API tools faq
paste
Advertisement
Guest User

WR703N boot fail

a guest
Mar 20th, 2012
247
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.26 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.4 (Sep 26 2011 - 11:13:45)
  2.  
  3. AP121-2MB (ar9330) U-boot
  4.  
  5. DRAM: 32 MB
  6. led turning on for 1s...
  7. id read 0x100000ff
  8. flash size 4194304, sector count = 64
  9. Flash: 4 MB
  10. Using default environment
  11.  
  12. In: serial
  13. Out: serial
  14. Err: serial
  15. Net: ag7240_enet_initialize...
  16. No valid address in Flash. Using fixed address
  17. No valid address in Flash. Using fixed address
  18. : cfg1 0x5 cfg2 0x7114
  19. eth0: 00:03:7f:xx:xx:xx
  20. ag7240_phy_setup
  21. eth0 up
  22. : cfg1 0xf cfg2 0x7214
  23. eth1: 00:03:7f:xx:xx:xx
  24. athrs26_reg_init_lan
  25. ATHRS26: resetting s26
  26. ATHRS26: s26 reset done
  27. ag7240_phy_setup
  28. eth1 up
  29. eth0, eth1
  30. Autobooting in 1 seconds
  31. ## Booting image at 9f020000 ...
  32. Uncompressing Kernel Image ... OK
  33.  
  34. Starting kernel ...
  35.  
  36. [ 0.000000] Linux version 3.2.9 (openwrt@OpenWRTBuild) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Mar 13 20:33:19 MST 2012
  37. [ 0.000000] bootconsole [early0] enabled
  38. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  39. [ 0.000000] SoC: Atheros AR9330 rev 1
  40. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  41. [ 0.000000] Determined physical RAM map:
  42. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  43. [ 0.000000] Initrd not found or empty - disabling initrd
  44. [ 0.000000] Zone PFN ranges:
  45. [ 0.000000] Normal 0x00000000 -> 0x00002000
  46. [ 0.000000] Movable zone start PFN for each node
  47. [ 0.000000] early_node_map[1] active PFN ranges
  48. [ 0.000000] 0: 0x00000000 -> 0x00002000
  49. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  50. [ 0.000000] Kernel command line: board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
  51. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  52. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  53. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  55. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  56. [ 0.000000] Writing ErrCtl register=00000000
  57. [ 0.000000] Readback ErrCtl register=00000000
  58. [ 0.000000] Memory: 29180k/32768k available (2171k kernel code, 3588k reserved, 409k data, 196k init, 0k highmem)
  59. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  60. [ 0.000000] NR_IRQS:48
  61. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  62. [ 0.080000] pid_max: default: 32768 minimum: 301
  63. [ 0.080000] Mount-cache hash table entries: 512
  64. [ 0.090000] NET: Registered protocol family 16
  65. [ 0.090000] MIPS: machine is TP-LINK TL-WR703N v1
  66. [ 0.330000] bio: create slab <bio-0> at 0
  67. [ 0.340000] Switching to clocksource MIPS
  68. [ 0.350000] NET: Registered protocol family 2
  69. [ 0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  70. [ 0.350000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  71. [ 0.360000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  72. [ 0.360000] TCP: Hash tables configured (established 1024 bind 1024)
  73. [ 0.370000] TCP reno registered
  74. [ 0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  75. [ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  76. [ 0.380000] NET: Registered protocol family 1
  77. [ 0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  78. [ 0.410000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  79. [ 0.420000] msgmni has been set to 56
  80. [ 0.430000] io scheduler noop registered
  81. [ 0.430000] io scheduler deadline registered (default)
  82. [ 0.430000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  83. [ 0.440000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
  84. [ 0.450000] console [ttyATH0] enabled, bootconsole disabled
  85. [ 0.450000] console [ttyATH0] enabled, bootconsole disabled
  86. [ 0.460000] m25p80 spi0.0: found s25sl032a, expected m25p80
  87. [ 0.470000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
  88. [ 0.470000] 5 tp-link partitions found on MTD device spi0.0
  89. [ 0.480000] Creating 5 MTD partitions on "spi0.0":
  90. [ 0.480000] 0x000000000000-0x000000020000 : "u-boot"
  91. [ 0.490000] 0x000000020000-0x0000001049a0 : "kernel"
  92. [ 0.490000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  93. [ 0.500000] 0x0000001049a0-0x0000003f0000 : "rootfs"
  94. [ 0.510000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  95. [ 0.520000] mtd: partition "rootfs" set to be root filesystem
  96. [ 0.530000] mtd: partition "rootfs_data" created automatically, ofs=270000, len=180000
  97. [ 0.530000] 0x000000270000-0x0000003f0000 : "rootfs_data"
  98. [ 0.540000] 0x0000003f0000-0x000000400000 : "art"
  99. [ 0.550000] 0x000000020000-0x0000003f0000 : "firmware"
  100. [ 0.800000] ag71xx_mdio: probed
  101. [ 0.800000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  102. [ 1.410000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  103. [ 1.410000] TCP westwood registered
  104. [ 1.420000] NET: Registered protocol family 17
  105. [ 1.420000] Bridge firewalling registered
  106. [ 1.420000] 8021q: 802.1Q VLAN Support v1.8
  107. [ 1.450000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  108. [ 1.450000] Freeing unused kernel memory: 196k freed
  109. [ 3.280000] SQUASHFS error: xz_dec_run error, data probably corrupt
  110. [ 3.280000] SQUASHFS error: squashfs_read_data failed to read block 0x54b5a
  111. [ 3.290000] SQUASHFS error: Unable to read data cache entry [54b5a]
  112. [ 3.290000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  113. [ 3.300000] SQUASHFS error: Unable to read data cache entry [54b5a]
  114. [ 3.310000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  115. [ 3.310000] SQUASHFS error: Unable to read data cache entry [54b5a]
  116. [ 3.320000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  117. [ 3.320000] SQUASHFS error: Unable to read data cache entry [54b5a]
  118. [ 3.330000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  119. [ 3.340000] SQUASHFS error: Unable to read data cache entry [54b5a]
  120. [ 3.340000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  121. [ 3.350000] SQUASHFS error: Unable to read data cache entry [54b5a]
  122. [ 3.360000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  123. [ 3.360000] SQUASHFS error: Unable to read data cache entry [54b5a]
  124. [ 3.370000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  125. [ 3.370000] SQUASHFS error: Unable to read data cache entry [54b5a]
  126. [ 3.380000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  127. [ 3.390000] SQUASHFS error: Unable to read data cache entry [54b5a]
  128. [ 3.390000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  129. [ 3.400000] SQUASHFS error: Unable to read data cache entry [54b5a]
  130. [ 3.400000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  131. [ 3.410000] SQUASHFS error: Unable to read data cache entry [54b5a]
  132. [ 3.420000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  133. [ 3.420000] SQUASHFS error: Unable to read data cache entry [54b5a]
  134. [ 3.430000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  135. [ 3.440000] SQUASHFS error: Unable to read data cache entry [54b5a]
  136. [ 3.440000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  137. [ 3.450000] SQUASHFS error: Unable to read data cache entry [54b5a]
  138. [ 3.450000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  139. [ 3.460000] SQUASHFS error: Unable to read data cache entry [54b5a]
  140. [ 3.470000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  141. [ 3.470000] SQUASHFS error: Unable to read data cache entry [54b5a]
  142. [ 3.480000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  143. [ 3.480000] SQUASHFS error: Unable to read data cache entry [54b5a]
  144. [ 3.490000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  145. [ 3.500000] SQUASHFS error: Unable to read data cache entry [54b5a]
  146. [ 3.500000] SQUASHFS error: Unable to read page, block 54b5a, size 8d94
  147. [ 3.620000] Kernel panic - not syncing: Attempted to kill init!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!