K&N Typhoon Cold Air intake Evo X

2020-01-21 16:08:50 ★ Jayden Hudson Reaches inside as he pulls the hood latch.
2020-01-21 16:08:53 ★ The hood would pop up      ((Jayden Hudson))
2020-01-21 16:09:12 ★ Jayden Hudson Pushes the little button under the hood, As he lifts up the hood, Placing the stick under it
2020-01-21 16:09:18 ★ The hood would remain open.      ((Jayden Hudson))
2020-01-21 16:09:34 ★ Jayden Hudson Walks over to the tool cart as he grabs a Ratchet And a 10mm Socket.
2020-01-21 16:09:55 ★ Jayden Hudson Places the socket onto the ratchet as he walks over to the engine bay
2020-01-21 16:10:11 ★ Jayden Hudson Bends over into the hood as he unbolts the Negative pole on the battery
2020-01-21 16:10:22 ★ After unbolting it, The negative pole would come off.      ((Jayden Hudson))
2020-01-21 16:10:30 ★ Jayden Hudson Grabs the negative pole as he places it aside,
2020-01-21 16:10:49 ★ Jayden Hudson Starts to unrachet the Plus Pole
2020-01-21 16:11:02 ★ After unbolting the pole bolt, The plus pole comes off.      ((Jayden Hudson))
2020-01-21 16:11:26 ★ Jayden Hudson Places the pole away from the battery, As he walks over to the toolcart Taking out a -
2020-01-21 16:11:35 ★ Rachet extension, As he pushes the socket onto it      ((Jayden Hudson))
2020-01-21 16:12:00 ★ Jayden Hudson Places the ratchet aside, as he looks for the clips on the Air filter box
2020-01-21 16:12:20 ★ After looking a little bit, He'd locate all 4 clips on the Air filter Top cover,      ((Jayden Hudson))
2020-01-21 16:12:45 ★ Jayden Hudson Starts to unclamp all of the four clips, As he grabs the cover off, Placing it infront of -
2020-01-21 16:12:46 ★ vehicle      ((Jayden Hudson))
2020-01-21 16:13:17 ★ Jayden Hudson bends up, Leaning back into the engine bay, As he pulls out to airfilter tossing it aside
2020-01-21 16:13:33 ★ When the airfilter is removed, There would be four 10MM Bolts visible.      ((Jayden Hudson))
2020-01-21 16:13:55 ★ Jayden Hudson Reaches out to the ratchet, As he places it onto the bolts in the air filter holding box
2020-01-21 16:14:19 ★ After a few minutes, The filterbox would come lose,      ((Jayden Hudson))
2020-01-21 16:14:35 ★ Jayden Hudson Places the ratchet aside and grabs the box pulling up wards, Tossing it aside.
2020-01-21 16:15:02 ★ The Filter box would be removed from the engine bay      ((Jayden Hudson))
2020-01-21 16:15:19 ★ Jayden Hudson Reaches into the engine bay further, As he'd search for the sensors on the air filter tubing
2020-01-21 16:15:32 ★ He'd locate two Sensors.      ((Jayden Hudson))
2020-01-21 16:15:53 ★ Jayden Hudson Grabs thight onto the sensor as he pushes it in little plastic pieces as he pulls the sensor
2020-01-21 16:15:54 ★ Upwards.      ((Jayden Hudson))
2020-01-21 16:16:04 ★ Jayden Hudson Places it aside as he does the same for the other sensor
2020-01-21 16:16:37 ★ Jayden Hudson Walks over to the tool cart as he grabs a flathead screw driver,
2020-01-21 16:16:43 ★ Jayden Hudson Walks back over to the engine bay leaning into it
2020-01-21 16:17:25 ★ Jayden Hudson Places the flathead screwdriver onto the Hose clamp screw.
2020-01-21 16:17:42 ★ Jayden Hudson Starts to unthighten the bolt using the flathead screw driver.
2020-01-21 16:18:21 ★ The bolt would become lose, And so would the tubing.      ((Jayden Hudson))
2020-01-21 16:18:37 ★ Jayden Hudson Politly pulls off the tubing off of the intake,
2020-01-21 16:18:51 ★ Jayden Hudson Tosses the tubing aside as he wipes off his forehead.
2020-01-21 16:18:55 ★ He'd be a bit sweaty.      ((Jayden Hudson))
2020-01-21 16:19:17 ★ Jayden Hudson Bends over to the box next to him, As he reaches into his pocket grabbing out a -
2020-01-21 16:19:24 ★ Pocket knife as he cuts open the box.      ((Jayden Hudson))
2020-01-21 16:19:36 ★ the box would be open, And reveal a K&N Typhoon Air filter      ((Jayden Hudson))
2020-01-21 16:19:58 ★ Jayden Hudson Slides his pocket knife back into his pocket and than bends down grabbing the airfilter,
2020-01-21 16:20:20 ★ Jayden Hudson Slides the tubing over the intake, As he places a hose clamp onto the tubing-
2020-01-21 16:20:36 ★ Jayden Hudson Reaching out to his flathead screwdriver and starts to thighten the bolt of the clamp
2020-01-21 16:20:47 ★ After thightening the bolt down, The airfilter tubing would be in place.      ((Jayden Hudson))
2020-01-21 16:21:02 ★ Jayden Hudson Places the screwdriver aside, As he bends down grabbing the Air Filter Cone
2020-01-21 16:21:10 ★ Followed by a clamp      ((Jayden Hudson))
2020-01-21 16:21:31 ★ Jayden Hudson Slides the clamp over the tubing of the Air cone, Placing it into the tubing he just placed-
2020-01-21 16:21:37 ★ Onto the intake manifold      ((Jayden Hudson))
2020-01-21 16:22:12 ★ Jayden Hudson Holds the air filter cone with one hand using the otherone to reach for the screwdriver
2020-01-21 16:22:53 ★ Jayden Hudson As he starts to thighten down the bolt as he releases the cone.
2020-01-21 16:23:01 ★ the airfilter would be in place.      ((Jayden Hudson))
2020-01-21 16:23:42 ★ Jayden Hudson places his screw driver aside and tosses the ratchet aside, and pushes up the hood.
2020-01-21 16:24:19 ★ Jayden Hudson Pulling the little metal stick away from under the hood and tosses it aside.
2020-01-21 16:24:27 ★ Jayden Hudson Slowly lowers the hood and lets it fall shut.