Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Booting Linux on physical CPU 0
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.4.0-5-flo (buildd@kishi14) (gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-3ubuntu2) ) #1-Ubuntu SMP PREEMPT Thu Sep 3 14:21:37 UTC 2015
- <4>[ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- <4>[ 0.000000] Machine: QCT APQ8064 FLO
- <2>[ 0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space
- <6>[ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
- <6>[ 0.000000] Initialized persistent memory from 88d00000-88dfffff
- <6>[ 0.000000] cma: CMA: reserved 16 MiB at af800000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
- <6>[ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
- <7>[ 0.000000] On node 0 totalpages: 482303
- <7>[ 0.000000] Normal zone: 1556 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 161772 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 2536 pages used for memmap
- <7>[ 0.000000] HighMem zone: 316439 pages, LIFO batch:31
- <6>[ 0.000000] allocating 44236800 bytes at c28fa000 (82afa000 physical) for fb
- <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c532d000 s15680 r8192 d12992 u36864
- <7>[ 0.000000] pcpu-alloc: s15680 r8192 d12992 u36864 alloc=9*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 478211
- <5>[ 0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=0a1bb046 bootreason=Reboot fuse_info=Y ddr_vendor=elpida androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.08
- <6>[ 0.000000] HW Revision: ASUSTek input rev_e
- <6>[ 0.000000] HW Revision: ASUSTek matched rev_e
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 140MB 58MB 4MB 7MB 254MB 1420MB = 1883MB total
- <5>[ 0.000000] Memory: 1827564k/1947372k available, 101648k reserved, 1275900K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc0e4c99c (14611 kB)
- <5>[ 0.000000] .init : 0xc0f00000 - 0xc1003d40 (1040 kB)
- <5>[ 0.000000] .data : 0xc1004000 - 0xc1143d60 (1280 kB)
- <5>[ 0.000000] .bss : 0xc1143d84 - 0xc1440ee4 (3061 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:1177
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000000] console [tty0] enabled
- <6>[ 0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67667)
- <6>[ 0.150238] pid_max: default: 32768 minimum: 301
- <6>[ 0.150512] Security Framework initialized
- <6>[ 0.150604] AppArmor: AppArmor initialized
- <6>[ 0.150634] Yama: becoming mindful.
- <6>[ 0.150787] Mount-cache hash table entries: 512
- <6>[ 0.152069] Initializing cgroup subsys debug
- <6>[ 0.152099] Initializing cgroup subsys cpuacct
- <6>[ 0.152130] Initializing cgroup subsys freezer
- <6>[ 0.152160] CPU: Testing write buffer coherency: ok
- <6>[ 0.152404] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>[ 0.152435] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- <6>[ 0.152557] Setting up static identity map for 0x80b5a498 - 0x80b5a520
- <6>[ 0.155059] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- <6>[ 0.157073] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- <6>[ 0.158782] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- <6>[ 0.158905] Brought up 4 CPUs
- <6>[ 0.158966] SMP: Total of 4 processors activated (54.13 BogoMIPS).
- <6>[ 0.160461] devtmpfs: initialized
- <6>[ 0.172393] EVM: security.selinux
- <6>[ 0.172424] EVM: security.SMACK64
- <6>[ 0.172424] EVM: security.capability
- <6>[ 0.174224] dummy:
- <6>[ 0.175598] NET: Registered protocol family 16
- <6>[ 0.182098] DMA: preallocated 1792 KiB pool for atomic coherent allocations
- <3>[ 0.182434] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- <5>[ 0.185943] MIDR = 0x511f06f0
- <6>[ 0.186004] meminfo_init: smem ram ptable found: ver: 0 len: 5
- <6>[ 0.186035] Found 1 memory banks grouped into 8 memory regions
- <6>[ 0.186401] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
- <6>[ 0.187286] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
- <6>[ 0.187316] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
- <6>[ 0.187408] msm_rpm_init: RPM firmware 3.0.16842936
- <3>[ 0.206817] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206848] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206878] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206878] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206909] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206939] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206939] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.206970] msm_rpm_get_status(): Status id 433 not defined for target
- <6>[ 0.222045] ASUSTek: Bypassing PCB_ID3
- <6>[ 0.222106] ASUSTek: PCBID=141
- <6>[ 0.223083] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
- <6>[ 0.223327] pm8921_probe: PMIC revision 1: F4
- <6>[ 0.223327] pm8921_probe: PMIC revision 2: 06
- <6>[ 0.223358] pm8921_probe: PMIC version: PM8921 rev 3.0
- <6>[ 0.223388] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
- <6>[ 0.224456] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
- <6>[ 0.224975] pm_gpio_probe: OK: base=152, ngpio=44
- <6>[ 0.225280] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
- <6>[ 0.225372] pm8xxx_mpp_probe: OK: base=196, ngpio=12
- <6>[ 0.227111] pm8821_probe: PMIC revision 1: PM8821 rev F3
- <6>[ 0.227142] pm8821_probe: PMIC revision 2: PM8821 rev 0B
- <6>[ 0.227172] pm8821_probe: PMIC version: PM8821 ver 2.1
- <6>[ 0.227722] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
- <6>[ 0.227752] pm8xxx_mpp_probe: OK: base=208, ngpio=4
- <3>[ 0.228088] gpio_vreg_probe: gpio_label required.
- <4>[ 0.228118] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22
- <6>[ 0.229278] saw_probe: id=0, name=8921_s5
- <6>[ 0.229614] saw_probe: id=1, name=8921_s6
- <6>[ 0.229949] saw_probe: id=2, name=8821_s0
- <6>[ 0.230346] saw_probe: id=3, name=8821_s1
- <3>[ 0.238128] Sensors:DSPS: initial dsps.
- <4>[ 0.239044] [ELAN] Touch dirver register
- <6>[ 0.239349] persistent_ram: found existing buffer, size 37817, start 37817
- <6>[ 0.357879] console [ram-1] enabled
- <4>[ 0.358459] apq8064_init_fb: lcd_type=0
- <6>[ 0.358642] apq8064_init_fb: register mipi_JDI_panel_device
- <3>[ 0.359985] msm_gpiomux_install: write failure: -22
- <3>[ 0.360107] msm_gpiomux_install: write failure: -22
- <3>[ 0.360260] msm_gpiomux_install: write failure: -22
- <3>[ 0.360382] msm_gpiomux_install: write failure: -22
- <3>[ 0.360473] msm_gpiomux_install: write failure: -22
- <3>[ 0.360656] msm_gpiomux_install: write failure: -22
- <6>[ 0.361511] Registering gpio keys
- <6>[ 0.361694] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC
- <4>[ 0.361938] 8921_l17: Failed to create debugfs directory
- <4>[ 0.363586] ------------[ cut here ]------------
- <4>[ 0.363677] WARNING: at /build/linux-flo-iEq0Rz/linux-flo-3.4.0/arch/arm/mach-msm/subsystem_restart.c:573 subsys_restart_init+0xd8/0x104()
- <4>[ 0.363891] Modules linked in:
- <4>[ 0.364105] [<c00151b0>] (unwind_backtrace+0x0/0x11c) from [<c0079de8>] (warn_slowpath_common+0x4c/0x64)
- <4>[ 0.364288] [<c0079de8>] (warn_slowpath_common+0x4c/0x64) from [<c0079e18>] (warn_slowpath_null+0x18/0x1c)
- <4>[ 0.364471] [<c0079e18>] (warn_slowpath_null+0x18/0x1c) from [<c0f0c13c>] (subsys_restart_init+0xd8/0x104)
- <4>[ 0.364685] [<c0f0c13c>] (subsys_restart_init+0xd8/0x104) from [<c000871c>] (do_one_initcall+0x90/0x160)
- <4>[ 0.364868] [<c000871c>] (do_one_initcall+0x90/0x160) from [<c0f00a24>] (kernel_init+0xe8/0x1a4)
- <4>[ 0.365051] [<c0f00a24>] (kernel_init+0xe8/0x1a4) from [<c000f894>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.365203] ---[ end trace cc31ec72069605f0 ]---
- <6>[ 0.368988] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
- <6>[ 0.369110] sps:BAM 0x12244000 is registered.
- <6>[ 0.369781] sps:sps is ready.
- <6>[ 0.400665] bio: create slab <bio-0> at 0
- <6>[ 0.401489] vgaarb: loaded
- <6>[ 0.401916] ION heap vmalloc created
- <6>[ 0.402038] ION heap mm created at a0000000 with size 5c00000
- <6>[ 0.402160] ION heap mm_fw created at 9fe00000 with size 1e0000
- <6>[ 0.402343] ION heap mfc created at a5c00000 with size 2000
- <6>[ 0.402465] ION heap iommu created
- <6>[ 0.402679] ION heap qsecom created at fea07000 with size 780000
- <6>[ 0.402801] ION heap audio created at ff187000 with size 4cf000
- <5>[ 0.404083] pm8xxx_pwm_probe: OK
- <5>[ 0.404846] SCSI subsystem initialized
- <6>[ 0.405242] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
- <6>[ 0.405426] sps:BAM 0x28084000 is registered.
- <6>[ 0.408966] usbcore: registered new interface driver usbfs
- <6>[ 0.409332] usbcore: registered new interface driver hub
- <6>[ 0.409576] usbcore: registered new device driver usb
- <6>[ 0.409912] Linux media interface: v0.10
- <6>[ 0.410095] Linux video capture interface: v2.00
- <7>[ 0.410522] Registered led device: white
- <6>[ 0.411254] apq8064_pm8921_pwm_init+
- <6>[ 0.411499] apq8064_pm8921_pwm_init-
- <6>[ 0.412261] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
- <6>[ 0.412567] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
- <6>[ 0.412780] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
- <6>[ 0.413085] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
- <6>[ 0.413391] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
- <6>[ 0.413604] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
- <6>[ 0.413879] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
- <6>[ 0.414123] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
- <6>[ 0.414428] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
- <6>[ 0.414733] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
- <6>[ 0.414947] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
- <6>[ 0.415252] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
- <6>[ 0.415832] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
- <6>[ 0.416046] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
- <6>[ 0.416381] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
- <6>[ 0.416656] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
- <6>[ 0.416961] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
- <6>[ 0.417327] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
- <6>[ 0.417572] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
- <6>[ 0.417877] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
- <6>[ 0.418151] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
- <6>[ 0.418457] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
- <6>[ 0.418792] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
- <6>[ 0.419036] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
- <6>[ 0.419342] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
- <6>[ 0.419708] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
- <6>[ 0.419982] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
- <6>[ 0.420379] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
- <6>[ 0.420715] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
- <6>[ 0.421020] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
- <6>[ 0.421325] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
- <6>[ 0.421661] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
- <6>[ 0.422058] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
- <6>[ 0.422302] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
- <6>[ 0.422607] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
- <6>[ 0.422882] Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>[ 0.423767] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.423980] cfg80211: World regulatory domain updated:
- <6>[ 0.424072] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 0.424255] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.424438] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.424530] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.424713] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.424896] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.425140] NetLabel: Initializing
- <6>[ 0.425323] NetLabel: domain hash size = 128
- <6>[ 0.425415] NetLabel: protocols = UNLABELED CIPSOv4
- <6>[ 0.425628] NetLabel: unlabeled traffic allowed by default
- <6>[ 0.425933] Loading modules backported from Linux version v4.2-rc7-0-g2c6625c
- <6>[ 0.426116] Backport integrated by backports.git v4.2-rc1-1-3-g0d0798b
- <6>[ 0.426208] Bluetooth: Core ver 2.20
- <6>[ 0.426422] NET: Registered protocol family 31
- <6>[ 0.426544] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.426635] Bluetooth: HCI socket layer initialized
- <6>[ 0.426818] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.426971] Bluetooth: SCO socket layer initialized
- <6>[ 0.427886] Switching to clocksource gp_timer
- <6>[ 0.454284] AppArmor: AppArmor Filesystem Enabled
- <6>[ 0.466674] NET: Registered protocol family 2
- <6>[ 0.467071] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.467803] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.469146] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 0.469970] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.470062] TCP: reno registered
- <6>[ 0.470245] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.470367] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.470886] NET: Registered protocol family 1
- <6>[ 0.471496] RPC: Registered named UNIX socket transport module.
- <6>[ 0.471679] RPC: Registered udp transport module.
- <6>[ 0.471771] RPC: Registered tcp transport module.
- <6>[ 0.471923] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <7>[ 0.472045] PCI: CLS 0 bytes, default 64
- <6>[ 0.472290] Trying to unpack rootfs image as initramfs...
- <6>[ 0.626892] Freeing initrd memory: 3044K
- <6>[ 0.628387] Detected 9 counters on the L2CC PMU.
- <6>[ 0.629882] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
- <6>[ 0.631072] pil_riva pil_riva: using secure boot
- <6>[ 0.632812] pil_dsps pil_dsps: using secure boot
- <6>[ 0.633758] pil_gss pil_gss: using secure boot
- <3>[ 0.636291] smd_channel_probe_worker: allocation table not initialized
- <6>[ 0.647521] msm_dsps driver version 4.03.
- <6>[ 0.650177] NET: Registered protocol family 27
- <1>[ 0.655822] dma_test_init, minor number 97
- <6>[ 0.656494] lpass_fatal_init: lpass SSR driver init'ed.
- <6>[ 0.656951] wcnss_8960: module initialized
- <6>[ 0.657806] gss_8064_init: gss fatal driver init'ed.
- <6>[ 0.658721] acpuclk-8064 acpuclk-8064: SPEED BIN: 14
- <6>[ 0.658874] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
- <6>[ 0.661560] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
- <6>[ 0.661682] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
- <6>[ 0.661865] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
- <6>[ 0.662048] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
- <5>[ 0.664672] msm_rpm_log_probe: OK
- <6>[ 0.667907] usbcore: registered new interface driver hsic_sysmon
- <6>[ 0.668518] audit: initializing netlink socket (disabled)
- <5>[ 0.668731] type=2000 audit(0.670:1): initialized
- <4>[ 0.670288] highmem bounce pool size: 64 pages
- <5>[ 0.680786] NFS: Registering the id_resolver key type
- <6>[ 0.682250] fuse init (API version 7.18)
- <6>[ 0.682800] msgmni has been set to 1115
- <6>[ 0.685943] NET: Registered protocol family 38
- <6>[ 0.686798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 0.687011] io scheduler noop registered
- <6>[ 0.687377] io scheduler deadline registered (default)
- <6>[ 0.688018] io scheduler cfq registered
- <6>[ 0.692199] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
- <6>[ 0.692626] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00fc000
- <6>[ 0.693298] mipi_JDI_1080P_pt_init+
- <6>[ 0.693786] mipi_JDI_lcd_probe+
- <6>[ 0.694000] mipi_JDI_lcd_probe, hw_revision=0
- <6>[ 0.694366] mipi_JDI_lcd_probe, lcd_pwm_type=1
- <6>[ 0.695068] mipi_JDI_lcd_probe+
- <6>[ 0.695281] mipi_JDI_lcd_probe, hw_revision=0
- <6>[ 0.695648] mipi_JDI_lcd_probe, lcd_pwm_type=1
- <6>[ 0.695861] setting pdata->panel_info.fb_num to 3. type: 9
- <6>[ 0.710357] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!
- <7>[ 0.710937] Registered led device: lcd-backlight
- <6>[ 0.711059] mipi_JDI_lcd_probe-
- <6>[ 0.711181] mipi_JDI_1080P_pt_init-
- <6>[ 0.712341] setting pdata->panel_info.fb_num to 1. type: 7
- <6>[ 0.715332] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
- <6>[ 0.715850] mdp4_dtv_vsync_init: ndx=0
- <3>[ 0.716125] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ede71408
- <7>[ 0.716339] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
- <6>[ 0.716339] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- <6>[ 0.718109]
- <6>[ 0.718109] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 0.718780]
- <6>[ 0.718780] msm_vidc_enc: Inside vid_enc_vcd_init()
- <6>[ 0.720550] msm_serial_hs module loaded
- <6>[ 0.720977] msm_serial_hsl: detected port #1
- <6>[ 0.721252] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
- <6>[ 0.721771] msm_serial_hsl: detected port #0
- <6>[ 0.721984] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
- <6>[ 0.722564] msm_serial_hsl: driver initialized
- <6>[ 0.724304] msm_rotator_probe: rotator_hw_revision=2
- <6>[ 0.727935] diagchar initialized now
- <6>[ 0.734619] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- <6>[ 0.753509] brd: module loaded
- <6>[ 0.760742] loop: module loaded
- <6>[ 0.763275] anx7808 init gpio
- <6>[ 0.838348] sp_tx_hardware_poweron: anx7808 power on
- <6>[ 0.839202] ANX7808 is found.
- <5>[ 0.840545] 3.3V output disabled
- <6>[ 0.898376] sp_tx_hardware_powerdown: anx7808 power down
- <5>[ 0.898468] SP_TX To System State:
- <5>[ 0.898590] STATE_CABLE_PLUG
- <6>[ 0.899230] tabla-slim tabla-slim: Platform data from board file
- <3>[ 1.059020] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
- <6>[ 1.062164] tabla2x-slim tabla2x-slim: Platform data from board file
- <6>[ 1.125701] wcd9xxx_check_codec_type: codec is tabla_codec
- <6>[ 1.126098] wcd9xxx_check_codec_type: Read codec idbytes & version
- <6>[ 1.126098] byte_0[00000002] byte_1[00000000] byte_2[00000000]
- <6>[ 1.126129] byte_3[00000001] version = 2
- <4>[ 1.128143] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 1.128601] i2c-core: driver [tabla-i2c-core] using legacy resume method
- <6>[ 1.129852] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
- <6>[ 1.130645] bcm2079x-i2c 0-0077: requesting IRQ 320
- <6>[ 1.131164] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
- <6>[ 1.132293] SCSI Media Changer driver v0.25
- <6>[ 1.133422] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
- <6>[ 1.135833] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.136230] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.136810] rmnet_init: BAM devices[8]
- <6>[ 1.161285] PPP generic driver version 2.4.2
- <6>[ 1.161865] PPP BSD Compression module registered
- <6>[ 1.162078] PPP Deflate Compression module registered
- <6>[ 1.167114] PPP MPPE Compression module registered
- <6>[ 1.167358] NET: Registered protocol family 24
- <6>[ 1.167816] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 1.168029] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 1.168670] wcnss_wlan probed in built-in mode
- <6>[ 1.170471] usbcore: registered new interface driver asix
- <6>[ 1.171020] usbcore: registered new interface driver cdc_ether
- <6>[ 1.171356] usbcore: registered new interface driver net1080
- <6>[ 1.171844] usbcore: registered new interface driver cdc_subset
- <6>[ 1.172210] usbcore: registered new interface driver zaurus
- <6>[ 1.172882] usbcore: registered new interface driver cdc_ncm
- <4>[ 1.173187] smb345_probe+
- <7>[ 1.176788] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = L
- <7>[ 1.176879] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H
- <7>[ 1.176940] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L
- <4>[ 1.176940] smb345_probe-
- <4>[ 1.177093] i2c-core: driver [smb345] using legacy suspend method
- <4>[ 1.177215] i2c-core: driver [smb345] using legacy resume method
- <7>[ 1.177459] bq27541_probe + client->addr= 55
- <7>[ 1.178466] bq27541_get_psp status: Not charging ret= 0x0201
- <7>[ 1.179382] bq27541_get_psp voltage_now= 4294000 uV
- <7>[ 1.180267] bq27541_get_capacity = 100% ret= 100
- <7>[ 1.181152] bq27541_get_psp temperature= 275 (0.1¢XC)
- <7>[ 1.182861] bq27541_get_psp current = 0 mA
- <7>[ 1.183898] bq27541_get_psp status: Not charging ret= 0x0201
- <7>[ 1.184783] bq27541_get_psp status: Not charging ret= 0x0201
- <7>[ 1.185668] bq27541_get_psp voltage_now= 4294000 uV
- <7>[ 1.186218] setup_low_battery_irq irq=317, LL_BAT_T30=1
- <7>[ 1.186218] bq27541_probe - bq27541-battery driver registered
- <4>[ 1.186279] i2c-core: driver [bq27541-battery] using legacy suspend method
- <7>[ 1.186584] bq27541_get_capacity = 100% ret= 100
- <4>[ 1.186737] i2c-core: driver [bq27541-battery] using legacy resume method
- <6>[ 1.187225] msm_otg msm_otg: msm_otg probe
- <7>[ 1.187500] bq27541_get_psp temperature= 275 (0.1¢XC)
- <3>[ 1.188049] msm_otg msm_otg: failed to get phy_clk
- <6>[ 1.188201] msm_otg msm_otg: OTG regs = f0308000
- <7>[ 1.189361] bq27541_get_psp current = 0 mA
- <3>[ 1.191558] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist
- <7>[ 1.191894] gpio_request: gpio-23 (msm_otg_ap_acok) status -16
- <4>[ 1.191925] gpio 23 request failed
- <4>[ 1.192047] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L
- <7>[ 1.192352] gpio_request: gpio-77 (msm_otg_id_pin) status -16
- <4>[ 1.192352] gpio 77 request failed
- <4>[ 1.192565] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H
- <6>[ 1.193115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 1.194396] usbcore: registered new interface driver cdc_acm
- <6>[ 1.194519] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 1.194702] Initializing USB Mass Storage driver...
- <6>[ 1.194915] usbcore: registered new interface driver usb-storage
- <6>[ 1.195098] USB Mass Storage support registered.
- <6>[ 1.195251] usbcore: registered new interface driver ums-alauda
- <6>[ 1.195526] usbcore: registered new interface driver ums-cypress
- <6>[ 1.195709] usbcore: registered new interface driver ums-datafab
- <6>[ 1.195953] usbcore: registered new interface driver ums-freecom
- <6>[ 1.196136] usbcore: registered new interface driver ums-isd200
- <6>[ 1.196380] usbcore: registered new interface driver ums-jumpshot
- <6>[ 1.196563] usbcore: registered new interface driver ums-karma
- <6>[ 1.196807] usbcore: registered new interface driver ums-onetouch
- <6>[ 1.196990] usbcore: registered new interface driver ums-sddr09
- <6>[ 1.197265] usbcore: registered new interface driver ums-sddr55
- <6>[ 1.197418] usbcore: registered new interface driver ums-usbat
- <6>[ 1.197753] usbcore: registered new interface driver usbserial
- <6>[ 1.197875] usbserial: USB Serial Driver core
- <6>[ 1.198120] usbcore: registered new interface driver qc_csvt
- <6>[ 1.198272] USB Serial support registered for qc_csvt
- <6>[ 1.198577] usbcore: registered new interface driver usb_ehset_test
- <6>[ 1.198791] usbcore: registered new interface driver diag_bridge
- <6>[ 1.199218] usbcore: registered new interface driver mdm_bridge
- <6>[ 1.200012] usbcore: registered new interface driver ks_bridge
- <6>[ 1.200225] ksb_init: init done
- <6>[ 1.200592] msm_otg msm_otg: phy_reset: success
- <6>[ 1.201507] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- <6>[ 1.201812] mbim_init: initialize 1 instances
- <6>[ 1.202117] mbim_init: Initialized 1 ports
- <6>[ 1.204681] rndis_qc_init: initialize rndis QC instance
- <6>[ 1.205230] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.205444] android_usb gadget: Number of LUNs=1
- <6>[ 1.205535] lun0: LUN: removable file: (no medium)
- <6>[ 1.206176] android_usb gadget: android_usb ready
- <6>[ 1.207244] mousedev: PS/2 mouse device common for all mice
- <6>[ 1.208190] usbcore: registered new interface driver xpad
- <4>[ 1.208282] [ektf3k]:[elan] elan_ktf3k_ts_init
- <4>[ 1.208648] [ektf3k]:[ELAN] Start HW reset!
- <4>[ 1.308502] [usb_otg] switch to peripheral mode by default (boot)
- <4>[ 1.468688] [ektf3k]:[elan]detect intr=>Old FW
- <4>[ 1.469055] [ektf3k]:The boot code is old!
- <4>[ 1.498962] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
- <4>[ 1.499145] [ektf3k]:[elan] hello packet's rc = 0
- <6>[ 1.709014] notifying plugin
- <4>[ 1.710968] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044
- <4>[ 1.713104] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e
- <4>[ 1.715240] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2
- <4>[ 1.717285] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029
- <4>[ 1.719390] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047
- <4>[ 1.719512] [ektf3k]:[Elan] Max X=2239, Max Y=1343
- <6>[ 1.719909] input: elan-touchscreen as /devices/virtual/input/input0
- <4>[ 1.720367] [ektf3k]:The firmware was version 0xA044 and id:0x3029
- <4>[ 1.720611] [ektf3k]: /proc/ektf_dbg created
- <4>[ 1.721130] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
- <4>[ 1.721527] [ektf3k]:[ELAN]misc_register finished!!
- <6>[ 1.721618] elan-ktf3k 3-0010: Update power source to 0
- <6>[ 1.722595] lis3dh_acc accelerometer driver: init
- <4>[ 1.722778] i2c-core: driver [lis3dh_acc] using legacy suspend method
- <4>[ 1.722961] i2c-core: driver [lis3dh_acc] using legacy resume method
- <6>[ 1.723297] ASUSTek: lid_driver_probe
- <6>[ 1.723663] input: lid_input as /devices/virtual/input/input1
- <6>[ 1.726409] using rtc device, pm8xxx_rtc, for alarms
- <6>[ 1.726837] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- <6>[ 1.727813] i2c /dev entries driver
- <3>[ 1.735168] ov5693_init_module:105
- <3>[ 1.735992] ov5693_init_module:110 rc -19
- <3>[ 1.770843] gpio 25 VCM_PD(1)
- <3>[ 1.770996] gpio 31 XSHUTDN(1)
- <6>[ 1.833862] mi1040_init_module:323
- <3>[ 1.834289] mi1040_init_module:329 rc -19
- <6>[ 1.838775] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
- <7>[ 1.838958] smb345_charger: [usb_cable_type_detect] INOK=L
- <7>[ 1.838958] smb345_charger: [usb_cable_type_detect] Cable: SDP
- <7>[ 1.839416] smb345_charger: [smb345_vflt_setting] Bypass set Float Volt=e8
- <4>[ 1.839721] ========================================================
- <4>[ 1.839843] bq27541_battery_callback usb_cable_state = 1
- <4>[ 1.840026] ========================================================
- <6>[ 1.840118] battery_callback cable_wake_lock 5 sec...
- <6>[ 1.840118]
- <6>[ 1.840393] elan-ktf3k 3-0010: Update power source to 1
- <6>[ 1.840789] The USB cable status = CHARGER_SDP
- <6>[ 1.844329] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- <3>[ 2.009094] gpio 43 CAM_RST(1)
- <6>[ 2.068695] mi1040_sensor_match_id +++
- <6>[ 2.069427] Sensor id: 0x2481
- <6>[ 2.069549] PMIC gpio 11 CAM_VENDOR_1(0)
- <6>[ 2.069763] PMIC gpio 10 CAM_VENDOR_0(0)
- <6>[ 2.069885] PMIC gpio 24 CAM_LENS(0)
- <6>[ 2.070007] Vendor is B
- <6>[ 2.070098] mi1040_sensor_match_id ---
- <6>[ 2.311035] lirc_dev: IR Remote Control driver registered, major 237
- <6>[ 2.311157] IR NEC protocol handler initialized
- <6>[ 2.311340] IR RC5(x) protocol handler initialized
- <6>[ 2.311431] IR RC6 protocol handler initialized
- <6>[ 2.311614] IR JVC protocol handler initialized
- <6>[ 2.311706] IR Sony protocol handler initialized
- <6>[ 2.311828] IR RC5 (streamzap) protocol handler initialized
- <6>[ 2.312011] IR SANYO protocol handler initialized
- <6>[ 2.312103] IR MCE Keyboard/mouse protocol handler initialized
- <6>[ 2.312286] IR LIRC bridge handler initialized
- <6>[ 2.312957] gspca_main: v2.14.0 registered
- <6>[ 2.313537] usbcore: registered new interface driver uvcvideo
- <6>[ 2.313659] USB Video Class driver (1.1.1)
- <3>[ 2.315460] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
- <6>[ 2.316650] CAP1106: [cap1106_init]
- <4>[ 2.316802] i2c-core: driver [cap1106] using legacy suspend method
- <4>[ 2.317016] i2c-core: driver [cap1106] using legacy resume method
- <6>[ 2.340270] pm8xxx_tm_probe: OK
- <6>[ 2.341461] pm8xxx_tm_probe: OK
- <6>[ 2.343109] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>[ 2.344787] cpuidle: using governor ladder
- <6>[ 2.345031] cpuidle: using governor menu
- <6>[ 2.345886] mmc0: SDCC Version: 0x06000018
- <6>[ 2.347900] mmc0: bam physical base=0x12402000
- <6>[ 2.348022] mmc0: bam virtual base=0xf0334000
- <6>[ 2.348236] sps:BAM 0x12402000 is registered.
- <6>[ 2.348327] mmc0: BAM device registered. bam_handle=0xed96a600
- <6>[ 2.350341] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <6>[ 2.352081] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- <6>[ 2.352386] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- <3>[ 2.352539] mmc0: No card detect facilities available
- <6>[ 2.354492] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- <6>[ 2.354614] mmc0: Controller capabilities: 0x0000039a
- <6>[ 2.354797] mmc0: 8 bit data mode enabled
- <6>[ 2.354888] mmc0: 4 bit data mode disabled
- <6>[ 2.355010] mmc0: polling status mode disabled
- <6>[ 2.355194] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
- <6>[ 2.355316] mmc0: Slot eject status = 0
- <6>[ 2.355499] mmc0: Power save feature enable = 1
- <6>[ 2.355590] mmc0: SPS-BAM data transfer mode available
- <6>[ 2.360198] usbcore: registered new interface driver usbhid
- <6>[ 2.360290] usbhid: USB HID core driver
- <6>[ 2.361755] ashmem: initialized
- <6>[ 2.362396] logger: created 256K log 'log_main'
- <6>[ 2.362884] logger: created 256K log 'log_events'
- <6>[ 2.363372] logger: created 256K log 'log_radio'
- <6>[ 2.364013] logger: created 256K log 'log_system'
- <6>[ 2.365447] usbcore: registered new interface driver snd-usb-audio
- <3>[ 2.368103] tabla_probe
- <6>[ 2.371002] msm_pcm_probe: dev name msm-voip-dsp
- <6>[ 2.371734] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
- <6>[ 2.372131] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
- <6>[ 2.374359] msm_pcm_probe: dev name msm-pcm-dsp
- <6>[ 2.375244] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- <6>[ 2.375976] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- <6>[ 2.376373] adding pm_qos request in low latency driver
- <6>[ 2.376586] done adding pm_qos request in low latency driver
- <6>[ 2.378540] msm_compr_probe: dev name msm-compr-dsp
- <6>[ 2.379852] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- <3>[ 2.381927] msm8930_audio_init: Not the right machine type
- <3>[ 2.382141] msm_audio_init: Not the right machine type
- <6>[ 2.382507] msm_audio_init: Not APQ8064 in I2S mode
- <3>[ 2.482971] mmc0: unrecognised EXT_CSD revision 7
- <3>[ 2.483093] mmc0: error -22 whilst initialising MMC card
- <6>[ 2.543579] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 2.544738] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- <6>[ 2.546051] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- <6>[ 2.547271] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- <6>[ 2.548553] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- <6>[ 2.549621] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- <6>[ 2.550872] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- <6>[ 2.552032] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- <6>[ 2.553009] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- <6>[ 2.554351] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- <6>[ 2.555480] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- <6>[ 2.556640] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- <6>[ 2.557830] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- <6>[ 2.559173] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
- <6>[ 2.560241] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- <6>[ 2.562561] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
- <6>[ 2.568786] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
- <6>[ 2.569824] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
- <6>[ 2.570739] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
- <6>[ 2.571807] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- <6>[ 2.572631] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- <6>[ 2.573669] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- <6>[ 2.574584] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- <6>[ 2.575531] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- <6>[ 2.576568] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- <6>[ 2.577606] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- <6>[ 2.578613] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
- <6>[ 2.579620] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
- <6>[ 2.580566] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
- <6>[ 2.581634] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
- <6>[ 2.582641] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
- <6>[ 2.583801] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
- <6>[ 2.584777] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
- <6>[ 2.585876] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
- <6>[ 2.586730] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
- <6>[ 2.587615] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
- <6>[ 2.588836] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
- <6>[ 2.593109] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input2
- <6>[ 2.594055] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input3
- <6>[ 2.604217] headset_init+ #####
- <6>[ 2.605468] input: h2w button as /devices/virtual/input/input4
- <6>[ 2.606323] HEADSET: Headset detection mode
- <6>[ 2.658996] set_hs_micbias badgap status: OFF power down bandgap
- <6>[ 2.659484] headset_init- #####
- <6>[ 2.659851] u32 classifier
- <6>[ 2.660064] Actions configured
- <6>[ 2.660430] Netfilter messages via NETLINK v0.30.
- <6>[ 2.660675] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 2.662475] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 2.663818] TCP: cubic registered
- <6>[ 2.665161] NET: Registered protocol family 10
- <6>[ 2.672363] Mobile IPv6
- <6>[ 2.672637] IPv6 over IPv4 tunneling driver
- <6>[ 2.674133] NET: Registered protocol family 17
- <6>[ 2.674560] NET: Registered protocol family 15
- <6>[ 2.674987] L2TP core driver, V2.0
- <6>[ 2.675231] PPPoL2TP kernel driver, V2.0
- <5>[ 2.675598] Registering the dns_resolver key type
- <6>[ 2.676086] Bluetooth: RFCOMM socket layer initialized
- <6>[ 2.676483] Bluetooth: RFCOMM ver 1.11
- <6>[ 2.676727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 2.676940] Bluetooth: BNEP filters: protocol multicast
- <6>[ 2.677337] Bluetooth: BNEP socket layer initialized
- <6>[ 2.677551] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 2.677947] Bluetooth: HIDP socket layer initialized
- <6>[ 2.679779] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
- <5>[ 2.680419] Registering SWP/SWPB emulation handler
- <6>[ 2.680633] clock_late_init: Removing enables held for handed-off clocks
- <6>[ 2.688323] MSM Watchdog Initialized
- <6>[ 2.701782] AppArmor: AppArmor sha1 policy hashing enabled
- <7>[ 2.702423] gpio_set_debounce: gpio-26 status -22
- <7>[ 2.702545] gpio_set_debounce: gpio-155 status -22
- <7>[ 2.702606] gpio_set_debounce: gpio-189 status -22
- <6>[ 2.702819] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5
- <6>[ 2.703186] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2019-07-11 21:13:38 UTC (1562879618)
- <3>[ 2.703582] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
- <3>[ 2.703735] Unable to register core for 0
- <4>[ 2.703796] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
- <6>[ 2.704071] ALSA device list:
- <6>[ 2.704132] #0: apq8064-tabla-snd-card
- <6>[ 2.704864] Freeing init memory: 1036K
- <6>[ 2.704925] Write protecting the kernel text section c0008000 - c0dfe000
- <7>[ 3.849731] bq27541_get_psp status: Full ret= 0x0201
- <7>[ 3.850280] bq27541_get_psp status: Full ret= 0x0201
- <7>[ 3.850830] bq27541_get_psp voltage_now= 4291000 uV
- <7>[ 3.851379] bq27541_get_capacity = 100% ret= 100
- <7>[ 3.851959] bq27541_get_psp temperature= 276 (0.1¢XC)
- <7>[ 3.853057] bq27541_get_psp current = -92 mA
- <7>[ 3.940246] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73
- <7>[ 3.940612] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4294000
- <7>[ 3.940979] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 3.941284] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <3>[ 4.278320] init: could not import file '/init.recovery.flo.rc' from '/init.rc'
- <3>[ 4.279968] healthd: wakealarm_init: timerfd_create failed
- <7>[ 4.284759] bq27541_get_psp status: Full ret= 0x0201
- <7>[ 4.285308] bq27541_get_psp voltage_now= 4291000 uV
- <7>[ 4.285858] bq27541_get_capacity = 100% ret= 100
- <7>[ 4.286407] bq27541_get_psp temperature= 276 (0.1¢XC)
- <7>[ 4.287536] bq27541_get_psp current = -92 mA
- <3>[ 4.526672] init: cannot open '/initlogo.rle'
- <3>[ 4.527740] enable_store: android_usb: already disabled
- <3>[ 4.528564] init: Unable to open persistent property directory /data/property errno: 2
- <3>[ 4.530792] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
- <3>[ 4.530944] init: powerctl: cannot expand '${sys.powerctl}'
- <3>[ 4.531066] healthd: wakealarm_init: timerfd_create failed
- <6>[ 4.533721] adb_open
- <6>[ 4.533813] adb_bind_config
- <4>[ 4.546508] mipi_dsi_panel_power+, on=1
- <4>[ 4.629241] mipi_dsi_panel_power-
- <6>[ 4.634826] mipi_JDI_lcd_on+
- <6>[ 4.634826] mipi_JDI_lcd_on-, booting
- <3>[ 4.636535] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
- <6>[ 4.636566] android_work: android_work: did not send uevent (0 0 (null))
- <6>[ 4.657867] mipi_JDI_set_recovery_backlight: 100/255
- <6>[ 4.699584] mipi_JDI_lcd_off+
- <6>[ 4.699615] mipi_JDI_lcd_off-, set_recovery_bl_done, do nothing
- <4>[ 4.699615] mipi_dsi_panel_power+, on=0
- <6>[ 4.699615] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
- <4>[ 4.703308] mipi_dsi_panel_power+, on=1
- <6>[ 4.703308] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
- <6>[ 4.709442] mipi_JDI_lcd_on+
- <6>[ 4.709442] mipi_JDI_lcd_on-, set_recovery_bl_done, do nothing
- <6>[ 4.723022] android_work: android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 4.748962] android_usb gadget: high-speed config #1: android_usb
- <3>[ 4.749114] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
- <6>[ 4.749176] msm_otg msm_otg: Avail curr from USB = 500
- <6>[ 4.809326] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 6.849731] msm_ta_detect_work: USB exit ta detection - frindex
- <6>[ 54.609344] gpio_keys: Pressed KEY_VOLUMEDOWN
- <6>[ 54.819366] gpio_keys: Released KEY_VOLUMEDOWN
- <6>[ 55.049346] gpio_keys: Pressed KEY_VOLUMEDOWN
- <6>[ 55.199432] gpio_keys: Released KEY_VOLUMEDOWN
- <4>[ 61.960968] adbd (190): /proc/190/oom_adj is deprecated, please use /proc/190/oom_score_adj instead.
- <7>[ 64.170196] bq27541_get_psp status: Full ret= 0x0201
- <7>[ 64.170745] bq27541_get_psp status: Full ret= 0x0201
- <7>[ 64.171325] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 64.171875] bq27541_get_capacity = 100% ret= 100
- <7>[ 64.172424] bq27541_get_psp temperature= 277 (0.1¢XC)
- <7>[ 64.173553] bq27541_get_psp current = 0 mA
- <7>[ 64.174255] bq27541_get_capacity = 100% ret= 100
- <7>[ 64.174896] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 64.176116] bq27541_get_psp current = 0 mA
- <7>[ 64.176757] bq27541_get_psp temperature= 277 (0.1¢XC)
- <7>[ 64.177398] bq27541_get_psp status: Full ret= 0x0201
- <7>[ 64.260192] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 64.260467] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4291000
- <7>[ 64.260864] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 64.261138] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <7>[ 124.326019] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 124.326599] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 124.327148] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 124.327697] bq27541_get_capacity = 100% ret= 100
- <7>[ 124.328247] bq27541_get_psp temperature= 278 (0.1¢XC)
- <7>[ 124.329345] bq27541_get_psp current = 0 mA
- <7>[ 124.330047] bq27541_get_capacity = 100% ret= 100
- <7>[ 124.330688] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 124.331878] bq27541_get_psp current = 0 mA
- <7>[ 124.332519] bq27541_get_psp temperature= 278 (0.1¢XC)
- <7>[ 124.333160] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 124.420532] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 124.420776] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4295000
- <7>[ 124.421173] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 124.421447] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <7>[ 184.497802] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 184.498352] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 184.498901] bq27541_get_psp voltage_now= 4296000 uV
- <7>[ 184.499450] bq27541_get_capacity = 100% ret= 100
- <7>[ 184.500000] bq27541_get_psp temperature= 279 (0.1¢XC)
- <7>[ 184.501098] bq27541_get_psp current = 0 mA
- <7>[ 184.501800] bq27541_get_capacity = 100% ret= 100
- <7>[ 184.502441] bq27541_get_psp voltage_now= 4296000 uV
- <7>[ 184.503631] bq27541_get_psp current = 0 mA
- <7>[ 184.504272] bq27541_get_psp temperature= 279 (0.1¢XC)
- <7>[ 184.504913] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 184.580261] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 184.580535] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4295000
- <7>[ 184.580902] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 184.581207] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <7>[ 244.645416] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 244.645965] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 244.646514] bq27541_get_psp voltage_now= 4296000 uV
- <7>[ 244.647064] bq27541_get_capacity = 100% ret= 100
- <7>[ 244.647613] bq27541_get_psp temperature= 281 (0.1¢XC)
- <7>[ 244.648712] bq27541_get_psp current = 0 mA
- <7>[ 244.649414] bq27541_get_capacity = 100% ret= 100
- <7>[ 244.650054] bq27541_get_psp voltage_now= 4296000 uV
- <7>[ 244.651245] bq27541_get_psp current = 0 mA
- <7>[ 244.651885] bq27541_get_psp temperature= 281 (0.1¢XC)
- <7>[ 244.652526] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 244.740356] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 244.740600] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4296000
- <7>[ 244.740997] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 244.741271] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <7>[ 304.804962] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 304.805511] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 304.806060] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 304.806610] bq27541_get_capacity = 100% ret= 100
- <7>[ 304.807189] bq27541_get_psp temperature= 282 (0.1¢XC)
- <7>[ 304.808288] bq27541_get_psp current = 0 mA
- <7>[ 304.808990] bq27541_get_capacity = 100% ret= 100
- <7>[ 304.809631] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 304.810821] bq27541_get_psp current = 0 mA
- <7>[ 304.811492] bq27541_get_psp temperature= 282 (0.1¢XC)
- <7>[ 304.812133] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 304.900482] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 304.900726] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4296000
- <7>[ 304.901123] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 304.901397] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <7>[ 364.966918] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 364.967468] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 364.968048] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 364.968597] bq27541_get_capacity = 100% ret= 100
- <7>[ 364.969146] bq27541_get_psp temperature= 283 (0.1¢XC)
- <7>[ 364.970275] bq27541_get_psp current = 0 mA
- <7>[ 364.970947] bq27541_get_capacity = 100% ret= 100
- <7>[ 364.971588] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 364.972808] bq27541_get_psp current = 0 mA
- <7>[ 364.973449] bq27541_get_psp temperature= 283 (0.1¢XC)
- <7>[ 364.974090] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 365.060424] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 365.060699] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4295000
- <7>[ 365.061096] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 365.061370] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <7>[ 425.126647] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 425.127227] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 425.127777] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 425.128326] bq27541_get_capacity = 100% ret= 100
- <7>[ 425.128875] bq27541_get_psp temperature= 285 (0.1¢XC)
- <7>[ 425.130004] bq27541_get_psp current = 0 mA
- <7>[ 425.130676] bq27541_get_capacity = 100% ret= 100
- <7>[ 425.131347] bq27541_get_psp voltage_now= 4295000 uV
- <7>[ 425.132537] bq27541_get_psp current = 0 mA
- <7>[ 425.133178] bq27541_get_psp temperature= 285 (0.1¢XC)
- <7>[ 425.133819] bq27541_get_psp status: Full ret= 0x0200
- <7>[ 425.220611] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <7>[ 425.220855] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4295000
- <7>[ 425.221252] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <7>[ 425.221527] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement