Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg -t
- Linux version 4.14.52-gentoo (root@vilehost) (gcc version 7.3.0 (Gentoo 7.3.0-r3 p1.4)) #1 SMP Wed Jul 11 00:21:25 EDT 2018
- Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.14.52-gentoo root=UUID=859948dd-5acb-472a-b219-f3ed8b2cc064 ro
- KERNEL supported cpus:
- Intel GenuineIntel
- x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- e820: BIOS-provided physical RAM map:
- BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
- BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
- BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
- BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
- BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
- BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
- BIOS-e820: [mem 0x0000000040200000-0x00000000aabccfff] usable
- BIOS-e820: [mem 0x00000000aabcd000-0x00000000aacf3fff] reserved
- BIOS-e820: [mem 0x00000000aacf4000-0x00000000aacf5fff] usable
- BIOS-e820: [mem 0x00000000aacf6000-0x00000000aade7fff] reserved
- BIOS-e820: [mem 0x00000000aade8000-0x00000000aaf18fff] usable
- BIOS-e820: [mem 0x00000000aaf19000-0x00000000aafe7fff] ACPI NVS
- BIOS-e820: [mem 0x00000000aafe8000-0x00000000aaffcfff] usable
- BIOS-e820: [mem 0x00000000aaffd000-0x00000000aaffffff] ACPI data
- BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
- BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
- BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
- BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
- BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
- BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
- BIOS-e820: [mem 0x0000000100000000-0x000000024fdfffff] usable
- NX (Execute Disable) protection: active
- SMBIOS 2.7 present.
- DMI: ASUSTeK Computer Inc. K53SV/K53SV, BIOS K53SV.320 11/11/2011
- tsc: Fast TSC calibration using PIT
- e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- e820: remove [mem 0x000a0000-0x000fffff] usable
- e820: last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-CFFFF write-protect
- D0000-E7FFF uncachable
- E8000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask F80000000 write-back
- 1 base 080000000 mask FE0000000 write-back
- 2 base 0A0000000 mask FF8000000 write-back
- 3 base 0A8000000 mask FFC000000 write-back
- 4 base 0AB000000 mask FFF000000 uncachable
- 5 base 100000000 mask F00000000 write-back
- 6 base 200000000 mask FC0000000 write-back
- 7 base 240000000 mask FF0000000 write-back
- 8 base 24FE00000 mask FFFE00000 uncachable
- 9 disabled
- x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
- e820: last_pfn = 0xaaffd max_arch_pfn = 0x400000000
- found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffffffffff200c70]
- Base memory trampoline at [ffff880000098000] 98000 size 24576
- reserving inaccessible SNB gfx pages
- BRK [0x1604c0000, 0x1604c0fff] PGTABLE
- BRK [0x1604c1000, 0x1604c1fff] PGTABLE
- BRK [0x1604c2000, 0x1604c2fff] PGTABLE
- BRK [0x1604c3000, 0x1604c3fff] PGTABLE
- BRK [0x1604c4000, 0x1604c4fff] PGTABLE
- BRK [0x1604c5000, 0x1604c5fff] PGTABLE
- BRK [0x1604c6000, 0x1604c6fff] PGTABLE
- BRK [0x1604c7000, 0x1604c7fff] PGTABLE
- BRK [0x1604c8000, 0x1604c8fff] PGTABLE
- BRK [0x1604c9000, 0x1604c9fff] PGTABLE
- RAMDISK: [mem 0x36cab000-0x3764cfff]
- ACPI: Early table checksum verification disabled
- ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
- ACPI: XSDT 0x00000000AAFFEE18 00006C (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
- ACPI: FACP 0x00000000AAF9BD98 0000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
- ACPI: DSDT 0x00000000AAF7C018 00DC9C (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
- ACPI: FACS 0x00000000AAFE5E40 000040
- ACPI: FACS 0x00000000AAFE5D40 000040
- ACPI: APIC 0x00000000AAFFDF18 0000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
- ACPI: HPET 0x00000000AAFE6D18 000038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
- ACPI: ECDT 0x00000000AAFE5B18 0000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
- ACPI: MCFG 0x00000000AAFE6C98 00003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
- ACPI: SSDT 0x00000000AAF7B018 000967 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
- ACPI: SSDT 0x00000000AAF7A018 000996 (v01 PmRef CpuPm 00003000 INTL 20091112)
- ACPI: SLIC 0x00000000AAF9CC18 000176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
- ACPI: SSDT 0x00000000AAF5EA98 0002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
- ACPI: Local APIC address 0xfee00000
- Zone ranges:
- DMA [mem 0x0000000000001000-0x0000000000ffffff]
- DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- Normal [mem 0x0000000100000000-0x000000024fdfffff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x0000000000001000-0x000000000009dfff]
- node 0: [mem 0x0000000000100000-0x000000001fffffff]
- node 0: [mem 0x0000000020200000-0x000000003fffffff]
- node 0: [mem 0x0000000040200000-0x00000000aabccfff]
- node 0: [mem 0x00000000aacf4000-0x00000000aacf5fff]
- node 0: [mem 0x00000000aade8000-0x00000000aaf18fff]
- node 0: [mem 0x00000000aafe8000-0x00000000aaffcfff]
- node 0: [mem 0x0000000100000000-0x000000024fdfffff]
- Initmem setup node 0 [mem 0x0000000000001000-0x000000024fdfffff]
- On node 0 totalpages: 2074290
- DMA zone: 64 pages used for memmap
- DMA zone: 157 pages reserved
- DMA zone: 3997 pages, LIFO batch:0
- DMA32 zone: 10853 pages used for memmap
- DMA32 zone: 694549 pages, LIFO batch:31
- Normal zone: 21496 pages used for memmap
- Normal zone: 1375744 pages, LIFO batch:31
- kasan: KernelAddressSanitizer initialized
- Reserving Intel graphics memory at 0x00000000aba00000-0x00000000af9fffff
- ACPI: PM-Timer IO Port: 0x408
- ACPI: Local APIC address 0xfee00000
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a701 base: 0xfed00000
- smpboot: Allowing 16 CPUs, 8 hotplug CPUs
- PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
- PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
- PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
- PM: Registered nosave memory: [mem 0xaabcd000-0xaacf3fff]
- PM: Registered nosave memory: [mem 0xaacf6000-0xaade7fff]
- PM: Registered nosave memory: [mem 0xaaf19000-0xaafe7fff]
- PM: Registered nosave memory: [mem 0xaaffd000-0xaaffffff]
- PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
- PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
- PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
- PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
- PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
- PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
- PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
- PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
- PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
- PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
- PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
- PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
- PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
- e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
- clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
- random: get_random_bytes called from start_kernel+0xcb/0x564 with crng_init=0
- setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
- percpu: Embedded 53 pages/cpu @ffff8801fba00000 s176728 r8192 d32168 u262144
- pcpu-alloc: s176728 r8192 d32168 u262144 alloc=1*2097152
- pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
- Built 1 zonelists, mobility grouping on. Total pages: 2041720
- Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.14.52-gentoo root=UUID=859948dd-5acb-472a-b219-f3ed8b2cc064 ro
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Memory: 6788868K/8297160K available (12300K kernel code, 5143K rwdata, 5088K rodata, 1476K init, 10732K bss, 1508292K reserved, 0K cma-reserved)
- Kernel/User page tables isolation: enabled
- Hierarchical RCU implementation.
- RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
- RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
- NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
- Console: colour VGA+ 80x25
- console [tty0] enabled
- clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- hpet clockevent registered
- tsc: Fast TSC calibration using PIT
- tsc: Detected 2195.143 MHz processor
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.28 BogoMIPS (lpj=2195143)
- pid_max: default: 32768 minimum: 301
- ACPI: Core revision 20170728
- random: fast init done
- ACPI: 4 ACPI AML tables successfully acquired and loaded
- Security Framework initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- mce: CPU supports 9 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- process: using mwait in idle threads
- Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- Spectre V2 : Mitigation: Full generic retpoline
- Speculative Store Bypass: Vulnerable
- Freeing SMP alternatives memory: 24K
- smpboot: Max logical packages: 4
- Switched APIC routing to physical flat.
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- TSC deadline timer enabled
- smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
- Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
- core: PEBS disabled due to CPU errata, please upgrade microcode
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 00007fffffffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- Hierarchical SRCU implementation.
- NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- smp: Bringing up secondary CPUs ...
- x86: Booting SMP configuration:
- .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
- smp: Brought up 1 node, 8 CPUs
- smpboot: Total of 8 processors activated (35122.28 BogoMIPS)
- devtmpfs: initialized
- x86/mm: Memory block size: 128MB
- PM: Registering ACPI NVS region [mem 0xaaf19000-0xaafe7fff] (847872 bytes)
- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- futex hash table entries: 4096 (order: 6, 262144 bytes)
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- cpuidle: using governor menu
- ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- ACPI: bus type PCI registered
- PCI: Using configuration type 1 for base access
- core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
- mtrr: your CPUs had inconsistent variable MTRR settings
- mtrr: probably your BIOS does not setup all CPUs.
- mtrr: corrected configuration.
- HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: EC: EC started
- ACPI: EC: interrupt blocked
- ACPI: \: Used as first EC
- ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- ACPI: \: Used as boot ECDT EC to handle transactions
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFF8801FAA23200 000694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFF8801FAA14DC0 000303 (v01 PmRef ApIst 00003000 INTL 20091112)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFF8801F95595C0 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: Enabled 12 GPEs in block 00 to 3F
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
- acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
- pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
- pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
- pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
- pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
- pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
- pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
- pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
- pci_bus 0000:00: root bus resource [bus 00-3e]
- pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
- pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
- pci 0000:00:02.0: reg 0x10: [mem 0xdc400000-0xdc7fffff 64bit]
- pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
- pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
- pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- pci 0000:00:16.0: reg 0x10: [mem 0xdf00a000-0xdf00a00f 64bit]
- pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- pci 0000:00:1a.0: reg 0x10: [mem 0xdf008000-0xdf0083ff]
- pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- pci 0000:00:1b.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
- pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
- pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- pci 0000:00:1d.0: reg 0x10: [mem 0xdf007000-0xdf0073ff]
- pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
- pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
- pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
- pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
- pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
- pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
- pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
- pci 0000:00:1f.2: reg 0x24: [mem 0xdf006000-0xdf0067ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
- pci 0000:00:1f.3: reg 0x10: [mem 0xdf005000-0xdf0050ff 64bit]
- pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
- pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
- pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
- pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
- pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
- pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
- pci 0000:01:00.0: enabling Extended Tags
- pci 0000:00:01.0: PCI bridge to [bus 01]
- pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
- pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 02]
- pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
- pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
- pci 0000:03:00.0: [8086:08ae] type 00 class 0x028000
- pci 0000:03:00.0: reg 0x10: [mem 0xddc00000-0xddc01fff 64bit]
- pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PCI bridge to [bus 03]
- pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
- pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
- pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
- pci 0000:04:00.0: reg 0x10: [mem 0xdd200000-0xdd207fff 64bit]
- pci 0000:04:00.0: PME# supported from D3hot D3cold
- pci 0000:00:1c.3: PCI bridge to [bus 04]
- pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
- pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
- pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
- pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
- pci 0000:05:00.0: reg 0x10: [io 0x9000-0x90ff]
- pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
- pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
- pci 0000:05:00.0: supports D1 D2
- pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:1c.5: PCI bridge to [bus 05]
- pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
- pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
- pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
- ACPI: EC: interrupt unblocked
- ACPI: EC: event unblocked
- ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
- pci 0000:00:02.0: vgaarb: setting as boot VGA device
- pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
- pci 0000:01:00.0: vgaarb: bridge control possible
- pci 0000:00:02.0: vgaarb: no bridge control possible
- vgaarb: loaded
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ACPI: bus type USB registered
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- EDAC MC: Ver: 3.0.0
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
- e820: reserve RAM buffer [mem 0xaabcd000-0xabffffff]
- e820: reserve RAM buffer [mem 0xaacf6000-0xabffffff]
- e820: reserve RAM buffer [mem 0xaaf19000-0xabffffff]
- e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff]
- e820: reserve RAM buffer [mem 0x24fe00000-0x24fffffff]
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- NetLabel: unlabeled traffic allowed by default
- clocksource: Switched to clocksource hpet
- VFS: Disk quotas dquot_6.6.0
- VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- pnp: PnP ACPI init
- system 00:00: [io 0x0680-0x069f] has been reserved
- system 00:00: [io 0x1000-0x100f] has been reserved
- system 00:00: [io 0xffff] has been reserved
- system 00:00: [io 0xffff] has been reserved
- system 00:00: [io 0x0400-0x0453] has been reserved
- system 00:00: [io 0x0458-0x047f] has been reserved
- system 00:00: [io 0x0500-0x057f] has been reserved
- system 00:00: [io 0x164e-0x164f] has been reserved
- system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
- system 00:02: [io 0x0454-0x0457] has been reserved
- system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- pnp 00:04: Plug and Play ACPI device, IDs SYN0a17 SYN0a00 SYN0002 PNP0f13 (active)
- system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:05: [mem 0xfed10000-0xfed17fff] could not be reserved
- system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
- system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
- system 00:05: [mem 0xe0000000-0xe3ffffff] has been reserved
- system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
- system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
- system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
- system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
- system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
- system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
- system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- system 00:06: [mem 0xafa00000-0xafa00fff] has been reserved
- system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- system 00:07: [mem 0x20000000-0x201fffff] has been reserved
- system 00:07: [mem 0x40000000-0x401fffff] has been reserved
- system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 8 devices
- clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- pci 0000:00:01.0: PCI bridge to [bus 01]
- pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
- pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 02]
- pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
- pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
- pci 0000:00:1c.1: PCI bridge to [bus 03]
- pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
- pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
- pci 0000:00:1c.3: PCI bridge to [bus 04]
- pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
- pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
- pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
- pci 0000:00:1c.5: PCI bridge to [bus 05]
- pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
- pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
- pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
- pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
- pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
- pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
- pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
- pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
- pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff window]
- pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
- pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
- pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
- pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
- pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
- pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
- pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
- pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
- pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
- pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
- pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
- pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
- pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
- NET: Registered protocol family 2
- TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 65536 bind 65536)
- UDP hash table entries: 4096 (order: 5, 131072 bytes)
- UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- NET: Registered protocol family 1
- pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 9864K
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- software IO TLB [mem 0xa6bcd000-0xaabcd000] (64MB) mapped at [ffff8800a6bcd000-ffff8800aabccfff]
- RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
- RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
- RAPL PMU: hw unit of domain package 2^-16 Joules
- RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
- audit: initializing netlink subsys (disabled)
- audit: type=2000 audit(1531322724.640:1): state=initialized audit_enabled=0 res=1
- Initialise system trusted keyrings
- workingset: timestamp_bits=46 max_order=21 bucket_order=0
- SELinux: Registering netfilter hooks
- NET: Registered protocol family 38
- Key type asymmetric registered
- Asymmetric key parser 'x509' registered
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- io scheduler mq-deadline registered
- io scheduler kyber registered
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- Linux agpgart interface v0.103
- intel_idle: MWAIT substates: 0x21120
- intel_idle: v0.4.1 model 0x2A
- intel_idle: lapic_timer_reliable_states 0xffffffff
- ipmi message handler version 39.2
- IPMI System Interface driver.
- ipmi_si: Unable to find any System Interface(s)
- ACPI: AC Adapter [AC0] (on-line)
- input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- ACPI: Lid Switch [LID]
- input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- ACPI: Sleep Button [SLPB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- ACPI: Power Button [PWRF]
- (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [TZ00] (60 C)
- ACPI: Battery Slot [BAT0] (battery present)
- brd: module loaded
- loop: module loaded
- libphy: Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- ehci-pci 0000:00:1a.0: EHCI Host Controller
- ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- ehci-pci 0000:00:1a.0: debug port 2
- ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf008000
- ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 4.14.52-gentoo ehci_hcd
- usb usb1: SerialNumber: 0000:00:1a.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- ehci-pci 0000:00:1d.0: EHCI Host Controller
- ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- ehci-pci 0000:00:1d.0: debug port 2
- ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf007000
- ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 4.14.52-gentoo ehci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci-pci: OHCI PCI platform driver
- uhci_hcd: USB Universal Host Controller Interface driver
- i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- i8042: Detected active multiplexing controller, rev 1.1
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:01: RTC can wake from S4
- rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
- rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
- intel_pstate: Intel P-state driver initializing
- hidraw: raw HID events driver (C) Jiri Kosina
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- drop_monitor: Initializing network drop monitor service
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- microcode: sig=0x206a7, pf=0x10, revision=0x1b
- microcode: Microcode Update Driver: v2.2.
- sched_clock: Marking stable (5932499648, 0)->(5983426524, -50926876)
- registered taskstats version 1
- Loading compiled-in X.509 certificates
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- Loaded X.509 cert 'Build time autogenerated kernel key: 7c0d81ccff4d536ce4ff5910e501cee6a3126031'
- ima: No TPM chip found, activating TPM-bypass! (rc=-19)
- ima: Allocated hash algorithm: sha1
- rtc_cmos 00:01: setting system clock to 2018-07-11 15:25:25 UTC (1531322725)
- Freeing unused kernel memory: 1476K
- Write protecting the kernel read-only data: 20480k
- Freeing unused kernel memory: 2012K
- Freeing unused kernel memory: 1056K
- usb 1-1: new high-speed USB device number 2 using ehci-pci
- usb 2-1: new high-speed USB device number 2 using ehci-pci
- usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 6 ports detected
- usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 2-1:1.0: USB hub found
- hub 2-1:1.0: 6 ports detected
- usb 1-1.4: new high-speed USB device number 3 using ehci-pci
- usb 2-1-port3: over-current condition
- tsc: Refined TSC clocksource calibration: 2195.013 MHz
- clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
- usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
- usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-1.4: Product: USB2.0-CRW
- usb 1-1.4: Manufacturer: Generic
- usb 1-1.4: SerialNumber: 20100201396000000
- psmouse serio4: synaptics: queried max coordinates: x [..5762], y [..4902]
- psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1704, fw id: 705499
- input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
- usb 2-1-port4: over-current condition
- clocksource: Switched to clocksource tsc
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
- scsi host0: ahci
- scsi host1: ahci
- scsi host2: ahci
- scsi host3: ahci
- scsi host4: ahci
- scsi host5: ahci
- ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 24
- ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 24
- ata3: DUMMY
- ata4: DUMMY
- ata5: DUMMY
- ata6: DUMMY
- ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
- ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
- ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA60A, max UDMA/133
- ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: configured for UDMA/100
- ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
- ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54756 A60A PQ: 0 ANSI: 5
- scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0 1.00 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
- sd 0:0:0:0: [sda] 4096-byte physical blocks
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3
- sd 0:0:0:0: [sda] Attached SCSI disk
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 1:0:0:0: Attached scsi generic sg1 type 5
- sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- imm: Version 2.05 (for Linux 2.4.0)
- Fusion MPT base driver 3.04.20
- Copyright (c) 1999-2008 LSI Corporation
- Fusion MPT SPI Host driver 3.04.20
- Fusion MPT FC Host driver 3.04.20
- Fusion MPT SAS Host driver 3.04.20
- LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
- 3ware Storage Controller device driver for Linux v1.26.02.003.
- 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- Adaptec aacraid driver 1.2.1[50834]-custom
- megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- megasas: 07.702.06.00-rc1
- qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k.
- Emulex LightPulse Fibre Channel SCSI driver 11.4.0.3
- Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
- aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- mpt3sas version 15.100.00.00 loaded
- usbcore: registered new interface driver usb-storage
- xhci_hcd 0000:04:00.0: xHCI Host Controller
- xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
- xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: xHCI Host Controller
- usb usb3: Manufacturer: Linux 4.14.52-gentoo xhci-hcd
- usb usb3: SerialNumber: 0000:04:00.0
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- xhci_hcd 0000:04:00.0: xHCI Host Controller
- xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
- xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
- usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: xHCI Host Controller
- usb usb4: Manufacturer: Linux 4.14.52-gentoo xhci-hcd
- usb usb4: SerialNumber: 0000:04:00.0
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- usb 3-1: new full-speed USB device number 2 using xhci_hcd
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
- usb 3-1: New USB device found, idVendor=0451, idProduct=2046
- usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 3-1:1.0: USB hub found
- hub 3-1:1.0: 4 ports detected
- xor: automatically using best checksumming function avx
- async_tx: api initialized (async)
- device-mapper: dm-log-userspace: version 1.3.0 loaded
- raid6: sse2x1 gen() 3984 MB/s
- raid6: sse2x1 xor() 3218 MB/s
- raid6: sse2x2 gen() 7039 MB/s
- raid6: sse2x2 xor() 4669 MB/s
- raid6: sse2x4 gen() 9269 MB/s
- usb 3-1.1: new low-speed USB device number 3 using xhci_hcd
- raid6: sse2x4 xor() 6490 MB/s
- raid6: using algorithm sse2x4 gen() 9269 MB/s
- raid6: .... xor() 6490 MB/s, rmw enabled
- raid6: using ssse3x2 recovery algorithm
- device-mapper: raid: Loading target version 1.13.0
- usb 3-1.1: New USB device found, idVendor=04a5, idProduct=7008
- usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.1: Product: USB MULTIMEDIA KEYBOARD
- usb 3-1.1: Manufacturer: NOVATEK
- input: NOVATEK USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:04A5:7008.0001/input/input12
- hid-generic 0003:04A5:7008.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB MULTIMEDIA KEYBOARD] on usb-0000:04:00.0-1.1/input0
- input: NOVATEK USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:04A5:7008.0002/input/input13
- hid-generic 0003:04A5:7008.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB MULTIMEDIA KEYBOARD] on usb-0000:04:00.0-1.1/input1
- usb 3-1.2: new low-speed USB device number 4 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0003/input/input14
- hid-generic 0003:1C4F:0048.0003: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.3: new low-speed USB device number 5 using xhci_hcd
- usb 3-1.3: New USB device found, idVendor=040b, idProduct=2014
- usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 3-1.3: Product: 2.4GHz keyboard and mouse
- input: 2.4GHz keyboard and mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:040B:2014.0004/input/input15
- hid-generic 0003:040B:2014.0004: input,hidraw3: USB HID v1.10 Keyboard [2.4GHz keyboard and mouse] on usb-0000:04:00.0-1.3/input0
- input: 2.4GHz keyboard and mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:040B:2014.0005/input/input16
- hid-generic 0003:040B:2014.0005: input,hiddev96,hidraw4: USB HID v1.10 Mouse [2.4GHz keyboard and mouse] on usb-0000:04:00.0-1.3/input1
- Btrfs loaded, crc32c=crc32c-generic
- JFS: nTxBlock = 8192, nTxLock = 65536
- FS-Cache: Loaded
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- FS-Cache: Netfs 'nfs' registered for caching
- SGI XFS with ACLs, security attributes, realtime, no debug enabled
- fuse init (API version 7.26)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- e1000: Copyright (c) 1999-2006 Intel Corporation.
- dca service started, version 1.12.1
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- igb: Copyright (c) 2007-2014 Intel Corporation.
- pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
- r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000072000, 54:04:a6:25:08:10, XID 0c200000 IRQ 33
- r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- sky2: driver version 1.30
- VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
- Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- vxge: Copyright(c) 2002-2010 Exar Corp.
- vxge: Driver version: 2.5.3.22640-k
- tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
- ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
- ixgbe: Copyright (c) 1999-2016 Intel Corporation.
- ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
- ixgb: Copyright (c) 1999-2008 Intel Corporation.
- EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (2c0)
- EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- random: crng init done
- udevd[3201]: starting version 3.2.5
- udevd[3202]: starting eudev-3.2.5
- r8169 0000:05:00.0 enp5s0: renamed from eth0
- input: PC Speaker as /devices/platform/pcspkr/input/input17
- ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20170728/utaddress-247)
- ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20170728/utaddress-247)
- ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20170728/utaddress-247)
- ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- lpc_ich: Resource conflict(s) found affecting gpio_ich
- iTCO_vendor_support: vendor-support=0
- nvidia: disagrees about version of symbol module_layout
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [drm] Memory usable by graphics device = 2048M
- [drm] Replacing VGA console driver
- Console: switching to colour dummy device 80x25
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] Driver supports precise vblank timestamp query.
- i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
- [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
- Error: Driver 'pcspkr' is already registered, aborting...
- ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
- Intel(R) Wireless WiFi driver for Linux
- Copyright(c) 2003- 2015 Intel Corporation
- iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
- Error: Driver 'pcspkr' is already registered, aborting...
- acpi device:50: registered as cooling_device8
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input18
- ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm
- acpi device:52: registered as cooling_device9
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19
- fbcon: inteldrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 170x48
- i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
- iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
- iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
- iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
- ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
- snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
- iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
- snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- snd_hda_codec_realtek hdaudioC0D0: inputs:
- snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
- snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
- EXT4-fs (sda3): re-mounted. Opts: (null)
- input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
- input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
- input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
- Adding 6191100k swap on /dev/sda2. Priority:-2 extents:1 across:6191100k
- EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
- EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- 8021q: 802.1Q VLAN Support v1.8
- r8169 0000:05:00.0 enp5s0: link down
- 8021q: adding VLAN 0 to HW filter on device bond0
- iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
- iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
- usb 3-1.2: USB disconnect, device number 4
- ==================================================================
- BUG: KASAN: use-after-free in xhci_free_virt_device.part.21+0x1bd/0x280 [xhci_hcd]
- Read of size 4 at addr ffff8801edece5d0 by task swapper/0/0
- CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.52-gentoo #1
- Hardware name: ASUSTeK Computer Inc. K53SV/K53SV, BIOS K53SV.320 11/11/2011
- Call Trace:
- <IRQ>
- dump_stack+0x67/0x9b
- print_address_description+0x6a/0x250
- ? xhci_free_virt_device.part.21+0x1bd/0x280 [xhci_hcd]
- kasan_report+0x23f/0x350
- xhci_free_virt_device.part.21+0x1bd/0x280 [xhci_hcd]
- handle_cmd_completion+0xd5e/0x1b70 [xhci_hcd]
- ? xhci_queue_new_dequeue_state+0x350/0x350 [xhci_hcd]
- ? update_curr+0x194/0x2a0
- ? cpu_load_update+0x79/0x270
- xhci_irq+0x4f5/0xf80 [xhci_hcd]
- ? add_interrupt_randomness+0x1b7/0x340
- ? add_disk_randomness+0xe0/0xe0
- ? xhci_irq+0xf80/0xf80 [xhci_hcd]
- __handle_irq_event_percpu+0x69/0x260
- handle_irq_event_percpu+0x66/0xd0
- ? __handle_irq_event_percpu+0x260/0x260
- ? ktime_get+0x4f/0xb0
- ? lapic_next_deadline+0x5/0x40
- handle_irq_event+0x5b/0x90
- handle_edge_irq+0x157/0x2e0
- handle_irq+0x2c/0x40
- do_IRQ+0x4a/0xf0
- common_interrupt+0x84/0x84
- </IRQ>
- RIP: 0010:cpuidle_enter_state+0xd3/0x3d0
- RSP: 0018:ffffffffa5807d98 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff4e
- RAX: 0000000000000000 RBX: ffffe8ffffa12c80 RCX: ffffffffa44e9b85
- RDX: dffffc0000000000 RSI: fffffff7e9c7bf13 RDI: ffff8801fba2abe8
- RBP: 00000000000040b1 R08: fffffbfff4b9f9b0 R09: fffffbfff4b9f9b0
- R10: ffffffffa5807d60 R11: fffffbfff4b9f9af R12: 0000000000000003
- R13: ffffffffa5b08fd8 R14: 0000000000000000 R15: 000000092b5fa3f6
- ? sched_idle_set_state+0x25/0x30
- ? cpuidle_enter_state+0xcf/0x3d0
- ? tsc_verify_tsc_adjust+0x30/0x160
- do_idle+0x1aa/0x1f0
- cpu_startup_entry+0xb9/0xc0
- ? cpu_in_idle+0x20/0x20
- ? schedule+0x50/0xc0
- start_kernel+0x53f/0x564
- ? mem_encrypt_init+0x6/0x6
- ? load_ucode_intel_bsp+0x56/0x8e
- ? load_ucode_intel_bsp+0x56/0x8e
- ? init_intel_microcode+0xa7/0xa7
- ? load_ucode_bsp+0xcc/0x154
- secondary_startup_64+0xa5/0xb0
- Allocated by task 63:
- kasan_kmalloc+0xe4/0x170
- kmem_cache_alloc_trace+0xcd/0x1d0
- usb_alloc_dev+0x3e/0x540
- hub_port_connect+0x31a/0x1040
- port_event+0x7a3/0x940
- hub_event+0x4a6/0x570
- process_one_work+0x3e4/0x700
- worker_thread+0x86/0x7c0
- kthread+0x1af/0x1d0
- ret_from_fork+0x3a/0x50
- Freed by task 92:
- kasan_slab_free+0xab/0x1a0
- kfree+0x77/0x110
- device_release+0x47/0xe0
- kobject_put+0xbe/0x220
- hub_port_connect+0x139/0x1040
- port_event+0x7a3/0x940
- hub_event+0x4a6/0x570
- process_one_work+0x3e4/0x700
- worker_thread+0x86/0x7c0
- kthread+0x1af/0x1d0
- ret_from_fork+0x3a/0x50
- The buggy address belongs to the object at ffff8801edece0c0
- which belongs to the cache kmalloc-2048 of size 2048
- The buggy address is located 1296 bytes inside of
- 2048-byte region [ffff8801edece0c0, ffff8801edece8c0)
- The buggy address belongs to the page:
- page:ffffea0007b7b380 count:1 mapcount:0 mapping:ffff8801edece0c0 index:0x0 compound_mapcount: 0
- flags: 0x8000000000008100(slab|head)
- raw: 8000000000008100 ffff8801edece0c0 0000000000000000 0000000100000003
- raw: ffffea0007b74820 ffffea0007b7c9a0 ffff8801fa800a40 0000000000000000
- page dumped because: kasan: bad access detected
- Memory state around the buggy address:
- ffff8801edece480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- ffff8801edece500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- >ffff8801edece580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- ^
- ffff8801edece600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- ffff8801edece680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- ==================================================================
- Disabling lock debugging due to kernel taint
- usb 3-1.2: new low-speed USB device number 6 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0006/input/input23
- hid-generic 0003:1C4F:0048.0006: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 6
- usb 3-1.2: new low-speed USB device number 7 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0007/input/input24
- hid-generic 0003:1C4F:0048.0007: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 7
- usb 3-1.2: new low-speed USB device number 8 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0008/input/input25
- hid-generic 0003:1C4F:0048.0008: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 8
- usb 3-1.2: new low-speed USB device number 9 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0009/input/input26
- hid-generic 0003:1C4F:0048.0009: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 9
- usb 3-1.2: new low-speed USB device number 10 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000A/input/input27
- hid-generic 0003:1C4F:0048.000A: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 10
- usb 3-1.2: new low-speed USB device number 11 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000B/input/input28
- hid-generic 0003:1C4F:0048.000B: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 11
- usb 3-1.2: new low-speed USB device number 12 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000C/input/input29
- hid-generic 0003:1C4F:0048.000C: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 12
- usb 3-1.2: new low-speed USB device number 13 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000D/input/input30
- hid-generic 0003:1C4F:0048.000D: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- usb 3-1.2: USB disconnect, device number 13
- usb 3-1.2: new low-speed USB device number 14 using xhci_hcd
- usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
- usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-1.2: Product: Usb Mouse
- usb 3-1.2: Manufacturer: SIGMACHIP
- input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000E/input/input31
- hid-generic 0003:1C4F:0048.000E: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
- nvidia: disagrees about version of symbol module_layout
- NET: Registered protocol family 10
- IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
- IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- Segment Routing with IPv6
- IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
- iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
- IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
- iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
- IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- wlp3s0: authenticate with f8:2c:18:e6:13:0a
- wlp3s0: send auth to f8:2c:18:e6:13:0a (try 1/3)
- wlp3s0: authenticated
- wlp3s0: associate with f8:2c:18:e6:13:0a (try 1/3)
- wlp3s0: RX AssocResp from f8:2c:18:e6:13:0a (capab=0x411 status=0 aid=2)
- wlp3s0: associated
- IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement