API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 19th, 2019
308
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.54 KB | None | 0 0
raw download clone embed print report
  1.  
  2. ROM VER: 1.1.4
  3. CFG 05
  4.  
  5. ROM VER: 1.1.4
  6. CFG 05
  7.  
  8. DDR autotuning Rev 0.3ff
  9. DDR size from 0xa0000000 - 0xa3ffffff
  10. DDR check ok... start booting...
  11.  
  12.  
  13.  
  14. U-Boot 2010.06-LANTIQ-v-2.0.40-svn4782 (Oct 18 2013 - 14:18:54)
  15.  
  16. CLOCK CPU 500M RAM 250M
  17. DRAM: 64 MiB
  18. Using default environment
  19.  
  20. In: serial
  21. Out: serial
  22. Err: serial
  23. Net: Internal phy(GE) firmware version: 0x8434
  24. vr9 Switch8192 KiB W25Q64 at 0:3 is now current device
  25.  
  26.  
  27. Type "run flash_nfs" to mount root filesystem over NFS
  28.  
  29. Hit any key to stop autoboot: 1  0
  30. 8192 KiB W25Q64 at 0:3 is now current device
  31. 8192 KiB W25Q64 at 0:3 is now current device
  32. Uncompressing ...
  33. Starting kernel ...
  34.  
  35. Lantiq xDSL CPE VR9
  36. mips_hpt_frequency = 250000000, counter_resolution = 2
  37. Linux version 2.6.32.32 (root@localhost.localdomain) (gcc version 4.3.3 (GCC) ) #14 Thu Oct 17 12:16:25 HKT 2013
  38. phym = 04000000, mem = 04000000, max_pfn = 00004000
  39. Reserving memory for CP1 @0xa4000000, size 0x00000000
  40. CPU revision is: 00019556 (MIPS 34Kc)
  41. Determined physical RAM map:
  42. User-defined physical RAM map:
  43. memory: 04000000 @ 00000000 (usable)
  44. Initrd not found or empty - disabling initrd
  45. Zone PFN ranges:
  46. Normal 0x00000000 -> 0x00004000
  47. Movable zone start PFN for each node
  48. early_node_map[1] active PFN ranges
  49. 0: 0x00000000 -> 0x00004000
  50. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  51. Kernel command line: root=/dev/mtdblock2 rw rootfstype=squashfs ip=192.168.1.1:192.168.1.2::::eth0:on console=ttyS0,115200 ethaddr=AC:9A:96:F0:28:39 phym=64M mem=64M panic=1 mtdparts=ifx_sflash:128k(boot),1280k(kernel),6528k(rootfs),64k(config),64k(romfile),64k(rom),64k(radio) init=/sbin/init ethwan=
  52. PID hash table entries: 256 (order: -2, 1024 bytes)
  53. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  54. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  55. Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  56. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  57. Writing ErrCtl register=00010a40
  58. Readback ErrCtl register=00010a40
  59. Memory: 60596k/65536k available (2874k kernel code, 4864k reserved, 826k data, 184k init, 0k highmem)
  60. Hierarchical RCU implementation.
  61. NR_IRQS:185
  62. Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH
  63. console [ttyS0] enabled
  64. Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
  65. Mount-cache hash table entries: 512
  66. NET: Registered protocol family 16
  67. Lantiq PCI host controller driver, version 1.2.0, (c) 2001-2011 Lantiq Deutschland GmbH
  68. Lantiq PCIe Root Complex driver, version 1.5.3, (c) 2001-2011 Lantiq Deutschland GmbH
  69. bio: create slab <bio-0> at 0
  70. pci 0000:00:00.0: PME# supported from D1 D2
  71. pci 0000:00:00.0: PME# disabled
  72. ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
  73. pci 0000:01:00.0: PME# supported from D0 D3hot
  74. pci 0000:01:00.0: PME# disabled
  75. pci 0000:02:00.0: PME# supported from D0 D1 D3hot
  76. pci 0000:02:00.0: PME# disabled
  77. pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
  78. pci 0000:01:00.0: IO window: disabled
  79. pci 0000:01:00.0: MEM window: 0x1c000000-0x1c0fffff
  80. pci 0000:01:00.0: PREFETCH window: disabled
  81. NET: Registered protocol family 8
  82. NET: Registered protocol family 20
  83. Switching to clocksource MIPS
  84. NET: Registered protocol family 2
  85. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  86. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  87. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  88. TCP: Hash tables configured (established 2048 bind 2048)
  89. TCP reno registered
  90. NET: Registered protocol family 1
  91. gptu: totally 6 16-bit timers/counters
  92. gptu: misc_register on minor 63
  93. gptu: succeeded to request irq 118
  94. gptu: succeeded to request irq 119
  95. gptu: succeeded to request irq 120
  96. gptu: succeeded to request irq 121
  97. gptu: succeeded to request irq 122
  98. gptu: succeeded to request irq 123
  99. IFX DMA driver, version ifxmips_dma_core.c:v1.0.17
  100. ,(c)2009 Infineon Technologies AG
  101. Lantiq CGU driver, version 1.1.27, (c) 2001-2011 Lantiq Deutschland GmbH
  102. vpe1_mem = 0
  103. Wired TLB entries for Linux read_c0_wired() = 0
  104. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  105. Registering mini_fo version $Id$
  106. fuse init (API version 7.13)
  107. msgmni has been set to 118
  108. Line: 127, function: deu_init
  109. DMA Referenced PAGE_SIZE = 4096
  110. Infineon Technologies DEU driver version 2.0.0
  111. IFX DEU DES initialized (multiblock) (DMA).
  112. IFX DEU AES initialized (multiblock) (DMA).
  113. IFX DEU ARC4 initialized (multiblock) (DMA).
  114. IFX DEU SHA1 initialized (DMA).
  115. IFX DEU MD5 initialized (DMA).
  116. IFX DEU SHA1_HMAC initialized (DMA).
  117. IFX DEU MD5_HMAC initialized (DMA).
  118. io scheduler noop registered (default)
  119. ifx_pmu_init: Major 252
  120. Lantiq PMU driver, version 1.2.2, (c) 2001-2011 Lantiq Deutschland GmbH
  121. Lantiq GPIO driver, version 1.2.14, (c) 2001-2011 Lantiq Deutschland GmbH
  122. Infineon Technologies RCU driver version 1.0.8
  123. Lantiq LED Controller driver, version 1.0.6, (c) 2001-2011 Lantiq Deutschland GmbH
  124. MEI CPE Driver, Version 1.2.0
  125.  
  126.  
  127. (c) Copyright 2009, Infineon Technologies AG
  128.  
  129.  
  130. ### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
  131.  
  132.  
  133. ttyS0 at MMIO 0xbe100c00 (irq = 105) is a IFX_ASC
  134. Register ASC (UART) to PMCU.
  135. Lantiq ASC (UART) driver, version 1.0.9, (c) 2001-2011 Lantiq Deutschland GmbH
  136. brd: module loaded
  137. loop: module loaded
  138. Lantiq SSC driver, version 2.2.6, (c) 2001-2011 Lantiq Deutschland GmbH
  139. Register flash device:flash0
  140. 7 cmdlinepart partitions found on MTD device ifx_sflash
  141. Creating 7 MTD partitions on "ifx_sflash":
  142. 0x000000000000-0x000000020000 : "boot"
  143. 0x000000020000-0x000000160000 : "kernel"
  144. 0x000000160000-0x0000007c0000 : "rootfs"
  145. mtd: partition "rootfs" set to be root filesystem
  146. 0x0000007c0000-0x0000007d0000 : "config"
  147. 0x0000007d0000-0x0000007e0000 : "romfile"
  148. 0x0000007e0000-0x0000007f0000 : "rom"
  149. 0x0000007f0000-0x000000800000 : "radio"
  150. Lantiq SPI flash driver, version 1.1.9, (c) 2001-2011 Lantiq Deutschland GmbH
  151. ifxmips_gpio: Pin ID 10 (port 0, pin 10) has been reserved by module SFLASH from kernel module!
  152. ifx_dataflash_init status error 255
  153. PPP generic driver version 2.4.2
  154. NET: Registered protocol family 24
  155. IFX SWITCH API, Version 1.1.7.2
  156. SWAPI: Registered character device [switch_api] with major no [81]
  157. Switch API: PCE MicroCode loaded !!
  158. Init IFX_ETHSW_Switch_API_procModule successfully.
  159. Switch Auto Polling value = 0
  160. GPHY FW load for A2x !!
  161. GPHY FIRMWARE LOAD SUCCESSFULLY AT ADDR : 400000
  162. IFX GPHY driver GE Mode, version ifxmips_vr9_gphy: V0.9 - Firmware: 8434
  163. Registered led device: broadband_led
  164. Registered led device: internet_led
  165. Registered led device: usb1_link_led
  166. Registered led device: usb2_link_led
  167. Lantiq LED driver, version 1.0.17, (c) 2001-2011 Lantiq Deutschland GmbH
  168. Mirror/redirect action on
  169. u32 classifier
  170. Actions configured
  171. Netfilter messages via NETLINK v0.30.
  172. nf_conntrack version 0.5.0 (948 buckets, 5120 max)
  173. CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  174. nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  175. sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  176. ctnetlink v0.93: registering with nfnetlink.
  177. GRE over IPv4 tunneling driver
  178. ip_tables: (C) 2000-2006 Netfilter Core Team
  179. TCP cubic registered
  180. NET: Registered protocol family 10
  181. ip6_tables: (C) 2000-2006 Netfilter Core Team
  182. IPv6 over IPv4 tunneling driver
  183. NET: Registered protocol family 17
  184. NET: Registered protocol family 15
  185. Bridge firewalling registered
  186. Ebtables v2.0 registered
  187. NET: Registered protocol family 8
  188. atmpvc_init() failed with -17
  189. KOAM is loaded successfully.
  190. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  191. All bugs added by David S. Miller <davem@redhat.com>
  192. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  193. Freeing unused kernel memory: 184k freed
  194.  
  195. starting pid 190, tty '': '/etc/init.d/rcS'
  196. SCSI subsystem initialized
  197. usbcore: registered new interface driver usbfs
  198. usbcore: registered new interface driver hub
  199. usbcore: registered new device driver usb
  200. Initializing USB Mass Storage driver...
  201. usbcore: registered new interface driver usb-storage
  202. USB Mass Storage support registered.
  203. IFXUSB: ifxusb_hcd: version 3.2 B120208
  204. Chip Version :0002 BurstSize=4
  205. IFXUSB: USB core #0 soft-reset
  206. IFXUSB: USB core #0 soft-reset
  207. ifxusb_hcd ifxusb_hcd: IFX USB Controller
  208. ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1
  209. ifxusb_hcd ifxusb_hcd: irq 54, io mem 0xbe101000
  210. IFXUSB: Init: Power Port (0)
  211. usb usb1: configuration #1 chosen from 1 choice
  212. hub 1-0:1.0: USB hub found
  213. hub 1-0:1.0: 1 port detected
  214. IFXUSB: USB core #1 soft-reset
  215. IFXUSB: USB core #1 soft-reset
  216. ifxusb_hcd ifxusb_hcd: IFX USB Controller
  217. ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2
  218. ifxusb_hcd ifxusb_hcd: irq 83, io mem 0xbe106000
  219. IFXUSB: Init: Power Port (0)
  220. usb usb2: configuration #1 chosen from 1 choice
  221. hub 2-0:1.0: USB hub found
  222. hub 2-0:1.0: 1 port detected
  223.  
  224. Please press Enter to activate this console. [ dm_readFile ] 2042: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
  225. Loading A5 (MII0/1 + ATM) driver ...... MAC-0: e8-de-27-4e-05-59
  226. MAC-1: e8-de-27-4e-05-5a
  227. Succeeded!
  228. PPE datapath driver info:
  229. Version ID: 64.3.7.1.0.1.4
  230. Family : VR9
  231. DR Type : Normal Data Path | Indirect-Fast Path
  232. Interface : MII0 | MII1 | ATM
  233. Mode : Routing
  234. Release : 0.1.4
  235. PPE firmware info:
  236. Version ID: 7.2.4.6.2.0
  237. Family : VR9
  238. FW Type : Acceleration
  239. Interface : MII0/1 + ATM
  240. Mode : Bridging + IPv4 Routing
  241. Release : 2.0
  242. IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
  243.  
  244.  
  245.  
  246. Lantiq CPE API Driver version: DSL CPE API V4.11.4
  247.  
  248. Predefined debug level: 3
  249. ifx_ppa_api: module license 'unspecified' taints kernel.
  250. Disabling lock debugging due to kernel taint
  251. PPA API --- init successfully
  252. ifx_ppa_init - init succeeded
  253. sendto: No such file or directory
  254. send 2001 error 253, -1
  255. [ oal_sys_getOldTZInfo ] 330: Open TZ file error!
  256. ioctl: No such device
  257. device eth0 entered promiscuous mode
  258. br0: port 1(eth0) entering forwarding state
  259. Error: the prot was not in the member
  260. *********cal_data*******
  261. a55a00000000000000000000*********end*******
  262. ath_hal: 0.9.17.1 (AR5212, AR5416, AR9380, RF5111, RF5112, RF2413, RF5413, RF2316, RF2317, REGOPS_FUNC, WRITE_EEPROM, 11D)
  263. ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  264. ath_dfs: Version 2.0.0
  265. Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  266. ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  267. ath_pci: 9.2.0_U10.1020 (Atheros/multi-bss)
  268. __ath_attach: Set global_scn[0]
  269. ACBKMinfree = 48
  270. ACBEMinfree = 32
  271. ACVIMinfree = 16
  272. ACVOMinfree = 0
  273. CABMinfree = 48
  274. UAPSDMinfree = 0
  275.  
  276. @@@@@@@@@@@@@devid = ff1c@@@@@@@@
  277.  
  278. @@@@@@@@@@@@@devid = 2e@@@@@@@@
  279. CalData[0] = 0xa5
  280. CalData[1] = 0x5a
  281. CalData[2] = 0x0
  282. CalData[3] = 0x0
  283. CalData[4] = 0x0
  284. CalData[5] = 0x3
  285. CalData[6] = 0x60
  286. CalData[7] = 0x0
  287. CalData[8] = 0x16
  288. CalData[9] = 0x8c
  289. CalData[10] = 0x0
  290. CalData[11] = 0x2d
  291. CalData[12] = 0x60
  292. CalData[13] = 0x8
  293. CalData[14] = 0x0
  294. CalData[15] = 0x1
  295. CalData[16] = 0x2
  296. CalData[17] = 0x80
  297. CalData[18] = 0x60
  298. CalData[19] = 0x2c
  299. CalData[20] = 0x16
  300. CalData[21] = 0x8c
  301. CalData[22] = 0xa1
  302. CalData[23] = 0x99
  303. CalData[24] = 0x50
  304. CalData[25] = 0x0
  305. CalData[26] = 0x16
  306. CalData[27] = 0x8c
  307. CalData[28] = 0x0
  308. CalData[29] = 0x2e
  309. CalData[30] = 0x50
  310. CalData[31] = 0x8
  311. CalData[32] = 0x0
  312. CalData[33] = 0x1
  313. CalData[34] = 0x2
  314. CalData[35] = 0x80
  315. CalData[36] = 0x50
  316. CalData[37] = 0x2c
  317. CalData[38] = 0x16
  318. CalData[39] = 0x8c
  319. CalData[40] = 0xa1
  320. CalData[41] = 0x99
  321. CalData[42] = 0x50
  322. CalData[43] = 0x64
  323. CalData[44] = 0x8c
  324. CalData[45] = 0xc0
  325. CalData[46] = 0x5
  326. CalData[47] = 0x4
  327. CalData[48] = 0x57
  328. CalData[49] = 0xc
  329. CalData[50] = 0x3f
  330. CalData[51] = 0x1
  331. CalData[52] = 0x22
  332. CalData[53] = 0x0
  333. CalData[54] = 0x50
  334. CalData[55] = 0x6c
  335. CalData[56] = 0x3c
  336. CalData[57] = 0x11
  337. CalData[58] = 0x0
  338. CalData[59] = 0x3
  339. CalData[60] = 0x40
  340. CalData[61] = 0x4
  341. CalData[62] = 0x5
  342. CalData[63] = 0xb
  343. CalData[64] = 0x0
  344. CalData[65] = 0x4a
  345. CalData[66] = 0x40
  346. CalData[67] = 0x74
  347. CalData[68] = 0x0
  348. CalData[69] = 0x3
  349. CalData[70] = 0x0
  350. CalData[71] = 0x0
  351. CalData[72] = 0x40
  352. CalData[73] = 0x0
  353. CalData[74] = 0x50
  354. CalData[75] = 0x1
  355. CalData[76] = 0x1
  356. CalData[77] = 0xc2
  357. CalData[78] = 0x60
  358. CalData[79] = 0x34
  359. CalData[80] = 0x0
  360. CalData[81] = 0x44
  361. CalData[82] = 0x0
  362. CalData[83] = 0x0
  363. CalData[84] = 0x51
  364. CalData[85] = 0xc
  365. CalData[86] = 0x20
  366. CalData[87] = 0x10
  367. CalData[88] = 0x0
  368. CalData[89] = 0x6
  369. CalData[90] = 0x51
  370. CalData[91] = 0x64
  371. CalData[92] = 0x14
  372. CalData[93] = 0x12
  373. CalData[94] = 0xff
  374. CalData[95] = 0x24
  375. CalData[96] = 0x51
  376. CalData[97] = 0x68
  377. CalData[98] = 0x17
  378. CalData[99] = 0xff
  379. CalData[100] = 0x0
  380. CalData[101] = 0x15
  381. CalData[102] = 0x50
  382. CalData[103] = 0x68
  383. CalData[104] = 0x20
  384. CalData[105] = 0x10
  385. CalData[106] = 0x0
  386. CalData[107] = 0x19
  387. CalData[108] = 0xff
  388. CalData[109] = 0xff
  389. CalData[110] = 0xff
  390. CalData[111] = 0xff
  391. CalData[112] = 0xff
  392. CalData[113] = 0xff
  393. CalData[114] = 0xff
  394. CalData[115] = 0xff
  395. CalData[116] = 0xff
  396. CalData[117] = 0xff
  397. CalData[118] = 0xff
  398. CalData[119] = 0xff
  399. CalData[120] = 0xff
  400. CalData[121] = 0xff
  401. CalData[122] = 0xff
  402. CalData[123] = 0xff
  403. CalData[124] = 0xff
  404. CalData[125] = 0xff
  405. CalData[126] = 0xff
  406. CalData[127] = 0xff
  407. CalData[128] = 0xff
  408. CalData[129] = 0xff
  409. CalData[130] = 0xff
  410. CalData[131] = 0xff
  411. CalData[132] = 0xff
  412. CalData[133] = 0xff
  413. CalData[134] = 0xff
  414. CalData[135] = 0xff
  415. CalData[136] = 0xff
  416. CalData[137] = 0xff
  417. CalData[138] = 0xff
  418. CalData[139] = 0xff
  419. CalData[140] = 0xff
  420. CalData[141] = 0xff
  421. CalData[142] = 0xff
  422. CalData[143] = 0xff
  423. CalData[144] = 0xff
  424. CalData[145] = 0xff
  425. CalData[146] = 0xff
  426. CalData[147] = 0xff
  427. CalData[148] = 0xff
  428. CalData[149] = 0xff
  429. CalData[150] = 0xff
  430. CalData[151] = 0xff
  431. CalData[152] = 0xff
  432. CalData[153] = 0xff
  433. CalData[154] = 0xff
  434. CalData[155] = 0xff
  435. CalData[156] = 0xff
  436. CalData[157] = 0xff
  437. CalData[158] = 0xff
  438. CalData[159] = 0xff
  439. CalData[160] = 0xff
  440. CalData[161] = 0xff
  441. CalData[162] = 0xff
  442. CalData[163] = 0xff
  443. CalData[164] = 0xff
  444. CalData[165] = 0xff
  445. CalData[166] = 0xff
  446. CalData[167] = 0xff
  447. CalData[168] = 0xff
  448. CalData[169] = 0xff
  449. CalData[170] = 0xff
  450. CalData[171] = 0xff
  451. CalData[172] = 0xff
  452. CalData[173] = 0xff
  453. CalData[174] = 0xff
  454. CalData[175] = 0xff
  455. CalData[176] = 0xff
  456. CalData[177] = 0xff
  457. CalData[178] = 0xff
  458. CalData[179] = 0xff
  459. CalData[180] = 0xff
  460. CalData[181] = 0xff
  461. CalData[182] = 0xff
  462. CalData[183] = 0xff
  463. CalData[184] = 0xff
  464. CalData[185] = 0xff
  465. CalData[186] = 0xff
  466. CalData[187] = 0xff
  467. CalData[188] = 0xff
  468. CalData[189] = 0xff
  469. CalData[190] = 0xff
  470. CalData[191] = 0xff
  471. CalData[192] = 0xff
  472. CalData[193] = 0xff
  473. CalData[194] = 0xff
  474. CalData[195] = 0xff
  475. CalData[196] = 0xff
  476. CalData[197] = 0xff
  477. CalData[198] = 0xff
  478. CalData[199] = 0xffdfs_attach: use DFS enhancements
  479. DFS min filter rssiThresh = 18
  480. DFS max pulse dur = 151 ticks
  481. ath_get_caps[5105] rx chainmask mismatch actual 3 sc_chainmak 0
  482. ath_get_caps[5080] tx chainmask mismatch actual 3 sc_chainmak 0
  483. Register wlan WPS function, dev=0x82898000
  484. Register wlan button on function
  485. Register wlan button off function
  486. wifi0: Atheros ???: mem=0x1c000000, irq=136 hw_base=0xbc000000
  487. ath_netdev_set_macaddr: ffffffe8:ffffffde:27:4e:05:59
  488. ni aponly is null!
  489. wlan_vap_create : enter. devhandle=0x828982c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
  490. wlan_vap_create : exit. devhandle=0x828982c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  491. VAP device ath0 created
  492. ath0
  493. wlan_vap_create : enter. devhandle=0x828982c0, opmode=IEEE80211_M_STA, flags=0x3
  494. wlan_vap_create : exit. devhandle=0x828982c0, opmode=IEEE80211_M_STA, flags=0x3.
  495. VAP device ath1 created
  496. ath1
  497. wlan_vap_create : enter. devhandle=0x828982c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
  498. wlan_vap_create : exit. devhandle=0x828982c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  499. VAP device ath2 created
  500. ath2
  501. ni aponly is null!
  502.  
  503. DES SSID SET=24GHz
  504. DFS min filter rssiThresh = 15
  505. DFS max pulse dur = 151 ticks
  506. WARNING: Fragmentation with HT mode NOT ALLOWED!!
  507. Error for wireless request "Set Fragmentation Threshold" (8B24) :
  508. SET failed on device ath0 ; Invalid argument.
  509.  
  510. DES SSID SET=TP-LINK_Guest_2.4G_4E0559
  511. Before hook ppa
  512. PPA REG DONE, if_id=3, dev_if_index = 11
  513. Reading topology file /var/Wireless/2_4G_topology.conf ...
  514. 015.174: Reading radio configuration file /var/Wireless/2_4G_80211g.ap_radio ...
  515.  
  516. 015.175: Reading bss configuration file /var/Wireless/ath0.ap_bss ...
  517.  
  518. ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1
  519. sh: grep: not found
  520. Using interface ath0 with hwaddr e8:de:27:4e:05:59 and ssid '24GHz'
  521. ni aponly is null!
  522.  
  523. DES SSID SET=24GHz
  524. ni aponly is null!
  525. l2_packet_receive - recvfrom: Network is down
  526. device ath0 entered promiscuous mode
  527. br0: port 2(ath0) entering forwarding state
  528. device ath1 entered promiscuous mode
  529. device ath2 entered promiscuous mode
  530. [4294688536] mtlk0(mtlk_cdev_init:316): Max nodex set to 1048575
  531. [4294689686] mtlk0(__mtlk_print_endianess:3867): The system is Big endian (0xbeadfeed, 0xedfeadbe)
  532. [4294689696] mtlk0(mtlk_fast_mem_print_info:105): Using normal memory for hot context
  533. [4294689706] mtlk0(_mtlk_df_user_alloc_devname:6679): NDEV Name pattern: wlan%d
  534. [4294689706] mtlk0(mtlk_core_pdb_fast_handles_open:33): Open Hot-path parameters
  535. [4294689716] mtlk<4>(_mtlk_core_get_max_stas_supported_by_fw:3227): Cannot get MAX STAs supported by FW. Forcing default
  536. mtlk 0000:00:0e.0: firmware: requesting ap_upper.bin
  537. mtlk 0000:00:0e.0: firmware: requesting contr_lm.bin
  538. [4294690516] mtlk0(_mtlk_core_start:9009): CID-0000: Driver version: 3.2.1.1.48.4782M.branches/linux_DBN600.PciG3.PcieG3.Release
  539. MAC/PHY versions:
  540. ap_upper.bin: @@@ VERSION INFO @@@ version number: FW_3.2.1_r5437 MIPS: Upper CPU(TMC AGG AP) interface: PCI phy type: real phy on Mar 28 2012 at 11:00:01@@@ END @@@
  541. contr_lm.bin: @@@ VERSION INFO @@@ version number: FW_3.2.1_r5437 MIPS: Lower MAC interface: -- phy type: real phy on Mar 28 2012 at 10:59:46@@@ END @@@
  542.  
  543. [4294691676] mtlk0(mtlk_eeprom_check_ee_data:2094): Options mask is 0x00
  544. [4294691686] mtlk0(load_default_hw_table:1754): HW configuration is 3X3
  545. [4294691716] mtlk0(_mtlk_core_mbss_add_vap:5747): CID-0000: Got PRM_ID_VAP_ADD
  546. [4294691726] mtlk0(_mtlk_df_user_alloc_devname:6679): NDEV Name pattern: wlan0.0
  547. [4294691736] mtlk0(mtlk_core_pdb_fast_handles_open:33): Open Hot-path parameters
  548. [4294691736] mtlk0(_mtlk_core_start:9009): CID-0001: Driver version: 3.2.1.1.48.4782M.branches/linux_DBN600.PciG3.PcieG3.Release
  549. MAC/PHY versions:
  550. ap_upper.bin: @@@ VERSION INFO @@@ version number: FW_3.2.1_r5437 MIPS: Upper CPU(TMC AGG AP) interface: PCI phy type: real phy on Mar 28 2012 at 11:00:01@@@ END @@@
  551. contr_lm.bin: @@@ VERSION INFO @@@ version number: FW_3.2.1_r5437 MIPS: Lower MAC interface: -- phy type: real phy on Mar 28 2012 at 10:59:46@@@ END @@@
  552.  
  553. [4294691796] mtlk0(_mtlk_core_mbss_add_vap:5757): CID-0000: VAP#1 added
  554. Invalid command : sMaxConnections
  555. !!!!PPA device function is registered (id=4)
  556. [4294692156] mtlk0(_mtlk_df_user_ppa_register:479): PPA device function is registered (id=4)
  557. [4294692166] mtlk0(_mtlk_core_mbss_is_rescan_exempted:2116): Re-Scan cannot be exempted (AOCS type = 2)
  558. [4294692176] mtlk0(mtlk_mbss_init:2736): CID-0000: _mtlk_core_mbss_check_activation_params returned successfully
  559. [4294692186] mtlk0(_mtlk_mbss_send_preactivate:2188): CID-0000: Pre-activation started with parameters:
  560. [4294692196] mtlk0(mtlk_core_configuration_dump:10284): CID-0000: Country : DE
  561. [4294692206] mtlk0(mtlk_core_configuration_dump:10285): CID-0000: Domain : 52
  562. [4294692216] mtlk0(mtlk_core_configuration_dump:10286): CID-0000: Network mode : 802.11an
  563. [4294692226] mtlk0(mtlk_core_configuration_dump:10287): CID-0000: Band : 5.2
  564. [4294692226] mtlk0(mtlk_core_configuration_dump:10288): CID-0000: Prog Model Spectrum : 40 MHz
  565. [4294692236] mtlk0(mtlk_core_configuration_dump:10289): CID-0000: Selected Spectrum : 40 MHz
  566. [4294692246] mtlk0(mtlk_core_configuration_dump:10290): CID-0000: Bonding : 0
  567. [4294692256] mtlk0(mtlk_core_configuration_dump:10291): CID-0000: HT mode : enabled
  568. [4294692266] mtlk0(mtlk_core_configuration_dump:10293): CID-0000: SM enabled : enabled
  569. [4294692276] mtlk0(_mtlk_mbss_send_preactivate:2199): CID-0000: Start AOCS
  570. [4294692276] mtlk0(_mtlk_mbss_send_preactivate:2211): CID-0000: ap_scan_band_cfg = 0
  571. [4294692286] mtlk0(_mtlk_core_perform_initial_scan:2056): CID-0000: AOCS is ON (ch=0 type=2): doing the Initial Scan
  572. [4294692296] mtlk0(_mtlk_core_perform_initial_scan:2059): CID-0000: Initial scan started SPECTRUM_40MHZ
  573. [4294692306] mtlk0(do_scan:535): Starting normal scan...
  574. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB.bin
  575. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB_38_RevA.bin
  576. [4294694766] mtlk0(_mtlk_core_perform_initial_scan:2067): CID-0000: Initial scan started SPECTRUM_20MHZ
  577. [4294694766] mtlk0(do_scan:535): Starting normal scan...
  578. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_nCB.bin
  579. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_nCB_38_RevA.bin
  580. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB.bin
  581. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB_38_RevA.bin
  582. [4294699906] mtlk0(_mtlk_channels_frequency_element_dump:2679): CID-0000: Channel : 44
  583. [4294699906] mtlk0(_mtlk_channels_frequency_element_dump:2680): CID-0000: ChannelACT : 0
  584. [4294699916] mtlk0(_mtlk_channels_frequency_element_dump:2681): CID-0000: ScanType : 0
  585. [4294699926] mtlk0(_mtlk_channels_frequency_element_dump:2682): CID-0000: ChannelSwCnt : 0
  586. [4294699936] mtlk0(_mtlk_channels_frequency_element_dump:2683): CID-0000: SwitchMode : 16
  587. [4294699936] mtlk0(_mtlk_channels_frequency_element_dump:2684): CID-0000: SmRequired : 0
  588. [4294699946] mtlk0(_mtlk_channels_frequency_element_dump:2685): CID-0000: CbTxPowerLim : 144
  589. [4294699956] mtlk0(_mtlk_channels_frequency_element_dump:2686): CID-0000: nCbTxPowerLim : 144
  590. [4294699966] mtlk0(_mtlk_channels_frequency_element_dump:2687): CID-0000: AntennaGain : 0
  591. [4294699976] mtlk0(_mtlk_channels_frequency_element_dump:2688): CID-0000: ChannelLoad : 0
  592. [4294699986] mtlk0(_mtlk_channels_frequency_element_dump:2690): CID-0000: MaxTxPwr[0] : 0
  593. [4294699986] mtlk0(_mtlk_channels_frequency_element_dump:2691): CID-0000: MaxTxPwrIdx[0] : 0
  594. [4294699996] mtlk0(_mtlk_channels_frequency_element_dump:2690): CID-0000: MaxTxPwr[1] : 0
  595. [4294700006] mtlk0(_mtlk_channels_frequency_element_dump:2691): CID-0000: MaxTxPwrIdx[1] : 0
  596. [4294700016] mtlk0(_mtlk_channels_frequency_element_dump:2690): CID-0000: MaxTxPwr[2] : 0
  597. [4294700026] mtlk0(_mtlk_channels_frequency_element_dump:2691): CID-0000: MaxTxPwrIdx[2] : 0
  598. [4294700026] mtlk0(_mtlk_channels_frequency_element_dump:2693): CID-0000: SwitchType : 0
  599. [4294700146] mtlk0(_mtlk_mbss_send_preactivate:2333): CID-0000: mtlk_txmm_msg_send_blocked, MsgId = 0x451
  600. [4294700306] mtlk0(_mtlk_mbss_send_preactivate:2352): CID-0000: _mtlk_mbss_send_preactivate returned successfully
  601. [4294700316] mtlk0(mtlk_mbss_init:2743): CID-0000: _mtlk_mbss_send_preactivate_if_needed returned successfully
  602. [4294700326] mtlk0(mtlk_mbss_send_vap_activate:2415): CID-0000: Entering mtlk_mbss_send_vap_activate
  603. [4294700336] mtlk0(mtlk_mbss_send_vap_activate:2422): CID-0000: Start activation
  604. [4294700346] mtlk0(mtlk_dump:61): dump of UMI_ACTIVATE_VAP:
  605. cp= 0x82bdaee0 l=132
  606. 0000: e8 de 27 4e 05 5b 00 00 02 00 00 00 04 00 00 00
  607. 0010: 35 47 48 7a 00 00 00 00 00 00 00 00 00 00 00 00
  608. 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  609. 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  610. 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  611. 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  612. 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  613. 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  614. 0080: 00 00 00 00
  615. [4294700396] mtlk0(mtlk_mbss_send_vap_activate:2473): CID-0000: UMI_ACTIVATE_VAP
  616. [4294700396] mtlk0(mtlk_mbss_send_vap_activate:2474): CID-0000: sBSSID = E8:DE:27:4E:05:5B
  617. [4294700406] mtlk0(mtlk_mbss_send_vap_activate:2475): CID-0000: sSSID = 5GHz
  618. [4294700416] mtlk0(mtlk_mbss_send_vap_activate:2476): CID-0000: Hidden = 0
  619. [4294700426] mtlk0(mtlk_dump:61): sRSNie =
  620. cp= 0x82bdaf14 l=80
  621. 0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  622. 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  623. 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  624. 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  625. 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  626. [4294700456] mtlk0(mtlk_mbss_send_vap_activate:2480): CID-0000: mtlk_txmm_msg_send, MsgId = 0x453, ESSID = 5GHz
  627. [4294700466] mtlk0(mtlk_mbss_init:2750): CID-0000: mtlk_mbss_send_vap_activate returned successfully
  628. Configuration file: /var/Wireless/wlan0.ap_bss
  629. [4294701066] mtlk0(mtlk_df_ui_linux_ioctl_setmlme:632): You should bring interface up first
  630. ioctl[SIOCSIWMLME]: Operation not supported
  631. Using interface wlan0 with hwaddr e8:de:27:4e:05:5b and ssid '5GHz'
  632. [4294701336] mtlk0(_mtlk_core_mbss_is_rescan_exempted:2116): Re-Scan cannot be exempted (AOCS type = 2)
  633. [4294701346] mtlk0(mtlk_mbss_init:2736): CID-0000: _mtlk_core_mbss_check_activation_params returned successfully
  634. [4294701356] mtlk0(_mtlk_mbss_send_preactivate:2188): CID-0000: Pre-activation started with parameters:
  635. [4294701366] mtlk0(mtlk_core_configuration_dump:10284): CID-0000: Country : DE
  636. [4294701376] mtlk0(mtlk_core_configuration_dump:10285): CID-0000: Domain : 52
  637. [4294701386] mtlk0(mtlk_core_configuration_dump:10286): CID-0000: Network mode : 802.11an
  638. [4294701396] mtlk0(mtlk_core_configuration_dump:10287): CID-0000: Band : 5.2
  639. [4294701396] mtlk0(mtlk_core_configuration_dump:10288): CID-0000: Prog Model Spectrum : 40 MHz
  640. [4294701406] mtlk0(mtlk_core_configuration_dump:10289): CID-0000: Selected Spectrum : 40 MHz
  641. [4294701416] mtlk0(mtlk_core_configuration_dump:10290): CID-0000: Bonding : 0
  642. [4294701426] mtlk0(mtlk_core_configuration_dump:10291): CID-0000: HT mode : enabled
  643. [4294701436] mtlk0(mtlk_core_configuration_dump:10293): CID-0000: SM enabled : enabled
  644. [4294701446] mtlk0(_mtlk_mbss_send_preactivate:2199): CID-0000: Start AOCS
  645. [4294701446] mtlk0(_mtlk_mbss_send_preactivate:2211): CID-0000: ap_scan_band_cfg = 0
  646. [4294701456] mtlk0(_mtlk_core_perform_initial_scan:2056): CID-0000: AOCS is ON (ch=0 type=2): doing the Initial Scan
  647. [4294701466] mtlk0(_mtlk_core_perform_initial_scan:2059): CID-0000: Initial scan started SPECTRUM_40MHZ
  648. [4294701476] mtlk0(do_scan:535): Starting normal scan...
  649. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB.bin
  650. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB_38_RevA.bin
  651. [4294703886] mtlk0(_mtlk_core_perform_initial_scan:2067): CID-0000: Initial scan started SPECTRUM_20MHZ
  652. [4294703886] mtlk0(do_scan:535): Starting normal scan...
  653. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_nCB.bin
  654. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_nCB_38_RevA.bin
  655. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB.bin
  656. mtlk 0000:00:0e.0: firmware: requesting ProgModel_A_CB_38_RevA.bin
  657. [4294709036] mtlk0(_mtlk_channels_frequency_element_dump:2679): CID-0000: Channel : 44
  658. [4294709046] mtlk0(_mtlk_channels_frequency_element_dump:2680): CID-0000: ChannelACT : 0
  659. [4294709046] mtlk0(_mtlk_channels_frequency_element_dump:2681): CID-0000: ScanType : 0
  660. [4294709056] mtlk0(_mtlk_channels_frequency_element_dump:2682): CID-0000: ChannelSwCnt : 0
  661. [4294709066] mtlk0(_mtlk_channels_frequency_element_dump:2683): CID-0000: SwitchMode : 16
  662. [4294709076] mtlk0(_mtlk_channels_frequency_element_dump:2684): CID-0000: SmRequired : 0
  663. [4294709086] mtlk0(_mtlk_channels_frequency_element_dump:2685): CID-0000: CbTxPowerLim : 144
  664. [4294709086] mtlk0(_mtlk_channels_frequency_element_dump:2686): CID-0000: nCbTxPowerLim : 144
  665. [4294709096] mtlk0(_mtlk_channels_frequency_element_dump:2687): CID-0000: AntennaGain : 0
  666. [4294709106] mtlk0(_mtlk_channels_frequency_element_dump:2688): CID-0000: ChannelLoad : 0
  667. [4294709116] mtlk0(_mtlk_channels_frequency_element_dump:2690): CID-0000: MaxTxPwr[0] : 0
  668. [4294709126] mtlk0(_mtlk_channels_frequency_element_dump:2691): CID-0000: MaxTxPwrIdx[0] : 0
  669. [4294709136] mtlk0(_mtlk_channels_frequency_element_dump:2690): CID-0000: MaxTxPwr[1] : 0
  670. [4294709136] mtlk0(_mtlk_channels_frequency_element_dump:2691): CID-0000: MaxTxPwrIdx[1] : 0
  671. [4294709146] mtlk0(_mtlk_channels_frequency_element_dump:2690): CID-0000: MaxTxPwr[2] : 0
  672. [4294709156] mtlk0(_mtlk_channels_frequency_element_dump:2691): CID-0000: MaxTxPwrIdx[2] : 0
  673. [4294709166] mtlk0(_mtlk_channels_frequency_element_dump:2693): CID-0000: SwitchType : 0
  674. [4294709276] mtlk0(_mtlk_mbss_send_preactivate:2333): CID-0000: mtlk_txmm_msg_send_blocked, MsgId = 0x451
  675. [4294709436] mtlk0(_mtlk_mbss_send_preactivate:2352): CID-0000: _mtlk_mbss_send_preactivate returned successfully
  676. [4294709446] mtlk0(mtlk_mbss_init:2743): CID-0000: _mtlk_mbss_send_preactivate_if_needed returned successfully
  677. [4294709456] mtlk0(mtlk_mbss_send_vap_activate:2415): CID-0000: Entering mtlk_mbss_send_vap_activate
  678. [4294709466] mtlk0(mtlk_mbss_send_vap_activate:2422): CID-0000: Start activation
  679. [4294709476] mtlk0(mtlk_dump:61): dump of UMI_ACTIVATE_VAP:
  680. cp= 0x82bd9c40 l=132
  681. 0000: e8 de 27 4e 05 5b 00 00 02 00 00 00 04 00 00 00
  682. 0010: 35 47 48 7a 00 00 00 00 00 00 00 00 00 00 00 00
  683. 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  684. 0030: 00 00 00 00 30 14 01 00 00 0f ac 04 01 00 00 0f
  685. 0040: ac 04 01 00 00 0f ac 02 00 00 00 00 00 00 00 00
  686. 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  687. 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  688. 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  689. 0080: 00 00 00 00
  690. [4294709526] mtlk0(mtlk_mbss_send_vap_activate:2473): CID-0000: UMI_ACTIVATE_VAP
  691. [4294709536] mtlk0(mtlk_mbss_send_vap_activate:2474): CID-0000: sBSSID = E8:DE:27:4E:05:5B
  692. [4294709536] mtlk0(mtlk_mbss_send_vap_activate:2475): CID-0000: sSSID = 5GHz
  693. [4294709546] mtlk0(mtlk_mbss_send_vap_activate:2476): CID-0000: Hidden = 0
  694. [4294709556] mtlk0(mtlk_dump:61): sRSNie =
  695. cp= 0x82bd9c74 l=80
  696. 0000: 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00
  697. 0010: 00 0f ac 02 00 00 00 00 00 00 00 00 00 00 00 00
  698. 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  699. 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  700. 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  701. [4294709586] mtlk0(mtlk_mbss_send_vap_activate:2480): CID-0000: mtlk_txmm_msg_send, MsgId = 0x453, ESSID = 5GHz
  702. [4294709596] mtlk0(mtlk_mbss_init:2750): CID-0000: mtlk_mbss_send_vap_activate returned successfully
  703. ioctl[SIOCSIFMTU]: Baddevice wlan0 entered promiscuous mode
  704. br0: port 5(wlan0) entering forwarding state
  705. address
  706. Setting MTU failed - trying to survive with current value
  707. l2_packet_receive - recvfrom: Network is down
  708. brctl: iface lq1: No such device
  709. device wlan0.0 entered promiscuous mode
  710. [ oal_startUPnP ] 350: TD-W8980B(DE), TD-W8980B\(DE\)
  711.  
  712. sendto: No such file or directory
  713. send 2004 error 253, -1
  714. [ apiSetAdslTypeAndAnnexType ] 1369: /firmware/dsl_cpe_pipe.sh g997xtusecs 10 00 10 00 00 04 01 00
  715. nReturn=0
  716.  
  717.  
  718. nReturn=0
  719.  
  720.  
  721. nReturn=0 nDirection=0
  722.  
  723.  
  724. nReturn=0 nDirection=1
  725.  
  726.  
  727. nReturn=4 nDirection=0
  728.  
  729.  
  730. nReturn=0 nDirection=1
  731.  
  732.  
  733. nReturn=0
  734.  
  735.  
  736. iptables: Bad rule (does a matching rule exist in that chain?).
  737. radvd starting
  738. [ oal_dsl_createMainAtmIf ] 2254: br2684ctl -b -p 1 -c 0 -e 0 -q ubr,aal5:max_pcr=0,min_pcr=0 -a 0.8.35
  739. [ oal_dsl_createMainAtmIf ] 2298: ifconfig nas0 hw ether 68:DE:27:4E:05:5A
  740. Interface "nas0" created sucessfully
  741. [ oal_dsl_addAtmIf ] 2083: br2684ctl -b -p 1 -x 1 -c 0 -e 0 -q ubr,aal5:max_pcr=0,min_pcr=0 -a 0.8.35
  742. optarg : ubr,aal5:max_pcr=0,min_pcr=0Interface "nas0_1" created sucessfully
  743. [ oal_dsl_wanVlan ] 1930: br2684ctl -v -g 1
  744. [ oal_dsl_wanVlan ] 1952: br2684ctl -v -i 0 -I nas0_1 -t 0
  745. device nas0_1 entered promiscuous mode
  746. br0: port 7(nas0_1) entering forwarding state
  747. iptables: Bad rule (does a matching rule exist in that chain?).
  748. iptables: Bad rule (does a matching rule exist in that chain?).
  749. [ getPidFromPidFile ] 112: Cann't open file: /var/run/zebra.pid.
  750. [ getPidFromPidFile ] 112: Cann't open file: /var/run/ripd.pid.
  751. DSL[00]: Error -1008 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D48), FctCode 0x7100!
  752. ifx_ppa_init - init succeeded
  753. iptables: Bad rule (does a matching rule exist in that chain?).
  754. ifx_ppa_init - init succeeded
  755. iptables: Bad rule (does a matching rule exist in that chain?).
  756. ifx_ppa_init - init succeeded
  757. iptables: Bad rule (does a matching rule exist in that chain?).
  758. DSL[00]: Ack mismatch in MsgID (0x2D08 vs 0x2D48 expected)!
  759. ip6tables: Bad rule (does a matching rule exist in that chain?).
  760. [ rsl_setStorageServiceObj ] 1140: mountFlag is 3,We start usb server
  761.  
  762. killall: ushare: no process killed
  763. uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server.
  764. Benjamin Zores (C) 2005-2007, for GeeXboX Team.
  765. See http://ushare.geexbox.org/ for updates.
  766. iptables: Bad rule (does a matching rule exist in that chain?).
  767. iptables: Bad rule (does a matching rule exist in that chain?).
  768. kcg 323 :GPL NetUSB up!
  769. kc 90 : run_telnetDBGDServer start
  770. kc 227 : init_DebugD end
  771. INFO1772: NetUSB 1.02.22, 00020620 : Oct 24 2012 16:17:57
  772. INFO1774: AUTH ISOC
  773. INFO1775: filterAudio
  774. usbcore: registered new interface driver KC NetUSB General Driver
  775. INFO0110: init proc : PAGE_SIZE 4096
  776. INFO17CE: Check mac address
  777. INFO1646: infomap c1774fd0
  778. INFO1649: sleep to wait br0 to wake up
  779. INFO02D0: use dev Name br0
  780. INFO1652: sleep to wait br0 end.
  781. INFO166B: UDP_BROAD 7437 tcpPort:625868800
  782. INFO02D0: use dev Name br0
  783. INFO1552: tcpConnector() started...
  784. Enable forwarding
  785. INFO142F: Bind to br0
  786. DSL[00]: Reboot on training timeout (120)!!!
  787. DSL[00]: Error -1008 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D48), FctCode 0x7100!
  788. DSL[00]: Ack mismatch in MsgID (0x2D08 vs 0x2D48 expected)!
  789. INFO02D0: use dev Name br0
  790. <3>NERR03CD: NU VM : ks_gethostbyname get ip failed
  791. INFO16E6: connect server failed
  792. DSL[00]: Reboot on training timeout (120)!!!
  793. DSL[00]: Error -1008 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D48), FctCode 0x7100!
  794. DSL[00]: Ack mismatch in MsgID (0x2D08 vs 0x2D48 expected)!
  795. DSL[00]: Reboot on training timeout (120)!!!
  796. DSL[00]: Error -1008 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D48), FctCode 0x7100!
  797. DSL[00]: Ack mismatch in MsgID (0x2D08 vs 0x2D48 expected)!
  798. DSL[00]: Reboot on training timeout (120)!!!
  799. DSL[00]: Error -1008 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D48), FctCode 0x7100!
  800. DSL[00]: Ack mismatch in MsgID (0x2D08 vs 0x2D48 expected)!
  801. DSL[00]: Reboot on training timeout (120)!!!
  802. DSL[00]: Error -1008 during FIO_MEI_MBOX_MSG_SEND (MsgID=0x2D48), FctCode 0x7100!
  803. DSL[00]: Ack mismatch in MsgID (0x2D08 vs 0x2D48 expected)!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!