Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- pi@raspberrypi:~$ sudo wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d
- wpa_supplicant v2.4
- random: Trying to read entropy from /dev/random
- Successfully initialized wpa_supplicant
- Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
- Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
- Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
- ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev'
- update_config=1
- country='NL'
- Priority group 0
- id=0 ssid='Broek_uit!'
- rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
- rfkill: initial event: idx=1 type=2 op=0 soft=0 hard=0
- nl80211: TDLS supported
- nl80211: Supported cipher 00-0f-ac:1
- nl80211: Supported cipher 00-0f-ac:5
- nl80211: Supported cipher 00-0f-ac:2
- nl80211: Supported cipher 00-0f-ac:4
- nl80211: Using driver-based off-channel TX
- nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
- nl80211: Use separate P2P group interface (driver advertised support)
- nl80211: use P2P_DEVICE support
- nl80211: interface wlan0 in phy phy0
- nl80211: Set mode ifindex 3 iftype 2 (STATION)
- nl80211: Subscribe to mgmt frames with non-AP handle 0x9b88a0
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040a
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040b
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040c
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040d
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090a
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090b
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090c
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090d
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0409506f9a09
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=7f506f9a09
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0801
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 08 01
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040e
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0e
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=06
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=1): 06
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0a07
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 07
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0a11
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 11
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=1101
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 11 01
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=1102
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 11 02
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0505
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 05 05
- nl80211: Failed to register Action frame processing - ignore for now
- netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
- nl80211: driver param='(null)'
- Add interface wlan0 to a new radio phy0
- nl80211: Regulatory information - country=NL (DFS-ETSI)
- nl80211: 2402-2482 @ 40 MHz 20 mBm
- nl80211: 5170-5250 @ 80 MHz 20 mBm (no outdoor)
- nl80211: 5250-5330 @ 80 MHz 20 mBm (no outdoor) (DFS)
- nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS)
- nl80211: 5725-5875 @ 80 MHz 13 mBm
- nl80211: 57000-66000 @ 2160 MHz 40 mBm
- nl80211: Added 802.11b mode based on 802.11g information
- wlan0: Own MAC address: 0e:5b:b8:38:7d:ac
- wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
- wlan0: RSN: flushing PMKID list in the driver
- nl80211: Flush PMKIDs
- TDLS: TDLS operation supported by driver
- TDLS: Driver uses internal link setup
- TDLS: Driver does not support TDLS channel switching
- wlan0: WPS: UUID based on MAC address: 2364b09c-c449-59a1-b205-8557b567db59
- ENGINE: Loading dynamic engine
- ENGINE: Loading dynamic engine
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: Supplicant port status: Unauthorized
- nl80211: Skip set_supp_port(unauthorized) while not associated
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- Using existing control interface directory.
- ctrl_interface_group=108 (from group name 'netdev')
- ctrl_iface bind(PF_UNIX) failed: Address already in use
- ctrl_iface exists and seems to be in use - cannot override it
- Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
- Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'.
- You may have another wpa_supplicant process already running or the file was
- left by an unclean termination of wpa_supplicant in which case you will need
- to manually remove this file before starting wpa_supplicant again.
- Failed to add interface wlan0
- wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=DISCONNECTED
- TDLS: Tear down peers
- wlan0: State: DISCONNECTED -> DISCONNECTED
- nl80211: Set wlan0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- wlan0: WPA: Clear old PMK and PTK
- wlan0: Cancelling delayed sched scan
- wlan0: Cancelling scan request
- wlan0: Cancelling authentication timeout
- Remove interface wlan0 from radio phy0
- Remove radio phy0
- nl80211: deinit ifname=wlan0 disabled_11b_rates=0
- nl80211: Remove monitor interface: refcount=0
- netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
- nl80211: Set mode ifindex 3 iftype 2 (STATION)
- nl80211: Unsubscribe mgmt frames handle 0x88130029 (mode change)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement