Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- This is a pre-release version of the X server from The X.Org Foundation.
- It is not supported in any way.
- Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
- Select the "xorg" product for bugs you find in this release.
- Before reporting bugs in pre-release versions please check the
- latest version in the X.Org Foundation git repository.
- See http://wiki.x.org/wiki/GitPage for git access instructions.
- X.Org X Server 1.6.1.901 (1.6.2 RC 1)
- Release Date: 2009-5-8
- X Protocol Version 11, Revision 0
- Build Operating System: Linux 2.6.29-ARCH i686
- Current Operating System: Linux localhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
- Build Date: 28 May 2009 10:40:05PM
- Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 15 08:50:18 2009
- (II) Loader magic: 0x1a40
- (II) Module ABI versions:
- X.Org ANSI C Emulation: 0.4
- X.Org Video Driver: 5.0
- X.Org XInput driver : 4.0
- X.Org Server Extension : 2.0
- (II) Loader running on linux
- (++) using VT number 7
- (--) PCI:*(0@1:0:0) ATI Technologies Inc RV630 [Radeon HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfdde0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
- (==) Using default built-in configuration (30 lines)
- (==) --- Start of built-in configuration ---
- Section "Device"
- Identifier "Builtin Default ati Device 0"
- Driver "ati"
- EndSection
- Section "Screen"
- Identifier "Builtin Default ati Screen 0"
- Device "Builtin Default ati Device 0"
- EndSection
- Section "Device"
- Identifier "Builtin Default vesa Device 0"
- Driver "vesa"
- EndSection
- Section "Screen"
- Identifier "Builtin Default vesa Screen 0"
- Device "Builtin Default vesa Device 0"
- EndSection
- Section "Device"
- Identifier "Builtin Default fbdev Device 0"
- Driver "fbdev"
- EndSection
- Section "Screen"
- Identifier "Builtin Default fbdev Screen 0"
- Device "Builtin Default fbdev Device 0"
- EndSection
- Section "ServerLayout"
- Identifier "Builtin Default Layout"
- Screen "Builtin Default ati Screen 0"
- Screen "Builtin Default vesa Screen 0"
- Screen "Builtin Default fbdev Screen 0"
- EndSection
- (==) --- End of built-in configuration ---
- (==) ServerLayout "Builtin Default Layout"
- (**) |-->Screen "Builtin Default ati Screen 0" (0)
- (**) | |-->Monitor "<default monitor>"
- (**) | |-->Device "Builtin Default ati Device 0"
- (==) No monitor specified for screen "Builtin Default ati Screen 0".
- Using a default monitor configuration.
- (**) |-->Screen "Builtin Default vesa Screen 0" (1)
- (**) | |-->Monitor "<default monitor>"
- (**) | |-->Device "Builtin Default vesa Device 0"
- (==) No monitor specified for screen "Builtin Default vesa Screen 0".
- Using a default monitor configuration.
- (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
- (**) | |-->Monitor "<default monitor>"
- (**) | |-->Device "Builtin Default fbdev Device 0"
- (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
- Using a default monitor configuration.
- (==) Automatically adding devices
- (==) Automatically enabling devices
- (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
- Entry deleted from font path.
- (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
- (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
- Entry deleted from font path.
- (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
- (==) FontPath set to:
- /usr/share/fonts/misc,
- /usr/share/fonts/TTF,
- /usr/share/fonts/Type1,
- built-ins
- (==) ModulePath set to "/usr/lib/xorg/modules"
- (II) Cannot locate a core pointer device.
- (II) Cannot locate a core keyboard device.
- (II) The server relies on HAL to provide the list of input devices.
- If no devices become available, reconfigure HAL or disable AllowEmptyInput.
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- (II) System resource ranges:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (II) LoadModule: "extmod"
- (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
- (II) Module extmod: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension MIT-SCREEN-SAVER
- (II) Loading extension XFree86-VidModeExtension
- (II) Loading extension XFree86-DGA
- (II) Loading extension DPMS
- (II) Loading extension XVideo
- (II) Loading extension XVideo-MotionCompensation
- (II) Loading extension X-Resource
- (II) LoadModule: "dbe"
- (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
- (II) Module dbe: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension DOUBLE-BUFFER
- (II) LoadModule: "glx"
- (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
- (II) Module glx: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- ABI class: X.Org Server Extension, version 2.0
- (==) AIGLX enabled
- (II) Loading extension GLX
- (II) LoadModule: "record"
- (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
- (II) Module record: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.13.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension RECORD
- (II) LoadModule: "dri"
- (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
- (II) Module dri: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension XFree86-DRI
- (II) LoadModule: "dri2"
- (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
- (II) Module dri2: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension DRI2
- (II) LoadModule: "ati"
- (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
- (II) Module ati: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 6.12.99
- Module class: X.Org Video Driver
- ABI class: X.Org Video Driver, version 5.0
- (II) LoadModule: "radeon"
- (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
- (II) Module radeon: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 6.12.99
- Module class: X.Org Video Driver
- ABI class: X.Org Video Driver, version 5.0
- (II) LoadModule: "vesa"
- (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
- (II) Module vesa: vendor="X.Org Foundation"
- compiled for 1.6.0, module version = 2.2.0
- Module class: X.Org Video Driver
- ABI class: X.Org Video Driver, version 5.0
- (II) LoadModule: "fbdev"
- (WW) Warning, couldn't open module fbdev
- (II) UnloadModule: "fbdev"
- (EE) Failed to load module "fbdev" (module does not exist, 0)
- (II) RADEON: Driver for ATI Radeon chipsets:
- ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
- ATI Radeon Mobility X300 (M24) 3152 (PCIE),
- ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
- ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
- ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
- ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
- ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
- ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
- ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
- ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
- ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
- ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
- ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
- ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
- ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
- ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
- ATI Radeon X800PRO (R420) JI (AGP),
- ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
- ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
- ATI Radeon Mobility 9800 (M18) JN (AGP),
- ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
- ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
- ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
- ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
- ATI Radeon Mobility M7 LW (AGP),
- ATI Mobility FireGL 7800 M7 LX (AGP),
- ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
- ATI FireGL Mobility 9000 (M9) Ld (AGP),
- ATI Radeon Mobility 9000 (M9) Lf (AGP),
- ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
- ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
- ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
- ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
- ATI Radeon 9800XT NJ (AGP),
- ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
- ATI Radeon Mobility 9600 (M10) NQ (AGP),
- ATI Radeon Mobility 9600 (M11) NR (AGP),
- ATI Radeon Mobility 9600 (M10) NS (AGP),
- ATI FireGL Mobility T2 (M10) NT (AGP),
- ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
- ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
- ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
- ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
- ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
- ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
- ATI Radeon Mobility X300 (M22) 5460 (PCIE),
- ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
- ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
- ATI Radeon X800PRO (R423) UI (PCIE),
- ATI Radeon X800LE (R423) UJ (PCIE),
- ATI Radeon X800SE (R423) UK (PCIE),
- ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
- ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
- ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
- ATI FireGL unknown (R423) UR (PCIE),
- ATI FireGL unknown (R423) UT (PCIE),
- ATI Mobility FireGL V5000 (M26) (PCIE),
- ATI Mobility FireGL V5000 (M26) (PCIE),
- ATI Mobility Radeon X700 XL (M26) (PCIE),
- ATI Mobility Radeon X700 (M26) (PCIE),
- ATI Mobility Radeon X700 (M26) (PCIE),
- ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
- ATI Radeon Mobility 9100 IGP (U3) 5835,
- ATI Radeon XPRESS 200 5954 (PCIE),
- ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
- ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
- ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
- ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
- ATI Radeon XPRESS 200M 5975 (PCIE),
- ATI Radeon XPRESS 200 5A41 (PCIE),
- ATI Radeon XPRESS 200M 5A42 (PCIE),
- ATI Radeon XPRESS 200 5A61 (PCIE),
- ATI Radeon XPRESS 200M 5A62 (PCIE),
- ATI Radeon X300 (RV370) 5B60 (PCIE),
- ATI Radeon X600 (RV370) 5B62 (PCIE),
- ATI Radeon X550 (RV370) 5B63 (PCIE),
- ATI FireGL V3100 (RV370) 5B64 (PCIE),
- ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
- ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
- ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
- ATI Mobility Radeon X800 XT (M28) (PCIE),
- ATI Mobility FireGL V5100 (M28) (PCIE),
- ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
- ATI Radeon X850 XT PE (R480) (PCIE),
- ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
- ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
- ATI Radeon X850 XT (R480) (PCIE),
- ATI Radeon X800XT (R423) 5D57 (PCIE),
- ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
- ATI Radeon X700 PRO (RV410) (PCIE),
- ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
- ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
- ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
- ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
- ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
- ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
- ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
- ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
- ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
- ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
- ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
- ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
- ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
- ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
- ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
- ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
- ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
- ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
- ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
- ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
- ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
- ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
- ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
- ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
- ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
- ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
- ATI Mobility Radeon X1700, ATI Radeon X2300HD,
- ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
- ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
- ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
- ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
- ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
- ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
- ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
- ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
- ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
- ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
- ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
- ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
- ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
- ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
- ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
- ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
- ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
- ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
- ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
- ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
- AMD FireStream 9250, ATI FirePro V8700 (FireGL),
- ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
- ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
- ATI M98, ATI M98, ATI M98, ATI Radeon RV730 (AGP), ATI FirePro M5750,
- ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
- ATI RADEON E4600, ATI RV730 PRO [Radeon HD 4650],
- ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
- ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
- ATI Mobility Radeon HD 4850, ATI RV740, ATI Radeon HD 4770,
- ATI Radeon HD 4770, ATI RV610, ATI Radeon HD 2400 XT,
- ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
- ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
- ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
- ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
- ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
- ATI Mobility Radeon HD 3850 X2, ATI RV670,
- ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
- ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
- ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
- ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
- ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
- ATI Mobility Radeon 4500 Series, ATI RV630,
- ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
- ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
- ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
- ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
- ATI FireGL V3600, ATI Radeon HD 2600 LE,
- ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
- ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
- ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
- ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
- ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
- ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
- ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
- ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
- ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
- ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
- ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
- ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
- ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
- ATI Radeon HD Graphics, ATI Radeon Graphics,
- ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
- ATI Radeon Graphics
- (II) VESA: driver for VESA chipsets: vesa
- (II) Primary Device is: PCI 01@00:00:0
- (II) resource ranges after xf86ClaimFixedResources() call:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (WW) Falling back to old probe method for vesa
- (II) resource ranges after probing:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
- [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
- [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
- [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
- [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
- (II) Setting vga for screen 0.
- (II) RADEON(0): TOTO SAYS 00000000fdde0000
- (II) RADEON(0): MMIO registers at 0x00000000fdde0000: size 64KB
- (II) RADEON(0): PCI bus 1 card 0 func 0
- (II) RADEON(0): Creating default Display subsection in Screen section
- "Builtin Default ati Screen 0" for depth/fbbpp 24/32
- (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
- (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
- (==) RADEON(0): Default visual is TrueColor
- (II) Loading sub module "vgahw"
- (II) LoadModule: "vgahw"
- (II) Loading /usr/lib/xorg/modules//libvgahw.so
- (II) Module vgahw: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 0.1.0
- ABI class: X.Org Video Driver, version 5.0
- (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
- (==) RADEON(0): RGB weight 888
- (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
- (--) RADEON(0): Chipset: "ATI Radeon HD 2600 Pro" (ChipID = 0x9589)
- (--) RADEON(0): Linear framebuffer at 0x00000000d0000000
- (II) RADEON(0): PCIE card detected
- (II) Loading sub module "int10"
- (II) LoadModule: "int10"
- (II) Loading /usr/lib/xorg/modules//libint10.so
- (II) Module int10: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- ABI class: X.Org Video Driver, version 5.0
- (II) RADEON(0): initializing int10
- (II) RADEON(0): Primary V_BIOS segment is: 0xc000
- (II) RADEON(0): ATOM BIOS detected
- (II) RADEON(0): ATOM BIOS Rom:
- SubsystemVendorID: 0x0000 SubsystemID: 0x0000
- IOBaseAddress: 0xde00
- Filename: 26P7060H.25P
- BIOS Bootup Message:
- ATI RADEON HD2600 SERIES
- (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
- (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
- (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
- (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
- (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
- (II) RADEON(0): Default Engine Clock: 600000
- (II) RADEON(0): Default Memory Clock: 700000
- (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
- (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
- (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
- (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
- (II) RADEON(0): Maximum Pixel Clock: 400000
- (II) RADEON(0): Reference Clock: 27000
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
- (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
- (II) RADEON(0): Will try to use DMA for Xv image transfers
- (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
- (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
- (II) RADEON(0): Color tiling disabled
- (II) Loading sub module "ddc"
- (II) LoadModule: "ddc"
- (II) Module "ddc" already built-in
- (II) Loading sub module "i2c"
- (II) LoadModule: "i2c"
- (II) Module "i2c" already built-in
- (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 600.000000, mclk: 700.000000
- (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
- (II) RADEON(0): Output HDMI-0 has no monitor section
- (II) RADEON(0): I2C bus "HDMI-0" initialized.
- (II) RADEON(0): Output VGA-0 has no monitor section
- (II) RADEON(0): I2C bus "VGA-0" initialized.
- (II) RADEON(0): Output DVI-0 has no monitor section
- (II) RADEON(0): I2C bus "DVI-0" initialized.
- (II) RADEON(0): Port0:
- XRANDR name: HDMI-0
- Connector: HDMI-B
- DFP1: INTERNAL_KLDSCP_TMDS1
- DDC reg: 0x7e60
- (II) RADEON(0): Port1:
- XRANDR name: VGA-0
- Connector: VGA
- CRT2: INTERNAL_KLDSCP_DAC2
- DDC reg: 0x7e50
- (II) RADEON(0): Port2:
- XRANDR name: DVI-0
- Connector: DVI-I
- CRT1: INTERNAL_KLDSCP_DAC1
- DFP2: INTERNAL_LVTM1
- DDC reg: 0x7e40
- (II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at address 0x60.
- (II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- finished output detect: 0
- (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
- (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- finished output detect: 1
- (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
- (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- finished output detect: 2
- finished all detect
- before xf86InitialConfiguration
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- (II) RADEON(0): Total number of valid Screen mode(s) added: 0
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- (II) RADEON(0): Output HDMI-0 disconnected
- (II) RADEON(0): Output VGA-0 connected
- (II) RADEON(0): Output DVI-0 disconnected
- (II) RADEON(0): Using fuzzy aspect match for initial modes
- (II) RADEON(0): Output VGA-0 using initial mode 1024x768
- (==) RADEON(0): DPI set to (96, 96)
- (II) Loading sub module "fb"
- (II) LoadModule: "fb"
- (II) Loading /usr/lib/xorg/modules//libfb.so
- (II) Module fb: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
- ABI class: X.Org ANSI C Emulation, version 0.4
- (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
- (II) Loading sub module "ramdac"
- (II) LoadModule: "ramdac"
- (II) Module "ramdac" already built-in
- (==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
- (II) Loading sub module "exa"
- (II) LoadModule: "exa"
- (II) Loading /usr/lib/xorg/modules//libexa.so
- (II) Module exa: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 2.4.0
- ABI class: X.Org Video Driver, version 5.0
- (!!) RADEON(0): For information on using the multimedia capabilities
- of this adapter, please see http://gatos.sf.net.
- (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
- (II) UnloadModule: "vesa"
- (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
- (--) Depth 24 pixmap format is 32 bpp
- (II) do I need RAC? No, I don't.
- (II) resource ranges after preInit:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
- [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
- [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
- [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
- [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
- (II) RADEON(0): RADEONScreenInit d0000000 0 0
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): Dynamic Power Management Disabled
- (==) RADEON(0): Using 24 bit depth buffer
- mc fb loc is 00df00d0
- (II) RADEON(0): RADEONInitMemoryMap() :
- (II) RADEON(0): mem_size : 0x10000000
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): Depth moves disabled by default
- (II) RADEON(0): Allocating from a screen of 262080 kb
- (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00400000
- (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00404000
- (II) RADEON(0): Will use 4096 kb for front buffer at offset 0x00000000
- (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
- (II) RADEON(0): Will use 4096 kb for back buffer at offset 0x00408000
- (II) RADEON(0): Will use 4096 kb for depth buffer at offset 0x00808000
- (II) RADEON(0): Will use 123904 kb for textures at offset 0x00c08000
- (II) RADEON(0): Will use 125856 kb for X Server offscreen at offset 0x08508000
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (II) [drm] DRM interface version 1.3
- (II) [drm] DRM open master succeeded.
- (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
- (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
- (II) RADEON(0): [drm] added 1 reserved context for kernel
- (II) RADEON(0): X context handle = 0x1
- (II) RADEON(0): [drm] installed DRM signal handler
- (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf991a000
- (II) RADEON(0): [pci] ring handle = 0xf991a000
- (II) RADEON(0): [pci] Ring mapped at 0xb7cca000
- (II) RADEON(0): [pci] Ring contents 0x00000000
- (II) RADEON(0): [pci] ring read ptr handle = 0xf9a1b000
- (II) RADEON(0): [pci] Ring read ptr mapped at 0xb7f38000
- (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
- (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9a1c000
- (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa7a2b000
- (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
- (II) RADEON(0): [pci] GART texture map handle = 0xf9c1c000
- (II) RADEON(0): [pci] GART Texture map mapped at 0xa5dab000
- (II) RADEON(0): [drm] register handle = 0xfdde0000
- (II) RADEON(0): [dri] Visual configs initialized
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (==) RADEON(0): Backing store disabled
- (II) RADEON(0): [DRI] installation complete
- (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
- (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
- (II) RADEON(0): [drm] dma control initialized, using IRQ 16
- (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
- (WW) RADEON(0): DRI init changed memory map, adjusting ...
- (WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
- (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- (II) RADEON(0): Direct rendering enabled
- (II) RADEON(0): Setting EXA maxPitchBytes
- (II) EXA(0): Offscreen pixmap area of 128876544 bytes
- (II) EXA(0): Driver registered support for the following operations:
- (II) Solid
- (II) Copy
- (II) Composite (RENDER acceleration)
- (II) UploadToScreen
- (II) DownloadFromScreen
- (II) RADEON(0): Acceleration enabled
- (II) RADEON(0): DPMS enabled
- (==) RADEON(0): Silken mouse enabled
- (II) RADEON(0): Set up textured video
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- (--) RandR disabled
- (II) Initializing built-in extension Generic Event Extension
- (II) Initializing built-in extension SHAPE
- (II) Initializing built-in extension MIT-SHM
- (II) Initializing built-in extension XInputExtension
- (II) Initializing built-in extension XTEST
- (II) Initializing built-in extension BIG-REQUESTS
- (II) Initializing built-in extension SYNC
- (II) Initializing built-in extension XKEYBOARD
- (II) Initializing built-in extension XC-MISC
- (II) Initializing built-in extension SECURITY
- (II) Initializing built-in extension XINERAMA
- (II) Initializing built-in extension XFIXES
- (II) Initializing built-in extension RENDER
- (II) Initializing built-in extension RANDR
- (II) Initializing built-in extension COMPOSITE
- (II) Initializing built-in extension DAMAGE
- (II) AIGLX: Screen 0 is not DRI2 capable
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 10, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 10, (OK)
- drmOpenByBusid: drmOpenMinor returns 10
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: cannot open shared object file: No such file or directory)
- (EE) AIGLX: reverting to software rendering
- (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
- (II) GLX: Initialized DRISWRAST GL provider for screen 0
- (II) RADEON(0): Setting screen physical size to 270 x 203
- (II) config/hal: Adding input device Macintosh mouse button emulation
- (II) LoadModule: "evdev"
- (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
- (II) Module evdev: vendor="X.Org Foundation"
- compiled for 1.6.1, module version = 2.2.2
- Module class: X.Org XInput Driver
- ABI class: X.Org XInput driver, version 4.0
- (**) Macintosh mouse button emulation: always reports core events
- (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
- (II) Macintosh mouse button emulation: Found 3 mouse buttons
- (II) Macintosh mouse button emulation: Found x and y relative axes
- (II) Macintosh mouse button emulation: Configuring as mouse
- (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
- (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
- (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
- (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
- (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
- (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (II) config/hal: Adding input device AT Translated Set 2 keyboard
- (**) AT Translated Set 2 keyboard: always reports core events
- (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
- (II) AT Translated Set 2 keyboard: Found keys
- (II) AT Translated Set 2 keyboard: Configuring as keyboard
- (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "evdev"
- (**) Option "xkb_layout" "us"
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- (II) RADEON(0): Total number of valid Screen mode(s) added: 0
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- (II) Macintosh mouse button emulation: Close
- (II) UnloadModule: "evdev"
- (II) Logitech USB-PS/2 Optical Mouse: Close
- (II) UnloadModule: "evdev"
- (II) AT Translated Set 2 keyboard: Close
- (II) UnloadModule: "evdev"
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (II) RADEON(0): [drm] removed 1 reserved context for kernel
- (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8058000 at 0xb7e9f000
- (II) RADEON(0): [drm] Closed DRM master.
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- (II) RADEON(0): RADEONScreenInit d0000000 0 0
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): Dynamic Power Management Disabled
- (==) RADEON(0): Using 24 bit depth buffer
- mc fb loc is 00df00d0
- (II) RADEON(0): RADEONInitMemoryMap() :
- (II) RADEON(0): mem_size : 0x10000000
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): Depth moves disabled by default
- (II) RADEON(0): Allocating from a screen of 262080 kb
- (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00300000
- (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00304000
- (II) RADEON(0): Will use 3072 kb for front buffer at offset 0x00000000
- (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
- (II) RADEON(0): Will use 3072 kb for back buffer at offset 0x00308000
- (II) RADEON(0): Will use 3072 kb for depth buffer at offset 0x00608000
- (II) RADEON(0): Will use 125952 kb for textures at offset 0x00908000
- (II) RADEON(0): Will use 126880 kb for X Server offscreen at offset 0x08408000
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (II) [drm] DRM interface version 1.3
- (II) [drm] DRM open master succeeded.
- (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
- (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
- (II) RADEON(0): [drm] added 1 reserved context for kernel
- (II) RADEON(0): X context handle = 0x1
- (II) RADEON(0): [drm] installed DRM signal handler
- (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf991a000
- (II) RADEON(0): [pci] ring handle = 0xf991a000
- (II) RADEON(0): [pci] Ring mapped at 0xb7cc8000
- (II) RADEON(0): [pci] Ring contents 0x00000000
- (II) RADEON(0): [pci] ring read ptr handle = 0xf9a1b000
- (II) RADEON(0): [pci] Ring read ptr mapped at 0xb7cc7000
- (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
- (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9a1c000
- (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa7a2b000
- (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
- (II) RADEON(0): [pci] GART texture map handle = 0xf9c1c000
- (II) RADEON(0): [pci] GART Texture map mapped at 0xa5dab000
- (II) RADEON(0): [drm] register handle = 0xfdde0000
- (II) RADEON(0): [dri] Visual configs initialized
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): [DRI] installation complete
- (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
- (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
- (II) RADEON(0): [drm] dma control initialized, using IRQ 16
- (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
- (WW) RADEON(0): DRI init changed memory map, adjusting ...
- (WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
- (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- (II) RADEON(0): Direct rendering enabled
- (II) RADEON(0): Setting EXA maxPitchBytes
- (II) EXA(0): Offscreen pixmap area of 129925120 bytes
- (II) EXA(0): Driver registered support for the following operations:
- (II) Solid
- (II) Copy
- (II) Composite (RENDER acceleration)
- (II) UploadToScreen
- (II) DownloadFromScreen
- (II) RADEON(0): Acceleration enabled
- (II) RADEON(0): DPMS enabled
- (II) RADEON(0): Set up textured video
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- (--) RandR disabled
- (II) AIGLX: Screen 0 is not DRI2 capable
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: drmOpenMinor returns 11
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: cannot open shared object file: No such file or directory)
- (EE) AIGLX: reverting to software rendering
- (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
- (II) GLX: Initialized DRISWRAST GL provider for screen 0
- (II) RADEON(0): Setting screen physical size to 270 x 203
- (EE) XKB: No components provided for device Virtual core keyboard
- (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
- [config/dbus] couldn't register object path
- (II) config/hal: Adding input device Macintosh mouse button emulation
- (**) Macintosh mouse button emulation: always reports core events
- (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
- (II) Macintosh mouse button emulation: Found 3 mouse buttons
- (II) Macintosh mouse button emulation: Found x and y relative axes
- (II) Macintosh mouse button emulation: Configuring as mouse
- (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
- (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
- (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
- (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
- (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (II) config/hal: Adding input device AT Translated Set 2 keyboard
- (**) AT Translated Set 2 keyboard: always reports core events
- (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
- (II) AT Translated Set 2 keyboard: Found keys
- (II) AT Translated Set 2 keyboard: Configuring as keyboard
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "evdev"
- (**) Option "xkb_layout" "us"
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- (II) RADEON(0): Total number of valid Screen mode(s) added: 0
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- (II) Macintosh mouse button emulation: Close
- (II) UnloadModule: "evdev"
- (II) Logitech USB-PS/2 Optical Mouse: Close
- (II) UnloadModule: "evdev"
- (II) AT Translated Set 2 keyboard: Close
- (II) UnloadModule: "evdev"
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (II) RADEON(0): [drm] removed 1 reserved context for kernel
- (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8058000 at 0xb7dc9000
- (II) RADEON(0): [drm] Closed DRM master.
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- (II) RADEON(0): RADEONScreenInit d0000000 0 0
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): Dynamic Power Management Disabled
- (==) RADEON(0): Using 24 bit depth buffer
- mc fb loc is 00df00d0
- (II) RADEON(0): RADEONInitMemoryMap() :
- (II) RADEON(0): mem_size : 0x10000000
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): Depth moves disabled by default
- (II) RADEON(0): Allocating from a screen of 262080 kb
- (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00300000
- (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00304000
- (II) RADEON(0): Will use 3072 kb for front buffer at offset 0x00000000
- (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
- (II) RADEON(0): Will use 3072 kb for back buffer at offset 0x00308000
- (II) RADEON(0): Will use 3072 kb for depth buffer at offset 0x00608000
- (II) RADEON(0): Will use 125952 kb for textures at offset 0x00908000
- (II) RADEON(0): Will use 126880 kb for X Server offscreen at offset 0x08408000
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (II) [drm] DRM interface version 1.3
- (II) [drm] DRM open master succeeded.
- (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
- (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
- (II) RADEON(0): [drm] added 1 reserved context for kernel
- (II) RADEON(0): X context handle = 0x1
- (II) RADEON(0): [drm] installed DRM signal handler
- (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf991a000
- (II) RADEON(0): [pci] ring handle = 0xf991a000
- (II) RADEON(0): [pci] Ring mapped at 0xb7cc8000
- (II) RADEON(0): [pci] Ring contents 0x00000000
- (II) RADEON(0): [pci] ring read ptr handle = 0xf9a1b000
- (II) RADEON(0): [pci] Ring read ptr mapped at 0xb7cc7000
- (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
- (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9a1c000
- (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa7a2b000
- (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
- (II) RADEON(0): [pci] GART texture map handle = 0xf9c1c000
- (II) RADEON(0): [pci] GART Texture map mapped at 0xa5dab000
- (II) RADEON(0): [drm] register handle = 0xfdde0000
- (II) RADEON(0): [dri] Visual configs initialized
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): [DRI] installation complete
- (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
- (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
- (II) RADEON(0): [drm] dma control initialized, using IRQ 16
- (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
- (WW) RADEON(0): DRI init changed memory map, adjusting ...
- (WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
- (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- (II) RADEON(0): Direct rendering enabled
- (II) RADEON(0): Setting EXA maxPitchBytes
- (II) EXA(0): Offscreen pixmap area of 129925120 bytes
- (II) EXA(0): Driver registered support for the following operations:
- (II) Solid
- (II) Copy
- (II) Composite (RENDER acceleration)
- (II) UploadToScreen
- (II) DownloadFromScreen
- (II) RADEON(0): Acceleration enabled
- (II) RADEON(0): DPMS enabled
- (II) RADEON(0): Set up textured video
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- (--) RandR disabled
- (II) AIGLX: Screen 0 is not DRI2 capable
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: drmOpenMinor returns 11
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: cannot open shared object file: No such file or directory)
- (EE) AIGLX: reverting to software rendering
- (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
- (II) GLX: Initialized DRISWRAST GL provider for screen 0
- (II) RADEON(0): Setting screen physical size to 270 x 203
- (EE) XKB: No components provided for device Virtual core keyboard
- (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
- [config/dbus] couldn't register object path
- (II) config/hal: Adding input device Macintosh mouse button emulation
- (**) Macintosh mouse button emulation: always reports core events
- (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
- (II) Macintosh mouse button emulation: Found 3 mouse buttons
- (II) Macintosh mouse button emulation: Found x and y relative axes
- (II) Macintosh mouse button emulation: Configuring as mouse
- (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
- (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
- (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
- (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
- (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (II) config/hal: Adding input device AT Translated Set 2 keyboard
- (**) AT Translated Set 2 keyboard: always reports core events
- (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
- (II) AT Translated Set 2 keyboard: Found keys
- (II) AT Translated Set 2 keyboard: Configuring as keyboard
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "evdev"
- (**) Option "xkb_layout" "us"
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
- (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
- (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
- (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- (II) RADEON(0): Total number of valid Screen mode(s) added: 0
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- (II) Macintosh mouse button emulation: Close
- (II) UnloadModule: "evdev"
- (II) Logitech USB-PS/2 Optical Mouse: Close
- (II) UnloadModule: "evdev"
- (II) AT Translated Set 2 keyboard: Close
- (II) UnloadModule: "evdev"
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (II) RADEON(0): [drm] removed 1 reserved context for kernel
- (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8058000 at 0xb7dc9000
- (II) RADEON(0): [drm] Closed DRM master.
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- (II) RADEON(0): RADEONScreenInit d0000000 0 0
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): Dynamic Power Management Disabled
- (==) RADEON(0): Using 24 bit depth buffer
- mc fb loc is 00df00d0
- (II) RADEON(0): RADEONInitMemoryMap() :
- (II) RADEON(0): mem_size : 0x10000000
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): Depth moves disabled by default
- (II) RADEON(0): Allocating from a screen of 262080 kb
- (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00300000
- (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00304000
- (II) RADEON(0): Will use 3072 kb for front buffer at offset 0x00000000
- (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
- (II) RADEON(0): Will use 3072 kb for back buffer at offset 0x00308000
- (II) RADEON(0): Will use 3072 kb for depth buffer at offset 0x00608000
- (II) RADEON(0): Will use 125952 kb for textures at offset 0x00908000
- (II) RADEON(0): Will use 126880 kb for X Server offscreen at offset 0x08408000
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (II) [drm] DRM interface version 1.3
- (II) [drm] DRM open master succeeded.
- (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
- (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
- (II) RADEON(0): [drm] added 1 reserved context for kernel
- (II) RADEON(0): X context handle = 0x1
- (II) RADEON(0): [drm] installed DRM signal handler
- (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf991a000
- (II) RADEON(0): [pci] ring handle = 0xf991a000
- (II) RADEON(0): [pci] Ring mapped at 0xb7cc8000
- (II) RADEON(0): [pci] Ring contents 0x00000000
- (II) RADEON(0): [pci] ring read ptr handle = 0xf9a1b000
- (II) RADEON(0): [pci] Ring read ptr mapped at 0xb7cc7000
- (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
- (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9a1c000
- (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa7a2b000
- (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
- (II) RADEON(0): [pci] GART texture map handle = 0xf9c1c000
- (II) RADEON(0): [pci] GART Texture map mapped at 0xa5dab000
- (II) RADEON(0): [drm] register handle = 0xfdde0000
- (II) RADEON(0): [dri] Visual configs initialized
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): [DRI] installation complete
- (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
- (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
- (II) RADEON(0): [drm] dma control initialized, using IRQ 16
- (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
- (WW) RADEON(0): DRI init changed memory map, adjusting ...
- (WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
- (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- (II) RADEON(0): Direct rendering enabled
- (II) RADEON(0): Setting EXA maxPitchBytes
- (II) EXA(0): Offscreen pixmap area of 129925120 bytes
- (II) EXA(0): Driver registered support for the following operations:
- (II) Solid
- (II) Copy
- (II) Composite (RENDER acceleration)
- (II) UploadToScreen
- (II) DownloadFromScreen
- (II) RADEON(0): Acceleration enabled
- (II) RADEON(0): DPMS enabled
- (II) RADEON(0): Set up textured video
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- (--) RandR disabled
- (II) AIGLX: Screen 0 is not DRI2 capable
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: drmOpenMinor returns 11
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: cannot open shared object file: No such file or directory)
- (EE) AIGLX: reverting to software rendering
- (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
- (II) GLX: Initialized DRISWRAST GL provider for screen 0
- (II) RADEON(0): Setting screen physical size to 270 x 203
- (EE) XKB: No components provided for device Virtual core keyboard
- (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
- [config/dbus] couldn't register object path
- (II) config/hal: Adding input device Macintosh mouse button emulation
- (**) Macintosh mouse button emulation: always reports core events
- (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
- (II) Macintosh mouse button emulation: Found 3 mouse buttons
- (II) Macintosh mouse button emulation: Found x and y relative axes
- (II) Macintosh mouse button emulation: Configuring as mouse
- (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
- (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
- (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
- (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
- (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (II) config/hal: Adding input device AT Translated Set 2 keyboard
- (**) AT Translated Set 2 keyboard: always reports core events
- (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
- (II) AT Translated Set 2 keyboard: Found keys
- (II) AT Translated Set 2 keyboard: Configuring as keyboard
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "evdev"
- (**) Option "xkb_layout" "us"
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
- (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
- (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
- (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- (II) RADEON(0): Total number of valid Screen mode(s) added: 0
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
- (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
- (II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
- (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
- (II) Macintosh mouse button emulation: Close
- (II) UnloadModule: "evdev"
- (II) Logitech USB-PS/2 Optical Mouse: Close
- (II) UnloadModule: "evdev"
- (II) AT Translated Set 2 keyboard: Close
- (II) UnloadModule: "evdev"
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- (II) RADEON(0): avivo_restore !
- Enable CRTC 0 success
- Unblank CRTC 0 success
- (II) RADEON(0): [drm] removed 1 reserved context for kernel
- (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8058000 at 0xb7dc9000
- (II) RADEON(0): [drm] Closed DRM master.
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- (II) RADEON(0): RADEONScreenInit d0000000 0 0
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): Dynamic Power Management Disabled
- (==) RADEON(0): Using 24 bit depth buffer
- mc fb loc is 00df00d0
- (II) RADEON(0): RADEONInitMemoryMap() :
- (II) RADEON(0): mem_size : 0x10000000
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): Depth moves disabled by default
- (II) RADEON(0): Allocating from a screen of 262080 kb
- (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00300000
- (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00304000
- (II) RADEON(0): Will use 3072 kb for front buffer at offset 0x00000000
- (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
- (II) RADEON(0): Will use 3072 kb for back buffer at offset 0x00308000
- (II) RADEON(0): Will use 3072 kb for depth buffer at offset 0x00608000
- (II) RADEON(0): Will use 125952 kb for textures at offset 0x00908000
- (II) RADEON(0): Will use 126880 kb for X Server offscreen at offset 0x08408000
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (II) [drm] DRM interface version 1.3
- (II) [drm] DRM open master succeeded.
- (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
- (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
- (II) RADEON(0): [drm] added 1 reserved context for kernel
- (II) RADEON(0): X context handle = 0x1
- (II) RADEON(0): [drm] installed DRM signal handler
- (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf991a000
- (II) RADEON(0): [pci] ring handle = 0xf991a000
- (II) RADEON(0): [pci] Ring mapped at 0xb7cc8000
- (II) RADEON(0): [pci] Ring contents 0x00000000
- (II) RADEON(0): [pci] ring read ptr handle = 0xf9a1b000
- (II) RADEON(0): [pci] Ring read ptr mapped at 0xb7cc7000
- (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
- (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9a1c000
- (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa7a2b000
- (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
- (II) RADEON(0): [pci] GART texture map handle = 0xf9c1c000
- (II) RADEON(0): [pci] GART Texture map mapped at 0xa5dab000
- (II) RADEON(0): [drm] register handle = 0xfdde0000
- (II) RADEON(0): [dri] Visual configs initialized
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- (II) RADEON(0): [DRI] installation complete
- (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
- (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
- (II) RADEON(0): [drm] dma control initialized, using IRQ 16
- (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
- (WW) RADEON(0): DRI init changed memory map, adjusting ...
- (WW) RADEON(0): MC_FB_LOCATION was: 0x00df00d0 is: 0x00df00d0
- (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- (II) RADEON(0): Direct rendering enabled
- (II) RADEON(0): Setting EXA maxPitchBytes
- (II) EXA(0): Offscreen pixmap area of 129925120 bytes
- (II) EXA(0): Driver registered support for the following operations:
- (II) Solid
- (II) Copy
- (II) Composite (RENDER acceleration)
- (II) UploadToScreen
- (II) DownloadFromScreen
- (II) RADEON(0): Acceleration enabled
- (II) RADEON(0): DPMS enabled
- (II) RADEON(0): Set up textured video
- Output DFP1 disable success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Mode 1024x768 - 1344 806 10
- (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x00df00d0
- (II) RADEON(0): MC_AGP_LOCATION : 0x00030000
- freq: 65000000
- best_freq: 65000000
- best_feedback_div: 130
- best_frac_feedback_div: 0
- best_ref_div: 3
- best_post_div: 18
- (II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
- (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x82(130), fracfbdiv 0, pdiv 18
- Set CRTC 0 PLL success
- Set CRTC Timing success
- Set CRTC 0 Overscan success
- Not using RMX
- scaler 0 setup success
- Set CRTC 0 Source success
- crtc 0 YUV disable setup success
- Output DAC2 setup success
- Output CRT2 enable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output DFP1 disable success
- Blank CRTC 1 success
- Disable CRTC 1 success
- (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- (--) RandR disabled
- (II) AIGLX: Screen 0 is not DRI2 capable
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 11, (OK)
- drmOpenByBusid: drmOpenMinor returns 11
- drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: cannot open shared object file: No such file or directory)
- (EE) AIGLX: reverting to software rendering
- (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
- (II) GLX: Initialized DRISWRAST GL provider for screen 0
- (II) RADEON(0): Setting screen physical size to 270 x 203
- (EE) XKB: No components provided for device Virtual core keyboard
- (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
- [config/dbus] couldn't register object path
- (II) config/hal: Adding input device Macintosh mouse button emulation
- (**) Macintosh mouse button emulation: always reports core events
- (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
- (II) Macintosh mouse button emulation: Found 3 mouse buttons
- (II) Macintosh mouse button emulation: Found x and y relative axes
- (II) Macintosh mouse button emulation: Configuring as mouse
- (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
- (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
- (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
- (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
- (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (II) config/hal: Adding input device AT Translated Set 2 keyboard
- (**) AT Translated Set 2 keyboard: always reports core events
- (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
- (II) AT Translated Set 2 keyboard: Found keys
- (II) AT Translated Set 2 keyboard: Configuring as keyboard
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "evdev"
- (**) Option "xkb_layout" "us"
- (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
- (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
- Dac detection success
- (II) RADEON(0): Total number of valid Screen mode(s) added: 0
- (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
- Dac detection success
- Unhandled monitor type 0
- (II) config/hal: removing device Logitech USB-PS/2 Optical Mouse
- (II) Logitech USB-PS/2 Optical Mouse: Close
- (II) UnloadModule: "evdev"
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (WW) config/hal: device Logitech USB-PS/2 Optical Mouse already added. Ignoring.
- (WW) config/hal: device Logitech USB-PS/2 Optical Mouse already added. Ignoring.
- (WW) config/hal: device Logitech USB-PS/2 Optical Mouse already added. Ignoring.
- (WW) config/hal: device Logitech USB-PS/2 Optical Mouse already added. Ignoring.
- Output CRT2 disable success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Blank CRTC 1 success
- Disable CRTC 1 success
- Blank CRTC 0 success
- Disable CRTC 0 success
- Output CRT2 disable success
- Enable CRTC 0 success
- Unblank CRTC 0 success
- Output CRT2 enable success
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement