] get_prop_batt_temp: get_bat_temp: adc_code(32936) physical (277)
  96. [ 2.249257] power_supply bms: driver failed to report `current_avg' property: 4294967274
  97. [ 2.249574] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  98. [ 2.275903] power_supply bms: driver failed to report `current_avg' property: 4294967274
  99. [ 2.294708] sec_jack_probe - defer as codec_probe_done is false
  100. [ 2.296114] sec_jack_probe - defer as codec_probe_done is false
  101. [ 2.298114] power_supply bms: driver failed to report `current_avg' property: 4294967274
  102. [ 2.359594] get_prop_batt_temp: get_bat_temp: adc_code(32933) physical (277)
  103. [ 2.486859] power_supply bms: driver failed to report `current_avg' property: 4294967274
  104. [ 2.527596] get_prop_batt_temp: get_bat_temp: adc_code(32932) physical (277)
  105. [ 2.857114] get_prop_batt_temp: get_bat_temp: adc_code(32929) physical (277)
  106. [ 3.063618] get_prop_batt_temp: get_bat_temp: adc_code(32928) physical (277)
  107. [ 3.105578] get_prop_batt_temp: get_bat_temp: adc_code(32927) physical (277)
  108. [ 3.144853] EXT4-fs (mmcblk0p26): couldn't mount as ext3 due to feature incompatibilities
  109. [ 3.195978] EXT4-fs (mmcblk0p26): couldn't mount as ext2 due to feature incompatibilities
  110. [ 3.985208] sec_chg_time_management: discharging state! timer inactive
  111. [ 4.003001] get_prop_batt_temp: get_bat_temp: adc_code(32920) physical (277)
  112. [ 4.011882] get_prop_batt_temp: get_bat_temp: adc_code(32919) physical (277)
  113. [ 4.012064] sec_bat_monitor: status(2), health(1), batt_present(1), cable(0), siop(100)
  114. [ 4.012237] sec_bat_monitor: soc(100), vcell(4272), current(278), temperature(277), chg_en(0)
  115. [ 4.012342] sec_bat_monitor: ovp_uvlo(-1), second_phase_chg(0), polling_time(60), event(0x0), HT(600), LT(-50)
  116. [ 4.025557] EXT4-fs (mmcblk0p26): couldn't mount as ext3 due to feature incompatibilities
  117. [ 4.035873] EXT4-fs (mmcblk0p26): couldn't mount as ext2 due to feature incompatibilities
  118. [ 4.055856] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
  119. [ 4.060907] get_prop_batt_temp: get_bat_temp: adc_code(32920) physical (277)
  120. [ 4.080694] EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities
  121. [ 4.106054] get_prop_batt_temp: get_bat_temp: adc_code(32919) physical (277)
  122. [ 4.115303] EXT4-fs (loop1): couldn't mount as ext3 due to feature incompatibilities
  123. [ 4.668323] sm5502 15-0025: dev1: 0x0,dev2: 0x0,dev3: 0x0,Carkit: 0x0,ADC: 0x1f,Jig: OFF
  124. [ 10.065648] EXT4-fs (loop1): couldn't mount as ext2 due to feature incompatibilities
  125. [ 13.064684] init: /init.environ.rc: 13: export requires 2 arguments
  126. [ 13.069304] init: invalid uid 'fm_radio'
  127. [ 13.108357] power_supply bms: driver failed to report `current_avg' property: 4294967274
  128. [ 13.372185] get_prop_batt_temp: get_bat_temp: adc_code(32894) physical (279)
  129. [ 13.950387] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@fe12f000/tapan_codec failed
  130. [ 13.950695] diag: In diag_send_msg_mask_update, invalid status 0
  131. [ 13.950918] diag: In diag_send_log_mask_update, invalid status 0
  132. [ 13.951231] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-dmic-sample-rate property in node /soc/slim@fe12f000/tapan_codec failed
  133. [ 14.005254] ngd_msm_ctrl fe12f000.slim: ADSP slimbus not up yet
  134. [ 14.104319] sec_jack_probe - defer as codec_probe_done is false
  135. [ 14.215341] msm8226-asoc-tapan sound.45: Looking up qcom, cdc-lineout-spkr-gpios property in node /soc/sound failed -22
  136. [ 14.215547] msm8226_asoc_machine_probe Ear jack LDO node not available
  137. [ 14.216921] sec_jack_populate_dt_pdata : can not find the earjack-micbias-gpio in the dt
  138. [ 14.683368] power_supply bms: driver failed to report `current_avg' property: 4294967274
  139. [ 14.724709] get_prop_batt_temp: get_bat_temp: adc_code(32879) physical (279)
  140. [ 14.932064] power_supply bms: driver failed to report `current_avg' property: 4294967274
  141. [ 14.974182] get_prop_batt_temp: get_bat_temp: adc_code(32875) physical (280)
  142. [ 15.233694] diag: In diag_send_msg_mask_update, invalid status 0
  143. [ 15.234770] diag: In diag_send_log_mask_update, invalid status 0
  144. [ 15.293697] init: Detected MSM SOC ID=221 SOC VER=0 BOARD TYPE=MTP
  145. [ 15.294235] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
  146. [ 15.301098] init: cannot find '/sbin/upstart-property-watcher', disabling 'upstart-watcher'
  147. [ 15.301336] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
  148. [ 15.301534] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
  149. [ 15.341132] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  150. [ 15.348586] init: cannot find '/system/bin/ubuntuappmanager.disabled', disabling 'ubuntuappmanager'
  151. [ 15.536333] wcnss: wcnss_nvbin_dnld
  152. [ 15.536519] wcnss: request_firmware
  153. [ 15.813160] wcnss: NV bin size: 29812, total_fragments: 10
  154. [ 15.813332] wcnss: no space available for smd frame
  155. [ 15.840173] wcnss: no space available for smd frame
  156. [ 15.865391] wcnss: no space available for smd frame
  157. [ 15.895251] wcnss: no space available for smd frame
  158. [ 16.200564] get_prop_batt_temp: get_bat_temp: adc_code(32854) physical (281)
  159. [ 16.343506] healthd: wakealarm_init: timerfd_create failed
  160. [ 16.395116] get_prop_batt_temp: get_bat_temp: adc_code(32850) physical (281)
  161. [ 16.552301] msm_camera_request_gpio_table:529 invalid gpio_tbl (null) / size 0
  162. [ 16.806184] msm_camera_request_gpio_table:529 invalid gpio_tbl (null) / size 0
  163. [ 17.024516] msm_camera_request_gpio_table:529 invalid gpio_tbl (null) / size 0
  164. [ 17.147974] msm_camera_request_gpio_table:529 invalid gpio_tbl (null) / size 0
  165. [ 17.149208] MSM-SENSOR-DRIVER msm_sensor_driver_probe:170 camera id 0
  166. [ 17.149311] MSM-SENSOR-DRIVER msm_sensor_driver_probe:171 slave_addr 34
  167. [ 17.149962] MSM-SENSOR-DRIVER msm_sensor_driver_probe:318 msm_sensor_driver_probe line 318 camera_info->sensor_id = 0x175 = 0x175
  168. [ 17.149970]
  169. [ 17.150240] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vdig
  170. [ 17.150339] msm_camera_fill_vreg_params:70 dig min max voltage 1
  171. [ 17.150526] msm_camera_fill_vreg_params:110 i 4 j 2 cam_vaf
  172. [ 17.150627] msm_camera_fill_vreg_params:115 af min max voltage 1
  173. [ 17.150951] msm_camera_fill_vreg_params:80 i 5 j 1 cam_vio
  174. [ 17.151053] msm_camera_fill_vreg_params:85 io min max voltage 1
  175. [ 17.151234] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vdig
  176. [ 17.151338] msm_camera_fill_vreg_params:70 dig min max voltage 0
  177. [ 17.151509] msm_camera_fill_vreg_params:80 i 3 j 1 cam_vio
  178. [ 17.151609] msm_camera_fill_vreg_params:85 io min max voltage 0
  179. [ 17.151792] msm_camera_fill_vreg_params:110 i 6 j 2 cam_vaf
  180. [ 17.151892] msm_camera_fill_vreg_params:115 af min max voltage 0
  181. [ 17.152760] MSM-SENSOR-DRIVER msm_sensor_driver_probe:431 msm_sensor_driver_probe: name : imx175, type = 131072 group_id = 6
  182. [ 17.152767]
  183. [ 17.162469] MSM-SENSOR-DRIVER msm_sensor_driver_probe:435 FAILED- 3: 0
  184. [ 17.162474]
  185. [ 17.172651] MSM-SENSOR-DRIVER msm_sensor_driver_probe:170 camera id 2
  186. [ 17.172757] MSM-SENSOR-DRIVER msm_sensor_driver_probe:171 slave_addr 20
  187. [ 17.173226] MSM-SENSOR-DRIVER msm_sensor_driver_probe:318 msm_sensor_driver_probe line 318 camera_info->sensor_id = 0x0 = 0x0
  188. [ 17.173234]
  189. [ 17.174599] msm_camera_fill_vreg_params:80 i 4 j 2 cam_vio
  190. [ 17.176112] msm_camera_fill_vreg_params:85 io min max voltage 1
  191. [ 17.176250] msm_camera_fill_vreg_params:80 i 3 j 2 cam_vio
  192. [ 17.176257] msm_camera_fill_vreg_params:85 io min max voltage 0
  193. [ 17.177721] MSM-SENSOR-DRIVER msm_sensor_driver_probe:431 msm_sensor_driver_probe: name : s5k6a3yx, type = 131072 group_id = 6
  194. [ 17.177728]
  195. [ 17.189595] MSM-SENSOR-DRIVER msm_sensor_driver_probe:435 FAILED- 3: 0
  196. [ 17.189602]
  197. [ 17.191580] msm_csiphy_subdev_ioctl:575 id 0
  198. [ 17.191692] msm_csiphy_get_subdev_id:566 subdev_id 0
  199. [ 17.192025] msm_csiphy_subdev_ioctl:575 id 1
  200. [ 17.192128] msm_csiphy_get_subdev_id:566 subdev_id 1
  201. [ 17.233729] msm_isp_open_node: HW Version: 0x20010014
  202. [ 17.276085] stream_cnt:0
  203. [ 17.276183] cpp_dbg: end of cpp_init_hardware
  204. [ 17.276594] cpp_dbg: MSM_CPP_MICRO_CLKEN_CTL
  205. [ 17.278732] cpp_dbg: MSM_CPP_MICRO_BOOT_START
  206. [ 17.278834] cpp_dbg: MSM_CPP_MSG_ID_CMD
  207. [ 17.319823] wlan: [1262:E :HDD] hdd_apply_cfg_ini: MAX_CFG_INI_ITEMS too small, must be at least 342
  208. [ 17.335475] wlan: [1262:E :VOS] INFO: NV binary file version=2 Driver default NV version=2, continue...
  209. [ 17.335483]
  210. [ 17.368002] cpp_dbg: Trigger MC to jump to start address
  211. [ 17.368208] cpp_dbg: msm_cpp_poll MSM_CPP_MSG_ID_CMD
  212. [ 17.370384] cpp_dbg: msm_cpp_poll 0x1
  213. [ 17.404369] wlan: [1262:E :HDD] hdd_generate_iface_mac_addr_auto: 7420: Failed to Get Serial NO
  214. [ 17.404488] wlan: [1262:E :HDD] hdd_wlan_startup: Failed to generate wlan interface mac addr using MAC from ini file 00:0a:f5:89:89:ff
  215. [ 17.425905] Poll failed: expect: 0x1
  216. [ 17.426012] cpp_dbg: msm_cpp_poll MSM_CPP_MSG_ID_JUMP_ACK
  217. [ 17.479823] Poll failed: expect: 0x1
  218. [ 17.480019] cpp_dbg: msm_cpp_poll MSM_CPP_MSG_ID_TRAILER
  219. [ 17.529642] Poll failed: expect: 0xabcdefaa
  220. [ 17.545450] cpp_close_node: irq_status: 0x23e
  221. [ 17.545722] cpp_close_node: DEBUG_SP: 0x0
  222. [ 17.545823] cpp_close_node: DEBUG_T: 0x0
  223. [ 17.546008] cpp_close_node: DEBUG_N: 0x0
  224. [ 17.546106] cpp_close_node: DEBUG_R: 0x0
  225. [ 17.546210] cpp_close_node: DEBUG_OPPC: 0x0
  226. [ 17.546403] cpp_close_node: DEBUG_MO: 0x0
  227. [ 17.546507] cpp_close_node: DEBUG_TIMER0: 0x0
  228. [ 17.546819] cpp_close_node: DEBUG_TIMER1: 0x0
  229. [ 17.547005] cpp_close_node: DEBUG_GPI: 0x0
  230. [ 17.547105] cpp_close_node: DEBUG_GPO: 0x0
  231. [ 17.547199] cpp_close_node: DEBUG_T0: 0x0
  232. [ 17.547369] cpp_close_node: DEBUG_R0: 0x0
  233. [ 17.547466] cpp_close_node: DEBUG_T1: 0x0
  234. [ 17.547638] cpp_close_node: DEBUG_R1: 0x0
  235. [ 17.624257] msm_open_cam_dummy: E
  236. [ 17.624376] msm_open_cam_dummy: X 0
  237. [ 18.010522] Notify: smsm init
  238. [ 18.315637] diag: In diag_send_msg_mask_update, invalid status 0
  239. [ 18.315789] diag: In diag_send_log_mask_update, invalid status 0
  240. [ 18.879494] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  241. [ 18.879933] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  242. [ 18.880574] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  243. [ 18.881126] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  244. [ 18.881598] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  245. [ 18.882234] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  246. [ 18.882703] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  247. [ 18.883258] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  248. [ 18.883885] [rmnet_usb0] error: rmnet_ioct called for unsupported cmd[35585]
  249. [ 18.884343] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  250. [ 18.884897] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  251. [ 18.885517] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  252. [ 18.886075] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  253. [ 18.886634] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  254. [ 18.887194] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  255. [ 18.887727] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  256. [ 18.888267] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  257. [ 18.888765] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  258. [ 19.176740] [SENSOR] accel_open_calibration: - Can't open calibration file
  259. [ 21.030981] audit: rate limit exceeded
  260. [ 22.552542] mdss_mdp_pipe_init: no 2 type pipes available
  261. [ 22.552645] mdss_mdp_overlay_pipe_setup: error allocating pipe
  262. [ 22.553386] mdss_dsi_event_handler: unhandled event=1
  263. [ 22.986247] to maintain ddefault brightness
  264. [ 23.015979] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  265. [ 23.043540] power_supply bms: driver failed to report `current_avg' property: 4294967274
  266. [ 23.302941] mdss_dsi_cmdlist_rx: No rx buffer provided
  267. [ 23.336160] mdss_dsi_cmdlist_rx: No rx buffer provided
  268. [ 23.369480] mdss_dsi_cmdlist_rx: No rx buffer provided
  269. [ 23.402820] mdss_dsi_cmdlist_rx: No rx buffer provided
  270. [ 23.436264] mdss_dsi_cmdlist_rx: No rx buffer provided
  271. [ 23.469583] mdss_dsi_cmdlist_rx: No rx buffer provided
  272. [ 23.502816] mdss_dsi_cmdlist_rx: No rx buffer provided
  273. [ 23.536145] mdss_dsi_cmdlist_rx: No rx buffer provided
  274. [ 23.569481] mdss_dsi_cmdlist_rx: No rx buffer provided
  275. [ 23.602817] mdss_dsi_cmdlist_rx: No rx buffer provided
  276. [ 23.636144] mdss_dsi_cmdlist_rx: No rx buffer provided
  277. [ 23.669484] mdss_dsi_cmdlist_rx: No rx buffer provided
  278. [ 23.702819] mdss_dsi_cmdlist_rx: No rx buffer provided
  279. [ 23.736337] mdss_dsi_cmdlist_rx: No rx buffer provided
  280. [ 23.769542] mdss_dsi_cmdlist_rx: No rx buffer provided
  281. [ 23.802906] mdss_dsi_cmdlist_rx: No rx buffer provided
  282. [ 23.852807] mdss_dsi_cmdlist_rx: No rx buffer provided
  283. [ 23.886147] mdss_dsi_cmdlist_rx: No rx buffer provided
  284. [ 23.919474] mdss_dsi_cmdlist_rx: No rx buffer provided
  285. [ 23.952820] mdss_dsi_cmdlist_rx: No rx buffer provided
  286. [ 23.986153] mdss_dsi_cmdlist_rx: No rx buffer provided
  287. [ 24.019472] mdss_dsi_cmdlist_rx: No rx buffer provided
  288. [ 24.052889] mdss_dsi_cmdlist_rx: No rx buffer provided
  289. [ 24.086146] mdss_dsi_cmdlist_rx: No rx buffer provided
  290. [ 24.119485] mdss_dsi_cmdlist_rx: No rx buffer provided
  291. [ 24.152819] mdss_dsi_cmdlist_rx: No rx buffer provided
  292. [ 24.186147] mdss_dsi_cmdlist_rx: No rx buffer provided
  293. [ 24.219519] mdss_dsi_cmdlist_rx: No rx buffer provided
  294. [ 24.252819] mdss_dsi_cmdlist_rx: No rx buffer provided
  295. [ 24.286156] mdss_dsi_cmdlist_rx: No rx buffer provided
  296. [ 24.292375] wlan: [1262:E :CTL] Host caps 14c001bf 0 0 80000000
  297. [ 24.292380]
  298. [ 24.292918] wlan: [1262:E :CTL] Host Capability
  299. [ 24.293170] wlan: [1262:E :CTL] MCC, P2P, DOT11AC, SLM_SESSIONIZATION, DOT11AC_OPMODE, SAP32STA, P2P_GO_NOA_DECOUPLE_INIT_SCAN, WLANACTIVE_OFFLOAD, WOW, WLAN_ROAM_SCAN_OFFLOAD, ,
  300. [ 24.296244] wlan: [1769:E :CTL] FW caps 1f877fb 0 0 0
  301. [ 24.296250]
  302. [ 24.296642] wlan: [1769:E :CTL] Firmware Capability
  303. [ 24.296775] wlan: [1769:E :CTL] MCC, P2P, SLM_SESSIONIZATION, DOT11AC_OPMODE, SAP32STA, TDLS, P2P_GO_NOA_DECOUPLE_INIT_SCAN, WLANACTIVE_OFFLOAD, BEACON_OFFLOAD, SCAN_OFFLOAD, BCN_MISS_OFFLOAD, STA_POWERSAVE, , BCN_FILTER, RTT, RATECTRL, WOW, WLAN_ROAM_SCAN_OFFLOAD,
  304. [ 24.319494] mdss_dsi_cmdlist_rx: No rx buffer provided
  305. [ 24.352831] mdss_dsi_cmdlist_rx: No rx buffer provided
  306. [ 24.635058] wlan: [2051:E :PMC] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  307. [ 24.756121] mdss_mdp_pipe_init: no 2 type pipes available
  308. [ 24.756277] mdss_mdp_overlay_pipe_setup: error allocating pipe
  309. [ 24.846177] wlan: [913:E :HDD] wlan_hdd_cfg80211_flush_pmksa: Invalid entry to delete
  310. [ 24.909989] mdss_mdp_pipe_init: no 3 type pipes available
  311. [ 24.910100] mdss_mdp_overlay_pipe_setup: error allocating pipe
  312. [ 24.944803] hcismd_set_enable 0
  313. [ 24.949678] hcismd_set_enable 1
  314. [ 24.951540] Bluetooth: Frame for unknown HCI device (hdev=NULL)
  315. [ 24.951819] Bluetooth: Frame for unknown HCI device (hdev=NULL)
  316. [ 26.038224] hcismd_set_enable 0
  317. [ 31.271210] mdss_mdp_pipe_init: no 3 type pipes available
  318. [ 31.271434] mdss_mdp_overlay_pipe_setup: error allocating pipe
  319. [ 31.554427] mdss_mdp_pipe_init: no 3 type pipes available
  320. [ 31.554651] mdss_mdp_overlay_pipe_setup: error allocating pipe
  321. [ 38.157084] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  322. [ 38.184794] power_supply bms: driver failed to report `current_avg' property: 4294967274
  323. [ 47.517199] qpnp_chg_usb_usbin_valid_irq_handler: USB-IN triggered : usbin-valid voltage
  324. [ 47.518998] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  325. [ 47.550712] sm5502 15-0025: dev1: 0x4,dev2: 0x0,dev3: 0x0,Carkit: 0x0,ADC: 0x1f,Jig: OFF
  326. [ 47.552035] sm5502 15-0025: sm5502_attach_dev: vbus val2
  327. [ 47.552730] sm5502_callback USB Cable status attached (1)
  328. [ 47.553203] qpnp_batt_power_set_property: qpnp_batt_power_set_property: cable type changed (0) -> (1)
  329. [ 47.553851] sec_handle_cable_insertion_removal: USB is inserted, chg_current 500, batt_present(1)
  330. [ 47.554555] sec_handle_cable_insertion_removal: USB : SIOP change in current ibatmax_ma(500)
  331. [ 47.554973] sec_pm8226_start_charging: enable charging for cable type (1)
  332. [ 47.555910] sec_pm8226_start_charging: battery status changed to (1)
  333. [ 47.556597] qpnp_chg_charge_en: qpnp_chg_charge_en called with enable=1
  334. [ 47.557042] sec_handle_cable_insertion_removal: battery status changed from (2)->(1)
  335. [ 47.559716] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  336. [ 47.560212] sec_chg_time_management: Charging Time: 0 secs (rechg:0)
  337. [ 47.570391] get_prop_batt_temp: get_bat_temp: adc_code(32455) physical (299)
  338. [ 47.595567] get_prop_batt_temp: get_bat_temp: adc_code(32454) physical (299)
  339. [ 47.605116] get_prop_batt_temp: get_bat_temp: adc_code(32454) physical (299)
  340. [ 47.605646] sec_bat_monitor: status(1), health(1), batt_present(1), cable(1), siop(100)
  341. [ 47.605901] sec_bat_monitor: soc(100), vcell(4295), current(-3), temperature(299), chg_en(1)
  342. [ 47.606052] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(0), polling_time(60), event(0x0), HT(600), LT(-50)
  343. [ 47.620967] sm5502 15-0025: dev1: 0x4,dev2: 0x0,dev3: 0x0,Carkit: 0x0,ADC: 0x1f,Jig: OFF
  344. [ 47.621614] sm5502 15-0025: sm5502_attach_dev: vbus val2
  345. [ 47.621769] sm5502_callback USB Cable status attached (2)
  346. [ 47.655746] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  347. [ 47.664697] get_prop_batt_temp: get_bat_temp: adc_code(32454) physical (299)
  348. [ 47.695386] get_prop_batt_temp: get_bat_temp: adc_code(32453) physical (299)
  349. [ 47.780368] get_prop_batt_temp: get_bat_temp: adc_code(32452) physical (299)
  350. [ 47.804580] get_prop_batt_temp: get_bat_temp: adc_code(32453) physical (299)
  351. [ 47.844202] get_prop_batt_temp: get_bat_temp: adc_code(32453) physical (299)
  352. [ 47.850616] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  353. [ 47.911730] get_prop_batt_temp: get_bat_temp: adc_code(32452) physical (299)
  354. [ 47.932877] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  355. [ 47.946756] get_prop_batt_temp: get_bat_temp: adc_code(32452) physical (299)
  356. [ 47.984124] get_prop_batt_temp: get_bat_temp: adc_code(32452) physical (299)
  357. [ 48.009882] get_prop_batt_temp: get_bat_temp: adc_code(32453) physical (299)
  358. [ 48.039684] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  359. [ 48.051286] get_prop_batt_temp: get_bat_temp: adc_code(32453) physical (299)
  360. [ 48.095819] get_prop_batt_temp: get_bat_temp: adc_code(32451) physical (299)
  361. [ 48.515244] sec_ovp_uvlo_worker: OVP/UVLO check: cable_type(1) uvp_uvlo(0)
  362. [ 48.515389] sec_ovp_uvlo_worker: ovp_uvlo(0) VBUS(1) status(1) health(1)
  363. [ 48.566879] get_prop_batt_temp: get_bat_temp: adc_code(32447) physical (300)
  364. [ 48.607910] get_prop_batt_temp: get_bat_temp: adc_code(32447) physical (300)
  365. [ 48.639921] get_prop_batt_temp: get_bat_temp: adc_code(32448) physical (300)
  366. [ 48.861279] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered
  367. [ 48.861736] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG ON IRQ
  368. [ 48.862458] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG ON IRQ - ret.intval : (500000)
  369. [ 48.863179] qpnp_chg_chgr_chg_fastchg_irq_handler: cable_type (1)
  370. [ 48.914784] get_prop_batt_temp: get_bat_temp: adc_code(32444) physical (300)
  371. [ 48.944803] get_prop_batt_temp: get_bat_temp: adc_code(32443) physical (300)
  372. [ 48.992285] get_prop_batt_temp: get_bat_temp: adc_code(32444) physical (300)
  373. [ 53.319267] wlan: [913:E :HDD] Network input is not correct
  374. [ 63.127925] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  375. [ 63.160520] power_supply bms: driver failed to report `current_avg' property: 4294967274
  376. [ 86.294375] wlan: [913:E :HDD] Network input is not correct
  377. [ 108.503785] sec_chg_time_management: Charging Time: 61 secs (rechg:0)
  378. [ 108.521746] get_prop_batt_temp: get_bat_temp: adc_code(32359) physical (306)
  379. [ 108.530765] get_prop_batt_temp: get_bat_temp: adc_code(32358) physical (306)
  380. [ 108.530977] sec_bat_monitor: first phase charging: ui_full_cnt(1)
  381. [ 108.531198] sec_bat_monitor: status(1), health(1), batt_present(1), cable(1), siop(100)
  382. [ 108.531444] sec_bat_monitor: soc(100), vcell(4363), current(-155), temperature(306), chg_en(1)
  383. [ 108.531669] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(0), polling_time(60), event(0x0), HT(600), LT(-50)
  384. [ 108.581985] get_prop_batt_temp: get_bat_temp: adc_code(32358) physical (306)
  385. [ 108.598849] get_prop_batt_temp: get_bat_temp: adc_code(32358) physical (306)
  386. [ 108.640559] get_prop_batt_temp: get_bat_temp: adc_code(32359) physical (306)
  387. [ 129.298928] wlan: [913:E :HDD] Network input is not correct
  388. [ 168.554222] sec_chg_time_management: Charging Time: 121 secs (rechg:0)
  389. [ 168.574143] get_prop_batt_temp: get_bat_temp: adc_code(32347) physical (307)
  390. [ 168.583934] get_prop_batt_temp: get_bat_temp: adc_code(32348) physical (307)
  391. [ 168.584374] sec_bat_monitor: first phase charging: ui_full_cnt(2)
  392. [ 168.585015] sec_bat_monitor: status(1), health(1), batt_present(1), cable(1), siop(100)
  393. [ 168.587159] sec_bat_monitor: soc(100), vcell(4349), current(-69), temperature(307), chg_en(1)
  394. [ 168.587813] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(0), polling_time(60), event(0x0), HT(600), LT(-50)
  395. [ 168.639842] get_prop_batt_temp: get_bat_temp: adc_code(32347) physical (307)
  396. [ 168.656853] get_prop_batt_temp: get_bat_temp: adc_code(32347) physical (307)
  397. [ 168.698683] get_prop_batt_temp: get_bat_temp: adc_code(32347) physical (307)
  398. [ 182.297728] wlan: [913:E :HDD] Network input is not correct
  399. [ 228.604320] sec_chg_time_management: Charging Time: 181 secs (rechg:0)
  400. [ 228.626542] get_prop_batt_temp: get_bat_temp: adc_code(32417) physical (302)
  401. [ 228.636387] get_prop_batt_temp: get_bat_temp: adc_code(32419) physical (302)
  402. [ 228.636830] sec_bat_monitor: first phase charging: ui_full_cnt(3)
  403. [ 228.637503] sec_bat_monitor: reported_soc : (100)
  404. [ 228.638157] sec_bat_monitor: first phase charging done: update battery UI FULL
  405. [ 228.639091] sec_bat_monitor: start second phase charging: ui_full(1)
  406. [ 228.639450] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  407. [ 228.640087] sec_bat_monitor: soc(100), vcell(4350), current(-63), temperature(302), chg_en(1)
  408. [ 228.640721] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  409. [ 228.817101] get_prop_batt_temp: get_bat_temp: adc_code(32419) physical (302)
  410. [ 228.872621] get_prop_batt_temp: get_bat_temp: adc_code(32418) physical (302)
  411. [ 228.928020] get_prop_batt_temp: get_bat_temp: adc_code(32420) physical (301)
  412. [ 245.238237] wlan: [913:E :HDD] Network input is not correct
  413. [ 288.655426] sec_chg_time_management: Charging Time: 60 secs (rechg:0)
  414. [ 288.674987] get_prop_batt_temp: get_bat_temp: adc_code(32435) physical (300)
  415. [ 288.684660] get_prop_batt_temp: get_bat_temp: adc_code(32435) physical (300)
  416. [ 288.685434] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  417. [ 288.686087] sec_bat_monitor: soc(100), vcell(4350), current(-56), temperature(300), chg_en(1)
  418. [ 288.686459] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  419. [ 288.741774] get_prop_batt_temp: get_bat_temp: adc_code(32435) physical (300)
  420. [ 288.760930] get_prop_batt_temp: get_bat_temp: adc_code(32433) physical (300)
  421. [ 288.802059] get_prop_batt_temp: get_bat_temp: adc_code(32434) physical (300)
  422. [ 308.068437] sec_debug_check_crash_key code 116 value 1 state 0 enable 0
  423. [ 308.068598] (sec_debug_set_upload_cause) 85
  424. [ 308.072438] mdss_dsi_event_handler: unhandled event=1
  425. [ 308.376599] to maintain ddefault brightness
  426. [ 308.386688] wlan: [913:E :HDD] Network input is not correct
  427. [ 308.481944] sec_debug_check_crash_key code 116 value 0 state 0 enable 0
  428. [ 308.482105] (sec_debug_set_upload_cause) cafebabe
  429. [ 348.713226] sec_chg_time_management: Charging Time: 120 secs (rechg:0)
  430. [ 348.731277] get_prop_batt_temp: get_bat_temp: adc_code(32350) physical (306)
  431. [ 348.741625] get_prop_batt_temp: get_bat_temp: adc_code(32351) physical (306)
  432. [ 348.741996] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  433. [ 348.742640] sec_bat_monitor: soc(100), vcell(4349), current(-55), temperature(306), chg_en(1)
  434. [ 348.743284] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  435. [ 348.794208] get_prop_batt_temp: get_bat_temp: adc_code(32350) physical (306)
  436. [ 348.820762] get_prop_batt_temp: get_bat_temp: adc_code(32349) physical (306)
  437. [ 348.862273] get_prop_batt_temp: get_bat_temp: adc_code(32351) physical (306)
  438. [ 371.240519] wlan: [913:E :HDD] Network input is not correct
  439. [ 384.091605] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  440. [ 384.143170] power_supply bms: driver failed to report `current_avg' property: 4294967274
  441. [ 408.767153] sec_chg_time_management: Charging Time: 180 secs (rechg:0)
  442. [ 408.789935] get_prop_batt_temp: get_bat_temp: adc_code(32243) physical (315)
  443. [ 408.800935] get_prop_batt_temp: get_bat_temp: adc_code(32242) physical (315)
  444. [ 408.801108] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  445. [ 408.801396] sec_bat_monitor: soc(100), vcell(4348), current(-49), temperature(315), chg_en(1)
  446. [ 408.801682] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  447. [ 408.846624] get_prop_batt_temp: get_bat_temp: adc_code(32243) physical (315)
  448. [ 408.861228] get_prop_batt_temp: get_bat_temp: adc_code(32243) physical (315)
  449. [ 408.905136] get_prop_batt_temp: get_bat_temp: adc_code(32244) physical (315)
  450. [ 434.354642] wlan: [913:E :HDD] Network input is not correct
  451. [ 444.088709] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  452. [ 444.103935] power_supply bms: driver failed to report `current_avg' property: 4294967274
  453. [ 468.819015] sec_chg_time_management: Charging Time: 240 secs (rechg:0)
  454. [ 468.843491] get_prop_batt_temp: get_bat_temp: adc_code(32348) physical (307)
  455. [ 468.854057] get_prop_batt_temp: get_bat_temp: adc_code(32347) physical (307)
  456. [ 468.854184] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  457. [ 468.854396] sec_bat_monitor: soc(100), vcell(4349), current(-50), temperature(307), chg_en(1)
  458. [ 468.854609] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  459. [ 468.899406] get_prop_batt_temp: get_bat_temp: adc_code(32348) physical (307)
  460. [ 468.914952] get_prop_batt_temp: get_bat_temp: adc_code(32348) physical (307)
  461. [ 468.961584] get_prop_batt_temp: get_bat_temp: adc_code(32348) physical (307)
  462. [ 497.251626] wlan: [913:E :HDD] Network input is not correct
  463. [ 528.875054] sec_chg_time_management: Charging Time: 300 secs (rechg:0)
  464. [ 528.895109] get_prop_batt_temp: get_bat_temp: adc_code(32365) physical (306)
  465. [ 528.905487] get_prop_batt_temp: get_bat_temp: adc_code(32364) physical (306)
  466. [ 528.906137] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  467. [ 528.906497] sec_bat_monitor: soc(100), vcell(4349), current(-49), temperature(306), chg_en(1)
  468. [ 528.907143] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  469. [ 528.956332] get_prop_batt_temp: get_bat_temp: adc_code(32365) physical (306)
  470. [ 528.973431] get_prop_batt_temp: get_bat_temp: adc_code(32366) physical (306)
  471. [ 529.021329] get_prop_batt_temp: get_bat_temp: adc_code(32365) physical (306)
  472. [ 560.328020] wlan: [913:E :HDD] Network input is not correct
  473. [ 588.931216] sec_chg_time_management: Charging Time: 360 secs (rechg:0)
  474. [ 588.951616] get_prop_batt_temp: get_bat_temp: adc_code(32363) physical (306)
  475. [ 588.966165] get_prop_batt_temp: get_bat_temp: adc_code(32362) physical (306)
  476. [ 588.966617] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  477. [ 588.967346] sec_bat_monitor: soc(100), vcell(4349), current(-43), temperature(306), chg_en(1)
  478. [ 588.968502] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  479. [ 589.013979] get_prop_batt_temp: get_bat_temp: adc_code(32361) physical (306)
  480. [ 589.028272] get_prop_batt_temp: get_bat_temp: adc_code(32362) physical (306)
  481. [ 589.081779] get_prop_batt_temp: get_bat_temp: adc_code(32364) physical (306)
  482. [ 623.262683] wlan: [913:E :HDD] Network input is not correct
  483. [ 648.991224] sec_chg_time_management: Charging Time: 420 secs (rechg:0)
  484. [ 649.012933] get_prop_batt_temp: get_bat_temp: adc_code(32356) physical (306)
  485. [ 649.022007] get_prop_batt_temp: get_bat_temp: adc_code(32355) physical (306)
  486. [ 649.022265] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  487. [ 649.022528] sec_bat_monitor: soc(100), vcell(4349), current(-40), temperature(306), chg_en(1)
  488. [ 649.022648] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  489. [ 649.069746] get_prop_batt_temp: get_bat_temp: adc_code(32357) physical (306)
  490. [ 649.088231] get_prop_batt_temp: get_bat_temp: adc_code(32356) physical (306)
  491. [ 649.139336] get_prop_batt_temp: get_bat_temp: adc_code(32355) physical (306)
  492. [ 686.284268] wlan: [913:E :HDD] Network input is not correct
  493. [ 709.045588] sec_chg_time_management: Charging Time: 480 secs (rechg:0)
  494. [ 709.063539] get_prop_batt_temp: get_bat_temp: adc_code(32345) physical (307)
  495. [ 709.072641] get_prop_batt_temp: get_bat_temp: adc_code(32345) physical (307)
  496. [ 709.072772] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  497. [ 709.073005] sec_bat_monitor: soc(100), vcell(4349), current(-39), temperature(307), chg_en(1)
  498. [ 709.073224] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  499. [ 709.121038] get_prop_batt_temp: get_bat_temp: adc_code(32345) physical (307)
  500. [ 709.141463] get_prop_batt_temp: get_bat_temp: adc_code(32346) physical (307)
  501. [ 709.193532] get_prop_batt_temp: get_bat_temp: adc_code(32345) physical (307)
  502. [ 749.342977] wlan: [913:E :HDD] Network input is not correct
  503. [ 769.094278] sec_chg_time_management: Charging Time: 540 secs (rechg:0)
  504. [ 769.113143] get_prop_batt_temp: get_bat_temp: adc_code(32334) physical (308)
  505. [ 769.123002] get_prop_batt_temp: get_bat_temp: adc_code(32333) physical (308)
  506. [ 769.123233] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  507. [ 769.123464] sec_bat_monitor: soc(100), vcell(4349), current(-38), temperature(308), chg_en(1)
  508. [ 769.123588] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  509. [ 769.175942] get_prop_batt_temp: get_bat_temp: adc_code(32335) physical (308)
  510. [ 769.200967] get_prop_batt_temp: get_bat_temp: adc_code(32335) physical (308)
  511. [ 769.244079] get_prop_batt_temp: get_bat_temp: adc_code(32333) physical (308)
  512. [ 812.321050] wlan: [913:E :HDD] Network input is not correct
  513. [ 829.154492] sec_chg_time_management: Charging Time: 600 secs (rechg:0)
  514. [ 829.175968] get_prop_batt_temp: get_bat_temp: adc_code(32320) physical (309)
  515. [ 829.185938] get_prop_batt_temp: get_bat_temp: adc_code(32320) physical (309)
  516. [ 829.187764] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  517. [ 829.188044] sec_bat_monitor: soc(100), vcell(4349), current(-35), temperature(309), chg_en(1)
  518. [ 829.188294] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  519. [ 829.234007] get_prop_batt_temp: get_bat_temp: adc_code(32320) physical (309)
  520. [ 829.248325] get_prop_batt_temp: get_bat_temp: adc_code(32320) physical (309)
  521. [ 829.297773] get_prop_batt_temp: get_bat_temp: adc_code(32321) physical (309)
  522. [ 875.304914] wlan: [913:E :HDD] Network input is not correct
  523. [ 884.089783] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  524. [ 884.142025] power_supply bms: driver failed to report `current_avg' property: 4294967274
  525. [ 889.216021] sec_chg_time_management: Charging Time: 660 secs (rechg:0)
  526. [ 889.235929] get_prop_batt_temp: get_bat_temp: adc_code(32306) physical (310)
  527. [ 889.245981] get_prop_batt_temp: get_bat_temp: adc_code(32306) physical (310)
  528. [ 889.246365] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  529. [ 889.247030] sec_bat_monitor: soc(100), vcell(4349), current(-33), temperature(310), chg_en(1)
  530. [ 889.247973] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  531. [ 889.295781] get_prop_batt_temp: get_bat_temp: adc_code(32308) physical (310)
  532. [ 889.313966] get_prop_batt_temp: get_bat_temp: adc_code(32308) physical (310)
  533. [ 889.359693] get_prop_batt_temp: get_bat_temp: adc_code(32308) physical (310)
  534. [ 938.348799] wlan: [913:E :HDD] Network input is not correct
  535. [ 949.270679] sec_chg_time_management: Charging Time: 720 secs (rechg:0)
  536. [ 949.289676] get_prop_batt_temp: get_bat_temp: adc_code(32296) physical (311)
  537. [ 949.298649] get_prop_batt_temp: get_bat_temp: adc_code(32298) physical (310)
  538. [ 949.298925] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  539. [ 949.299159] sec_bat_monitor: soc(100), vcell(4349), current(-32), temperature(311), chg_en(1)
  540. [ 949.299278] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  541. [ 949.344669] get_prop_batt_temp: get_bat_temp: adc_code(32296) physical (311)
  542. [ 949.359236] get_prop_batt_temp: get_bat_temp: adc_code(32297) physical (311)
  543. [ 949.400467] get_prop_batt_temp: get_bat_temp: adc_code(32297) physical (311)
  544. [ 1001.248994] wlan: [913:E :HDD] Network input is not correct
  545. [ 1009.336385] sec_chg_time_management: Charging Time: 780 secs (rechg:0)
  546. [ 1009.358850] get_prop_batt_temp: get_bat_temp: adc_code(32286) physical (312)
  547. [ 1009.367872] get_prop_batt_temp: get_bat_temp: adc_code(32284) physical (312)
  548. [ 1009.368129] sec_bat_monitor: status(4), health(1), batt_present(1), cable(1), siop(100)
  549. [ 1009.368283] sec_bat_monitor: soc(100), vcell(4349), current(-33), temperature(312), chg_en(1)
  550. [ 1009.368498] sec_bat_monitor: ovp_uvlo(0), second_phase_chg(1), polling_time(60), event(0x0), HT(600), LT(-50)
  551. [ 1009.416676] get_prop_batt_temp: get_bat_temp: adc_code(32285) physical (312)
  552. [ 1009.442536] get_prop_batt_temp: get_bat_temp: adc_code(32285) physical (312)
  553. [ 1009.490999] get_prop_batt_temp: get_bat_temp: adc_code(32283) physical (312)
  554. [ 1030.697915] sec_debug_check_crash_key code 116 value 1 state 0 enable 0
  555. [ 1030.698293] (sec_debug_set_upload_cause) 85
  556. [ 1030.722851] mdss_dsi_event_handler: unhandled event=1
  557. [ 1031.031529] sec_debug_check_crash_key code 116 value 0 state 0 enable 0
  558. [ 1031.031563] (sec_debug_set_upload_cause) cafebabe
  559. [ 1031.042320] to maintain ddefault brightness
  560. [ 1032.064789] mdss_mdp_pipe_init: no 3 type pipes available
  561. [ 1032.064935] mdss_mdp_overlay_pipe_setup: error allocating pipe
  562. [ 1060.933980] qpnp_chg_usb_chg_gone_irq_handler: EXT_OVP disabled
  563. [ 1060.934119] qpnp_chg_usb_chg_gone_irq_handler: chg_gone triggered: disable chg
  564. [ 1060.934350] qpnp_chg_charge_en: qpnp_chg_charge_en called with enable=0
  565. [ 1060.965353] qpnp_chg_usb_usbin_valid_irq_handler: EXT_OVP disabled
  566. [ 1060.965574] qpnp_chg_usb_usbin_valid_irq_handler: USB-IN triggered : usbin UNDER VOLTAGE
  567. [ 1060.965792] qpnp_chg_usb_usbin_valid_irq_handler: Under Voltage - EXT_OVP disabled
  568. [ 1060.967634] sm5502_callback USB Cable Status detached (1)
  569. [ 1060.972292] qpnp_batt_power_set_property: qpnp_batt_power_set_property: cable type changed (1) -> (0)
  570. [ 1060.972522] sec_handle_cable_insertion_removal: cable not connected: cable_type(0)
  571. [ 1060.972638] sec_pm8226_stop_charging: disable charging
  572. [ 1060.972974] qpnp_chg_charge_en: qpnp_chg_charge_en called with enable=0
  573. [ 1060.973118] sec_pm8226_stop_charging: BATTERY FULL stop charging !
  574. [ 1060.973344] qpnp_chg_iusbmax_set: bad mA=0 asked to set
  575. [ 1060.973463] sec_handle_cable_insertion_removal: battery status changed from (4)->(2)
  576. [ 1060.974808] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
  577. [ 1060.990743] sec_chg_time_management: discharging state! timer inactive
  578. [ 1061.009705] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  579. [ 1061.037255] get_prop_batt_temp: get_bat_temp: adc_code(32205) physical (318)
  580. [ 1061.046486] get_prop_batt_temp: get_bat_temp: adc_code(32205) physical (318)
  581. [ 1061.046606] sec_bat_monitor: status(2), health(1), batt_present(1), cable(0), siop(100)
  582. [ 1061.046804] sec_bat_monitor: soc(100), vcell(4277), current(363), temperature(318), chg_en(0)
  583. [ 1061.046987] sec_bat_monitor: ovp_uvlo(-1), second_phase_chg(0), polling_time(60), event(0x0), HT(600), LT(-50)
  584. [ 1061.120274] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  585. [ 1061.174004] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  586. [ 1061.231856] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  587. [ 1061.296505] get_prop_batt_temp: get_bat_temp: adc_code(32203) physical (318)
  588. [ 1061.309561] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  589. [ 1061.365552] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  590. [ 1061.925479] qpnp_arb_stop_work: arb request :chg_en(0), chg_done(0)
  591. [ 1061.926242] qpnp_chg_charge_en: qpnp_chg_charge_en called with enable=1
  592. [ 1061.990701] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  593. [ 1062.019089] get_prop_batt_temp: get_bat_temp: adc_code(32203) physical (318)
  594. [ 1062.070444] get_prop_batt_temp: get_bat_temp: adc_code(32204) physical (318)
  595. [ 1063.796728] sec_debug_check_crash_key code 116 value 1 state 0 enable 0
  596. [ 1063.797414] (sec_debug_set_upload_cause) 85
  597. [ 1064.229207] wlan: [913:E :HDD] Network input is not correct
  598.  
  599. No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!