Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # dmesg
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Linux version 3.4.113 (root@1058e7ceca8f) (gcc version 4.9.3 (Buildroot 2016.05-git-gaf97a9710) ) #1 SMP PREEMPT Sat Jun 15 06:38:31 UTC 2019
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: dma_declare_contiguous(278): ION reserve area(0x46c00000~0x50400000) exceed phys memory! adjust size to 148MBytes
- [ 0.000000] cma: CMA: reserved 148 MiB at 46c00000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 65536
- [ 0.000000] free_area_init_node: node 0, pgdat c06c1c40, node_mem_map c0808000
- [ 0.000000] Normal zone: 576 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 64960 pages, LIFO batch:15
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0a5c000 s6592 r8192 d13888 u32768
- [ 0.000000] pcpu-alloc: s6592 r8192 d13888 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960
- [ 0.000000] Kernel command line: boot_type=0 disp_para=100 fb_base=0x0 config_size=42220 boot.serialno=282789088046ffffc566 boot.hardware=sun8i console=ttyS0,115200 noinitrd root=/dev/nandd rootfstype=ext4 rootwait init=/sbin/init ion_cma_512m=150m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=0 partitions=boot-res@nanda:env@nandb:boot@nandc:rootfs@nandd:rootfs_data@nande:misc@nandf:UDISK@nandg
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 256MB = 256MB total
- [ 0.000000] Memory: 99292k/99292k available, 162852k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc062ba08 (6287 kB)
- [ 0.000000] .init : 0xc062c000 - 0xc065d9c0 ( 199 kB)
- [ 0.000000] .data : 0xc065e000 - 0xc06c2a40 ( 403 kB)
- [ 0.000000] .bss : 0xc06c4098 - 0xc08070b8 (1293 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:416
- [ 0.000000] try to syncboot of clk ats
- [ 0.000000] try to syncboot of clk usbphy0
- [ 0.000000] try to syncboot of clk sdmmc2mod
- [ 0.000000] try to syncboot of clk uart0
- [ 0.000000] try to syncboot of clk pll_ddr1
- [ 0.000000] try to syncboot of clk debe0
- [ 0.000000] try to syncboot of clk nand
- [ 0.000000] try to syncboot of clk dma
- [ 0.000000] try to syncboot of clk sat
- [ 0.000000] try to syncboot of clk usbotg
- [ 0.000000] try to syncboot of clk pio
- [ 0.000000] try to syncboot of clk mbus
- [ 0.000000] try to syncboot of clk drc0
- [ 0.000000] try to syncboot of clk lcd0ch0
- [ 0.000000] try to syncboot of clk axi
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000183] Calibrating delay loop (skipped), value calculated using timer frequency.. 14405.00 BogoMIPS (lpj=24000000)
- [ 0.000202] pid_max: default: 4096 minimum: 301
- [ 0.000353] Security Framework initialized
- [ 0.000375] SELinux: Initializing.
- [ 0.000420] SELinux: Starting in permissive mode
- [ 0.000431] AppArmor: AppArmor disabled by boot time parameter
- [ 0.000505] Mount-cache hash table entries: 512
- [ 0.001238] CPU: Testing write buffer coherency: ok
- [ 0.001438] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.001450] [sunxi_smp_prepare_cpus] enter
- [ 0.001485] Setting up static identity map for 0x404e8e28 - 0x404e8e80
- [ 0.003333] CPU1: Booted secondary processor
- [ 0.003333] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.003333] CPU2: Booted secondary processor
- [ 0.003333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.003333] CPU3: Booted secondary processor
- [ 0.003333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.043483] Brought up 4 CPUs
- [ 0.043483] SMP: Total of 4 processors activated (57623.00 BogoMIPS).
- [ 0.046921] devtmpfs: initialized
- [ 0.051966] pinctrl core: initialized pinctrl subsystem
- [ 0.051966] dummy:
- [ 0.057516] NET: Registered protocol family 16
- [ 0.065830] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.065902] script_sysfs_init success
- [ 0.065931] sunxi_dump_init success
- [ 0.066166] sunxi pinctrl probe enter
- [ 0.066899] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.068033] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.068218] axp_pinctrl_probe enter...
- [ 0.068372] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
- [ 0.068389] mainkey total count : 79
- [ 0.068398] mainkey name : product, pin count : 0
- [ 0.068406] mainkey name : platform, pin count : 2
- [ 0.068416] mainkey name : target, pin count : 0
- [ 0.068425] mainkey name : power_sply, pin count : 0
- [ 0.068434] mainkey name : key_detect_en, pin count : 0
- [ 0.068443] mainkey name : fel_key, pin count : 1
- [ 0.068452] mainkey name : gpiokey_para, pin count : 2
- [ 0.068462] mainkey name : card_boot, pin count : 0
- [ 0.068471] mainkey name : card0_boot_para, pin count : 6
- [ 0.068482] mainkey name : card2_boot_para, pin count : 10
- [ 0.068494] mainkey name : twi_para, pin count : 2
- [ 0.068504] mainkey name : uart_para, pin count : 2
- [ 0.068515] mainkey name : force_uart_para, pin count : 2
- [ 0.068524] mainkey name : jtag_para, pin count : 4
- [ 0.068534] mainkey name : clock, pin count : 0
- [ 0.068543] mainkey name : pm_para, pin count : 0
- [ 0.068553] mainkey name : dram_para, pin count : 0
- [ 0.068562] mainkey name : pm_para, pin count : 0
- [ 0.068571] mainkey name : wakeup_src_para, pin count : 1
- [ 0.068580] mainkey name : twi0, pin count : 2
- [ 0.068589] mainkey name : twi1, pin count : 2
- [ 0.068598] mainkey name : twi2, pin count : 2
- [ 0.068607] mainkey name : uart0, pin count : 2
- [ 0.068616] mainkey name : uart1, pin count : 4
- [ 0.068626] mainkey name : uart2, pin count : 2
- [ 0.068635] mainkey name : uart3, pin count : 4
- [ 0.068644] mainkey name : uart4, pin count : 4
- [ 0.068653] mainkey name : spi0, pin count : 4
- [ 0.068662] mainkey name : spi1, pin count : 4
- [ 0.068672] mainkey name : spi_devices, pin count : 0
- [ 0.068681] mainkey name : spi_board0, pin count : 0
- [ 0.068690] mainkey name : ctp_para, pin count : 2
- [ 0.068699] mainkey name : ctp_list_para, pin count : 0
- [ 0.068709] mainkey name : tkey_para, pin count : 0
- [ 0.068718] mainkey name : motor_para, pin count : 1
- [ 0.068728] map mainkey [motor_para] to pinctrl, map number [2]
- [ 0.068739] mainkey name : ths_para, pin count : 0
- [ 0.068748] mainkey name : cooler_table, pin count : 0
- [ 0.068758] mainkey name : nand0_para, pin count : 19
- [ 0.068769] mainkey name : hdmi_ep952_para, pin count : 2
- [ 0.068779] mainkey name : disp_init, pin count : 0
- [ 0.068788] mainkey name : lcd0_para, pin count : 29
- [ 0.068800] mainkey name : pwm0_para, pin count : 1
- [ 0.068811] mainkey name : pwm1_para, pin count : 1
- [ 0.068821] mainkey name : csi0, pin count : 16
- [ 0.068833] mainkey name : led_para, pin count : 2
- [ 0.068843] mainkey name : mmc0_para, pin count : 7
- [ 0.068854] mainkey name : mmc1_para, pin count : 6
- [ 0.068864] mainkey name : mmc2_para, pin count : 11
- [ 0.068875] mainkey name : usbc0, pin count : 3
- [ 0.068884] map mainkey [usbc0] to pinctrl, map number [2]
- [ 0.068894] mainkey name : usbc1, pin count : 0
- [ 0.068903] mainkey name : usb_feature, pin count : 0
- [ 0.068913] mainkey name : msc_feature, pin count : 0
- [ 0.068922] mainkey name : gsensor_para, pin count : 1
- [ 0.068932] mainkey name : gsensor_list_para, pin count : 0
- [ 0.068942] mainkey name : rf_para, pin count : 0
- [ 0.068951] mainkey name : wifi_para, pin count : 2
- [ 0.068961] mainkey name : bt_para, pin count : 3
- [ 0.068971] mainkey name : gps_para, pin count : 2
- [ 0.068980] mainkey name : 3g_para, pin count : 4
- [ 0.068990] mainkey name : gy_para, pin count : 0
- [ 0.068999] mainkey name : gy_list_para, pin count : 0
- [ 0.069009] mainkey name : ls_para, pin count : 1
- [ 0.069019] mainkey name : ls_list_para, pin count : 0
- [ 0.069028] mainkey name : compass_para, pin count : 0
- [ 0.069038] mainkey name : i2s0, pin count : 3
- [ 0.069047] mainkey name : i2s1, pin count : 4
- [ 0.069057] mainkey name : audio0, pin count : 0
- [ 0.069066] mainkey name : pmu1_para, pin count : 0
- [ 0.069075] mainkey name : pmu2_para, pin count : 0
- [ 0.069085] mainkey name : dvfs_table, pin count : 0
- [ 0.069094] mainkey name : Vdevice, pin count : 2
- [ 0.069104] mainkey name : s_uart0, pin count : 2
- [ 0.069114] mainkey name : s_rsb0, pin count : 2
- [ 0.069123] mainkey name : s_jtag0, pin count : 4
- [ 0.069133] mainkey name : s_powchk, pin count : 0
- [ 0.069143] mainkey name : mali_para, pin count : 0
- [ 0.069152] mainkey name : dram_dvfs_table, pin count : 0
- [ 0.069162] mainkey name : charging_type, pin count : 0
- [ 0.069172] mainkey name : dram_scene_table, pin count : 0
- [ 0.069180] axp pinctrl driver probe ok
- [ 0.070116] sunxi_dev_init 453 gpio_buttons_data.nbuttons=2
- [ 0.070131] sunxi_dev_init 479 gpio_buttons[i].gpio=359 gpio_buttons[i].code=116
- [ 0.070145] sunxi_dev_init 479 gpio_buttons[i].gpio=356 gpio_buttons[i].code=102
- [ 0.070449] [sunxi-module]: [sunxi-module.0] probe success
- [ 0.070487] script config pll3 to 297 Mhz
- [ 0.070500] script config pll4 to 300 Mhz
- [ 0.070530] script config pll6 to 600 Mhz
- [ 0.070542] script config pll8 to 384 Mhz
- [ 0.070560] script config pll9 to 480 Mhz
- [ 0.070573] script config pll10 to 297 Mhz
- [ 0.070580] sunxi_default_clk_init
- [ 0.070588] try to set pll6ahb1 to 200000000
- [ 0.070637] try to set ahb clk source to pll6ahb1
- [ 0.070646] set ahb clk source to pll6ahb1
- [ 0.070656] try to set ahb1 to 200000000
- [ 0.070666] try to set apb1 to 100000000
- [ 0.076815] bio: create slab <bio-0> at 0
- [ 0.080090] [ARISC] :sunxi-arisc driver v1.60
- [ 0.113479] [ARISC] :arisc version: [v0.0.23.1]
- [ 0.113491] [sunxi-module]: arisc register success
- [ 0.328592] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
- [ 0.330422] SCSI subsystem initialized
- [ 0.330550] usbcore: registered new interface driver usbfs
- [ 0.330618] usbcore: registered new interface driver hub
- [ 0.333372] usbcore: registered new device driver usb
- [ 0.333489] twi_chan_cfg()350 - [twi0] has no twi_regulator.
- [ 0.333503] twi_chan_cfg()350 - [twi1] has no twi_regulator.
- [ 0.333516] twi_chan_cfg()350 - [twi2] has no twi_regulator.
- [ 0.334113] Linux video capture interface: v2.00
- [ 0.333363] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
- [ 0.336736] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
- [ 0.336901] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
- [ 0.336901] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
- [ 0.336901] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
- [ 0.336901] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
- [ 0.336901] axp22_rtc: 3000 mV
- [ 0.336901] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
- [ 0.336901] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
- [ 0.336901] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
- [ 0.336901] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
- [ 0.336901] axp22_dldo2: 700 <--> 3300 mV at 700 mV
- [ 0.336901] axp22_dldo3: 700 <--> 3300 mV at 700 mV
- [ 0.340070] axp22_dldo4: 700 <--> 3300 mV at 700 mV
- [ 0.340210] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
- [ 0.340210] axp22_eldo1: supplied by axp22_dcdc1
- [ 0.340239] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
- [ 0.340239] axp22_eldo2: supplied by axp22_dcdc1
- [ 0.340243] axp22_eldo3: 700 <--> 3300 mV at 700 mV
- [ 0.340243] axp22_eldo3: supplied by axp22_dcdc1
- [ 0.340243] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
- [ 0.340243] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
- [ 0.340243] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
- [ 0.340243] axp22_dc1sw: at 700 mV
- [ 0.340243] axp22_dc1sw: supplied by axp22_dcdc1
- [ 0.340372] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
- [ 0.343861] now_rest_vol = 0
- [ 0.343861] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.347305] Switching to clocksource arch_sys_counter
- [ 0.347610] FS-Cache: Loaded
- [ 0.347670] CacheFiles: Loaded
- [ 0.347670] [DISP]disp_module_init
- [ 0.347670] [DISP]disp_probe
- [ 0.347670] disp_init_lcd==============
- [ 0.347837] [DISP] OSAL_Pwm_request,line:12: OSAL_Pwm_request pwm 1 fail!
- [ 0.356730] lcd_clk_config111 ======lcd ddddclk = 74250000
- [ 0.356740] lcd_clk_config222 ======lcd ddddclk = 74250000
- [ 0.356751] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
- [ 0.356762] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
- [ 0.357135] [DISP] OSAL_Pwm_Set_Polarity,line:95: OSAL_Pwm_Set_Polarity, handle is NULL!
- [ 0.357150] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
- [ 0.357279] start_work================111
- [ 0.357295] [DISP]Fb_Init
- [ 0.357364] [DISP] parser_disp_init_para,line:130: fetch script data disp_init.screen2_output_type fail
- [ 0.357380] [DISP] parser_disp_init_para,line:147: fetch script data disp_init.screen2_output_mode fail
- [ 0.357406] [DISP] parser_disp_init_para,line:208: fetch script data disp_init.fb2_format fail
- [ 0.357421] [DISP] parser_disp_init_para,line:213: fetch script data disp_init.fb2_scaler_mode_enable fail
- [ 0.357437] [DISP] parser_disp_init_para,line:218: fetch script data disp_init.fb2_width fail
- [ 0.357452] [DISP] parser_disp_init_para,line:223: fetch script data disp_init.fb2_height fail
- [ 0.366079] [DISP]disp_probe finish
- [ 0.366159] [DISP]capture_module_init
- [ 0.366460] [DISP]capture_probe
- [ 0.366489] [DISP]capture finish
- [ 0.366499] [DISP]disp_module_init finish
- [ 0.366507] [LCD]lcd_module_init
- [ 0.366660] LCD_set_panel_funs: ====
- [ 0.366698] disp_lcd_get_driver_name, EP952
- [ 0.366707] gdisp.init_para.start_process
- [ 0.366727] start_work================111
- [ 0.366735] extern hdmi type...
- [ 0.366750] disp_lcd_get_driver_name, EP952
- [ 0.366757] gdisp.init_para.start_process
- [ 0.366771] start_work================111
- [ 0.366778] extern hdmi type...
- [ 0.366791] disp_lcd_get_driver_name, EP952
- [ 0.366798] gdisp.init_para.start_process
- [ 0.366811] start_work================111
- [ 0.366818] extern hdmi type...
- [ 0.366831] disp_lcd_get_driver_name, EP952
- [ 0.366838] gdisp.init_para.start_process
- [ 0.366851] start_work================111
- [ 0.366858] extern hdmi type...
- [ 0.366871] disp_lcd_get_driver_name, EP952
- [ 0.366878] gdisp.init_para.start_process
- [ 0.366891] start_work================111
- [ 0.366898] extern hdmi type...
- [ 0.366910] disp_lcd_get_driver_name, EP952
- [ 0.366918] gdisp.init_para.start_process
- [ 0.366931] start_work================111
- [ 0.366938] extern hdmi type...
- [ 0.366950] disp_lcd_get_driver_name, EP952
- [ 0.366957] gdisp.init_para.start_process
- [ 0.366970] start_work================111
- [ 0.366978] extern hdmi type...
- [ 0.366990] disp_lcd_get_driver_name, EP952
- [ 0.366998] set ep952 lcd
- [ 0.367004] gdisp.init_para.start_process
- [ 0.367017] start_work================111
- [ 0.367024] extern hdmi type...
- [ 0.367036] [LCD]lcd_module_init finish
- [ 0.367044] [HDMI]ep952_module_init begin
- [ 0.367053] hdmi used.
- [ 0.367062] hdmi i2c id = 0
- [ 0.367108] hdmi_i2c_detect=============
- [ 0.367116] hdmi_i2c_detect==111111===========
- [ 0.367125] [DISP_I2C] hdmi_i2c_detect, get right i2c adapter, id=0, i2c adapter=c6525810
- [ 0.367229] hdmi_i2c_probe:544
- [ 0.367237] hdmi_i2c_probe:572
- [ 0.367244] hdmi_parse_config:104
- [ 0.367252] hdmi_parse_config:113
- [ 0.367260] gpio get success!
- [ 0.367267] hdmi_parse_config:113
- [ 0.367274] gpio get success!
- [ 0.367354] hdmi_parse_config:133
- [ 0.367363] EP952 Code Version : 52.1
- [ 0.367371] hdmi_gpio_config:141
- [ 0.367379] hdmi_gpio_config: gpio_info->mul_sel = 1
- [ 0.380030] hdmi_gpio_config:141
- [ 0.380038] hdmi_gpio_config: gpio_info->mul_sel = 7
- [ 0.396427] < EP952 Tx Power Down >
- [ 0.403000] < EP952 Audio_Mute_enable >
- [ 0.404653] < EP952 Video_Mute_enable >
- [ 0.406301] User define - Disable HDCP function
- [ 0.415948] gdisp.init_para.start_process
- [ 0.415956] ep952_thread:303
- [ 0.415974] start_work================111
- [ 0.415981] extern hdmi type...
- [ 0.415989] hdmi register
- [ 0.415996] bsp_disp_ep952_set_mode: ====
- [ 0.416004] ep952_set_mode: ====hdmi_mode = 5
- [ 0.416013] ep952_set_mode: ====g_hdmi_vic = 4
- [ 0.416022] disp_lcd_set_hdmi_mode...pixel_clk = 74250000drv_lcd_enable: ====
- [ 0.416134] disp_lcd_pre_enable: ====
- [ 0.416200] lcd_clk_config111 ======lcd ddddclk = 74250000
- [ 0.416210] lcd_clk_config222 ======lcd ddddclk = 74250000
- [ 0.416220] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
- [ 0.416231] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
- [ 0.416725] hdmi_i2c_detect=============
- [ 0.416735] err.
- [ 0.417136] [LCD]open, step 0 finish
- [ 0.426187] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
- [ 0.426202] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
- [ 0.426216] [sunxi_hci_sunxi]: get usb_regulator is nocare
- [ 0.426243] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
- [ 0.426255] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
- [ 0.426267] [sunxi_hci_sunxi]: get usb_regulator is nocare
- [ 0.426497] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
- [ 0.426523] get usbc0(usb_restrict pin) failed
- [ 0.426620] [sw_udc]: udc_init: version 20080411
- [ 0.426716] [sw_udc]: usb_vbase = 0xf1c19000
- [ 0.426728] [sw_udc]: sram_vbase = 0xf1c00000
- [ 0.426747] [sw_udc]: open_usb_clock
- [ 0.426794] udc->driver is null, udc is need not stop
- [ 0.427139] [ddrfreq] dram_clk value is 600
- [ 0.427148] [ddrfreq] sunxi_ddrfreq_max=600000
- [ 0.427157] [ddrfreq] dram_type value is 3
- [ 0.427166] [ddrfreq] dram_zq value is 0x3bbb
- [ 0.427175] [ddrfreq] dram_odt_en value is 1
- [ 0.427184] [ddrfreq] dram_para1 value is 0x10e20100
- [ 0.427193] [ddrfreq] dram_para2 value is 0x0
- [ 0.427202] [ddrfreq] dram_mr0 value is 0x1c70
- [ 0.427211] [ddrfreq] dram_mr1 value is 0x40
- [ 0.427220] [ddrfreq] dram_mr2 value is 0x18
- [ 0.427229] [ddrfreq] dram_mr3 value is 0x0
- [ 0.427238] [ddrfreq] dram_tpr0 value is 0x47a14f
- [ 0.427247] [ddrfreq] dram_tpr1 value is 0x1c2294c
- [ 0.427257] [ddrfreq] dram_tpr2 value is 0x69049
- [ 0.427265] [ddrfreq] dram_tpr3 value is 0x0
- [ 0.427274] [ddrfreq] dram_tpr4 value is 0x0
- [ 0.427283] [ddrfreq] dram_tpr5 value is 0x0
- [ 0.427292] [ddrfreq] dram_tpr6 value is 0x0
- [ 0.427301] [ddrfreq] dram_tpr7 value is 0x0
- [ 0.427309] [ddrfreq] dram_tpr8 value is 0x0
- [ 0.427318] [ddrfreq] dram_tpr9 value is 0x0
- [ 0.427327] [ddrfreq] dram_tpr10 value is 0x0
- [ 0.427336] [ddrfreq] dram_tpr11 value is 0x0
- [ 0.427344] [ddrfreq] dram_tpr12 value is 168
- [ 0.427352] [ddrfreq] sunxi_ddrfreq_min=168000
- [ 0.427361] [ddrfreq] dram_tpr13 value is 0x10901
- [ 0.427495] [dsm] use sysconfig
- [ 0.427503] [dsm] -----------Dram scene-freq Table------------
- [ 0.427513] [dsm] scene = 0 frequency = 600000KHz
- [ 0.427522] [dsm] scene = 1 frequency = 360000KHz
- [ 0.427531] [dsm] scene = 2 frequency = 240000KHz
- [ 0.427539] [dsm] scene = 3 frequency = 168000KHz
- [ 0.427547] [dsm] --------------------------------------------
- [ 0.427678] [ddrfreq] LV_count value is 3
- [ 0.427699] [ddrfreq] ---------------Dram V-F Table---------------
- [ 0.427710] [ddrfreq] voltage = 1100mv frequency = 552000KHz
- [ 0.427719] [ddrfreq] voltage = 1100mv frequency = 360000KHz
- [ 0.427728] [ddrfreq] voltage = 1100mv frequency = 0KHz
- [ 0.427737] [ddrfreq] --------------------------------------------
- [ 0.427896] [ddrfreq] last_vdd=1100
- [ 0.427966] [ddrfreq] __sram_start: 0xc06c3000, __sram_end: 0xc06c4074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
- [ 0.427979] [ddrfreq] sunxi dramfreq probe ok!
- [ 0.428284] NET: Registered protocol family 2
- [ 0.439732] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.440321] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.440457] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
- [ 0.440592] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.440603] TCP: reno registered
- [ 0.440875] NET: Registered protocol family 1
- [ 0.441249] RPC: Registered named UNIX socket transport module.
- [ 0.441260] RPC: Registered udp transport module.
- [ 0.441268] RPC: Registered tcp transport module.
- [ 0.441277] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.441990] [pm]aw_pm_init!
- [ 0.442002] standby_mode = 1.
- [ 0.442011] wakeup src cnt is : 1.
- [ 0.442021] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
- [ 0.442032] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
- [ 0.442043] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
- [ 0.442055] sunxi_reg_init enter
- [ 0.442708] audit: initializing netlink socket (disabled)
- [ 0.442753] type=2000 audit(0.440:1): initialized
- [ 0.444775] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.444950] fuse init (API version 7.18)
- [ 0.445371] msgmni has been set to 489
- [ 0.445414] SELinux: Registering netfilter hooks
- [ 0.447024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.447042] io scheduler noop registered
- [ 0.447051] io scheduler deadline registered
- [ 0.447135] io scheduler cfq registered (default)
- [ 0.447165] pwm module init!
- [ 0.447709] sw_uart_get_devinfo()1428 - uart0 has no uart_regulator.
- [ 0.447726] sw_uart_get_devinfo()1428 - uart1 has no uart_regulator.
- [ 0.448106] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.448125] sw_console_setup()1188 - console setup baud 115200 parity n bits 8, flow n
- [ 0.448405] console [ttyS0] enabled
- [ 0.448733] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 0.452991] loop: module loaded
- [ 0.453291] [NAND]panic_buff_handle 0xc7708000 ,0x47708000
- [ 0.453308] [NAND][NAND]nand init start, nand0_used_flag is 1
- [ 0.453317] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
- [ 0.453330] regisger ISP =====================
- [ 0.453377] [NAND]nand init start
- [ 0.453387] NandHwInit: Start Nand Hardware initializing .....
- [ 0.453396] kernel:nand version: 3 5018 20181107 16671134
- [ 0.453417] [NAND] channel cnt is 1
- [ 0.453426] ndfc version: 1
- [ 0.453433] ndfc dma mode: MBUS DMA
- [ 0.453441] pin count:19
- [ 0.453550] NAND_ClkRequest: get pll6 rate 600000000HZ
- [ 0.453740] nand:get voltage axp22_dcdc1 ok:c66bfa80
- [ 0.453752] Reset NDFC 0
- [ 0.453762] NFC Randomizer start.
- [ 0.453784] NFC_ResetChip: 0x101, 0x100 0x10095
- [ 0.453793] NFC_ResetChip: 0xff, ch: 0
- [ 0.453861] [PHY_DBG] CH 0 Nand flash chip id is:0xec 0xdc 0x10 0x95 0x56 0xc6
- [ 0.453871] nand id of two channel is not the same, set to 1 channel mode
- [ 0.453883] [SCAN_DBG] Nand flash chip id is:0xec 0xdc 0x10 0x95 0x56 0xc6
- [ 0.453900] [SCAN_DBG] NandTwoPlaneOp: 1, DriverTwoPlaneOPCfg: 1, 0xfffffdbf
- [ 0.453912] nand_para0, id_number_ctl, nand type err! 0
- [ 0.453920] _UpdateExtAccessFreqPara: no para.
- [ 0.453930] NFC_ResetChip: 0x1000101, 0x100 0x10095
- [ 0.453939] NFC_ResetChip: 0xff, ch: 0
- [ 0.453977] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
- [ 0.453988] NFC_ResetChip: 0x2000109, 0x100 0x10095
- [ 0.453996] NFC_ResetChip: 0xff, ch: 0
- [ 0.454010] wrong Rb connect Mode, chip = 2 ,RbConnectMode = 1
- [ 0.454044] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
- [ 0.454055] NFC_ResetChip: 0x3000109, 0x100 0x10095
- [ 0.454063] NFC_ResetChip: 0xff, ch: 0
- [ 0.454077] wrong Rb connect Mode, chip = 3 ,RbConnectMode = 1
- [ 0.454110] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
- [ 0.454121] Reset NDFC 0
- [ 0.454131] PageCachePool.PageCache0: 0xc65f8000
- [ 0.454145] PageCachePool.PageCache1: 0xc66ee000
- [ 0.454157] PageCachePool.PageCache2: 0xc6692000
- [ 0.454169] PageCachePool.PageCache3: 0xc66e2000
- [ 0.454181] PageCachePool.PageCache4: 0xc66e4000
- [ 0.454190] PageCachePool.SpareCache: 0xc66372c0
- [ 0.454201] PageCachePool.TmpPageCache: 0xc66e6000
- [ 0.454213] PageCachePool.TmpPageCache1: 0xc66e8000
- [ 0.454224] PHY_ChangeMode: sclk0 will be changed! 10 -> 30
- [ 0.454236] PHY_ChangeMode: before check blank page, 0x101, 0x100, 0x10095, 0x21f
- [ 0.455014] _check_scan_data, it is a free page(type 1), block 4
- [ 0.455024] _check_scan_data, read error, block 4 !
- [ 0.455776] _check_scan_data, it is a free page(type 1), block 5
- [ 0.455785] _check_scan_data, read error, block 5 !
- [ 0.456536] _check_scan_data, it is a free page(type 1), block 6
- [ 0.456546] _check_scan_data, read error, block 6 !
- [ 0.457298] _check_scan_data, it is a free page(type 1), block 7
- [ 0.457308] _check_scan_data, read error, block 7 !
- [ 0.457647] _check_scan_data, ok, block 8
- [ 0.457655] _check_scan_data, valid data for ddr scan, block 8
- [ 0.457664] PHY_ChangeMode: valid burned data!
- [ 0.457673] PHY_ChangeMode: timing_change 1, sclk0_bak 10, sclk0 30!
- [ 0.457693] _get_right_timing_para, set edo to 1 for sdr nand.
- [ 0.457713] Physic_Info_Read start!!
- [ 0.457720] Physic_Info_Get_Offset start!!
- [ 0.459084] physic info start_block 4
- [ 0.459398] physic info start_block 5
- [ 0.459710] physic info start_block 6
- [ 0.460032] physic info start_block 7
- [ 0.460345] physic info start_block 8
- [ 0.460488] Physic_Info_Get_One_Copy start!!
- [ 0.461446] block 14 page 56
- [ 0.461589] block 14 page 57
- [ 0.461731] block 14 page 58
- [ 0.461873] block 14 page 59
- [ 0.462015] block 14 page 60
- [ 0.462157] block 14 page 61
- [ 0.462299] block 14 page 62
- [ 0.462441] block 14 page 63
- [ 0.462717] block 15 page 0
- [ 0.462859] block 15 page 1
- [ 0.463001] block 15 page 2
- [ 0.463143] block 15 page 3
- [ 0.463285] block 15 page 4
- [ 0.463430] block 15 page 5
- [ 0.463573] block 15 page 6
- [ 0.463715] block 15 page 7
- [ 0.463939] physic info copy is ok
- [ 0.463947] NandGetPhyInfoFlag !!!!
- [ 0.463955]
- [ 0.463957]
- [ 0.463964] [SCAN_DBG] ==============Nand Architecture Parameter==============
- [ 0.463975] [SCAN_DBG] Nand Chip ID: 0x9510dcec 0xffffff56
- [ 0.463984] [SCAN_DBG] Nand Channel Count: 0x1
- [ 0.463992] [SCAN_DBG] Nand Chip Count: 0x1
- [ 0.464000] [SCAN_DBG] Nand Chip Connect: 0x1
- [ 0.464008] [SCAN_DBG] Nand Rb Connect Mode: 0x1
- [ 0.464016] [SCAN_DBG] Sector Count Of Page: 0x4
- [ 0.464024] [SCAN_DBG] Page Count Of Block: 0x40
- [ 0.464032] [SCAN_DBG] Block Count Of Die: 0x1000
- [ 0.464040] [SCAN_DBG] Plane Count Of Die: 0x2
- [ 0.464048] [SCAN_DBG] Die Count Of Chip: 0x1
- [ 0.464056] [SCAN_DBG] Bank Count Of Chip: 0x1
- [ 0.464064] [SCAN_DBG] Optional Operation: 0x8c
- [ 0.464072] [SCAN_DBG] Access Frequency: 0x1e
- [ 0.464080] [SCAN_DBG] ECC Mode: 0x0
- [ 0.464088] [SCAN_DBG] Read Retry Type: 0x0
- [ 0.464096] [SCAN_DBG] DDR Type: 0x0
- [ 0.464104] [SCAN_DBG] =======================================================
- [ 0.464109]
- [ 0.464116] [SCAN_DBG] ==============Optional Operaion Parameter==============
- [ 0.464126] [SCAN_DBG] MultiPlaneReadCmd: 0x0, 0x30
- [ 0.464135] [SCAN_DBG] MultiPlaneWriteCmd: 0x11, 0x81
- [ 0.464144] [SCAN_DBG] MultiPlaneCopyReadCmd: 0x0, 0x0, 0x35
- [ 0.464154] [SCAN_DBG] MultiPlaneCopyWriteCmd: 0x85, 0x11, 0x81
- [ 0.464164] [SCAN_DBG] MultiPlaneStatusCmd: 0x70
- [ 0.464172] [SCAN_DBG] InterBnk0StatusCmd: 0xf1
- [ 0.464180] [SCAN_DBG] InterBnk1StatusCmd: 0xf2
- [ 0.464188] [SCAN_DBG] BadBlockFlagPosition: 0x1
- [ 0.464196] [SCAN_DBG] MultiPlaneBlockOffset: 0x1
- [ 0.464204] [SCAN_DBG] =======================================================
- [ 0.464215] kernel:nand info: 9510dcec ffffff56 8c 0 0
- [ 0.464240] nand_para0, sorting_flag, nand type err! 0
- [ 0.464249]
- [ 0.464254] [FORMAT_DBG] ===========Logical Architecture Parameter===========
- [ 0.464264] [FORMAT_DBG] Page Count of Logic Block: 0x40
- [ 0.464273] [FORMAT_DBG] Sector Count of Logic Page: 0x8
- [ 0.464281] [FORMAT_DBG] Block Count of Die: 0x800
- [ 0.464290] [FORMAT_DBG] Die Count: 0x1
- [ 0.464298] [FORMAT_DBG] ===================================================
- [ 0.464311] NandHwInit: End Nand Hardware initializing ..... OK!
- [ 0.464351] [ND]boot start
- [ 0.464366] [ND]partition->size :931840
- [ 0.464374] [ND]partition->cross_talk :0
- [ 0.464381] [ND]partition->attribute :0
- [ 0.464388] [ND]partition->start.Chip_NO :0
- [ 0.464396] [ND]partition->start.Block_NO :23
- [ 0.464403] [ND]partition->end.Chip_NO :0
- [ 0.464410] [ND]partition->end.Block_NO :2047
- [ 0.464419] [ND]partition->nand_disk[0].size :32768
- [ 0.464427] [ND]partition->nand_disk[0].type :0
- [ 0.464435] [ND]partition->nand_disk[1].size :16384
- [ 0.464444] [ND]partition->nand_disk[1].type :0
- [ 0.464452] [ND]partition->nand_disk[2].size :4096
- [ 0.464460] [ND]partition->nand_disk[2].type :0
- [ 0.464468] [ND]partition->nand_disk[3].size :16384
- [ 0.464476] [ND]partition->nand_disk[3].type :0
- [ 0.464485] [ND]partition->nand_disk[4].size :389120
- [ 0.464493] [ND]partition->nand_disk[4].type :0
- [ 0.464501] [ND]partition->nand_disk[5].size :360448
- [ 0.464510] [ND]partition->nand_disk[5].type :0
- [ 0.464518] [ND]partition->nand_disk[6].size :8192
- [ 0.464526] [ND]partition->nand_disk[6].type :0
- [ 0.464534] [ND]partition->nand_disk[7].size :104448
- [ 0.464543] [ND]partition->nand_disk[7].type :0
- [ 0.464551] [ND]partition->nand_disk[8].size :-1
- [ 0.464559] [ND]partition->nand_disk[8].type :-1
- [ 0.464567] [ND]partition->nand_disk[9].size :-1
- [ 0.464575] [ND]partition->nand_disk[9].type :-1
- [ 0.464583] [ND]partition->nand_disk[10].size :-1
- [ 0.464592] [ND]partition->nand_disk[10].type :-1
- [ 0.464600] [ND]partition->nand_disk[11].size :-1
- [ 0.464608] [ND]partition->nand_disk[11].type :-1
- [ 0.464616] [ND]partition->nand_disk[12].size :-1
- [ 0.464625] [ND]partition->nand_disk[12].type :-1
- [ 0.464633] [ND]partition->nand_disk[13].size :-1
- [ 0.464641] [ND]partition->nand_disk[13].type :-1
- [ 0.464649] [ND]partition->nand_disk[14].size :-1
- [ 0.464658] [ND]partition->nand_disk[14].type :-1
- [ 0.464666] [ND]partition->nand_disk[15].size :-1
- [ 0.464674] [ND]partition->nand_disk[15].type :-1
- [ 0.464682] [ND]partition->nand_disk[16].size :-1
- [ 0.464691] [ND]partition->nand_disk[16].type :-1
- [ 0.464699] [ND]partition->nand_disk[17].size :-1
- [ 0.464707] [ND]partition->nand_disk[17].type :-1
- [ 0.464716] [ND]partition->nand_disk[18].size :-1
- [ 0.464724] [ND]partition->nand_disk[18].type :-1
- [ 0.464732] [ND]partition->nand_disk[19].size :-1
- [ 0.464740] [ND]partition->nand_disk[19].type :-1
- [ 0.464749] [ND]partition->nand_disk[20].size :-1
- [ 0.464757] [ND]partition->nand_disk[20].type :-1
- [ 0.464765] [ND]partition->nand_disk[21].size :-1
- [ 0.464773] [ND]partition->nand_disk[21].type :-1
- [ 0.464782] [ND]partition->nand_disk[22].size :-1
- [ 0.464790] [ND]partition->nand_disk[22].type :-1
- [ 0.464798] [ND]partition->nand_disk[23].size :-1
- [ 0.464806] [ND]partition->nand_disk[23].type :-1
- [ 0.464819] [NE]partition_num: 0,size :0xe3800,cross_talk 0
- [ 0.464830] [NE]part mbr size: 0x8000 type: 0
- [ 0.464839] [NE]part boot-res size: 0x4000 type: 0
- [ 0.464848] [NE]part env size: 0x1000 type: 0
- [ 0.464856] [NE]part boot size: 0x4000 type: 0
- [ 0.464865] [NE]part rootfs size: 0x5f000 type: 0
- [ 0.464874] [NE]part rootfs_data size: 0x58000 type: 0
- [ 0.464883] [NE]part misc size: 0x2000 type: 0
- [ 0.464891] [NE]part UDISK size: 0x19800 type: 0
- [ 0.465004] [ND]factory bad block:0,1030 PartitionNO:0
- [ 0.465014] [ND]factory bad block:0,1031 PartitionNO:0
- [ 0.465113] [ND]factory bad block:0,2047 PartitionNO:0
- [ 0.465121] [ND]build 1 phy_partition !
- [ 0.465129] [ND]nand_info->type :0
- [ 0.465136] [ND]nand_info->SectorNumsPerPage :8
- [ 0.465144] [ND]nand_info->BytesUserData :16
- [ 0.465151] [ND]nand_info->PageNumsPerBlk :64
- [ 0.465159] [ND]nand_info->BlkPerChip :2048
- [ 0.465166] [ND]nand_info->FirstBuild :0
- [ 0.465173] [ND]nand_info->FullBitmap :1610612883
- [ 0.465181] [ND]nand_info->bad_block_addr.Chip_NO :0
- [ 0.465189] [ND]nand_info->bad_block_addr.Block_NO :0
- [ 0.465197] [ND]nand_info->mbr_block_addr.Chip_NO :0
- [ 0.465205] [ND]nand_info->mbr_block_addr.Block_NO :0
- [ 0.465213] [ND]nand_info->no_used_block_addr.Chip_NO :0
- [ 0.465222] [ND]nand_info->no_used_block_addr.Block_NO :23
- [ 0.465230] [ND]nand_info->new_bad_block_addr.Chip_NO :0
- [ 0.465238] [ND]nand_info->new_bad_block_addr.Block_NO :0
- [ 0.465247] [ND]nand_info->new_bad_page_addr :65535
- [ 0.465254] [ND]nand_info->partition_nums :1
- [ 0.465262] [ND]sizeof partition:2384
- [ 0.465269] [ND]nand_info->partition:0:
- [ 0.465276] [ND]size:0xe3800
- [ 0.465282] [ND]cross_talk:0x0
- [ 0.465289] [ND]attribute:0x0
- [ 0.465296] [ND]start: chip:0 block:23
- [ 0.465303] [ND]end : chip:0 block:2047
- [ 0.465311] check_phyisc start.
- [ 0.469632] uboot->sys_mode 0
- [ 0.469640] uboot->use_lsb_page 0
- [ 0.469646] uboot->copys 4
- [ 0.469653] uboot->uboot_len 901120
- [ 0.469660] uboot->total_len 933888
- [ 0.469667] uboot->uboot_pages 440
- [ 0.469674] uboot->total_pages 456
- [ 0.469681] uboot->blocks_per_total 8
- [ 0.469688] uboot->page_offset_for_nand_info 440
- [ 0.469695] uboot->uboot_block
- [ 0.469701] 8 16 24 32 0 0 0 0 0 0 0
- [ 0.469731] 0 0 0 0 0 0 0 0 0 0
- [ 0.469757] 0 0 0 0 0 0 0 0 0
- [ 0.520046] [LCD]open, step 1 finish
- [ 0.535454] nand_read_uboot_one ok 0
- [ 0.536736] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
- [ 0.536750] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
- [ 0.536776] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
- [ 0.601473] nand_read_uboot_one ok 1
- [ 0.623353] [LCD]open, step 2 finish
- [ 0.626688] ep952_open:454
- [ 0.626725] ep952_open:468
- [ 0.626821] [LCD]open, step 3 finish
- [ 0.626829] ep952_thread:303
- [ 0.667364] nand_read_uboot_one ok 2
- [ 0.728558] #####################
- [ 0.728567] # HDMI - Disconnect #
- [ 0.728581] #####################
- [ 0.730245] < EP952 Tx Power Down >
- [ 0.730253]
- [ 0.730256] State Transist: Power Down -> [TXS_Search_EDID]
- [ 0.733525] nand_read_uboot_one ok 3
- [ 0.733534] check_phyisc end.
- [ 0.733757] [NAND]nand_probe
- [ 0.733792] [NAND]nand type err!
- [ 0.733981] [ND]nand_partition0
- [ 0.734108] [ND]nftl start:2025,205
- [ 0.734373] [ND]first
- [ 1.001210] [ND]bad block: 1007
- [ 1.001218] [ND]bad block: 1008
- [ 1.071711] _ReadCheckSpare: filled invalid page(0,1297,0)...
- [ 1.073371] _ReadCheckSpare: filled invalid page(0,1304,0)...
- [ 1.075000] _ReadCheckSpare: filled invalid page(0,1311,0)...
- [ 1.076583] _ReadCheckSpare: filled invalid page(0,1318,0)...
- [ 1.078614] _ReadCheckSpare: filled invalid page(0,1327,0)...
- [ 1.080199] _ReadCheckSpare: filled invalid page(0,1334,0)...
- [ 1.080451] _ReadCheckSpare: filled invalid page(0,1335,0)...
- [ 1.084034] _ReadCheckSpare: filled invalid page(0,1351,0)...
- [ 1.084508] _ReadCheckSpare: filled invalid page(0,1353,0)...
- [ 1.084758] _ReadCheckSpare: filled invalid page(0,1354,0)...
- [ 1.085009] _ReadCheckSpare: filled invalid page(0,1355,0)...
- [ 1.092439] _ReadCheckSpare: filled invalid page(0,1388,0)...
- [ 1.092690] _ReadCheckSpare: filled invalid page(0,1389,0)...
- [ 1.092940] _ReadCheckSpare: filled invalid page(0,1390,0)...
- [ 1.104748] _ReadCheckSpare: filled invalid page(0,1443,0)...
- [ 1.239153] [ND]bad block: 2024
- [ 1.239162] [ND]before second 2022 1820.
- [ 1.443127] [NE]smart->version:aaaaaa01;
- [ 1.443139] [NE]smart->total_recv_read_sectors:338289;
- [ 1.443148] [NE]smart->total_recv_write_sectors:362595;
- [ 1.443156] [NE]smart->total_real_read_pages:45412;
- [ 1.443164] [NE]smart->total_real_write_pages:46416;
- [ 1.443172] [NE]smart->total_recv_discard_sectors:376832;
- [ 1.443180] [NE]smart->total_real_discard_sectors:376832;
- [ 1.443189] [NE]smart->total_recv_read_claim_pages:0;
- [ 1.443197] [NE]smart->total_gc_times:0;
- [ 1.443204] [NE]smart->total_gc_pages:0;
- [ 1.443211] [NE]smart->total_wl_times:0;
- [ 1.443219] [NE]smart->total_real_read_error_pages:0;
- [ 1.443227] [NE]smart->total_real_write_error_pages:0;
- [ 1.443235] [NE]smart->total_normal_power_cycles:d;
- [ 1.443243] [NE]smart->total_unusual_power_cycles:0;
- [ 1.443251] [NE]smart->max_block_erase_times:0;
- [ 1.443259] [NE]smart->min_block_erase_times:0;
- [ 1.443266] [NE]smart->max_block_used_counter:0;
- [ 1.443274] [NE]smart->min_block_used_counter:0;
- [ 1.443282] [NE]smart->read_reclaim_utc:0;
- [ 1.443289] [NE]smart->cross_talk_times:0;
- [ 1.484037] [NE]recover_phy_page_mapping no used page 36!!
- [ 1.484048] [ND]recover 1294 36
- [ 1.484062] [ND] nand3.5 version:0001 date:Jun 15 2019 06:37:52
- [ 1.484071] [ND]zone->nand_chip->blk_per_chip: 2025
- [ 1.484079] [ND]zone->nand_chip->bytes_per_page: 4096
- [ 1.484087] [ND]zone->nand_chip->pages_per_blk: 64
- [ 1.484095] [ND]zone->nand_chip->max_erase_times: 3000
- [ 1.484104] [ND]zone->nand_chip->support_read_reclaim: 43985
- [ 1.484112] [ND]zone->test: 0
- [ 1.484119] [ND]zone->zone_no: 0
- [ 1.484125] [ND]zone->zone_attr: 0
- [ 1.484132] [ND]zone->blocks: 2022
- [ 1.484139] [ND]zone->bad_block: 3
- [ 1.484146] [ND]zone->logic_cap_in_sects: 931840
- [ 1.484155] [ND]zone->backup_cap_in_sects: 103424
- [ 1.484162] [ND]zone->free_block_num: 1356
- [ 1.484170] [ND]zone->gc_strategy.start_gc_free_blocks: 40
- [ 1.484179] [ND]zone->gc_strategy.stop_gc_free_blocks: 134
- [ 1.484187] [ND]zone->gc_strategy.gc_page: 0
- [ 1.484195] [ND]zone->gc_strategy.process: 1
- [ 1.484203] [ND]zone->prio_gc.prio_type : 0
- [ 1.484211] [ND]zone->zone_start_phy_block->phy_block.Block_NO: 0
- [ 1.484220] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 2023
- [ 1.484230] [ND]zone->zone_phy_page_map_for_gc: c66da800
- [ 1.484238] [ND]zone->current_block.user_info: c666e000
- [ 1.484247] [ND]zone->current_block.block_info: c5c2b5f8
- [ 1.484256] [ND]zone->current_block.block_info->phy_block.Block_NO: 1294
- [ 1.484265] [ND]zone->current_block.page_used: 36
- [ 1.484273] [ND]zone->current_block.block_info->block_used_count: 732
- [ 1.484283] [ND]zone->read_reclaim_complete: 0
- [ 1.484291] [ND]zone->temp_page_buf: c66a1000
- [ 1.484298] [ND]zone->max_erase_num: 1
- [ 1.484306] [ND]zone->cache.cache_totals: 0
- [ 1.484313] [ND]zone->cfg->nftl_dont_use_cache: 0
- [ 1.484321] [ND]zone->cfg->nftl_use_cache_sort: 1
- [ 1.484329] [ND]zone->cfg->nftl_support_gc_read_reclaim: 1
- [ 1.484338] [ND]zone->cfg->nftl_support_wear_leveling: 1
- [ 1.484346] [ND]zone->cfg->nftl_need_erase: 0
- [ 1.484354] [ND]zone->cfg->nftl_min_free_block_num: 19
- [ 1.484363] [ND]zone->cfg->nftl_gc_threshold_free_block_num: 8
- [ 1.484371] [ND]zone->cfg->nftl_min_free_block: 4
- [ 1.484379] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
- [ 1.484388] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
- [ 1.484397] [ND]zone->cfg->nftl_max_cache_num: 20
- [ 1.484405] [ND]zone->cfg->nftl_max_cache_write_num: 1
- [ 1.484413] [ND]zone->cfg->nftl_cross_talk: 0
- [ 1.484421] [ND]zone->cfg->nftl_read_claim_interval: 1296000
- [ 1.484430] [NE]smart->version:aaaaaa01;
- [ 1.484437] [NE]smart->total_recv_read_sectors:338289;
- [ 1.484445] [NE]smart->total_recv_write_sectors:362595;
- [ 1.484454] [NE]smart->total_real_read_pages:45513;
- [ 1.484462] [NE]smart->total_real_write_pages:46416;
- [ 1.484470] [NE]smart->total_recv_discard_sectors:376832;
- [ 1.484478] [NE]smart->total_real_discard_sectors:376832;
- [ 1.484486] [NE]smart->total_recv_read_claim_pages:0;
- [ 1.484494] [NE]smart->total_gc_times:0;
- [ 1.484501] [NE]smart->total_gc_pages:0;
- [ 1.484508] [NE]smart->total_wl_times:0;
- [ 1.484515] [NE]smart->total_real_read_error_pages:0;
- [ 1.484524] [NE]smart->total_real_write_error_pages:0;
- [ 1.484532] [NE]smart->total_normal_power_cycles:d;
- [ 1.484539] [NE]smart->total_unusual_power_cycles:0;
- [ 1.484547] [NE]smart->max_block_erase_times:0;
- [ 1.484555] [NE]smart->min_block_erase_times:0;
- [ 1.484562] [NE]smart->max_block_used_counter:0;
- [ 1.484570] [NE]smart->min_block_used_counter:0;
- [ 1.484577] [NE]smart->read_reclaim_utc:0;
- [ 1.484585] [NE]smart->cross_talk_times:0;
- [ 1.484591] [ND]nftl ok!
- [ 1.484599] [ND] panic block 1287!
- [ 1.484606] [ND] panic block 1280!
- [ 1.484612] [ND] panic block 1273!
- [ 1.484701] [ND]max_erase_times = 20000
- [ 1.484818] [NAND]nand_dev add mbr
- [ 1.484827] [NAND]nand_dev add boot-res
- [ 1.485809] nanda:
- [ 1.486017] [NAND]nand_dev add env
- [ 1.486719] nandb: unknown partition table
- [ 1.486907] [NAND]nand_dev add boot
- [ 1.487484] nandc:
- [ 1.487652] [NAND]nand_dev add rootfs
- [ 1.488220] nandd: unknown partition table
- [ 1.488383] [NAND]nand_dev add rootfs_data
- [ 1.488941] nande: unknown partition table
- [ 1.489106] [NAND]nand_dev add misc
- [ 1.489672] nandf: unknown partition table
- [ 1.489838] [NAND]nand_dev add UDISK
- [ 1.490153] nandg: unknown partition table
- [ 1.490413] [NAND]nand init end
- [ 1.490631] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
- [ 1.490646] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
- [ 1.490678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.490767] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc06fa6c4
- [ 1.490785] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
- [ 1.510814] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
- [ 1.510831] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.510864] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 1.511547] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 1.520027] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 1.520057] ehci_irq: highspeed device connect
- [ 1.520699] usb usb1: hdev->level=0
- [ 1.520709] hub 1-0:1.0: USB hub found
- [ 1.520733] hub 1-0:1.0: 1 port detected
- [ 1.521116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.521185] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc06fa7c8
- [ 1.521201] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
- [ 1.541229] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.541259] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
- [ 1.541295] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 1.597924] usb usb2: hdev->level=0
- [ 1.597934] hub 2-0:1.0: USB hub found
- [ 1.597953] hub 2-0:1.0: 1 port detected
- [ 1.598344] get serial_unique failed
- [ 1.598539] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
- [ 1.598555] [sw_udc]: alloc request: ep(0xc06a3668, ep0, 64), req(0xc5c1f540)
- [ 1.598573] [sw_udc]: sunxi_udc_pullup, is_on = 0
- [ 1.598586] [sw_udc]: usbd_stop_work
- [ 1.598683] file system registered
- [ 1.599739] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.599752] android_usb gadget: Number of LUNs=3
- [ 1.599764] lun0: LUN: removable file: (no medium)
- [ 1.599774] lun1: LUN: removable file: (no medium)
- [ 1.599784] lun2: LUN: removable file: (no medium)
- [ 1.600168] android_usb gadget: android_usb ready
- [ 1.600192] [sw_hcd0]: usb host driver initialize........
- [ 1.600569] mousedev: PS/2 mouse device common for all mice
- [ 1.600975] input: sunxi-keyboard as /devices/virtual/input/input1
- [ 1.601264] [RTC] WARNING: Rtc time will be wrong!!
- [ 1.601490] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
- [ 1.601536] i2c /dev entries driver
- [ 1.601919] sunxi cedar version 0.1
- [ 1.601970] [cedar]: install start!!!
- [ 1.602146] [cedar]: install end!!!
- [ 1.604875] axp22_dcdc1: Failed to create debugfs directory
- [ 1.606360] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.606707] autohotplug_init init ok
- [ 1.606743] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
- [ 1.606759] cur: pll=1008000000, cpudiv=1, axidiv=3
- [ 1.606784] axp22_dcdc3: Failed to create debugfs directory
- [ 1.606809] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 120MHz
- [ 1.606851] -------------------CPU V-F Table--------------------
- [ 1.606861] frequency = 1536000KHz voltage = 1500mv
- [ 1.606869] frequency = 1344000KHz voltage = 1460mv
- [ 1.606878] frequency = 1200000KHz voltage = 1320mv
- [ 1.606887] frequency = 1008000KHz voltage = 1200mv
- [ 1.606896] frequency = 816000KHz voltage = 1100mv
- [ 1.606905] frequency = 648000KHz voltage = 1040mv
- [ 1.606914] frequency = 0KHz voltage = 1040mv
- [ 1.606922] frequency = 0KHz voltage = 1040mv
- [ 1.606930] -----------------------------------------------------
- [ 1.607148] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.120 2016-08-3 10:59) Compiled in Jun 15 2019 at 06:38:06
- [ 1.607177] [mmc]: MMC host used card: 0x0, boot card: 0x0, io_card 0
- [ 1.607274] [led]:sunxi_led_init begin!
- [ 1.607294] led1 gpio number is 39
- [ 1.607303] led1_trigger gpio number is none
- [ 1.607314] led2 gpio number is 33
- [ 1.607324] led2_trigger gpio number is none
- [ 1.607616] Registered led device: led1
- [ 1.607722] Registered led device: led2
- [ 1.608528] usbcore: registered new interface driver usbhid
- [ 1.608538] usbhid: USB HID core driver
- [ 1.609088] ashmem: initialized
- [ 1.609208] logger: created 256K log 'log_main'
- [ 1.609322] logger: created 256K log 'log_events'
- [ 1.609451] logger: created 256K log 'log_radio'
- [ 1.609569] logger: created 256K log 'log_system'
- [ 1.609782] Linux telephony interface: v1.00
- [ 1.610115] usbcore: registered new interface driver snd-usb-audio
- [ 1.614613] asoc: sndi2s0 <-> i2s0 mapping ok
- [ 1.616022] [ audio ] err:try to get audio_pa_ctrl failed!
- [ 1.616044] sunxi-pcm-codec: probe of sunxi-pcm-codec failed with error -14
- [ 1.616618] input: headset as /devices/virtual/input/input2
- [ 1.617091] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
- [ 1.617316] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
- [ 1.617329] I2S1 driver not init,just return.
- [ 1.617494] u32 classifier
- [ 1.617502] Actions configured
- [ 1.617513] Netfilter messages via NETLINK v0.30.
- [ 1.617591] nf_conntrack version 0.5.0 (3919 buckets, 15676 max)
- [ 1.618016] ctnetlink v0.93: registering with nfnetlink.
- [ 1.618075] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.618085] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.618297] xt_time: kernel timezone is -0000
- [ 1.618470] IPv4 over IPv4 tunneling driver
- [ 1.618937] gre: GRE over IPv4 demultiplexor driver
- [ 1.618949] ip_gre: GRE over IPv4 tunneling driver
- [ 1.619613] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.619807] arp_tables: (C) 2002 David S. Miller
- [ 1.619870] TCP: cubic registered
- [ 1.619880] Initializing XFRM netlink socket
- [ 1.620310] NET: Registered protocol family 10
- [ 1.621499] Mobile IPv6
- [ 1.621536] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.621724] IPv6 over IPv4 tunneling driver
- [ 1.622857] NET: Registered protocol family 17
- [ 1.622890] NET: Registered protocol family 15
- [ 1.622905] L2TP core driver, V2.0
- [ 1.622912] L2TP IP encapsulation support (L2TPv3)
- [ 1.622982] L2TP netlink interface
- [ 1.623012] L2TP ethernet pseudowire support (L2TPv3)
- [ 1.623556] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 1.623579] ThumbEE CPU extension supported.
- [ 1.623600] Registering SWP/SWPB emulation handler
- [ 1.624389] axp22_dc5ldo: incomplete constraints, leaving on
- [ 1.624490] axp22_eldo2: incomplete constraints, leaving on
- [ 1.624544] axp22_eldo1: incomplete constraints, leaving on
- [ 1.624729] axp22_dldo1: incomplete constraints, leaving on
- [ 1.624784] axp22_aldo3: incomplete constraints, leaving on
- [ 1.624837] axp22_aldo2: incomplete constraints, leaving on
- [ 1.624891] axp22_aldo1: incomplete constraints, leaving on
- [ 1.624945] axp22_rtc: incomplete constraints, leaving on
- [ 1.624999] axp22_dcdc5: incomplete constraints, leaving on
- [ 1.625097] axp22_dcdc3: incomplete constraints, leaving on
- [ 1.625150] axp22_dcdc2: incomplete constraints, leaving on
- [ 1.625288] otg_wakelock_init: No USB transceiver found
- [ 1.625926] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
- [ 1.626327] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
- [ 1.626375] ths_fetch_sysconfig_para: type err device_used = 1.
- [ 1.626606] input: sunxi-ths as /devices/virtual/input/input4
- [ 1.626989] suxi_ths: Kernel Thermal management registered
- [ 1.627012] fetch C0_LV_count from sysconfig failed
- [ 1.627377] sunxi_ths_bind : thermal-budget-0
- [ 1.627390] ths_zone trip = 75, adjust lower = 0, upper = 1
- [ 1.627421] ths_zone trip = 90, adjust lower = 1, upper = 3
- [ 1.627442] CPU Budget:Register notifier
- [ 1.627453] CPU Budget:register Success
- [ 1.627464] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 1.631259] ALSA device list:
- [ 1.631272] #0: sndi2s0
- [ 1.634395] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.634459] VFS: Mounted root (ext4 filesystem) on device 93:24.
- [ 1.635577] devtmpfs: mounted
- [ 1.635953] Freeing init memory: 196K
- [ 1.802455] [ND]flush cache 1 0!
- [ 1.808166] EXT4-fs (nandd): re-mounted. Opts: errors=remount-ro,data=ordered
- [ 1.826745] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
- [ 1.889027] [ND]flush cache 1 0!
- [ 1.951872] usb 1-1: hdev->level=1
- [ 1.951890] hub 1-1:1.0: USB hub found
- [ 1.952090] hub 1-1:1.0: 4 ports detected
- [ 2.013143] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.020924] EXT4-fs (nandf): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.032812] [ND]flush cache 1 0!
- [ 2.045067] [ND]flush cache 1 0!
- [ 2.045920] [ND]flush cache 1 0!
- [ 2.048255] EXT4-fs (nandd): re-mounted. Opts: errors=remount-ro,data=ordered
- [ 2.058770] [ND]flush cache 1 0!
- [ 2.174895] udevd[117]: starting version 3.1.5
- [ 2.216745] usb 1-1.4: new high-speed USB device number 3 using sunxi-ehci
- [ 2.273413] ====codec_init_events===
- [ 2.553427] vmalloc: allocation failure: 0 bytes
- [ 2.553446] modprobe: page allocation failure: order:0, mode:0xd0
- [ 2.555060] Get mali parameter successfully
- [ 2.555101] Init Mali gpu successfully
- [ 2.556464] Mali: Mali device driver loaded
- [ 2.672744] EXT4-fs (nandf): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.553619] [ND]flush cache 1 0!
- [ 6.554593] [ND]flush cache 1 0!
- [ 6.556503] [ND]flush cache 1 0!
- [ 12.347504] [ND]flush cache 1 0!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement