API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 23rd, 2019
106
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 60.93 KB | None | 0 0
raw download clone embed print report
  1. [0000.165] [TegraBoot] (version 00.00.2018.01-l4t-24abfa75)
  2. [0000.170] Processing in cold boot mode Bootloader 2
  3. [0000.175] A02 Bootrom Patch rev = 1023
  4. [0000.178] Power-up reason: ap watchdog timeout
  5. [0000.182] No Battery Present
  6. [0000.185] pmic max77620 reset reason
  7. [0000.189] pmic max77620 NVERC : 0x0
  8. [0000.192] RamCode = 0
  9. [0000.195] Platform has DDR4 type RAM
  10. [0000.198] max77620 disabling SD1 Remote Sense
  11. [0000.202] Setting DDR voltage to 1125mv
  12. [0000.206] Serial Number of Pmic Max77663: 0x1b01a2
  13. [0000.214] Entering ramdump check
  14. [0000.217] Get RamDumpCarveOut = 0x0
  15. [0000.220] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
  16. [0000.226] Last reboot was clean, booting normally!
  17. [0000.230] Sdram initialization is successful
  18. [0000.234] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
  19. [0000.241] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
  20. [0000.247] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
  21. [0000.253] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
  22. [0000.259] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
  23. [0000.265] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
  24. [0000.271] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
  25. [0000.277] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
  26. [0000.297] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
  27. [0000.303] Platform-DebugCarveout: 0
  28. [0000.307] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
  29. [0000.313] Non secure mode, and RB not enabled.
  30. [0000.444] Csd NumOfBlocks=62333952
  31. [0000.462] Using GPT Primary to query partitions
  32. [0000.470] Loading Tboot-CPU binary
  33. [0000.847] Verifying TBC in OdmNonSecureSBK mode
  34. [0000.858] Bootloader load address is 0xa0000000, entry address is 0xa0000258
  35. [0000.865] Bootloader downloaded successfully.
  36. [0000.869] Downloaded Tboot-CPU binary to 0xa0000258
  37. [0000.875] MAX77620_GPIO5 configured
  38. [0000.878] CPU power rail is up
  39. [0000.881] CPU clock enabled
  40. [0000.886] Performing RAM repair
  41. [0000.889] Updating A64 Warmreset Address to 0xa00002e9
  42. [0000.894] Loading NvTbootBootloaderDTB
  43. [0002.205] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode
  44. [0002.301] Bootloader DTB Load Address: 0x83000000
  45. [0002.306] Loading NvTbootKernelDTB
  46. [0003.617] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode
  47. [0003.712] Kernel DTB Load Address: 0x83100000
  48. [0003.723] Loading cboot binary
  49. [0005.404] Verifying EBT in OdmNonSecureSBK mode
  50. [0005.454] Bootloader load address is 0x92c00000, entry address is 0x92c00258
  51. [0005.461] Bootloader downloaded successfully.
  52. [0005.655] Using BFS PT to query partitions
  53. [0005.659] Error in NvTbootLoadBinary: 0x1 !
  54. [0005.663] Next binary entry address: 0x92c00258
  55. [0005.668] BoardId: 3448
  56. [0005.675] Overriding pmu board id with proc board id
  57. [0005.680] Display board id is not available
  58. [0007.178] Verifying SC7EntryFw in OdmNonSecureSBK mode
  59. [0007.247] /bpmp deleted
  60. [0007.250] SC7EntryFw header found loaded at 0xff700000
  61. [0007.493] OVR2 PMIC
  62. [0007.495] Bpmp FW successfully loaded
  63. [0007.513] WB0 init successfully at 0xff780000
  64. [0007.518] Set NvDecSticky Bits
  65. [0007.522] GSC2 address ff53fffc value c0edbbcc
  66. [0007.530] GSC MC Settings done
  67. [0007.538] TOS Image length 53680
  68. [0007.541] Monitor size 53680
  69. [0007.544] OS size 0
  70. [0007.707] Secure Os AES-CMAC Verification Success!
  71. [0007.712] TOS image cipher info: plaintext
  72. [0007.716] Loading and Validation of Secure OS Successful
  73. [0007.740] SC7 Entry Firmware - 0xff700000, 0x4000
  74. [0007.745] NvTbootPackSdramParams: start.
  75. [0007.751] NvTbootPackSdramParams: done.
  76. [0007.755] Tegraboot started after 92312 us
  77. [0007.759] Basic modules init took 5728712 us
  78. [0007.763] NvTbootQspiFlashIoctl: Opcode = 1 not supported
  79. [0007.769] Sec Bootdevice Read Time = 622327755 ms, Read Size = 622327755 KB
  80. [0007.776] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB
  81. [0007.781] Storage Device Read Time = 6706 ms, Read Size = 2292 KB
  82. [0007.787] Storage Device Write Time = 0 ms, Write Size = 0 KB
  83. [0007.793] Next stage binary read took 1529647 us
  84. [0007.798] Carveout took -1543990 us
  85. [0007.801] CPU initialization took 2134763 us
  86. [0007.805] Total time taken by TegraBoot 7849132 us
  87.  
  88. [0007.810] Starting CPU & Halting co-processor
  89.  
  90. 64NOTICE: BL31: v1.3(release):eca0c5e
  91. NOTICE: BL31: Built : 00:21:27, Mar 13 2019
  92. ERROR: Error initializing runtime service trusty_fast
  93. [0007.932] RamCode = 0
  94. [0007.937] LPDDR4 Training: Read DT: Number of tables = 2
  95. [0007.942] EMC Training (SRC-freq: 204000; DST-freq: 1600000)
  96. [0007.955] EMC Training Successful
  97. [0007.958] 408000 not found in DVFS table
  98. [0007.965] RamCode = 0
  99. [0007.968] DT Write: emc-table@204000 succeeded
  100. [0007.974] DT Write: emc-table@1600000 succeeded
  101. [0007.978] LPDDR4 Training: Write DT: Number of tables = 2
  102. [0008.178]
  103. [0008.180] Debug Init done
  104. [0008.182] Marked DTB cacheable
  105. [0008.185] Bootloader DTB loaded at 0x83000000
  106. [0008.190] Marked DTB cacheable
  107. [0008.193] Kernel DTB loaded at 0x83100000
  108. [0008.197] DeviceTree Init done
  109. [0008.209] Pinmux applied successfully
  110. [0008.213] gicd_base: 0x50041000
  111. [0008.217] gicc_base: 0x50042000
  112. [0008.220] Interrupts Init done
  113. [0008.224] Using base:0x60005090 & irq:208 for tick-timer
  114. [0008.229] Using base:0x60005098 for delay-timer
  115. [0008.234] platform_init_timer: DONE
  116. [0008.237] Timer(tick) Init done
  117. [0008.241] osc freq = 38400 khz
  118. [0008.245]
  119. [0008.246] welcome to cboot
  120. [0008.249]
  121. [0008.250] Cboot Version: 00.00.2018.01-t210-f76b856b
  122. [0008.255] calling constructors
  123. [0008.258] initializing heap
  124. [0008.261] initializing threads
  125. [0008.264] initializing timers
  126. [0008.266] creating bootstrap completion thread
  127. [0008.271] top of bootstrap2()
  128. [0008.274] CPU: ARM Cortex A57
  129. [0008.277] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
  130. [0008.281] initializing platform
  131. [0008.284] Scratch reg 37 & 271 initial value set..
  132. [0008.291] cboot:secure-pmc present
  133. [0008.294] Manufacturer: MF = 0xc2, ID MSB = 0x25
  134. [0008.299] ID LSB = 0x36, ID-CFI len = 194 bytes
  135. [0008.303] Macronix QSPI chip present
  136. [0008.307] SPI device register
  137. [0008.310] init boot device
  138. [0008.312] allocating memory for boot device(SPI)
  139. [0008.317] registering boot device
  140. [0008.326] sdmmc node status = okay
  141. [0008.330] sdcard instance = 0
  142. [0008.333] sdcard gpio handle 0x5d
  143. [0008.336] sdcard gpio pin 0xc9
  144. [0008.339] sdcard gpio flags 0x0
  145. [0008.342] vmmc-supply 0x9d
  146. [0008.344] Instance: 0
  147. [0008.347] Allocating memory for context
  148. [0008.350] enabling clock
  149. [0008.353] sd card init
  150. [0008.355] Check card present and stable
  151. [0008.359] Send command 0
  152. [0008.383] Send command 3
  153. [0008.388] Set RCA for the card
  154. [0008.391] Query card specific data by command 9
  155. [0008.397] Parse CSD data
  156. [0008.400] Send command 7
  157. [0008.410] Calling sd device register
  158. [0008.414] Init sdcard
  159. [0008.416] Allocating memory for boot device
  160. [0008.420] Registering user device
  161. [0008.433] Enable APE clock
  162. [0008.436] Un-powergate APE partition
  163. [0008.439] of_register: registering tegra_udc to of_hal
  164. [0008.444] of_register: registering tegra_udc to of_hal
  165. [0008.449] of_register: registering inv20628-driver to of_hal
  166. [0008.455] of_register: registering ads1015-driver to of_hal
  167. [0008.461] of_register: registering lp8557-bl-driver to of_hal
  168. [0008.467] of_register: registering bq2419x_charger to of_hal
  169. [0008.472] of_register: registering cpc to of_hal
  170. [0008.477] of_register: registering bq27441_fuel_gauge to of_hal
  171. [0008.488] gpio framework initialized
  172. [0008.492] of_register: registering tca9539_gpio to of_hal
  173. [0008.497] of_register: registering tca9539_gpio to of_hal
  174. [0008.503] of_register: registering i2c_bus_driver to of_hal
  175. [0008.508] of_register: registering i2c_bus_driver to of_hal
  176. [0008.514] of_register: registering i2c_bus_driver to of_hal
  177. [0008.519] of_register: registering i2c_bus_driver to of_hal
  178. [0008.525] pmic framework initialized
  179. [0008.528] of_register: registering max77620_pmic to of_hal
  180. [0008.534] regulator framework initialized
  181. [0008.538] of_register: registering tps65132_bl_driver to of_hal
  182. [0008.544] initializing target
  183. [0008.550] gpio_driver_register: register 'tegra_gpio_driver' driver
  184. [0008.558] fixed regulator driver initialized
  185. [0008.576] initializing OF layer
  186. [0008.579] NCK carveout not present
  187. [0008.582] Skipping dts_overrides
  188. [0008.586] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  189. [0008.603] I2C Bus Init done
  190. [0008.605] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  191. [0008.615] I2C Bus Init done
  192. [0008.618] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  193. [0008.628] I2C Bus Init done
  194. [0008.631] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  195. [0008.641] I2C Bus Init done
  196. [0008.644] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  197. [0008.654] I2C Bus Init done
  198. [0008.657] of_children_init: Ops found for compatible string maxim,max77620
  199. [0008.667] max77620_init using irq 118
  200. [0008.672] register 'maxim,max77620' pmic
  201. [0008.677] gpio_driver_register: register 'max77620-gpio' driver
  202. [0008.683] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  203. [0008.693] I2C Bus Init done
  204. [0008.697] NCK carveout not present
  205. [0008.700] shim_invoke: No NCT, Calling dts updates
  206. [0008.711] Find /i2c@7000c000's alias i2c0
  207. [0008.715] get eeprom at 1-a0, size 256, type 0
  208. [0008.724] Find /i2c@7000c500's alias i2c2
  209. [0008.728] get eeprom at 3-a0, size 256, type 0
  210. [0008.732] get eeprom at 3-ae, size 256, type 0
  211. [0008.737] pm_ids_update: Updating 1,a0, size 256, type 0
  212. [0008.742] I2C slave not started
  213. [0008.745] I2C write failed
  214. [0008.748] Writing offset failed
  215. [0008.751] eeprom_init: EEPROM read failed
  216. [0008.755] pm_ids_update: eeprom init failed
  217. [0008.759] pm_ids_update: Updating 3,a0, size 256, type 0
  218. [0008.789] pm_ids_update: The pm board id is 3448-0000-200
  219. [0008.796] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
  220. [0008.804] pm_ids_update: pm id update successful
  221. [0008.808] pm_ids_update: Updating 3,ae, size 256, type 0
  222. [0008.838] pm_ids_update: The pm board id is 3449-0000-200
  223. [0008.845] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
  224. [0008.852] pm_ids_update: pm id update successful
  225. [0008.883] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  226. [0008.889] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
  227. [0008.897] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  228. [0008.902] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
  229. [0008.911] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e4:09:7a
  230. [0008.917] Plugin Manager: Parse ODM data 0x00094000
  231. [0008.928] shim_cmdline_install: /chosen/bootargs: androidboot.secureos=tlk earlycon=uart8250,mmio32,0x70006000
  232. [0008.944] Find /i2c@7000c000's alias i2c0
  233. [0008.948] get eeprom at 1-a0, size 256, type 0
  234. [0008.957] Find /i2c@7000c500's alias i2c2
  235. [0008.961] get eeprom at 3-a0, size 256, type 0
  236. [0008.965] get eeprom at 3-ae, size 256, type 0
  237. [0008.970] pm_ids_update: Updating 1,a0, size 256, type 0
  238. [0008.975] I2C slave not started
  239. [0008.978] I2C write failed
  240. [0008.981] Writing offset failed
  241. [0008.984] eeprom_init: EEPROM read failed
  242. [0008.988] pm_ids_update: eeprom init failed
  243. [0008.992] pm_ids_update: Updating 3,a0, size 256, type 0
  244. [0009.022] pm_ids_update: The pm board id is 3448-0000-200
  245. [0009.028] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
  246. [0009.035] pm_ids_update: pm id update successful
  247. [0009.040] pm_ids_update: Updating 3,ae, size 256, type 0
  248. [0009.070] pm_ids_update: The pm board id is 3449-0000-200
  249. [0009.076] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
  250. [0009.083] pm_ids_update: pm id update successful
  251. [0009.114] Chip UID is 000000016441078208000000050702c0
  252. [0009.119] Add serial number:04211190055890c00207 as DT property
  253. [0009.127] Applying platform configs
  254. [0009.134] platform-init is not present. Skipping
  255. [0009.138] calling apps_init()
  256. [0009.158] Found 19 GPT partitions in "sd0"
  257. [0009.162] Proceeding to Cold Boot
  258. [0009.166] starting app android_boot_app
  259. [0009.169] Device state: unlocked
  260. [0009.172] display console init
  261. [0009.181] could not find regulator
  262. [0009.184] hdmi cable connected
  263. [0009.200] edid read success
  264. [0009.215] edid read success
  265. [0009.220] width = 640, height = 480, frequency = 25174825
  266. [0009.226] width = 640, height = 480, frequency = 25174825
  267. [0009.231] width = 1920, height = 1080, frequency = 148500000
  268. [0009.237] width = 1024, height = 768, frequency = 65000000
  269. [0009.242] width = 1920, height = 1080, frequency = 148500000
  270. [0009.248] width = 1280, height = 720, frequency = 74175824
  271. [0009.254] width = 1920, height = 1080, frequency = 148351648
  272. [0009.259] width = 720, height = 480, frequency = 26973026
  273. [0009.265] width = 720, height = 480, frequency = 26973026
  274. [0009.270] width = 640, height = 480, frequency = 25174825
  275. [0009.275] width = 1920, height = 1080, frequency = 74175824
  276. [0009.281] Best mode Width = 1920, Height = 1080, freq = 148351648
  277. [0009.289] tmds-config node not found
  278. [0009.293] pmc_set_io_pad_voltage: Error -2 retrieving platform-io-pad-voltagepropsetting 'avdd-io-hdmi-dp' regulator to 1050000 micro volts
  279. [0009.308] setting 'vdd-1v8' regulator to 1800000 micro volts
  280. [0009.315] could not find regulator
  281. [0009.319] could not find regulator
  282. [0009.322] could not find regulator
  283. [0009.350] using default cmu settings
  284. [0009.354] dc_hdmi_enable, starting HDMI initialisation
  285. [0009.360] dc_hdmi_enable, HDMI initialisation complete
  286. [0009.365] list and configure display window
  287. [0009.374] display console init completed
  288. [0009.385] subnode volume_up is not found !
  289. [0009.389] subnode back is not found !
  290. [0009.393] subnode volume_down is not found !
  291. [0009.397] subnode menu is not found !
  292. [0009.401] Gpio keyboard init success
  293. [0009.450] found decompressor handler: lz4-legacy
  294. [0009.465] decompressing blob (type 1)...
  295. [0009.500] load_bmp_blob: panelresolution=1080 type=3
  296. [0009.556] decompressor handler not found
  297. [0009.560] load_firmware_blob: Firmware blob loaded, entries=2
  298. [0009.566] se_aes_verify_sbk_clear: Error
  299. [0009.570] bl_battery_charging: connected to external power supply
  300. [0009.577] xusb is supported
  301. [0009.583] error while finding nvidia,portmap
  302. [0009.588] could not find regulator
  303. [0010.092] xusb blob version 0 size 126464
  304. [0010.096] firmware size 126464
  305. [0010.100] Firmware timestamp: 0x59fc70d3, Version: 50.20 release
  306. [0010.116] xhci0: 64 bytes context size, 32-bit DMA
  307. [0010.157] usbus0: 5.0Gbps Super Speed USB v3.0
  308. [0010.176] uhub0: <Nvidia XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
  309. [0010.826] uhub0: 9 ports with 9 removable, self powered
  310. [0013.026] failed to get HID devices
  311. [0013.030] failed to init xhci or no usb device attached
  312. [0013.071] device_query_partition_size: failed to open partition sd0:USP !
  313. [0013.078] USP partition read failed!
  314. [0013.081] blob_init: blob-partition USP header read failed
  315. [0013.087] android_boot Unable to update recovery partition
  316. [0013.092] kfs_getpartname: name = LNX
  317. [0013.096] Loading kernel from LNX
  318. [0014.406] Verifying boot image in OdmNonSecureSBK mode
  319. [0015.699] kernel load address: 0x80080000, size: 11364030 bytes
  320. [0015.705] ramdisk load address: 0x84100000, size: 2115985 bytes
  321. [0015.711] load kernel from storage
  322. [0015.725] found decompressor handler: zlib
  323. [0016.825] decompressing kernel...
  324. [0016.829] kernel_source addr:0x9b6e1000; size:11364030
  325. [0016.834] kernel_laddr addr:0x80080000; max kernel size:49807360
  326. [0017.807] Successfully loaded kernel and ramdisk images
  327. [0017.813] load_bmp_blob: panelresolution=1080 type=3
  328. [0018.308] display bmp image done
  329. [0018.311] NCK carveout not present
  330. [0018.314] Skipping dts_overrides
  331. [0018.317] NCK carveout not present
  332. [0018.321] shim_invoke: No NCT, Calling dts updates
  333. [0018.332] Find /i2c@7000c000's alias i2c0
  334. [0018.336] get eeprom at 1-a0, size 256, type 0
  335. [0018.345] Find /i2c@7000c500's alias i2c2
  336. [0018.348] get eeprom at 3-a0, size 256, type 0
  337. [0018.353] get eeprom at 3-ae, size 256, type 0
  338. [0018.357] pm_ids_update: Updating 1,a0, size 256, type 0
  339. [0018.363] I2C slave not started
  340. [0018.366] I2C write failed
  341. [0018.368] Writing offset failed
  342. [0018.371] eeprom_init: EEPROM read failed
  343. [0018.375] pm_ids_update: eeprom init failed
  344. [0018.380] pm_ids_update: Updating 3,a0, size 256, type 0
  345. [0018.410] pm_ids_update: The pm board id is 3448-0000-200
  346. [0018.416] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
  347. [0018.424] pm_ids_update: pm id update successful
  348. [0018.429] pm_ids_update: Updating 3,ae, size 256, type 0
  349. [0018.459] pm_ids_update: The pm board id is 3449-0000-200
  350. [0018.465] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
  351. [0018.473] pm_ids_update: pm id update successful
  352. [0018.503] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  353. [0018.509] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
  354. [0018.517] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  355. [0018.523] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
  356. [0018.531] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e4:09:7a
  357. [0018.538] Plugin Manager: Parse ODM data 0x00094000
  358. [0018.548] shim_cmdline_install: /chosen/bootargs: androidboot.secureos=tlk earlycon=uart8250,mmio32,0x70006000
  359. [0018.559] Add serial number:04211190055890c00207 as DT property
  360. [0018.568] "bpmp" doesn't exist, creating
  361. [0018.574] Updated bpmp info to DTB
  362. [0018.578] Updated initrd info to DTB
  363. [0018.582] "proc-board" doesn't exist, creating
  364. [0018.588] Updated board info to DTB
  365. [0018.591] "pmu-board" doesn't exist, creating
  366. [0018.597] Updated board info to DTB
  367. [0018.600] "display-board" doesn't exist, creating
  368. [0018.606] Updated board info to DTB
  369. [0018.609] "reset" doesn't exist, creating
  370. [0018.614] Updated reset info to DTB
  371. [0018.617] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 consol
  372. [0018.657] DTB cmdline: androidboot.secureos=tlk earlycon=uart8250,mmio32,0x70006000
  373. [0018.664] boot image cmdline: androidboot.hardware=foster_e androidboot.selinux=permissive buildvariant=userdebug
  374. [0018.675] Updated bootarg info to DTB
  375. [0018.679] Adding uuid 000000016441078208000000050702c0 to DT
  376. [0018.690] device_query_partition_size: failed to open partition sd0:RP6 !
  377. [0018.697] RP6 partition read failed!
  378. [0018.701] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
  379. [0018.707] Updated memory info to DTB
  380. [0018.713] Updated system-lp0-disable info to DTB
  381. [0018.721] set vdd_core voltage to 1075 mv
  382. [0018.725] setting 'vdd-core' regulator to 1075000 micro volts
  383. [0018.747] could not find regulator
  384. [0018.750] Found secure-pmc; disable BPMP
  385. <6>[ 0.000000] Booting Linux on physical CPU 0x0
  386. <5>[ 0.000000] Linux version 4.9.109-tegra (nvidia@hp-z420) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #1 SMP PREEMPT Tue Apr 23 11:38:20 EDT 2019
  387. <6>[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
  388. <6>[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32,
  389. <6>[ 0.000000] OF: fdt: - 80000000 , 7ee00000
  390. <6>[ 0.000000] OF: fdt: - 100000000 , 7f200000
  391. <6>[ 0.000000] Found tegra_fbmem: 00800000@92cb2000
  392. <6>[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
  393. <6>[ 0.000000] bootconsole [uart8250] enabled
  394. <6>[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
  395. <6>[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
  396. <6>[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
  397. <6>[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
  398. <6>[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
  399. <6>[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
  400. <6>[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
  401. <6>[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
  402. <6>[ 0.000000] psci: probing for conduit method from DT.
  403. <6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
  404. <6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
  405. <6>[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  406. <6>[ 0.000000] psci: SMC Calling Convention v1.1
  407. <6>[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefc9000 s53464 r8192 d32552 u94208
  408. <6>[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
  409. <6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
  410. <5>[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_conso
  411. <6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  412. <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  413. <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  414. <6>[ 0.000000] Memory: 3565752K/4159488K available (15614K kernel code, 2942K rwdata, 6316K rodata, 8128K init, 721K bss, 118600K reserved, 475136K cma-reserved)
  415. <5>[ 0.000000] Virtual kernel memory layout:
  416. <5>[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  417. <5>[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  418. <5>[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008fc0000 ( 15616 KB)
  419. <5>[ 0.000000] .rodata : 0xffffff8008fc0000 - 0xffffff80095f0000 ( 6336 KB)
  420. <5>[ 0.000000] .init : 0xffffff80095f0000 - 0xffffff8009de0000 ( 8128 KB)
  421. <5>[ 0.000000] .data : 0xffffff8009de0000 - 0xffffff800a0bf808 ( 2943 KB)
  422. <5>[ 0.000000] .bss : 0xffffff800a0bf808 - 0xffffff800a173fdc ( 722 KB)
  423. <5>[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
  424. <5>[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  425. <5>[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  426. <5>[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
  427. <5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
  428. <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  429. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  430. <6>[ 0.000000] Build-time adjustment of leaf fanout to 64.
  431. <6>[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  432. <6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  433. <4>[ 0.000000] **********************************************************
  434. <4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  435. <4>[ 0.000000] ** **
  436. <4>[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
  437. <4>[ 0.000000] ** **
  438. <4>[ 0.000000] ** This means that this is a DEBUG kernel and it is **
  439. <4>[ 0.000000] ** unsafe for production use. **
  440. <4>[ 0.000000] ** **
  441. <4>[ 0.000000] ** If you see this message and you are not debugging **
  442. <4>[ 0.000000] ** the kernel, report this immediately to your vendor! **
  443. <4>[ 0.000000] ** **
  444. <4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  445. <4>[ 0.000000] **********************************************************
  446. <6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
  447. <6>[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
  448. <6>[ 0.000000] t210 clock and reset probe
  449. <4>[ 0.000000] boot misc1 0x90000000: expected 0x10000000
  450. <4>[ 0.000000] (comparison mask = 0xf8000000)
  451. <4>[ 0.000000] boot misc2 0x0: expected 0xf6e0f620
  452. <4>[ 0.000000] (comparison mask = 0xffffffff)
  453. <4>[ 0.000000] boot misc3 0xf5c1: expected 0x10000
  454. <4>[ 0.000000] (comparison mask = 0xffffffff)
  455. <4>[ 0.000000] PLL_D2 already enabled. Postponing set full defaults
  456. <6>[ 0.000000] clk_cbus_recalc_rate: no gbus parent
  457. <6>[ 0.000000] clk_cbus_recalc_rate: no gbus parent
  458. <6>[ 0.000000] clk_cbus_recalc_rate: no gbus parent
  459. <6>[ 0.000000] clk_cbus_recalc_rate: no gbus parent
  460. <6>[ 0.000000] clk_cbus_recalc_rate: no gbus parent
  461. <6>[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
  462. <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  463. <6>[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  464. <6>[ 0.010009] kmemleak: Kernel memory leak detector disabled
  465. <6>[ 0.016034] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  466. <6>[ 0.026922] pid_max: default: 32768 minimum: 301
  467. <6>[ 0.032402] Security Framework initialized
  468. <6>[ 0.036923] SELinux: Initializing.
  469. <6>[ 0.041251] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  470. <6>[ 0.048453] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  471. <6>[ 0.057399] ftrace: allocating 48831 entries in 191 pages
  472. <6>[ 0.242519] ASID allocator initialised with 65536 entries
  473. <6>[ 0.284452] tegra-id: chipid=22117.
  474. <6>[ 0.288397] tegra-id: opt_subrevision=0.
  475. <6>[ 0.292778] Tegra Speedo/IDDQ fuse revision 4
  476. <6>[ 0.297556] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
  477. <6>[ 0.304398] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
  478. <6>[ 0.311508] Tegra: CPU Speedo Value 2077, SoC Speedo Value 1989, GPU Speedo Value 2094
  479. <6>[ 0.319960] Tegra: CPU IDDQ Value 2160, SoC IDDQ Value 2368, GPU IDDQ Value 2985
  480. <6>[ 0.327895] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1
  481. <6>[ 0.335012] DTS File Name: /home/nvidia/TV/jetson-nano/android-8.0/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-00s
  482. <6>[ 0.354332] DTB Build time: Apr 23 2019 11:42:31
  483. <6>[ 0.361144] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
  484. <3>[ 0.368252] tegra-roc-flush: DT required.
  485. <5>[ 1.232729] random: fast init done
  486. <2>[ 1.424746] CPU1: failed to come online
  487. <3>[ 1.428981] CPU1: failed in unknown state : 0x0
  488. <2>[ 2.480737] CPU2: failed to come online
  489. <3>[ 2.484973] CPU2: failed in unknown state : 0x0
  490. <2>[ 3.536743] CPU3: failed to come online
  491. <3>[ 3.540972] CPU3: failed in unknown state : 0x0
  492. <6>[ 3.545972] Brought up 1 CPUs
  493. <6>[ 3.549306] SMP: Total of 1 processors activated.
  494. <6>[ 3.554436] CPU features: detected feature: 32-bit EL0 Support
  495. <6>[ 3.560895] CPU: All CPU(s) started at EL2
  496. <6>[ 3.565409] alternatives: patching kernel code
  497. <6>[ 3.582351] devtmpfs: initialized
  498. <6>[ 3.620706] Initilizing CustomIPI irq domain
  499. <6>[ 3.626108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  500. <6>[ 3.636524] futex hash table entries: 1024 (order: 4, 65536 bytes)
  501. <6>[ 3.656607] pinctrl core: initialized pinctrl subsystem
  502. <6>[ 3.663078] OS set in device tree is not L4T.
  503. <6>[ 3.668630] regulator-dummy: no parameters
  504. <6>[ 3.673727] Initializing plugin-manager
  505. <6>[ 3.678203] Plugin module not found
  506. <6>[ 3.682221] node /plugin-manager/fragement@0 match with board >=3448-0000-100
  507. <6>[ 3.690417] node /plugin-manager/fragment@1 match with board >=3448-0000-101
  508. <6>[ 3.698466] node /plugin-manager/fragment@5 match with board 3449-0000-200
  509. <6>[ 3.706141] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt
  510. <6>[ 3.714366] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt
  511. <6>[ 3.725544] NET: Registered protocol family 16
  512. <6>[ 3.755864] pstore: using zlib compression
  513. <6>[ 3.761171] console [pstore-1] enabled
  514. <6>[ 3.765644] pstore: Registered ramoops as persistent store backend
  515. <6>[ 3.772396] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
  516. <6>[ 3.788858] cpuidle: using governor menu
  517. <6>[ 3.797653] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
  518. <6>[ 3.806025] vdso: 2 pages (1 code @ ffffff8008fc7000, 1 data @ ffffff8009de4000)
  519. <6>[ 3.813991] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  520. <6>[ 3.825371] atomic_pool_init():636: DMA: preallocated 1024 KiB pool for atomic allocations
  521. <6>[ 3.835713] tegra_bpmp_of_clk_init: EMC proxy not found.
  522. <6>[ 3.842591] tegra_powergate_init: DONE
  523. <6>[ 3.846984] DTS File Name: /home/nvidia/TV/jetson-nano/android-8.0/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-00s
  524. <6>[ 3.866317] DTB Build time: Apr 23 2019 11:42:31
  525. <3>[ 3.872584] tegra_debug_uart_syscore_init: stdout-path property missing
  526. <6>[ 3.879778] Tegra reboot handler registered.
  527. <6>[ 3.889325] iommu: Adding device tegra-carveouts to group 0
  528. <6>[ 3.895803] platform tegra-carveouts: domain=ffffffc0f9afb198 allocates as[0]=ffffffc0f9ba40a8
  529. <6>[ 3.905484] iommu: Adding device smmu_test to group 1
  530. <6>[ 3.911236] platform smmu_test: domain=ffffffc0f9afb3d8 allocates as[0]=ffffffc0f9ba4110
  531. <6>[ 3.920868] mc: mapped MMIO address: 0xffffff800802c000 -> 0x70019000
  532. <6>[ 3.928004] mc: mapped MMIO address: 0xffffff8008063000 -> 0x7001c000
  533. <6>[ 3.935004] mc: mapped MMIO address: 0xffffff8008077000 -> 0x7001d000
  534. <6>[ 3.941954] tegra-mc 70019000.mc: No mssnvlink node
  535. <6>[ 3.947325] mc-err: mcerr ops are set to t21x
  536. <6>[ 3.962418] GPIO line 151 (camera-control-output-low) hogged as output/low
  537. <6>[ 3.970275] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
  538. <6>[ 3.985936] iommu: Adding device 70090000.xusb to group 2
  539. <6>[ 3.992314] iommu: Adding device 70006000.serial to group 3
  540. <6>[ 3.998537] platform 70006000.serial: domain=ffffffc0f9be2c18 allocates as[0]=ffffffc0f9ba4178
  541. <6>[ 4.008223] iommu: Adding device 70006040.serial to group 4
  542. <6>[ 4.014675] iommu: Adding device 70006200.serial to group 5
  543. <6>[ 4.020992] iommu: Adding device sound to group 6
  544. <6>[ 4.026339] platform sound: domain=ffffffc0f946f198 allocates as[0]=ffffffc0f9ba41e0
  545. <6>[ 4.035299] iommu: Adding device 7000d400.spi to group 7
  546. <6>[ 4.041521] iommu: Adding device 7000d600.spi to group 8
  547. <6>[ 4.047624] iommu: Adding device 70410000.spi to group 9
  548. <6>[ 4.053777] iommu: Adding device 50000000.host1x to group 10
  549. <6>[ 4.060296] iommu: Adding device 54080000.vi to group 11
  550. <6>[ 4.066543] iommu: Adding device 54600000.isp to group 12
  551. <6>[ 4.072798] iommu: Adding device 54680000.isp to group 13
  552. <6>[ 4.078998] iommu: Adding device tegradc.0 to group 14
  553. <6>[ 4.084853] platform tegradc.0: domain=ffffffc0f947e0d8 allocates as[0]=ffffffc0f9ba4248
  554. <6>[ 4.097849] platform tegradc.0: IOVA linear map 0x0000000092cb2000(800000)
  555. <6>[ 4.105633] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
  556. <6>[ 4.113621] iommu: Adding device tegradc.1 to group 15
  557. <6>[ 4.119410] platform tegradc.1: domain=ffffffc0f947e318 allocates as[0]=ffffffc0f9ba42b0
  558. <6>[ 4.132304] platform tegradc.1: IOVA linear map 0x0000000092cb2000(800000)
  559. <6>[ 4.140107] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
  560. <6>[ 4.147965] iommu: Adding device 54340000.vic to group 16
  561. <6>[ 4.154124] iommu: Adding device 544c0000.nvenc to group 17
  562. <6>[ 4.160424] iommu: Adding device 54500000.tsec to group 18
  563. <6>[ 4.166632] iommu: Adding device 54100000.tsecb to group 19
  564. <6>[ 4.172963] iommu: Adding device 54480000.nvdec to group 20
  565. <6>[ 4.179281] iommu: Adding device 54380000.nvjpg to group 21
  566. <6>[ 4.186540] iommu: Adding device 546c0000.i2c to group 22
  567. <6>[ 4.193044] iommu: Adding device 57000000.gpu to group 23
  568. <6>[ 4.199445] platform 57000000.gpu: domain=ffffffc0f94bb318 allocates as[0]=ffffffc0f9ba4318
  569. <6>[ 4.208516] platform 57000000.gpu: domain=ffffffc0f94bb318 allocates as[1]=ffffffc0f9ba4380
  570. <6>[ 4.217483] platform 57000000.gpu: domain=ffffffc0f94bb318 allocates as[2]=ffffffc0f9ba43e8
  571. <6>[ 4.226442] platform 57000000.gpu: domain=ffffffc0f94bb318 allocates as[3]=ffffffc0f9ba4450
  572. <4>[ 4.236629] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
  573. <6>[ 4.246457] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
  574. <6>[ 4.253963] tegra-pmc: ### PMC reset source: TEGRA_WATCHDOG
  575. <6>[ 4.260020] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
  576. <6>[ 4.266738] tegra-pmc: ### PMC reset status reg: 0x1
  577. <6>[ 4.308969] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
  578. <6>[ 4.316787] tegra-pmc: Clear bootloader IO dpd settings
  579. <6>[ 4.322491] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
  580. <6>[ 4.329133] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
  581. <6>[ 4.337923] iommu: Adding device 70012000.se to group 24
  582. <6>[ 4.344555] iommu: Adding device 7000c000.i2c to group 25
  583. <6>[ 4.350838] iommu: Adding device 7000c400.i2c to group 26
  584. <6>[ 4.357046] iommu: Adding device 7000c500.i2c to group 27
  585. <6>[ 4.363260] iommu: Adding device 7000c700.i2c to group 28
  586. <6>[ 4.369455] iommu: Adding device 7000d000.i2c to group 29
  587. <6>[ 4.375639] iommu: Adding device 7000d100.i2c to group 30
  588. <6>[ 4.381883] iommu: Adding device sdhci-tegra.0 to group 31
  589. <6>[ 4.388018] platform sdhci-tegra.0: domain=ffffffc0f9590498 allocates as[0]=ffffffc0f9ba44b8
  590. <6>[ 4.398001] iommu: Adding device 700d0000.xudc to group 32
  591. <6>[ 4.410905] vdd-ac-bat: 5000 mV
  592. <6>[ 4.415336] vdd-5v0-sys: 5000 mV
  593. <6>[ 4.420351] vdd-5v0-hdmi: supplied by vdd-5v0-sys
  594. <6>[ 4.425839] vdd-5v0-hdmi: 5000 mV
  595. <6>[ 4.430128] vdd-1v8: 1800 mV
  596. <6>[ 4.434035] vdd-fan: supplied by vdd-5v0-sys
  597. <6>[ 4.438834] vdd-fan: 5000 mV
  598. <6>[ 4.442613] vdd-usb-vbus: supplied by vdd-5v0-sys
  599. <6>[ 4.447931] vdd-usb-vbus: 5000 mV
  600. <6>[ 4.452339] vdd-usb-vbus2: 5000 mV
  601. <6>[ 4.542531] eventlib_kernel: keventlib is initialized, test id: 0
  602. <5>[ 4.550531] SCSI subsystem initialized
  603. <6>[ 4.557179] usbcore: registered new interface driver usbfs
  604. <6>[ 4.563760] usbcore: registered new interface driver hub
  605. <6>[ 4.569745] usbcore: registered new device driver usb
  606. <6>[ 4.580217] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
  607. <6>[ 4.593022] vdd-core: 600 <--> 1162 mV at 1075 mV
  608. <6>[ 4.599471] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
  609. <6>[ 4.608753] vdd-ddr-1v1: 1150 mV
  610. <6>[ 4.616749] vdd-pre-reg-1v35: 1350 mV
  611. <6>[ 4.624759] vdd-1v8: 1800 mV
  612. <4>[ 4.628364] vdd-1v8: Failed to create debugfs directory
  613. <6>[ 4.636757] avdd-sys-1v2: 1200 mV
  614. <6>[ 4.644758] vdd-pex-1v0: 1050 mV
  615. <6>[ 4.649258] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
  616. <6>[ 4.655806] max77620-ldo3: at 3100 mV
  617. <6>[ 4.664756] vdd-rtc: 850 <--> 1100 mV at 1000 mV
  618. <6>[ 4.670537] max77620-ldo5: at 3100 mV
  619. <6>[ 4.675323] max77620-ldo6: at 2800 mV
  620. <6>[ 4.680756] avdd-1v05-pll: 1050 mV
  621. <6>[ 4.688760] avdd-io-hdmi-dp: 1050 mV
  622. <6>[ 4.694196] GPIO line 505 (spmic-default-output-high) hogged as output/high
  623. <6>[ 4.702049] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
  624. <6>[ 4.713611] max77620 4-003c: max77620 probe successful
  625. <4>[ 4.721942] i2c i2c-6: Unbalanced pm_runtime_enable!
  626. <6>[ 4.728197] media: Linux media interface: v0.10
  627. <6>[ 4.733395] Linux video capture interface: v2.00
  628. <6>[ 4.739685] pps_core: LinuxPPS API ver. 1 registered
  629. <6>[ 4.745418] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  630. <6>[ 4.755218] PTP clock support registered
  631. <6>[ 4.763910] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
  632. <6>[ 4.773155] Advanced Linux Sound Architecture Driver Initialized.
  633. <6>[ 4.780864] Bluetooth: Core ver 2.22
  634. <6>[ 4.785162] NET: Registered protocol family 31
  635. <6>[ 4.790087] Bluetooth: HCI device and connection manager initialized
  636. <6>[ 4.796955] Bluetooth: HCI socket layer initialized
  637. <6>[ 4.802331] Bluetooth: L2CAP socket layer initialized
  638. <6>[ 4.807859] Bluetooth: SCO socket layer initialized
  639. <6>[ 4.814903] tegra210_dvfs: no clock found for sdmmc2_ddr
  640. <6>[ 4.820877] tegra210_dvfs: no clock found for sdmmc4_ddr
  641. <6>[ 4.826701] tegra210_dvfs: no clock found for sdmmc1_ddr
  642. <6>[ 4.832490] tegra210_dvfs: no clock found for sdmmc3_ddr
  643. <6>[ 4.841243] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
  644. <6>[ 4.850731] vdd-3v3-sys: supplied by vdd-5v0-sys
  645. <6>[ 4.855863] vdd-3v3-sys: 3300 mV
  646. <6>[ 4.859896] vdd-1v8: supplied by vdd-3v3-sys
  647. <6>[ 4.868814] vdd-usb-vbus2: supplied by vdd-3v3-sys
  648. <6>[ 4.874497] vdd-3v3-sd: supplied by vdd-3v3-sys
  649. <6>[ 4.879518] vdd-3v3-sd: 3300 mV
  650. <6>[ 4.884102] avdd-io-edp-1v05: supplied by avdd-1v05-pll
  651. <6>[ 4.889857] avdd-io-edp-1v05: 1050 mV
  652. <6>[ 4.894488] vdd-usb-hub-en: supplied by vdd-1v8
  653. <6>[ 4.899558] vdd-usb-hub-en: 5000 mV
  654. <6>[ 4.905388] camchar: rtcpu character device driver loaded
  655. <6>[ 4.912517] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
  656. <6>[ 4.921421] clocksource: Switched to clocksource arch_sys_counter
  657. <5>[ 4.980044] VFS: Disk quotas dquot_6.6.0
  658. <6>[ 4.984573] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  659. <5>[ 4.992231] FS-Cache: Loaded
  660. <6>[ 4.995602] nvmap_heap_init: nvmap_heap_init: created heap block cache
  661. <6>[ 5.003012] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
  662. <6>[ 5.017661] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
  663. <6>[ 5.018090] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
  664. <6>[ 5.018366] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
  665. <6>[ 5.018610] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
  666. <6>[ 5.018764] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
  667. <6>[ 5.019084] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
  668. <6>[ 5.019087] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
  669. <6>[ 5.019541] NET: Registered protocol family 2
  670. <6>[ 5.020642] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  671. <6>[ 5.020856] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  672. <6>[ 5.021576] TCP: Hash tables configured (established 32768 bind 32768)
  673. <6>[ 5.021742] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  674. <6>[ 5.021825] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  675. <6>[ 5.022272] NET: Registered protocol family 1
  676. <6>[ 5.060941] RPC: Registered named UNIX socket transport module.
  677. <6>[ 5.060944] RPC: Registered udp transport module.
  678. <6>[ 5.060947] RPC: Registered tcp transport module.
  679. <6>[ 5.060949] RPC: Registered tcp NFSv4.1 backchannel transport module.
  680. <6>[ 5.061367] Trying to unpack rootfs image as initramfs...
  681. <6>[ 5.255080] Freeing initrd memory: 2064K
  682. <6>[ 5.267749] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
  683. <6>[ 5.280496] cma: enabled page replacement for spfn=d7000, epfn=f0000
  684. <6>[ 5.288226] host1x 50000000.host1x: initialized
  685. <6>[ 5.290120] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  686. <6>[ 5.292378] audit: initializing netlink subsys (disabled)
  687. <5>[ 5.292447] audit: type=2000 audit(4.763:1): initialized
  688. <6>[ 5.307603] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  689. <6>[ 5.336864] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  690. <5>[ 5.345637] NFS: Registering the id_resolver key type
  691. <5>[ 5.345665] Key type id_resolver registered
  692. <5>[ 5.345666] Key type id_legacy registered
  693. <6>[ 5.345678] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  694. <6>[ 5.368164] fuse init (API version 7.26)
  695. <6>[ 5.383874] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful<6>[ 5.393911] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
  696. <6>[ 5.402996] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
  697. <6>[ 5.413337] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
  698. <6>[ 5.422884] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
  699. <6>[ 5.430510] NET: Registered protocol family 38
  700. <6>[ 5.430784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
  701. <6>[ 5.430791] io scheduler noop registered
  702. <6>[ 5.430795] io scheduler deadline registered
  703. <6>[ 5.431066] io scheduler cfq registered (default)
  704. <6>[ 5.433952] gic 702f9000.agic: GIC IRQ controller registered
  705. <6>[ 5.437282] iommu: Adding device 702ef000.adsp to group 33
  706. <6>[ 5.449122] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
  707. <6>[ 5.449291] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
  708. <6>[ 5.449863] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71e7c0f
  709. <6>[ 5.449870] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
  710. <6>[ 5.459732] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
  711. <6>[ 5.459911] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
  712. <6>[ 5.460029] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
  713. <6>[ 5.460250] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
  714. <6>[ 5.460358] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
  715. <6>[ 5.460473] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
  716. <6>[ 5.460586] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
  717. <6>[ 5.460703] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
  718. <6>[ 5.460838] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
  719. <6>[ 5.460950] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
  720. <6>[ 5.622471] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
  721. <6>[ 5.623242] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
  722. <6>[ 5.623888] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
  723. <6>[ 5.624224] Adding domain tsec-pd to PM domain host1x-pd
  724. <6>[ 5.634450] tsec 54500000.tsec: initialized
  725. <6>[ 5.635855] tsec 54100000.tsecb: initialized
  726. <6>[ 5.636670] Adding domain nvdec-pd to PM domain host1x-pd
  727. <6>[ 5.650460] nvdec 54480000.nvdec: initialized
  728. <6>[ 5.651522] Adding domain vic03-pd to PM domain host1x-pd
  729. <6>[ 5.651702] Adding domain msenc-pd to PM domain host1x-pd
  730. <6>[ 5.651851] Adding domain nvjpg-pd to PM domain host1x-pd
  731. <6>[ 5.656019] falcon 54340000.vic: initialized
  732. <6>[ 5.657265] falcon 544c0000.nvenc: initialized
  733. <6>[ 5.658734] falcon 54380000.nvjpg: initialized
  734. <6>[ 5.674879] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
  735. <6>[ 5.674942] display board info: id 0x0, fab 0x0
  736. <6>[ 5.674993] generic_infoframe_type: 0x87
  737. <6>[ 5.675113] tegradc tegradc.0: DT parsed successfully
  738. <6>[ 5.675155] tegradc tegradc.0: Display dc.ffffff800ab00000 registered with id=0
  739. <6>[ 5.675770] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781
  740. <3>[ 5.676060] tegradc tegradc.0: Not found padcontroller handles: -22
  741. <3>[ 5.676065] tegradc tegradc.0: sor: hdmi IO padctrl unavailable
  742. <6>[ 5.677281] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=353
  743. <6>[ 5.677314] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
  744. <5>[ 5.677339] tegra_cec 70015000.tegra_cec: tegra_cec_init started
  745. <6>[ 5.677764] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
  746. <5>[ 5.677767] tegra_cec 70015000.tegra_cec: probed
  747. <6>[ 5.698032] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
  748. <6>[ 5.699026] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
  749. <6>[ 5.699384] kfuse 7000fc00.kfuse: initialized
  750. <6>[ 5.702058] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
  751. <6>[ 5.702860] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
  752. <6>[ 5.704146] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
  753. <6>[ 5.704155] vdd-cpu: 708 <--> 1322 mV at 708 mV
  754. <3>[ 5.710266] pwm-regulator pwm_regulators:pwm-regulator@1: Failed to get PWM: -517
  755. <6>[ 5.710777] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  756. <6>[ 5.710857] No Device Node present for smmu client: serial8250 !!
  757. <5>[ 5.710865] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
  758. <6>[ 5.710904] iommu: Adding device serial8250 to group 35
  759. <6>[ 5.714906] console [ttyS0] disabled
  760. <6>[ 5.721246] tegradc tegradc.0: probed
  761. <6>[ 5.993093] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 319, base_baud = 25500000) is a Tegra
  762. <6>[ 6.002688] nvmap_page_pool_init: Total RAM pages: 1010738
  763. <6>[ 6.002691] nvmap_page_pool_init: nvmap page pool size: 126342 pages (493 MB)
  764. <6>[ 6.003169] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
  765. <6>[ 6.003957] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
  766. <6>[ 6.005317] nvmap_background_zero_thread: PP zeroing thread starting.
  767. <6>[ 6.042187] console [ttyS0] enabled
  768. <6>[ 6.042187] console [ttyS0] enabled
  769. <6>[ 6.049846] tegradc tegradc.0: fb registered
  770. <6>[ 6.049846] tegradc tegradc.0: fb registered
  771. <6>[ 6.067922] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
  772. <6>[ 6.067922] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
  773. <6>[ 6.067976] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m
  774. <6>[ 6.067976] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m
  775. <4>[ 6.068368] edid invalid
  776. <4>[ 6.068368] edid invalid
  777. <4>[ 6.068371] edid invalid
  778. <4>[ 6.068371] edid invalid
  779. <4>[ 6.068524] edid invalid
  780. <4>[ 6.068524] edid invalid
  781. <4>[ 6.068525] edid invalid
  782. <4>[ 6.068525] edid invalid
  783. <6>[ 6.084694] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
  784. <6>[ 6.084694] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
  785. <6>[ 6.084759] tegradc tegradc.1: No lt-data, using default setting
  786. <6>[ 6.084759] tegradc tegradc.1: No lt-data, using default setting
  787. <6>[ 6.084784] tegradc tegradc.1: No hpd-gpio in DT
  788. <6>[ 6.084784] tegradc tegradc.1: No hpd-gpio in DT
  789. <6>[ 6.084814] tegradc tegradc.1: DT parsed successfully
  790. <6>[ 6.084814] tegradc tegradc.1: DT parsed successfully
  791. <6>[ 6.084869] tegradc tegradc.1: Display dc.ffffff800f480000 registered with id=1
  792. <6>[ 6.084869] tegradc tegradc.1: Display dc.ffffff800f480000 registered with id=1
  793. <4>[ 6.102720] edid invalid
  794. <4>[ 6.102720] edid invalid
  795. <6>[ 6.130535] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244
  796. <6>[ 6.130535] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244
  797. <3>[ 6.137626] tegradc tegradc.1: Not found padcontroller handles: -22
  798. <3>[ 6.137626] tegradc tegradc.1: Not found padcontroller handles: -22
  799. <3>[ 6.137632] tegradc tegradc.1: sor: hdmi-dp0 IO padctrl unavailable
  800. <3>[ 6.137632] tegradc tegradc.1: sor: hdmi-dp0 IO padctrl unavailable
  801. <6>[ 6.163225] tegradc tegradc.1: probed
  802. <6>[ 6.163225] tegradc tegradc.1: probed
  803. <6>[ 6.288653] tegradc tegradc.1: fb registered
  804. <6>[ 6.288653] tegradc tegradc.1: fb registered
  805. <6>[ 6.298011] bootconsole [uart8250] disabled
  806. <6>[ 6.298011] bootconsole [uart8250] disabled
  807. <6>[ 6.307277] tegradc tegradc.0: hdmi: plugged
  808. <6>[ 6.312684] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 320, base_baud = 0) is a TEGRA_UART
  809. <6>[ 6.313112] serial-tegra 70006200.serial: RX in PIO mode
  810. <6>[ 6.313201] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 321, base_baud = 0) is a TEGRA_UART
  811. <6>[ 6.369553] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
  812. <6>[ 6.381502] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
  813. <6>[ 6.458086] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
  814. <6>[ 6.464023] nvhdcp: link verified!
  815. <6>[ 6.468195] hpd: hpd_switch 0
  816. <6>[ 6.471459] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
  817. <6>[ 6.493458] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
  818. <6>[ 6.499848] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
  819. <6>[ 6.566649] brd: module loaded
  820. <6>[ 6.607897] loop: module loaded
  821. <6>[ 6.679111] nbd: registered device at major 43
  822. <6>[ 6.693167] zram: Added device: zram0
  823. <6>[ 6.701492] tegra_cec 70015000.tegra_cec: physical address: 10:00.
  824. <6>[ 6.708305] tegra_profiler: Branch: Dev
  825. <6>[ 6.708308] tegra_profiler: Version: 1.123
  826. <6>[ 6.708310] tegra_profiler: Samples version: 43
  827. <6>[ 6.708313] tegra_profiler: IO version: 25
  828. <6>[ 6.708321] armv8_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, pmuver: 0x1
  829. <6>[ 6.708548] tegra_profiler: auth: init
  830. <6>[ 6.710193] hisi_sas: driver version v1.6
  831. <6>[ 6.719680] tegra-qspi 70410000.spi: Prod settings list not found
  832. <6>[ 6.722218] libphy: Fixed MDIO Bus: probed
  833. <6>[ 6.722924] tun: Universal TUN/TAP device driver, 1.6
  834. <6>[ 6.722926] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  835. <6>[ 6.737350] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  836. <6>[ 6.737353] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  837. <6>[ 6.737430] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  838. <6>[ 6.737432] igb: Copyright (c) 2007-2014 Intel Corporation.
  839. <6>[ 6.737482] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  840. <6>[ 6.737484] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  841. <6>[ 6.737524] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
  842. <6>[ 6.737527] Copyright(c) 1999 - 2017 Intel Corporation.
  843. <6>[ 6.749460] sky2: driver version 1.30
  844. <6>[ 6.749879] PPP generic driver version 2.4.2
  845. <6>[ 6.750819] PPP BSD Compression module registered
  846. <6>[ 6.750823] PPP Deflate Compression module registered
  847. <6>[ 6.750864] PPP MPPE Compression module registered
  848. <6>[ 6.750871] NET: Registered protocol family 24
  849. <6>[ 6.750880] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  850. <6>[ 6.751007] usbcore: registered new interface driver pegasus
  851. <6>[ 6.751042] usbcore: registered new interface driver rtl8150
  852. <6>[ 6.751092] usbcore: registered new interface driver asix
  853. <6>[ 6.751125] usbcore: registered new interface driver ax88179_178a
  854. <6>[ 6.751156] usbcore: registered new interface driver cdc_ether
  855. <6>[ 6.751187] usbcore: registered new interface driver dm9601
  856. <6>[ 6.751229] usbcore: registered new interface driver CoreChips
  857. <6>[ 6.751273] usbcore: registered new interface driver smsc75xx
  858. <6>[ 6.751314] usbcore: registered new interface driver smsc95xx
  859. <6>[ 6.751346] usbcore: registered new interface driver net1080
  860. <6>[ 6.751376] usbcore: registered new interface driver plusb
  861. <6>[ 6.751416] usbcore: registered new interface driver cdc_subset
  862. <6>[ 6.751445] usbcore: registered new interface driver zaurus
  863. <6>[ 6.751477] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  864. <6>[ 6.751521] usbcore: registered new interface driver cdc_ncm
  865. <6>[ 6.751553] usbcore: registered new interface driver r8152
  866. <6>[ 6.752234] VFIO - User Level meta-driver version: 0.3
  867. <6>[ 6.762759] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  868. <6>[ 6.762784] ehci-pci: EHCI PCI platform driver
  869. <6>[ 6.762828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  870. <6>[ 6.762838] ohci-pci: OHCI PCI platform driver
  871. <6>[ 6.762875] ohci-platform: OHCI generic platform driver
  872. <6>[ 6.765253] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
  873. <6>[ 6.822695] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
  874. <6>[ 6.836703] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f904ec00 id
  875. <6>[ 6.837959] usbcore: registered new interface driver usb_ehset_test
  876. <6>[ 6.841185] tegra-xudc-new 700d0000.xudc: device count: 1
  877. <6>[ 6.848338] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
  878. <6>[ 6.848348] tegra-xudc-new 700d0000.xudc: vbus state: 1
  879. <6>[ 6.856963] tegra-xudc-new 700d0000.xudc: device mode on: 0
  880. <6>[ 6.856974] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
  881. <6>[ 6.856998] tegra-xudc-new 700d0000.xudc: active: 0 => 1
  882. <6>[ 6.857791] mousedev: PS/2 mouse device common for all mice
  883. <6>[ 6.858166] usbcore: registered new interface driver xpad
  884. <6>[ 6.858202] usbcore: registered new interface driver usb_acecad
  885. <6>[ 6.858235] usbcore: registered new interface driver aiptek
  886. <6>[ 6.858267] usbcore: registered new interface driver gtco
  887. <6>[ 6.858298] usbcore: registered new interface driver hanwang
  888. <6>[ 6.858335] usbcore: registered new interface driver kbtab
  889. <6>[ 7.051968] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
  890. <6>[ 7.072790] rtc rtc1: alarm rtc device
  891. <6>[ 7.072802] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
  892. <5>[ 7.072829] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
  893. <6>[ 7.073345] i2c /dev entries driver
  894. <6>[ 7.074689] IR NEC protocol handler initialized
  895. <6>[ 7.075067] usbcore: registered new interface driver uvcvideo
  896. <6>[ 7.075069] USB Video Class driver (1.1.1)
  897. <6>[ 7.075402] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
  898. <6>[ 7.096648] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
  899. <6>[ 7.096652] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
  900. <6>[ 7.097126] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
  901. <6>[ 7.097136] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
  902. <6>[ 7.097317] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
  903. <6>[ 7.097637] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
  904. <6>[ 7.097642] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
  905. <6>[ 7.097793] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when mem reaches 103000 mC
  906. <6>[ 7.097800] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when mem reaches 101000 mC
  907. <6>[ 7.104320] tegra_aotag tegra-aotag: Registering sensor 0
  908. <6>[ 7.104369] tegra_aotag tegra-aotag: Invalid temp readout
  909. <6>[ 7.104396] tegra_aotag tegra-aotag: Invalid temp readout
  910. <6>[ 7.104412] tegra_aotag tegra-aotag: Bound to TZ : ID 0
  911. <6>[ 7.104421] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
  912. <6>[ 7.105191] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
  913. <6>[ 7.105348] tegra_aotag tegra-aotag: Invalid temp readout
  914. <6>[ 7.105379] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
  915. <6>[ 7.107155] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
  916. <6>[ 7.107583] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 0)
  917. <6>[ 7.108352] device-mapper: uevent: version 1.0.3
  918. <6>[ 7.108889] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  919. <6>[ 7.109791] Bluetooth: HCI UART driver ver 2.3
  920. <6>[ 7.109798] Bluetooth: HCI UART protocol LL registered
  921. <3>[ 7.112032] Failed to get dvfs structure
  922. <6>[ 7.122186] tegra210-cpufreq cpufreq: probe()...completed
  923. <6>[ 7.122981] sdhci: Secure Digital Host Controller Interface driver
  924. <6>[ 7.122982] sdhci: Copyright(c) Pierre Ossman
  925. <6>[ 7.123024] sdhci-pltfm: SDHCI platform and OF driver helper
  926. <6>[ 7.123501] sdhci-tegra sdhci-tegra.0: Got CD GPIO
  927. <6>[ 7.123853] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
  928. <6>[ 7.123980] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 261
  929. <3>[ 7.124311] leds_pwm pwm-leds: unable to request PWM for led_lightbar: -517
  930. <6>[ 7.124598] hidraw: raw HID events driver (C) Jiri Kosina
  931. <6>[ 7.128124] usbcore: registered new interface driver usbhid
  932. <6>[ 7.128125] usbhid: USB HID core driver
  933. <6>[ 7.128474] ashmem: initialized
  934. <4>[ 7.128635] tegra-nvdumper: probe of nvdumper failed with error -524
  935. <6>[ 7.136823] parse_throttle_dt_data: Num cap clks = 6
  936. <6>[ 7.136826] parse_throttle_dt_data: clk=cclk_g type=2
  937. <6>[ 7.136831] parse_throttle_dt_data: clk=gpu type=4
  938. <6>[ 7.136857] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
  939. <6>[ 7.136869] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
  940. <6>[ 7.136883] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
  941. <6>[ 7.136886] parse_throttle_dt_data: clk=emc type=3
  942. <6>[ 7.142943] tegra_throttle_probe: probe successful. #cdevs=4
  943. <6>[ 7.143816] tegra21x_actmon 6000c800.actmon: in actmon_register()...
  944. <6>[ 7.150854] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
  945. <6>[ 7.151128] Denver: backdoor interface is NOT available.
  946. <6>[ 7.151396] nvadsp 702ef000.adsp: in probe()...
  947. <6>[ 7.151691] nvadsp 702ef000.adsp: nvadsp_app_module_probe
  948. <6>[ 7.152364] tegra_hv: get_hvd: not initialized yet
  949. <6>[ 7.152367] user_ivc_mempool: hypervisor not present
  950. <6>[ 7.153968] usbcore: registered new interface driver snd-usb-audio
  951. <6>[ 7.154021] No Device Node present for smmu client: snd-soc-dummy !!
  952. <5>[ 7.154024] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
  953. <6>[ 7.154042] iommu: Adding device snd-soc-dummy to group 36
  954. <6>[ 7.155095] sch_tegra_init
  955. <6>[ 7.155097] u32 classifier
  956. <6>[ 7.155098] Actions configured
  957. <6>[ 7.155101] Netfilter messages via NETLINK v0.30.
  958. <6>[ 7.155361] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  959. <6>[ 7.155645] ctnetlink v0.93: registering with nfnetlink.
  960. <6>[ 7.156149] xt_time: kernel timezone is -0000
  961. <6>[ 7.156284] ip_tables: (C) 2000-2006 Netfilter Core Team
  962. <6>[ 7.156368] arp_tables: arp_tables: (C) 2002 David S. Miller
  963. <6>[ 7.156393] Initializing XFRM netlink socket
  964. <6>[ 7.158446] NET: Registered protocol family 10
  965. <6>[ 7.159282] mip6: Mobile IPv6
  966. <6>[ 7.159292] ip6_tables: (C) 2000-2006 Netfilter Core Team
  967. <6>[ 7.159469] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  968. <6>[ 7.159845] NET: Registered protocol family 17
  969. <6>[ 7.159854] NET: Registered protocol family 15
  970. <6>[ 7.159933] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  971. <6>[ 7.159936] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  972. <6>[ 7.159942] Bluetooth: HIDP socket layer initialized
  973. <6>[ 7.159972] 8021q: 802.1Q VLAN Support v1.8
  974. <5>[ 7.159992] Key type dns_resolver registered
  975. <5>[ 7.160370] Registered cp15_barrier emulation handler
  976. <5>[ 7.160373] Registered setend emulation handler
  977. <6>[ 7.161982] registered taskstats version 1
  978. <5>[ 7.176506] Key type encrypted registered
  979. <6>[ 7.176992] Adding domain ve2-pd to PM domain host1x-pd
  980. <6>[ 7.177242] Adding domain ve-pd to PM domain host1x-pd
  981. <6>[ 7.183498] isp 54600000.isp: initialized
  982. <6>[ 7.184353] isp 54680000.isp: initialized
  983. <6>[ 7.210983] last reset is due to tegra watchdog timeout
  984. <6>[ 7.210986] KERNEL: PMC reset status reg: 0x1
  985. <6>[ 7.211039] BL: PMC reset status reg: 0x1
  986. <6>[ 7.211040] BL: PMIC poweroff Event Recorder: 0x0
  987. <4>[ 7.766232] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
  988. <4>[ 7.776150] tegra-xusb 70090000.xusb: Falling back to user helper
  989. <6>[ 7.788231] tegra_dvfs: Unable to get vdd-gpu rail for step info, defering probe
  990. <3>[ 7.796312] pwm-regulator pwm_regulators:pwm-regulator@1: Failed to get PWM: -517
  991. <3>[ 7.804584] leds_pwm pwm-leds: unable to request PWM for led_lightbar: -517
  992. <6>[ 7.812246] input: gpio-keys as /devices/gpio-keys/input/input0
  993. <5>[ 7.818651] tegra_cec 70015000.tegra_cec: Sent <Text View On> res: 0.
  994. <6>[ 7.825995] tegra_dvfs: Unable to get vdd-gpu rail for step info, defering probe
  995. <3>[ 7.833986] pwm-regulator pwm_regulators:pwm-regulator@1: Failed to get PWM: -517
  996. <3>[ 7.842277] leds_pwm pwm-leds: unable to request PWM for led_lightbar: -517
  997. <6>[ 7.849577] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!