Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2016.09 (Oct 31 2016 - 11:49:45)
- DRAM: 512 MiB
- Failed to set core voltage! Can't set CPU frequency
- Trying to boot from MMC1
- U-Boot 2016.09 (Oct 31 2016 - 11:49:45 +0800) Allwinner Technology
- CPU: Allwinner H3 (SUN8I 1680)
- Model: Xunlong Orange Pi PC
- I2C: ready
- DRAM: 512 MiB
- MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: phy interface0
- eth0: ethernet@1c30000
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot.scr
- reading /boot.scr
- 538 bytes read in 19 ms (27.3 KiB/s)
- ## Executing script at 43100000
- gpio: pin PA17 (gpio 17) value is 1
- reading script.bin
- 34864 bytes read in 31 ms (1.1 MiB/s)
- reading uImage
- 4678576 bytes read in 417 ms (10.7 MiB/s)
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.4.39
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4678512 Bytes = 4.5 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Using machid 0x1029 from environment
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 512MB
- ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
- ion_reserve_select: ion chipid [0x2004620!
- ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.39 (orange@orange-All-Series) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #35 SMP PREEMPT Mon 6
- [ 0.000000] cma: CMA: reserved 160 MiB at 56000000
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c101a000 s11264 r8192 d13312 u32768
- [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 init=/sbin/init rootwait rootfstype=ext4 panic=10 consoleblank=0 enforcing=0 loglevel=7
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 512MB = 512MB total
- [ 0.000000] Memory: 342948k/342948k available, 181340k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc08e6014 (9081 kB)
- [ 0.000000] .init : 0xc08e7000 - 0xc0938c00 ( 327 kB)
- [ 0.000000] .data : 0xc093a000 - 0xc09b3e10 ( 488 kB)
- [ 0.000000] .bss : 0xc09b45c4 - 0xc0b878f0 (1869 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.002383] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.002555] pid_max: default: 32768 minimum: 301
- [ 0.003593] Mount-cache hash table entries: 512
- [ 0.006148] Initializing cgroup subsys debug
- [ 0.006240] Initializing cgroup subsys cpuacct
- [ 0.006316] Initializing cgroup subsys freezer
- [ 0.006457] CPU: Testing write buffer coherency: ok
- [ 0.006628] ftrace: allocating 23912 entries in 71 pages
- [ 0.080529] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.080627] [sunxi_smp_prepare_cpus] enter
- [ 0.080740] Setting up static identity map for 0x40649b78 - 0x40649bd0
- [ 0.083041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.083211] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.091124] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.100286] Brought up 4 CPUs
- [ 0.100477] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.101886] devtmpfs: initialized
- [ 0.113402] wakeup src cnt is : 1.
- [ 0.113558] sunxi pm init
- [ 0.114566] pinctrl core: initialized pinctrl subsystem
- [ 0.125015] NET: Registered protocol family 16
- [ 0.126798] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.126798] script_sysfs_init success
- [ 0.126798] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.128726] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.130723] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.130821] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.131648] script config pll_video to 297 Mhz
- [ 0.131724] script config pll_de to 864 Mhz
- [ 0.131828] script config pll_ve to 402 Mhz
- [ 0.150696] bio: create slab <bio-0> at 0
- [ 0.151178] [ARISC] :sunxi-arisc driver v1.04
- [ 0.174514] [ARISC] :arisc version: [v0.1.58.3]
- [ 0.251916] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
- [ 0.261227] SCSI subsystem initialized
- [ 0.261787] usbcore: registered new interface driver usbfs
- [ 0.262035] usbcore: registered new interface driver hub
- [ 0.262161] usbcore: registered new device driver usb
- [ 0.262161] twi_chan_cfg()340 - [twi0] has no twi_regulator.
- [ 0.262161] twi_chan_cfg()340 - [twi1] has no twi_regulator.
- [ 0.262161] twi_chan_cfg()340 - [twi2] has no twi_regulator.
- [ 0.262161] Linux video capture interface: v2.00
- [ 0.262161] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.262844] Bluetooth: Core ver 2.16
- [ 0.262975] NET: Registered protocol family 31
- [ 0.263035] Bluetooth: HCI device and connection manager initialized
- [ 0.263108] Bluetooth: HCI socket layer initialized
- [ 0.263169] Bluetooth: L2CAP socket layer initialized
- [ 0.263291] Bluetooth: SCO socket layer initialized
- [ 0.263921] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.264116] Switching to clocksource arch_sys_counter
- [ 0.320929] FS-Cache: Loaded
- [ 0.321575] CacheFiles: Loaded
- [ 0.352044] NET: Registered protocol family 2
- [ 0.352806] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.354312] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.355021] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- [ 0.355669] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.355740] TCP: reno registered
- [ 0.355798] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.355902] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.356722] NET: Registered protocol family 1
- [ 0.357724] RPC: Registered named UNIX socket transport module.
- [ 0.357801] RPC: Registered udp transport module.
- [ 0.357857] RPC: Registered tcp transport module.
- [ 0.357912] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.359190] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.359506] sunxi_reg_init enter
- [ 0.361488] audit: initializing netlink socket (disabled)
- [ 0.361637] type=2000 audit(0.360:1): initialized
- <6[ 0.369454] fuse init (API version 7.18)
- [ 0.370778] msgmni has been set to 893
- [ 0.374459] io scheduler noop registered
- [ 0.374527] io scheduler deadline registered
- [ 0.374833] io scheduler cfq registered (default)
- [ 0.375674] [DISP]disp_module_init
- [ 0.376575] cmdline,init_disp=
- [ 0.377114] cmdline,disp=
- [ 0.396627] [DISP] Fb_map_kernel_logo,line:989:Fb_map_kernel_logo failed!sel=0, output_type=4, lcd_reg=0, hdmi_reg=0
- [ 0.401709] [DISP]disp_module_init finish
- [ 0.402255] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
- [ 0.402342] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
- [ 0.402420] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
- [ 0.403591] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.403673] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.403753] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 0.515330] console [ttyS0] enabled
- [ 1.017911] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 1.121855] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
- [ 1.130596] sunxi_di_init get di_by_pass err!
- [ 1.147332] loop: module loaded
- [ 1.151016] Get boot type cmd line fail
- [ 1.156416] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
- [ 1.163638] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
- [ 1.170881] tun: Universal TUN/TAP device driver, 1.6
- [ 1.176561] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.185742] PPP generic driver version 2.4.2
- [ 1.191060] PPP BSD Compression module registered
- [ 1.196356] PPP Deflate Compression module registered
- [ 1.203926] PPP MPPE Compression module registered
- [ 1.209336] NET: Registered protocol family 24
- [ 1.214441] PPTP driver version 0.8.5
- [ 1.219069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.246688] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.255782] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 1.265665] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 1.290086] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 1.298295] hub 1-0:1.0: USB hub found
- [ 1.302610] hub 1-0:1.0: 1 port detected
- [ 1.328057] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.337146] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
- [ 1.346885] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
- [ 1.370085] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
- [ 1.378234] hub 2-0:1.0: USB hub found
- [ 1.382553] hub 2-0:1.0: 1 port detected
- [ 1.407997] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.417092] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
- [ 1.426903] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
- [ 1.450085] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
- [ 1.458142] hub 3-0:1.0: USB hub found
- [ 1.462445] hub 3-0:1.0: 1 port detected
- [ 1.487922] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.497018] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
- [ 1.506725] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
- [ 1.530082] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
- [ 1.538226] hub 4-0:1.0: USB hub found
- [ 1.542528] hub 4-0:1.0: 1 port detected
- [ 1.547822] sunxi-ehci sunxi-ehci.4: remove, state 1
- [ 1.553529] usb usb4: USB disconnect, device number 1
- [ 1.561544] sunxi-ehci sunxi-ehci.4: USB bus 4 deregistered
- [ 1.577975] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.605095] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.613789] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
- [ 1.622402] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 1.685530] hub 4-0:1.0: USB hub found
- [ 1.689784] hub 4-0:1.0: 1 port detected
- [ 1.715134] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.723827] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
- [ 1.732438] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
- [ 1.795467] hub 5-0:1.0: USB hub found
- [ 1.799722] hub 5-0:1.0: 1 port detected
- [ 1.825158] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.833855] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 6
- [ 1.842481] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
- [ 1.905449] hub 6-0:1.0: USB hub found
- [ 1.909702] hub 6-0:1.0: 1 port detected
- [ 1.915122] Initializing USB Mass Storage driver...
- [ 1.921104] usbcore: registered new interface driver usb-storage
- [ 1.927928] USB Mass Storage support registered.
- [ 1.933298] usbcore: registered new interface driver ums-alauda
- [ 1.940157] usbcore: registered new interface driver ums-cypress
- [ 1.947069] usbcore: registered new interface driver ums-datafab
- [ 1.954046] usbcore: registered new interface driver ums_eneub6250
- [ 1.961195] usbcore: registered new interface driver ums-freecom
- [ 1.968103] usbcore: registered new interface driver ums-isd200
- [ 1.974983] usbcore: registered new interface driver ums-jumpshot
- [ 1.982037] usbcore: registered new interface driver ums-karma
- [ 1.988747] usbcore: registered new interface driver ums-onetouch
- [ 1.995855] usbcore: registered new interface driver ums-realtek
- [ 2.002830] usbcore: registered new interface driver ums-sddr09
- [ 2.009654] usbcore: registered new interface driver ums-sddr55
- [ 2.016641] usbcore: registered new interface driver ums-usbat
- [ 2.023591] usbcore: registered new interface driver usbserial
- [ 2.030211] usbserial: USB Serial Driver core
- [ 2.035238] usbcore: registered new interface driver option
- [ 2.041852] USB Serial support registered for GSM modem (1-port)
- [ 2.050076] file system registered
- [ 2.058349] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 2.066302] android_usb gadget: Number of LUNs=3
- [ 2.071587] lun0: LUN: removable file: (no medium)
- [ 2.077113] lun1: LUN: removable file: (no medium)
- [ 2.082681] lun2: LUN: removable file: (no medium)
- [ 2.089134] android_usb gadget: android_usb ready
- [ 2.096521] mousedev: PS/2 mouse device common for all mice
- [ 2.103493] ls_fetch_sysconfig_para: type err device_used = 0.
- [ 2.110304] =========script_get_err============
- [ 2.116123] [RTC] WARNING: Rtc time will be wrong!!
- [ 2.121693] [RTC] WARNING: use *internal OSC* as clock source
- [ 2.128867] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
- [ 2.136693] IR RC5(x) protocol handler initialized
- [ 2.142507] tscdev_init: tsc driver is disabled
- [ 2.148552] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
- [ 2.156053] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
- [ 2.167617] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
- [ 2.175301] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
- [ 2.181619] timeout_to_interv, line 167
- [ 2.185940] interv_to_timeout, line 189
- [ 2.190307] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
- [ 2.200750] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 2.211189] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
- [ 2.232711] usbcore: registered new interface driver usbhid
- [ 2.238990] usbhid: USB HID core driver
- [ 2.243892] ashmem: initialized
- [ 2.247539] logger: created 256K log 'log_main'
- [ 2.252746] logger: created 256K log 'log_events'
- [ 2.258118] logger: created 256K log 'log_radio'
- [ 2.263415] logger: created 256K log 'log_system'
- [ 2.269080] sunxi_oops: heming add OOPS_INFO_ADDR = -20
- [ 2.279533] asoc: sndcodec <-> sunxi-codec mapping ok
- [ 2.290400] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
- [ 2.297673] pktgen: Packet Generator for packet performance testing. Version: 2.74
- [ 2.306652] u32 classifier
- [ 2.309668] Actions configured
- [ 2.313476] Netfilter messages via NETLINK v0.30.
- [ 2.318793] nf_conntrack version 0.5.0 (7150 buckets, 28600 max)
- [ 2.325974] ctnetlink v0.93: registering with nfnetlink.
- [ 2.331963] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 2.339706] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 2.346576] xt_time: kernel timezone is -0000
- [ 2.351632] IPv4 over IPv4 tunneling driver
- [ 2.356813] gre: GRE over IPv4 demultiplexor driver
- [ 2.362273] ip_gre: GRE over IPv4 tunneling driver
- [ 2.368315] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.374490] arp_tables: (C) 2002 David S. Miller
- [ 2.379698] TCP: cubic registered
- [ 2.383451] Initializing XFRM netlink socket
- [ 2.388589] NET: Registered protocol family 10
- [ 2.394967] Mobile IPv6
- [ 2.397730] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.404006] IPv6 over IPv4 tunneling driver
- [ 2.409893] NET: Registered protocol family 17
- [ 2.414912] NET: Registered protocol family 15
- [ 2.420054] Bluetooth: RFCOMM TTY layer initialized
- [ 2.425496] Bluetooth: RFCOMM socket layer initialized
- [ 2.431238] Bluetooth: RFCOMM ver 1.11
- [ 2.435409] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 2.441400] Bluetooth: BNEP filters: protocol multicast
- [ 2.447279] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 2.454064] L2TP core driver, V2.0
- [ 2.457866] PPPoL2TP kernel driver, V2.0
- [ 2.462256] L2TP IP encapsulation support (L2TPv3)
- [ 2.467663] L2TP netlink interface
- [ 2.471500] L2TP ethernet pseudowire support (L2TPv3)
- [ 2.477406] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 2.485968] ThumbEE CPU extension supported.
- [ 2.490752] Registering SWP/SWPB emulation handler
- [ 2.496100] sunxi_bootup_extend_init: bootup extend state 1
- [ 2.503385] cmdline,disp=
- [ 2.537981] cmdline,disp=
- [ 2.541365] [DISP] disp_init_tv,line:540:screen 0 do not support TV TYPE!
- [ 2.541391] [DISP] bsp_disp_tv_register,line:946:'ptv is null
- [ 2.555486] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:14:54 UTC (894)
- [ 2.564433] ths_fetch_sysconfig_para: type err device_used = 1.
- [ 2.572881] CPU Budget:Register notifier
- [ 2.577257] CPU Budget:register Success
- [ 2.581571] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 2.596419] ALSA device list:
- [ 2.599731] #0: audiocodec
- [ 2.603007] #1: sndhdmi
- [ 2.606189] Waiting for root device /dev/mmcblk0p2...
- [ 3.130075] [DISP] disp_hdmi_set_detect,line:405:hdmi0's mgr is NULL
- [ 3.767288] *******************Try sdio*******************
- [ 3.774285] mmc0: req failed (CMD5): -110, retrying...
- [ 3.780868] mmc0: req failed (CMD5): -110, retrying...
- [ 3.787439] mmc0: req failed (CMD5): -110, retrying...
- [ 3.794030] *******************Try sd *******************
- [ 3.868038] mmc0: new high speed SDHC card at address aaaa
- [ 3.874754] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
- [ 3.881196] mmcblk0: p1 p2
- [ 3.885167] *******************sd init ok*******************
- [ 3.943084] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.952192] VFS: Mounted root (ext4 filesystem) on device 179:2.
- [ 3.959852] devtmpfs: mounted
- [ 3.963551] Freeing init memory: 324K
- [ 4.427889] init: plymouth-upstart-bridge main process (95) terminated with status 1
- [ 4.436689] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.476003] init: plymouth-upstart-bridge main process (105) terminated with status 1
- [ 4.484966] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.521507] init: plymouth-upstart-bridge main process (108) terminated with status 1
- [ 4.530531] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.539448] init: ureadahead main process (98) terminated with status 5
- [ 6.095973] [XRADIO] Driver Label:L34M.01.08.0002 Nov 4 2016 11:22:27
- [ 6.103648] [XRADIO] Allocated hw_priv @ d48d50e0
- [ 6.109739] xradio wlan power on
- [ 6.270365] [XRADIO] Detect SDIO card 1
- [ 6.448328] systemd-udevd[294]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
- [ 6.455367] systemd-udevd[291]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
- * Starting Mount filesystems on boot[ OK ]
- * Starting Signal sysvinit that the rootfs is mounted[ OK ]
- * Starting Populate /dev filesystem[ OK ]
- * Stopping Populate /dev filesystem[ OK ]
- * Starting Clean /tmp directory[ OK ]
- * Starting Populate and link to /run filesystem[ OK ]
- * Stopping Populate and link to /run filesystem[ OK ]
- * Stopping Clean /tmp directory[ OK ]
- * Stopping Track if upstart is running in a container[ OK ]
- * Starting Initialize or finalize resolvconf[ OK ]
- * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
- * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
- * Starting Signal sysvinit that local filesystems are mounted[ OK ]
- * Starting restore software rfkill state[ OK ]
- * Starting Bridge udev events into upstart[ OK ]
- * Stopping restore software rfkill state[ OK ]
- * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
- * Starting device node and kernel event manager[ OK ]
- * Starting flush early job output to logs[ OK ]
- * Stopping Mount filesystems on boot[ OK ]
- * Stopping flush early job output to logs[ OK ]
- * Starting load modules from /etc/modules[ OK ]
- * Starting cold plug devices[ OK ]
- * Starting log initial device creation[ OK ]
- * Starting Bridge file events into upstart[ OK ]
- * Starting D-Bus system message bus[ OK ]
- * Starting system logging daemon[ OK ]
- * Starting userspace bootsplash[ OK ]
- * Starting SystemD login management service[ OK ]
- * Starting bluetooth daemon[ OK ]
- * Stopping userspace bootsplash[ OK ]
- * Starting Send an event to indicate plymouth is up[ OK ]
- * Starting Uncomplicated firewall[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device[ OK ]
- * Starting mDNS/DNS-SD daemon[ OK ]
- * Stopping Send an event to indicate plymouth is up[ OK ]
- * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
- * Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Stopping cold plug devices[ OK ]
- * Starting configure network device[ OK ]
- * Starting configure network device[ OK ]
- * Starting configure network device[ OK ]
- * Starting configure network device[ OK ]
- * Stopping log initial device creation[ OK ]
- * Starting configure network device security[ OK ]
- * Starting enable remaining boot-time encrypted block devices[ OK ]
- * Starting Mount network filesystems[ OK ]
- * Starting Failsafe Boot Delay[ OK ]
- [ 8.290286] xradio wlan power off
- * Starting configure virtual network devices[ OK ]
- [ 8.345354] [XRADIO] Remove SDIO card 1
- [ 8.359698] [SBUS_ERR] sdio probe timeout!
- [ 8.364439] [XRADIO_ERR] sbus_sdio_init failed
- * Starting mDNS/DNS-SD daemon[ OK ]
- * Starting configure network device[ OK ]
- * Stopping load modules from /etc/modules[ OK ]
- * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
- * Stopping Failsafe Boot Delay[ OK ]
- [ OK ]rting early crypto disks...
- * Starting System V initialisation compatibility[ OK ]
- * Starting modem connection manager[ OK ]
- * Starting configure network device security[ OK ]
- * Stopping Mount network filesystems[ OK ]
- * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[fail]
- [ OK ]ting up X socket directories...
- * Starting mDNS/DNS-SD daemon[ OK ]
- * Stopping System V initialisation compatibility[ OK ]
- * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
- * Starting network connection manager[ OK ]
- [ OK ]rting NTP server ntpd
- [ OK ]toring resolver state...
- * Starting System V runlevel compatibility[ OK ]
- * Starting regular background program processing daemon[ OK ]
- * Starting anac(h)ronistic cron[ OK ]
- * Starting save kernel messages[ OK ]
- * Starting OpenSSH server[ OK ]
- * Starting CPU interrupts balancing daemon[ OK ]
- * Stopping save kernel messages[ OK ]
- Ubuntu 14.04.1 LTS orangepi ttyS0
- orangepi login: root
- Password:
- Last login: Thu Jan 1 08:00:28 CST 1970 on ttyS0
- Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.4.39 armv7l)
- * Documentation: https://help.ubuntu.com/
- New release '16.04.1 LTS' available.
- Run 'do-release-upgrade' to upgrade to it.
- root@orangepi:~# uname -a
- Linux orangepi 3.4.39 #35 SMP PREEMPT Mon Nov 7 17:54:42 CST 2016 armv7l armv7l armv7l GNU/Linux
- root@orangepi:~# modinfo xradio_wlan
- filename: /lib/modules/3.4.39/xradio_wlan.ko
- alias: xradio_core
- license: GPL
- description: XRadioTech WLAN driver core
- author: XRadioTech
- srcversion: EE504CDAD99C9B5CF34A68C
- depends:
- intree: Y
- vermagic: 3.4.39 SMP preempt mod_unload modversions ARMv7 p2v8
- parm: macaddr:First MAC address (charp)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement