Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ## Starting application at 0x00900000 ...
- CPU window#0: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#1: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#2: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#3: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#4: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#5: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#6: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#7: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#8: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#9: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#10: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#11: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#12: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#13: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#14: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#15: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#16: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#17: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#18: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- CPU window#19: c 0x00000000, b 0x00000000, rl 0x00000000, rh 0x00000000
- Internal regs base: 0xf1000000
- DDR CS#0: b 0x00000000, s 0x7fffffe1
- DDR CS#1: b 0x10000000, s 0x0fffffe4
- DDR CS#2: b 0x20000000, s 0x0fffffe8
- DDR CS#3: b 0x30000000, s 0x0fffffec
- PCIE windows base 0xf1080000
- PCIE window#0: cr 0x7fff1e01 br 0x00000000 remap 0x00000000
- PCIE window#1: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#2: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#3: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#4: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#5: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE bar#0: cr 0x00000001 br 0xf100000c brh 0x00000000
- PCIE bar#1: cr 0x7fff0001 br 0x0000000c brh 0x00000000
- PCIE bar#2: cr 0x00000000 br 0x00000000 brh 0x00000000
- PCIE bar#3: cr 0x00000000 br 0x00000000 brh 0x11ab11ab
- PCIE windows base 0xf1040000
- PCIE window#0: cr 0x7fff1e01 br 0x00000000 remap 0x00000000
- PCIE window#1: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#2: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#3: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#4: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#5: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE bar#0: cr 0x00000001 br 0xf100000c brh 0x00000000
- PCIE bar#1: cr 0x7fff0001 br 0x0000000c brh 0x00000000
- PCIE bar#2: cr 0x00000000 br 0x00000000 brh 0x00000000
- PCIE bar#3: cr 0x00000000 br 0x00000000 brh 0x11ab11ab
- PCIE windows base 0xf1044000
- PCIE window#0: cr 0x7fff1e01 br 0x00000000 remap 0x00000000
- PCIE window#1: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#2: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#3: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#4: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#5: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE bar#0: cr 0x00000001 br 0xf100000c brh 0x00000000
- PCIE bar#1: cr 0x7fff0001 br 0x0000000c brh 0x00000000
- PCIE bar#2: cr 0x00000000 br 0x00000000 brh 0x00000000
- PCIE bar#3: cr 0x00000000 br 0x00000000 brh 0x11ab11ab
- PCIE windows base 0xf1048000
- PCIE window#0: cr 0x7fff1e01 br 0x00000000 remap 0x00000000
- PCIE window#1: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#2: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#3: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#4: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE window#5: cr 0x00000000 br 0x00000000 remap 0x00000000
- PCIE bar#0: cr 0x00000001 br 0xf100000c brh 0x00000000
- PCIE bar#1: cr 0x7fff0001 br 0x0000000c brh 0x00000000
- PCIE bar#2: cr 0x00000000 br 0x00000000 brh 0x00000000
- PCIE bar#3: cr 0x00000000 br 0x00000000 brh 0x11ab11ab
- ETH window#0: b 0x00001e00, s 0x7fff0000, ha 0x00000000
- ETH window#1: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#2: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#3: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#4: b 0x00000000, s 0x00000000
- ETH window#5: b 0x00000000, s 0x00000000
- ETH windows: bare 0x0000003e, epap 0x00000003
- ETH window#0: b 0x00001e00, s 0x7fff0000, ha 0x00000000
- ETH window#1: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#2: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#3: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#4: b 0x00000000, s 0x00000000
- ETH window#5: b 0x00000000, s 0x00000000
- ETH windows: bare 0x0000003e, epap 0x00000003
- ETH window#0: b 0x00001e00, s 0x7fff0000, ha 0x00000000
- ETH window#1: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#2: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#3: b 0x00000000, s 0x00000000, ha 0x00000000
- ETH window#4: b 0x00000000, s 0x00000000
- ETH window#5: b 0x00000000, s 0x00000000
- ETH windows: bare 0x0000003e, epap 0x00000003
- USB window#0: c 0x7fff1e01, b 0x00000000
- USB window#1: c 0x00000000, b 0x00000000
- USB window#2: c 0x00000000, b 0x00000000
- USB window#3: c 0x00000000, b 0x00000000
- CESA window#0: c 0x7fff1e01, b 0x00000000
- CESA window#1: c 0x00000000, b 0x00000000
- CESA window#2: c 0x00000000, b 0x00000000
- CESA window#3: c 0x00000000, b 0x00000000
- CESA window#0: c 0x7fff1e01, b 0x00000000
- CESA window#1: c 0x00000000, b 0x00000000
- CESA window#2: c 0x00000000, b 0x00000000
- CESA window#3: c 0x00000000, b 0x00000000
- USB3.0 window#0: c 0x7fff1e01, b 0x00000000
- USB3.0 window#1: c 0x00000000, b 0x00000000
- USB3.0 window#2: c 0x00000000, b 0x00000000
- USB3.0 window#3: c 0x00000000, b 0x00000000
- USB3.0 window#4: c 0x00000000, b 0x00000000
- USB3.0 window#5: c 0x00000000, b 0x00000000
- USB3.0 window#6: c 0x00000000, b 0x00000000
- USB3.0 window#7: c 0x00000000, b 0x00000000
- USB3.0 window#0: c 0x7fff1e01, b 0x00000000
- USB3.0 window#1: c 0x00000000, b 0x00000000
- USB3.0 window#2: c 0x00000000, b 0x00000000
- USB3.0 window#3: c 0x00000000, b 0x00000000
- USB3.0 window#4: c 0x00000000, b 0x00000000
- USB3.0 window#5: c 0x00000000, b 0x00000000
- USB3.0 window#6: c 0x00000000, b 0x00000000
- USB3.0 window#7: c 0x00000000, b 0x00000000
- CPU(0) applied BP hardening: BPIALL
- Copyright (c) 1992-2018 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.2-BETA1 #62 7474d9d5031(a38x-dev-stable11-pdk)-dirty: Thu May 17 09:40:36 CEST 2018
- root@pdkfreebsd:/root/x10/obj_new/arm.armv6/root/x10/freebsd/sys/ARMADA38X arm
- FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
- Preloaded elf kernel "kernel" at 0xc078bbd4.
- CPU: ARM Cortex-A9 r4p1 (ECO: 0x00000000)
- CPU Features:
- Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
- Optional instructions:
- UMULL, SMULL, SIMD(ext)
- LoUU:2 LoC:2 LoUIS:2
- Cache level 1:
- 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
- 32KB/32B 4-way instruction cache Read-Alloc
- real memory = 2147479552 (2047 MB)
- avail memory = 2094632960 (1997 MB)
- Physical memory chunk(s):
- 0x00001000 - 0x7fffffff, 2047 MB ( 524287 pages)
- Excluded memory regions:
- 0x00900000 - 0x01153fff, 8 MB ( 2132 pages) NoAlloc
- Static device mappings:
- 0xf1000000 - 0xf10fffff mapped at VA 0xf1000000
- SOC: (0x6820:0x04) Marvell 88F6820, TClock 250MHz, Frequency 1600MHz
- Instruction cache prefetch enabled, data cache prefetch disabled
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- ULE: setup cpu 0
- ULE: setup cpu 1
- wlan: <802.11 Link Layer>
- random: entropy device external interface
- mem: <memory>
- nfslock: pseudo-device
- null: <full device, null device, zero device>
- crypto: <crypto core>
- openfirm: <Open Firmware control device>
- random: harvesting attach, 8 bytes (4 bits) from nexus0
- ofwbus0: <Open Firmware Device Tree>
- simplebus0: <Flattened device tree simple bus> on ofwbus0
- simplebus1: <Flattened device tree simple bus> on simplebus0
- random: harvesting attach, 8 bytes (4 bits) from simplebus1
- random: harvesting attach, 8 bytes (4 bits) from simplebus0
- random: harvesting attach, 8 bytes (4 bits) from ofwbus0
- l2cache0: <PL310 L2 cache controller> mem 0x8000-0x8fff on simplebus1
- simplebus1: no default resources for rid = 0, type = 1
- l2cache0: cannot allocate IRQ, not using interrupt
- l2cache0: Part number: 0x3, release: 0x9
- l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
- l2cache0: Early BRESP response: disabled
- l2cache0: Instruction prefetch: disabled
- l2cache0: Data prefetch: enabled
- l2cache0: Non-secure interrupt control: disabled
- l2cache0: Non-secure lockdown: enabled
- l2cache0: Share override: disabled
- l2cache0: Double linefill: enabled
- l2cache0: Instruction prefetch: disabled
- l2cache0: Data prefetch: enabled
- l2cache0: Double linefill on WRAP request: enabled
- l2cache0: Prefetch drop: disabled
- l2cache0: Incr double Linefill: enabled
- l2cache0: Not same ID on exclusive sequence: disabled
- l2cache0: Prefetch offset: 0
- random: harvesting attach, 8 bytes (4 bits) from l2cache0
- gic0: <ARM Generic Interrupt Controller> mem 0xd000-0xdfff,0xc100-0xc1ff on simplebus1
- simplebus1: no default resources for rid = 0, type = 1
- gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 192
- random: harvesting attach, 8 bytes (4 bits) from gic0
- mpic0: <Marvell Integrated Interrupt Controller> mem 0x20a00-0x20ccf,0x21070-0x210c7 irq 17 on simplebus1
- simplebus1: no default resources for rid = 2, type = 3
- random: harvesting attach, 8 bytes (4 bits) from mpic0
- mp_tmr0: <ARM MPCore Timers> mem 0xc200-0xc21f irq 3 on simplebus1
- Timecounter "MPCore" frequency 800000000 Hz quality 800
- random: harvesting attach, 8 bytes (4 bits) from mp_tmr0
- mp_tmr1: <ARM MPCore Timers> mem 0xc600-0xc61f irq 4 on simplebus1
- Event timer "MPCore" frequency 800000000 Hz quality 1000
- random: harvesting attach, 8 bytes (4 bits) from mp_tmr1
- ofwbus0: <pmu> irq 0 compat arm,cortex-a9-pmu (no driver attached)
- simplebus0: <bootrom> mem 0x11d000000000000-0x11d0000001fffff compat marvell,bootrom (no driver attached)
- simplebus0: <devbus-bootcs> mem 0xf001000000010400-0xf001000000010407 disabled compat marvell,mvebu-devbus (no driver attached)
- simplebus0: <devbus-cs0> mem 0xf001000000010408-0xf00100000001040f disabled compat marvell,mvebu-devbus (no driver attached)
- simplebus0: <devbus-cs1> mem 0xf001000000010410-0xf001000000010417 disabled compat marvell,mvebu-devbus (no driver attached)
- simplebus0: <devbus-cs2> mem 0xf001000000010418-0xf00100000001041f disabled compat marvell,mvebu-devbus (no driver attached)
- simplebus0: <devbus-cs3> mem 0xf001000000010420-0xf001000000010427 disabled compat marvell,mvebu-devbus (no driver attached)
- simplebus1: <scu@c000> mem 0xc000-0xc057 compat arm,cortex-a9-scu (no driver attached)
- twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 5 on simplebus1
- twsi0: calculated baud rates are:
- 48 kHz (M=15, N=4) for slow,
- 97 kHz (M=15, N=3) for fast.
- iicbus0: <Philips I2C bus> on twsi0
- iic0: <I2C generic I/O> on iicbus0
- random: harvesting attach, 8 bytes (4 bits) from iic0
- random: harvesting attach, 8 bytes (4 bits) from iicbus0
- random: harvesting attach, 8 bytes (4 bits) from twsi0
- simplebus1: <i2c@11100> mem 0x11100-0x1111f irq 6 disabled compat marvell,mv78230-a0-i2c (no driver attached)
- uart0: could not determine frequency
- uart0: could not determine frequency
- uart0: console (-1,n,8,1)le> mem 0x12000-0x120ff irq 7 on simplebus1
- uart0: fast interrupt
- uart0: PPS capture mode: DCDinvalid
- random: harvesting attach, 8 bytes (4 bits) from uart0
- simplebus1: <serial@12100> mem 0x12100-0x121ff irq 8 disabled compat snps,dw-apb-uart (no driver attached)
- simplebus1: <pinctrl@18000> mem 0x18000-0x1801f compat marvell,mv88f6828-pinctrl (no driver attached)
- gpio0: <Marvell Integrated GPIO Controller> mem 0x18100-0x1813f,0x181c0-0x181c7 irq 9,10,11,12 on simplebus1
- gpio0: 32 pins available
- gpio0: 4 IRQs available
- gpiobus0: <GPIO bus> on gpio0
- random: harvesting attach, 8 bytes (4 bits) from gpiobus0
- gpioc0: <GPIO controller> on gpio0
- random: harvesting attach, 8 bytes (4 bits) from gpioc0
- random: harvesting attach, 8 bytes (4 bits) from gpio0
- gpio1: <Marvell Integrated GPIO Controller> mem 0x18140-0x1817f,0x181c8-0x181cf irq 13,14,15,16 on simplebus1
- gpio1: 28 pins available
- gpio1: 4 IRQs available
- gpiobus1: <GPIO bus> on gpio1
- random: harvesting attach, 8 bytes (4 bits) from gpiobus1
- gpioc1: <GPIO controller> on gpio1
- random: harvesting attach, 8 bytes (4 bits) from gpioc1
- random: harvesting attach, 8 bytes (4 bits) from gpio1
- simplebus1: <system-controller@18200> mem 0x18200-0x182ff compat marvell,armada-380-system-controller (no driver attached)
- simplebus1: <clock-gating-control@18220> mem 0x18220-0x18223 compat marvell,armada-380-gating-clock (no driver attached)
- simplebus1: <mvebu-sar@18600> mem 0x18600-0x18603 compat marvell,armada-380-core-clock (no driver attached)
- simplebus1: <mbus-controller@20000> mem 0x20000-0x200ff,0x20180-0x2019f,0x20250-0x20257 compat marvell,mbus-controller (no driver attached)
- simplebus1: <timer@20300> mem 0x20300-0x2032f,0x21040-0x2106f irq 18,19,20,21,22,23 compat marvell,armada-380-timer (no driver attached)
- wdt0: <Marvell Watchdog Timer> mem 0x20300-0x20333,0x20704-0x20707,0x18260-0x18263 on simplebus1
- random: harvesting attach, 8 bytes (4 bits) from wdt0
- simplebus1: <cpurst@20800> mem 0x20800-0x2080f compat marvell,armada-370-cpu-reset (no driver attached)
- simplebus1: <mpcore-soc-ctrl@20d20> mem 0x20d20-0x20d8b compat marvell,armada-380-mpcore-soc-ctrl (no driver attached)
- simplebus1: <coherency-fabric@21010> mem 0x21010-0x2102b compat marvell,armada-380-coherency-fabric (no driver attached)
- pmsu0: <Power Management Service Unit> mem 0x22000-0x22fff on simplebus1
- random: harvesting attach, 8 bytes (4 bits) from pmsu0
- mvneta0: <NETA controller> mem 0x70000-0x73fff irq 24 on simplebus1
- mvneta0: version is 10
- mvneta0: bpf attached
- mvneta0: Ethernet address: 00:0d:b4:14:5c:85
- miibus0: <MII bus> on mvneta0
- ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
- ukphy0: OUI 0x000ac2, model 0x001d, rev. 1
- ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy0
- random: harvesting attach, 8 bytes (4 bits) from miibus0
- random: harvesting attach, 8 bytes (4 bits) from mvneta0
- mvneta1: <NETA controller> mem 0x30000-0x33fff irq 25 on simplebus1
- mvneta1: version is 10
- mvneta1: bpf attached
- mvneta1: Ethernet address: 00:0d:b4:14:5c:86
- miibus1: <MII bus> on mvneta1
- ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
- ukphy1: OUI 0x000ac2, model 0x001d, rev. 1
- ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy1
- random: harvesting attach, 8 bytes (4 bits) from miibus1
- random: harvesting attach, 8 bytes (4 bits) from mvneta1
- mvneta2: <NETA controller> mem 0x34000-0x37fff irq 26 on simplebus1
- mvneta2: version is 10
- mvneta2: bpf attached
- mvneta2: Ethernet address: 00:0d:b4:14:5c:87
- mdio0: <MDIO> on mvneta2
- e6000sw0: single-chip addressing mode
- e6000sw0: single-chip addressing mode
- e6000sw0: <Marvell 88E6176> on mdio0
- e6000sw0: PHY at 0
- miibus2: <MII bus> on e6000sw0
- ukphy2: <Generic IEEE 802.3u media interface> PHY 0 on miibus2
- ukphy2: OUI 0x000ac2, model 0x002b, rev. 1
- ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy2
- random: harvesting attach, 8 bytes (4 bits) from miibus2
- e6000sw0: PHY at 1
- miibus3: <MII bus> on e6000sw0
- ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus3
- ukphy3: OUI 0x000ac2, model 0x002b, rev. 1
- ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy3
- random: harvesting attach, 8 bytes (4 bits) from miibus3
- e6000sw0: PHY at 2
- miibus4: <MII bus> on e6000sw0
- ukphy4: <Generic IEEE 802.3u media interface> PHY 2 on miibus4
- ukphy4: OUI 0x000ac2, model 0x002b, rev. 1
- ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy4
- random: harvesting attach, 8 bytes (4 bits) from miibus4
- e6000sw0: PHY at 3
- miibus5: <MII bus> on e6000sw0
- ukphy5: <Generic IEEE 802.3u media interface> PHY 3 on miibus5
- ukphy5: OUI 0x000ac2, model 0x002b, rev. 1
- ukphy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy5
- random: harvesting attach, 8 bytes (4 bits) from miibus5
- e6000sw0: PHY at 4
- miibus6: <MII bus> on e6000sw0
- ukphy6: <Generic IEEE 802.3u media interface> PHY 4 on miibus6
- ukphy6: OUI 0x000ac2, model 0x002b, rev. 1
- ukphy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy6
- random: harvesting attach, 8 bytes (4 bits) from miibus6
- e6000sw0: CPU port at 5
- e6000sw0: PHY at 6
- miibus7: <MII bus> on e6000sw0
- ukphy7: <Generic IEEE 802.3u media interface> PHY 6 on miibus7
- ukphy7: OUI 0x000ac2, model 0x001d, rev. 4
- ukphy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- random: harvesting attach, 8 bytes (4 bits) from ukphy7
- random: harvesting attach, 8 bytes (4 bits) from miibus7
- etherswitch0: <Switch controller> on e6000sw0
- random: harvesting attach, 8 bytes (4 bits) from etherswitch0
- random: harvesting attach, 8 bytes (4 bits) from e6000sw0
- random: harvesting attach, 8 bytes (4 bits) from mdio0
- random: harvesting attach, 8 bytes (4 bits) from mvneta2
- ehci0: <Marvell Integrated USB 2.0 controller> mem 0x58000-0x584ff irq 27 on simplebus1
- ehci0: 5.24 GL USB-2 workaround enabled
- usbus0: EHCI version 1.0
- usbus0: stop timeout
- usbus0 on ehci0
- ehci0: usbpf: Attached
- random: harvesting attach, 8 bytes (4 bits) from usbus0
- random: harvesting attach, 8 bytes (4 bits) from ehci0
- simplebus1: <xor@60800> mem 0x60800-0x608ff,0x60a00-0x60aff compat marvell,armada-380-xor (no driver attached)
- simplebus1: <xor@60900> mem 0x60900-0x609ff,0x60b00-0x60bff compat marvell,armada-380-xor (no driver attached)
- simplebus1: <mdio@72004> mem 0x72004-0x72007 compat marvell,orion-mdio (no driver attached)
- cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x9ffff irq 28,29 on simplebus1
- crypto: assign cesa0 driver id 0, flags 16777216
- crypto: cesa0 registers alg 11 flags 0 maxoplen 0
- crypto: cesa0 registers alg 1 flags 0 maxoplen 0
- crypto: cesa0 registers alg 2 flags 0 maxoplen 0
- crypto: cesa0 registers alg 13 flags 0 maxoplen 0
- crypto: cesa0 registers alg 6 flags 0 maxoplen 0
- crypto: cesa0 registers alg 14 flags 0 maxoplen 0
- crypto: cesa0 registers alg 7 flags 0 maxoplen 0
- crypto: cesa0 registers alg 18 flags 0 maxoplen 0
- random: harvesting attach, 8 bytes (4 bits) from cesa0
- rtc0: <Marvell Integrated RTC> mem 0xa3800-0xa381f,0x184a0-0x184ab irq 30 on simplebus1
- rtc0: registered as a time-of-day clock, resolution 1.000000s
- random: harvesting attach, 8 bytes (4 bits) from rtc0
- simplebus1: <sata@a8000> mem 0xa8000-0xa9fff irq 31 disabled compat marvell,armada-380-ahci (no driver attached)
- simplebus1: <bm@c8000> mem 0xc8000-0xc80ab disabled compat marvell,armada-380-neta-bm (no driver attached)
- simplebus1: <sata@e0000> mem 0xe0000-0xe1fff irq 32 disabled compat marvell,armada-380-ahci (no driver attached)
- simplebus1: <clock@e4250> mem 0xe4250-0xe425b compat marvell,armada-380-corediv-clock (no driver attached)
- armada_thermal0: <Armada380 Thermal Control> mem 0xe4078-0xe407b,0xe4074-0xe4077 on simplebus1
- random: harvesting attach, 8 bytes (4 bits) from armada_thermal0
- simplebus1: <flash@d0000> mem 0xd0000-0xd0053 irq 33 disabled compat marvell,armada370-nand (no driver attached)
- simplebus1: <sdhci@d8000> mem 0xd8000-0xd8fff,0xdc000-0xdc0ff,0x18454-0x18457 irq 34 disabled compat marvell,armada-380-sdhci (no driver attached)
- xhci0: <Marvell Integrated USB 3.0 controller> mem 0xf0000-0xf3fff,0xf4000-0xf7fff irq 35 on simplebus1
- xhci0: 32 bytes context size, 32-bit DMA
- usbus1 on xhci0
- xhci0: usbpf: Attached
- random: harvesting attach, 8 bytes (4 bits) from usbus1
- random: harvesting attach, 8 bytes (4 bits) from xhci0
- xhci1: <Marvell Integrated USB 3.0 controller> mem 0xf8000-0xfbfff,0xfc000-0xfffff irq 36 on simplebus1
- xhci1: 32 bytes context size, 32-bit DMA
- usbus2 on xhci1
- xhci1: usbpf: Attached
- random: harvesting attach, 8 bytes (4 bits) from usbus2
- random: harvesting attach, 8 bytes (4 bits) from xhci1
- cesa1: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x9ffff irq 37,38 on simplebus1
- crypto: assign cesa1 driver id 1, flags 16777216
- crypto: cesa1 registers alg 11 flags 0 maxoplen 0
- crypto: cesa1 registers alg 1 flags 0 maxoplen 0
- crypto: cesa1 registers alg 2 flags 0 maxoplen 0
- crypto: cesa1 registers alg 13 flags 0 maxoplen 0
- crypto: cesa1 registers alg 6 flags 0 maxoplen 0
- crypto: cesa1 registers alg 14 flags 0 maxoplen 0
- crypto: cesa1 registers alg 7 flags 0 maxoplen 0
- crypto: cesa1 registers alg 18 flags 0 maxoplen 0
- random: harvesting attach, 8 bytes (4 bits) from cesa1
- simplebus0: <sa-sram0> mem 0x919000000000000-0x9190000000007ff compat mmio-sram (no driver attached)
- simplebus0: <sa-sram1> mem 0x915000000000000-0x9150000000007ff compat mmio-sram (no driver attached)
- simplebus0: <bm-bppi> mem 0xc04000000000000-0xc040000000fffff disabled compat mmio-sram (no driver attached)
- simplebus0: <spi@10600> mem 0xf001000000010600-0xf00100000001064f irq 1 compat marvell,armada-380-spi (no driver attached)
- simplebus0: <spi@10680> mem 0xf001000000010680-0xf0010000000106cf irq 2 disabled compat marvell,armada-380-spi (no driver attached)
- pcib_ctrl0: <Marvell Integrated PCIe Bus Controller> on simplebus0
- pcib0: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
- pci0: <PCI bus> on pcib0
- pci0: domain=0, physical bus=0
- random: harvesting attach, 8 bytes (4 bits) from pci0
- random: harvesting attach, 8 bytes (4 bits) from pcib0
- pcib1: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
- pci1: <PCI bus> on pcib1
- pci1: domain=1, physical bus=0
- random: harvesting attach, 8 bytes (4 bits) from pci1
- random: harvesting attach, 8 bytes (4 bits) from pcib1
- pcib2: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
- pci2: <PCI bus> on pcib2
- pci2: domain=2, physical bus=0
- random: harvesting attach, 8 bytes (4 bits) from pci2
- random: harvesting attach, 8 bytes (4 bits) from pcib2
- pcib3: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
- pci3: <PCI bus> on pcib3
- pci3: domain=3, physical bus=0
- random: harvesting attach, 8 bytes (4 bits) from pci3
- random: harvesting attach, 8 bytes (4 bits) from pcib3
- random: harvesting attach, 8 bytes (4 bits) from pcib_ctrl0
- cpulist0: <Open Firmware CPU Group> on ofwbus0
- cpu0: <Open Firmware CPU> on cpulist0
- cpu0: missing 'clock-frequency' property
- random: harvesting attach, 8 bytes (4 bits) from cpu0
- cpu1: <Open Firmware CPU> on cpulist0
- cpu1: missing 'clock-frequency' property
- random: harvesting attach, 8 bytes (4 bits) from cpu1
- random: harvesting attach, 8 bytes (4 bits) from cpulist0
- ofwbus0: <dsa@0> compat marvell,dsa (no driver attached)
- gpioled0: <GPIO LEDs> on ofwbus0
- random: harvesting attach, 8 bytes (4 bits) from gpioled0
- cryptosoft0: <software crypto>
- crypto: assign cryptosoft0 driver id 2, flags 100663296
- crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
- random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
- procfs registered
- Timecounters tick every 1.000 msec
- vlan: initialized, using hash tables with chaining
- crypto: <crypto device>
- lo0: bpf attached
- tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
- IPsec: Initialized Security Association Processing.
- mvneta2: link state changed to UP
- e6000sw0port0: link state changed to DOWN
- e6000sw0port1: link state changed to DOWN
- e6000sw0port2: link state changed to DOWN
- e6000sw0port3: link state changed to DOWN
- e6000sw0port4: link state changed to DOWN
- e6000sw0port6: link state changed to DOWN
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 5.0Gbps Super Speed USB v3.0
- usbus2: 5.0Gbps Super Speed USB v3.0
- Release APs
- CPU(1) applied BP hardening: BPIALL
- mountroot: invalid file system specification.
- ugen1.1: <Marvell XHCI root HUB> at usbus1
- ugen0.1: <Marvell EHCI root HUB> at usbus0
- uhub0: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
- uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- Root mount waiting for: usbus2 usbus1 usbus0
- ugen2.1: <Marvell XHCI root HUB> at usbus2
- uhub2: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
- uhub0: 2 ports with 2 removable, self powered
- random: harvesting attach, 8 bytes (4 bits) from uhub0
- uhub2: 2 ports with 2 removable, self powered
- random: harvesting attach, 8 bytes (4 bits) from uhub2
- uhub1: 1 port with 1 removable, self powered
- random: harvesting attach, 8 bytes (4 bits) from uhub1
- Root mount waiting for: usbus2 usbus1
- ugen2.2: <Generic USB3.0 Card Reader> at usbus2
- umass0 on uhub2
- umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.10/15.33, addr 1> on usbus2
- umass0:0:0: Attached to scbus0
- random: harvesting attach, 8 bytes (4 bits) from umass0
- pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
- pass0: <Generic MassStorageClass 1533> Removable Direct Access SPC-4 SCSI device
- pass0: Serial Number 000000001533
- pass0: 400.000MB/s transfers
- GEOM: new disk da0
- ugen1.2: <ADATA ADATA USB Flash Drive> at usbus1
- umass1 on uhub0
- umass1: <ADATA ADATA USB Flash Drive, class 0/0, rev 2.10/10.75, addr 1> on usbus1
- umass1:1:1: Attached to scbus1
- random: harvesting attach, 8 bytes (4 bits) from umass1
- pass1 at umass-sim1 bus 1 scbus1 target 0 lun 0
- pass1: <ADATA USB Flash Drive 1.00> Removable Direct Access SPC-4 SCSI device
- pass1: Serial Number 2630519150130039
- pass1: 40.000MB/s transfers
- da1 at umass-sim1 bus 1 scbus1 target 0 lun 0
- da1: <ADATA USB Flash Drive 1.00> Removable Direct Access SPC-4 SCSI device
- da1: Serial Number 2630519150130039
- da1: 40.000MB/s transfers
- da1: 7400MB (15155200 512 byte sectors)
- da1: quirks=0x2<NO_6_BYTE>
- da1: Delete methods: <NONE(*),ZERO>
- pass2 at umass-sim0 bus 0 scbus0 target 0 lun 1
- pass2: <Generic MassStorageClass 1533> Removable Direct Access SPC-4 SCSI device
- pass2: Serial Number 000000001533
- pass2: 400.000MB/s transfers
- (da0:umass-sim0:0:0:0): got CAM status 0x44
- (da0:umass-sim0:0:0:0): fatal error, failed to attach to device
- da0: Delete methods: <NONE(*),ZERO>
- Opened disk da0 -> 6
- g_access(944): provider da0 has error 6 set
- g_access(944): provider da0 has error 6 set
- g_access(944): provider da0 has error 6 set
- GEOM: new disk da1
- GEOM: new disk da2
- (da2:umass-sim0:0:0:1): got CAM status 0x44
- (da2:umass-sim0:0:0:1): fatal error, failed to attach to device
- da2: Delete methods: <NONE(*),ZERO>
- Opened disk da2 -> 6
- g_access(944): provider da2 has error 6 set
- g_access(944): provider da2 has error 6 set
- g_access(944): provider da2 has error 6 set
- Loader variables:
- Manual root filesystem specification:
- <fstype>:<device> [options]
- Mount <device> using filesystem <fstype>
- and with the specified (optional) option list.
- eg. ufs:/dev/da0s1a
- zfs:tank
- cd9660:/dev/cd0 ro
- (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
- ? List valid disk boot devices
- . Yield 1 second (for background tasks)
- <empty line> Abort manual input
- mountroot>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement