API tools faq
paste
Advertisement
Guest User

gtv.UART-normal

a guest
Dec 9th, 2011
345
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.77 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Successful patch applied!
  3. SEC FW: SEC ready
  4. SEC FW: firmware module sent to SEC for authentication and load
  5. Successful firmware download!
  6. SEC FW: firmware version valid: 2.1.0.6.
  7.  
  8. Verify stage2 PASS
  9. Intel(R) Consumer Electronics Firmware Development Kit (Intel(R) CEFDK)
  10. Copyright (C) 1999-2010 Intel Corporation. All rights reserved.
  11. Build Time (06/11/10 16:00:37).
  12. Loading 8051 MicroCode at 0x80000
  13. SATA 0: BTVSSD01 - 8G
  14. SATA 1: SONYBDP-410 - 0G
  15.  
  16. NBL BTV-EC 5.7.1 (base: 5.0-BTV_20100707) <built 11:14:57, 07/30/10 JST>
  17. Machine: EAGLE (i386/sodaville/btv)
  18. RAM: 0x00100000-0x02000000 available
  19. hda: BTVSSD01
  20. (C/H/S = 30720/16/32, Total 15728640 sectors)
  21. TRF file is loaded : start = 0x00100000, length = 0x0000ab14
  22. nup = 0x00100000
  23. TRF file is loaded : start = 0x00100000, length = 0x00532000
  24. [ 0.000000] Initializing cgroup subsys cpu
  25. [ 0.000000] Linux version 2.6.35.14-g5d41dd7 (root@BTV2G-Slave7) (gcc version 4.5.3 (gtv 20110802-49da4fe) ) #1 SMP PREEMPT Fri Oct 7 10:07:26 JST 2011
  26. [ 0.000000] Incorrect e801 memory size 0x00100000, using 768 MB
  27. [ 0.000000] BIOS-provided physical RAM map:
  28. [ 0.000000] BIOS-e801: 0000000000000000 - 0000000000010000 (usable)
  29. [ 0.000000] BIOS-e801: 0000000000100000 - 0000000030000000 (usable)
  30. [ 0.000000] BIOS-e801: 0000000000010000 - 0000000000018000 (ACPI data)
  31. [ 0.000000] BIOS-e801: 0000000000018000 - 0000000000030000 (usable)
  32. [ 0.000000] BIOS-e801: 0000000000030000 - 0000000000050000 (reserved)
  33. [ 0.000000] BIOS-e801: 0000000000050000 - 0000000000060000 (usable)
  34. [ 0.000000] BIOS-e801: 0000000000060000 - 0000000000061000 (reserved)
  35. [ 0.000000] BIOS-e801: 0000000000061000 - 000000000009f000 (usable)
  36. [ 0.000000] NX (Execute Disable) protection: active
  37. [ 0.000000] user-defined physical RAM map:
  38. [ 0.000000] user: 0000000000000000 - 0000000000010000 (usable)
  39. [ 0.000000] user: 0000000000100000 - 0000000024800000 (usable)
  40. [ 0.000000] last_pfn = 0x24800 max_arch_pfn = 0x1000000
  41. [ 0.000000] init_memory_mapping: 0000000000000000-0000000024800000
  42. [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219)
  43. [ 0.000000] 584MB LOWMEM available.
  44. [ 0.000000] mapped low ram: 0 - 24800000
  45. [ 0.000000] low ram: 0 - 24800000
  46. [ 0.000000] node 0 low ram: 00000000 - 24800000
  47. [ 0.000000] node 0 bootmap 00007000 - 0000b900
  48. [ 0.000000] (6/32 early reservations) ==> bootmem [0000000000 - 0024800000]
  49. [ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  50. [ 0.000000] #1 [0000100000 - 00007185c4] TEXT DATA BSS ==> [0000100000 - 00007185c4]
  51. [ 0.000000] #2 [0000719000 - 0000720000] BRK ==> [0000719000 - 0000720000]
  52. [ 0.000000] #3 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
  53. [ 0.000000] #4 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
  54. [ 0.000000] #5 [0000007000 - 000000c000] BOOTMAP ==> [0000007000 - 000000c000]
  55. [ 0.000000] Zone PFN ranges:
  56. [ 0.000000] DMA 0x00000001 -> 0x00001000
  57. [ 0.000000] Normal 0x00001000 -> 0x00024800
  58. [ 0.000000] Movable zone start PFN for each node
  59. [ 0.000000] early_node_map[2] active PFN ranges
  60. [ 0.000000] 0: 0x00000001 -> 0x00000010
  61. [ 0.000000] 0: 0x00000100 -> 0x00024800
  62. [ 0.000000] Using APIC driver default
  63. [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
  64. [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
  65. [ 0.000000] APIC: disable apic facility
  66. [ 0.000000] APIC: switched to apic NOOP
  67. [ 0.000000] Allocating PCI resources starting at 24800000 (gap: 24800000:db800000)
  68. [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
  69. [ 0.000000] PERCPU: Embedded 12 pages/cpu @81600000 s28160 r0 d20992 u2097152
  70. [ 0.000000] pcpu-alloc: s28160 r0 d20992 u2097152 alloc=1*2097152
  71. [ 0.000000] pcpu-alloc: [0] 0
  72. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 148095
  73. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 memmap=exactmap memmap=64k@0 memmap=583M@1M bootmode=disk ro androidboot.hardware=eagle pwrctl_type=uart init=/init inithash=9e049df04aa3a6f31c1ebe34e6891f4f2cc230b3
  74. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  77. [ 0.000000] Enabling fast FPU save and restore... done.
  78. [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
  79. [ 0.000000] Initializing CPU#0
  80. [ 0.000000] Memory: 585224k/598016k available (3750k kernel code, 11828k reserved, 1300k data, 252k init, 0k highmem)
  81. [ 0.000000] virtual kernel memory layout:
  82. [ 0.000000] fixmap : 0xfff90000 - 0xfffff000 ( 444 kB)
  83. [ 0.000000] vmalloc : 0xa5000000 - 0xfff8e000 (1455 MB)
  84. [ 0.000000] lowmem : 0x80000000 - 0xa4800000 ( 584 MB)
  85. [ 0.000000] .init : 0x805ef000 - 0x8062e000 ( 252 kB)
  86. [ 0.000000] .data : 0x804a99ee - 0x805eea08 (1300 kB)
  87. [ 0.000000] .text : 0x80100000 - 0x804a99ee (3750 kB)
  88. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  89. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  90. [ 0.000000] Hierarchical RCU implementation.
  91. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  92. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  93. [ 0.000000] NR_IRQS:320
  94. [ 0.000000] console [ttyS0] enabled
  95. [ 0.000000] Fast TSC calibration using PIT
  96. [ 0.000000] Detected 1600.203 MHz processor.
  97. [ 0.012007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.40 BogoMIPS (lpj=6400812)
  98. [ 0.020007] pid_max: default: 32768 minimum: 301
  99. [ 0.024033] Security Framework initialized
  100. [ 0.028009] Guardian: Initializing.
  101. [ 0.032042] Mount-cache hash table entries: 512
  102. [ 0.036199] Initializing cgroup subsys cpuacct
  103. [ 0.040039] mce: CPU supports 5 MCE banks
  104. [ 0.044018] using mwait in idle threads.
  105. [ 0.048018] Performance Events: PEBS fmt0+, Atom events,
  106. [ 0.054167] no APIC, boot with the "lapic" boot parameter to force-enable it.
  107. [ 0.056007] no hardware sampling interrupt available.
  108. [ 0.060007] Intel PMU driver.
  109. [ 0.062948] ... version: 3
  110. [ 0.064007] ... bit width: 40
  111. [ 0.068008] ... generic registers: 2
  112. [ 0.072008] ... value mask: 000000ffffffffff
  113. [ 0.076008] ... max period: 000000007fffffff
  114. [ 0.080008] ... fixed-purpose events: 3
  115. [ 0.084009] ... event mask: 0000000700000003
  116. [ 0.088417] SMP alternatives: switching to UP code
  117. [ 0.096328] Freeing SMP alternatives: 16k freed
  118. [ 0.100141] weird, boot CPU (#0) not listed by the BIOS.
  119. [ 0.104016] SMP motherboard not detected.
  120. [ 0.108012] Local APIC not detected. Using dummy APIC emulation.
  121. [ 0.112010] SMP disabled
  122. [ 0.120017] Brought up 1 CPUs
  123. [ 0.122966] Total of 1 processors activated (3200.40 BogoMIPS).
  124. [ 0.128601] NET: Registered protocol family 16
  125. [ 0.132192] PCI: Using configuration type 1 for base access
  126. [ 0.141209] bio: create slab <bio-0> at 0
  127. [ 0.148035] ACPI: Interpreter disabled.
  128. [ 0.152083] SCSI subsystem initialized
  129. [ 0.155906] usbcore: registered new interface driver usbfs
  130. [ 0.156064] usbcore: registered new interface driver hub
  131. [ 0.160066] usbcore: registered new device driver usb
  132. [ 0.164102] Advanced Linux Sound Architecture Driver Version 1.0.23.
  133. [ 0.168016] PCI: Probing PCI hardware
  134. [ 0.173911] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  135. [ 0.178403] Switching to clocksource tsc
  136. [ 0.180114] pnp: PnP ACPI: disabled
  137. [ 0.183994] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  138. [ 0.189209] pci 0000:00:01.0: bridge window [io disabled]
  139. [ 0.194857] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff]
  140. [ 0.201630] pci 0000:00:01.0: bridge window [mem pref disabled]
  141. [ 0.207791] NET: Registered protocol family 2
  142. [ 0.212204] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  143. [ 0.219585] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  144. [ 0.228222] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  145. [ 0.235530] TCP: Hash tables configured (established 131072 bind 65536)
  146. [ 0.242153] TCP reno registered
  147. [ 0.245302] UDP hash table entries: 512 (order: 2, 16384 bytes)
  148. [ 0.251230] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  149. [ 0.257765] NET: Registered protocol family 1
  150. [ 0.264734] RPC: Registered udp transport module.
  151. [ 0.269431] RPC: Registered tcp transport module.
  152. [ 0.274120] RPC: Registered tcp NFSv4.1 backchannel transport module.
  153. [ 0.284988] platform rtc_cmos: registered platform RTC device (no PNP device found)
  154. [ 0.295883] ashmem: initialized
  155. [ 0.300955] Slow work thread pool: Starting up
  156. [ 0.305455] Slow work thread pool: Ready
  157. [ 0.309368] fuse init (API version 7.14)
  158. [ 0.313365] msgmni has been set to 1143
  159. [ 0.317779] io scheduler noop registered
  160. [ 0.321702] io scheduler deadline registered
  161. [ 0.325970] io scheduler cfq registered (default)
  162. [ 0.330998] [drm] Initialized drm 1.1.0 20060810
  163. [ 0.335612] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
  164. [ 0.341927] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a XScale
  165. [ 0.347962] serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a XScale
  166. [ 0.354037] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a XScale
  167. [ 0.360271] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 4) is a XScale
  168. [ 0.366775] brd: module loaded
  169. [ 0.370744] loop: module loaded
  170. [ 0.374123] ahci: SSS flag set, parallel bus scan disabled
  171. [ 0.379629] ahci 0000:01:0e.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  172. [ 0.387705] ahci 0000:01:0e.0: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part
  173. [ 0.396831] scsi0 : ahci
  174. [ 0.399534] scsi1 : ahci
  175. [ 0.402234] ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 4
  176. [ 0.410311] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 4
  177. [ 0.418445] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  178. [ 0.425476] e1000: Copyright (c) 1999-2006 Intel Corporation.
  179. [ 0.486749] e1000 0000:01:0c.0: eth0: (PCI:33MHz:32-bit) 54:42:49:d3:d6:e5
  180. [ 0.493623] e1000 0000:01:0c.0: eth0: Intel(R) PRO/1000 Network Connection
  181. [ 0.500549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  182. [ 0.507120] ehci_hcd 0000:01:0d.0: EHCI Host Controller
  183. [ 0.512397] ehci_hcd 0000:01:0d.0: new USB bus registered, assigned bus number 1
  184. [ 0.540661] ehci_hcd 0000:01:0d.0: irq 4, io mem 0xdf810100
  185. [ 0.556636] ehci_hcd 0000:01:0d.0: USB 0.0 started, EHCI 1.00
  186. [ 0.562585] hub 1-0:1.0: USB hub found
  187. [ 0.566336] hub 1-0:1.0: 1 port detected
  188. [ 0.570414] ehci_hcd 0000:01:0d.1: EHCI Host Controller
  189. [ 0.575641] ehci_hcd 0000:01:0d.1: new USB bus registered, assigned bus number 2
  190. [ 0.604650] ehci_hcd 0000:01:0d.1: irq 4, io mem 0xdf820100
  191. [ 0.620631] ehci_hcd 0000:01:0d.1: USB 0.0 started, EHCI 1.00
  192. [ 0.626546] hub 2-0:1.0: USB hub found
  193. [ 0.630290] hub 2-0:1.0: 1 port detected
  194. [ 0.634361] Initializing USB Mass Storage driver...
  195. [ 0.639285] usbcore: registered new interface driver usb-storage
  196. [ 0.645278] USB Mass Storage support registered.
  197. [ 0.649953] mice: PS/2 mouse device common for all mice
  198. [ 0.655208] usbcore: registered new interface driver xpad
  199. [ 0.660594] xpad: X-Box pad driver
  200. [ 0.664215] using rtc device, rtc_cmos, for alarms
  201. [ 0.668824] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  202. [ 0.675351] rtc_cmos rtc_cmos: only 24-hr supported
  203. [ 0.680234] lost rtc device for alarms
  204. [ 0.683887] Linux video capture interface: v2.00
  205. [ 0.688801] usbcore: registered new interface driver uvcvideo
  206. [ 0.694533] USB Video Class driver (v0.1.0)
  207. [ 0.698707] cpuidle: using governor ladder
  208. [ 0.703035] usbcore: registered new interface driver hiddev
  209. [ 0.708647] usbcore: registered new interface driver usbhid
  210. [ 0.714217] usbhid: USB HID core driver
  211. [ 0.718148] logger: created 256K log 'log_main'
  212. [ 0.722704] logger: created 256K log 'log_events'
  213. [ 0.727429] logger: created 64K log 'log_radio'
  214. [ 0.731983] logger: created 64K log 'log_system'
  215. [ 0.736803] usbcore: registered new interface driver snd-usb-audio
  216. [ 0.742974] ALSA device list:
  217. [ 0.745934] No soundcards found.
  218. [ 0.749327] oprofile: using timer interrupt.
  219. [ 0.753605] nf_conntrack version 0.5.0 (9144 buckets, 36576 max)
  220. [ 0.759754] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  221. [ 0.767137] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  222. [ 0.775031] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  223. [ 0.781372] ip_tables: (C) 2000-2006 Netfilter Core Team
  224. [ 0.786719] TCP cubic registered
  225. [ 0.789979] NET: Registered protocol family 10
  226. [ 0.794819] IPv6 over IPv4 tunneling driver
  227. [ 0.799494] NET: Registered protocol family 17
  228. [ 0.803949] Using IPI No-Shortcut mode
  229. [ 0.808152] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  230. [ 0.928615] usb 1-1: new high speed USB device using ehci_hcd and address 2
  231. [ 1.065305] hub 1-1:1.0: USB hub found
  232. [ 1.069110] hub 1-1:1.0: 4 ports detected
  233. [ 1.184614] usb 2-1: new high speed USB device using ehci_hcd and address 2
  234. [ 1.321283] hub 2-1:1.0: USB hub found
  235. [ 1.325094] hub 2-1:1.0: 4 ports detected
  236. [ 1.400586] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  237. [ 1.406846] ata1.00: ATA-7: BTVSSD01, rs2.a000, max UDMA/133
  238. [ 1.412497] ata1.00: 15728640 sectors, multi 0: LBA48
  239. [ 1.417787] ata1.00: configured for UDMA/133
  240. [ 1.452825] scsi 0:0:0:0: Direct-Access ATA BTVSSD01 rs2. PQ: 0 ANSI: 5
  241. [ 1.461214] sd 0:0:0:0: Attached scsi generic sg0 type 0
  242. [ 1.466628] sd 0:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
  243. [ 1.474386] sd 0:0:0:0: [sda] Write Protect is off
  244. [ 1.479236] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  245. [ 1.488824] sda: sda1 sda3 < sda5 sda6 sda7 >
  246. [ 1.504081] sd 0:0:0:0: [sda] Attached SCSI disk
  247. [ 1.620711] usb 2-1.4: new high speed USB device using ehci_hcd and address 3
  248. [ 2.376517] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  249. [ 2.383515] ata2.00: ATAPI: SONY BDP-410, 1.02, max UDMA/100
  250. [ 2.390776] ata2.00: configured for UDMA/100
  251. [ 2.429166] scsi 1:0:0:0: CD-ROM SONY BPD-410 1.02 PQ: 0 ANSI: 5
  252. [ 2.440457] sr0: scsi3-mmc drive: 0x/12x cd/rw xa/form2 cdda tray
  253. [ 2.446545] Uniform CD-ROM driver Revision: 3.20
  254. [ 2.451406] sr 1:0:0:0: Attached scsi generic sg1 type 5
  255. [ 2.460021] EXT3-fs: barriers not enabled
  256. [ 2.467108] EXT3-fs (sda1): mounted filesystem with writeback data mode
  257. [ 2.473805] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
  258. [ 2.480437] Freeing unused kernel memory: 252k freed
  259. [ 2.485698] kjournald starting. Commit interval 5 seconds
  260. Error opening /proc/platform_config
  261. Please ensure that:
  262. -The platform_config driver is properly loaded
  263. e2fsck 1.41.9 (22-Aug-2009)
  264. Superblock last write time (Sat Jan 8 05:08:06 1966,
  265. now = Mon Sep 8 20:08:06 1975) is in the future.
  266. Fix? yes
  267.  
  268. /dev/block/sda5 has gone 3530 days without being checked, check forced.
  269. Pass 1: Checking inodes, blocks, and sizes
  270. Pass 2: Checking directory structure
  271. Pass 3: Checking directory connectivity
  272. Pass 4: Checking reference counts
  273. Pass 5: Checking group summary information
  274.  
  275. /dev/block/sda5: ***** FILE SYSTEM WAS MODIFIED *****
  276. /dev/block/sda5: 1523/91584 files (0.6% non-contiguous), 112734/366268 blocks
  277. e2fsck 1.41.9 (22-Aug-2009)
  278. /dev/block/sda6: recovering journal
  279. Superblock last mount time (Sat Jan 8 05:08:15 1966,
  280. now = Mon Sep 8 20:08:09 1975) is in the future.
  281. Fix? yes
  282.  
  283. /dev/block/sda6 has gone 3530 days without being checked, check forced.
  284. Pass 1: Checking inodes, blocks, and sizes
  285. Pass 2: Checking directory structure
  286. Pass 3: Checking directory connectivity
  287. Pass 4: Checking reference counts
  288. Pass 5: Checking group summary information
  289.  
  290. /dev/block/sda6: ***** FILE SYSTEM WAS MODIFIED *****
  291. /dev/block/sda6: 17/91584 files (0.0% non-contiguous), 79346/366268 blocks
  292. /sbin/check_e2fs: Filesystem errors on /dev/block/sda6 were corrected
  293. e2fsck 1.41.9 (22-Aug-2009)
  294. /dev/block/sda7: recovering journal
  295. Superblock last mount time (Sat Jan 8 05:08:15 1966,
  296. now = Mon Sep 8 20:08:10 1975) is in the future.
  297. Fix? yes
  298.  
  299. /dev/block/sda7 has gone 3530 days without being checked, check forced.
  300. Pass 1: Checking inodes, blocks, and sizes
  301. Pass 2: Checking directory structure
  302. Pass 3: Checking directory connectivity
  303. Pass 4: Checking reference counts
  304. Pass 5: Checking group summary information
  305.  
  306. /dev/block/sda7: ***** FILE SYSTEM WAS MODIFIED *****
  307. /dev/block/sda7: 1525/277984 files (4.8% non-contiguous), 83547/1111420 blocks
  308. /sbin/check_e2fs: Filesystem errors on /dev/block/sda7 were corrected
  309. Minimum date: 2010-10-14 02:00:00
  310. Current date: 1975-09-08 15:08:15
  311. Maximum date: 2030-10-09 02:00:00
  312. Default date: 2010-10-15 02:00:00
  313. Current time is less than minimum; setting to default.
  314. /* LOAD "/etc/platform_config/ce4100/memory_layout_1G_pmr.hcfg" to (new) database location "platform.memory.layout"*/
  315. /* EXECUTE config database location "platform.startup"*/
  316. shifting platform_config media_base_address 584 MB ( 0x24800000 )
  317. Created PMRs from memory layout.
  318. [map( 0xdfb00000, 0x0007a000 ) = 0x6efc4000]
  319. fuse config=0x81483735
  320. SEC FW Loading is enabled
  321. sec_fw_load: loading /lib/firmware/sec/sec_fw_3001_42.ce4100: ok
  322. flash_aacs_read_key_blob, 9632
  323. AACS is initialized
  324. [map( 0xdf950000, 0x00010000 ) = 0x6e7b7000]
  325. [map( 0xdf950000, 0x00007000 ) = 0x6e7b0000]
  326. ERROR: Failed trying to read from platform config file. Using default value:1 Path:platform.software.drivers.avcap.hdcp.hp_on_bch_failure ret:2
  327. VCAP1 value is: 3F703E8 now
  328. VCAP2 value is: 1160096 now
  329. VDC1 value is: 13BE3 now
  330. VDC2 value is: 13BE3 now
  331. mcu_config <0> <2> <-1> <-1>
  332. e2fsck 1.41.9 (22-Aug-2009)
  333. /dev/spectra1: recovering journal
  334. /dev/spectra1: clean, 28/7840 files, 2092/15664 blocks
  335. start mounting vfs/ps
  336. e2fsck 1.41.9 (22-Aug-2009)
  337. /dev/block/loop1: recovering journal
  338. /dev/block/loop1: clean, 14/131072 files, 17208/524286 blocks
  339. success. (mount /data/data/com.sony.btv.discplayer/cache/buda.img to /data/vfs/buda)
  340. csven: not found
  341. csven: not found
  342. tar: /tmp/intel_sven_startup.log: Cannot stat: No such file or directory
  343. tar: Error exit delayed from previous errors.
  344. rm failed for /tmp/intel_sven_startup.log, No such file or directory
  345.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!