Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- --- TLP 1.0.901 --------------------------------------------
- +++ Configured Settings: /etc/default/tlp
- TLP_ENABLE=1
- TLP_DEFAULT_MODE=AC
- TLP_PERSISTENT_DEFAULT=0
- DISK_IDLE_SECS_ON_AC=0
- DISK_IDLE_SECS_ON_BAT=2
- MAX_LOST_WORK_SECS_ON_AC=15
- MAX_LOST_WORK_SECS_ON_BAT=60
- CPU_HWP_ON_AC=balance_performance
- CPU_HWP_ON_BAT=balance_power
- SCHED_POWERSAVE_ON_AC=0
- SCHED_POWERSAVE_ON_BAT=1
- NMI_WATCHDOG=0
- ENERGY_PERF_POLICY_ON_AC=performance
- ENERGY_PERF_POLICY_ON_BAT=power
- DISK_DEVICES="sda sdb"
- DISK_APM_LEVEL_ON_AC="254 254"
- DISK_APM_LEVEL_ON_BAT="128 128"
- SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
- SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
- AHCI_RUNTIME_PM_TIMEOUT=15
- PCIE_ASPM_ON_AC=performance
- PCIE_ASPM_ON_BAT=powersave
- RADEON_POWER_PROFILE_ON_AC=high
- RADEON_POWER_PROFILE_ON_BAT=low
- RADEON_DPM_STATE_ON_AC=performance
- RADEON_DPM_STATE_ON_BAT=battery
- RADEON_DPM_PERF_LEVEL_ON_AC=auto
- RADEON_DPM_PERF_LEVEL_ON_BAT=auto
- WIFI_PWR_ON_AC=off
- WIFI_PWR_ON_BAT=on
- WOL_DISABLE=Y
- SOUND_POWER_SAVE_ON_AC=0
- SOUND_POWER_SAVE_ON_BAT=1
- SOUND_POWER_SAVE_CONTROLLER=Y
- BAY_POWEROFF_ON_AC=0
- BAY_POWEROFF_ON_BAT=0
- BAY_DEVICE="sr0"
- RUNTIME_PM_ON_AC=on
- RUNTIME_PM_ON_BAT=auto
- USB_AUTOSUSPEND=1
- USB_BLACKLIST_BTUSB=0
- USB_BLACKLIST_PHONE=0
- USB_BLACKLIST_PRINTER=1
- USB_BLACKLIST_WWAN=1
- RESTORE_DEVICE_STATE_ON_STARTUP=0
- +++ System Info
- System = MEDION 20 P6620
- BIOS = V1.0M
- Release = "Fedora release 27 (Twenty Seven)"
- Kernel = 4.14.7-300.fc27.x86_64 #1 SMP Mon Dec 18 16:06:12 UTC 2017 x86_64
- /proc/cmdline = BOOT_IMAGE=/vmlinuz-4.14.7-300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=de_DE.UTF-8
- Init system = systemd
- Boot mode = BIOS (CSM, Legacy)
- +++ TLP Status
- State = enabled
- Last run = 13:56:25, 4 sec(s) ago
- Mode = AC
- Power source = AC
- +++ Processor
- CPU model = Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative userspace powersave ondemand performance schedutil
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 1200000 [kHz]
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 2100000 [kHz]
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2100000 1600000 1200000 [kHz]
- /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = acpi-cpufreq
- /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
- /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = conservative userspace powersave ondemand performance schedutil
- /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 1200000 [kHz]
- /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 2100000 [kHz]
- /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2100000 1600000 1200000 [kHz]
- /sys/devices/system/cpu/cpufreq/boost = (not available)
- x86_energy_perf_policy: program not installed.
- /sys/module/workqueue/parameters/power_efficient = N
- /proc/sys/kernel/nmi_watchdog = 0
- +++ Undervolting
- PHC kernel not available.
- +++ Temperatures
- CPU temp = 48 [°C]
- Fan speed = (not available)
- +++ File System
- /proc/sys/vm/laptop_mode = 0
- /proc/sys/vm/dirty_writeback_centisecs = 1500
- /proc/sys/vm/dirty_expire_centisecs = 1500
- /proc/sys/vm/dirty_ratio = 20
- /proc/sys/vm/dirty_background_ratio = 10
- +++ Storage Devices
- /dev/sda:
- Model = WDC WD3200BEVT-22ZCT0
- Firmware = 11.01A11
- APM Level = 254
- Status = active/idle
- Scheduler = cfq
- Runtime PM: control = on, autosuspend_delay = -1
- +++ SATA Link Power Management
- /sys/class/scsi_host/host0/link_power_management_policy = max_performance
- /sys/class/scsi_host/host1/link_power_management_policy = max_performance
- /sys/class/scsi_host/host2/link_power_management_policy = max_performance
- /sys/class/scsi_host/host3/link_power_management_policy = max_performance
- /sys/class/scsi_host/host4/link_power_management_policy = max_performance
- /sys/class/scsi_host/host5/link_power_management_policy = max_performance
- +++ AHCI Host Controller Runtime Power Management
- /sys/bus/pci/devices/0000:00:1f.2/ata1/power/control = on
- /sys/bus/pci/devices/0000:00:1f.2/ata2/power/control = on
- /sys/bus/pci/devices/0000:00:1f.2/ata3/power/control = on
- /sys/bus/pci/devices/0000:00:1f.2/ata4/power/control = on
- /sys/bus/pci/devices/0000:00:1f.2/ata5/power/control = on
- /sys/bus/pci/devices/0000:00:1f.2/ata6/power/control = on
- +++ PCIe Active State Power Management
- /sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
- +++ Wireless
- bluetooth = none (no device)
- wifi = on
- wwan = none (no device)
- wlp2s0(rtl8192se) : wifi, connected, power management = off
- +++ Audio
- /sys/module/snd_hda_intel/parameters/power_save = 0
- /sys/module/snd_hda_intel/parameters/power_save_controller = N
- +++ Runtime Power Management
- Device blacklist = (not configured)
- Driver blacklist = amdgpu nouveau nvidia radeon (default)
- /sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, no driver)
- /sys/bus/pci/devices/0000:00:01.0/power/control = on (0x060400, PCI bridge, pcieport)
- /sys/bus/pci/devices/0000:00:1a.0/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1a.1/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1a.2/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1a.7/power/control = on (0x0c0320, USB controller, ehci-pci)
- /sys/bus/pci/devices/0000:00:1b.0/power/control = on (0x040300, Audio device, snd_hda_intel)
- /sys/bus/pci/devices/0000:00:1c.0/power/control = on (0x060400, PCI bridge, pcieport)
- /sys/bus/pci/devices/0000:00:1c.1/power/control = on (0x060400, PCI bridge, pcieport)
- /sys/bus/pci/devices/0000:00:1c.2/power/control = on (0x060400, PCI bridge, pcieport)
- /sys/bus/pci/devices/0000:00:1c.3/power/control = on (0x060400, PCI bridge, pcieport)
- /sys/bus/pci/devices/0000:00:1c.4/power/control = on (0x060400, PCI bridge, pcieport)
- /sys/bus/pci/devices/0000:00:1d.0/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1d.1/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1d.2/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1d.7/power/control = on (0x0c0320, USB controller, ehci-pci)
- /sys/bus/pci/devices/0000:00:1e.0/power/control = on (0x060401, PCI bridge, no driver)
- /sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, lpc_ich)
- /sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x010601, SATA controller, ahci)
- /sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x0c0500, SMBus, i801_smbus)
- /sys/bus/pci/devices/0000:01:00.0/power/control = on (0x030000, VGA compatible controller, nouveau)
- /sys/bus/pci/devices/0000:02:00.0/power/control = on (0x028000, Network controller, rtl8192se)
- /sys/bus/pci/devices/0000:03:00.0/power/control = on (0x020000, Ethernet controller, r8169)
- +++ USB
- Autosuspend = enabled
- Device whitelist = (not configured)
- Device blacklist = (not configured)
- Bluetooth blacklist = disabled
- Phone blacklist = disabled
- WWAN blacklist = enabled
- Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
- Bus 008 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 007 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 006 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 001 Device 002 ID 05c8:010b control = auto, autosuspend_delay_ms = 2000 -- Cheng Uei Precision Industry Co., Ltd (Foxlink) Webcam (UVC) (uvcvideo)
- Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
- Bus 005 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 004 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 003 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- +++ Battery Status
- /sys/class/power_supply/BAT0/manufacturer = FOX-LGC-22
- /sys/class/power_supply/BAT0/model_name = M08B1
- /sys/class/power_supply/BAT0/cycle_count = (not supported)
- /sys/class/power_supply/BAT0/charge_full_design = 4400 [mAh]
- /sys/class/power_supply/BAT0/charge_full = 4400 [mAh]
- /sys/class/power_supply/BAT0/charge_now = 0 [mAh]
- /sys/class/power_supply/BAT0/current_now = 0 [mA]
- /sys/class/power_supply/BAT0/status = Unknown
- Charge = 0.0 [%]
- Capacity = 100.0 [%]
- +++ Suggestions
- * Install smartmontools for disk drive health info
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement