Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Booting Linux on physical CPU 0
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.4.106~AK.122.OPO.SKULL.CM12 (ak@kernel) (gcc version 4.9.3 20150117 (prerelease) (SaberMod-4.9.x_arm-graphite) ) #1 SMP PREEMPT Wed Feb 25 05:22:28 MST 2015
- <4>[ 0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- <6>[ 0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC One+ A0001
- <6>[ 0.000000] Hardboot page reserved at 0x2FA00000
- <6>[ 0.000000] Initialized persistent memory from 50000000-500fffff
- <6>[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
- <6>[ 0.000000] cma: Found secure_region, memory base 0x00000000, size 252 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found adsp_region, memory base 0x00000000, size 63 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found qsecom_region, memory base 0x00000000, size 17 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found audio_region, memory base 0x00000000, size 12 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found external_image_region@fa00000, memory base 0x0fa00000, size 5 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found peripheral_region@5a00000, memory base 0x05a00000, size 33 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found tz_apps@0x7b00000, memory base 0x07b00000, size 5 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found modem_region@0x8000000, memory base 0x08000000, size 82 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: Found oem_data_region@5900000, memory base 0x05900000, size 1 MiB, limit 0xffffffff
- <6>[ 0.000000] cma: CMA: reserved 252 MiB at 0xb0400000 for secure_mem
- <6>[ 0.000000] cma: CMA: reserved 64 MiB at 0xac400000 for adsp_mem
- <6>[ 0.000000] cma: CMA: reserved 20 MiB at 0xab000000 for qseecom_mem
- <6>[ 0.000000] cma: CMA: reserved 16 MiB at 0xaa000000 for audio_mem
- <6>[ 0.000000] cma: CMA: reserved 5 MiB at 0x0fa00000 for (null)
- <6>[ 0.000000] cma: CMA: reserved 33 MiB at 0x05a00000 for peripheral_mem
- <6>[ 0.000000] cma: CMA: reserved 5 MiB at 0x07b00000 for tz_apps
- <6>[ 0.000000] cma: CMA: reserved 82 MiB at 0x08000000 for modem_mem
- <6>[ 0.000000] cma: CMA: reserved 1 MiB at 0x05900000 for oem_data
- <6>[ 0.000000] cma: CMA: reserved 16 MiB at 0x2e800000 for default region
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] IMEM DT static mapping successful
- <7>[ 0.000000] On node 0 totalpages: 753920
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c15dff40, node_mem_map cd200000
- <7>[ 0.000000] Normal zone: 1520 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 160784 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 4624 pages used for memmap
- <7>[ 0.000000] HighMem zone: 586992 pages, LIFO batch:31
- <6>[ 0.000000] PERCPU: Embedded 10 pages/cpu @cea5c000 s17792 r8192 d14976 u40960
- <7>[ 0.000000] pcpu-alloc: s17792 r8192 d14976 u40960 alloc=10*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747776
- <5>[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1 androidboot.emmc=true androidboot.serialno=8560c2de console=ttyHSL0,115200,n8 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 ddr_manufacture_info=Elpida LCD_id<4 oppo.rf_version=66 maxcpus=4 androidboot.startupmode=pwrkey androidboot.mode=kernel lk_version=V1.0
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 89MB 40MB 507MB 2309MB = 2945MB total
- <5>[ 0.000000] Memory: 2555820k/2555820k available, 589908k reserved, 2004992K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc137a6e0 (19914 kB)
- <5>[ 0.000000] .init : 0xc1400000 - 0xc150e580 (1082 kB)
- <5>[ 0.000000] .data : 0xc1510000 - 0xc1619954 (1063 kB)
- <5>[ 0.000000] .bss : 0xc1619978 - 0xc180d3ac (1999 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- <6>[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- <6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
- <6>[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
- <6>[ 0.000000] Switching to timer-based delay loop
- <6>[ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- <6>[ 0.000054] pid_max: default: 32768 minimum: 301
- <6>[ 0.000154] Security Framework initialized
- <6>[ 0.000180] SELinux: Initializing.
- <7>[ 0.000211] SELinux: Starting in permissive mode
- <6>[ 0.000256] Mount-cache hash table entries: 512
- <6>[ 0.045754] Initializing cgroup subsys debug
- <6>[ 0.045766] Initializing cgroup subsys cpuacct
- <6>[ 0.045774] Initializing cgroup subsys freezer
- <6>[ 0.045783] Initializing cgroup subsys bfqio
- <6>[ 0.045819] CPU: Testing write buffer coherency: ok
- <6>[ 0.045985] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>[ 0.046040] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- <6>[ 0.048775] Setting up static identity map for 0xee14b8 - 0xee1540
- <6>[ 0.048791] MSM Memory Dump table set up
- <6>[ 0.050114] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- <6>[ 0.050766] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- <6>[ 0.051380] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- <6>[ 0.051440] Brought up 4 CPUs
- <6>[ 0.051451] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- <6>[ 0.060498] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
- <6>[ 0.060953] dummy:
- <6>[ 0.073148] NET: Registered protocol family 16
- <6>[ 0.074989] DMA: preallocated 256 KiB pool for atomic coherent allocations
- <6>[ 0.076217] KPI: Bootloader start count = 1215007860
- <6>[ 0.076226] KPI: Bootloader end count = 4196343232
- <6>[ 0.076232] KPI: Bootloader display count = 2437275408
- <6>[ 0.076239] KPI: Bootloader load kernel count = 3359335114
- <6>[ 0.076248] KPI: Kernel MPM timestamp = 157925
- <6>[ 0.076254] KPI: Kernel MPM Clock frequency = 32768
- <6>[ 0.076270] socinfo_print: v9, id=194, ver=1.1, raw_id=1972, raw_ver=1 ,hw_plat=8, hw_plat_ver=65536
- <6>[ 0.076274] accessory_chip=0,hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609,foundry_id=1
- <3>[ 0.076490] msm_8974_init_gpiomux:1477 socinfo_get_version 10001
- <6>[ 0.089633] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
- <6>[ 0.106322] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- <6>[ 0.124158] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
- <6>[ 0.124523] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
- <6>[ 0.124873] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
- <6>[ 0.125259] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
- <6>[ 0.125614] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.125967] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.126350] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.126729] 8841_s3: 1050 mV normal idle
- <6>[ 0.127111] 8841_s4: 500 <--> 900 mV at 0 mV normal idle
- <6>[ 0.127476] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.127830] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.128192] 8941_s1: 1300 mV normal idle
- <6>[ 0.128561] 8941_s2: 2150 mV normal idle
- <6>[ 0.128917] 8941_s3: 1800 mV normal idle
- <6>[ 0.129303] 8941_l1: 1225 mV normal idle
- <6>[ 0.129674] 8941_l2: 1200 mV normal idle
- <6>[ 0.130033] 8941_l3: 1000 <--> 1225 mV at 1000 mV normal idle
- <6>[ 0.130412] 8941_l4: 1225 mV normal idle
- <6>[ 0.130775] 8941_l5: 1800 mV normal idle
- <6>[ 0.131154] 8941_l6: 1800 mV normal idle
- <6>[ 0.131518] 8941_l7: 1800 mV normal idle
- <6>[ 0.131886] 8941_l8: 1800 mV normal idle
- <6>[ 0.132266] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
- <6>[ 0.132643] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
- <6>[ 0.133035] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle
- <6>[ 0.133400] 8941_l12: 1800 mV normal idle
- <6>[ 0.133751] 8941_l12_ao: 1800 mV normal idle
- <6>[ 0.134124] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- <6>[ 0.134510] 8941_l14: 1800 mV normal idle
- <6>[ 0.134888] 8941_l15: 2050 mV normal idle
- <6>[ 0.135261] 8941_l16: 2700 mV normal idle
- <6>[ 0.135645] 8941_l17: 2700 <--> 2850 mV at 2700 mV normal idle
- <6>[ 0.136017] 8941_l18: 2850 mV normal idle
- <6>[ 0.136418] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
- <6>[ 0.136793] 8941_l20: 2950 mV normal idle
- <6>[ 0.137190] 8941_l21: 2950 mV normal idle
- <6>[ 0.137571] 8941_l22: 3000 mV normal idle
- <6>[ 0.137971] 8941_l23: 2800 <--> 3000 mV at 2800 mV normal idle
- <6>[ 0.138347] 8941_l24: 3075 mV normal idle
- <6>[ 0.138703] 8941_lvs1:
- <6>[ 0.139036] 8941_lvs2:
- <6>[ 0.139357] 8941_lvs3:
- <6>[ 0.141400] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
- <6>[ 0.141411] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
- <6>[ 0.141678] krait0: 500 <--> 1250 mV at 900 mV fast normal idle
- <6>[ 0.142091] krait1: 500 <--> 1250 mV at 900 mV fast normal idle
- <6>[ 0.142494] krait2: 500 <--> 1250 mV at 900 mV fast normal idle
- <6>[ 0.142891] krait3: 500 <--> 1250 mV at 900 mV fast normal idle
- <6>[ 0.171194] msm_thermal:msm_thermal_dev_probe msm_thermal: msm_thermal_dev_probe begin...
- <6>[ 0.171240] msm-thermal qcom,msm-thermal.70: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <3>[ 0.171265] msm_thermal:probe_vdd_rstr Array size:6 too large for index:2
- <6>[ 0.171279] msm-thermal qcom,msm-thermal.70: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
- <6>[ 0.171295] msm-thermal qcom,msm-thermal.70: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
- <6>[ 0.171401] msm_thermal:msm_thermal_init msm_thermal: polling enabled!
- <6>[ 0.171420] msm_thermal:msm_thermal_dev_probe msm_thermal: msm_thermal_dev_probe completed!
- <6>[ 0.171796] persistent_ram: found existing buffer, size 49308, start 49308
- <6>[ 0.207572] console [ram-1] enabled
- <4>[ 0.207671] 8941_l18: Failed to create debugfs directory
- <6>[ 0.208019] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- <6>[ 0.208095] hw-breakpoint: maximum watchpoint size is 8 bytes.
- <6>[ 0.209783] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
- <6>[ 0.209872] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
- <6>[ 0.210009] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 3
- <6>[ 0.210140] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
- <6>[ 0.212984] L2 @ 729600 KHz
- <6>[ 0.213210] CPU0 @ 960000 KHz
- <6>[ 0.213339] CPU1 @ unknown rate. Forcing new rate.
- <6>[ 0.213500] CPU1 @ 300000 KHz
- <6>[ 0.213571] CPU2 @ unknown rate. Forcing new rate.
- <6>[ 0.213786] CPU2 @ 300000 KHz
- <6>[ 0.213858] CPU3 @ unknown rate. Forcing new rate.
- <6>[ 0.214016] CPU3 @ 300000 KHz
- <6>[ 0.216739] 8941_boost: 4500 mV
- <6>[ 0.217247] 8941_mvs1:
- <3>[ 0.217373] qcom,qpnp-regulator qpnp-regulator-ee24f000: Failed to find supply parent
- <6>[ 0.217663] spmi qpnp-regulator-ee24f000: Driver qcom,qpnp-regulator requests probe deferral
- <6>[ 0.218045] 8941_mvs2:
- <6>[ 0.218154] 8941_mvs2: supplied by 8941_boost
- <6>[ 0.224208] sps:BAM 0xf9984000 (va:0xc5c60000) enabled: ver:0x6, number of pipes:20
- <6>[ 0.224342] sps:BAM 0xf9984000 is registered.
- <6>[ 0.224422] sps:sps is ready.
- <6>[ 0.226085] gdsc_venus:
- <6>[ 0.226484] gdsc_mdss:
- <6>[ 0.226829] gdsc_jpeg:
- <6>[ 0.227201] gdsc_vfe:
- <6>[ 0.227523] gdsc_oxili_gx:
- <6>[ 0.227738] gdsc_oxili_gx: supplied by 8841_s4_corner
- <6>[ 0.228080] gdsc_oxili_cx:
- <6>[ 0.228381] gdsc_usb_hsic:
- <3>[ 0.229052] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- <6>[ 0.234405] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
- <6>[ 0.235298] Physical OCMEM zone layout:
- <6>[ 0.235375] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
- <6>[ 0.235511] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
- <6>[ 0.235589] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
- <6>[ 0.249375] bio: create slab <bio-0> at 0
- <6>[ 0.249975] platform spi_eth_phy_vreg.80: Driver reg-fixed-voltage requests probe deferral
- <6>[ 0.250494] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- <3>[ 0.250580] ION-heap mm: Cannot specify alignment for this type of heap
- <6>[ 0.250695] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
- <3>[ 0.250778] ION-heap adsp: Cannot specify alignment for this type of heap
- <6>[ 0.250891] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- <6>[ 0.251043] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- <6>[ 0.251165] cma: Assigned CMA region at 5a00000 to 17.qcom,ion-heap device
- <6>[ 0.251321] cma: Assigned CMA region at 8000000 to 1a.qcom,ion-heap device
- <6>[ 0.251489] ION heap system created
- <6>[ 0.251644] ION heap kmalloc created
- <6>[ 0.251698] ION heap mm created at 0xb0400000 with size fc00000
- <6>[ 0.251750] ION heap adsp created at 0xac400000 with size 3f00000
- <6>[ 0.251800] ION heap qsecom created at 0xab000000 with size 1100000
- <6>[ 0.251884] ION heap audio created at 0xaa000000 with size c04000
- <6>[ 0.251934] ION heap pil_1 created at 0x05a00000 with size 2100000
- <6>[ 0.252017] ION heap pil_2 created at 0x08000000 with size 5200000
- <5>[ 0.252865] SCSI subsystem initialized
- <6>[ 0.253026] usbcore: registered new interface driver usbfs
- <6>[ 0.253109] usbcore: registered new interface driver hub
- <6>[ 0.253248] usbcore: registered new device driver usb
- <6>[ 0.253540] Linux media interface: v0.10
- <6>[ 0.253601] Linux video capture interface: v2.00
- <6>[ 0.255419] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks
- <6>[ 0.256392] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks
- <6>[ 0.257683] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks
- <6>[ 0.258618] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks
- <6>[ 0.259492] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks
- <6>[ 0.260450] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- <6>[ 0.260561] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
- <6>[ 0.260699] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- <6>[ 0.260848] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
- <6>[ 0.260972] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
- <6>[ 0.261111] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
- <6>[ 0.261259] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- <6>[ 0.261374] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
- <6>[ 0.261517] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- <6>[ 0.261658] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
- <6>[ 0.261799] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- <6>[ 0.261948] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- <6>[ 0.262087] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- <6>[ 0.262226] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- <6>[ 0.262342] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
- <6>[ 0.262452] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
- <6>[ 0.262597] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
- <6>[ 0.264217] Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>[ 0.264582] Bluetooth: Core ver 2.16
- <6>[ 0.264650] NET: Registered protocol family 31
- <6>[ 0.264722] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.264764] Bluetooth: HCI socket layer initialized
- <6>[ 0.264837] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.264997] Bluetooth: SCO socket layer initialized
- <6>[ 0.265231] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.265286] cfg80211: World regulatory domain updated:
- <6>[ 0.265359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 0.265401] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265473] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265544] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265584] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265655] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265728] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265768] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.265840] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- <6>[ 0.266020] nfc: nfc_init: NFC Core ver 0.1
- <6>[ 0.266087] NET: Registered protocol family 39
- <6>[ 0.266441] Switching to clocksource arch_sys_counter
- <6>[ 0.283622] NET: Registered protocol family 2
- <6>[ 0.283781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.284281] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.285867] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 0.286731] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.286818] TCP: reno registered
- <6>[ 0.286864] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.286980] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.287258] NET: Registered protocol family 1
- <6>[ 0.287602] Trying to unpack rootfs image as initramfs...
- <6>[ 0.325862] Freeing initrd memory: 1476K
- <6>[ 0.329201] Detected 9 counters on the L2CC PMU.
- <6>[ 0.330539] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
- <6>[ 0.330852] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
- <6>[ 0.330988] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
- <6>[ 0.331345] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
- <6>[ 0.331448] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
- <6>[ 0.331796] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
- <6>[ 0.331927] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
- <6>[ 0.332277] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
- <6>[ 0.332406] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
- <6>[ 0.332740] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
- <6>[ 0.332886] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
- <6>[ 0.333216] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
- <6>[ 0.333346] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
- <6>[ 0.333717] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
- <6>[ 0.333842] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
- <6>[ 0.334219] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
- <6>[ 0.334324] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
- <6>[ 0.334709] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
- <6>[ 0.336131] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
- <6>[ 0.338845] pil_pronto fb21b000.qcom,pronto: using secure boot
- <6>[ 0.340094] pil_venus fdce0000.qcom,venus: using secure boot
- <6>[ 0.345640] NET: Registered protocol family 27
- <5>[ 0.350963] msm_rpm_log_probe: OK
- <6>[ 0.358564] mpm_counter: [ 0.358558]:(167175)
- <6>[ 0.359573] audit: initializing netlink socket (disabled)
- <5>[ 0.359697] type=2000 audit(0.330:1): initialized
- <4>[ 0.360870] highmem bounce pool size: 64 pages
- <6>[ 0.363982] NTFS driver 2.1.30 [Flags: R/W].
- <6>[ 0.364170] fuse init (API version 7.18)
- <6>[ 0.364402] exFAT: Core Version 1.2.9
- <6>[ 0.364476] exFAT: FS Version 1.2.9
- <6>[ 0.364575] msgmni has been set to 1110
- <7>[ 0.364637] SELinux: Registering netfilter hooks
- <6>[ 0.366665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- <6>[ 0.366742] io scheduler noop registered
- <6>[ 0.366783] io scheduler deadline registered (default)
- <6>[ 0.366863] io scheduler row registered
- <6>[ 0.366964] io scheduler cfq registered
- <6>[ 0.367015] io scheduler fiops registered
- <6>[ 0.367089] io scheduler sio registered
- <6>[ 0.367129] io scheduler sioplus registered
- <6>[ 0.367285] io scheduler bfq registered
- <6>[ 0.367358] BFQ I/O-scheduler version: v7r7
- <6>[ 0.367398] io scheduler zen registered
- <6>[ 0.367472] io scheduler vr registered
- <6>[ 0.367543] io scheduler tripndroid registered
- <6>[ 0.367756] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
- <6>[ 0.368757] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
- <6>[ 0.371840] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
- <4>[ 0.374579] lm3630_chip_init: bl_initvalue=80
- <4>[ 0.374623] lm3630_chip_init: bl_initvalue=80,222
- <4>[ 0.375130] lm3630_probe:yanghai client irq =0
- <4>[ 0.375172] lm3630_probe:yanghai----
- <3>[ 0.375213] lm3630_bl 2-0036: LM3630 backlight register OK.
- <6>[ 0.375627] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
- <6>[ 0.375718] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d5e000
- <3>[ 0.375872] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
- <6>[ 0.377825] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- <6>[ 0.377942] mdss_dsi_panel_init: Panel Name = jdi 1080p cmd mode dsi panel
- <6>[ 0.378178] mdss_dsi_parse_panel_features: partial_update_enabled=1
- <6>[ 0.378255] mdss_dsi_parse_panel_features: ulps feature enabled
- <6>[ 0.378297] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- <6>[ 0.378409] mdss_dsi_panel_init: Continuous splash enabled
- <3>[ 0.378827] dsi_panel_device_register:1676, lcd 5v en gpio not specified
- <6>[ 0.378988] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5d72800 ctrl_size=1f8 phy_base=c5d74b00 phy_size=2b0
- <6>[ 0.406868] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
- <6>[ 0.407178] mdss_hw_init: MDP Rev=10020001
- <6>[ 0.408471] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- <3>[ 0.408541] controller config is not present
- <3>[ 0.408615] mdss_dsi_pref_prim_panel:can't find panel phandle
- <3>[ 0.408656] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_1080p_cmd
- <4>[ 0.408736] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 29
- <6>[ 0.409846] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
- <6>[ 0.410718] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
- <7>[ 0.410920] Registered led device: lcd-backlight
- <6>[ 0.411017] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
- <3>[ 0.411704] sps: BAM device 0xf9944000 is not registered yet.
- <6>[ 0.411751] sps:BAM 0xf9944000 is registered.
- <6>[ 0.414152] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
- <4>[ 0.417868] kgsl bus ib [0] = 2456000000
- <4>[ 0.417942] kgsl bus ib [1] = 3680000000
- <4>[ 0.417982] kgsl bus ib [2] = 4912000000
- <4>[ 0.418022] kgsl bus ib [3] = 7464000000
- <4>[ 0.418094] kgsl bus index is 3 for pwrlevel 0
- <4>[ 0.418134] kgsl bus index is 2 for pwrlevel 1
- <4>[ 0.418174] kgsl bus index is 2 for pwrlevel 2
- <4>[ 0.418246] kgsl bus index is 1 for pwrlevel 3
- <4>[ 0.418285] kgsl bus index is 0 for pwrlevel 4
- <6>[ 0.419002] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- <6>[ 0.424035] brd: module loaded
- <6>[ 0.425582] loop: module loaded
- <6>[ 0.425861] zram: Created 1 device(s) ...
- <4>[ 0.432051] QSEECOM: qseecom_probe: support_bus_scaling=0x1
- <4>[ 0.432127] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- <4>[ 0.432205] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
- <4>[ 0.432314] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
- <4>[ 0.432391] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- <4>[ 0.432530] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
- <6>[ 0.433475] yanghai shineld driver init
- <3>[ 0.433609] SN3193_power:yuyi for SN3193_SDB gpio---
- <6>[ 0.536551] SN3193_probe:sn3193 probe
- <7>[ 0.536679] Registered led device: red
- <7>[ 0.536718] Registered led device: green
- <7>[ 0.536759] Registered led device: blue
- <4>[ 0.537693] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 0.537768] i2c-core: driver [tabla-i2c-core] using legacy resume method
- <4>[ 0.537902] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- <4>[ 0.537945] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- <6>[ 0.538038] Loading pn544 driver
- <4>[ 0.538116] yuyi,clk_prepare_enable,return ret = 0
- <6>[ 0.538204] pn544_probe : requesting IRQ 345
- <6>[ 0.556852] SCSI Media Changer driver v0.25
- <6>[ 0.557640] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
- <6>[ 0.557993] spi_qsd f9966000.spi: master is unqueued, this is deprecated
- <4>[ 0.561700] spi_qsd f9965000.spi: using default bus_num -1
- <6>[ 0.561958] spi_qsd f9965000.spi: master is unqueued, this is deprecated
- <6>[ 0.566097] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.566140] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.566275] rmnet_init: BAM devices[9]
- <6>[ 0.569536] PPP generic driver version 2.4.2
- <6>[ 0.569657] PPP BSD Compression module registered
- <6>[ 0.569730] PPP Deflate Compression module registered
- <6>[ 0.570225] PPP MPPE Compression module registered
- <6>[ 0.570300] NET: Registered protocol family 24
- <6>[ 0.570366] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 0.570440] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 0.570745] wcnss_wlan probed in built-in mode
- <6>[ 0.571574] usbcore: registered new interface driver asix
- <6>[ 0.571699] usbcore: registered new interface driver cdc_ether
- <6>[ 0.571801] usbcore: registered new interface driver net1080
- <6>[ 0.571872] usbcore: registered new interface driver cdc_subset
- <6>[ 0.571974] usbcore: registered new interface driver zaurus
- <6>[ 0.572109] usbcore: registered new interface driver cdc_ncm
- <6>[ 0.575748] dwc3 f9200000.dwc3: maximum speed: high
- <6>[ 0.821892] usbcore: registered new interface driver cdc_acm
- <6>[ 0.821967] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.822009] Initializing USB Mass Storage driver...
- <6>[ 0.822116] usbcore: registered new interface driver usb-storage
- <6>[ 0.822158] USB Mass Storage support registered.
- <6>[ 0.822259] usbcore: registered new interface driver ums-alauda
- <6>[ 0.822329] usbcore: registered new interface driver ums-cypress
- <6>[ 0.822427] usbcore: registered new interface driver ums-datafab
- <6>[ 0.822493] usbcore: registered new interface driver ums_eneub6250
- <6>[ 0.822590] usbcore: registered new interface driver ums-freecom
- <6>[ 0.822689] usbcore: registered new interface driver ums-isd200
- <6>[ 0.822756] usbcore: registered new interface driver ums-jumpshot
- <6>[ 0.822853] usbcore: registered new interface driver ums-karma
- <6>[ 0.822920] usbcore: registered new interface driver ums-onetouch
- <6>[ 0.823020] usbcore: registered new interface driver ums-sddr09
- <6>[ 0.823087] usbcore: registered new interface driver ums-sddr55
- <6>[ 0.823185] usbcore: registered new interface driver ums-usbat
- <6>[ 0.823288] usbcore: registered new interface driver usbserial
- <6>[ 0.823361] usbserial: USB Serial Driver core
- <6>[ 0.823983] file system registered
- <6>[ 0.824059] mbim_init: initialize 1 instances
- <6>[ 0.824176] mbim_init: Initialized 1 ports
- <6>[ 0.825083] rndis_qc_init: initialize rndis QC instance
- <6>[ 0.825373] gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.825415] gadget: Number of LUNs=1
- <6>[ 0.825456] lun0: LUN: removable file: (no medium)
- <6>[ 0.825704] gadget: android_usb ready
- <6>[ 0.826238] mousedev: PS/2 mouse device common for all mice
- <6>[ 0.826469] usbcore: registered new interface driver xpad
- <6>[ 0.826565] usbcore: registered new interface driver usb_acecad
- <6>[ 0.826669] usbcore: registered new interface driver aiptek
- <6>[ 0.826741] usbcore: registered new interface driver gtco
- <6>[ 0.826845] usbcore: registered new interface driver hanwang
- <6>[ 0.826917] usbcore: registered new interface driver kbtab
- <6>[ 0.827021] usbcore: registered new interface driver wacom
- <4>[ 0.827204] 8941_l22: Failed to create debugfs directory
- <4>[ 0.827299] 8941_s3: Failed to create debugfs directory
- <3>[ 1.336556] [syna] vendor id: 2
- <4>[ 1.616035] [syna]maxx=1080,maxy=2040,vkh=114
- <6>[ 1.616209] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
- <4>[ 1.616303] [syna]maxx=1080,maxy=2040,vkh=114
- <4>[ 2.365344] [syna]maxx=1080,maxy=2040,vkh=114
- <6>[ 2.397335] qcom,qpnp-rtc qpnp-rtc-ee24e600: rtc core: registered qpnp_rtc as rtc0
- <6>[ 2.397534] i2c /dev entries driver
- <7>[ 2.398992] msm_vidc: 1: debugfs_create_file: firmware_unload_delay fail
- <3>[ 2.400365] msm_cci_probe: pdev ee23da00 device id = -1
- <7>[ 2.404419] Registered led device: torch-light
- <3>[ 3.027812] msm_eeprom_platform_probe line 901
- <3>[ 3.114657] msm_sensor_power_up:988
- <3>[ 3.133361] msm_sensor_power_up exit
- <3>[ 3.133599] msm_sensor_power_down:1172
- <4>[ 3.145309] [syna]maxx=1080,maxy=2040,vkh=114
- <3>[ 3.150381] msm_sensor_power_down exit
- <3>[ 3.150464] [sensor_proc_init]: create qcom_sensor_state proc success
- <3>[ 3.151147] msm_sensor_power_up:988
- <3>[ 3.173276] msm_sensor_power_up exit
- <3>[ 3.173476] msm_sensor_power_down:1172
- <3>[ 3.194373] msm_sensor_power_down exit
- <3>[ 3.194454] [sensor_proc_init]: create qcom_sensor_state_1 proc success
- <3>[ 3.195884] __msm_jpeg_init:946] Jpeg Device id 0
- <3>[ 3.196139] __msm_jpeg_init:946] Jpeg Device id 1
- <3>[ 3.196373] __msm_jpeg_init:946] Jpeg Device id 2
- <6>[ 3.212365] usbcore: registered new interface driver uvcvideo
- <6>[ 3.212478] USB Video Class driver (1.1.1)
- <4>[ 3.212971] i2c-core: driver [bq27541-battery] using legacy suspend method
- <4>[ 3.213046] i2c-core: driver [bq27541-battery] using legacy resume method
- <6>[ 3.213561] spmi qpnp-charger-ee24e000: Driver qcom,qpnp-charger requests probe deferral
- <4>[ 3.213715] lfc bq24196_probe
- <6>[ 3.215804] bq24196 SYS_STS:0x0,fault_reg:0x0
- <6>[ 3.220540] bq27541-battery 1-0055: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
- <6>[ 3.220583] bq27541-battery 1-0055: Complete bq27541 configuration 0x600B
- <6>[ 3.269097] device-mapper: uevent: version 1.0.3
- <6>[ 3.269247] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>[ 3.269390] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- <6>[ 3.269392]
- <6>[ 3.269505] Bluetooth: HCI UART driver ver 2.2
- <6>[ 3.269547] Bluetooth: HCIATH3K protocol initialized
- <6>[ 3.271220] cpuidle: using governor ladder
- <6>[ 3.271264] cpuidle: using governor menu
- <6>[ 3.271324] sdhci: Secure Digital Host Controller Interface driver
- <6>[ 3.271397] sdhci: Copyright(c) Pierre Ossman
- <6>[ 3.271436] sdhci-pltfm: SDHCI platform and OF driver helper
- <6>[ 3.274396] mmc0: no vmmc regulator found
- <7>[ 3.274620] Registered led device: mmc0::
- <6>[ 3.275747] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
- <6>[ 3.280198] mmc1: no vmmc regulator found
- <7>[ 3.280344] Registered led device: mmc1::
- <6>[ 3.281456] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
- <3>[ 3.281927] qcom,leds-qpnp leds-qpnp-ee24f600: Regulator get failed(-517)
- <3>[ 3.281970] qcom,leds-qpnp leds-qpnp-ee24f600: Unable to read flash config data
- <6>[ 3.282048] spmi leds-qpnp-ee24f600: Driver qcom,leds-qpnp requests probe deferral
- <7>[ 3.282296] Registered led device: button-backlight
- <7>[ 3.282590] Registered led device: kpdbl-lut-2
- <7>[ 3.282743] Registered led device: kpdbl-pwm-3
- <7>[ 3.282903] Registered led device: kpdbl-pwm-4
- <4>[ 3.283217] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
- <4>[ 3.283259] QCE50: __qce_get_device_tree_data: ce-device =0x0
- <4>[ 3.283376] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- <4>[ 3.283452] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6040000
- <4>[ 3.283559] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- <4>[ 3.283632] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- <6>[ 3.284040] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
- <6>[ 3.284117] qce qcedev.0: CE device = 0x0
- <6>[ 3.284118] , IO base, CE = 0xc6040000
- <6>[ 3.284120] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- <6>[ 3.284121] IO base BAM = 0x0
- <6>[ 3.284123] BAM IRQ 268
- <6>[ 3.284124] Engines Availability = 0x1010853
- <6>[ 3.284437] sps:BAM 0xfd444000 is registered.
- <6>[ 3.284712] sps:BAM 0xfd444000 (va:0xc6020000) enabled: ver:0x20, number of pipes:8
- <6>[ 3.285109] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- <6>[ 3.285373] qcedev: FIPS140-2 Known Answer Tests : Skipped
- <4>[ 3.285905] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
- <4>[ 3.285981] QCE50: __qce_get_device_tree_data: ce-device =0x0
- <4>[ 3.286081] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- <4>[ 3.286193] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6080000
- <4>[ 3.286269] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- <4>[ 3.286342] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- <6>[ 3.286999] qcrypto fd440000.qcom,qcrypto: Qualcomm Crypto 5.1.0 device found @0xfd440000
- <6>[ 3.287044] qcrypto fd440000.qcom,qcrypto: CE device = 0x0
- <6>[ 3.287046] , IO base, CE = 0xc6080000
- <6>[ 3.287047] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- <6>[ 3.287049] IO base BAM = 0x0
- <6>[ 3.287050] BAM IRQ 268
- <6>[ 3.287051] Engines Availability = 0x1010853
- <6>[ 3.287763] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- <6>[ 3.288072] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-aes
- <6>[ 3.288284] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-aes
- <6>[ 3.288407] qcrypto fd440000.qcom,qcrypto: qcrypto-ctr-aes
- <6>[ 3.288577] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-des
- <6>[ 3.288711] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-des
- <6>[ 3.288869] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-3des
- <6>[ 3.288992] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-3des
- <6>[ 3.289116] qcrypto fd440000.qcom,qcrypto: qcrypto-xts-aes
- <6>[ 3.289241] qcrypto fd440000.qcom,qcrypto: qcrypto-sha1
- <6>[ 3.289365] qcrypto fd440000.qcom,qcrypto: qcrypto-sha256
- <6>[ 3.289520] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- <6>[ 3.289676] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- <6>[ 3.289800] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- <6>[ 3.289961] qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha1
- <6>[ 3.290086] qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha256
- <6>[ 3.290245] qcrypto fd440000.qcom,qcrypto: qcrypto-aes-ccm
- <6>[ 3.290368] qcrypto fd440000.qcom,qcrypto: qcrypto-rfc4309-aes-ccm
- <6>[ 3.290445] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- <4>[ 3.290506] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
- <4>[ 3.290580] QCE50: __qce_get_device_tree_data: ce-device =0x1
- <4>[ 3.290677] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- <4>[ 3.290787] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc60c0000
- <4>[ 3.290896] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- <4>[ 3.290936] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- <6>[ 3.291283] qcrypto fd440000.qcom,qcrypto1: Qualcomm Crypto 5.1.0 device found @0xfd440000
- <6>[ 3.291328] qcrypto fd440000.qcom,qcrypto1: CE device = 0x1
- <6>[ 3.291330] , IO base, CE = 0xc60c0000
- <6>[ 3.291331] , Consumer (IN) PIPE 0, Producer (OUT) PIPE 1
- <6>[ 3.291332] IO base BAM = 0x0
- <6>[ 3.291334] BAM IRQ 268
- <6>[ 3.291335] Engines Availability = 0x1010853
- <6>[ 3.292078] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- <6>[ 3.292243] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- <6>[ 3.294376] usbcore: registered new interface driver usbhid
- <6>[ 3.294417] usbhid: USB HID core driver
- <6>[ 3.294768] ashmem: initialized
- <6>[ 3.294880] logger: created 256K log 'log_main'
- <6>[ 3.294986] logger: created 256K log 'log_events'
- <6>[ 3.295131] logger: created 256K log 'log_radio'
- <6>[ 3.295239] logger: created 256K log 'log_system'
- <6>[ 3.295996] sps:BAM 0xf9304000 is registered.
- <6>[ 3.296054] sps:BAM 0xf9a44000 is registered.
- <3>[ 3.296136] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
- <6>[ 3.296513] qcom,qpnp-power-on qpnp-power-on-ee24d200: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
- <6>[ 3.296635] qcom,qpnp-power-on qpnp-power-on-ee24d200: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
- <6>[ 3.296865] input: qpnp_pon as /devices/virtual/input/input1
- <6>[ 3.297835] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
- <6>[ 3.298489] pft [pft_init]: Drivr initialized successfully Feb 25 2015 05:22:24.n
- <6>[ 3.298642] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
- <6>[ 3.298804] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
- <6>[ 3.299101] kraitbw-l2pm qcom,kraitbw-l2pm.41: BW HWmon governor registered.
- <3>[ 3.299764] devfreq qcom,cpubw.40: Couldn't update frequency transition information.
- <6>[ 3.300600] usbcore: registered new interface driver snd-usb-audio
- <6>[ 3.306873] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
- <6>[ 3.307834] platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral
- <6>[ 3.308203] platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral
- <6>[ 3.309980] ocmem: Notifier registered for 5
- <6>[ 3.310750] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.310894] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <6>[ 3.311739] oprofile: using arm/armv7-krait
- <6>[ 3.311833] u32 classifier
- <6>[ 3.311879] Actions configured
- <6>[ 3.311946] Netfilter messages via NETLINK v0.30.
- <6>[ 3.312014] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 3.312282] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 3.312351] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 3.312418] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 3.312535] xt_time: kernel timezone is -0000
- <6>[ 3.312744] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 3.312883] arp_tables: (C) 2002 David S. Miller
- <6>[ 3.312947] TCP: bic registered
- <6>[ 3.313013] TCP: cubic registered
- <6>[ 3.313050] TCP: westwood registered
- <6>[ 3.313087] TCP: highspeed registered
- <6>[ 3.313153] TCP: hybla registered
- <6>[ 3.313190] TCP: htcp registered
- <6>[ 3.313228] TCP: vegas registered
- <6>[ 3.313272] TCP: veno registered
- <6>[ 3.313341] TCP: scalable registered
- <6>[ 3.313377] TCP: lp registered
- <6>[ 3.313414] TCP: yeah registered
- <6>[ 3.313480] TCP: illinois registered
- <6>[ 3.313517] Initializing XFRM netlink socket
- <6>[ 3.313721] NET: Registered protocol family 10
- <6>[ 3.314738] Mobile IPv6
- <6>[ 3.314787] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 3.314909] IPv6 over IPv4 tunneling driver
- <6>[ 3.315191] NET: Registered protocol family 17
- <6>[ 3.315241] NET: Registered protocol family 15
- <5>[ 3.315324] Bridge firewalling registered
- <6>[ 3.315395] Ebtables v2.0 registered
- <6>[ 3.315450] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 3.315558] L2TP core driver, V2.0
- <6>[ 3.315601] PPPoL2TP kernel driver, V2.0
- <5>[ 3.315805] Registering SWP/SWPB emulation handler
- <6>[ 3.320017] [BRICKED] : msm_mpdec_init init complete.
- <6>[ 3.320087] intelli_plug: version 5.0
- <6>[ 3.320409] frandom: Seeded global generator now (used by erandom)
- <3>[ 3.320718] mdss_mdp_argc_config: mdss_mdp_argc_config, no dspp connects to disp 0
- <3>[ 3.320809] mdss_mdp_argc_config: mdss_mdp_argc_config, no dspp connects to disp 0
- <6>[ 3.320914] kcal_ctrl_init: registered
- <6>[ 3.321054] gdsc_oxili_gx: disabling
- <6>[ 3.321115] gdsc_venus: disabling
- <6>[ 3.321541] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.321712] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <3>[ 3.322204] qcom,leds-qpnp leds-qpnp-ee24f600: Regulator get failed(-517)
- <3>[ 3.322256] qcom,leds-qpnp leds-qpnp-ee24f600: Unable to read flash config data
- <6>[ 3.322350] spmi leds-qpnp-ee24f600: Driver qcom,leds-qpnp requests probe deferral
- <6>[ 3.327752] bq24196_vddmax_set voltage:4350
- <3>[ 3.328546] bad vbatdet:4250,default to 100mv
- <6>[ 3.329318] bq24196_ibatmax_set chg_current:2000
- <6>[ 3.331853] batfet:
- <6>[ 3.332002] 8941_smbb_otg:
- <6>[ 3.332059] 8941_smbb_otg: supplied by 8941_boost
- <6>[ 3.332337] 8941_smbb_boost: 5000 mV
- <6>[ 3.343391] bq24196_vddmax_set voltage:4350
- <6>[ 3.346436] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 1 batt_present = 1
- <6>[ 3.346625] ethernet_phy:
- <6>[ 3.346896] 8941_mvs1:
- <6>[ 3.346948] 8941_mvs1: supplied by 8941_smbb_otg
- <6>[ 3.347364] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.347587] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <7>[ 3.348059] Registered led device: led:flash_0
- <7>[ 3.348445] Registered led device: led:flash_1
- <7>[ 3.348579] Registered led device: led:flash_torch
- <6>[ 3.348787] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.348969] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <6>[ 3.350058] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.350291] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <6>[ 3.350871] input: gpio-keys as /devices/gpio_keys.83/input/input2
- <6>[ 3.351205] input: s2w_pwrkey as /devices/virtual/input/input3
- <6>[ 3.351224] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.351477] [sweep2wake]: sweep2wake_init done
- <6>[ 3.351510] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <6>[ 3.351618] qcom,qpnp-rtc qpnp-rtc-ee24e600: setting system clock to 1970-04-09 06:52:54 UTC (8491974)
- <6>[ 3.351686] msm_thermal:interrupt_mode_init Interrupt mode init
- <6>[ 3.352361] clock_late_init: Removing enables held for handed-off clocks
- <6>[ 3.356217] ALSA device list:
- <6>[ 3.356255] No soundcards found.
- <4>[ 3.356332] Warning: unable to open an initial console.
- <6>[ 3.356424] Freeing init memory: 56K
- <3>[ 3.357247] trampoline: Running trampoline v16
- <3>[ 3.357786] trampoline: Initializing devices...
- <6>[ 3.381209] mmc0: BKOPS_EN bit = 0
- <6>[ 3.410892] mmc0: new HS400 MMC card at address 0001
- <6>[ 3.412330] mmcblk0: mmc0:0001 064GE2 58.2 GiB
- <6>[ 3.413362] mmcblk0rpmb: mmc0:0001 064GE2 partition 3 4.00 MiB
- <4>[ 3.415802] Alternate GPT is invalid, using primary GPT.
- <6>[ 3.416489] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
- <6>[ 3.428377] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- <6>[ 3.429572] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- <6>[ 3.462580] msm-dwc3 msm_dwc3: DWC3 in low power mode
- <3>[ 3.625786] trampoline: Done initializing
- <3>[ 3.625921] fw_mounter: Loading fstab "/mrom.fstab"...
- <6>[ 3.747911] EXT4-fs (mmcblk0p28): recovery complete
- <6>[ 3.749024] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: (null)
- <3>[ 3.753324] trampoline: Running multirom
- <3>[ 3.762795] multirom: Running MultiROM v31
- <6>[ 3.763629] multirom: Loading MultiROM status...
- <3>[ 3.764101] multirom: Loading fstab "/mrom.fstab"...
- <6>[ 3.768922] multirom: Adding ROM sailfishos-bacon-release-1
- <6>[ 3.773257] multirom: Adding ROM Internal
- <6>[ 3.779514] multirom: Dumping multirom status:
- <6>[ 3.779884] multirom: is_second_boot=0
- <6>[ 3.780092] multirom: current_rom=Internal
- <6>[ 3.780301] multirom: colors_v2=0
- <6>[ 3.780659] multirom: brightness=40
- <6>[ 3.780863] multirom: enable_adb=0
- <6>[ 3.781067] multirom: rotation=0
- <6>[ 3.781273] multirom: force_generic_fb=0
- <6>[ 3.781676] multirom: anim_duration_coef=1.000000
- <6>[ 3.781885] multirom: hide_internal=0
- <6>[ 3.782237] multirom: int_display_name=Internal
- <6>[ 3.782444] multirom: auto_boot_seconds=5
- <6>[ 3.782650] multirom: auto_boot_rom=Internal
- <6>[ 3.783007] multirom: auto_boot_type=0
- <6>[ 3.783212] multirom: curr_rom_part=NULL
- <6>[ 3.783411] multirom:
- <6>[ 3.783761] multirom: ROM: Internal
- <6>[ 3.783967] multirom: base_path: /realdata/media/0/multirom/roms/Internal
- <6>[ 3.784328] multirom: icon_path: /realdata/media/0/multirom/icons/romic_android.png
- <6>[ 3.784539] multirom: type: 0
- <6>[ 3.784893] multirom: has_bootimg: 0
- <6>[ 3.785100] multirom: ROM: sailfishos-bacon-release-1
- <6>[ 3.785310] multirom: base_path: /realdata/media/0/multirom/roms/sailfishos-bacon-release-1
- <6>[ 3.785673] multirom: icon_path: /realdata/media/0/multirom/icons/romic_default.png
- <6>[ 3.786031] multirom: type: 4
- <6>[ 3.786234] multirom: has_bootimg: 1
- <3>[ 3.786845] multirom: /proc/config.gz is not available!
- <6>[ 3.787589] multirom: Left Split=0
- <6>[ 3.787643] multirom: Right Split=0
- <6>[ 3.796946] multirom: Framebuffer implementation: Qualcomm ION overlay
- <6>[ 3.831569] multirom: Using universal theme (-1)
- <3>[ 3.886326] lm3630_bank_a_update_status set brightness : 40
- <6>[ 4.002077] multirom: Dumping multirom status:
- <6>[ 4.002135] multirom: is_second_boot=0
- <6>[ 4.002218] multirom: current_rom=Internal
- <6>[ 4.002279] multirom: colors_v2=0
- <6>[ 4.002362] multirom: brightness=40
- <6>[ 4.002410] multirom: enable_adb=0
- <6>[ 4.002459] multirom: rotation=0
- <6>[ 4.002507] multirom: force_generic_fb=0
- <6>[ 4.002595] multirom: anim_duration_coef=1.000000
- <6>[ 4.002644] multirom: hide_internal=0
- <6>[ 4.002724] multirom: int_display_name=Internal
- <6>[ 4.002772] multirom: auto_boot_seconds=5
- <6>[ 4.002821] multirom: auto_boot_rom=Internal
- <6>[ 4.002903] multirom: auto_boot_type=0
- <6>[ 4.002951] multirom: curr_rom_part=NULL
- <6>[ 4.002998] multirom:
- <6>[ 4.003079] multirom: ROM: Internal
- <6>[ 4.003128] multirom: base_path: /realdata/media/0/multirom/roms/Internal
- <6>[ 4.003211] multirom: icon_path: /realdata/media/0/multirom/icons/romic_android.png
- <6>[ 4.003261] multirom: type: 0
- <6>[ 4.003342] multirom: has_bootimg: 0
- <6>[ 4.003389] multirom: ROM: sailfishos-bacon-release-1
- <6>[ 4.003439] multirom: base_path: /realdata/media/0/multirom/roms/sailfishos-bacon-release-1
- <6>[ 4.003522] multirom: icon_path: /realdata/media/0/multirom/icons/romic_default.png
- <6>[ 4.003605] multirom: type: 4
- <6>[ 4.003653] multirom: has_bootimg: 1
- <3>[ 8.653958] multirom: No run-on-boot scripts for ROM sailfishos-bacon-release-1
- <3>[ 8.739809] multirom: Parsing /realdata/media/0/multirom/roms/sailfishos-bacon-release-1/rom_info.txt...
- <3>[ 8.740321] multirom: Replacing aliases in root paths...
- <3>[ 8.740378] multirom: Alias-replaced path: /media/0/multirom/roms/sailfishos-bacon-release-1
- <3>[ 8.740471] multirom: Replacing aliases in the cmdline...
- <3>[ 8.740982] multirom: Alias-replaced cmdline: androidboot.emmc=true androidboot.serialno=8560c2de console=ttyHSL0,115200,n8 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 ddr_manufacture_info=Elpida LCD_id<4 oppo.rf_version=66 maxcpus=4 androidboot.startupmode=pwrkey androidboot.mode=kernel lk_version=V1.0 androidboot.hardware=bacon user_debug=31 msm_watchdog_v2.enable=1 selinux=0
- <3>[ 8.741156] multirom: Alias-replaced cmdline: data_subdir=/media/0/multirom/roms/sailfishos-bacon-release-1/data
- <6>[ 8.741343] multirom: Loading kexec:
- <6>[ 8.741395] multirom: /realdata/media/0/multirom/kexec
- <6>[ 8.741485] multirom: --mem-min=0x20000000
- <6>[ 8.741535] multirom: --load-hardboot
- <6>[ 8.741622] multirom: /realdata//media/0/multirom/roms/sailfishos-bacon-release-1//zImage
- <6>[ 8.741675] multirom: --initrd=/realdata//media/0/multirom/roms/sailfishos-bacon-release-1//initrd.img
- <6>[ 8.741767] multirom: --command-line=androidboot.emmc=true androidboot.serialno=8560c2de console=ttyHSL0,115200,n8 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 ddr_manufacture_info=Elpida LCD_id<4 oppo.rf_version=66 maxcpus=4 androidboot.startupmode=pwrkey androidboot.mode=kernel lk_version=V1.0 androidboot.hardware=bacon user_debug=31 msm_watchdog_v2.enable=1 selinux=0 data_subdir=/media/0/multirom/roms/sailfishos-bacon-release-1/data
- <6>[ 8.741973] multirom: --dtb
- <3>[ 8.800901] multirom: kexec call failed, re-running it to get info:
- <3>[ 8.836903] multirom: kernel: 0xb5e00000 kernel_size: 4d0cc0
- <3>[ 8.836962] multirom: DTB: Failed to load dtb appended to zImage, invalid offset!Cannot load /realdata//media/0/multirom/roms/sailfishos-bacon-release-1//zImage
- <6>[ 9.093708] mdss_dsi_update_gamma_index: update gamma index=0
- <6>[ 9.101000] mdss_dsi_update_color_enhance: enabled = 0
- <6>[ 9.104388] mdss_dsi_update_cabc_level: update cabc level=0 (0) sre=0 (0)
- <3>[ 9.148596] lm3630_bank_a_update_status set brightness : 40
- <6>[ 9.150511] multirom: Left Split=0
- <6>[ 9.150567] multirom: Right Split=0
- <6>[ 9.159810] multirom: Framebuffer implementation: Qualcomm ION overlay
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement