Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- --------- beginning of /dev/alog/main
- D/PrintK ( 0): <6>Initializing cgroup subsys cpu
- I/PrintK ( 0): <5>Linux version 2.6.36.3-g19e9bf5-dirty (giveen@giveen-MS-7641) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Tue Feb 26 12:45:30 MST 2013
- W/PrintK ( 0): CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f
- W/PrintK ( 0): CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- W/PrintK ( 0): Machine: Streak7
- W/PrintK ( 0): <4>Ignoring unrecognised tag 0x54410009
- D/PrintK ( 0): <6>Tegra reserved memory:
- D/PrintK ( 0): LP0: 1fa5f000 - 1fa60fff
- D/PrintK ( 0): Bootloader framebuffer: 00000000 - ffffffff
- D/PrintK ( 0): Framebuffer: 17800000 - 179fffff
- D/PrintK ( 0): 2nd Framebuffer: 17a00000 - 17bfffff
- D/PrintK ( 0): Carveout: 17c00000 - 1fbfffff
- W/PrintK ( 0): Memory policy: ECC disabled, Data cache writealloc
- V/PrintK ( 0): <7>On node 0 totalpages: 96256
- V/PrintK ( 0): <7>free_area_init_node: node 0, pgdat c0695de0, node_mem_map c08ba000
- V/PrintK ( 0): <7> Normal zone: 776 pages used for memmap
- V/PrintK ( 0): <7> Normal zone: 0 pages reserved
- V/PrintK ( 0): <7> Normal zone: 95480 pages, LIFO batch:31
- W/PrintK ( 0): <4> HighMem zone: 240 pages exceeds realsize 0
- D/PrintK ( 0): <6>PERCPU: Embedded 7 pages/cpu @c0cb7000 s7264 r8192 d13216 u65536
- D/PrintK ( 0): <6>pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096
- V/PrintK ( 0):
- D/PrintK ( 0): <6>pcpu-alloc:
- V/PrintK ( 0): [0]
- V/PrintK ( 0): 0
- V/PrintK ( 0): [0]
- V/PrintK ( 0): 1
- V/PrintK ( 0):
- W/PrintK ( 0): Built 1 zonelists in Zone order, mobility grouping on. Total pages: 95480
- I/PrintK ( 0): <5>Kernel command line: nvmem=64M@444M mem=508M@0M vmalloc=508M video=tegrafb usbcore.old_scheme_first=1 lp0_vec=8192@0x1fa5f000 tegraboot=sdmmc board_info=0:0:0:0:0 OemBoardId=EVT3-1 -b androidboot.bootloader=EVT3-1-b mbr_offset_lba=32768 console=none androidboot.serialno=027c100941c0a4d7 rf_test=0
- D/PrintK ( 0): <6>board info: Id:0 0 SKU:0 Fab:0 Rev:
- W/PrintK ( 0): <4>force_mbr_offset_lba_fn: force_mbr_offset_lba=32768
- D/PrintK ( 0): <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
- D/PrintK ( 0): <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- D/PrintK ( 0): <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- D/PrintK ( 0): <6>Memory:
- V/PrintK ( 0): 376MB
- V/PrintK ( 0): = 376MB total
- I/PrintK ( 0): <5>Memory: 371320k/371320k available, 148872k reserved, 0K highmem
- I/PrintK ( 0): <5>Virtual kernel memory layout:
- I/PrintK ( 0): vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- I/PrintK ( 0): fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- I/PrintK ( 0): DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- I/PrintK ( 0): vmalloc : 0xd8800000 - 0xf8000000 ( 504 MB)
- I/PrintK ( 0): lowmem : 0xc0000000 - 0xd8400000 ( 388 MB)
- I/PrintK ( 0): pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- I/PrintK ( 0): modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- I/PrintK ( 0): .init : 0xc0008000 - 0xc0037000 ( 188 kB)
- I/PrintK ( 0): .text : 0xc0037000 - 0xc060f000 (5984 kB)
- I/PrintK ( 0): .data : 0xc0638000 - 0xc06968a0 ( 379 kB)
- D/PrintK ( 0): <6>Hierarchical RCU implementation.
- D/PrintK ( 0): <6> RCU dyntick-idle grace-period acceleration is enabled.
- D/PrintK ( 0): <6> RCU-based detection of stalled CPUs is disabled.
- D/PrintK ( 0): <6> Verbose stalled-CPUs detection is disabled.
- D/PrintK ( 0): <6>NR_IRQS:448
- D/PrintK ( 0): <6>Calibrating delay loop...
- V/PrintK ( 0): <c>598.01 BogoMIPS (lpj=2990080)
- D/PrintK ( 0): <6>pid_max: default: 32768 minimum: 301
- W/PrintK ( 0): Mount-cache hash table entries: 512
- D/PrintK ( 0): <6>Initializing cgroup subsys debug
- D/PrintK ( 0): <6>Initializing cgroup subsys cpuacct
- D/PrintK ( 0): <6>Initializing cgroup subsys freezer
- D/PrintK ( 0): <6>Initializing cgroup subsys bfqio
- D/PrintK ( 0): <6>CPU: Testing write buffer coherency:
- V/PrintK ( 0): ok
- D/PrintK ( 1): <6>Calibrating local timer...
- V/PrintK ( 1): 74.94MHz, setting to
- V/PrintK ( 1): 2.50MHz.
- W/PrintK ( 0): CPU1: Booted secondary processor
- D/PrintK ( 1): <6>Brought up 2 CPUs
- D/PrintK ( 1): <6>SMP: Total of 2 processors activated (1196.03 BogoMIPS).
- D/PrintK ( 1): <6>regulator: core version 0.5
- D/PrintK ( 1): <6>regulator: dummy:
- D/PrintK ( 1): <6>NET: Registered protocol family 16
- D/PrintK ( 1): <6>host1x bus init
- D/PrintK ( 1): <6>Tegra SKU: 8 Rev: A03 CPU Process: 1 Core Process: 2 Speedo ID: 1
- D/PrintK ( 1): <6>Tegra Revision: A03 prime SKU: 0x8 CPU Process: 1 Core Process: 2
- E/PrintK ( 1): <3>tegra2_init_sku_limits: Unknown sku clock avp.sclk
- E/PrintK ( 1): <3>tegra2_init_sku_limits: Unknown sku clock bsea.sclk
- W/PrintK ( 1): Entry WLAN ALLOC STATIC MEM
- F/PrintK ( 1): <2>dhd_port=0xd7084000,bus_rxbuf=0xd7088000,bus_databuf=0xd7090000
- W/PrintK ( 1): ventana_touch_init_atmel 853
- W/PrintK ( 1): ventana_capkey_init 885
- W/PrintK ( 1): tegra_keypad_init 730
- D/PrintK ( 1): <6>ventana_datacards_init()
- D/PrintK ( 1): <6>tegra_arb_init: initialized
- D/PrintK ( 1): <6>tegra_iovmm_register: added iovmm-gart
- W/PrintK ( 1): bio: create slab <bio-0> at 0
- I/PrintK ( 1): <5>SCSI subsystem initialized
- D/PrintK ( 1): <6>tegra-otg tegra-otg: d7029ee0
- D/PrintK ( 1): <6>usbcore: registered new interface driver usbfs
- D/PrintK ( 1): <6>usbcore: registered new interface driver hub
- D/PrintK ( 1): <6>usbcore: registered new device driver usb
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe+, id=0, nr=0
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe-
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe+, id=1, nr=1
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe-
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe+, id=2, nr=3
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe-
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe+, id=3, nr=4
- D/PrintK ( 1): <6>tps6586x 4-0034: d7029d80
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-SM_0
- D/PrintK ( 1): <6>regulator: REG-SM_0: 725 <--> 1500 mV at 1275 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-SM_1
- D/PrintK ( 1): <6>regulator: REG-SM_1: 725 <--> 1500 mV at 750 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_ldo_set_voltage, REG-LDO_0 2850~2850
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_0
- D/PrintK ( 1): <6>regulator: REG-LDO_0: 2850 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_ldo_set_voltage, REG-LDO_1 1100~1100
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_1
- D/PrintK ( 1): <6>regulator: REG-LDO_1: 1100 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-LDO_2: 725 <--> 1500 mV at 1275 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-LDO_3: 1250 <--> 3300 mV at 2850 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_4
- D/PrintK ( 1): <6>regulator: REG-LDO_4: 1800 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_5
- D/PrintK ( 1): <6>regulator: REG-LDO_5: 2850 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_6
- D/PrintK ( 1): <6>regulator: REG-LDO_6: 2850 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-LDO_7: 3300 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-LDO_8: 1800 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_ldo_set_voltage, REG-LDO_9 2850~2850
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_9
- D/PrintK ( 1): <6>regulator: REG-LDO_9: 2850 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-GPIO_1: 1500 mV normal standby
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_preinit, 3V3_CAPCHG request Pass
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_preinit, 3V3_CAPCHG output 0, Pass
- D/PrintK ( 1): <6>regulator: REG-GPIO_2: 3300 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-GPIO_3: 5000 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-GPIO_4: 1200 mV normal standby
- D/PrintK ( 1): <6>regulator: REG-LED_PWM: 5000 mV normal standby
- D/PrintK ( 1): <6>[I2C]tegra_i2c_probe-
- D/PrintK ( 1): <6>Advanced Linux Sound Architecture Driver Version 1.0.23.
- D/PrintK ( 1): <6>Bluetooth: Core ver 2.15
- D/PrintK ( 1): <6>NET: Registered protocol family 31
- D/PrintK ( 1): <6>Bluetooth: HCI device and connection manager initialized
- D/PrintK ( 1): <6>Bluetooth: HCI socket layer initialized
- D/PrintK ( 1): <6>NET: Registered protocol family 8
- D/PrintK ( 1): <6>NET: Registered protocol family 20
- D/PrintK ( 1): <6>Switching to clocksource timer_us
- D/PrintK ( 1): <6>tegra-nvmap tegra-nvmap: d7029eb0
- D/PrintK ( 1): <6>tegra-nvmap tegra-nvmap: d7029eb0
- D/PrintK ( 1): <6>NET: Registered protocol family 2
- D/PrintK ( 1): <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- D/PrintK ( 1): <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- D/PrintK ( 1): <6>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- D/PrintK ( 1): <6>TCP: Hash tables configured (established 16384 bind 16384)
- D/PrintK ( 1): <6>TCP reno registered
- D/PrintK ( 1): <6>UDP hash table entries: 256 (order: 1, 8192 bytes)
- D/PrintK ( 1): <6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- D/PrintK ( 1): <6>NET: Registered protocol family 1
- D/PrintK ( 1): <6>Unpacking initramfs...
- D/PrintK ( 1): <6>Freeing initrd memory: 220K
- D/PrintK ( 1): <6>PMU: registered new PMU device of type 0
- D/PrintK ( 1): <6>BootLog, +ftm_init
- D/PrintK ( 1): <6>ftm_init platform_driver_register ret: 0
- D/PrintK ( 1): <6>ftm_init sysdev_class_register ret: 0
- D/PrintK ( 1): <6>ftm_init sysdev_register ret: 0
- D/PrintK ( 1): <6>ftm_init sysdev_create_file ret: 0
- D/PrintK ( 1): <6>BootLog, -ftm_init, ret=0
- D/PrintK ( 1): <6>ashmem: initialized
- I/PrintK ( 1): <5>VFS: Disk quotas dquot_6.5.2
- W/PrintK ( 1): Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- D/PrintK ( 1): <6>NTFS driver 2.1.29 [Flags: R/W].
- D/PrintK ( 1): <6>fuse init (API version 7.15)
- D/PrintK ( 1): <6>io scheduler noop registered
- D/PrintK ( 1): <6>io scheduler deadline registered
- D/PrintK ( 1): <6>io scheduler cfq registered
- D/PrintK ( 1): <6>io scheduler sio registered (default)
- D/PrintK ( 1): <6>io scheduler bfq registered
- D/PrintK ( 1): <6>io scheduler vr registered
- W/PrintK ( 1): [BKL]Backlight ON (10588)
- D/PrintK ( 1): <6>tegra_grhost tegra_grhost: d7029eb8
- D/PrintK ( 1): <6>tegradc tegradc.0: d7029ec0
- D/PrintK ( 1): <6>tegradc tegradc.0: d7029e88
- D/PrintK ( 1): <6>tegradc tegradc.1: d7029ec0
- D/PrintK ( 1): <6>tegradc tegradc.1: d7029e88
- D/PrintK ( 1): <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- D/PrintK ( 1): <6>tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
- D/PrintK ( 1): <6>Registered UART port ttyHS2
- D/PrintK ( 1): <6>tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
- D/PrintK ( 1): <6>Registered UART port ttyHS3
- D/PrintK ( 1): <6>Initialized tegra uart driver
- D/PrintK ( 1): <6>loop: module loaded
- W/PrintK ( 1): BootLog, +sensors_daemon_init+
- D/PrintK ( 1): <6>input: sensors_daemon as /devices/virtual/input/input0
- W/PrintK ( 1): BootLog, -sensors_daemon_init-, ret=0
- W/PrintK ( 1): BootLog, +current_driving_init+
- W/PrintK ( 1): BootLog, -current_driving_init-, ret=0
- D/PrintK ( 1): <6>nct1008 3-004c: d7029eb8
- D/PrintK ( 1): <6>bonding: Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010)
- W/PrintK ( 1): <4>bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
- D/PrintK ( 1): <6>PPP generic driver version 2.4.2
- D/PrintK ( 1): <6>PPP Deflate Compression module registered
- D/PrintK ( 1): <6>PPP BSD Compression module registered
- D/PrintK ( 1): <6>PPP MPPE Compression module registered
- D/PrintK ( 1): <6>NET: Registered protocol family 24
- D/PrintK ( 1): <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
- D/PrintK ( 1): <6>CSLIP: code copyright 1989 Regents of the University of California.
- D/PrintK ( 1): <6>SLIP linefill/keepalive option.
- D/PrintK ( 1): <6>tun: Universal TUN/TAP device driver, 1.6
- D/PrintK ( 1): <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- D/PrintK ( 1): <6>usbcore: registered new interface driver asix
- D/PrintK ( 1): <6>usbcore: registered new interface driver cdc_ether
- D/PrintK ( 1): <6>usbcore: registered new interface driver CDC NCM device
- D/PrintK ( 1): <6>usbcore: registered new interface driver cdc_subset
- D/PrintK ( 1): <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- V/PrintK ( 1): <7>ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
- D/PrintK ( 1): <6>tegra-ehci tegra-ehci.2: d7029e90
- V/PrintK ( 1): <7>/home/giveen/ubuntu_tablet/kernel/dell/streak7/drivers/usb/core/inode.c: creating file 'devices'
- V/PrintK ( 1): <7>/home/giveen/ubuntu_tablet/kernel/dell/streak7/drivers/usb/core/inode.c: creating file '001'
- D/PrintK ( 1): <6>tegra-ehci tegra-ehci.2: d7029e90
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029e10
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029e10
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029da8
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029e10
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029e10
- D/PrintK ( 1): <6>tegra-ehci tegra-ehci.2: d7029e90
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029da0
- V/PrintK ( 1): <7>tegra-ehci tegra-ehci.2: d7029e08
- D/PrintK ( 1): <6>tegra-ehci tegra-ehci.2: d7029e08
- V/PrintK ( 1): <7>usb usb1: d7029e30
- V/PrintK ( 1): <7>usb usb1: d7029e78
- D/PrintK ( 1): <6>usb usb1: d7029e78
- D/PrintK ( 1): <6>usb usb1: d7029e78
- D/PrintK ( 1): <6>usb usb1: d7029e78
- D/PrintK ( 1): <6>usb usb1: d7029e78
- D/PrintK ( 1): <6>usb usb1: d7029e78
- V/PrintK ( 1): <7>usb usb1: d7029dd8
- V/PrintK ( 1): <7>usb usb1: d7029da8
- V/PrintK ( 1): <7>usb usb1: d7029d68
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029cb8
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029cb8
- D/PrintK ( 1): <6>hub 1-0:1.0: d7029c48
- D/PrintK ( 1): <6>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029c48
- V/PrintK ( 1): <7>hub 1-0:1.0: d7029bf8
- V/PrintK ( 1): <7>/home/giveen/ubuntu_tablet/kernel/dell/streak7/drivers/usb/core/inode.c: creating file '001'
- D/PrintK ( 1): <6>usbcore: registered new interface driver cdc_acm
- D/PrintK ( 1): <6>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- D/PrintK ( 1): <6>usbcore: registered new interface driver cdc_wdm
- D/PrintK ( 1): <6>Initializing USB Mass Storage driver...
- D/PrintK ( 1): <6>usbcore: registered new interface driver usb-storage
- D/PrintK ( 1): <6>USB Mass Storage support registered.
- D/PrintK ( 1): <6>usbcore: registered new interface driver libusual
- D/PrintK ( 1): <6>usbcore: registered new interface driver usbserial
- D/PrintK ( 1): <6>USB Serial support registered for generic
- D/PrintK ( 1): <6>usbcore: registered new interface driver usbserial_generic
- D/PrintK ( 1): <6>usbserial: USB Serial Driver core
- D/PrintK ( 1): <6>USB Serial support registered for GSM modem (1-port)
- D/PrintK ( 1): <6>usbcore: registered new interface driver option
- D/PrintK ( 1): <6>option: v0.7.2:USB Driver for GSM modems
- D/PrintK ( 1): <6>USB Serial support registered for pl2303
- D/PrintK ( 1): <6>usbcore: registered new interface driver pl2303
- D/PrintK ( 1): <6>pl2303: Prolific PL2303 USB to serial adaptor driver
- D/PrintK ( 1): <6>oob_wake_init: initializing oob-wake
- D/PrintK ( 1): <6>NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
- D/PrintK ( 1): <6>BootLog +udc_init+, NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
- D/PrintK ( 1): <6>android_usb gadget: d7029ef8
- D/PrintK ( 1): <6>android_usb gadget: d7029ef8
- D/PrintK ( 1): <6> lun0: d7029ef8
- W/PrintK ( 1): <4>Gadget Android: controller 'fsl-tegra-udc' not recognized
- D/PrintK ( 1): <6>android_usb gadget: d7029f60
- D/PrintK ( 1): <6>fsl-tegra-udc: bind to driver android_usb
- W/PrintK ( 1): system_rev=0x9 A02=0
- V/PrintK ( 16): <7>hub 1-0:1.0: d70bbf08
- V/PrintK ( 1): turn on capkey LED light
- D/PrintK ( 1): <6>input: ATA2538_capkey as /devices/virtual/input/input1
- W/PrintK ( 1): system_rev=0x9 WIFI=0
- W/PrintK ( 1): config SAR_PWR gpio[202] : output high
- D/PrintK ( 1): <6>input: tegra_keypad_key as /devices/virtual/input/input2
- W/PrintK ( 1): Luna Touch IMG ver. 20100429 09:53 AM
- W/PrintK ( 1): touchpad_poweron_device 1062 avdd_touch & vdd_touch have been turn on
- W/PrintK ( 1): INFO_LEVEL:touchpad_probe: get gpio_num 67 pinvalue 0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- V/PrintK ( 1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- V/PrintK ( 1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- V/PrintK ( 1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- V/PrintK ( 1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- E/PrintK ( 0): <3>tegra-i2c tegra-i2c.2: c0639ea0
- V/PrintK ( 1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
- W/PrintK ( 1): INFO_LEVEL:read 0h 1 bytes retry at 5
- W/PrintK ( 1): touch ic is NOT in bl mode
- W/PrintK ( 1): ATMEL touch firmware version : 0x20
- D/PrintK ( 1): <6>input: mXT224_touchscreen as /devices/virtual/input/input3
- W/PrintK ( 1): touchpad_probe tp init done
- W/PrintK ( 1): tp_cable_state restore T28 & T9
- D/PrintK ( 1): <6>using rtc device, tps6586x-rtc, for alarms
- D/PrintK ( 1): <6>tps6586x-rtc tps6586x-rtc.0: d7029eb0
- D/PrintK ( 1): <6>i2c /dev entries driver
- W/PrintK ( 1): BootLog, +gsensor_init+
- W/PrintK ( 1): BootLog, -gsensor_init-, ret=0
- W/PrintK ( 1): BootLog, +ecompass_init+
- W/PrintK ( 1): BootLog, -ecompass_init-, ret=0
- W/PrintK ( 1): BootLog, +lsensor_probe
- D/PrintK ( 1): <6>[ALS]lsensor_i2c3_probe+
- D/PrintK ( 1): <6>[ALS]lsensor_i2c3_probe-
- D/PrintK ( 1): <6>[ALS]lsensor_probe, lsensor_i2c3 add Pass
- D/PrintK ( 1): <6>[ALS]lsensor_probe, wait i2c probe, Pass
- D/PrintK ( 1): <6>[ALS]Reg00_07 = 00 6C 50 00 00 - FF FF 02
- D/PrintK ( 1): <6>[ALS]Reg12_19 = 93 04 00 00 00 - 00 00 6C
- D/PrintK ( 1): <6>[ALS]lsensor_probe, Lsensor init Pass!
- D/PrintK ( 1): <6>[ALS]lsensor_probe, INTR=i/p 1
- D/PrintK ( 1): <6>[ALS]lsensor_probe luna_lsensor_workqueue created PASS!
- D/PrintK ( 1): <6>[ALS]create /sys/devices/virtual/misc/lsensor_taos/ctrl
- D/PrintK ( 1): <6>[ALS]input_allocate_device: PASS
- D/PrintK ( 1): <6>input: lsensor_taos as /devices/virtual/input/input4
- D/PrintK ( 1): <6>[ALS]input_register_device: PASS
- W/PrintK ( 1): BootLog, -lsensor_probe, ret=0
- W/PrintK ( 1): BootLog, +luna_vib_init
- D/PrintK ( 1): <6>[VIB]luna_vib_probe+
- D/PrintK ( 1): <6>[VIB]luna_vib_i2c0_probe+
- D/PrintK ( 1): <6>[VIB]luna_vib_i2c0_probe-
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, i2c0 add Pass
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, wait i2c probe, Pass
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, pin[VIB_HEN]=o/p 0
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, pin[VIB_LEN]=o/p 1
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, pin[VIB_CLK]=o/p 0
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, Vibrator Reset, Pass
- D/PrintK ( 1): <6>[VIB]luna_vib_probe, Vibrator init Pass!
- D/PrintK ( 1): <6>[VIB]ctrl: create PASS, ret=0
- D/PrintK ( 1): <6>[VIB]luna_vib_probe-
- W/PrintK ( 1): BootLog, -luna_vib_init, ret=0
- D/PrintK ( 1): <6>Linux video capture interface: v2.00
- D/PrintK ( 1): <6>usbcore: registered new interface driver uvcvideo
- D/PrintK ( 1): <6>USB Video Class driver (v0.1.0)
- D/PrintK ( 1): <6>trpc_sema_init: registered misc dev 10:46
- D/PrintK ( 1): <6>trpc_node_register: Adding 'local' to node list
- D/PrintK ( 1): <6>tegra_avp_probe: allocated carveout memory at 17d00000 for AVP kernel
- D/PrintK ( 1): <6>trpc_node_register: Adding 'avp-remote' to node list
- D/PrintK ( 1): <6>tegra_avp_probe: message area 172ba000/172ba110
- D/PrintK ( 1): <6>tegra_camera: probe
- W/PrintK ( 1): BootLog, +ov5642_init+
- D/PrintK ( 1): <6>ov5642 sensor driver loading
- D/PrintK ( 1): <6>ov5642: probing sensor.
- W/PrintK ( 1): BootLog, -ov5642_init-, ret=0
- W/PrintK ( 1): BootLog, +ov9665_init+
- D/PrintK ( 1): <6>[CAM]ov9665_i2c_probe+
- D/PrintK ( 1): <6>[CAM]create /sys/devices/virtual/misc/ov9665/id
- D/PrintK ( 1): <6>[CAM]ov9665_i2c_probe-
- W/PrintK ( 1): BootLog, -ov9665_init-, ret=0
- W/PrintK ( 1): BootLog, +luna_bat_init
- D/PrintK ( 1): <6>[BAT]luna_bat_probe+, system_rev = 9
- D/PrintK ( 1): <6>[BAT]luna_bat_i2c_probe+, client=luna_bat_i2c4, id=luna_bat_i2c4, adapter=Tegra I2C adapter, id=0, system_rev = 9
- D/PrintK ( 1): <6>[BAT]luna_bat_i2c_probe-
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, i2c4 add Pass
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, wait i2c probe, Pass
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[IUSB]=o/p 0, Active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[CEN ]=o/p 0, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[DCM ]=o/p 0, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[LIMD]=o/p 1, Active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[LIMB]=o/p 1, Active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[OTG ]=o/p 0, Active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[UOK ]=i/p 1, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[FLT ]=i/p 1, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[CHG ]=i/p 1, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[DOK ]=i/p 1, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[GLOW]=i/p 1, De-active
- D/PrintK ( 1): <6>[BAT]luna_bat_probe, pin[BLOW]=i/p 1, De-active
- D/PrintK ( 5): <6>[BAT]luna_bat_work_func_poweroff+
- D/PrintK ( 5): <6>[BAT]luna_bat_work_func_poweroff-
- D/PrintK ( 5): <6>[BAT]luna_bat_gauge_verify+
- D/PrintK ( 5): <6>[BAT]luna_bat_gauge_verify, (02)B3 E0 78 BD (06)00 00 00 03 (0A)FF FF 59 1F (0C)FF FF
- D/PrintK ( 1): <6>[BAT]luna_bat_probe-, ret=0
- W/PrintK ( 1): BootLog, -luna_bat_init, ret=0
- W/PrintK ( 1): bootlog, +tegra_wdt_init
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, tegra_wdt_set_timeout, !!! NOT set ptv !!!
- W/PrintK ( 64): dog, +tegra_wdt_enable
- W/PrintK ( 1): bootlog, -tegra_wdt_init, ret=0
- D/PrintK ( 1): <6>device-mapper: uevent: version 1.0.3
- D/PrintK ( 1): <6>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
- D/PrintK ( 1): <6>Bluetooth: HCI UART driver ver 2.2
- D/PrintK ( 1): <6>Bluetooth: HCI H4 protocol initialized
- D/PrintK ( 1): <6>Bluetooth: HCILL protocol initialized
- D/PrintK ( 1): <6>Bluetooth: BlueSleep Mode Driver Ver 1.1
- E/PrintK ( 1): <3>bluesleep_probe: get bt_ext_wake gpio from bcom4329_get_wakepin
- E/PrintK ( 1):
- D/PrintK ( 1): <6>cpuidle: using governor ladder
- D/PrintK ( 1): <6>cpuidle: using governor menu
- D/PrintK ( 1): <6>sdhci: Secure Digital Host Controller Interface driver
- D/PrintK ( 1): <6>sdhci: Copyright(c) Pierre Ossman
- W/PrintK ( 1): [sdcard] ok to allocate memory!
- W/PrintK ( 1): <4>mmc0: Invalid maximum block size, assuming 512 bytes
- W/PrintK ( 1): <4>sdhci-tegra.3 supply vmmc not found, using dummy regulator
- D/PrintK ( 1): <6>mmc0: SDHCI controller on tegra [sdhci-tegra.3] using ADMA
- D/PrintK ( 1): <6>sdhci3: initialized irq 63 ioaddr fe600600
- W/PrintK ( 1): <4>mmc1: Invalid maximum block size, assuming 512 bytes
- D/PrintK ( 1): <6>mmc1: SDHCI controller on tegra [sdhci-tegra.2] using ADMA
- D/PrintK ( 1): <6>sdhci2: initialized irq 51 ioaddr fe600400
- W/PrintK ( 1): <4>mmc2: Invalid maximum block size, assuming 512 bytes
- W/PrintK ( 1): <4>sdhci-tegra.0 supply vmmc not found, using dummy regulator
- D/PrintK ( 1): <6>mmc2: SDHCI controller on tegra [sdhci-tegra.0] using ADMA
- D/PrintK ( 1): <6>sdhci0: initialized irq 46 ioaddr fe600000
- W/PrintK ( 1): BootLog, +luna_led_init
- D/PrintK ( 1): <6>[LED]luna_led_probe+
- V/PrintK ( 1): <7>Registered led device: red
- V/PrintK ( 1): <7>Registered led device: green
- D/PrintK ( 1): <6>[LED]luna_led_probe- PASS, ret=0
- W/PrintK ( 1): BootLog, -luna_led_init, ret=0
- W/PrintK ( 1): BootLog, +usimplug_init+
- D/PrintK ( 1): <6>usimplug: usimplug_probe()
- D/PrintK ( 1): <6>usimplug: default state 1
- D/PrintK ( 1): <6>usimplug: usimplug_probe(), ret=0
- W/PrintK ( 1): BootLog, -usimplug_init-, ret=0
- D/PrintK ( 1): <6>tegra-aes tegra-aes: d7029ed8
- D/PrintK ( 1): <6>usbcore: registered new interface driver usbhid
- D/PrintK ( 1): <6>usbhid: USB HID core driver
- D/PrintK ( 1): <6>logger: created 1024K log 'log_main'
- D/PrintK ( 1): <6>logger: created 256K log 'log_events'
- D/PrintK ( 1): <6>logger: created 512K log 'log_radio'
- D/PrintK ( 1): <6>logger: created 64K log 'log_system'
- D/PrintK ( 1): <6>usbcore: registered new interface driver snd-usb-audio
- W/PrintK ( 1): AUDIO_CODEC: cdev_alloc
- D/PrintK ( 1): <6>WM8903 0-001a: d7029ea8
- D/PrintK ( 47): <6>mmc0: new high speed MMC card at address 0001
- D/PrintK ( 47): <6>mmcblk3: mmc0:0001 SEM16G 14.8 GiB
- W/PrintK ( 47): <4>Alternate GPT is invalid, using primary GPT.
- D/PrintK ( 47): <6> mmcblk3: p1 (SOS) p2 (LNX) p3 (APP) p4 (CAC) p5 (MSC) p6 (FDR) p7 (OLG) p8 (LGF) p9 (RES) p10 (RGN) p11 (VAR) p12 (USP) p13 (UDA) p14 (WP1) p15 (WP2)
- W/PrintK ( 47): <4>Qisda backdoor: set p15 to read-only
- D/PrintK ( 5): <6>[BAT]luna_bat_gauge_verify, TestSOC = 201 193 ### PASS ###
- D/PrintK ( 47): <6>mmc1: new high speed SDHC card at address b368
- D/PrintK ( 47): <6>mmcblk2: mmc1:b368 00000 7.51 GiB
- D/PrintK ( 47): <6> mmcblk2: p1
- D/PrintK ( 1): <6>tegra_i2s_driver_probe
- D/PrintK ( 1): <6>tegra_i2s_driver_probe
- D/PrintK ( 1): <6>i2s_set_channel_bit_count: enabling non-symmetric mode
- D/PrintK ( 1): <6>tegra_spdif_driver_probe
- D/PrintK ( 1): <6>BootLog +soc_probe+
- D/PrintK ( 1): <6>asoc: WM8903 <-> tegra-i2s-1 mapping ok
- D/PrintK ( 1): <6>asoc: tegra_generic_voice_codec <-> tegra-i2s-2 mapping ok
- D/PrintK ( 1): <6>asoc: tegra_generic_spdif_codec <-> tegra-spdif mapping ok
- D/PrintK ( 1): <6>BootLog +tegra_jack_init+
- V/PrintK ( 1): <7>[ASOC-DBG]tegra_ext_control +tegra_ext_control, newcon: 0
- V/PrintK ( 1):
- D/PrintK ( 1): <6>input: tegra Wired Accessory Hook as /devices/platform/soc-audio/sound/card0/input5
- D/PrintK ( 1): <6>input: tegra Dock Detection as /devices/platform/soc-audio/sound/card0/input6
- D/PrintK ( 1): <6>input: tegra Wired Accessory Jack as /devices/platform/soc-audio/sound/card0/input7
- D/PrintK ( 1): <6>BootLog -soc_probe-
- D/PrintK ( 1): <6>ALSA device list:
- D/PrintK ( 1): <6> #0: tegra (WM8903)
- D/PrintK ( 1): <6>GACT probability NOT on
- D/PrintK ( 1): <6>Mirror/redirect action on
- D/PrintK ( 1): <6>u32 classifier
- D/PrintK ( 1): <6> Actions configured
- D/PrintK ( 1): <6>Netfilter messages via NETLINK v0.30.
- D/PrintK ( 1): <6>nf_conntrack version 0.5.0 (5805 buckets, 23220 max)
- D/PrintK ( 1): <6>ctnetlink v0.93: registering with nfnetlink.
- D/PrintK ( 1): <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- D/PrintK ( 1): <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- D/PrintK ( 1): <6>xt_time: kernel timezone is -0000
- D/PrintK ( 1): <6>IPv4 over IPv4 tunneling driver
- D/PrintK ( 1): <6>GRE over IPv4 tunneling driver
- D/PrintK ( 1): <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- D/PrintK ( 1): <6>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- D/PrintK ( 1): <6>arp_tables: (C) 2002 David S. Miller
- D/PrintK ( 1): <6>TCP cubic registered
- D/PrintK ( 1): <6>NET: Registered protocol family 10
- D/PrintK ( 1): <6>lo: Disabled Privacy Extensions
- D/PrintK ( 1): <6>tunl0: Disabled Privacy Extensions
- D/PrintK ( 1): <6>Mobile IPv6
- D/PrintK ( 1): <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
- D/PrintK ( 1): <6>IPv6 over IPv4 tunneling driver
- D/PrintK ( 1): <6>sit0: Disabled Privacy Extensions
- D/PrintK ( 1): <6>ip6tnl0: Disabled Privacy Extensions
- D/PrintK ( 1): <6>NET: Registered protocol family 17
- D/PrintK ( 1): <6>NET: Registered protocol family 15
- D/PrintK ( 1): <6>Bluetooth: L2CAP ver 2.15
- D/PrintK ( 1): <6>Bluetooth: L2CAP socket layer initialized
- D/PrintK ( 1): <6>Bluetooth: SCO (Voice Link) ver 0.6
- D/PrintK ( 1): <6>Bluetooth: SCO socket layer initialized
- D/PrintK ( 1): <6>Bluetooth: RFCOMM TTY layer initialized
- D/PrintK ( 1): <6>Bluetooth: RFCOMM socket layer initialized
- D/PrintK ( 1): <6>Bluetooth: RFCOMM ver 1.11
- D/PrintK ( 1): <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- D/PrintK ( 1): <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- D/PrintK ( 1): <6>lib80211: common routines for IEEE802.11 drivers
- V/PrintK ( 1): <7>lib80211_crypt: registered algorithm 'NULL'
- D/PrintK ( 1): <6>ThumbEE CPU extension supported.
- W/PrintK ( 1): <4>Disabling clock audio left on by bootloader
- W/PrintK ( 1): <4>Disabling clock stat_mon left on by bootloader
- W/PrintK ( 1): <4>Disabling clock fuse_burn left on by bootloader
- W/PrintK ( 1): <4>Disabling clock pll_c_out1 left on by bootloader
- W/PrintK ( 1): <4>Disabling clock pll_c left on by bootloader
- E/PrintK ( 1): <3>Tegra protected aperture disabled because nvmap is using system memory
- D/PrintK ( 1): <6>[PMU]tps6586x_regulator_enable, REG-GPIO_3
- E/PrintK ( 1): <3>## hdmi_enb_init ##
- D/PrintK ( 1): <6>input: Luna headset as /devices/virtual/input/input8
- D/PrintK ( 5): <6>[BAT]luna_bat_gauge_verify, VCELL = 3597 (B3 E0), SOC = 60 (78 BD)
- D/PrintK ( 5): <6>[BAT]luna_bat_gauge_verify- ### PASS ###
- D/PrintK ( 5): <6>[BAT]luna_bat_work_func Gauge verify PASS!
- W/PrintK ( 5): tp_cable_state restore T28 & T9
- D/PrintK ( 5): <6>[BAT]## bat_status: Unknown -> Discharging
- D/PrintK ( 5): <6>[BAT]## bat_health: Unknown -> Good
- D/PrintK ( 5): <6>[BAT]## bat_cap=60(60), vol=3597, temp=279, ac=0(0), usb=0(0) 0mA, chg=0
- D/PrintK ( 1): <6>ventana_ov5642_late_init()+
- D/PrintK ( 1): <6>[PMU]tps6586x_ldo_set_voltage, REG-LDO_5 2850~2850
- D/PrintK ( 1): <6>[PMU]tps6586x_ldo_set_voltage, REG-LDO_0 2850~2850
- D/PrintK ( 1): <6>ventana_ov5642_late_init()-, ret 0
- D/PrintK ( 1): <6>ventana_datacards_late_init()
- E/PrintK ( 1): <3>__datacards_gpio_request: request ventana_datacards_3v3 failed (-16)
- D/PrintK ( 1): <6>VFP support v0.3:
- V/PrintK ( 1): implementor 41 architecture 3 part 30 variant 9 rev 1
- D/PrintK ( 1): <6>tps6586x-rtc tps6586x-rtc.0: d7029f40
- W/PrintK ( 1): <4>Warning: unable to open an initial console.
- D/PrintK ( 1): <6>Freeing init memory: 188K
- W/PrintK ( 1): <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- E/PrintK ( 1): <3>init: could not open /dev/keychord
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p3):
- V/PrintK ( 81): INFO: recovery required on readonly filesystem
- V/PrintK ( 81):
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p3):
- V/PrintK ( 81): write access will be enabled during recovery
- V/PrintK ( 81):
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p3):
- V/PrintK ( 81): recovery complete
- V/PrintK ( 81):
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p3):
- V/PrintK ( 81): mounted filesystem with ordered data mode. Opts: (null)
- V/PrintK ( 81):
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p4):
- V/PrintK ( 81): mounted filesystem with ordered data mode. Opts: errors=panic
- V/PrintK ( 81):
- D/PrintK ( 5): <6>[BAT]## bat_cap=60(59), vol=3592, temp=282, ac=0(0), usb=0(0) 0mA, chg=0
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p13):
- V/PrintK ( 81): recovery complete
- V/PrintK ( 81):
- D/PrintK ( 81): <6>EXT4-fs (mmcblk3p13):
- V/PrintK ( 81): mounted filesystem with ordered data mode. Opts: errors=panic
- V/PrintK ( 81):
- E/PrintK ( 1): <3>init: cannot find '/system/bin/vold', disabling 'vold'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/netd', disabling 'netd'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/app_process', disabling 'zygote'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/keystore', disabling 'keystore'
- V/PrintK ( 1): <7>opening ttyHS2...
- V/PrintK ( 1): <7>ttyHS2 flags a00
- V/PrintK ( 1): <7>tty_release_dev of ttyHS2 (tty count=1)...
- V/PrintK ( 1): <7>ttyHS2 flags a00
- V/PrintK ( 1): <7>freeing tty structure...
- V/PrintK ( 1): <7>opening ttyHS2...
- V/PrintK ( 1): <7>ttyHS2 flags a00
- V/PrintK ( 1): <7>tty_release_dev of ttyHS2 (tty count=1)...
- V/PrintK ( 1): <7>ttyHS2 flags a00
- V/PrintK ( 1): <7>freeing tty structure...
- V/PrintK ( 1): <7>opening ttyHS3...
- V/PrintK ( 1): <7>ttyHS3 flags a00
- V/PrintK ( 1): <7>tty_release_dev of ttyHS3 (tty count=1)...
- V/PrintK ( 1): <7>ttyHS3 flags a00
- V/PrintK ( 1): <7>freeing tty structure...
- V/PrintK ( 1): <7>opening ttyHS3...
- V/PrintK ( 1): <7>ttyHS3 flags a00
- V/PrintK ( 1): <7>tty_release_dev of ttyHS3 (tty count=1)...
- V/PrintK ( 1): <7>ttyHS3 flags a00
- V/PrintK ( 1): <7>freeing tty structure...
- I/installd( 96): installd firing up
- E/PrintK ( 1): <3>init: service 'console' requires console
- E/PrintK ( 1): <3>android_usb: already disabled
- D/PrintK ( 1): <6>adb_bind_config
- D/PrintK ( 1): <6>adb_bind_config
- D/PrintK ( 109): <6>adb_open
- V/PrintK ( 118): <7>tty_reopen: pts0 flags a00
- V/PrintK ( 118): <7>opening pts0...
- V/PrintK ( 118): <7>pts0 flags a00
- I/DEBUG ( 91): debuggerd: Feb 26 2013 10:27:21
- I/cm ( 129): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
- I/cm ( 131): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
- I/cm ( 133): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
- I/cm ( 144): Welcome to Android 4.2.1 / CyanogenMod-10.1-20130226-UNOFFICIAL-streak7
- V/PrintK ( 118): <7>tty_release_dev of pts0 (tty count=2)...
- V/PrintK ( 118): <7>pts0 flags a01
- V/PrintK ( 114): <7>tty_release_dev of ptm0 (tty count=1)...
- V/PrintK ( 114): <7>ptm0 flags a05
- V/PrintK ( 114): <7>pts0 vhangup...
- V/PrintK ( 114): <7>pts0 flags a05
- V/PrintK ( 114): <7>freeing tty structure...
- D/PrintK ( 92): <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
- I/SurfaceFlinger( 93): SurfaceFlinger is starting
- I/SurfaceFlinger( 93): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
- I/ServiceManager( 98): Waiting for service SurfaceFlinger...
- D/PrintK ( 145): <6>Adding 102396k swap on /data/ubuntu/SWAP.swap. Priority:-1 extents:3 across:176124k SS
- D/libEGL ( 93): loaded /system/lib/egl/libEGL_tegra.so
- D/libEGL ( 93): loaded /system/lib/egl/libGLESv1_CM_tegra.so
- D/NvOsDebugPrintf( 93): NvRmPrivGetChipIdStub: Could not read Tegra chip id/rev
- D/NvOsDebugPrintf( 93): Expected on kernels without Tegra3 support, using Tegra2
- D/libEGL ( 93): loaded /system/lib/egl/libGLESv2_tegra.so
- I/gralloc ( 93): using (fd=28)
- I/gralloc ( 93): id = tegra_fb
- I/gralloc ( 93): xres = 800 px
- I/gralloc ( 93): yres = 480 px
- I/gralloc ( 93): xres_virtual = 800 px
- I/gralloc ( 93): yres_virtual = 960 px
- I/gralloc ( 93): bpp = 32
- I/gralloc ( 93): r = 0:8
- I/gralloc ( 93): g = 8:8
- I/gralloc ( 93): b = 16:8
- I/gralloc ( 93): smem_start = 0x17800000
- I/gralloc ( 93): smem_len = 0x00200000
- I/gralloc ( 93): format = 1
- I/gralloc ( 93): stride = 800
- I/gralloc ( 93): width = 127 mm (160.000000 dpi)
- I/gralloc ( 93): height = 76 mm (160.421051 dpi)
- I/gralloc ( 93): refresh rate = 60.00 Hz
- I/SurfaceFlinger( 93): Using composer version 0.1
- W/SurfaceFlinger( 93): getting VSYNC period from fb HAL: 16666666
- W/SurfaceFlinger( 93): no suitable EGLConfig found, trying without EGL_FRAMEBUFFER_TARGET_ANDROID
- E/Trace ( 93): error opening trace file: No such file or directory (2)
- I/SurfaceFlinger( 93): EGL informations:
- I/SurfaceFlinger( 93): vendor : Android
- I/SurfaceFlinger( 93): version : 1.4 Android META-EGL
- I/SurfaceFlinger( 93): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_NV_system_time EGL_ANDROID_image_native_buffer
- I/SurfaceFlinger( 93): Client API: OpenGL_ES
- I/SurfaceFlinger( 93): EGLSurface: 8-8-8-8, config=0xcaf32c
- I/SurfaceFlinger( 93): OpenGL ES informations:
- I/SurfaceFlinger( 93): vendor : NVIDIA Corporation
- I/SurfaceFlinger( 93): renderer : NVIDIA AP
- I/SurfaceFlinger( 93): version : OpenGL ES-CM 1.1
- I/SurfaceFlinger( 93): extensions: GL_EXT_debug_marker GL_EXT_bgra GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_format_BGRA8888 GL_EXT_unpack_subimage GL_NV_texture_npot_2D_mipmap GL_OES_byte_coordinates GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_draw_texture GL_OES_extended_matrix_palette GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_fbo_render_mipmap GL_OES_fixed_point GL_OES_framebuffer_object GL_OES_matrix_get GL_OES_matrix_palette GL_OES_point_size_array GL_OES_point_sprite GL_OES_query_matrix GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_single_precision GL_OES_stencil8 GL_OES_texture_cube_map GL_OES_vertex_half_float
- I/SurfaceFlinger( 93): GL_MAX_TEXTURE_SIZE = 2048
- I/SurfaceFlinger( 93): GL_MAX_VIEWPORT_DIMS = 3839 x 3839
- E/PrintK ( 1): <3>init: no such service 'bootanim'
- D/SurfaceFlinger( 93): Screen acquired, type=0 flinger=0x2adc1318
- E/Trace ( 98): error opening trace file: No such file or directory (2)
- I/ubuntu::detail::ApplicationManager( 98): virtual bool android::InputSetup::DummyApplication::updateInfo()
- I/ubuntu::detail::ApplicationManager( 98): virtual bool android::InputSetup::DummyApplicationWindow::updateInfo()
- I/mediaserver( 95): ServiceManager: 0x2bbfddd0
- I/AudioFlinger( 95): Using default 3000 mSec as standby time.
- I/CameraService( 95): CameraService started (pid=95)
- E/CameraService( 95): Could not load camera HAL module
- I/AudioPolicyManagerBase( 95): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
- D/EventHub( 98): No input device configuration file found for device 'Luna headset'.
- D/PrintK ( 95): <6>tegra_audio_route : device_new : 4
- V/PrintK ( 95): <7>[ASOC-DBG]tegra_ext_control +tegra_ext_control, newcon: 4
- V/PrintK ( 95):
- I/AudioFlinger( 95): loadHwModule() Loaded primary audio interface from Betelgeuse audio HW HAL (audio) handle 1
- I/AudioFlinger( 95): HAL output buffer size 512 frames, normal mix buffer size 1024 frames
- I/EventHub( 98): New device: id=1, fd=33, path='/dev/input/event8', name='Luna headset', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- I/AudioMixer( 95): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
- E/MonoPipe( 95): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional
- W/AudioFlinger( 95): Policy SCHED_FIFO priority 3 is unavailable for pid 95 tid 162; error -1
- I/AudioFlinger( 95): Using module 1 has the primary audio interface
- I/AudioFlinger( 95): AudioFlinger's thread 0x2bc07910 ready to run
- W/AudioFlinger( 95): Thread AudioOut_2 cannot connect to the power manager service
- W/AudioFlinger( 95): Thread AudioOut_2 cannot connect to the power manager service
- E/AudioFlinger( 95): int android::load_audio_interface(const char*, audio_hw_device_t**) couldn't load audio hw module audio.a2dp (No such file or directory)
- I/AudioFlinger( 95): loadHwModule() error -2 loading module a2dp
- W/AudioPolicyManagerBase( 95): could not open HW module a2dp
- I/AudioFlinger( 95): loadHwModule() Loaded usb audio interface from USB audio HW HAL (audio) handle 3
- I/AudioPolicyService( 95): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
- D/EventHub( 98): No input device configuration file found for device 'lsensor_taos'.
- I/EventHub( 98): New device: id=3, fd=34, path='/dev/input/event3', name='mXT224_touchscreen', classes=0x14, configuration='/system/usr/idc/mXT224_touchscreen.idc', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- W/PrintK ( 98): int work and work Q for sar
- D/EventHub( 98): No input device configuration file found for device 'tegra_keypad_key'.
- I/EventHub( 98): New device: id=4, fd=35, path='/dev/input/event2', name='tegra_keypad_key', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- D/EventHub( 98): No input device configuration file found for device 'ATA2538_capkey'.
- I/EventHub( 98): New device: id=5, fd=36, path='/dev/input/event1', name='ATA2538_capkey', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/ATA2538_capkey.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- D/EventHub( 98): No input device configuration file found for device 'sensors_daemon'.
- D/EventHub( 98): No input device configuration file found for device 'tegra Wired Accessory Jack'.
- I/EventHub( 98): New device: id=7, fd=37, path='/dev/input/event7', name='tegra Wired Accessory Jack', classes=0x80, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- D/EventHub( 98): No input device configuration file found for device 'tegra Dock Detection'.
- I/EventHub( 98): New device: id=8, fd=38, path='/dev/input/event6', name='tegra Dock Detection', classes=0x80, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- D/EventHub( 98): No input device configuration file found for device 'tegra Wired Accessory Hook'.
- I/EventHub( 98): New device: id=9, fd=39, path='/dev/input/event5', name='tegra Wired Accessory Hook', classes=0x80, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
- I/InputReader( 98): Device added: id=-1, name='Virtual', sources=0x00000301
- I/InputReader( 98): Device added: id=9, name='tegra Wired Accessory Hook', sources=0x80000000
- I/InputReader( 98): Device added: id=8, name='tegra Dock Detection', sources=0x80000000
- I/InputReader( 98): Device added: id=7, name='tegra Wired Accessory Jack', sources=0x80000000
- I/InputReader( 98): Device added: id=5, name='ATA2538_capkey', sources=0x00000101
- I/InputReader( 98): Device added: id=4, name='tegra_keypad_key', sources=0x00000101
- I/InputReader( 98): Device reconfigured: id=3, name='mXT224_touchscreen', size 800x480, orientation 0, mode 1, display id 0
- I/InputReader( 98): Device added: id=3, name='mXT224_touchscreen', sources=0x00001002
- I/InputReader( 98): Device added: id=1, name='Luna headset', sources=0x00000101
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- D/SensorService( 97): nuSensorService starting...
- D/Sensors ( 97): libsensors: Entering function m_open_sensors with param name = poll
- D/Sensors ( 97): libsensors: Entering function m_poll_activate with handle = 1, enable = 0
- D/Sensors ( 97): activate_mag(0)
- D/Sensors ( 97): libsensors: Entering function m_poll_activate with handle = 0, enable = 0
- D/Sensors ( 97): activate_acc(0)
- D/Sensors ( 97): active_acc disabling
- D/Sensors ( 97): libsensors: Entering function m_poll_activate with handle = 2, enable = 0
- D/Sensors ( 97): activate_orientation(0)
- I/SensorService( 97): AK8975 3-axis Magnetic field sensor
- I/SensorService( 97): LSM303DLH 3-axis Accelerometer sensor
- I/SensorService( 97): LSM303DLH 3-axis Orientation sensor
- D/SensorService( 97): nuSensorService thread starting...
- D/PrintK ( 0): <6>[BAT]luna_bat_dok_irq_handler ## [DOK] (queue work)
- D/PrintK ( 17): <6>[PMU]tps6586x_irq+
- D/PrintK ( 17): <6>[PMU]tps6586x_irq-, acks=00040000
- D/PrintK ( 39): <6>tegra-otg tegra-otg: d7231f38
- V/PrintK ( 39): fsl_udc_core: VBUS on, cable connected
- W/PrintK ( 0): [USB]fsl_vbus_draw current = 2 mA
- D/PrintK ( 0): <6>[BAT]Set [USB 100]
- W/PrintK ( 5): tp_cable_state set T28[16] & T9
- D/PrintK ( 5): <6>[BAT]## usb_online: 0 -> 1 (1)
- D/PrintK ( 5): <6>[BAT]## usb_current: 0 -> 100
- D/PrintK ( 5): <6>[BAT]## wake_lock: 0->1, vol=3598, glow=1, ac=0(0), usb=1(1), chg=4956, soc=59
- D/PrintK ( 39): <6>android_work: did not send uevent (0 0 (null))
- W/PrintK ( 5): rid=f msg=10 10 0 0 0 0 0 checksum=ff
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=CONNECTED
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=DISCONNECTED
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=CONNECTED
- W/PrintK ( 0): [USB]fsl_vbus_draw current = 2 mA
- D/PrintK ( 0): <6>[BAT]Set [USB 100]
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=DISCONNECTED
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=DISCONNECTED
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=CONNECTED
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=CONNECTED
- D/PrintK ( 0): <6>android_usb gadget: c0639e18
- V/PrintK ( 0): [USB]fsl_vbus_draw current = 500 mA
- D/PrintK ( 0): <6>[BAT]Set [USB 500]
- D/PrintK ( 39): <6>android_work: sent uevent USB_STATE=CONFIGURED
- D/PrintK ( 5): <6>[BAT]## usb_current: 100 -> 500
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- V/PrintK ( 184): <7>opening pts0...
- V/PrintK ( 184): <7>pts0 flags a00
- V/PrintK ( 184): <7>tty_reopen: pts0 flags a00
- V/PrintK ( 109): <7>tty_release_dev of ptm0 (tty count=1)...
- V/PrintK ( 109): <7>ptm0 flags a01
- V/PrintK ( 109): <7>pts0 vhangup...
- V/PrintK ( 109): <7>pts0 flags a05
- V/PrintK ( 184): <7>hung_up_tty_write ...
- V/PrintK ( 184): <7>tty_release_dev of pts0 (tty count=1)...
- V/PrintK ( 184): <7>pts0 flags 40a04
- V/PrintK ( 184): <7>freeing tty structure...
- V/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- V/PrintK ( 5): <7>hub 1-0:1.0: d7031ec8
- V/PrintK ( 5): <7>usb usb1: d7031eb8
- V/PrintK ( 5): <7>tegra-ehci tegra-ehci.2: d7031e70
- D/PrintK ( 5): <6>[BAT]## bat_cap=59(58), vol=3667, temp=278, ac=0(0), usb=1(1) 500mA, chg=4732
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- V/PrintK ( 216): <7>tty_reopen: pts0 flags a00
- V/PrintK ( 216): <7>opening pts0...
- V/PrintK ( 216): <7>pts0 flags a00
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- D/PrintK ( 5): <6>[BAT]## bat_cap=58(57), vol=3665, temp=285, ac=0(0), usb=1(1) 500mA, chg=4742
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
- W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement