[2019-08-19 13:22:32] [Output] : ★ George Remington unpockets the keys and pushes down the top buton unlocking the car
[2019-08-19 13:22:48] [Output] : ★ George Remington heads towards the trunk after in order to pick up the nedeed parts
[2019-08-19 13:23:13] [Output] : ★ George Remington pulls up the handle and lifts the trunk up,taking out the box with parts
[2019-08-19 13:23:36] [Output] : ★ George Remington puts the box down at the front of the car and opens it up,looking over the parts
[2019-08-19 13:25:18] [Output] : ★ You'd be able to see the two new turbines,a new diverter valve,the upgraded ecu and..      ((George Remington))
[2019-08-19 13:25:22] [Output] : ★ ...the new air filters      ((George Remington))
[2019-08-19 13:25:35] [Output] : ★ George Remington heads to the driver's door and pulls up the handle opening the door
[2019-08-19 13:25:57] [Output] : ★ George Remington locates the hood release and pulls up the handle,opening the hood.
[2019-08-19 13:26:18] [Output] : ★ George Remington heads to the hood after as it pops open
[2019-08-19 13:26:39] [Output] : ★ George Remington slides both hands under the hood and hits the release trigger,opening the mechanismum
[2019-08-19 13:26:50] [Output] : ★ George Remington then lifts the hood up,leting it sit on the hydraulic arms
[2019-08-19 13:27:19] [Output] : ★ You'd be able to see both turbos on each side of the engine as well as the air filters and..      ((George Remington))
[2019-08-19 13:27:31] [Output] : ★ ...the diverter valve siting on the right side of the intercooler      ((George Remington))
[2019-08-19 13:27:53] [Output] : ★ George Remington walks to the tool drawer in order to pick up the impact gun and a pair of pliers
[2019-08-19 13:28:02] [Output] : ★ George Remington further returns to the engine in order to proceed
[2019-08-19 13:28:17] [Output] : ★ George Remington puts the impact gun on the radiator support and keeps the pliers in his hands
[2019-08-19 13:28:37] [Output] : ★ George Remington then reaches for the four clamps of the left side air filter and removes them each,setting..
[2019-08-19 13:28:43] [Output] : ★ ...them aside along with the top cap      ((George Remington))
[2019-08-19 13:29:12] [Output] : ★ George Remington then reaches the old air filter with his free hand and takes it out,throwing it away
[2019-08-19 13:29:26] [Output] : ★ George Remington leans over to the box and picks up one of the air filter,placing it back
[2019-08-19 13:29:48] [Output] : ★ George Remington then places back the new air filter,covering it with the top cap
[2019-08-19 13:30:01] [Output] : ★ George Remington finally puts back the four clamps,pushing them to lock the cover
[2019-08-19 13:30:12] [Output] : ★ George Remington then takes a step back and leans over to the box picking up the second filter
[2019-08-19 13:30:23] [Output] : ★ George Remington then proceeds to the right side of the car and sets the filter aside
[2019-08-19 13:30:45] [Output] : ★ George Remington uses the pliers to remove the four clamps,taking them out along with the top cover
[2019-08-19 13:31:02] [Output] : ★ George Remington then grabs the old air filter from the side and lifts it up,throwing it away
[2019-08-19 13:31:17] [Output] : ★ George Remington finally places back the top cover and pushes the clamps back in,locking them straight away
[2019-08-19 13:32:17] [Output] : ★ George Remington keeps the pliers in his right hand as he bends over the radiator support,reaching the...
[2019-08-19 13:32:20] [Output] : ★ ...diverter valve      ((George Remington))
[2019-08-19 13:32:35] [Output] : ★ George Remington locates the valve along with the pipe attached to it and proceeds to remove it
[2019-08-19 13:33:15] [Output] : ★ There'd be two clamps holding the Y pipe to the main one      ((George Remington))
[2019-08-19 13:33:35] [Output] : ★ George Remington reaches for the ends of the Y pipe and grabs the clamps in the pliers,removing them both
[2019-08-19 13:33:49] [Output] : ★ George Remington then twists the pipe a little,managing to dettach the pipe from the main one
[2019-08-19 13:34:13] [Output] : ★ George Remington stands up in a vertical position and then slowly sits down,placing the old valve aside
[2019-08-19 13:34:34] [Output] : ★ In the package,the new diverter valve would come with it's own forged pipe      ((George Remington))
[2019-08-19 13:34:50] [Output] : ★ George Remington grabs the new valve along with it's pipe and bends over into the engine bay again
[2019-08-19 13:35:36] [Output] : ★ George Remington attaches the Y pipe of the valve to the main one and finally uses the pliers to attach the..
[2019-08-19 13:35:42] [Output] : ★ ...clamps back to the ends of it      ((George Remington))
[2019-08-19 13:36:23] [Output] : ★ George Remington stands up in a vertical position and looks over the two turbos
[2019-08-19 13:36:51] [Output] : ★ You'd be able to see that they each have a clamp holding the intake pipe of the turbine to..      ((George Remington))
[2019-08-19 13:37:42] [Output] : ★ ...it and four bolts connecting each to the exhaust manifold      ((George Remington))
[2019-08-19 13:38:02] [Output] : ★ George Remington reaches for the left turbine and removes the clamp using the pliers,then...
[2019-08-19 13:38:20] [Output] : ★ ...moving to the right one      ((George Remington))
[2019-08-19 13:38:40] [Output] : ★ George Remington also uses his pliers to remove the right turbine's pipe clamp and sets the clamp aside
[2019-08-19 13:38:58] [Output] : ★ George Remington picks up the impact gun from the radiator support and reaches for the bottom side of the...
[2019-08-19 13:39:01] [Output] : ★ ...right turbine      ((George Remington))
[2019-08-19 13:39:18] [Output] : ★ George Remington starts up the impact gun and uses it to remove the four bolts,pocketing them
[2019-08-19 13:39:48] [Output] : ★ George Remington grabs the turbine from both sides and lifts it up,setting it aside on the ground
[2019-08-19 13:40:52] [Output] : ★ George Remington then leans over to the box and picks up the new right side turbine,moving to it's place
[2019-08-19 13:41:22] [Output] : ★ George Remington alligns the new turbine on the exhaust manifold and picks up the bolts again,placing them ba
[2019-08-19 13:41:26] [Output] : ★ ...back      ((George Remington))
[2019-08-19 13:41:40] [Output] : ★ George Remington then starts up the impact gun and fully tightens down the four bolts in a cross
[2019-08-19 13:41:52] [Output] : ★ George Remington sets the impact gun aside and grabs the intake pipe,attaching it to the turbine
[2019-08-19 13:42:07] [Output] : ★ George Remington then grabs the pliers and moves the clamp back,securing the pipe on the turbine housing
[2019-08-19 13:42:22] [Output] : ★ George Remington places the pliers back and takes the impact gun,moving to the left side turbo
[2019-08-19 13:45:35] [Output] : ★ George Remington bends over the engine bay and starts up the impact gun,removing the four bolts holding...
[2019-08-19 13:45:41] [Output] : ★ ...the turbine to the exhaust manifold      ((George Remington))
[2019-08-19 13:45:53] [Output] : ★ George Remington then pockets up the bolts and grabs the turbine from the sides,lifting it up
[2019-08-19 13:46:15] [Output] : ★ George Remington places the old turbine away on the ground and reaches for the box,taking the second...
[2019-08-19 13:46:18] [Output] : ★ ...one out of the pack      ((George Remington))
[2019-08-19 13:46:49] [Output] : ★ George Remington returns back into the engine bay and places the new turbine in it's place,aligning it..
[2019-08-19 13:46:53] [Output] : ★ ...over the exhaust manifold      ((George Remington))
[2019-08-19 13:47:09] [Output] : ★ George Remington unpockets the bolts and attaches them back,using the impact gun to tighten them down
[2019-08-19 13:47:29] [Output] : ★ George Remington then sets the impact gun aside and grabs the intake pipe,attaching it back to the turbine...
[2019-08-19 13:47:31] [Output] : ★ ...housing      ((George Remington))
[2019-08-19 13:47:48] [Output] : ★ George Remington picks up the pliers and uses it to move back the clamp,attaching it back to the turbine
[2019-08-19 13:48:01] [Output] : ★ George Remington then grabs both tools and grabs the top of the hood,shuting it down
[2019-08-19 13:49:46] [Output] : ★ George Remington places the pliers back into the tool drawer and then reaches for the box
[2019-08-19 13:50:12] [Output] : ★ George Remington picks up the new ecu from the box and moves to the right door,holding the impact gun and ecu
[2019-08-19 13:50:34] [Output] : ★ George Remington pulls the handle and opens the door,steping inside the car
[2019-08-19 13:50:42] [Output] : * George Remington adjusts the radio volume. *
[2019-08-19 13:50:57] [Output] : ★ George Remington removes the floor mat from under his feet and drags it to the back
[2019-08-19 13:51:18] [Output] : ★ As the carpet is removed,the ecu box cover would be exposed,having four bolts      ((George Remington))
[2019-08-19 13:51:36] [Output] : ★ George Remington sets the new ecu aside on the arm rest and reaches for the four bolts with the impact gun
[2019-08-19 13:51:59] [Output] : ★ George Remington starts up the impact gun and untightens all four bolts,lifting up the cover and placing it..
[2019-08-19 13:52:05] [Output] : ★ ...on the driver's seat      ((George Remington))
[2019-08-19 13:52:13] [Output] : ★ George Remington then returns to the ecu in order to dettach it
[2019-08-19 13:52:27] [Output] : ★ There'd be two wires powering the ECU and four bolts holding it      ((George Remington))
[2019-08-19 13:52:42] [Output] : ★ George Remington unplugs the two wires and sets them aside,further proceeding to remove the four bolts
[2019-08-19 13:52:59] [Output] : ★ George Remington grabs the ecu box from the sides after and rotates to the back seat,placing it there
[2019-08-19 13:53:16] [Output] : ★ George Remington then returns and reaches for the new ECU box,going down to place it
[2019-08-19 13:53:37] [Output] : ★ George Remington alligns the new computer and places the four bolts back,following to tighten them back with.
[2019-08-19 13:53:43] [Output] : ★ ...the impact gun in a cross      ((George Remington))
[2019-08-19 13:53:55] [Output] : ★ George Remington then plugs the wires back and moves forwards to the next step
[2019-08-19 13:54:10] [Output] : ★ George Remington reaches for the ECU metal cover and takes it,bringing it back in place
[2019-08-19 13:54:22] [Output] : ★ George Remington alligns the cover back and attaches the four bolts to their holes
[2019-08-19 13:54:40] [Output] : ★ George Remington finally tightens down the four bolts in a cross pattern and brings the floor mat back over
[2019-08-19 13:54:42] [Output] : ★ ...it      ((George Remington))
[2019-08-19 13:59:40] [Output] : ★ George Remington twists himself again to the back seat,spotting the tracker and the alarm unit
[2019-08-19 13:59:43] [Output] :  [English] George Remington ((In Car)) says: Oh right.
[2019-08-19 13:59:58] [Output] : ★ George Remington places the both on the arm rest as he steps out of the car
[2019-08-19 14:00:38] [Output] : ★ George Remington  heads to the tool desk in order to pick up a set of pliers,two rubber covers and the ...
[2019-08-19 14:00:40] [Output] : ★ ...heatgun      ((George Remington))
[2019-08-19 14:00:59] [Output] : ★ George Remington takes the tools in his hands and returns to the right passenger seat to install the two...
[2019-08-19 14:01:04] [Output] : ★ ...security units      ((George Remington))
[2019-08-19 14:01:22] [Output] : ★ George Remington steps inside the car and stores the tools on the driver's seat
[2019-08-19 14:01:39] [Output] : ★ George Remington then opens up the glovebox and pushes the two quick release clamps on the sides..
[2019-08-19 14:01:45] [Output] : ★ ...sliding the glovebox out      ((George Remington))
[2019-08-19 14:01:59] [Output] : ★ George Remington places it down at his feet,looking behind it
[2019-08-19 14:02:32] [Output] : ★ There'd be a red cable powering the central locking unit that drives power to the fuses      ((George Remington))
[2019-08-19 14:02:50] [Output] : ★ George Remington grabs the pliers and makes a small cut in the wire,placing the pliers back
[2019-08-19 14:03:36] [Output] : ★ George Remington then picks up the tracker unit and splits the wires,attaching them each to one end of the...
[2019-08-19 14:03:39] [Output] : ★ ...cut,red wire      ((George Remington))
[2019-08-19 14:04:06] [Output] : ★ As the tracker unit is now powered by current,it would light up the red blip      ((George Remington))
[2019-08-19 14:04:21] [Output] : ★ George Remington takes the rubber covers and wraps them around the exposed wires,covering them
[2019-08-19 14:05:20] [Output] : ★ George Remington then takes the heatgun and starts it,heating the two rubber covers to stretch them
[2019-08-19 14:05:33] [Output] : ★ George Remington places the heatgun back on the seat and reaches for the glovebox
[2019-08-19 14:05:50] [Output] : ★ George Remington grabs the glovebox from the sides and slides it back into the hole,covering the wires
[2019-08-19 14:06:09] [Output] : ★ George Remington then opens up the door and steps out of the car leaving it opened
[2019-08-19 14:06:30] [Output] : ★ George Remington spots the fuse box on the side of the dash and removes the cover,placing it on the seat
[2019-08-19 14:07:13] [Output] : ★ George Remington goes inside the car and picks up the alarm unit,going back to the fuses
[2019-08-19 14:07:52] [Output] : ★ George Remington locates the fuse of the central locking system and takes it out,keeping it in his hand
[2019-08-19 14:08:14] [Output] : ★ George Remington then takes the alarm unit and puts it into the fuse box,pushing it's wire into the fuses's..
[2019-08-19 14:08:16] [Output] : ★ ...hole      ((George Remington))
[2019-08-19 14:08:32] [Output] : ★ George Remington then lets the unit sit and slides the fuse back into the hole
[2019-08-19 14:08:49] [Output] : ★ As the new alarm unit is now powered,the red blip would be visible      ((George Remington))
[2019-08-19 14:09:27] [Output] : ★ George Remington reaches for the cover and pushes it back in place,shuting the door closed