API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 12th, 2019
139
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.04 KB | None | 0 0
raw download clone embed print report
  1. log.smart 100% 9858 26.1KB/s 00:00
  2. abdallah@poupon-la-peste:~/conneries$ cat log.smart
  3. smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-54-generic] (local build)
  4. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  5.  
  6. === START OF INFORMATION SECTION ===
  7. Model Family: Toshiba 2.5" HDD MK..65GSX
  8. Device Model: TOSHIBA MK3265GSX
  9. Serial Number: 90BIP4CNT
  10. LU WWN Device Id: 5 000039 2c2a02756
  11. Firmware Version: GJ002F
  12. User Capacity: 320 072 933 376 bytes [320 GB]
  13. Sector Size: 512 bytes logical/physical
  14. Rotation Rate: 5400 rpm
  15. Form Factor: 2.5 inches
  16. Device is: In smartctl database [for details use: -P show]
  17. ATA Version is: ATA8-ACS (minor revision not indicated)
  18. SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
  19. Local Time is: Fri Jul 12 17:25:26 2019 CEST
  20. SMART support is: Available - device has SMART capability.
  21. SMART support is: Enabled
  22.  
  23. === START OF READ SMART DATA SECTION ===
  24. SMART overall-health self-assessment test result: PASSED
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 120) seconds.
  35. Offline data collection
  36. capabilities: (0x5b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. No Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 2) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 99) minutes.
  53. SCT capabilities: (0x003d) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 16
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000b 100 099 050 Pre-fail Always - 0
  62. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  63. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1146
  64. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1415
  65. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 155
  66. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  67. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  68. 9 Power_On_Hours 0x0032 028 028 000 Old_age Always - 28878
  69. 10 Spin_Retry_Count 0x0033 127 100 030 Pre-fail Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1413
  71. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 937
  72. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 235
  73. 193 Load_Cycle_Count 0x0032 081 081 000 Old_age Always - 196430
  74. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 46 (Min/Max 14/53)
  75. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 122
  76. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 48
  77. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  78. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 3
  79. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 60
  80. 222 Loaded_Hours 0x0032 038 038 000 Old_age Always - 24889
  81. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  82. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  83. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 309
  84. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  85.  
  86. SMART Error Log Version: 1
  87. ATA Error Count: 1890 (device log contains only the most recent five errors)
  88. CR = Command Register [HEX]
  89. FR = Features Register [HEX]
  90. SC = Sector Count Register [HEX]
  91. SN = Sector Number Register [HEX]
  92. CL = Cylinder Low Register [HEX]
  93. CH = Cylinder High Register [HEX]
  94. DH = Device/Head Register [HEX]
  95. DC = Device Command Register [HEX]
  96. ER = Error register [HEX]
  97. ST = Status register [HEX]
  98. Powered_Up_Time is measured from power on, and printed as
  99. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  100. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  101.  
  102. Error 1890 occurred at disk power-on lifetime: 28807 hours (1200 days + 7 hours)
  103. When the command that caused the error occurred, the device was active or idle.
  104.  
  105. After command completion occurred, registers were:
  106. ER ST SC SN CL CH DH
  107. -- -- -- -- -- -- --
  108. 40 51 12 c6 0a a4 e4 Error: UNC 18 sectors at LBA = 0x04a40ac6 = 77859526
  109.  
  110. Commands leading to the command that caused the error were:
  111. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  112. -- -- -- -- -- -- -- -- ---------------- --------------------
  113. 25 00 20 b8 0a a4 e0 00 27d+22:22:50.276 READ DMA EXT
  114. 25 00 20 40 80 75 e0 00 27d+22:22:50.271 READ DMA EXT
  115. 25 00 20 08 3d 7b e0 00 27d+22:22:50.256 READ DMA EXT
  116. 25 00 20 a0 12 76 e0 00 27d+22:22:50.241 READ DMA EXT
  117. 25 00 20 f0 df c3 e0 00 27d+22:22:50.230 READ DMA EXT
  118.  
  119. Error 1889 occurred at disk power-on lifetime: 28772 hours (1198 days + 20 hours)
  120. When the command that caused the error occurred, the device was active or idle.
  121.  
  122. After command completion occurred, registers were:
  123. ER ST SC SN CL CH DH
  124. -- -- -- -- -- -- --
  125. 40 51 34 ac 9e bb e7 Error: UNC 52 sectors at LBA = 0x07bb9eac = 129736364
  126.  
  127. Commands leading to the command that caused the error were:
  128. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  129. -- -- -- -- -- -- -- -- ---------------- --------------------
  130. c8 00 40 a0 9e bb e7 00 26d+10:42:43.435 READ DMA
  131. c8 00 30 00 12 54 e8 00 26d+10:42:43.435 READ DMA
  132. c8 00 00 28 49 ba e9 00 26d+10:42:43.301 READ DMA
  133. c8 00 00 30 12 54 e8 00 26d+10:42:43.290 READ DMA
  134. c8 00 d8 58 26 d6 ea 00 26d+10:42:42.625 READ DMA
  135.  
  136. Error 1888 occurred at disk power-on lifetime: 28732 hours (1197 days + 4 hours)
  137. When the command that caused the error occurred, the device was active or idle.
  138.  
  139. After command completion occurred, registers were:
  140. ER ST SC SN CL CH DH
  141. -- -- -- -- -- -- --
  142. 40 51 12 c6 0a a4 e4 Error: UNC 18 sectors at LBA = 0x04a40ac6 = 77859526
  143.  
  144. Commands leading to the command that caused the error were:
  145. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  146. -- -- -- -- -- -- -- -- ---------------- --------------------
  147. 25 00 20 b8 0a a4 e0 00 24d+18:46:18.421 READ DMA EXT
  148. 25 00 20 40 80 75 e0 00 24d+18:46:18.416 READ DMA EXT
  149. 25 00 20 08 3d 7b e0 00 24d+18:46:18.402 READ DMA EXT
  150. 25 00 20 a0 12 76 e0 00 24d+18:46:18.386 READ DMA EXT
  151. 25 00 20 f0 df c3 e0 00 24d+18:46:18.374 READ DMA EXT
  152.  
  153. Error 1887 occurred at disk power-on lifetime: 28730 hours (1197 days + 2 hours)
  154. When the command that caused the error occurred, the device was active or idle.
  155.  
  156. After command completion occurred, registers were:
  157. ER ST SC SN CL CH DH
  158. -- -- -- -- -- -- --
  159. 40 51 3d 03 e3 8e e0 Error: UNC 61 sectors at LBA = 0x008ee303 = 9364227
  160.  
  161. Commands leading to the command that caused the error were:
  162. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  163. -- -- -- -- -- -- -- -- ---------------- --------------------
  164. 25 00 40 00 e3 8e e0 00 24d+17:01:54.072 READ DMA EXT
  165. 25 00 40 c0 e2 8e e0 00 24d+17:01:54.071 READ DMA EXT
  166. 25 00 40 80 e2 8e e0 00 24d+17:01:54.071 READ DMA EXT
  167. 25 00 40 40 e2 8e e0 00 24d+17:01:54.070 READ DMA EXT
  168. 25 00 40 00 e2 8e e0 00 24d+17:01:54.070 READ DMA EXT
  169.  
  170. Error 1886 occurred at disk power-on lifetime: 28711 hours (1196 days + 7 hours)
  171. When the command that caused the error occurred, the device was active or idle.
  172.  
  173. After command completion occurred, registers were:
  174. ER ST SC SN CL CH DH
  175. -- -- -- -- -- -- --
  176. 40 51 e4 1c c9 32 e8 Error: UNC 228 sectors at LBA = 0x0832c91c = 137546012
  177.  
  178. Commands leading to the command that caused the error were:
  179. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  180. -- -- -- -- -- -- -- -- ---------------- --------------------
  181. c8 00 00 00 c9 32 e8 00 23d+21:40:48.375 READ DMA
  182. 25 00 00 00 0c ba e0 00 23d+21:40:46.485 READ DMA EXT
  183. 25 00 00 00 0b ba e0 00 23d+21:40:44.472 READ DMA EXT
  184. 25 00 00 00 0a ba e0 00 23d+21:40:43.948 READ DMA EXT
  185. 25 00 00 00 09 ba e0 00 23d+21:40:43.880 READ DMA EXT
  186.  
  187. SMART Self-test log structure revision number 1
  188. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  189.  
  190. SMART Selective self-test log data structure revision number 1
  191. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  192. 1 0 0 Not_testing
  193. 2 0 0 Not_testing
  194. 3 0 0 Not_testing
  195. 4 0 0 Not_testing
  196. 5 0 0 Not_testing
  197. Selective self-test flags (0x0):
  198. After scanning selected spans, do NOT read-scan remainder of disk.
  199. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!