API tools faq
paste
Advertisement
Guest User

SC220

a guest
Feb 16th, 2020
264
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.79 KB | None | 0 0
raw download clone embed print report
  1. FullCase.Slot0.101.86 >_devils
  2. _boot Download the boot image (FW image 1 and 2 erased)
  3. _cliAddTrc Add Trace to HALI Log - [Trace Param Val]
  4. _cliClear Clear HALI Trace Log
  5. _cliMask Display/Set Trace Mask - ([hali|sce|fwcore] [mask value]) (y|n)
  6. _clises Display CLI over SES debug information
  7. _cliTime Add Time Trace Entry to HALI Log - [on|off]
  8. _cliTrcSev Change HALI Trace Log Severity - [Trace Severity]
  9. _cliTrcShow Show HALI Trace Log
  10. _clrphyerr Clear PHY error counter(s) <phy Num (invalid PHY Num=all)>
  11. _date Date: date
  12. _debugpage2 Dispalys Page 2 data when Host read it : 0 = OFF !0 = Active
  13. _devils Print the Extended help
  14. _dwd_reset Disable WatchDog reset: dwd_reset
  15. _download Down load code using Xmodem: Region[0-9] Offset Erase[y/n]
  16. _download_fpga Down FPGA load code using Xmodem: _download_fpga
  17. _drive_pres Return Drive presense: _drive_pres
  18. _ecc Display ECC counts: ecc {clear}
  19. _ema_poll Turns on or off the analysis polling. Disables SES & LED update
  20. _epd Shut down external PHYs
  21. _epu Bring up external PHYs
  22. _erase Erase F/W Region: erase [0..10] NOTE: This can mess up your code!
  23. _event Event log test
  24. _fan_ctrl_thrd Write fan control parameters in C: fan_ctrl_thrd <M> <H> <SIM offset> <hysteresis>
  25. _flashdump Dump Flash: flashdump <offset> <length>
  26. _fpgaread Read FPGA Register: fpgaread <register> <length>
  27. _fpgawrite Write FPGA Register: fpgawrite <register> <data> [<register> <data>...]
  28. _fail_ts Fail temperature sensor: fail_ts <sensor>
  29. _flashpeer Flash Peer: <0=ACTIVE ; 1=BOOT>
  30. _gpio_setting Read a GPIO Setting: gpio_settings <0..7>
  31. _history Show CLI History: history
  32. _hotswap Enable/disable Hotswap
  33. _icid_clear Clears the ICID value to default.
  34. _isim_msg Send message to ISIM thread
  35. _ledconfig Show LED Configuration Settings
  36. _ledmode Set Mode for led: ledmode <number><direction><state>
  37. _ledread Read LED GPIO value: ledread <number>
  38. _ledset Set LED GPIO Value: ledset <number><state>
  39. _lm75_trip LM75 Interrrupt Control: lm75_trip <sensor><state>
  40. _loadcpld Load xsvf file from flash into CPLD
  41. _map Display SES Sensor Data: map
  42. _phyerr Display Phy Errors for all phys
  43. _phyinfo Display Phy Info
  44. _ps_pmb_test Test P/S Module PMBUS commands: ps_pmb_test <l(eft)/r(ight)>
  45. _psfup P/S Module Firmware update: psfup <l(eft)/r(ight)>
  46. _queue Dump the Message Queue usage: queue
  47. _quick Quick regression: quick
  48. _rdcam Read CAM Address contents <address (0-1024)>, <display count>
  49. _rdtxphy Display current SASTX2G Phy settings <phy Num (invalid PHY Num=all)>
  50. _rdrxphy Display current SASRX2G Phy settings <phy Num (invalid PHY Num=all)>
  51. _rdphyerr Display PHY error counters <phy Num (invalid PHY Num=all)>
  52. _rdled LED Control Register Read: rdled <offset> <# of 32 bit words>
  53. _readcfg Read config page <Page ID> [<Region>]
  54. _routetable Display Routing Tables: routetable
  55. _runtime Down load code using Xmodem to the non-active region: runtime
  56. _scsilog Display SCSI Event Log information: (<eventToDisplay>)
  57. _selfdisc Display expander's self discovery status descriptors
  58. _set_cid Set company ID of ELI: cid_set [0-From Exp, 1-Custom <32bit data>]
  59. _shutdown Invoke a thermal shut down sequence: _shutdown <why>
  60. _shutup Slow down fans: _shutup <0-100%> 20 default
  61. _slotiso Dump Slot Isolation Debug Data
  62. _slotled Control Slot LEDs: slotled <slot><pattern> (slot > MaxDrive = 'all')
  63. _splitforce Control Split Override: splitforce <0-switched; 1-ForceJoin; 3-ForceSplit>
  64. _ssc_control Turn SSC on or off <enable 1, disable 0>
  65. _ssptDebug Dump SSP Target Debug info
  66. _stack Show Stack Usage: stack
  67. _temp_thrd Write temp thresholds: temp_thrd <HS> <HC> <HW> <LW> <LC> <LS>
  68. _test_fail Test Failover on the alternate controller
  69. _test_stub test_stub
  70. _thread Display Threadx Information: thread
  71. _timer Display Timer information: timer
  72. _trace Display Trace Log [- for Tail] [+ for Head]: trace [-]count
  73. _traceclear Clear trace log: traceclear
  74. _twi_hang Hang the TWI bus for testing purposes only
  75. _ver Version Information: ver
  76. _wdt WatchDog test: wdt <who>
  77. _who Who's home (installed): who
  78. _wrphy Write SAS2G1-3 Phy setting <phy number,Dword>
  79. _wrphyall Write all SAS2G1-3 Phy setting <uses PHY setting table>
  80. _zone_mask Display Zone Mask for all PHYs
  81.  
  82. FullCase.Slot0.101.88 >devils
  83. asset_tag Set or Display the Asset Tag: asset_tag {setvalue}
  84. broadcast Send Broadcast SES Message: broadcast
  85. chassisname Display and or Set Chassis Name: chassisname <name string}
  86. chassistype Display and or Set Chassis Type: chassistype <0 = Blue Devil !0 = Red Devil>
  87. clear_eel Clear Event Error Log: clear_eel
  88. clear_temp Remove override of Temperature: clear_temp <sensor>
  89. dbs Database Read : dbs <page>
  90. devils Print the Help Screen
  91. drive_led Write drive led: <logicaldrive> <data>
  92. eepromdump EEprom Dump: eepromdump <port><addr><size in K(1,2,4,8,..512>
  93. eepromfill EEprom Fill: eepromfill <port><addr><size in K(1,2,4,8,..512><pattern>
  94. eepromwrite EEprom Write: eepromwrite <port><addr><size in K(1,2,4,8,..512><offset><length><pattern>
  95. fanlog Fan fault count for each power supply fan [8 per unit]
  96. fpgadisable Put FPGA in Slave Mode: fpgadisable>
  97. fpgaenable Put FPGA in Master Mode: fpgaenable>
  98. fpga_rd FPGA Access: fpga_rd <Register> <#bytes>
  99. fpga_wr FPGA Access: fpga_wr <Register> <data>[<Register> <data> ...]
  100. fru_display Display FRU Status: fru_display
  101. fru_clear Clear Fru: fru_clear [0-SIM0, 1-SIM1, 2-PBP, 3-PS0, 4-PS1 5-SBP]
  102. fru_download Download Fru: fru_download [0-SIM0, 1-SIM1, 2-PBP, 3-PS0, 4-PS1 5-SBP]
  103. fru_read Read Fru: fru_read [0-SIM0, 1-SIM1, 2-PBP, 3-PS0, 4-PS1 5-SBP]]
  104. get_time get encl time: get_time
  105. gpio_rd Read a GPIO: gpio_rd <number>
  106. heart_beat SIM Heartbeat Control: heart_beat [0=off !0=on] <timeout>
  107. isim_debug Change or view isim stats: <data> <0 - Disable; 1 - Enable>
  108. l4_test L4 integration manufacturing diag: l4_test
  109. lm75 LM75 Read Access: lm75 <Slave Address>
  110. lm75_rd LM75 Read Access: lm75_rd <Slave Address> <Register>
  111. lm75_wr LM75 Write Access: lm75_wr <Slave Address> <Register> <1 byte>
  112. log_ipmi Log an IPMI Event:log_ipmi<Code><Type><Sensor><EV0><EV1><EV2><EV3>
  113. max6654 Display MAX6654 Registers: max6654 <i2c port><slave addr>
  114. noise Write audible alarm: <data>
  115. nvramread8 Read NVram 32bit area: nvramread <address> <length>
  116. nvramread Read NVram 32bit area: nvramread <32bit address> <length>
  117. nvramwrite8 Write NVram 32bit area: nvramwrite <address> <data> [<32bit address> <data> ...]
  118. nvramwrite Write NVram 32bit area: nvramwrite <32bit address> <data> [<32bit address> <data> ...]
  119. page_a Display drive SAS Address: page_a
  120. ps_status Get P/S Module Status: ps_status <l(eft)/r(ight)>
  121. ps_cap Get P/S Module capability: ps_cap <l(eft)/r(ight)>
  122. ps_clear Clear P/S Module Status: ps_clr <l(eft)/r(ight)>
  123. ps_page Get P/S Module Status: ps_status <l(eft)/r(ight)>
  124. ppid Set or Display PPID: ppid {fruNumber}{setvalue}
  125. prompt Prompt on/off
  126. rd_8 8-bit Read: rd_8 <address> <# of 8 bit words>
  127. rd_16 16-bit Read: rd_16 <address> <# of 16 bit words>
  128. rd_32 32-bit Read: rd_32 <address> <# of 32 bit words>
  129. reset_peer Reset other SIM using GPIO <1-reset peer>
  130. reset Reset ARM using Watch Dog timer
  131. rev SIM Firmware and Diagnogstic Revision
  132. sas_address Display SAS Address from Phys: (option for magic addr <1>)
  133. sbb_status Set SBB status: sbb_set <default-print status, 0-set good, 1-set failed>
  134. scratchpad Display Location of Memory Test Area: scratchpad
  135. service_tag Set or Display the Service Tag: service_tag {setvalue}
  136. ses_page Display SES Page: ses_page <page><buffer size>
  137. set_speed Sets Fan Speeds: set_speed <0-100%> 20 default
  138. set_temp set encl temp: set_temp <sensor><temp>( -55 to 125 degrees C)
  139. set_thres Set P/S Module Fan Speed Threshold: set_thres <l(eft)/r(ight)><speed code 0..15>
  140. shelf_led Write shelf led: <data> <0 - Disable; 1 - Enable>
  141. twi_dis TWI device discovery: twi_dis
  142. twi_rd TWI device byte read: twi_rd <port ID> <address> <# of bytes - 0xff max>
  143. twi_stats Dump twi statistics: twi_stats [clear]
  144. twi_wr TWI device byte write: twi_wr <port ID> <address> {0xff bytes max}
  145. twi_wr_rd TWI device wr/rd: twi_wr_rd <port ID> <address> <#read bytes> <write data>
  146. wr_8 8-bit Write: wr_8 <address> <data> [<address> <data> ...]
  147. wr_16 16-bit Write: wr_16 <address> <data> [<address> <data> ...]
  148. wr_32 32-bit Write: wr_32 <address> <data> [<address> <data> ...]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!