Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Linux version 3.10.14 (jenkins@szy-rommaker) (gcc version 4.8.5 ( crosstool-NG crosstool-ng-1.22.0) ) #1 MiWiFi-R3P-2.13.65 SMP Fri Aug 25 15:07:3 3 CST 2017
- [ 0.000000]
- [ 0.000000] The CPU feqenuce set to 880 MHz
- [ 0.000000] GCMP present
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] Software DMA cache coherency
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 1c000000 @ 00000000 (usable)
- [ 0.000000] memory: 04000000 @ 20000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00000000-0x01ffffff]
- [ 0.000000] Normal [mem 0x02000000-0x1fffffff]
- [ 0.000000] HighMem [mem 0x20000000-0x23ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x1bffffff]
- [ 0.000000] node 0: [mem 0x20000000-0x23ffffff]
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] free_area_init_node: node 0, pgdat 825a6b80, node_mem_map 8279900 0
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 8192 pages, LIFO batch:0
- [ 0.000000] Normal zone: 960 pages used for memmap
- [ 0.000000] Normal zone: 106496 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 128 pages used for memmap
- [ 0.000000] HighMem zone: 16384 pages, LIFO batch:3
- [ 0.000000] Detected 3 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @82c1d000 s6848 r8192 d13632 u32768
- [ 0.000000] pcpu-alloc: s6848 r8192 d13632 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 130048
- [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock5 u art_en=0 factory_mode=0 usb_u3=1
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Writing ErrCtl register=000512c1
- [ 0.000000] Readback ErrCtl register=000512c1
- [ 0.000000] allocated 1179648 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups
- [ 0.000000] Memory: 510204k/458752k available (4574k kernel code, 14084k rese rved, 1212k data, 1568k init, 65536k highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] console [ttyS1] enabled
- [ 0.140000] Calibrating delay loop... 577.53 BogoMIPS (lpj=2887680)
- [ 0.200000] pid_max: default: 32768 minimum: 301
- [ 0.200000] Mount-cache hash table entries: 512
- [ 0.210000] Initializing cgroup subsys memory
- [ 0.210000] launch: starting cpu1
- [ 0.220000] launch: cpu1 gone!
- [ 0.220000] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.220000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.220000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
- [ 0.220000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.280000] Synchronize counters for CPU 1: done.
- [ 0.290000] launch: starting cpu2
- [ 0.290000] launch: cpu2 gone!
- [ 0.290000] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.290000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.290000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
- [ 0.290000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.350000] Synchronize counters for CPU 2: done.
- [ 0.360000] launch: starting cpu3
- [ 0.360000] launch: cpu3 gone!
- [ 0.360000] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.360000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.360000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
- [ 0.360000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.420000] Synchronize counters for CPU 3: done.
- [ 0.430000] Brought up 4 CPUs
- [ 0.430000] devtmpfs: initialized
- [ 0.430000] NET: Registered protocol family 16
- [ 0.730000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.740000] PCIE PHY initialize
- [ 0.740000] ***** Xtal 40MHz *****
- [ 0.740000] start MT7621 PCIe register access
- [ 1.340000] RALINK_RSTCTRL = 7000000
- [ 1.340000] RALINK_CLKCFG1 = 77ffeff8
- [ 1.340000]
- [ 1.340000] *************** MT7621 PCIe RC mode *************
- [ 1.840000] PCIE2 no card, disable it(RST&CLK)
- [ 1.840000] pcie_link status = 0x3
- [ 1.850000] RALINK_RSTCTRL= 3000000
- [ 1.850000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
- [ 1.860000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- [ 1.860000] PCIE0 enabled
- [ 1.860000] PCIE1 enabled
- [ 1.870000] interrupt enable status: 300000
- [ 1.870000] Port 1 N_FTS = 1b105000
- [ 1.870000] Port 0 N_FTS = 1b105000
- [ 1.880000] config reg done
- [ 1.880000] init_rt2880pci done
- [ 1.890000] FPU Affinity set after 11720 emulations
- [ 1.910000] bio: create slab <bio-0> at 0
- [ 1.910000] SCSI subsystem initialized
- [ 1.920000] usbcore: registered new interface driver usbfs
- [ 1.920000] usbcore: registered new interface driver hub
- [ 1.930000] usbcore: registered new device driver usb
- [ 1.930000] PCI host bridge to bus 0000:00
- [ 1.930000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.940000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 1.940000] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
- [ 1.950000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
- [ 1.950000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x7fffffff]
- [ 1.950000] pci 0000:00:00.0: reg 14: [mem 0x60200000-0x6020ffff]
- [ 1.950000] pci 0000:00:00.0: supports D1
- [ 1.950000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 1.950000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
- [ 1.950000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x7fffffff]
- [ 1.950000] pci 0000:00:01.0: reg 14: [mem 0x60210000-0x6021ffff]
- [ 1.950000] pci 0000:00:01.0: supports D1
- [ 1.950000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
- [ 1.950000] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
- [ 1.950000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit]
- [ 1.950000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 1.950000] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
- [ 1.950000] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit]
- [ 1.950000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
- [ 1.950000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
- [ 1.950000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.950000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.960000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.960000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- [ 1.970000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 1.970000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
- [ 1.980000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bi t]
- [ 1.980000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.990000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.990000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bi t]
- [ 2.000000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 2.000000] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- [ 2.010000] BAR0 at slot 0 = 0
- [ 2.010000] bus=0x0, slot = 0x0
- [ 2.010000] res[0]->start = 0
- [ 2.010000] res[0]->end = 0
- [ 2.020000] res[1]->start = 60200000
- [ 2.020000] res[1]->end = 6020ffff
- [ 2.020000] res[2]->start = 0
- [ 2.020000] res[2]->end = 0
- [ 2.030000] res[3]->start = 0
- [ 2.030000] res[3]->end = 0
- [ 2.030000] res[4]->start = 0
- [ 2.030000] res[4]->end = 0
- [ 2.040000] res[5]->start = 0
- [ 2.040000] res[5]->end = 0
- [ 2.040000] BAR0 at slot 1 = 0
- [ 2.040000] bus=0x0, slot = 0x1
- [ 2.050000] res[0]->start = 0
- [ 2.050000] res[0]->end = 0
- [ 2.050000] res[1]->start = 60210000
- [ 2.050000] res[1]->end = 6021ffff
- [ 2.060000] res[2]->start = 0
- [ 2.060000] res[2]->end = 0
- [ 2.060000] res[3]->start = 0
- [ 2.060000] res[3]->end = 0
- [ 2.070000] res[4]->start = 0
- [ 2.070000] res[4]->end = 0
- [ 2.070000] res[5]->start = 0
- [ 2.070000] res[5]->end = 0
- [ 2.080000] bus=0x1, slot = 0x0, irq=0x4
- [ 2.080000] res[0]->start = 60000000
- [ 2.080000] res[0]->end = 600fffff
- [ 2.090000] res[1]->start = 0
- [ 2.090000] res[1]->end = 0
- [ 2.090000] res[2]->start = 0
- [ 2.090000] res[2]->end = 0
- [ 2.100000] res[3]->start = 0
- [ 2.100000] res[3]->end = 0
- [ 2.100000] res[4]->start = 0
- [ 2.100000] res[4]->end = 0
- [ 2.110000] res[5]->start = 0
- [ 2.110000] res[5]->end = 0
- [ 2.110000] bus=0x2, slot = 0x1, irq=0x18
- [ 2.110000] res[0]->start = 60100000
- [ 2.120000] res[0]->end = 601fffff
- [ 2.120000] res[1]->start = 0
- [ 2.120000] res[1]->end = 0
- [ 2.120000] res[2]->start = 0
- [ 2.130000] res[2]->end = 0
- [ 2.130000] res[3]->start = 0
- [ 2.130000] res[3]->end = 0
- [ 2.130000] res[4]->start = 0
- [ 2.140000] res[4]->end = 0
- [ 2.140000] res[5]->start = 0
- [ 2.140000] res[5]->end = 0
- [ 2.150000] Switching to clocksource MIPS
- [ 2.150000] cfg80211: Calling CRDA to update world regulatory domain
- [ 2.150000] NET: Registered protocol family 2
- [ 2.150000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 2.150000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 2.150000] TCP: Hash tables configured (established 4096 bind 4096)
- [ 2.150000] TCP: reno registered
- [ 2.150000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.150000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.150000] NET: Registered protocol family 1
- [ 2.150000] PCI: CLS 80 bytes, default 32
- [ 3.170000] 4 CPUs re-calibrate udelay(lpj = 2924544)
- [ 3.180000] bounce pool size: 64 pages
- [ 3.200000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 3.210000] msgmni has been set to 868
- [ 3.210000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53)
- [ 3.220000] io scheduler noop registered (default)
- [ 3.220000] MIWIFI panic notifier registeredreg_int_mask=0, INT_MASK= 0
- [ 3.230000] HSDMA_init
- [ 3.230000]
- [ 3.230000] hsdma_phy_tx_ring0 = 0x01c00000, hsdma_tx_ring0 = 0xa1c00000
- [ 3.240000]
- [ 3.240000] hsdma_phy_rx_ring0 = 0x01c04000, hsdma_rx_ring0 = 0xa1c04000
- [ 3.250000] TX_CTX_IDX0 = 0
- [ 3.250000] TX_DTX_IDX0 = 0
- [ 3.250000] RX_CRX_IDX0 = 3ff
- [ 3.260000] RX_DRX_IDX0 = 0
- [ 3.260000] set_fe_HSDMA_glo_cfg
- [ 3.260000] HSDMA_GLO_CFG = 465
- [ 3.270000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 3.270000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- [ 3.280000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- [ 3.290000] led=10, on=4000, off=1, blinks,=1, reset=1, time=4000
- [ 3.290000] Ralink gpio driver initialized
- [ 3.300000] brd: module loaded
- [ 3.300000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
- [ 3.310000] Allocate 16 byte aligned buffer: 827763e0
- [ 3.320000] Enable NFI Clock
- [ 3.320000] # MTK NAND # : Use HW ECC
- [ 3.320000] NAND ID [C8 DA 90 95 44, 00909544]
- [ 3.330000] Device found in MTK table, ID: c8da, EXT_ID: 909544
- [ 3.330000] Support this Device in MTK table! c8da
- [ 3.340000] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xda (ESMT NAND 256M iB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64
- [ 3.350000] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
- [ 3.360000] Scanning device for bad blocks
- [ 3.640000] Signature matched and data read!
- [ 3.650000] load_fact_bbt success 2047
- [ 3.650000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.660000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.670000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.680000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.690000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.700000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.710000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.720000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.730000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.740000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.750000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.760000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.770000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.780000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.790000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.800000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.810000] Creating 13 MTD partitions on "MT7621-NAND":
- [ 3.820000] 0x000000000000-0x00000ff80000 : "ALL"
- [ 3.820000] 0x000000000000-0x000000040000 : "Bootloader"
- [ 3.830000] 0x000000040000-0x000000080000 : "Config"
- [ 3.840000] 0x000000080000-0x0000000c0000 : "Bdata"
- [ 3.840000] 0x0000000c0000-0x000000100000 : "Factory"
- [ 3.850000] 0x000000100000-0x000000140000 : "crash"
- [ 3.850000] 0x000000140000-0x0000001c0000 : "crash_syslog"
- [ 3.860000] 0x0000001c0000-0x000000200000 : "reserved0"
- [ 3.870000] 0x000000200000-0x000000600000 : "kernel0"
- [ 3.870000] 0x000000600000-0x000000a00000 : "kernel1"
- [ 3.880000] 0x000000a00000-0x000003200000 : "rootfs0"
- [ 3.890000] 0x000003200000-0x000005a00000 : "rootfs1"
- [ 3.890000] 0x000005a00000-0x00000ff80000 : "overlay"
- [ 3.900000] [mtk_nand] probe successfully!
- [ 3.900000] PPP generic driver version 2.4.2
- [ 3.910000] PPP BSD Compression module registered
- [ 3.910000] PPP Deflate Compression module registered
- [ 3.920000] PPP MPPE Compression module registered
- [ 3.920000] NET: Registered protocol family 24
- [ 3.930000] PPTP driver version 0.8.5
- [ 3.930000] ps: can't get major 253
- [ 3.940000] GMAC1_MAC_ADRH -- : 0x0000ec41
- [ 3.940000] GMAC1_MAC_ADRL -- : 0x180f3863
- [ 3.940000] Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx desc riptors allocated, mtu = 1500!
- [ 3.950000] GMAC1_MAC_ADRH -- : 0x0000ec41
- [ 3.960000] GMAC1_MAC_ADRL -- : 0x180f3863
- [ 3.960000] PROC INIT OK!
- [ 3.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.970000] ehci-pci: EHCI PCI platform driver
- [ 3.980000] ehci-platform: EHCI generic platform driver
- [ 3.980000] *****run project phy.
- [ 4.010000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.030000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.050000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.070000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.090000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.110000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.130000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.150000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.170000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.190000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.250000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.270000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.290000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.310000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.330000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.350000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.370000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.390000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.410000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.430000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 4.580000] xhci-hcd xhci-hcd: xHCI Host Controller
- [ 4.580000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
- [ 4.590000] xhci-hcd xhci-hcd: irq 22, io mem 0x1e1c0000
- [ 4.600000] xHCI xhci_add_endpoint called for root hub
- [ 4.600000] xHCI xhci_check_bandwidth called for root hub
- [ 4.600000] hub 1-0:1.0: USB hub found
- [ 4.600000] hub 1-0:1.0: 2 ports detected
- [ 4.600000] xhci-hcd xhci-hcd: xHCI Host Controller
- [ 4.610000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
- [ 4.620000] xHCI xhci_add_endpoint called for root hub
- [ 4.620000] xHCI xhci_check_bandwidth called for root hub
- [ 4.620000] hub 2-0:1.0: USB hub found
- [ 4.620000] hub 2-0:1.0: 1 port detected
- [ 4.620000] usbcore: registered new interface driver usb-storage
- [ 4.630000] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 4.640000] Netfilter messages via NETLINK v0.30.
- [ 4.650000] nfnl_acct: registering with nfnetlink.
- [ 4.650000] nf_conntrack version 0.5.0 (7971 buckets, 31884 max)
- [ 4.660000] ipip: IPv4 over IPv4 tunneling driver
- [ 4.660000] gre: GRE over IPv4 demultiplexor driver
- [ 4.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.680000] Type=Restricted Cone
- [ 4.680000] TCP: cubic registered
- [ 4.680000] NET: Registered protocol family 10
- [ 4.690000] NET: Registered protocol family 17
- [ 4.690000] l2tp_core: L2TP core driver, V2.0
- [ 4.700000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 4.700000] l2tp_netlink: L2TP netlink interface
- [ 4.710000] 8021q: 802.1Q VLAN Support v1.8
- [ 4.710000] QEFOTP register done
- [ 4.720000] Freeing unused kernel memory: 1568K (825a8000 - 82730000)
- [ 4.730000] csd: CSD deadlock debugging initiated!
- >[ 4.770000] Loading essential drivers...
- >[ 4.780000] Press Ctrl+C to enter RAMFS...
- [ 4.940000] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
- [ 4.960000] usb 2-1: Parent hub missing LPM exit latency info. Power managem ent will be impacted.
- [ 4.970000] add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 1, mult 0, ep 0x9bfb4b80, ep_ctx 0xa1c0d080, sch_ep 0x9b fd0080
- [ 4.980000] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [ 4.980000] [DBG] BOFFSET: 0, BREPEAT: 0
- [ 4.980000] add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 15, mult 0, ep 0x9bfb4bac, ep_ctx 0xa1c0d0a0, sch_ep 0x9 bfd0300
- [ 4.990000] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [ 4.990000] [DBG] BOFFSET: 0, BREPEAT: 0
- [ 5.000000] usb-storage 2-1:1.0: USB Mass Storage device detected
- [ 5.000000] scsi0 : usb-storage 2-1:1.0
- >[ 5.790000] Check for USB recovery...
- >[ 5.800000] Found usb storage, wait for ready
- [ 6.010000] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ : 0 ANSI: 6
- [ 6.020000] sd 0:0:0:0: [sda] 120127488 512-byte logical blocks: (61.5 GB/57. 2 GiB)
- [ 6.020000] sd 0:0:0:0: [sda] Write Protect is off
- [ 6.030000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
- [ 6.030000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
- [ 6.050000] sda: sda1
- [ 6.050000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- >[ 6.850000] Bringup the system...
- >[ 6.870000] flag_boot_rootfs=0 mounting /dev/mtd10
- [ 14.040000] FFFFFFEC:41:18: F:38:63
- [ 14.050000] Raeth v3.1 (Tasklet)
- [ 14.050000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- [ 14.060000] phy_free_head is 0x1c12000!!!
- [ 14.070000] phy_free_tail_phy is 0x1c13ff0!!!
- [ 14.070000] txd_pool=a1c18000 phy_txd_pool=01C18000
- [ 14.080000] ei_local->skb_free start address is 0x9beb26dc.
- [ 14.080000] free_txd: 01c18010, ei_local->cpu_ptr: 01C18000
- [ 14.090000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 14.090000] ----------------+---------+--------
- [ 14.100000] 0xa1c18000 0x01C18000 0x01C18000
- [ 14.100000]
- [ 14.100000] phy_qrx_ring = 0x01c11000, qrx_ring = 0xa1c11000
- [ 14.110000]
- [ 14.110000] phy_rx_ring0 = 0x01c14000, rx_ring0 = 0xa1c14000
- [ 14.140000] MT7530 Reset Completed!!
- [ 14.150000] change HW-TRAP to 0x17c8f
- [ 14.150000] set LAN/WAN LLLLW
- [ 14.160000] GMAC1_MAC_ADRH -- : 0x0000ec41
- [ 14.160000] GMAC1_MAC_ADRL -- : 0x180f3863
- [ 14.170000] GDMA2_MAC_ADRH -- : 0x0000ec41
- [ 14.170000] GDMA2_MAC_ADRL -- : 0x180f3864
- [ 14.180000] eth1: ===> VirtualIF_open
- [ 14.180000] MT7621 GE2 link rate to 1G
- [ 14.190000] CDMA_CSG_CFG = 81000000
- [ 14.190000] GDMA1_FWD_CFG = 20710000
- [ 14.190000] GDMA2_FWD_CFG = 20710000
- [ 14.450000] UBI: attaching mtd12 to ubi1
- [ 15.980000] UBI: scanning is finished
- [ 16.000000] UBI: attached mtd12 (name "overlay", size 165 MiB) to ubi1
- [ 16.010000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 16.020000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 16.020000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 16.030000] UBI: good PEBs: 1324, bad PEBs: 0, corrupted PEBs: 0
- [ 16.030000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 16.040000] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image seque nce number: 520830068
- [ 16.050000] UBI: available PEBs: 0, total reserved PEBs: 1324, PEBs reserved for bad PEB handling: 40
- [ 16.060000] UBI: background thread "ubi_bgt1d" started, PID 626
- [ 16.070000] UBIFS: background thread "ubifs_bgt1_0" started, PID 628
- [ 16.150000] UBIFS: recovery needed
- [ 16.300000] UBIFS: recovery completed
- [ 16.310000] UBIFS: mounted UBI device 1, volume 0, name "data"
- [ 16.310000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes : 2048 bytes/2048 bytes
- [ 16.320000] UBIFS: FS size: 161005568 bytes (153 MiB, 1268 LEBs), journal siz e 8126464 bytes (7 MiB, 64 LEBs)
- [ 16.330000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
- [ 16.340000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C29A8802-C133- 432C-93BC-819BD9A2300B, small LPT model
- [ 17.470000] led=13, on=4000, off=1, blinks,=1, reset=41, time=4000
- [ 17.470000] ESW: Link Status Changed - Port3 Link UP,1000Mbps,Full Duplex
- [ 17.760000] ra2880stop()...Done
- [ 17.760000] eth1: ===> VirtualIF_close
- [ 17.770000] Free TX/RX Ring Memory!
- [ 17.970000] MIWIFI crash syslog initialized
- [ 18.940000] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 19.000000] tun: Universal TUN/TAP device driver, 1.6
- [ 19.000000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 19.020000] Mirror/redirect action on
- [ 19.040000] u32 classifier
- [ 19.050000] input device check on
- [ 19.050000] Actions configured
- [ 19.170000] ip_gre: GRE over IPv4 tunneling driver
- [ 19.210000] xt_time: kernel timezone is +0800
- [ 19.300000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 19.580000] ip_set: protocol 6
- [ 19.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 19.690000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 19.700000] Traffic lan port is eth0
- [ 19.760000] dev_redirect load success.
- [ 21.080000] ChipOpsMCUHook
- [ 21.400000] ChipOpsMCUHook
- [ 23.840000] FFFFFFEC:41:18: F:38:63
- [ 23.840000] Raeth v3.1 (Tasklet)
- [ 23.840000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- [ 23.850000] phy_free_head is 0x1c6e000!!!
- [ 23.860000] phy_free_tail_phy is 0x1c6fff0!!!
- [ 23.860000] txd_pool=a1c70000 phy_txd_pool=01C70000
- [ 23.870000] ei_local->skb_free start address is 0x9beb26dc.
- [ 23.870000] free_txd: 01c70010, ei_local->cpu_ptr: 01C70000
- [ 23.880000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 23.880000] ----------------+---------+--------
- [ 23.890000] 0xa1c70000 0x01C70000 0x01C70000
- [ 23.890000]
- [ 23.890000] phy_qrx_ring = 0x01c69000, qrx_ring = 0xa1c69000
- [ 23.900000]
- [ 23.900000] phy_rx_ring0 = 0x01c78000, rx_ring0 = 0xa1c78000
- [ 23.930000] MT7530 Reset Completed!!
- [ 23.940000] change HW-TRAP to 0x17c8f
- [ 23.950000] set LAN/WAN LLLLW
- [ 23.950000] GMAC1_MAC_ADRH -- : 0x0000ec41
- [ 23.960000] GMAC1_MAC_ADRL -- : 0x180f3863
- [ 23.960000] eth1: ===> VirtualIF_open
- [ 23.970000] MT7621 GE2 link rate to 1G
- [ 23.970000] CDMA_CSG_CFG = 81000000
- [ 23.970000] GDMA1_FWD_CFG = 20710000
- [ 23.970000] GDMA2_FWD_CFG = 20710000
- [ 23.970000] device eth0 entered promiscuous mode
- [ 23.970000] br-lan: port 1(eth0) entered forwarding state
- [ 23.970000] br-lan: port 1(eth0) entered forwarding state
- [ 23.970000] ifb is opened now.
- [ 23.980000] eth1: ===> VirtualIF_open
- [ 25.970000] br-lan: port 1(eth0) entered forwarding state
- [ 27.280000] led=13, on=4000, off=1, blinks,=1, reset=4000, time=4000
- [ 27.280000] ESW: Link Status Changed - Port3 Link UP,1000Mbps,Full Duplex
- [ 32.880000] nf_conntrack: automatic helper assignment is deprecated and it wi ll be removed soon. Use the iptables CT target to attach helpers instead.
- [ 32.970000] fdb_enable()
- [ 33.940000] device wl1 entered promiscuous mode
- [ 33.950000] br-lan: port 2(wl1) entered forwarding state
- [ 33.950000] br-lan: port 2(wl1) entered forwarding state
- [ 35.950000] br-lan: port 2(wl1) entered forwarding state
- [ 40.990000] fdb_enable()
- [ 41.950000] device wl0 entered promiscuous mode
- [ 41.950000] br-lan: port 3(wl0) entered forwarding state
- [ 41.960000] br-lan: port 3(wl0) entered forwarding state
- [ 42.020000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 43.960000] br-lan: port 3(wl0) entered forwarding state
- [ 45.870000] nf_tcp_proxy: module license 'Proprietary' taints kernel.
- [ 45.880000] Disabling lock debugging due to kernel taint
- [ 45.880000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 45.890000] proxy_device_init, get br-lan ifindex=10
- [ 45.890000] tproxy_device_event, br-lan UP ifindex=10
- [ 45.890000] tcpproxy_init, succeed!
- [ 45.990000] init_reap_url_netlink, register genl successfully!
- [ 48.430000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 58.060000] Tuxera FAT 12/16/32 driver version 3015.1.29 [Flags: R/W MODULE].
- [ 58.070000] Built against headers 3.10.14 #5 SMP Tue Aug 23 14:09:43 CST 2016 mips
- [ 58.070000] Running on kernel 3.10.14 #1 MiWiFi-R3P-2.13.65 SMP Fri Aug 25 15 :07:33 CST 2017 mips
- [ 58.080000] WARNING: Running kernel does not match configured kernel headers the driver was built with! The driver needs to be rebuilt with the correct kern el headers!
- [ 58.510000] tfat: fail_safe is enabled
- [ 58.510000] tfat: cluster_heap_lbo 0xe55400
- [ 58.510000] tfat: 10 blkbits for normal inodes
- [ 58.520000] tfat: fat start lbo 0x4000
- [ 58.520000] tfat: 9 blkbits for main FAT32 inode
- [ 58.530000] tfat: cluster size 32768
- [ 58.730000] tfat info: FAT32 volume name 'QWE', version 0.0.
- [ 58.730000] tfat warning (device sda1, pid 4181): fat_fill_super(): FAT volum e QWE is dirty. You should unmount and repair it.
- [ 61.250000] Ralink HW NAT Module Enabled
- [ 61.260000] eth0 ifindex =3
- [ 61.270000] eth1 ifindex =5
- [ 61.270000] *hwnat reg dev ******* set dev[lo]->ifindex = 1
- [ 61.270000] *hwnat reg dev ******* set dev[ifb0]->ifindex = 2
- [ 61.280000] *hwnat reg dev ******* set dev[wl1]->ifindex = 8
- [ 61.290000] *hwnat reg dev ******* set dev[wl0]->ifindex = 9
- [ 61.290000] *hwnat reg dev ******* set dev[br-lan]->ifindex = 10
- [ 61.300000] *hwnat reg dev ******* set dev[wl2]->ifindex = 11
- [ 65.860000] Samba Netfilter Hook Enabled
- [ 69.050000] init_netlink, create socket ok.
- [ 69.060000] Module MiNetlink initialized
- [ 69.060000] init_webfilter_match, succeed!
- [ 69.460000] webfilter_htable_purge, purge 0 rules, total rule nums=0
- [ 69.460000] webfilter_htable_purge, purge 0 rules, total rule nums=0
- [ 74.630000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 74.860000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 79.280000] led=6, on=1, off=4000, blinks,=1, reset=1, time=4000
- [ 79.300000] led=10, on=1, off=4000, blinks,=1, reset=1, time=4000
- [ 79.320000] led=8, on=4000, off=1, blinks,=1, reset=1, time=4000
- [ 82.000000] webfilter_purge_special, purge 0 rules, total rule nums=0
- [ 82.010000] webfilter_purge_special, purge 0 rules, total rule nums=0
- [ 322.080000] webfilter_purge_special, purge 0 rules, total rule nums=0
- [ 322.090000] webfilter_purge_special, purge 0 rules, total rule nums=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement