Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@rk3288:/ # dmesg
- <6>[ 0.000000] Booting Linux on physical CPU 0x500
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <5>[ 0.000000] Linux version 3.10.0 (root@five-server2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #14 SMP PREEMPT Sun Sep 28 15:36:23 CST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <6>[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
- <4>[ 0.000000] rockchip_ion_reserve
- <6>[ 0.000000] rockchip_ion_find_reserve_mem: heap type is 1
- <6>[ 0.000000] rockchip_ion_find_reserve_mem: reserve cma memory: 28000000@40000000
- <6>[ 0.000000] cma: CMA: reserved 640 MiB at 40000000
- <6>[ 0.000000] cma: CMA: reserved 16 MiB at 1dc00000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <4>[ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
- <7>[ 0.000000] On node 0 totalpages: 524288
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0d4d300, node_mem_map c0e65000
- <7>[ 0.000000] Normal zone: 984 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 125952 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 3112 pages used for memmap
- <7>[ 0.000000] HighMem zone: 398336 pages, LIFO batch:31
- <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1e99000 s13952 r8192 d14720 u36864
- <7>[ 0.000000] pcpu-alloc: s13952 r8192 d14720 u36864 alloc=9*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523304
- <5>[ 0.000000] Kernel command line: vmalloc=512M vmalloc=516M console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000E000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001A000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00153000@0x00092000(system),0x00002000@0x001E5000(metadata),0x00800000@0x001E7000(userdata),-@0x009E7000(user) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2015-03-02_16:26:24
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 2048MB = 2048MB total
- <5>[ 0.000000] Memory: 1391532k/1391532k available, 705620k reserved, 937984K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xdf000000 - 0xff000000 ( 512 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xdec00000 ( 492 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc097eac0 (9691 kB)
- <5>[ 0.000000] .init : 0xc097f000 - 0xc0cd3680 (3410 kB)
- <5>[ 0.000000] .data : 0xc0cd4000 - 0xc0d548e0 ( 515 kB)
- <5>[ 0.000000] .bss : 0xc0d548e0 - 0xc0e6427c (1087 kB)
- <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- <6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
- <4>[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
- <4>[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
- <4>[ 0.000000] rkclk_init_clks: cnt_parent = 7
- <4>[ 0.000000] rkclk_init_clks: cnt_rate = 31
- <4>[ 0.000000] rk3288 set GPLL BW 20 for HDMI!
- <4>[ 0.000000] rkclk_init_clks: aclk_vio0 has been inited in uboot, ingored
- <6>[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- <6>[ 0.000000] Switching to timer-based delay loop
- <6>[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
- <6>[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
- <6>[ 0.359081] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- <6>[ 0.359096] pid_max: default: 32768 minimum: 301
- <6>[ 0.359203] Security Framework initialized
- <6>[ 0.359260] Mount-cache hash table entries: 512
- <6>[ 0.359877] Initializing cgroup subsys debug
- <6>[ 0.359892] Initializing cgroup subsys freezer
- <6>[ 0.359920] CPU: Testing write buffer coherency: ok
- <3>[ 0.360215] /cpus/cpu@0 missing clock-frequency property
- <3>[ 0.360228] /cpus/cpu@1 missing clock-frequency property
- <3>[ 0.360238] /cpus/cpu@2 missing clock-frequency property
- <3>[ 0.360247] /cpus/cpu@3 missing clock-frequency property
- <6>[ 0.360289] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
- <6>[ 0.360340] Setting up static identity map for 0xc06c6830 - 0xc06c6888
- <6>[ 0.362903] last_log: 0x1d500000 map to 0xdf004000 and copy to 0xdf086000, size 0x80000 early 0x148e (version 3.0)
- <4>[ 0.437361] CPU1: Booted secondary processor
- <6>[ 0.437394] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
- <4>[ 0.457044] CPU2: Booted secondary processor
- <6>[ 0.457068] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
- <4>[ 0.476752] CPU3: Booted secondary processor
- <6>[ 0.476776] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
- <6>[ 0.476876] Brought up 4 CPUs
- <6>[ 0.476904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- <6>[ 0.476913] CPU: All CPU(s) started in SVC mode.
- <6>[ 0.477626] devtmpfs: initialized
- <6>[ 0.482390] pinctrl core: initialized pinctrl subsystem
- <6>[ 0.482629] regulator-dummy: no parameters
- <6>[ 0.494062] NET: Registered protocol family 16
- <6>[ 0.495738] DMA: preallocated 256 KiB pool for atomic coherent allocations
- <6>[ 0.496018] ion_snapshot: 0x1d5a8000 map to 0xdf107000 and copy to 0xc0e3f9e4 (version 0.1)
- <6>[ 0.496410] Registered FIQ tty driver
- <6>[ 0.497631] console [ttyFIQ0] enabled
- <6>[ 0.497821] Registered fiq debugger ttyFIQ0
- <4>[ 0.498311] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
- <4>[ 0.498336] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
- <4>[ 0.498357] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
- <4>[ 0.498377] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
- <4>[ 0.498472] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
- <4>[ 0.498538] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
- <4>[ 0.498601] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
- <4>[ 0.498665] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
- <4>[ 0.498727] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
- <4>[ 0.498789] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
- <4>[ 0.498851] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
- <4>[ 0.498913] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
- <4>[ 0.498983] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
- <4>[ 0.499048] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
- <4>[ 0.499065] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
- <4>[ 0.499080] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
- <4>[ 0.499095] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
- <7>[ 0.499167] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
- <7>[ 0.499214] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
- <7>[ 0.499260] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
- <7>[ 0.499309] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
- <7>[ 0.499354] gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
- <7>[ 0.499397] gpiochip_add: registered GPIOs 160 to 191 on device: gpio5
- <7>[ 0.499448] gpiochip_add: registered GPIOs 192 to 223 on device: gpio6
- <7>[ 0.499494] gpiochip_add: registered GPIOs 224 to 255 on device: gpio7
- <7>[ 0.499538] gpiochip_add: registered GPIOs 256 to 287 on device: gpio8
- <7>[ 0.499588] gpiochip_add: registered GPIOs 288 to 319 on device: gpio15
- <4>[ 0.499613] rockchip_interrupts_register:bank_num=7
- <7>[ 0.501456] of_get_named_gpio_flags exited with status 245
- <4>[ 0.501468] of_get_gpio_init_config:gpio[0] = 245, value = 0
- <4>[ 0.501525] rockchip_pinctrl_probe:init ok
- <6>[ 0.508833] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- <6>[ 0.508851] hw-breakpoint: maximum watchpoint size is 4 bytes.
- <4>[ 0.509051] DDR DEBUG: version 1.00 20140603
- <4>[ 0.509081] DDR DEBUG: Channel a:
- <4>[ 0.509092] DDR DEBUG: LPDDR2 Device
- <4>[ 0.509107] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
- <4>[ 0.509120] DDR DEBUG: Channel b:
- <4>[ 0.509130] DDR DEBUG: LPDDR2 Device
- <4>[ 0.509144] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
- <4>[ 0.509156] DDR DEBUG: addr=0xd5a000
- <4>[ 0.509167] DDR DEBUG: stride=9, size=256, halfcap=40000000
- <4>[ 0.509179] DDR DEBUG: socAddr[0]=0xd5a000, socAddr[1]=0xd5a100
- <4>[ 0.509191] DDR DEBUG: chAddr[0]=0xd5a000, chAddr[1]=0xd5a000
- <4>[ 0.509205] DDR DEBUG: dtar[0]=0x201ab000, dtar[1]=0x201ab000
- <4>[ 0.509448] DDR DEBUG: init success!!! freq=300MHz
- <4>[ 0.509458] DDR DEBUG: Channel a:
- <4>[ 0.509472] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509489] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509505] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509522] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509537] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
- <4>[ 0.509549] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
- <4>[ 0.509561] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
- <4>[ 0.509570] DDR DEBUG: Channel b:
- <4>[ 0.509583] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509599] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509616] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509631] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=360,360
- <4>[ 0.509647] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
- <4>[ 0.509658] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
- <4>[ 0.509669] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
- <6>[ 0.526248] bio: create slab <bio-0> at 0
- <5>[ 0.527070] SCSI subsystem initialized
- <6>[ 0.527220] usbcore: registered new interface driver usbfs
- <6>[ 0.527272] usbcore: registered new interface driver hub
- <6>[ 0.527359] usbcore: registered new device driver usb
- <7>[ 0.527590] of_get_named_gpio_flags: can't parse gpios property
- <3>[ 0.527606] rk3288-usb-control usb_control.33: invalid host gpio-2
- <7>[ 0.527624] of_get_named_gpio_flags exited with status 12
- <7>[ 0.528136] of_get_named_gpio_flags exited with status 15
- <7>[ 0.528154] of_get_named_gpio_flags exited with status 16
- <6>[ 0.528306] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
- <7>[ 0.529089] of_get_named_gpio_flags exited with status 260
- <7>[ 0.529108] of_get_named_gpio_flags exited with status 261
- <6>[ 0.529244] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
- <7>[ 0.529856] of_get_named_gpio_flags exited with status 201
- <7>[ 0.529875] of_get_named_gpio_flags exited with status 202
- <6>[ 0.530000] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
- <7>[ 0.530273] of_get_named_gpio_flags exited with status 81
- <7>[ 0.530291] of_get_named_gpio_flags exited with status 80
- <6>[ 0.530412] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
- <7>[ 0.530509] of_get_named_gpio_flags exited with status 241
- <7>[ 0.530527] of_get_named_gpio_flags exited with status 242
- <6>[ 0.530646] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
- <6>[ 0.530938] media: Linux media interface: v0.10
- <6>[ 0.530978] Linux video capture interface: v2.00
- <6>[ 0.531213] rockchip_ion_parse_dt: num_heaps = 2
- <6>[ 0.531230] 0: 4 1 cma 0xc0d328a8
- <6>[ 0.531243] 1: 0 3 vmalloc 0x (null)
- <6>[ 0.531472] Rockchip ion module is successfully loaded (v1.0)
- <6>[ 0.531628] Advanced Linux Sound Architecture Driver Initialized.
- <6>[ 0.531976] Bluetooth: Core ver 2.16
- <6>[ 0.532011] NET: Registered protocol family 31
- <6>[ 0.532023] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.532040] Bluetooth: HCI socket layer initialized
- <6>[ 0.532054] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.532082] Bluetooth: SCO socket layer initialized
- <6>[ 0.532307] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.537318] vdd_arm: 712 <--> 1500 mV at 1050 mV
- <6>[ 0.541966] vdd_gpu: 712 <--> 1500 mV at 1050 mV
- <4>[ 0.542403] i2c-core: driver [rk818] using legacy suspend method
- <4>[ 0.542416] i2c-core: driver [rk818] using legacy resume method
- <4>[ 0.542458] ricoh619_i2c_probe,line=820
- <4>[ 0.542899] ricoh619_pre_init,line=788
- <7>[ 0.550229] of_get_named_gpio_flags exited with status 4
- <7>[ 0.550241] of_get_named_gpio_flags exited with status 0
- <7>[ 0.550252] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 0.550260] invalid gpio: -2
- <6>[ 0.559806] ricoh619_irq_init: ricoh619_pmic_irq=1
- <6>[ 0.565047] vccio: 3300 mV
- <6>[ 0.570543] ricoh619_dcdc2: 2000 mV
- <6>[ 0.576027] ricoh619_dcdc3: 3300 mV
- <6>[ 0.580776] vdd_logic: 700 <--> 1500 mV at 1100 mV
- <6>[ 0.586249] vcc_ddr: 1200 mV
- <6>[ 0.590245] vccio_pmu: 3300 mV
- <6>[ 0.594241] ricoh619_ldo2: 3300 mV
- <6>[ 0.598236] ricoh619_ldo3: 3300 mV
- <6>[ 0.602250] vccio_sd: 3300 mV
- <6>[ 0.606243] vcc_wl: 1800 mV
- <6>[ 0.610241] ricoh619_ldo6: 1800 mV
- <6>[ 0.614237] ricoh619_ldo7: 1000 mV
- <6>[ 0.618239] ricoh619_ldo8: 3300 mV
- <6>[ 0.622245] ricoh619_ldo9: 1000 mV
- <4>[ 0.624833] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
- <6>[ 0.626243] vcc_18: 1800 mV
- <6>[ 0.628911] ricoh619_ldortc1: 3300 mV
- <6>[ 0.631579] ricoh619_ldortc2: 3300 mV
- <6>[ 0.632404] PMU1: ricoh619_pwrkey_probe: key_irq=193
- <6>[ 0.632552] input: ricoh619_pwrkey as /devices/ff650000.i2c/i2c-0/0-0032/ricoh619-pwrkey/input/input0
- <4>[ 0.635859] ricoh619_rtc_probe,line=601
- <6>[ 0.640250] ricoh619-rtc ricoh619-rtc: PMU: print_time *** rtc-time : 6/18/2017 11:58:31 *****
- <6>[ 0.641973] ricoh619-rtc ricoh619-rtc: PMU: read alarm: 6/18/2017 11:45:14 *****
- <6>[ 0.642948] ricoh619-rtc ricoh619-rtc: PMU: print_time *** rtc-time : 6/18/2017 11:58:31 *****
- <6>[ 0.643074] ricoh619-rtc ricoh619-rtc: rtc core: registered ricoh619-rtc as rtc0
- <6>[ 0.644496] RICOH619 RTC Register Success
- <6>[ 0.645731] Switching to clocksource arch_sys_counter
- <4>[ 0.662317] uboot-logo-on:1
- <6>[ 0.662368] rk-fb rockchip-fb: rk fb ion client create success!
- <6>[ 0.662384] rk-fb rockchip-fb: rockchip framebuffer driver probe
- <6>[ 0.662734] rk-screen rk_screen.9: rockchip screen probe success
- <3>[ 0.662882] rk32-lvds ff96c000.lvds: screen is not lvds/rgb!
- <4>[ 0.662905] rk32-lvds: probe of ff96c000.lvds failed with error -22
- <6>[ 0.663304] rk32-edp rk32-edp: rk32 edp driver probe success
- <7>[ 0.663752] of_get_named_gpio_flags exited with status 227
- <6>[ 0.664000] graphics fb0: rockchip framebuffer registerd:fb0
- <6>[ 0.664334] graphics fb1: rockchip framebuffer registerd:fb1
- <6>[ 0.664482] graphics fb2: rockchip framebuffer registerd:fb2
- <6>[ 0.664634] graphics fb3: rockchip framebuffer registerd:fb3
- <6>[ 0.674715] rk3288-lcdc lcdc0: lcdc0: dclk:205000000>>fps:61
- <6>[ 0.674732] rk3288-lcdc lcdc0: wakeup from standby!
- <6>[ 0.724967] alloc_buffer:ion_phy_addr=0x40000000
- <6>[ 0.744985] fb0:phy:40000000>>vir:df15c000>>len:0x2500000
- <6>[ 0.745004] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
- <4>[ 0.745363] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.745489] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.746430] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.746576] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.747496] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.747629] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.748542] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.748685] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.749600] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.749726] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.750638] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.750769] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.751709] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.751845] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.752758] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.752912] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.753822] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.753969] rockchip_set_mux:warning ignore bank num 15
- <4>[ 0.754891] rockchip_set_mux:warning ignore bank num 15
- <6>[ 0.756147] NET: Registered protocol family 2
- <6>[ 0.756603] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 0.756685] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 0.756761] TCP: Hash tables configured (established 4096 bind 4096)
- <6>[ 0.756814] TCP: reno registered
- <6>[ 0.756829] UDP hash table entries: 256 (order: 1, 8192 bytes)
- <6>[ 0.756855] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- <6>[ 0.757031] NET: Registered protocol family 1
- <6>[ 0.794166] Unpacking initramfs...
- <6>[ 0.873228] Freeing initrd memory: 1864K (c5bf0000 - c5dc2000)
- <6>[ 0.873745] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
- <6>[ 0.874191] probe device ff9a0000.vpu_service
- <4>[ 0.874380] vpu_service: power on
- <6>[ 0.875436] checking hw id 4831
- <6>[ 0.875839] vpu_service set to auto frequency mode
- <4>[ 0.875875] vpu_service: power off...done
- <6>[ 0.875915] init success
- <6>[ 0.875962] probe device ff9c0000.hevc_service
- <4>[ 0.876153] hevc_service: power on
- <6>[ 0.877206] checking hw id 6867
- <4>[ 0.877425] hevc_service: power off...done
- <6>[ 0.877466] init success
- <4>[ 0.877584] rknandbase v1.0 2014-03-31
- <3>[ 0.877679] rknand ff400000.nandc0: no irq resource?
- <4>[ 0.877794] rknand_driver:ret = 0
- <6>[ 0.878151] audit: initializing netlink socket (disabled)
- <5>[ 0.878208] type=2000 audit(0.520:1): initialized
- <4>[ 0.878968] bounce pool size: 64 pages
- <6>[ 0.883272] fuse init (API version 7.22)
- <6>[ 0.883538] msgmni has been set to 921
- <6>[ 0.884899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 0.884917] io scheduler noop registered
- <6>[ 0.884928] io scheduler deadline registered
- <6>[ 0.885017] io scheduler cfq registered (default)
- <7>[ 0.885554] of_get_named_gpio_flags exited with status 226
- <4>[ 0.885630] pb->lth_brightness=0
- <6>[ 0.886065] rga ff920000.rga: rga ion client create success!
- <6>[ 0.886174] rga: Driver loaded succesfully
- <4>[ 0.886574] IEP Driver loaded succesfully
- <4>[ 0.886655] Module initialized.
- <6>[ 0.887336] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
- <6>[ 0.887356] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
- <6>[ 0.888584] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
- <6>[ 0.888605] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- <3>[ 0.888841] pwm-voltage-regulator pwm_regulator.27: unable to request PWM, trying legacy API
- <3>[ 0.888860] pwm-voltage-regulator pwm_regulator.27: unable to request legacy PWM
- <4>[ 0.888872] pwm_regulator_probe:error
- <6>[ 0.888894] platform pwm_regulator.27: Driver pwm-voltage-regulator requests probe deferral
- <4>[ 0.889204] rk_serial.c v1.8 2014-03-04
- <6>[ 0.889393] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
- <6>[ 0.889564] serial ff180000.serial: membase 0xe166c000
- <6>[ 0.892213] loop: module loaded
- <4>[ 0.892286] i2c-core: driver [mpu6050B1] using legacy suspend method
- <4>[ 0.892299] i2c-core: driver [mpu6050B1] using legacy resume method
- <6>[ 0.892316] mpu_init: Probe name mpu6050B1
- <3>[ 0.892472] ak8963_mod 1-000d: get compass-bus error
- <4>[ 0.892484] parse ak8963 dts failed
- <6>[ 0.892498] i2c i2c-1: ak8963_mod_probe: ak8963
- <4>[ 0.892507] yemk:ak8963_mod_probe
- <3>[ 0.892521] i2c i2c-1: inv_mpu_register_slave: Null mpu_private_data
- <3>[ 0.892534] invensense: in ak8963_mod_probe, result is -22
- <3>[ 0.892548] i2c i2c-1: Slave registration failed: ak8963, -22
- <3>[ 0.892562] i2c i2c-1: ak8963_mod_probe failed -22
- <4>[ 0.892578] ak8963_mod: probe of 1-000d failed with error -22
- <6>[ 0.892613] ak8963_mod_init: Probe name ak8963_mod
- <7>[ 0.892737] of_get_named_gpio_flags exited with status 236
- <6>[ 0.893179] SCSI Media Changer driver v0.25
- <6>[ 0.893470] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.893483] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.893612] PPP generic driver version 2.4.2
- <6>[ 0.893731] PPP BSD Compression module registered
- <6>[ 0.893744] PPP Deflate Compression module registered
- <6>[ 0.893764] PPP MPPE Compression module registered
- <6>[ 0.893777] NET: Registered protocol family 24
- <6>[ 0.893810] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 0.893823] CSLIP: code copyright 1989 Regents of the University of California.
- <4>[ 0.893837] Rockchip WiFi SYS interface (V1.00) ...
- <6>[ 0.893922] usbcore: registered new interface driver catc
- <6>[ 0.893959] usbcore: registered new interface driver kaweth
- <6>[ 0.893973] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- <6>[ 0.894010] usbcore: registered new interface driver pegasus
- <6>[ 0.894045] usbcore: registered new interface driver rtl8150
- <6>[ 0.894081] usbcore: registered new interface driver r8152
- <6>[ 0.894092] hso: drivers/net/usb/hso.c: Option Wireless
- <6>[ 0.894161] usbcore: registered new interface driver hso
- <6>[ 0.894209] usbcore: registered new interface driver asix
- <6>[ 0.894247] usbcore: registered new interface driver ax88179_178a
- <6>[ 0.894284] usbcore: registered new interface driver cdc_ether
- <6>[ 0.894320] usbcore: registered new interface driver cdc_eem
- <6>[ 0.894355] usbcore: registered new interface driver dm9601
- <6>[ 0.894390] usbcore: registered new interface driver dm9620
- <6>[ 0.894445] usbcore: registered new interface driver smsc75xx
- <6>[ 0.894491] usbcore: registered new interface driver smsc95xx
- <6>[ 0.894528] usbcore: registered new interface driver gl620a
- <6>[ 0.894564] usbcore: registered new interface driver net1080
- <6>[ 0.894599] usbcore: registered new interface driver plusb
- <6>[ 0.894635] usbcore: registered new interface driver rndis_host
- <6>[ 0.894671] usbcore: registered new interface driver cdc_subset
- <6>[ 0.894711] usbcore: registered new interface driver zaurus
- <6>[ 0.894749] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- <6>[ 0.894806] usbcore: registered new interface driver int51x1
- <6>[ 0.894843] usbcore: registered new interface driver kalmia
- <6>[ 0.894880] usbcore: registered new interface driver ipheth
- <6>[ 0.894922] usbcore: registered new interface driver sierra_net
- <6>[ 0.894959] usbcore: registered new interface driver cx82310_eth
- <6>[ 0.895009] usbcore: registered new interface driver cdc_ncm
- <6>[ 0.895047] usbcore: registered new interface driver qmi_wwan
- <6>[ 0.895085] usbcore: registered new interface driver cdc_mbim
- <6>[ 0.895097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <4>[ 0.897451] ehci_rk_probe e1680000 e1680010
- <6>[ 0.897468] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
- <6>[ 0.897498] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
- <6>[ 0.897794] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
- <6>[ 0.911485] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
- <6>[ 0.911573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.911590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.911605] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
- <6>[ 0.911619] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
- <6>[ 0.911632] usb usb1: SerialNumber: ff500000.usb
- <6>[ 0.912011] hub 1-0:1.0: USB hub found
- <6>[ 0.912036] hub 1-0:1.0: 1 port detected
- <4>[ 0.940993] ehci_rk_probe ok
- <6>[ 0.941124] usbcore: registered new interface driver cdc_acm
- <6>[ 0.941137] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.941190] usbcore: registered new interface driver usblp
- <6>[ 0.941230] usbcore: registered new interface driver cdc_wdm
- <6>[ 0.941294] usbcore: registered new interface driver usb-storage
- <6>[ 0.941333] usbcore: registered new interface driver ums-alauda
- <6>[ 0.941369] usbcore: registered new interface driver ums-cypress
- <6>[ 0.941405] usbcore: registered new interface driver ums-datafab
- <6>[ 0.941440] usbcore: registered new interface driver ums_eneub6250
- <6>[ 0.941476] usbcore: registered new interface driver ums-freecom
- <6>[ 0.941512] usbcore: registered new interface driver ums-isd200
- <6>[ 0.941548] usbcore: registered new interface driver ums-jumpshot
- <6>[ 0.941583] usbcore: registered new interface driver ums-karma
- <6>[ 0.941620] usbcore: registered new interface driver ums-onetouch
- <6>[ 0.941661] usbcore: registered new interface driver ums-sddr09
- <6>[ 0.941699] usbcore: registered new interface driver ums-sddr55
- <6>[ 0.941736] usbcore: registered new interface driver ums-usbat
- <6>[ 0.941825] usbcore: registered new interface driver usbserial
- <6>[ 0.941866] usbcore: registered new interface driver usbserial_generic
- <6>[ 0.941897] usbserial: USB Serial support registered for generic
- <6>[ 0.941935] usbcore: registered new interface driver option
- <6>[ 0.941965] usbserial: USB Serial support registered for GSM modem (1-port)
- <6>[ 0.942038] usbcore: registered new interface driver trancevibrator
- <6>[ 0.942051] usb20_otg: version 3.10a 21-DEC-2012
- <4>[ 0.942382] e1700040
- <4>[ 0.942396] Core Release: 3.10a
- <4>[ 0.942412] Setting default values for core params
- <4>[ 0.942546] Using Buffer DMA mode
- <4>[ 0.942559] Periodic Transfer Interrupt Enhancement - disabled
- <4>[ 0.942570] Multiprocessor Interrupt Enhancement - disabled
- <4>[ 0.942581] OTG VER PARAM: 0, OTG VER FLAG: 0
- <4>[ 0.942592] ^^^^^^^^^^^^^^^^^Device Mode
- <4>[ 0.942605] Dedicated Tx FIFOs mode
- <4>[ 0.942623] pcd_init otg_dev = c592b400
- <6>[ 0.942778] usb20_otg ff580000.usb: DWC OTG Controller
- <6>[ 0.942808] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
- <6>[ 0.942839] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
- <6>[ 0.942894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.942911] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.942925] usb usb2: Product: DWC OTG Controller
- <6>[ 0.942939] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
- <6>[ 0.942952] usb usb2: SerialNumber: ff580000.usb
- <6>[ 0.943336] hub 2-0:1.0: USB hub found
- <6>[ 0.943358] hub 2-0:1.0: 1 port detected
- <6>[ 0.943625] usb20_host: version 3.10a 21-DEC-2012
- <4>[ 0.946027] e1780040
- <4>[ 0.946040] Core Release: 3.10a
- <4>[ 0.946052] Setting default values for core params
- <4>[ 0.946185] Using Buffer DMA mode
- <4>[ 0.946197] Periodic Transfer Interrupt Enhancement - disabled
- <4>[ 0.946208] Multiprocessor Interrupt Enhancement - disabled
- <4>[ 0.946220] OTG VER PARAM: 0, OTG VER FLAG: 0
- <4>[ 0.946230] ^^^^^^^^^^^^^^^^^^Host Mode
- <6>[ 0.946258] usb20_host ff540000.usb: DWC OTG Controller
- <6>[ 0.946285] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
- <6>[ 0.946314] usb20_host ff540000.usb: irq 57, io mem 0x00000000
- <4>[ 0.946406] Init: Power Port (0)
- <6>[ 0.946463] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.946480] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.946494] usb usb3: Product: DWC OTG Controller
- <6>[ 0.946507] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
- <6>[ 0.946521] usb usb3: SerialNumber: ff540000.usb
- <6>[ 0.946893] hub 3-0:1.0: USB hub found
- <6>[ 0.946915] hub 3-0:1.0: 1 port detected
- <7>[ 0.947609] of_get_named_gpio_flags exited with status 6
- <6>[ 0.947809] usbcore: registered new interface driver xpad
- <6>[ 0.947858] usbcore: registered new interface driver usb_acecad
- <6>[ 0.947907] usbcore: registered new interface driver aiptek
- <6>[ 0.947949] usbcore: registered new interface driver gtco
- <6>[ 0.947992] usbcore: registered new interface driver hanwang
- <6>[ 0.948032] usbcore: registered new interface driver kbtab
- <6>[ 0.948079] usbcore: registered new interface driver wacom
- <4>[ 0.948209] ___vtl_ts_probe() end____
- <4>[ 0.948217] the screen_x is 1536 , screen_y is 2048
- <7>[ 0.948229] of_get_named_gpio_flags exited with status 230
- <7>[ 0.948237] of_get_named_gpio_flags exited with status 229
- <4>[ 0.948502] sensor_register_slave:mma8452,id=17
- <4>[ 0.948516] sensor_register_slave:ewtsa,id=41
- <6>[ 0.948658] i2c /dev entries driver
- <6>[ 0.949276] IR NEC protocol handler initialized
- <6>[ 0.949289] IR RC5(x) protocol handler initialized
- <6>[ 0.949300] IR RC6 protocol handler initialized
- <6>[ 0.949310] IR JVC protocol handler initialized
- <6>[ 0.949320] IR Sony protocol handler initialized
- <6>[ 0.949330] IR RC5 (streamzap) protocol handler initialized
- <6>[ 0.949341] IR SANYO protocol handler initialized
- <6>[ 0.949351] IR MCE Keyboard/mouse protocol handler initialized
- <4>[ 0.949364] CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
- <4>[ 0.950334] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
- <4>[ 0.950468] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xe16a8000 size: 0x4000)
- <4>[ 0.951083] D1:camsys_platform_probe(1153): ff910000.isp memory:
- <4>[ 0.951101] D1:camsys_platform_probe(1163): Register memory (phy: 0xff910000 vir: 0xe16c0000 size: 0x10000)
- <4>[ 0.951119] D1:camsys_platform_probe(1158): I2c memory (phy: 0x5980000 vir: 0xc5980000 size: 0x1000)
- <4>[ 0.951134] D1:camsys_platform_probe(1178): Probe ff910000.isp device success
- <4>[ 0.951394] rockchip_temp_probe,line=361
- <6>[ 1.009871] tsadc ff280000.tsadc: initialized
- <6>[ 1.010232] device-mapper: uevent: version 1.0.3
- <6>[ 1.010446] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- <6>[ 1.010623] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.010637] Bluetooth: HCI H4 protocol initialized
- <4>[ 1.014268] cpufreq version 1.0, suspend freq 816 MHz
- <6>[ 1.014451] cpuidle: using governor ladder
- <6>[ 1.014464] cpuidle: using governor menu
- <6>[ 1.014499] Synopsys Designware Multimedia Card Interface Driver
- <6>[ 1.014728] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
- <6>[ 1.015068] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
- <4>[ 1.015205] 3166..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
- <4>[ 1.015220] Line3171..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
- <7>[ 1.015243] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 1.015342] 1350..dw_mci_set_ios: no card. [mmc0]
- <4>[ 1.029558] 1350..dw_mci_set_ios: no card. [mmc0]
- <4>[ 1.039450] dwc_otg_hcd_suspend, usb device mode
- <4>[ 1.049331] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
- <6>[ 1.049343] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
- <6>[ 1.049354] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
- <6>[ 1.049619] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
- <6>[ 1.050632] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
- <4>[ 1.050744] 3160..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
- <7>[ 1.050779] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 1.051317] 1350..dw_mci_set_ios: no card. [mmc1]
- <4>[ 1.068920] 1350..dw_mci_set_ios: no card. [mmc1]
- <6>[ 1.081373] mmc0: BKOPS_EN bit is not set
- <6>[ 1.082636] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
- <4>[ 1.082658] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
- <4>[ 1.082724] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
- <6>[ 1.082820] mmc0: new high speed MMC card at address 0001
- <6>[ 1.083054] mmcblk0: mmc0:0001 MBG4GA 29.1 GiB
- <6>[ 1.083314] uboot: 0x000400000 -- 0x000800000 (4 MB)
- <6>[ 1.083326] misc: 0x000800000 -- 0x000c00000 (4 MB)
- <6>[ 1.083336] resource: 0x000c00000 -- 0x001c00000 (16 MB)
- <6>[ 1.083344] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
- <6>[ 1.083353] boot: 0x002c00000 -- 0x004c00000 (32 MB)
- <6>[ 1.083362] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
- <6>[ 1.083371] backup: 0x006c00000 -- 0x00a000000 (52 MB)
- <6>[ 1.083379] cache: 0x00a000000 -- 0x012000000 (128 MB)
- <6>[ 1.083388] kpanic: 0x012000000 -- 0x012400000 (4 MB)
- <6>[ 1.083396] system: 0x012400000 -- 0x03ca00000 (678 MB)
- <6>[ 1.083405] metadata: 0x03ca00000 -- 0x03ce00000 (4 MB)
- <6>[ 1.083413] userdata: 0x03ce00000 -- 0x13ce00000 (4096 MB)
- <6>[ 1.083422] user: 0x13ce00000 -- 0x747800000 (24746 MB)
- <6>[ 1.083444] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p131350..dw_mci_set_ios: no card. [mmc1]
- <6>[ 1.088708] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
- <6>[ 1.088721] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
- <6>[ 1.088985] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
- <6>[ 1.089165] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
- <4>[ 1.089276] 3166..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
- <7>[ 1.089295] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 1.089352] 1350..dw_mci_set_ios: no card. [mmc2]
- <4>[ 1.108272] 1350..dw_mci_set_ios: no card. [mmc2]
- <4>[ 1.127970] 1350..dw_mci_set_ios: no card. [mmc2]
- <6>[ 1.128132] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
- <6>[ 1.128144] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
- <6>[ 1.128378] hidraw: raw HID events driver (C) Jiri Kosina
- <6>[ 1.129611] usbcore: registered new interface driver usbhid
- <6>[ 1.129621] usbhid: USB HID core driver
- <6>[ 1.129871] ashmem: initialized
- <6>[ 1.129984] logger: created 256K log 'log_main'
- <6>[ 1.130082] logger: created 256K log 'log_events'
- <6>[ 1.130174] logger: created 256K log 'log_radio'
- <6>[ 1.130265] logger: created 256K log 'log_system'
- <7>[ 1.130392] of_get_named_gpio_flags exited with status 245
- <7>[ 1.131063] of_get_named_gpio_flags exited with status 5
- <7>[ 1.131073] of_get_named_gpio_flags exited with status 5
- <6>[ 1.131275] input: rk29-keypad as /devices/ff100000.adc/key.35/input/input1
- <6>[ 1.131625] usbcore: registered new interface driver snd-usb-audio
- <7>[ 1.132183] of_get_named_gpio_flags exited with status 239
- <6>[ 1.165405] rockchip-rt5616 rockchip-rt5616.32: rt5616-aif1 <-> rockchip-i2s.0 mapping ok
- <6>[ 1.166428] rockchip-hdmi-i2s rockchip-hdmi-i2s.30: rk-hdmi-i2s-hifi <-> rockchip-i2s.0 mapping ok
- <6>[ 1.166808] u32 classifier
- <6>[ 1.166816] Actions configured
- <6>[ 1.166828] Netfilter messages via NETLINK v0.30.
- <6>[ 1.166878] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 1.167183] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.167245] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.167255] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.167629] xt_time: kernel timezone is -0000
- <6>[ 1.167856] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.168015] arp_tables: (C) 2002 David S. Miller
- <6>[ 1.168051] TCP: cubic registered
- <6>[ 1.168059] Initializing XFRM netlink socket
- <6>[ 1.168317] NET: Registered protocol family 10
- <6>[ 1.169018] mip6: Mobile IPv6
- <6>[ 1.169039] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.169139] sit: IPv6 over IPv4 tunneling driver
- <6>[ 1.169405] NET: Registered protocol family 17
- <6>[ 1.169424] NET: Registered protocol family 15
- <5>[ 1.169466] Bridge firewalling registered
- <6>[ 1.169476] Ebtables v2.0 registered
- <6>[ 1.169601] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.169622] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.169629] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.169635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.169641] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.169651] Bluetooth: BNEP socket layer initialized
- <6>[ 1.169658] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.169667] Bluetooth: HIDP socket layer initialized
- <6>[ 1.169688] l2tp_core: L2TP core driver, V2.0
- <6>[ 1.169699] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- <6>[ 1.169705] [WLAN_RFKILL]: Enter rfkill_wlan_init
- <6>[ 1.169842] [WLAN_RFKILL]: Enter rfkill_wlan_probe
- <6>[ 1.169851] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
- <6>[ 1.169859] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
- <7>[ 1.169870] of_get_named_gpio_flags exited with status 156
- <6>[ 1.169876] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
- <7>[ 1.169883] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.169889] of_get_named_gpio_flags exited with status 158
- <6>[ 1.169894] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
- <6>[ 1.169903] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
- <6>[ 1.169921] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
- <6>[ 1.169956] [WLAN_RFKILL]: Exit rfkill_wlan_probe
- <6>[ 1.169991] [BT_RFKILL]: Enter rfkill_rk_init
- <7>[ 1.170088] of_get_named_gpio_flags exited with status 147
- <6>[ 1.170095] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
- <7>[ 1.170104] of_get_named_gpio_flags exited with status 155
- <6>[ 1.170109] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
- <7>[ 1.170117] of_get_named_gpio_flags exited with status 157
- <6>[ 1.170122] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
- <7>[ 1.170130] of_get_named_gpio_flags exited with status 154
- <6>[ 1.170135] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
- <7>[ 1.170142] of_get_named_gpio_flags exited with status 159
- <6>[ 1.170147] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
- <6>[ 1.170183] [BT_RFKILL]: Request irq for bt wakeup host
- <6>[ 1.170259] [BT_RFKILL]: ** disable irq
- <6>[ 1.170333] [BT_RFKILL]: ap6330 device registered.
- <6>[ 1.170656] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
- <4>[ 1.170673] rk3288_init_suspend
- <4>[ 1.170680] rk3288_suspend_init enter
- <4>[ 1.170810] rk3288_suspend_init: pm_ctrbits =200007
- <4>[ 1.170837] gpio_get_dts_info suspend:4
- <4>[ 1.170844] gpio_get_dts_info resume:4
- <4>[ 1.170849] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- <4>[ 1.170875] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- <4>[ 1.170992] clks_gating_suspend_init:clkgt info ok
- <5>[ 1.171061] Registering SWP/SWPB emulation handler
- <6>[ 1.171361] ddrfreq: verion 1.2 20140526
- <6>[ 1.171372] ddrfreq: normal 396MHz video_1080p 0MHz video_4k 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 396MHz
- <6>[ 1.171379] ddrfreq: auto-freq=0
- <6>[ 1.171385] ddrfreq: auto-freq-table[0] 324MHz
- <6>[ 1.171390] ddrfreq: auto-freq-table[1] 396MHz
- <6>[ 1.171396] ddrfreq: auto-freq-table[2] 492MHz
- <7>[ 1.184928] ddrfreq: change freq to 396 MHz when normal
- <6>[ 1.185274] regulator-dummy: disabling
- <4>[ 1.185495] pcd_pullup, is_on 0
- <6>[ 1.185531] file system registered
- <6>[ 1.186079] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.186088] android_usb gadget: Number of LUNs=2
- <6>[ 1.186095] lun0: LUN: removable file: (no medium)
- <6>[ 1.186102] lun1: LUN: removable file: (no medium)
- <6>[ 1.186223] android_usb gadget: android_usb ready
- <6>[ 1.186304] i2c i2c-1: sensor_probe: gs_mma8452,0xdd6eac00
- <7>[ 1.186318] of_get_named_gpio_flags exited with status 256
- <7>[ 1.186324] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.186328] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.186333] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 1.186343] sensor_chip_init:gs_mma8452:devid=0x0,ops=0xc0d1f538
- <6>[ 1.188072] input: gsensor as /devices/ff140000.i2c/i2c-1/1-001d/input/input2
- <4>[ 1.188336] sensor_misc_device_register:miscdevice: mma8452_daemon
- <4>[ 1.188345] sensor_probe:initialized ok,sensor name:mma8452,type:2,id=17
- <4>[ 1.188345]
- <6>[ 1.188391] i2c i2c-1: sensor_probe: ak8963,0xdd6eae00
- <7>[ 1.188402] of_get_named_gpio_flags exited with status 257
- <7>[ 1.188407] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.188412] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.188416] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 1.188423] sensor_chip_init:ops is null,sensor name is ak8963
- <3>[ 1.188431] i2c i2c-1: sensor_probe failed -1
- <3>[ 1.188431]
- <4>[ 1.188444] sensors: probe of 1-000d failed with error -1
- <6>[ 1.188471] i2c i2c-1: sensor_probe: ewtsa_gyro,0xdd6eb000
- <7>[ 1.188480] of_get_named_gpio_flags exited with status 258
- <7>[ 1.188485] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.188490] of_get_named_gpio_flags: can't parse gpios property
- <7>[ 1.188495] of_get_named_gpio_flags exited with status 265
- <4>[ 1.188504] sensor_chip_init:ewtsa_gyro:devid=0x0,ops=0xc0d1f594
- <6>[ 1.246096] input: gyro as /devices/ff140000.i2c/i2c-1/1-0069/input/input3
- <4>[ 1.246326] sensor_misc_device_register:miscdevice: gyrosensor
- <4>[ 1.246334] sensor_probe:initialized ok,sensor name:ewtsa,type:4,id=41
- <4>[ 1.246334]
- <6>[ 1.246375] sensor_init: Probe name sensors
- <4>[ 1.246390] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
- <6>[ 1.247360] ricoh619-rtc ricoh619-rtc: PMU: print_time *** rtc-time : 6/18/2017 11:58:31 *****
- <6>[ 1.247381] ricoh619-rtc ricoh619-rtc: setting system clock to 2017-06-18 11:58:31 UTC (1497787111)
- <7>[ 1.253048] of_get_named_gpio_flags exited with status 231
- <7>[ 1.253065] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 1.253134] rockchip_headset_probe() headset have hook adc mode
- <6>[ 1.253255] input: rockchip_headset.34 as /devices/ff100000.adc/rockchip_headset.34/input/input4
- <6>[ 1.253764] ALSA device list:
- <6>[ 1.253771] #0: RK_RT5616
- <6>[ 1.253777] #1: RK-HDMI-I2S
- <6>[ 1.255274] Freeing unused kernel memory: 3408K (c097f000 - c0cd3000)
- <4>[ 1.324781] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
- <4>[ 1.364748] mmc1: Skipping voltage switch
- <6>[ 1.393144] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- <4>[ 1.393169] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]
- <4>[ 1.393238] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]
- <6>[ 1.393249] mmc1: new high speed SDHC card at address 1234
- <6>[ 1.393529] mmcblk1: mmc1:1234 SA32G 28.9 GiB
- <6>[ 1.394644] mmcblk1: p1
- <4>[ 1.511719] ___chip ID = 1___cnt = 0
- <11>[ 1.597199] init: could not import file '/init.usbstorage.rc' from '/init.rc'
- <4>[ 1.597283] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <11>[ 1.627571] init: /dev/hw_random not found
- <6>[ 1.627623] keychord: using input dev ricoh619_pwrkey for fevent
- <6>[ 1.627632] keychord: using input dev rk29-keypad for fevent
- <11>[ 1.630349] fs_mgr: parse_link_device : path = NULL
- <11>[ 1.630374] fs_mgr: parse_link_device : path = NULL
- <11>[ 1.630392] fs_mgr: parse_link_device : path = NULL
- <14>[ 1.630421] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
- <14>[ 1.631163] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 173568 blocks long. Nothing to do!resize2fs:
- <6>[ 1.640300] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 1.643941] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
- <4>[ 1.645321] EXT4-fs (mmcblk0p11): warning: mounting unchecked fs, running e2fsck is recommended
- <6>[ 1.647142] EXT4-fs (mmcblk0p11): mounted filesystem without journal. Opts: noauto_da_alloc,discard
- <7>[ 1.656640] EXT4-fs (mmcblk0p12): ext4_orphan_cleanup: deleting unreferenced inode 745
- <6>[ 1.657028] EXT4-fs (mmcblk0p12): 1 orphan inode deleted
- <6>[ 1.657036] EXT4-fs (mmcblk0p12): recovery complete
- <6>[ 1.669849] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
- <4>[ 1.684882] mali pd enabled
- <4>[ 1.684896] clk enabled
- <4>[ 1.684915] MALI_DVFS_STEP=5,div_dvfs=7
- <4>[ 1.684921] mali_dvfs_infotbl[0].clock=99000,min_threshold=0,max_threshold=70
- <4>[ 1.684928] mali_dvfs_infotbl[1].clock=198000,min_threshold=65,max_threshold=77
- <4>[ 1.684936] mali_dvfs_infotbl[2].clock=297000,min_threshold=75,max_threshold=84
- <4>[ 1.684942] mali_dvfs_infotbl[3].clock=313000,min_threshold=88,max_threshold=91
- <4>[ 1.684949] mali_dvfs_infotbl[4].clock=480000,min_threshold=88,max_threshold=100
- <3>[ 1.685057] turn on mali power
- <6>[ 1.685082] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
- <6>[ 1.685427] mali ffa30000.gpu: Probed as mali0
- <3>[ 1.686717] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
- <11>[ 1.695773] init: /dev/hw_random not found
- <6>[ 1.702886] binder: 134:134 transaction failed 29189, size 0-0
- <11>[ 1.706129] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
- <11>[ 1.707128] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
- <11>[ 1.711306] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
- <11>[ 1.711927] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
- <11>[ 1.711943] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
- <11>[ 1.712089] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
- <6>[ 1.809556] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
- <6>[ 1.895079] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <11>[ 2.058015] fs_mgr: parse_link_device : path = NULL
- <11>[ 2.058048] fs_mgr: parse_link_device : path = NULL
- <11>[ 2.058068] fs_mgr: parse_link_device : path = NULL
- <6>[ 2.059444] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 2.090593] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <11>[ 2.092672] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
- <11>[ 2.092690] init: powerctl: cannot expand '${sys.powerctl}'
- <11>[ 2.092703] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
- <11>[ 2.092738] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
- <11>[ 2.092831] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
- <11>[ 2.092843] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
- <3>[ 2.093315] android_usb: already disabled
- <6>[ 2.103704] read descriptors
- <6>[ 2.103720] read strings
- <4>[ 2.103752] pcd_pullup, is_on 1
- <4>[ 2.640827] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
- <4>[ 2.640840] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
- <4>[ 2.640848] D1:camsys_open(716): camsys_marvin(dd68ce10) is opened!
- <4>[ 2.640890] D1:camsys_extdev_register(230): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
- <4>[ 2.640902] D1:camsys_extdev_register(230): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
- <4>[ 2.640914] D1:camsys_extdev_register(230): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
- <4>[ 2.640922] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
- <4>[ 2.640936] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000 dev_name: OV8825) register success
- <4>[ 2.645974] D1:camsys_mrv_clkin_cb(345): camsys_marvin clock(f: 210000000 Hz) in turn on
- <4>[ 2.645984] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
- <4>[ 2.646088] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
- <4>[ 2.646114] D1:camsys_mrv_clkout_cb(380): camsys_marvin clock out(rate: 24000000Hz) turn on
- <4>[ 2.647178] D1:camsys_sysctl_extdev(327): Sysctl 11 success, gpio(17) set 1
- <4>[ 2.648242] D1:camsys_sysctl_extdev(331): Sysctl 8 success, gpio(78) set 1
- <4>[ 2.649297] D1:camsys_sysctl_extdev(331): Sysctl 7 success, gpio(79) set 1
- <4>[ 2.653308] D1:camsys_sysctl_extdev(327): Sysctl 7 success, gpio(79) set 0
- <4>[ 2.653323] D1:camsys_sysctl_extdev(327): Sysctl 8 success, gpio(78) set 0
- <4>[ 2.653334] D1:camsys_sysctl_extdev(331): Sysctl 11 success, gpio(17) set 0
- <4>[ 2.654413] D1:camsys_mrv_clkin_cb(362): camsys_marvin clock in turn off
- <4>[ 2.654441] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out turn off
- <4>[ 2.656484] D1:camsys_irq_disconnect(641): All thread disconnect camsys_marvin irq success!
- <4>[ 2.656494] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
- <4>[ 2.656501] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
- <4>[ 2.656509] D1:camsys_release(740): camsys_marvin(dd68ce10) is closed
- <4>[ 2.723102] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
- <4>[ 2.723116] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
- <4>[ 2.723125] D1:camsys_open(716): camsys_marvin(dd68ce10) is opened!
- <7>[ 2.723168] _gpio_request: gpio-78 (camsys_gpio) status -16
- <3>[ 2.723173] E:camsys_extdev_register(226): Request RK30_PIN2_PB6(78) failed
- <4>[ 2.723181] D1:camsys_extdev_register(230): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
- <7>[ 2.723190] _gpio_request: gpio-17 (camsys_gpio) status -16
- <3>[ 2.723195] E:camsys_extdev_register(226): Request RK30_PIN0_PC1(17) failed
- <4>[ 2.723203] D1:camsys_extdev_register(230): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
- <4>[ 2.723212] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
- <4>[ 2.723307] D1:camsys_extdev_register(255): Extdev(dev_id: 0x1000000 dev_name: OV2659) register success
- <4>[ 2.728347] D1:camsys_mrv_clkin_cb(345): camsys_marvin clock(f: 210000000 Hz) in turn on
- <4>[ 2.728356] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
- <4>[ 2.728460] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
- <4>[ 2.728488] D1:camsys_mrv_clkout_cb(380): camsys_marvin clock out(rate: 24000000Hz) turn on
- <4>[ 2.729551] D1:camsys_sysctl_extdev(327): Sysctl 11 success, gpio(17) set 1
- <3>[ 2.730604] E:camsys_sysctl_extdev(334): Sysctl 8 failed, because gpio is NULL!
- <4>[ 2.731659] D1:camsys_sysctl_extdev(331): Sysctl 7 success, gpio(78) set 0
- <4>[ 2.735647] D1:camsys_sysctl_extdev(327): Sysctl 7 success, gpio(78) set 1
- <3>[ 2.735657] E:camsys_sysctl_extdev(334): Sysctl 8 failed, because gpio is NULL!
- <4>[ 2.735669] D1:camsys_sysctl_extdev(331): Sysctl 11 success, gpio(17) set 0
- <4>[ 2.736744] D1:camsys_mrv_clkin_cb(362): camsys_marvin clock in turn off
- <4>[ 2.736766] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out turn off
- <4>[ 2.738812] D1:camsys_irq_disconnect(641): All thread disconnect camsys_marvin irq success!
- <4>[ 2.738824] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
- <4>[ 2.738831] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
- <4>[ 2.738838] D1:camsys_release(740): camsys_marvin(dd68ce10) is closed
- <4>[ 2.781102] bin_checksum = 0xf0d6,fw_checksum = 0xf0d6
- <6>[ 2.781251] input: vtl_ts as /devices/virtual/input/input5
- <6>[ 2.781393] gpufreq_input_connect
- <6>[ 3.423021] rk3288-lcdc lcdc0: blank mode:0
- <11>[ 3.687748] init: sys_prop: permission denied uid:1003 name:sys.gmali.version
- <11>[ 7.079689] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
- <6>[ 7.228906] e243d234,e243d234,e243d234
- <6>[ 11.524920] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
- <6>[ 11.524947] lowmemorykiller: oom_adj 0 => oom_score_adj 0
- <6>[ 11.524956] lowmemorykiller: oom_adj 1 => oom_score_adj 58
- <6>[ 11.524965] lowmemorykiller: oom_adj 2 => oom_score_adj 117
- <6>[ 11.524973] lowmemorykiller: oom_adj 3 => oom_score_adj 176
- <6>[ 11.524980] lowmemorykiller: oom_adj 9 => oom_score_adj 529
- <6>[ 11.524988] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
- <6>[ 11.875509] acc_open
- <6>[ 11.875539] acc_release
- <4>[ 11.920183] wifi_driver_write: wifi driver already rmmod
- <3>[ 12.114932] FAT-fs (mmcblk1p1): bogus number of reserved sectors
- <6>[ 12.119255] FAT-fs (mmcblk1p1): Can't find a valid FAT filesystem
- <4>[ 12.211493] dwc_otg_hcd_resume, usb device mode
- <4>[ 12.211593] dwc_otg_hcd_suspend, usb device mode
- <11>[ 12.279766] init: no such service 'fuse_external_sd'
- <4>[ 13.123106] FAT-fs (mmcblk0p13): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- <11>[ 13.412843] init: sys_prop: permission denied uid:10012 name:sys.gmali.version
- <11>[ 13.481322] init: no such service 'fuse_internal_sd'
- <11>[ 14.922055] init: sys_prop: permission denied uid:10070 name:sys.gmali.version
- <4>[ 16.734276] *****************vbus detect*******************
- <4>[ 16.913620] Using Buffer DMA mode
- <4>[ 16.913654] Periodic Transfer Interrupt Enhancement - disabled
- <4>[ 16.913665] Multiprocessor Interrupt Enhancement - disabled
- <4>[ 16.913675] OTG VER PARAM: 0, OTG VER FLAG: 0
- <4>[ 16.913686] ^^^^^^^^^^^^^^^^^Device Mode
- <4>[ 16.913733] *******************soft connect!!!*******************
- <4>[ 17.012562] USB RESET
- <6>[ 17.099034] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 17.116040] android_usb gadget: high-speed config #1: android
- <6>[ 17.116496] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 23.627892] rk3288-lcdc lcdc0: blank mode:4
- <6>[ 25.104136] rk32-edp rk32-edp: edp pll locked
- <6>[ 25.116753] rk32-edp rk32-edp: max link rate:1.62Gps max number of lanes:4
- <6>[ 25.118801] rk32-edp rk32-edp: link training success.
- <6>[ 25.176085] rk3288-lcdc lcdc0: blank mode:0
- <6>[ 27.079228] rk3288-lcdc lcdc0: blank mode:4
- <6>[ 28.549982] rk32-edp rk32-edp: edp pll locked
- <6>[ 28.563607] rk32-edp rk32-edp: max link rate:1.62Gps max number of lanes:4
- <6>[ 28.565609] rk32-edp rk32-edp: link training success.
- <6>[ 28.623853] rk3288-lcdc lcdc0: blank mode:0
- <6>[ 31.166521] rk3288-lcdc lcdc0: blank mode:4
- <6>[ 32.076339] rk32-edp rk32-edp: edp pll locked
- <6>[ 32.090300] rk32-edp rk32-edp: max link rate:1.62Gps max number of lanes:4
- <6>[ 32.092299] rk32-edp rk32-edp: link training success.
- <6>[ 32.150553] rk3288-lcdc lcdc0: blank mode:0
- <6>[ 33.080471] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 33.084735] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 33.088945] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 33.174545] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 33.193838] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 33.197296] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 33.296754] binder: undelivered transaction 15334
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement