Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2015.01 (Mar 29 2015 - 12:41:12) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- I2C: re�dy
- DRAM: 2 GiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- Reserved 8192kB of RAM for Framebuffer.
- In: serial
- Out: serial
- Err: serial
- SCSI: SU���SCSI INIT
- SATA link 0 timeout.
- AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- flags: ncq s�ag pm led clo only pmp pio slum part ccc apst
- Ne�'�dwmac.1c50000
- (Re)start USB...
- USB0: USB EHCI 1.00
- scanning bus 0 for devices... 1 USB Device(s) found
- USB1: USB EHCI 1n00
- scanning bus 1 for devices... 1 USB Dmvice(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any kY^���stop autoboot: 0
- switch to parti�Z�k�#0, OK
- mmc0 is current device
- Scanning mmc 0.n.
- Found U-Boot script /boot.scr
- reading /boot.scr
- 1764 bytes read in 23 ms (74.2 KiB/s)
- ## Executing script at 43100000
- Load Linux...
- reading /zImage
- 2653728 bytes read in 217 ms (11.7 MiB/s)
- Load DTB�ɩH�reading /sun7i-a20-cubietruck.dtb
- 23743 bytes read in 33 ms (702.1 KiB/s)
- Booting...
- Kernel image @ 0x42000000 [ 0x000000 - 0x287e20 ]
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- Loading Device Tree to 4fff7000, end 4ffffcbe ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on phy�ical CPU 0x0
- [ 0.000000] Linux version 3.19.2 (mauro@Paxos+ (gcc version 4.9.1 20140710 (prgrelease) (crosstool-NG linaro-1.13.1-4.9-2014.07 - Linaro GCC 4.9-2014.07) ) #1 SMP Sun Mar 29 16:44:46 CEST 2015
- � 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine �odel: Cubietech Cubietruck
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @ee7dd000 s6400 r0 d22272 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520720
- [ 0.000000] Kernel command lyne: conwole=ttyS0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootdelay panic=10
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry caghe hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table ent�ZY.'�����Bzɑ��� 6, 262144 bytes)
- [ 0.000000] Memory: 2066308K/2088960K available (3870K kernel code, 197K rwdata, 776K rodata, 240K init, 227K bss, 22652K reserved, 0K cma-reserved, 1310720K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 -����0000 (3072 kB)
- +�r�������� vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] ������� : 0xbfe00000 - 0xc0000000 ( 2 MB)C�+�r�������� .text : 0xc0008000 - 0xc0491ab0 (4v47 kB)
- [ 0.000000] .data : 0xc04ce000 -��4ff460 ( 198 kB)
- [ 0.000000] .bss : 0xc04ff460 - 0xc0538384 ( 228 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phy�).
- [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41nw, wraps every 2863311519744ns
- [ 0.000020] Switching to timer-ba�"�����loop, resolution 41ns
- [ 0.000328] sched_clock: 32 bits a� 24MHz, resolution 41ns, wraps every 178956969942ns
- [ 0.000475] schedclck: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
- [ 0.000652] Console: colour dummy device 80x30
- [ 0.000678] Calibrating delay loop (skipped), value calculated�]����timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.000692] pid_max: d�fault: 32768 minimum: 301
- [ 0.000801] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- �[ 0.001376] CPU: Testing write buffer coherenc^'z�58 (order: 1, 8192 bytes)
- [ 0.001657] /cpus/cpu@0 missing c�k��frequency property
- [ 0.001676] /cpus/cpu@1 missing clock-frequency property
- [ 0.001689] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.001748] Setting up static identit^j���for 0x4����a0 - 0x403ad2f8
- [ 0.003075] C�UL'��ɕ���-1, cpu 1, socket 0, mpidr 80000001
- [ 0.003151] Brought up 2 CPUs
- [ 0.003167] SMP: Total of 2 processors activated (96.00 BogoMIPS).
- [ 0.003174] CPU: All CPU(s) started in HYP mode.
- [ 0.003179] CPU: Virtualization e�W�k���́available.
- [ 0.003777] devtmpfs: initialized
- [ 0.004539] VFP support v0.3: implementor 41 architecture 2 part 30 varia~t 7 rev 4
- [ 0.004986] pinctrl core: initialized pinctrl subsystem
- [ 0.010928] NEt: Registered protocol famil^��j
- [ 0.011267] DMA: preallocated 256 Ki� p��
- 2�Ɂatomic coherent allocations
- [ 0.016959] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.016976] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.023629] reg-fixed-voltage ahci-5v: could not find pctldev fo�r����/woc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
- [ 0.023658] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
- [ 0.023686] reg-fixed-volt�ge usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c2080��͉�_vbus_pin@0, deferring probe
- [ 0.023699] platfo�m usb0mvbus: Driver reg-fixed-voltage requests probe deferral
- [ 0.023721_ reg-fixed-voltage usb1-vbus: could not find pc���فfor node /soc@01c00000/pinctrl@01c20��z�͉�_vbus_pin@0, deferring probe
- [ 0.023732] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
- �[ 0.023766] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral0000/pinctrl@01g20800/usb2_vbus_pin@0, deferring probe
- [ 0.024438] reg-f�xed-voltage vmmc3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
- [ 0.024456] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
- [ 0.024919] SCSI subsystem`initia�Z�VH�+�r��������usbcore: registered new interface driver usbfs
- [ 0.025471] usbcore: registe�ed new interface driver hub
- [ 0.025530] usbcore: registered new device driver usb
- [ 0.025672] pps�core: LinuxPPS API ver. 1 registered
- [ 0.025680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.025707] PTP clock support registmred
- [ 0.026671] Switched to clocksource arch_sys_counter
- [ p.035926] NET: Registered protocol family 2
- { p.036552] TCP established hash table entries: 8392 (order: 3, 32768 bytes)
- [ 0.036697] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.036819] TCP: Hash tables configured (established 8192 b�nd 8192)
- [ 0.036907] TCP: reno registered
- [ 0.036923] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.036983] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.037222] NET: Registered protocol family 1
- [ 0.037602] RPC: RYVkѕɕ��named UNIX socket transport module.
- [ 0.037616] RPC: Registered udp transport module.
- [ 0.037622] RPC: Registered tcp transport module.
- [ 0.037628] RPC: Registered tcp NFSv4.1 ba��,+�����transport module.
- [ 0.038189] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.039296] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.049195] NFS: Registering the id_resolver key type
- [ 0.049267] Key type id_resolver registered
- [ 0.049276] Key type id_legacy registered
- [ 0.049454] bounce: pool size: 64 pages
- [ 0.049665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.049685] io scheduler noop regis|ered
- [ 0.049698] io scheduler deadline registered
- [ 0.049872] io s�hed}ler cfq registered (default)
- [ 0.050148] platform 1c13400.phy: Driver sun4i-usb-phy �equests probe deferral
- [ 0.052393] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.108058] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.111059] console [ttyS0] disabled
- [ 0.131220] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1u00000) is a W6_16550A
- [ 0.780372] console [ttyS0] enabled
- [ 0.785471] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
- [ 0.793555] stmmaceth 1c50000.ethernet: no regulator found
- [ 0.799138] stmmaceth 1c50000.ethernet: no reset control found
- [ 0.804967] Ring mode enabled
- [ 0.808031] No HW DMA feature registev supported
- [ 0.812555] Normal descriptors
- [ 0.815874] TX Checksum insertion supported
- [ 0.823711] libphy: stmmac: probed
- [ 0.827150] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
- [ 0.83s495] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
- [ 0.839403] ehci_hcd: U�B 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.845931] ehci-platform: EHCI generic platform driver
- [ 0.851332] platform 1c14000.usb: Driver ehci-platform requests probe deferral
- [ p.858644] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
- [ 0.865951] ohci_hcd: USB`1.1 'Open' Host Controller (OHCI) Driver
- [ 0.872208] ohci-platform: OHCI generic platform driver
- [ 0.877564] platform 1c14400.usb: Driver ohci-platform requests probe de�Y.��5
- [ 0.884839] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
- [ 0.892722] sunxi-rtc 1c20d00.rtc: rtc core: registered rtcmsun�i as rtc0
- [ 0.899561] sunxi-rtc 1c20d00.rtc: RtC enabled
- [ 0.904101] i2c /dev entries driver
- [ 0.908484] axp20x 0-0034: AX�&variant AXP209 found
- [ 0.917166] axp20x 0-0034: AXP20X driver loXVVH�[ 0.923396] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 0.931369] Driver 'mmcblk' needs updating - please use bus_type methods
- [ 0.938574] sunxi-m[,��f000.mmc: No vqmmc regulator found
- [ 0.944502] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 0.986826] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:26
- [ 0.9;2645] platform`1c12000.mmc: Driver sunxi-mmc requests probe deferral
- [ 1.001209] usbcore: registered new interface driver usbhid
- [ ��r������usbhid: USB HID core driver
- [ 1.011280] TCP: cubic registered
- [ 1.014623] NET: Registered protocol family 17
- [ 1.019209] Key type dns%�ͽ�ٕɁregistered
- [ 1.023584] Registering SWP/SWPB emulation handler
- [ 1.054474] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.065101] mmc0: new high speed SD card at address 0007
- [ 1��������mmcblk0: mmc0:0007 SD02G 1.85 GiB
- [ 1.078383] mmgblk0: p1 p2
- [ 1.096729] a���iչ1c18000.sata: controller can't d PMP, turning off CAP_PMP
- [ 1.104244] ahci-sunxi 1c18000.sata: SSS fla� set, parallel bus scan disabled
- [ 1.111419] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 1.120384] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
- [ 1.129723] scsi host0: ahci_platform
- [ 1.133ӊ��ata1: SATA ma� UDMA/133�[[Z
- ڵ���0x01c18000-0x01c18fff] port 0x100 irq 30
- [ 1.142019] ehci-platform 1c14000.usb: EHCI Host Cont���5
- [ 1.147661] ehci-platform 1c14000.usb: new USB bus registered, assZ����bus number 1
- [ 1.155526] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
- [ 1.176679] ehci-platform`1c14000.usb: USB 2.0 started, EHCI 1��j
- [ 1.183705] hub 1KҊr���M �hub found
- [ 1.187511] hub 1-0:1.0: 1 port detected
- [ 1.192103] ehci-�+љ�ɵ�1c1c0�r�͉� EHCI Host Controller
- [ 1.1;7728] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
- [ 1.205592] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
- [ 1.226678] ehci-platform 1c1c000.usb: USB 2.0 startedl EHCI 1.00
- [ 1.233623] hub 2-��r���M �hub found
- [ 1.237427] hub 2-0:1.0: 1 port detected
- [ 1.241931]�
- k��platform 1c14400.usb: Gen�ric Platform OHCI controller
- [ 1.248588] oh�� ��љ�ɵ�1c14400.�sbz new USB bus registered, assigned bus numfer 3
- [ 1.256475] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
- [ 1.321499] hub 3-0:1.0: USB hub found
- [ 1.325299] hub 3-0:1.0: 1 port detected
- [ 1.329880] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 1.336517] ohci-platform 1c1c400.usb: new USB bus registered, assign�d bus number 4C�[ 1�&S���ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
- [ 1.411496] hub 4-0:1.0: USB hub found
- [ 1.415283] hub 4-0:1.0: 1 port detected
- [ 1.420149] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
- [ 1.456682] sunxi-mmc 1c12000.mmc: base:0xf00fe000 irq:27
- [ 1.462188] sunxi-rtc 1c20d00.rtc: setting sywtem clock to 1970-01-07 02:14:40 UTC (526480)
- [ 1.470552] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
- [ 1.480410] usb0-vbus: disabling
- [ 1.483670] vcc5v0: disabling
- [ 1.486688] vcc3v0: disabling
- [ 1�������ata1: SATA li�-"�ݹ�(SStatus 0 SControl 300)
- [ 1.499623] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.506621] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.513639] mm�1: queuing unknown CIS t�ple 0x80 (3 bytes)
- [ 1.516329] EXT4-fs (mmcb�-��): mounted filesystem w�th ordered data mode. Opts: (null)
- [ 1.516380] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 1.527602] devtmpfs: mounted
- [ 1.527876] Freeing unused kernel memory: 240K (c0492000 - c04ce000)
- [ 1.546071] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 1.567091] mmc1: new high speed SDIO card at address 0001
- [ 1.807705] random: init urandom`read with 7 bits of entropy available
- [ 2.025313] init: plymouth-upstart-bridge main process (44) terminated with status 1
- [ 2.033315] init: plymouth-upstart-bridge main process ended, respawning
- [ 2.076124] init: plymouth-ups|art-bridge main process (=u) terminated with status 1
- [ 2.088552] init: plymouth-upstart-bridge main process ended, respawning
- [ 2.096020] init: ureadahead main process (46) terminated with status 5
- [ 2.174729] init: plymouth-upstart-bridge main process (59) terminated with status 1
- [ 2.182646] init: plymouth-upstart-bridge main process ended, respawning
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement