Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl -x /dev/sda
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD1003FBYZ-010FB0
- Serial Number: WD-WCAW37370083
- LU WWN Device Id: 5 0014ee 209def52d
- Firmware Version: 01.01V03
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sun Aug 31 14:59:11 2014 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (16860) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 166) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 2
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 098 098 000 - 2137
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 2
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
- 193 Load_Cycle_Count -O--CK 200 200 000 - 9
- 194 Temperature_Celsius -O---K 114 109 000 - 33
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- GP Log at address 0x08 has 2 sectors [Power Conditions]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 24 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 2108 -
- # 2 Short offline Completed without error 00% 2056 -
- # 3 Extended offline Aborted by host 90% 2056 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 33 Celsius
- Power Cycle Min/Max Temperature: 26/38 Celsius
- Lifetime Min/Max Temperature: 0/38 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (74)
- Index Estimated Time Temperature Celsius
- 75 2014-08-31 07:02 33 **************
- ... ..( 48 skipped). .. **************
- 124 2014-08-31 07:51 33 **************
- 125 2014-08-31 07:52 36 *****************
- ... ..(140 skipped). .. *****************
- 266 2014-08-31 10:13 36 *****************
- 267 2014-08-31 10:14 35 ****************
- ... ..( 2 skipped). .. ****************
- 270 2014-08-31 10:17 35 ****************
- 271 2014-08-31 10:18 34 ***************
- ... ..( 15 skipped). .. ***************
- 287 2014-08-31 10:34 34 ***************
- 288 2014-08-31 10:35 33 **************
- ... ..( 58 skipped). .. **************
- 347 2014-08-31 11:34 33 **************
- 348 2014-08-31 11:35 34 ***************
- ... ..( 3 skipped). .. ***************
- 352 2014-08-31 11:39 34 ***************
- 353 2014-08-31 11:40 33 **************
- ... ..( 25 skipped). .. **************
- 379 2014-08-31 12:06 33 **************
- 380 2014-08-31 12:07 34 ***************
- ... ..( 2 skipped). .. ***************
- 383 2014-08-31 12:10 34 ***************
- 384 2014-08-31 12:11 35 ****************
- ... ..( 36 skipped). .. ****************
- 421 2014-08-31 12:48 35 ****************
- 422 2014-08-31 12:49 34 ***************
- ... ..( 19 skipped). .. ***************
- 442 2014-08-31 13:09 34 ***************
- 443 2014-08-31 13:10 33 **************
- ... ..( 30 skipped). .. **************
- 474 2014-08-31 13:41 33 **************
- 475 2014-08-31 13:42 34 ***************
- ... ..( 5 skipped). .. ***************
- 3 2014-08-31 13:48 34 ***************
- 4 2014-08-31 13:49 35 ****************
- ... ..( 26 skipped). .. ****************
- 31 2014-08-31 14:16 35 ****************
- 32 2014-08-31 14:17 34 ***************
- ... ..( 16 skipped). .. ***************
- 49 2014-08-31 14:34 34 ***************
- 50 2014-08-31 14:35 33 **************
- ... ..( 23 skipped). .. **************
- 74 2014-08-31 14:59 33 **************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 66 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 46 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 7695184 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement