[2020-01-20 05:07:31] [Output] : ★ Marcus Wilburn drives the Honda Civic between a two post lift and hops out before adjusting the
[2020-01-20 05:07:46] [Output] : ★ arms on the driver side beneath the pinch welds of the car, moving to the left side and      ((Marcus Wilburn))
[2020-01-20 05:07:57] [Output] : ★ lining the passenger side arms beneath the pinch welds as well.      ((Marcus Wilburn))
[2020-01-20 05:08:15] [Output] : ★ Marcus Wilburn approaches the work bench and emits a sigh as he grabs his wrench and set of
[2020-01-20 05:08:25] [Output] : ★ different size sockets.      ((Marcus Wilburn))
[2020-01-20 05:08:37] [Output] : ★ Marcus Wilburn makes his way back to the car and places the ratchet and the sockets down in
[2020-01-20 05:08:45] [Output] : ★ front of the hood before opening the driver door and leaning in to pull the hood release      ((Marcus Wilburn))
[2020-01-20 05:08:48] [Output] : ★ handle.      ((Marcus Wilburn))
[2020-01-20 05:08:58] [Output] : ★ The hood pops open, Marcus walks up to the front and slides his fingers beneath the hood      ((Marcus Wilburn))
[2020-01-20 05:09:06] [Output] : ★ before raising it up and fixing it with the hood prop.      ((Marcus Wilburn))
[2020-01-20 05:09:51] [Output] : ★ Marcus Wilburn bends over and picks up the ratchet as he fits it with the right size socket and undoes the
[2020-01-20 05:09:59] [Output] : ★ two bolts securing the exhaust heat shield.      ((Marcus Wilburn))
[2020-01-20 05:10:07] [Output] : ★ Marcus Wilburn takes off the exhaust heat shield and tosses it away from the car as he reveals the
[2020-01-20 05:10:12] [Output] : ★ exhaust manifold.      ((Marcus Wilburn))
[2020-01-20 05:10:21] [Output] : ★ Marcus Wilburn replaces the socket on the ratchet and proceeds to undo the bolts securing the
[2020-01-20 05:10:31] [Output] : ★ exhaust manifold to the engine head.      ((Marcus Wilburn))
[2020-01-20 05:13:08] [Output] : ★ Marcus Wilburn puts the ratchet aside and retrives a flat head screwdriver as he starts unscrewing
[2020-01-20 05:15:10] [Output] : ★ the screws mounting the front bumper in place.      ((Marcus Wilburn))
[2020-01-20 05:16:43] [Output] : ★ Marcus Wilburn then unscrews the ones securing the bumper to the plastic splash shield.
[2020-01-20 05:17:09] [Output] : ★ Marcus Wilburn wiggles the bumper off of it's place and carelessly tosses it to the side to make clearance.
[2020-01-20 05:18:06] [Output] : ★ Marcus Wilburn uses the screwdriver to undo the pins on the wire harness to the radiator fan.
[2020-01-20 05:18:31] [Output] : ★ Marcus Wilburn puts away the screwdriver and reaches out for the ratchet, using it to loosen the bolts
[2020-01-20 05:18:40] [Output] : ★ on each corner of the radiator.      ((Marcus Wilburn))
[2020-01-20 05:19:08] [Output] : ★ Marcus Wilburn puts the wrench on the strut tower and grabs the top of the radiator as he fishes out the
[2020-01-20 05:19:20] [Output] : ★ engine bay with a jiggling motion.      ((Marcus Wilburn))
[2020-01-20 05:20:22] [Output] : ★ Marcus Wilburn lets go of the radiator when the hoses connected to it resist the movement.
[2020-01-20 05:20:43] [Output] : ★ Marcus Wilburn grabs the screw driver and loosens the screws on the clamps securing the hoses
[2020-01-20 05:21:02] [Output] : ★ to the radiator, he puts the screwdriver aside and pulls the radiator out of the bay      ((Marcus Wilburn))
[2020-01-20 05:21:12] [Output] : ★ to rest it against the wall in the garage.      ((Marcus Wilburn))
[2020-01-20 05:21:59] [Output] : ★ Marcus Wilburn sighs as he realizes how restless he is, he tried to pull the radiator out the bay without
[2020-01-20 05:22:07] [Output] : ★ removing the hoses connected to it.      ((Marcus Wilburn))
[2020-01-20 05:22:49] [Output] : ★ Marcus Wilburn mumbles as he grabs the ratchet and takes a knee in order to undo the two bolts
[2020-01-20 05:23:43] [Output] : ★ securing the exhaust pipe's flange to the bottom of the exhaust manifold.      ((Marcus Wilburn))
[2020-01-20 05:24:10] [Output] : ★ Marcus Wilburn pushes himself up and uses both hands to pull the exhaust manifold out of its place
[2020-01-20 05:24:36] [Output] : ★ as it's now completely loose, he tosses it near the rest of the junk.      ((Marcus Wilburn))
[2020-01-20 05:25:28] [Output] : ★ Marcus Wilburn grabs the screwdriver and uses it to carelessly tear the tape on the turbo kit carton box.
[2020-01-20 05:25:43] [Output] : ★ Marcus Wilburn pulls the turbo manifold out of the box and undoes the wrapping before head back to
[2020-01-20 05:25:50] [Output] : ★ the car and placing it in the exhaust manifold's place to test fit it.      ((Marcus Wilburn))
[2020-01-20 05:25:56] [Output] : ★ Marcus Wilburn nods a couple times as he fishes out a ziploc bag of bolts from the turbo kit's box.
[2020-01-20 05:30:12] [Output] : ★ Marcus Wilburn refits the turbo manifold in the exhaust manifold's spot and inserts the bolts in the
[2020-01-20 05:30:25] [Output] : ★ holes as he slightly tightens them with his bare fingers.      ((Marcus Wilburn))
[2020-01-20 05:30:34] [Output] : ★ Marcus Wilburn grabs the ratchet and fully secures the said bolts to fix the turbo manifold in place.
[2020-01-20 05:30:42] [Output] : ★ Marcus Wilburn extracts the turbo compressor itself out of the box and slides it through the studs on the
[2020-01-20 05:30:49] [Output] : ★ turbo manifold before hand tightening the lugs and washers that came with it.      ((Marcus Wilburn))
[2020-01-20 05:30:56] [Output] : ★ Marcus Wilburn scoops up the ratchet and uses it to tighten the said lugs in order to firmly secure the
[2020-01-20 05:31:03] [Output] : ★ compressor housing to the turbo manifold.      ((Marcus Wilburn))
[2020-01-20 05:32:26] [Output] : ★ Marcus Wilburn admires the turbo housing sitting on the turbo manifold, he draws a rather wide smile as
[2020-01-20 05:32:35] [Output] : ★ he checks it out from different angles.      ((Marcus Wilburn))
[2020-01-20 05:33:38] [Output] : ★ Marcus Wilburn grabs a remote to the two post lift and pushes a button to raise the car up, enough
[2020-01-20 05:33:51] [Output] : ★ for him to get under it.      ((Marcus Wilburn))
[2020-01-20 05:35:09] [Output] : ★ Marcus Wilburn steps beneath the car with his ratchet, he unplugs the O2 sensor and starts loosening
[2020-01-20 05:35:31] [Output] : ★ the bolts securing the exhaust assembly hangers to the frame of the Honda.      ((Marcus Wilburn))
[2020-01-20 05:35:53] [Output] : ★ Marcus Wilburn stands aside as he does so, making enough space for the exhaust assembly to fall
[2020-01-20 05:36:05] [Output] : ★ down without hitting his feet.      ((Marcus Wilburn))
[2020-01-20 05:36:36] [Output] : ★ Marcus Wilburn finishes undoing the bolts of the exhaust hangers, the system falls after Marcus slightly
[2020-01-20 05:36:55] [Output] : ★ jiggles it, he bends over and grabs the exhaust pipe as he drags it away from beneath      ((Marcus Wilburn))
[2020-01-20 05:36:57] [Output] : ★ the car.      ((Marcus Wilburn))
[2020-01-20 05:39:35] [Output] : ★ Marcus Wilburn pushes a button on the lift remote to lower the car down, he makes his way to the
[2020-01-20 05:40:06] [Output] : ★ bay and yawns as he takes a moment to assess the situation and figure his next move.      ((Marcus Wilburn))
[2020-01-20 05:41:14] [Output] : ★ Marcus Wilburn grabs a plastic container and slides it beneath the oil pan before taking a knee and
[2020-01-20 05:41:30] [Output] : ★ using a 10mm socket on his ratchet to loosen the drain bolt.      ((Marcus Wilburn))
[2020-01-20 05:42:02] [Output] : ★ Marcus Wilburn allows the oil to drain in the plastic container, he lights up a cigarette and waits
[2020-01-20 05:42:06] [Output] : ★ patiently.      ((Marcus Wilburn))
[2020-01-20 05:42:55] [Output] : ★ Marcus Wilburn puffs on his cigarette as he narrows his eyes at the turbo housing.
[2020-01-20 05:43:43] [Output] : ★ Marcus Wilburn drops the cancer stick down and stomps it before approaching the vehicle and
[2020-01-20 05:44:01] [Output] : ★ using the remote to lift it up about a meter for clearance.      ((Marcus Wilburn))
[2020-01-20 05:44:33] [Output] : ★ Marcus Wilburn kneels down and pulls the plastic container away as he using the 10mm socket and ratchet
[2020-01-20 05:44:53] [Output] : ★ to loosen the bolts securing the oil pan to the bottom of the D16 engine.      ((Marcus Wilburn))
[2020-01-20 05:45:11] [Output] : ★ Marcus Wilburn grabs the oil pan and heads to the workbench as he rests it there, he grabs a
[2020-01-20 05:45:25] [Output] : ★ clean fiber towel and wipes off the remaining oil in it.      ((Marcus Wilburn))
[2020-01-20 05:46:24] [Output] : ★ Marcus Wilburn cleans the oil pan and grabs an electric drill as he fits it with a bit.
[2020-01-20 05:46:46] [Output] : ★ Marcus Wilburn turns it on and pulls the trigger in order to steadily drill a hole in the oil pan.
[2020-01-20 05:47:13] [Output] : ★ Marcus Wilburn grabs the oil tap from the turbo kit carton box and inserts it into the hole he drilled.
[2020-01-20 05:48:32] [Output] : ★ Marcus Wilburn nods as he appears satisfied with the tight fit, he takes it off and applies some
[2020-01-20 05:48:49] [Output] : ★ teflon tape to the tap's thread to avoid any future leaks.      ((Marcus Wilburn))
[2020-01-20 05:49:36] [Output] : ★ Marcus Wilburn fits the tap again and secures it before scratching the old gasket on the oil pan.
[2020-01-20 05:50:19] [Output] : ★ Marcus Wilburn grabs an RTV tube and squeezes it as he uses his finger to spread it around the
[2020-01-20 05:50:38] [Output] : ★ oil pan connection surface, creating a new gasket.      ((Marcus Wilburn))
[2020-01-20 05:50:55] [Output] : ★ Marcus Wilburn takes the pan back to the car and fits it in place as he hand tightens the bolts.
[2020-01-20 05:51:19] [Output] : ★ Marcus Wilburn then uses the ratchet and 10mm socket to fully tighten them in a cristian cross pattern to
[2020-01-20 05:51:23] [Output] : ★ avoid leaks.      ((Marcus Wilburn))
[2020-01-20 05:55:19] [Output] : ★ Marcus Wilburn pushes himself up and takes the philips head screwdriver, using it to undo the lid of the
[2020-01-20 05:55:27] [Output] : ★ airbox.      ((Marcus Wilburn))
[2020-01-20 05:56:09] [Output] : ★ Marcus Wilburn scratches his head for a moment before placing the philips head screwdriver aside
[2020-01-20 05:56:43] [Output] : ★ and getting the flat head one, using it to undo the clamp securing the OEM intake tube      ((Marcus Wilburn))
[2020-01-20 05:56:58] [Output] : ★ to the throttle body.      ((Marcus Wilburn))
[2020-01-20 05:57:24] [Output] : ★ Marcus Wilburn grasps on the loose air tube and pulls as hard as he could, eventually breaking the
[2020-01-20 05:57:52] [Output] : ★ OEM airbox off of its place, he tosses it aside carelessly.      ((Marcus Wilburn))
[2020-01-20 06:01:48] [Output] : ★ Marcus Wilburn takes out all the intercooler silicon hoses that came with the kit along with a printed
[2020-01-20 06:03:21] [Output] : ★ diagram and installs the first piece's end to the throttle body, using a clamp to secure it      ((Marcus Wilburn))
[2020-01-20 06:03:25] [Output] : ★ in place.      ((Marcus Wilburn))
[2020-01-20 06:04:15] [Output] : ★ Marcus Wilburn grabs the intercooler itself and rests it on the car's frame where the bumper is
[2020-01-20 06:04:37] [Output] : ★ supposed to go, he continues routing the silicone hoses until he achives the connection      ((Marcus Wilburn))
[2020-01-20 06:05:40] [Output] : ★ from the throttle body to one side of the intercooler, securing the said hoses with the      ((Marcus Wilburn))
[2020-01-20 06:05:46] [Output] : ★ provided clamps.      ((Marcus Wilburn))
[2020-01-20 06:06:25] [Output] : ★ Marcus Wilburn makes a second connection running from the second side of the intercooler to
[2020-01-20 06:07:00] [Output] : ★ the turbine's air outlet.      ((Marcus Wilburn))
[2020-01-20 06:07:16] [Output] : ★ Marcus Wilburn fits clamps on the loose silicone hoses and tightens them with the screwdriver.
[2020-01-20 06:08:55] [Output] : ★ Marcus Wilburn yawns as he inspects the intercooler setup, looking for any mistakes he's done.
[2020-01-20 06:09:10] [Output] :  [English] Marcus Wilburn says: Looking good.
[2020-01-20 06:09:38] [Output] : ★ Marcus Wilburn opens a second carton box and takes out a cold air intake assembly, he fits the
[2020-01-20 06:10:02] [Output] : ★ hose onto the compressor's inlet and secures it with the provided clamp by tightening the      ((Marcus Wilburn))
[2020-01-20 06:10:06] [Output] : ★ screw on it down.      ((Marcus Wilburn))
[2020-01-20 06:11:42] [Output] : ★ Marcus Wilburn is seemingly happy with the setup so far, he grabs the oil feed line from the box and
[2020-01-20 06:12:12] [Output] : ★ connects it to the tap he's installed in the oil pan, routing it all the way to the      ((Marcus Wilburn))
[2020-01-20 06:13:01] [Output] : ★ turbo housing afterwards, connecting it in the right slot and using a solid wrench to      ((Marcus Wilburn))
[2020-01-20 06:13:06] [Output] : ★ secure it in place.      ((Marcus Wilburn))
[2020-01-20 06:14:00] [Output] : ★ Marcus Wilburn then proceeds to plug the end of the oil return line to the tap on the oil pan, securing it
[2020-01-20 06:14:27] [Output] : ★ and routing it to the turbo housing as he connects it in the associated slot.      ((Marcus Wilburn))
[2020-01-20 06:14:54] [Output] : ★ Marcus Wilburn secures both ends after applying teflon tape to make sure it wouldn't leak.
[2020-01-20 06:17:08] [Output] : ★ Marcus Wilburn takes the electric drill and fits it with a bit of the right size before drilling into the
[2020-01-20 06:17:12] [Output] : ★ vacuum line.      ((Marcus Wilburn))
[2020-01-20 06:18:05] [Output] : ★ Marcus Wilburn places the drill aside and grabs a T connector as he fits it in the hole's just drilled.
[2020-01-20 06:18:52] [Output] : ★ Marcus Wilburn fishes the blow off valve that came with the kit out the box and connects it to the T
[2020-01-20 06:19:18] [Output] : ★ connection he's just installed, he uses a clamp to tighten it in place.      ((Marcus Wilburn))
[2020-01-20 06:23:44] [Output] : ★ Marcus Wilburn grabs the airbox he's removed earlier and fishes the filter out of it before putting it back
[2020-01-20 06:24:33] [Output] : ★ in place, just rested there for the time being, he moves the cold air filter inside it and      ((Marcus Wilburn))
[2020-01-20 06:27:31] [Output] : ★ emits a sigh as he looks at the engine bay.      ((Marcus Wilburn))
[2020-01-20 06:28:23] [Output] : ★ Marcus Wilburn uses the ratchet to undo the two bolts of the left side of the hood.
[2020-01-20 06:28:42] [Output] : ★ Marcus Wilburn supports the hood with his left hand and undoes the two bolts on the right side, the hood
[2020-01-20 06:29:08] [Output] : ★ prop is making his life easier, when he's done unscrewing the bolts, he quickly tosses      ((Marcus Wilburn))
[2020-01-20 06:29:23] [Output] : ★ the ratchet aside and uses both hands to lift it up with a grunt and move it to the work      ((Marcus Wilburn))
[2020-01-20 06:29:27] [Output] : ★ bench.      ((Marcus Wilburn))
[2020-01-20 06:30:46] [Output] : ★ Marcus Wilburn grabs his torch set and adjusts the gas and oxygen valves, enough of the mixture to spark it
[2020-01-20 06:30:51] [Output] : ★ up.      ((Marcus Wilburn))
[2020-01-20 06:31:43] [Output] : ★ Marcus Wilburn grabs his protective eyewear and puts it on before increasing the gas amount for
[2020-01-20 06:32:26] [Output] : ★ a bigger flame, he cuts a circle big enough for his hood exit plans in the hood.      ((Marcus Wilburn))
[2020-01-20 06:33:07] [Output] : ★ Marcus Wilburn puts out the gas operated torch and places it aside as he gets his angle grinder and uses
[2020-01-20 06:33:25] [Output] : ★ it to smoothen to edges of the circle he's just cut.      ((Marcus Wilburn))
[2020-01-20 06:34:15] [Output] : ★ Marcus Wilburn grunts as he lifts the hood up with all of his might, he moves it back in place and
[2020-01-20 06:34:24] [Output] : ★ lines the holes up with the brackets.      ((Marcus Wilburn))
[2020-01-20 06:35:01] [Output] : ★ Marcus Wilburn supports it with his left hand while using his right one to tighten the bolts in order
[2020-01-20 06:35:10] [Output] : ★ to mount the hood back in place.      ((Marcus Wilburn))
[2020-01-20 06:36:15] [Output] : ★ Marcus Wilburn doesn't take off his protective glasses, he opens another box and takes out a
[2020-01-20 06:37:07] [Output] : ★ 90 degree DIY exhaust pipe, he lines it up with the turbine exhaust outlet while      ((Marcus Wilburn))
[2020-01-20 06:37:29] [Output] : ★ using his left hand to slowly lower the hood to know how much he should cut in order      ((Marcus Wilburn))
[2020-01-20 06:37:46] [Output] : ★ for the pipe to fit through the hood exit hole he's cut.      ((Marcus Wilburn))
[2020-01-20 06:38:09] [Output] : ★ Marcus Wilburn bobs his head and raises the hood back up, applying the prop.
[2020-01-20 06:38:29] [Output] : ★ Marcus Wilburn heads to the workbench and mans the electric saw, he turns the machine on and
[2020-01-20 06:38:51] [Output] : ★ steadily cuts through the pipe to trim it down in order for it to fit his needs.      ((Marcus Wilburn))
[2020-01-20 06:39:21] [Output] : ★ Marcus Wilburn places the saw aside after turning it off, he uses the grinder to smoothen the
[2020-01-20 06:39:36] [Output] : ★ sharp edges produced by the saw.      ((Marcus Wilburn))
[2020-01-20 06:39:57] [Output] : ★ Marcus Wilburn grabs the pipe and test fits it again, seemingly impressed as it meets his needs.
[2020-01-20 06:40:51] [Output] : ★ Marcus Wilburn grabs his TIC welder post closer to the hood and turns the machine on as he adjusts the
[2020-01-20 06:40:58] [Output] : ★ parameters.      ((Marcus Wilburn))
[2020-01-20 06:41:41] [Output] : ★ Marcus Wilburn wears a pair of protective gloves and holds the pipe in place as he carefully
[2020-01-20 06:41:51] [Output] : ★ welds the pipe to the turbine exhaust outlet.      ((Marcus Wilburn))
[2020-01-20 06:42:36] [Output] : ★ Marcus Wilburn ensures he forgets no spots to avoid any possible leaks, he lets go of the pipe once it's in
[2020-01-20 06:42:51] [Output] : ★ place and lowers the hood back and forth to see if there's any clearance issue, apparently      ((Marcus Wilburn))
[2020-01-20 06:42:54] [Output] : ★ none.      ((Marcus Wilburn))
[2020-01-20 06:46:37] [Output] : [STAFF] (1) Junior Moderator Joseph King (elchapo): Wanna see some crazy stuff?
[2020-01-20 06:47:16] [Output] : ★ Marcus Wilburn supports the hood with the prop and grabs the bumper he's removed earlier.
[2020-01-20 06:47:43] [Output] : ★ Marcus Wilburn test fits it and uses a permanent marker to mark where he needs to cut to make enough
[2020-01-20 06:48:03] [Output] : ★ room for his front mount intercooler.      ((Marcus Wilburn))
[2020-01-20 06:48:22] [Output] : ★ Marcus Wilburn takes the bumper to the workbench and turns on the electric saw as he carefully
[2020-01-20 06:48:40] [Output] : ★ cuts through the marked lines to removed the excess material from the bumper.      ((Marcus Wilburn))
[2020-01-20 06:49:12] [Output] : ★ Marcus Wilburn grabs the final product after smoothing the edges with an angle grinder for a hotter look.
[2020-01-20 06:49:44] [Output] : ★ Marcus Wilburn fits the bumper back on and cops a screwdriver as he starts screwing it back
[2020-01-20 06:50:15] [Output] : ★ in place, giving it a gentle pull to see if it's any loose.      ((Marcus Wilburn))
[2020-01-20 06:50:43] [Output] : ★ Marcus Wilburn puts the screwdriver aside and grabs the top of the radiator before lifting it up and
[2020-01-20 06:50:51] [Output] : ★ carefully dropping it back in place.      ((Marcus Wilburn))
[2020-01-20 06:51:16] [Output] : ★ Marcus Wilburn hand fits the radiator hoses back on and uses the screwdriver to screw in the clamps
[2020-01-20 06:51:22] [Output] : ★ in order to tighten them.      ((Marcus Wilburn))
[2020-01-20 06:51:48] [Output] : ★ Marcus Wilburn reconnects the wire harness to the radiator fan and yawns as he checks out the
[2020-01-20 06:51:54] [Output] : ★ progress he's made so far.      ((Marcus Wilburn))
[2020-01-20 07:06:08] [Output] : ★ Marcus Wilburn heads to the back of the car and pops the trunk open before removing the carpet
[2020-01-20 07:06:43] [Output] : ★ covering the cover to the fuel pump assembly.      ((Marcus Wilburn))
[2020-01-20 07:07:18] [Output] : ★ Marcus Wilburn places a bunch of dry towels around the the cover and undoes the bolts prior to fishing
[2020-01-20 07:08:04] [Output] : ★ a flat head screwdriver out of his pocket and using it to undo the harness to the      ((Marcus Wilburn))
[2020-01-20 07:08:10] [Output] : ★ fuel pump assembly.      ((Marcus Wilburn))
[2020-01-20 07:08:36] [Output] : ★ Marcus Wilburn then proceeds to unscrew the lid to reveal the pump itself, he unplugs the electric
[2020-01-20 07:08:52] [Output] : ★ connections and takes it out before throwing it to the side.      ((Marcus Wilburn))
[2020-01-20 07:09:13] [Output] : ★ Marcus Wilburn opens the carton box and takes out a brand new high flow fuel pump, dropping it
[2020-01-20 07:09:22] [Output] : ★ inside the pump assembly and reconnecting the wires.      ((Marcus Wilburn))
[2020-01-20 07:09:42] [Output] : ★ Marcus Wilburn places the lid back on and uses the screwdriver to fix it in place.
[2020-01-20 07:10:05] [Output] : ★ Marcus Wilburn drops the fuel pump assembly back inside the fuel tank through the hole and reconnects the
[2020-01-20 07:10:14] [Output] : ★ wire harness.      ((Marcus Wilburn))
[2020-01-20 07:10:41] [Output] : ★ Marcus Wilburn puts the cover back and tightens the bolts using his ratchet and the right size socket.
[2020-01-20 09:11:32] [Output] : ★ Marcus Wilburn fits his ratcheting wrench with a 10mm socket and undoes the three nuts that secure the
[2020-01-20 09:11:45] [Output] : ★ fuel rail in place.      ((Marcus Wilburn))
[2020-01-20 09:12:27] [Output] : ★ Marcus Wilburn grabs an dry towel and places it beneath the engine before taking an adjustable
[2020-01-20 09:12:55] [Output] : ★ wrench and slowly loosening the nut securing the end of the fuel feed line to the      ((Marcus Wilburn))
[2020-01-20 09:13:36] [Output] : ★ fuel rail, he eases the fuel pressure out the system as the fuel drips down on the      ((Marcus Wilburn))
[2020-01-20 09:13:43] [Output] : ★ dry towel he placed.      ((Marcus Wilburn))
[2020-01-20 09:14:06] [Output] : ★ Marcus Wilburn completely removes the said nut and the washer with it, placing them aside for later
[2020-01-20 09:14:08] [Output] : ★ use.      ((Marcus Wilburn))
[2020-01-20 09:14:41] [Output] : ★ Marcus Wilburn proceeds to do the same with the fuel return hose on the fuel rack, he loosens then ut
[2020-01-20 09:14:46] [Output] : ★ the nut*      ((Marcus Wilburn))
[2020-01-20 09:15:03] [Output] : ★ and saves it along with the washer for later installation.      ((Marcus Wilburn))
[2020-01-20 09:17:18] [Output] : ★ Marcus Wilburn eases the fuel rail out of place as he does so extremely slowly trying not to loose
[2020-01-20 09:17:52] [Output] : ★ the rubber seals of the injectors inside.      ((Marcus Wilburn))
[2020-01-20 09:20:39] [Output] : ★ Marcus Wilburn unplugs the wire harness to each injector before taking the fuel rail to the workbench and
[2020-01-20 09:24:02] [Output] : ★ placing a cloth beneath the rail as he places it down on the bench.      ((Marcus Wilburn))
[2020-01-20 09:24:35] [Output] : ★ Marcus Wilburn starts wiggling the OEM injectors out of place and removing them from the fuel
[2020-01-20 09:25:12] [Output] : ★ rail before getting a glass container that has the new high flow injectors soaking in      ((Marcus Wilburn))
[2020-01-20 09:25:17] [Output] : ★ gasoline in it.      ((Marcus Wilburn))
[2020-01-20 09:25:50] [Output] : ★ Marcus Wilburn takes out the new injectors and applies the rubber seals to the tip before fitting them in
[2020-01-20 09:26:09] [Output] : ★ the holes from the fuel rail and applying some pressure until they stop.      ((Marcus Wilburn))
[2020-01-20 09:26:38] [Output] : ★ Marcus Wilburn grabs the fuel rail with the new injectors installed on it, he eases it back in place with
[2020-01-20 09:27:00] [Output] : ★ the new injectors inside the holes on the intake manifold, he watches for the sprayer      ((Marcus Wilburn))
[2020-01-20 09:27:17] [Output] : ★ tips while doing so as they tend to be squishy.      ((Marcus Wilburn))
[2020-01-20 09:27:41] [Output] : ★ Marcus Wilburn hands tightening the three nuts that secure the fuel rail in place and grabs the ratchet
[2020-01-20 09:28:29] [Output] : ★ with the 10mm socket on it, he starts tightening the said nuts until they're snug.      ((Marcus Wilburn))
[2020-01-20 09:29:03] [Output] : ★ Marcus Wilburn grabs the nut and washer from the fuel return line and fits it back on the return port
[2020-01-20 09:29:28] [Output] : ★ from the fuel rack, using the adjustable wrench to fasten the nut until the hose is      ((Marcus Wilburn))
[2020-01-20 09:29:34] [Output] : ★ firmly secured to the rail.      ((Marcus Wilburn))
[2020-01-20 09:29:55] [Output] : ★ Marcus Wilburn grabs the fuel feed line and plugs it to the fuel rail, using the nut and washer from
[2020-01-20 09:30:22] [Output] : ★ earlier to secure them as he tightens them with the 10mm socket fitted on his ratchet.      ((Marcus Wilburn))
[2020-01-20 09:34:04] [Output] : ★ Marcus Wilburn reconnects the wire harnesses to the new injectors as he makes sure they're all
[2020-01-20 09:34:17] [Output] : ★ plugged in properly, slightly shaking them to make sure.      ((Marcus Wilburn))
[2020-01-20 10:00:18] [Output] : ★ Marcus Wilburn grabs a bottle of the usual engine oil and takes off the engine's oil cap before inserting
[2020-01-20 10:00:29] [Output] : ★ a funnel in the hole and pouring the fresh oil inside.      ((Marcus Wilburn))
[2020-01-20 10:04:07] [Output] : ★ Marcus Wilburn pulls the oil gauge to see if he needs to pour more oil in before inserting the gauge back
[2020-01-20 10:04:22] [Output] : ★ in and putting the oil cap back on.      ((Marcus Wilburn))
[2020-01-20 10:04:58] [Output] : ★ Marcus Wilburn puts the engine oil bottle aside and shuts the hood.
[2020-01-20 10:21:27] [Output] : ★ Marcus Wilburn opens the driver door and leans inside the Honda as he disengages the parking brake.
[2020-01-20 10:21:47] [Output] : ★ Marcus Wilburn jumps out of the car and lays his palms on the trunk before starting to push the Civic
[2020-01-20 10:22:12] [Output] : ★ in order to get the front wheels between the dyno's rollers.      ((Marcus Wilburn))
[2020-01-20 10:22:40] [Output] : ★ Marcus Wilburn grabs the mouse and starts up the dyno software before pressing on the lift menu
[2020-01-20 10:22:55] [Output] : ★ and selecting the "lower" option in order to lower the front wheels and get them between the      ((Marcus Wilburn))
[2020-01-20 10:23:01] [Output] : ★ rollers.      ((Marcus Wilburn))
[2020-01-20 10:23:46] [Output] : ★ Marcus Wilburn grabs the hook of the left axle strap before wrapping it around the rear left axle and securing
[2020-01-20 10:24:01] [Input]  : do it in place before tightening it as much as he could.
[2020-01-20 10:24:01] [Output] : ★ it in place before tightening it as much as he could.      ((Marcus Wilburn))
[2020-01-20 10:24:13] [Input]  : me grabs the right axle strap and hooks it around the right rear axle before securing it
[2020-01-20 10:24:13] [Output] : ★ Marcus Wilburn grabs the right axle strap and hooks it around the right rear axle before securing it
[2020-01-20 10:24:29] [Input]  : do to the mechanism in order to tighten it and lock it in place.
[2020-01-20 10:24:29] [Output] : ★ to the mechanism in order to tighten it and lock it in place.      ((Marcus Wilburn))
[2020-01-20 10:24:48] [Input]  : me opens the driver door and pulls the hood release handle.
[2020-01-20 10:24:48] [Output] : ★ Marcus Wilburn opens the driver door and pulls the hood release handle.
[2020-01-20 10:25:05] [Input]  : me slides his fingers under the hood and lifts it up before applying the hood prop.
[2020-01-20 10:25:05] [Output] : ★ Marcus Wilburn slides his fingers under the hood and lifts it up before applying the hood prop.
[2020-01-20 10:25:28] [Output] : ★ Marcus Wilburn grabs ahold of the inductive RPM pickup sensor and locks it around the spark plug wire.
[2020-01-20 10:26:29] [Output] : ★ Marcus Wilburn hops inside the car and uses the tip of a flat head screwdriver to pry off the carpet
[2020-01-20 10:26:45] [Output] : ★ beneath the glove box, revealing the OEM ECU.      ((Marcus Wilburn))
[2020-01-20 10:27:10] [Output] : ★ Marcus Wilburn uses the same screwdriver to undo the screws, he then unplugs the harnesses and
[2020-01-20 10:27:24] [Output] : ★ slides the old ECU out of place as he recklessly tosses it out the window.      ((Marcus Wilburn))
[2020-01-20 10:27:42] [Output] : ★ Marcus Wilburn grabs the new performance ECU and puts it in place as he secures it using the screws
[2020-01-20 10:27:51] [Output] : ★ prior to reconnecting the harnesses.      ((Marcus Wilburn))
[2020-01-20 10:28:19] [Output] : ★ Marcus Wilburn grabs the laptop and gets in the driver seat as he places it on his lap.
[2020-01-20 10:28:32] [Output] : ★ Marcus Wilburn unfolds the laptop and presses on the start up button to start it.
[2020-01-20 10:28:51] [Output] : ★ Marcus Wilburn opens the dyno software along with the AEMTuner software as he grabs an OBD2 to USB
[2020-01-20 10:31:19] [Output] : ★ cable, plugging the OBD2 end into the OBD2 port under the driver side of the dashboard and      ((Marcus Wilburn))
[2020-01-20 10:31:34] [Output] : ★ the USB to the laptop.      ((Marcus Wilburn))
[2020-01-20 10:31:49] [Output] : ★ Marcus Wilburn presses on the drop down menu reading "File" and presses on "Connect to car."
[2020-01-20 10:32:11] [Output] : ★ The AEMTuner software would detect the Honda's ECU and establish connection.      ((Marcus Wilburn))
[2020-01-20 10:32:25] [Output] : ★ Marcus Wilburn presses on the "File" drop down menu and selects "Open calibration" before browsing to
[2020-01-20 10:32:51] [Output] : ★ the Honda's calibrations folder and opening the Civic's file.      ((Marcus Wilburn))
[2020-01-20 10:33:11] [Output] : ★ Marcus Wilburn clicks on the "Ignition" map with a spark plug icon before pressing on shift and selecting
[2020-01-20 10:33:52] [Output] : ★ all the cases starting from 500RPM to 6000RPM as he then right clicks and presses on      ((Marcus Wilburn))
[2020-01-20 10:34:09] [Output] : ★ "Add value" and adding a negative value to decrease ignition timing values in order to      ((Marcus Wilburn))
[2020-01-20 10:34:15] [Output] : ★ avoid knock.      ((Marcus Wilburn))
[2020-01-20 10:34:48] [Output] : ★ Marcus Wilburn presses on the fuel map with a fuel injector icon prior to selecting all the cases and
[2020-01-20 10:35:02] [Output] : ★ choosing the "Add value" option in order to increase the amount of fuel injected into      ((Marcus Wilburn))
[2020-01-20 10:35:07] [Output] : ★ the cylinders.      ((Marcus Wilburn))
[2020-01-20 10:35:29] [Output] : ★ Marcus Wilburn would click on the "Boost" map with a turbocharger icon, selecting all the cases
[2020-01-20 10:36:19] [Output] : ★ as he right clicks chooses add value to increase the boost pressure values.      ((Marcus Wilburn))
[2020-01-20 10:36:38] [Output] : ★ Marcus Wilburn puts the key in the ignition and turns it clockwise as he awaits to hear the fuel pump
[2020-01-20 10:36:45] [Output] : ★ engage before trying to start the car up.      ((Marcus Wilburn))
[2020-01-20 10:36:59] [Output] : ((OOC Luck)) Marcus Wilburn tries their luck from 1 to 100 and gets 32.
[2020-01-20 10:37:02] [Output] : ((OOC Chance at 32%)) Marcus Wilburn's attempt has failed.
[2020-01-20 10:37:18] [Output] : ★ Marcus Wilburn takes the key out of the ignition and reinserts it, turning to the ON position and awaiting
[2020-01-20 10:37:41] [Output] : ★ for the fuel pump to establish a steady flow within the dry lines of the fuel rail.      ((Marcus Wilburn))
[2020-01-20 10:38:06] [Output] : ★ Marcus Wilburn starts the engine as he smirks.
[2020-01-20 10:38:22] [Output] : ★ Marcus Wilburn alt tabs to the dyno software and clicks on the file menu before choosing new run.
[2020-01-20 10:38:46] [Output] : ★ Marcus Wilburn floors the gas pedal and keeps his eyes on the gauges displayed on the laptop's screen
[2020-01-20 10:39:01] [Output] : ★ in order to monitor all the data logged from the ECU.      ((Marcus Wilburn))
[2020-01-20 10:39:32] [Output] : ★ Marcus Wilburn lets go of the accelerator pedal and awaits for the car to idle before turning the engine
[2020-01-20 10:39:56] [Output] : ★ off and going through the results as he bobs his head, clearly interested in the results.      ((Marcus Wilburn))
[2020-01-20 10:40:38] [Output] : ★ Marcus Wilburn alt tabs back in the AEMTuner application and tweaks the values a bit as he goes for a
[2020-01-20 10:41:01] [Output] : ★ second run to improve the results, he flashes the map to the ECU and turns off the      ((Marcus Wilburn))
[2020-01-20 10:41:21] [Output] : ★ laptop, he starts undoing the straps tying the vehicle down with a rather proud      ((Marcus Wilburn))
[2020-01-20 10:41:25] [Output] : ★ smile on his face.      ((Marcus Wilburn))
[2020-01-20 10:41:40] [Output] : ★ Marcus Wilburn gets the car out of the garage and takes it out for a spin, he breaks in the new
[2020-01-20 10:41:52] [Output] : ★ turbo, not pushing to the limits just yet.      ((Marcus Wilburn))
[2020-01-20 10:44:05] [Output] : ★ Marcus Wilburn randomly pulls over and hops out as he pops open the trunk.
[2020-01-20 10:44:27] [Output] : ★ Marcus Wilburn grabs the spare tire and recklessly tosses it on the side of the road as he cackles.
[2020-01-20 10:44:32] [Output] :  [English] Marcus Wilburn says: Weight reduction nigga.