Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [luke@Tyionous ~]$ dmesg
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.33.3-85.fc13.x86_64 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 6 18:09:49 UTC 2010
- Command line: ro root=UUID=6f8747ee-c6f5-410c-98d6-03a3f3f2cd8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
- BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bbd8d000 (usable)
- BIOS-e820: 00000000bbd8d000 - 00000000bbdd9000 (ACPI NVS)
- BIOS-e820: 00000000bbdd9000 - 00000000bbde3000 (ACPI data)
- BIOS-e820: 00000000bbde3000 - 00000000bbde6000 (ACPI NVS)
- BIOS-e820: 00000000bbde6000 - 00000000bbde7000 (reserved)
- BIOS-e820: 00000000bbde7000 - 00000000bbdf8000 (ACPI NVS)
- BIOS-e820: 00000000bbdf8000 - 00000000bbe1f000 (reserved)
- BIOS-e820: 00000000bbe1f000 - 00000000bbe26000 (ACPI NVS)
- BIOS-e820: 00000000bbe26000 - 00000000bbe29000 (reserved)
- BIOS-e820: 00000000bbe29000 - 00000000bbe2e000 (ACPI NVS)
- BIOS-e820: 00000000bbe2e000 - 00000000bbe4e000 (reserved)
- BIOS-e820: 00000000bbe4e000 - 00000000bbe91000 (ACPI NVS)
- BIOS-e820: 00000000bbe91000 - 00000000bc000000 (usable)
- BIOS-e820: 00000000bc000000 - 00000000bf800000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
- NX (Execute Disable) protection: active
- DMI 2.6 present.
- No AGP bridge found
- last_pfn = 0x140000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-CFFFF write-protect
- D0000-E7FFF uncachable
- E8000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask F00000000 write-back
- 1 base 100000000 mask FC0000000 write-back
- 2 base 0C0000000 mask FC0000000 uncachable
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- original variable MTRRs
- reg 0, base: 0GB, range: 4GB, type WB
- reg 1, base: 4GB, range: 1GB, type WB
- reg 2, base: 3GB, range: 1GB, type UC
- total RAM covered: 4096M
- Found optimal setting for mtrr clean up
- gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
- New variable MTRRs
- reg 0, base: 0GB, range: 2GB, type WB
- reg 1, base: 2GB, range: 1GB, type WB
- reg 2, base: 4GB, range: 1GB, type WB
- e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
- last_pfn = 0xbc000 max_arch_pfn = 0x400000000
- initial memory mapped : 0 - 20000000
- found SMP MP-table at [ffff8800000fce10] fce10
- init_memory_mapping: 0000000000000000-00000000bc000000
- 0000000000 - 00bc000000 page 2M
- kernel direct mapping tables up to bc000000 @ 8000-c000
- init_memory_mapping: 0000000100000000-0000000140000000
- 0100000000 - 0140000000 page 2M
- kernel direct mapping tables up to 140000000 @ a000-10000
- RAMDISK: 3743c000 - 37fef874
- ACPI: RSDP 00000000000f0410 00024 (v03 DELL )
- ACPI: XSDT 00000000bbdd9088 00064 (v01 DELL WN09 01072009 AMI 00010013)
- ACPI: FACP 00000000bbde24f8 000F4 (v04 DELL WN09 01072009 AMI 00010013)
- ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20091214/tbfadt-369)
- ACPI Warning: 32/64X FACS address mismatch in FADT - BBE29F40/00000000BBE29F80, using 32 (20091214/tbfadt-486)
- ACPI: DSDT 00000000bbdd9180 09378 (v02 DELL WN09 00000070 INTL 20051117)
- ACPI: FACS 00000000bbe29f40 00040
- ACPI: APIC 00000000bbde25f0 00092 (v01 DELL WN09 01072009 AMI 00010013)
- ACPI: SSDT 00000000bbde2688 0026E (v01 AMICPU PROC 00000001 MSFT 03000001)
- ACPI: MCFG 00000000bbde28f8 0003C (v01 DELL WN09 01072009 MSFT 00000097)
- ACPI: SLIC 00000000bbde2938 00176 (v01 DELL WN09 01072009 AMI 00010013)
- ACPI: HPET 00000000bbde2ab0 00038 (v01 DELL WN09 01072009 AMI. 00000003)
- ACPI: OSFR 00000000bbde2ae8 00086 (v01 DELL M08 07DA041A ASL 00000061)
- ACPI: SSDT 00000000bbde2b70 001BB (v01 Nv2Ref Nv2Tabl 00001000 INTL 20051117)
- ACPI: Local APIC address 0xfee00000
- No NUMA configuration found
- Faking a node at 0000000000000000-0000000140000000
- Bootmem setup node 0 0000000000000000-0000000140000000
- NODE_DATA [000000000000b000 - 0000000000020fff]
- bootmap [0000000000021000 - 0000000000048fff] pages 28
- (13 early reservations) ==> bootmem [0000000000 - 0140000000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0001000000 - 0001db92c8] TEXT DATA BSS ==> [0001000000 - 0001db92c8]
- #2 [003743c000 - 0037fef874] RAMDISK ==> [003743c000 - 0037fef874]
- #3 [0001dba000 - 0001dba373] BRK ==> [0001dba000 - 0001dba373]
- #4 [00000fce20 - 0000100000] BIOS reserved ==> [00000fce20 - 0000100000]
- #5 [00000fce10 - 00000fce20] MP-table mpf ==> [00000fce10 - 00000fce20]
- #6 [000009d400 - 00000fca10] BIOS reserved ==> [000009d400 - 00000fca10]
- #7 [00000fcd8c - 00000fce10] BIOS reserved ==> [00000fcd8c - 00000fce10]
- #8 [00000fca10 - 00000fcd8c] MP-table mpc ==> [00000fca10 - 00000fcd8c]
- #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
- #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
- #11 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
- #12 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
- [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00140000
- Movable zone start PFN for each node
- early_node_map[4] active PFN ranges
- 0: 0x00000000 -> 0x0000009d
- 0: 0x00000100 -> 0x000bbd8d
- 0: 0x000bbe91 -> 0x000bc000
- 0: 0x00100000 -> 0x00140000
- On node 0 totalpages: 1031833
- DMA zone: 56 pages used for memmap
- DMA zone: 108 pages reserved
- DMA zone: 3833 pages, LIFO batch:0
- DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 751412 pages, LIFO batch:31
- Normal zone: 3584 pages used for memmap
- Normal zone: 258560 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x408
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a701 base: 0xfed00000
- SMP: Allowing 8 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- PM: Registered nosave memory: 00000000bbd8d000 - 00000000bbdd9000
- PM: Registered nosave memory: 00000000bbdd9000 - 00000000bbde3000
- PM: Registered nosave memory: 00000000bbde3000 - 00000000bbde6000
- PM: Registered nosave memory: 00000000bbde6000 - 00000000bbde7000
- PM: Registered nosave memory: 00000000bbde7000 - 00000000bbdf8000
- PM: Registered nosave memory: 00000000bbdf8000 - 00000000bbe1f000
- PM: Registered nosave memory: 00000000bbe1f000 - 00000000bbe26000
- PM: Registered nosave memory: 00000000bbe26000 - 00000000bbe29000
- PM: Registered nosave memory: 00000000bbe29000 - 00000000bbe2e000
- PM: Registered nosave memory: 00000000bbe2e000 - 00000000bbe4e000
- PM: Registered nosave memory: 00000000bbe4e000 - 00000000bbe91000
- PM: Registered nosave memory: 00000000bc000000 - 00000000bf800000
- PM: Registered nosave memory: 00000000bf800000 - 00000000e0000000
- PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
- PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
- PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
- PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
- Allocating PCI resources starting at bf800000 (gap: bf800000:20800000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 30 pages/cpu @ffff880005800000 s90520 r8192 d24168 u262144
- pcpu-alloc: s90520 r8192 d24168 u262144 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013805
- Policy zone: Normal
- Kernel command line: ro root=UUID=6f8747ee-c6f5-410c-98d6-03a3f3f2cd8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Checking aperture...
- No AGP bridge found
- Calgary: detecting Calgary via BIOS EBDA area
- Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- Memory: 3976540k/5242880k available (4295k kernel code, 1115548k absent, 150792k reserved, 7535k data, 756k init)
- SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- Hierarchical RCU implementation.
- NR_IRQS:4352 nr_irqs:472
- Extended CMOS year: 2000
- Console: colour VGA+ 80x25
- console [tty0] enabled
- allocated 41943040 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 1595.821 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.64 BogoMIPS (lpj=1595821)
- Security Framework initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Mount-cache hash table entries: 256
- Initializing cgroup subsys debug
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 9 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
- using mwait in idle threads.
- Performance Events: Nehalem/Corei7 events, Intel PMU driver.
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- ACPI: Core revision 20091214
- Setting APIC routing to flat
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
- APIC calibration not consistent with PM-Timer: 121ms instead of 100ms
- APIC delta adjusted to PM-Timer: 831243 (1014108)
- Booting Node 0, Processors #1
- CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
- #2
- CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
- #3
- CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
- #4
- CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
- #5
- CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
- #6
- CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
- #7 Ok.
- CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
- Brought up 8 CPUs
- Total of 8 processors activated (25531.81 BogoMIPS).
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=584 bytes
- sizeof(dentry)=192 bytes
- sizeof(ext3inode)=792 bytes
- sizeof(buffer_head)=104 bytes
- sizeof(skbuff)=232 bytes
- sizeof(task_struct)=5968 bytes
- devtmpfs: initialized
- regulator: core version 0.5
- Time: 22:40:29 Date: 10/24/10
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: BIOS _OSI(Linux) query ignored
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: BIOS _OSI(Linux) query ignored
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
- pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
- pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:03.0: PME# disabled
- pci 0000:00:16.0: reg 10: [mem 0xfbf09000-0xfbf0900f 64bit]
- pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:16.0: PME# disabled
- pci 0000:00:1a.0: reg 10: [mem 0xfbf08000-0xfbf083ff]
- pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.0: PME# disabled
- pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PME# disabled
- pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: PME# disabled
- pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.3: PME# disabled
- pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.4: PME# disabled
- pci 0000:00:1d.0: reg 10: [mem 0xfbf07000-0xfbf073ff]
- pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.0: PME# disabled
- pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
- pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
- pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
- pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
- pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
- pci 0000:00:1f.2: reg 24: [mem 0xfbf06000-0xfbf067ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: reg 10: [mem 0xfbf05000-0xfbf050ff 64bit]
- pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
- pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
- pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
- pci 0000:02:00.0: reg 24: [io 0xe000-0xe07f]
- pci 0000:02:00.0: reg 30: [mem 0xfb000000-0xfb07ffff pref]
- pci 0000:02:00.1: reg 10: [mem 0xfb080000-0xfb083fff]
- pci 0000:00:03.0: PCI bridge to [bus 02-02]
- pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
- pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 11-11]
- pci 0000:12:00.0: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit]
- pci 0000:12:00.0: supports D1 D2
- pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:12:00.0: PME# disabled
- pci 0000:00:1c.1: PCI bridge to [bus 12-12]
- pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
- pci 0000:13:00.0: reg 10: [io 0xd000-0xd0ff]
- pci 0000:13:00.0: reg 18: [mem 0xd2c04000-0xd2c04fff 64bit pref]
- pci 0000:13:00.0: reg 20: [mem 0xd2c00000-0xd2c03fff 64bit pref]
- pci 0000:13:00.0: reg 30: [mem 0xfbd00000-0xfbd1ffff pref]
- pci 0000:13:00.0: supports D1 D2
- pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:13:00.0: PME# disabled
- pci 0000:00:1c.2: PCI bridge to [bus 13-13]
- pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
- pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff 64bit pref]
- pci 0000:14:00.0: reg 10: [mem 0xfbc03000-0xfbc030ff]
- pci 0000:14:00.0: supports D1 D2
- pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot
- pci 0000:14:00.0: PME# disabled
- pci 0000:14:00.1: reg 10: [mem 0xfbc02000-0xfbc020ff]
- pci 0000:14:00.1: supports D1 D2
- pci 0000:14:00.1: PME# supported from D0 D1 D2 D3hot
- pci 0000:14:00.1: PME# disabled
- pci 0000:14:00.2: reg 10: [mem 0xfbc01000-0xfbc010ff]
- pci 0000:14:00.2: supports D1 D2
- pci 0000:14:00.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:14:00.2: PME# disabled
- pci 0000:14:00.3: reg 10: [mem 0xfbc00000-0xfbc007ff]
- pci 0000:14:00.3: supports D1 D2
- pci 0000:14:00.3: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:14:00.3: PME# disabled
- pci 0000:00:1c.3: PCI bridge to [bus 14-14]
- pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
- pci 0000:00:1c.4: PCI bridge to [bus 15-15]
- pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfbbfffff]
- pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode)
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- alloc irq_desc for 24 on node 0
- alloc kstat_irqs on node 0
- alloc irq_desc for 25 on node 0
- alloc kstat_irqs on node 0
- alloc irq_desc for 26 on node 0
- alloc kstat_irqs on node 0
- alloc irq_desc for 27 on node 0
- alloc kstat_irqs on node 0
- alloc irq_desc for 28 on node 0
- alloc kstat_irqs on node 0
- HPET: 8 timers in total, 5 timers will be used for per-cpu timer
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
- hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- hpet: hpet2 irq 24 for MSI
- hpet: hpet3 irq 25 for MSI
- hpet: hpet4 irq 26 for MSI
- hpet: hpet5 irq 27 for MSI
- hpet: hpet6 irq 28 for MSI
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- alloc irq_desc for 20 on node 0
- alloc kstat_irqs on node 0
- pnp: PnP ACPI: found 12 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
- system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
- system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
- system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
- system 00:06: [io 0x04d0-0x04d1] has been reserved
- system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved
- system 00:09: [io 0x0400-0x047f] has been reserved
- system 00:09: [io 0x1180-0x119f] has been reserved
- system 00:09: [io 0x0500-0x057f] has been reserved
- system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
- system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
- system 00:09: [mem 0xff000000-0xffffffff] has been reserved
- pci 0000:00:1c.0: BAR 14: assigned [mem 0xbf800000-0xbf9fffff]
- pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfa00000-0xbfbfffff 64bit pref]
- pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfc00000-0xbfdfffff 64bit pref]
- pci 0000:00:1c.3: BAR 15: assigned [mem 0xbfe00000-0xbfffffff 64bit pref]
- pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
- pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
- pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
- pci 0000:00:03.0: PCI bridge to [bus 02-02]
- pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
- pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 11-11]
- pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.0: bridge window [mem 0xbf800000-0xbf9fffff]
- pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff 64bit pref]
- pci 0000:00:1c.1: PCI bridge to [bus 12-12]
- pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
- pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
- pci 0000:00:1c.1: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]
- pci 0000:00:1c.2: PCI bridge to [bus 13-13]
- pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
- pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff 64bit pref]
- pci 0000:00:1c.3: PCI bridge to [bus 14-14]
- pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
- pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
- pci 0000:00:1c.3: bridge window [mem 0xbfe00000-0xbfffffff 64bit pref]
- pci 0000:00:1c.4: PCI bridge to [bus 15-15]
- pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfbbfffff]
- pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 20-20]
- pci 0000:00:1e.0: bridge window [io disabled]
- pci 0000:00:1e.0: bridge window [mem disabled]
- pci 0000:00:1e.0: bridge window [mem pref disabled]
- alloc irq_desc for 16 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:03.0: setting latency timer to 64
- alloc irq_desc for 17 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 18 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:1c.2: setting latency timer to 64
- alloc irq_desc for 19 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:1c.3: setting latency timer to 64
- pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.4: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
- pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
- pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
- pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
- pci_bus 0000:11: resource 1 [mem 0xbf800000-0xbf9fffff]
- pci_bus 0000:11: resource 2 [mem 0xbfa00000-0xbfbfffff 64bit pref]
- pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
- pci_bus 0000:12: resource 1 [mem 0xfbe00000-0xfbefffff]
- pci_bus 0000:12: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref]
- pci_bus 0000:13: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:13: resource 1 [mem 0xfbd00000-0xfbdfffff]
- pci_bus 0000:13: resource 2 [mem 0xd2c00000-0xd2cfffff 64bit pref]
- pci_bus 0000:14: resource 0 [io 0x4000-0x4fff]
- pci_bus 0000:14: resource 1 [mem 0xfbc00000-0xfbcfffff]
- pci_bus 0000:14: resource 2 [mem 0xbfe00000-0xbfffffff 64bit pref]
- pci_bus 0000:15: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:15: resource 1 [mem 0xfb200000-0xfbbfffff]
- pci_bus 0000:15: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
- pci_bus 0000:20: resource 3 [io 0x0000-0xffff]
- pci_bus 0000:20: resource 4 [mem 0x00000000-0xffffffffffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 524288 bind 65536)
- TCP reno registered
- UDP hash table entries: 2048 (order: 4, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- NET: Registered protocol family 1
- pci 0000:02:00.0: Boot video device
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 11982k freed
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing 64MB software IO TLB between ffff8800059de000 - ffff8800099de000
- software IO TLB at phys 0x59de000 - 0x99de000
- Intel PCLMULQDQ-NI instructions are not detected.
- audit: initializing netlink socket (disabled)
- type=2000 audit(1287960030.018:1): initialized
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 7790
- SELinux: Registering netfilter hooks
- alg: No test for stdrng (krng)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:03.0: setting latency timer to 64
- alloc irq_desc for 29 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
- pcieport 0000:00:1c.0: setting latency timer to 64
- alloc irq_desc for 30 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
- pcieport 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 31 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X
- pcieport 0000:00:1c.2: setting latency timer to 64
- alloc irq_desc for 32 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.2: irq 32 for MSI/MSI-X
- pcieport 0000:00:1c.3: setting latency timer to 64
- alloc irq_desc for 33 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.3: irq 33 for MSI/MSI-X
- pcieport 0000:00:1c.4: setting latency timer to 64
- alloc irq_desc for 34 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.4: irq 34 for MSI/MSI-X
- aer 0000:00:03.0:pcie02: service driver aer loaded
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: Using ACPI for slot detection.
- pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 442
- pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- acpiphp_glue: Slot 1 already registered by another hotplug driver
- pci-stub: invalid id string ""
- ACPI: AC Adapter [AC] (on-line)
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- ACPI: Power Button [PWRB]
- input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- ACPI: Lid Switch [LID0]
- input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- ACPI: Sleep Button [SBTN]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- ACPI: Power Button [PWRF]
- ACPI: SSDT 00000000bbe25898 00724 (v01 AMI IST 00000001 MSFT 03000001)
- Monitor-Mwait will be used to enter C-2 state
- Monitor-Mwait will be used to enter C-3 state
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [THM] (67 C)
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- brd: module loaded
- loop: module loaded
- input: Macintosh mouse button emulation as /devices/virtual/input/input4
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- alloc irq_desc for 35 on node -1
- alloc kstat_irqs on node -1
- ahci 0000:00:1f.2: irq 35 for MSI/MSI-X
- ACPI: Battery Slot [BAT0] (battery present)
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 35
- ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 35
- ata3: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06200 irq 35
- ata4: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06280 irq 35
- ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 35
- ata6: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06380 irq 35
- Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ehci_hcd 0000:00:1a.0: setting latency timer to 64
- ehci_hcd 0000:00:1a.0: EHCI Host Controller
- ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.0: debug port 2
- ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf08000
- ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd
- usb usb1: SerialNumber: 0000:00:1a.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- alloc irq_desc for 23 on node -1
- alloc kstat_irqs on node -1
- ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.0: setting latency timer to 64
- ehci_hcd 0000:00:1d.0: EHCI Host Controller
- ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.0: debug port 2
- ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf07000
- ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos 00:03: RTC can wake from S4
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- cpuidle: using governor ladder
- cpuidle: using governor menu
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- ip_tables: (C) 2000-2006 Netfilter Core Team
- TCP cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- PM: Resume from disk failed.
- registered taskstats version 1
- No TPM chip found, activating TPM-bypass!
- Magic number: 14:296:705
- rtc_cmos 00:03: setting system clock to 2010-10-24 22:40:30 UTC (1287960030)
- Initalizing network drop monitor service
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- ata3: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata6: SATA link down (SStatus 0 SControl 300)
- ata5: SATA link down (SStatus 0 SControl 300)
- ata2.00: ATAPI: HL-DT-STDVD+/-RW GT32N, A101, max UDMA/100, ATAPI AN
- ata2.00: configured for UDMA/100
- usb 1-1: new high speed USB device using ehci_hcd and address 2
- ata1.00: ATA-8: ST9500420AS, D004SDM1, max UDMA/133
- ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA ST9500420AS D004 PQ: 0 ANSI: 5
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda:
- scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT32N A101 PQ: 0 ANSI: 5
- sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- sr 1:0:0:0: Attached scsi generic sg1 type 5
- sda5 sda6 sda7
- usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 6 ports detected
- sda8 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- Freeing unused kernel memory: 756k freed
- Write protecting the kernel read-only data: 10240k
- Freeing unused kernel memory: 1828k freed
- Freeing unused kernel memory: 1960k freed
- dracut: dracut-005-3.fc13
- dracut: rd_NO_LUKS: removing cryptoluks activation
- dracut: rd_NO_LVM: removing LVM activation
- udev: starting version 151
- ACPI Warning: _BQC returned an invalid level (20091214/video-634)
- acpi device:04: registered as cooling_device8
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6
- ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
- [drm] Initialized drm 1.1.0 20060810
- usb 2-1: new high speed USB device using ehci_hcd and address 2
- nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- nouveau 0000:02:00.0: setting latency timer to 64
- [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0a5480a2)
- [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
- usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 2-1:1.0: USB hub found
- hub 2-1:1.0: 8 ports detected
- [drm] nouveau 0000:02:00.0: ... appears to be valid
- [drm] nouveau 0000:02:00.0: BIT BIOS found
- [drm] nouveau 0000:02:00.0: Bios version 70.16.5a.01
- [drm] nouveau 0000:02:00.0: Pointer to BIT loadval table invalid
- [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
- [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
- [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000323 00010034
- [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02011300 00000000
- [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02022362 00020010
- [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 0000000e 00000000
- [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
- [drm] nouveau 0000:02:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
- [drm] nouveau 0000:02:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
- [drm] nouveau 0000:02:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
- [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0x6B9B
- usb 1-1.3: new full speed USB device using ehci_hcd and address 3
- [drm] nouveau 0000:02:00.0: 0x6E55: Condition still not met after 20ms, skipping following opcodes
- [drm] nouveau 0000:02:00.0: 0x6E59: Condition still not met after 20ms, skipping following opcodes
- usb 1-1.3: New USB device found, idVendor=138a, idProduct=0008
- usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- usb 1-1.3: SerialNumber: 3b21a8948284
- [drm] nouveau 0000:02:00.0: 0x7006: Condition still not met after 20ms, skipping following opcodes
- [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0x7033
- [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0x7F33
- [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0x7F55
- [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0x80B7
- [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0x811C
- [drm] nouveau 0000:02:00.0: 0x6A1B: Condition still not met after 20ms, skipping following opcodes
- [drm] nouveau 0000:02:00.0: 0x54D0: parsing output script 0
- [drm] nouveau 0000:02:00.0: Couldn't find matching output script table
- [drm] nouveau 0000:02:00.0: 0x58C8: parsing output script 0
- [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM
- usb 2-1.7: new high speed USB device using ehci_hcd and address 3
- Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
- input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
- usb 2-1.7: New USB device found, idVendor=0c45, idProduct=6450
- usb 2-1.7: New USB device strings: Mfr=2, Product=1, SerialNumber=0
- usb 2-1.7: Product: Laptop_Integrated_Webcam_2M
- usb 2-1.7: Manufacturer: Sonix Technology Co., Ltd.
- [TTM] Zone kernel: Available graphics memory: 1996534 kiB.
- [ttm] Initializing pool allocator.
- [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
- [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
- [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
- [drm] nouveau 0000:02:00.0: Detected a LVDS output
- [drm] nouveau 0000:02:00.0: Detected a DAC output
- [drm] nouveau 0000:02:00.0: Detected a TMDS output
- [drm] nouveau 0000:02:00.0: Detected a LVDS connector
- [drm] nouveau 0000:02:00.0: Detected a VGA connector
- [drm] nouveau 0000:02:00.0: Detected a HDMI connector
- [drm] nouveau 0000:02:00.0: allocated 1600x900 fb: 0x40250000, bo ffff8801374c2800
- fbcon: nouveaufb (fb0) is primary device
- [drm] nouveau 0000:02:00.0: 0x54E1: parsing output script 1
- [drm] nouveau 0000:02:00.0: 0x536B: parsing clock script 0
- Console: switching to colour frame buffer device 200x56
- fb0: nouveaufb frame buffer device
- registered panic notifier
- [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
- dracut: Starting plymouth daemon
- dracut: rd_NO_DM: removing DM RAID activation
- dracut: rd_NO_MD: removing MD RAID activation
- [drm] nouveau 0000:02:00.0: 0x54CB: parsing clock script 1
- firewire_ohci 0000:14:00.3: PCI INT D -> GSI 18 (level, low) -> IRQ 18
- firewire_ohci 0000:14:00.3: setting latency timer to 64
- firewire_ohci: Added fw-ohci device 0000:14:00.3, OHCI version 1.10
- firewire_core: created device fw0: GUID 358f5ec04a4fc000, S400
- EXT4-fs (sda8): mounted filesystem with ordered data mode
- dracut: Mounted root filesystem /dev/sda8
- dracut: Loading SELinux policy
- type=1404 audit(1287960034.437:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- SELinux: 8192 avtab hash slots, 196425 rules.
- SELinux: 8192 avtab hash slots, 196425 rules.
- SELinux: 9 users, 13 roles, 3233 types, 157 bools, 1 sens, 1024 cats
- SELinux: 77 classes, 196425 rules
- SELinux: Completing initialization.
- SELinux: Setting up existing superblocks.
- SELinux: initialized (dev sda8, type ext4), uses xattr
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
- SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
- SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
- SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
- SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
- SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
- SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev proc, type proc), uses genfs_contexts
- SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
- SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- type=1403 audit(1287960034.832:3): policy loaded auid=4294967295 ses=4294967295
- dracut: Switching root
- readahead-collector: starting
- udev: starting version 151
- microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
- microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
- microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
- i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- ACPI: I/O resource 0000:00:1f.3 [0xf000-0xf01f] conflicts with ACPI region SMBI [0xf000-0xf00f]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
- iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- ACPI: WMI: Mapper loaded
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- r8169 0000:13:00.0: setting latency timer to 64
- alloc irq_desc for 36 on node -1
- alloc kstat_irqs on node -1
- r8169 0000:13:00.0: irq 36 for MSI/MSI-X
- eth0: RTL8168d/8111d at 0xffffc90014cea000, a4:ba:db:cc:26:24, XID 083000c0 IRQ 36
- Linux video capture interface: v2.00
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6450)
- sdhci-pci 0000:14:00.0: SDHCI controller found [1180:e822] (rev 1)
- sdhci-pci 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- sdhci-pci 0000:14:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
- sdhci-pci 0000:14:00.0: setting latency timer to 64
- Registered led device: mmc0::
- mmc0: SDHCI controller on PCI [0000:14:00.0] using DMA
- input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input8
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (v0.1.0)
- input: Dell WMI hotkeys as /devices/virtual/input/input9
- alloc irq_desc for 22 on node -1
- alloc kstat_irqs on node -1
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- alloc irq_desc for 37 on node -1
- alloc kstat_irqs on node -1
- HDA Intel 0000:00:1b.0: irq 37 for MSI/MSI-X
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
- ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
- ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0
- ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x11, fmic=0xa, line=0x0, fline=0x0, cd=0x0, aux=0x0
- ALSA sound/pci/hda/patch_sigmatel.c:2996: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
- input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- HDA Intel 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- hda_intel: Disable MSI for Nvidia chipset
- HDA Intel 0000:02:00.1: setting latency timer to 64
- ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
- ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
- ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
- ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
- ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
- ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
- ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
- ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
- ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
- ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
- ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
- ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
- name_count maxed, losing inode data: dev=00:05, inode=10984
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- name_count maxed, losing inode data: dev=00:05, inode=10679
- EXT4-fs (sda5): mounted filesystem with ordered data mode
- SELinux: initialized (dev sda5, type ext4), uses xattr
- EXT4-fs (sda6): mounted filesystem with ordered data mode
- SELinux: initialized (dev sda6, type ext4), uses xattr
- Adding 5711864k swap on /dev/sda7. Priority:-1 extents:1 across:5711864k
- SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
- readahead-disable-service: delaying service auditd
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- r8169: eth0: link down
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
- [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
- [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
- [drm] nouveau 0000:02:00.0: nouveau_channel_free: freeing fifo 2
- [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
- [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
- type=1305 audit(1287985342.865:49278): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
- readahead-collector: starting delayed service auditd
- readahead-collector: sorting
- fuse init (API version 7.13)
- SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- readahead-collector: finished
- r8169: eth0: link up
- ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement